-
The Science Performance of the Gemini High Resolution Optical Spectrograph
Authors:
Alan W. McConnachie,
Christian R. Hayes,
J. Gordon Robertson,
John Pazder,
Michael Ireland,
Greg Burley,
Vladimir Churilov,
Jordan Lothrop,
Ross Zhelem,
Venu Kalari,
André Anthony,
Gabriella Baker,
Trystyn Berg,
Edward L. Chapin,
Timothy Chin,
Adam Densmore,
Ruben Diaz,
Jennifer Dunn,
Michael L. Edgar,
Tony Farrell,
Veronica Firpo,
Javier Fuentes,
Manuel Gomez-Jimenez,
Tim Hardy,
David Henderson
, et al. (24 additional authors not shown)
Abstract:
The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resol…
▽ More
The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resolution modes are obtained by using integral field units to image slice a 1.2" aperture by a factor of five in width using 19 fibers in the high resolution mode and by a factor of three in width using 7 fibers in the standard resolution mode. GHOST is equipped with hardware to allow for precision radial velocity measurements, expected to approach meters per second precision. Here, we describe the basic design and operational capabilities of GHOST, and proceed to derive and quantify the key aspects of its on-sky performance that are of most relevance to its science users.
△ Less
Submitted 14 January, 2024;
originally announced January 2024.
-
GHOST Commissioning Science Results: Identifying a new chemically peculiar star in Reticulum II
Authors:
Christian R. Hayes,
Kim A. Venn,
Fletcher Waller,
Jaclyn Jensen,
Alan W. McConnachie,
John Pazder,
Federico Sestito,
Andre Anthony,
Gabriella Baker,
John Bassett,
Joao Bento,
Gregory Burley,
Jurek Brzeski,
Scott Case,
Edward Chapin,
Timothy Chin,
Eric Chisholm,
Vladimir Churilov,
Adam Densmore,
Ruben Diaz,
Jennifer Dunn,
Michael Edgar,
Tony Farrell,
Veronica Firpo,
Joeleff Fitzsimmons
, et al. (57 additional authors not shown)
Abstract:
The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, alon…
▽ More
The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, along with two stars in the ultra faint dwarf galaxy, Ret II, one of which was previously identified as a candidate member, but did not have a previous detailed chemical abundance analysis. This star (GDR3 0928) is found to be a bona fide member of Ret II, and from a spectral synthesis analysis, it is also revealed to be a CEMP-r star, with significant enhancements in the several light elements (C, N, O, Na, Mg, and Si), in addition to featuring an r-process enhancement like many other Ret II stars. The light-element enhancements in this star resemble the abundance patterns seen in the CEMP-no stars of other ultra faint dwarf galaxies, and are thought to have been produced by an independent source from the r-process. These unusual abundance patterns are thought to be produced by faint supernovae, which may be produced by some of the earliest generations of stars.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
4MOST: Project overview and information for the First Call for Proposals
Authors:
R. S. de Jong,
O. Agertz,
A. Agudo Berbel,
J. Aird,
D. A. Alexander,
A. Amarsi,
F. Anders,
R. Andrae,
B. Ansarinejad,
W. Ansorge,
P. Antilogus,
H. Anwand-Heerwart,
A. Arentsen,
A. Arnadottir,
M. Asplund,
M. Auger,
N. Azais,
D. Baade,
G. Baker,
S. Baker,
E. Balbinot,
I. K. Baldry,
M. Banerji,
S. Barden,
P. Barklem
, et al. (313 additional authors not shown)
Abstract:
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolut…
▽ More
We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolution spectrographs ($R = λ/Δλ\sim 6500$), and 812 fibres transferring light to the high-resolution spectrograph ($R \sim 20\,000$). After a description of the instrument and its expected performance, a short overview is given of its operational scheme and planned 4MOST Consortium science; these aspects are covered in more detail in other articles in this edition of The Messenger. Finally, the processes, schedules, and policies concerning the selection of ESO Community Surveys are presented, commencing with a singular opportunity to submit Letters of Intent for Public Surveys during the first five years of 4MOST operations.
△ Less
Submitted 1 April, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
The Maunakea Spectroscopic Explorer Book 2018
Authors:
Alexis Hill,
Nicolas Flagey,
Alan McConnachie,
Kei Szeto,
Andre Anthony,
Javier Ariño,
Ferdinand Babas,
Gregoire Bagnoud,
Gabriella Baker,
Gregory Barrick,
Steve Bauman,
Tom Benedict,
Christophe Berthod,
Armando Bilbao,
Alberto Bizkarguenaga,
Alexandre Blin,
Colin Bradley,
Denis Brousseau,
Rebecca Brown,
Jurek Brzeski,
Walter Brzezik,
Patrick Caillier,
Ramón Campo,
Pierre-Henri Carton,
Jiaru Chu
, et al. (100 additional authors not shown)
Abstract:
(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review,…
▽ More
(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review, held in January 2018. MSE is a planned 10-m class, wide-field, optical and near-infrared facility, designed to enable transformative science, while filling a critical missing gap in the emerging international network of large-scale astronomical facilities. MSE is completely dedicated to multi-object spectroscopy of samples of between thousands and millions of astrophysical objects. It will lead the world in this arena, due to its unique design capabilities: it will boast a large (11.25 m) aperture and wide (1.52 sq. degree) field of view; it will have the capabilities to observe at a wide range of spectral resolutions, from R2500 to R40,000, with massive multiplexing (4332 spectra per exposure, with all spectral resolutions available at all times), and an on-target observing efficiency of more than 80%. MSE will unveil the composition and dynamics of the faint Universe and is designed to excel at precision studies of faint astrophysical phenomena. It will also provide critical follow-up for multi-wavelength imaging surveys, such as those of the Large Synoptic Survey Telescope, Gaia, Euclid, the Wide Field Infrared Survey Telescope, the Square Kilometre Array, and the Next Generation Very Large Array.
△ Less
Submitted 24 October, 2018; v1 submitted 19 October, 2018;
originally announced October 2018.
-
Follow up of GW170817 and its electromagnetic counterpart by Australian-led observing programs
Authors:
I. Andreoni,
K. Ackley,
J. Cooke,
A. Acharyya,
J. R. Allison,
G. E. Anderson,
M. C. B. Ashley,
D. Baade,
M. Bailes,
K. Bannister,
A. Beardsley,
M. S. Bessell,
F. Bian,
P. A. Bland,
M. Boer,
T. Booler,
A. Brandeker,
I. S. Brown,
D. Buckley,
S. -W. Chang,
D. M. Coward,
S. Crawford,
H. Crisp,
B. Crosse,
A. Cucchiara
, et al. (100 additional authors not shown)
Abstract:
The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescope…
▽ More
The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source afterglow cooled from approximately 6400K to 2100K over a 7-day period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (about 2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
AAO Starbugs: software control and associated algorithms
Authors:
Nuria P. F. Lorente,
Minh V. Vuong,
Keith Shortridge,
Tony J. Farrell,
Scott Smedley,
Sungwook E. Hong,
Carlos Bacigalupo,
Michael Goodwin,
Kyler Kuehn,
Christophe Satorre
Abstract:
The Australian Astronomical Observatory's TAIPAN instrument deploys 150 Starbug robots to position optical fibres to accuracies of 0.3 arcsec, on a 32 cm glass field plate on the focal plane of the 1.2 m UK-Schmidt telescope. This paper describes the software system developed to control and monitor the Starbugs, with particular emphasis on the automated path-finding algorithms, and the metrology s…
▽ More
The Australian Astronomical Observatory's TAIPAN instrument deploys 150 Starbug robots to position optical fibres to accuracies of 0.3 arcsec, on a 32 cm glass field plate on the focal plane of the 1.2 m UK-Schmidt telescope. This paper describes the software system developed to control and monitor the Starbugs, with particular emphasis on the automated path-finding algorithms, and the metrology software which keeps track of the position and motion of individual Starbugs as they independently move in a crowded field. The software employs a tiered approach to find a collision-free path for every Starbug, from its current position to its target location. This consists of three path-finding stages of increasing complexity and computational cost. For each Starbug a path is attempted using a simple method. If unsuccessful, subsequently more complex (and expensive) methods are tried until a valid path is found or the target is flagged as unreachable.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
First Light Results from the Hermes Spectrograph at the AAT
Authors:
Andrew Sheinis,
Borja Anguiano,
Martin Asplund,
Carlos Bacigalupo,
Sam Barden,
Michael Birchall,
Joss Bland-Hawthorn,
Jurek Brzeski,
Russell Cannon,
Daniela Carollo,
Scott Case,
Andrew Casey,
Vladimir Churilov,
Couch Warrick,
Robert Dean,
Gayandhi De Silva,
Valentina D'Orazi,
Ly Duong,
Tony Farrell,
Kristin Fiegert,
Kenneth Freeman,
Frost Gabriella,
Luke Gers,
Michael Goodwin,
Doug Gray
, et al. (38 additional authors not shown)
Abstract:
The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstru…
▽ More
The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V ?= 14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.
△ Less
Submitted 31 August, 2015;
originally announced September 2015.
-
CYCLOPS2: the fibre image slicer upgrade for the UCLES high resolution spectrograph
Authors:
Anthony Horton,
C. G. Tinney,
Scott Case,
Tony Farrell,
Luke Gers,
Damien Jones,
Jon Lawrence,
Stan Miziarski,
Nick Staszak,
David Orr,
Minh Vuong,
Lew Waller,
Ross Zhelem
Abstract:
CYCLOPS2 is an upgrade for the UCLES high resolution spectrograph on the Anglo-Australian Telescope, scheduled for commissioning in semester 2012A. By replacing the 5 mirror Coudé train with a Cassegrain mounted fibre-based image slicer CYCLOPS2 simultaneously provides improved throughput, reduced aperture losses and increased spectral resolution. Sixteen optical fibres collect light from a 5.0 ar…
▽ More
CYCLOPS2 is an upgrade for the UCLES high resolution spectrograph on the Anglo-Australian Telescope, scheduled for commissioning in semester 2012A. By replacing the 5 mirror Coudé train with a Cassegrain mounted fibre-based image slicer CYCLOPS2 simultaneously provides improved throughput, reduced aperture losses and increased spectral resolution. Sixteen optical fibres collect light from a 5.0 arcsecond^2 area of sky and reformat it into the equivalent of a 0.6 arcsecond wide slit, delivering a spectral resolution of R = 70000 and up to twice as much flux as the standard 1 arcsecond slit of the Coudé train. CYCLOPS2 also adds support for simultaneous ThAr wavelength calibration via a dedicated fibre. CYCLOPS2 consists of three main components, the fore-optics unit, fibre bundle and slit unit. The fore optics unit incorporates magnification optics and a lenslet array and is designed to mount to the CURE Cassegrain instrument interface, which provides acquisition, guiding and calibration facilities. The fibre bundle transports the light from the Cassegrain focus to the UCLES spectrograph at Coudé and also includes a fibre mode scrambler. The slit unit consists of the fibre slit and relay optics to project an image of the slit onto the entrance aperture of the UCLES spectrograph. CYCLOPS2 builds on experience with the first generation CYCLOPS fibre system, which we also describe in this paper. We present the science case for an image slicing fibre feed for echelle spectroscopy and describe the design of CYCLOPS and CYCLOPS2.
△ Less
Submitted 3 January, 2013;
originally announced January 2013.
-
SAMI Automated Plug Plate Configuration
Authors:
Nuria P. F. Lorente,
Tony Farrell,
Michael Goodwin
Abstract:
The Sydney-AAO Multi-object Integral field spectrograph (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) which uses a plug-plate to mount its 13 x 61-core imaging fibre bundles (hexabundles) in the optical path at the telescope's prime focus. In this paper we describe the process of determining the positions of the plug-plate holes, where plates contain three or more…
▽ More
The Sydney-AAO Multi-object Integral field spectrograph (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) which uses a plug-plate to mount its 13 x 61-core imaging fibre bundles (hexabundles) in the optical path at the telescope's prime focus. In this paper we describe the process of determining the positions of the plug-plate holes, where plates contain three or more stacked observation configurations. The process, which up until now has involved several separate processes and has required significant manual configuration and checking, is now being automated to increase efficiency and reduce error. This is carried out by means of a thin Java controller layer which drives the configuration cycle. This layer controls the user interface and the C++ algorithm layer where the plate configuration and optimisation is carried out. Additionally, through the Aladin display package, it provides visualisation and facilitates user verification of the resulting plates.
△ Less
Submitted 12 December, 2012;
originally announced December 2012.
-
First Science with SAMI: A Serendipitously Discovered Galactic Wind in ESO 185-G031
Authors:
Lisa M. R. Fogarty,
Joss Bland-Hawthorn,
Scott M. Croom,
Andrew W. Green,
Julia J. Bryant,
Jon S. Lawrence,
Samuel Richards,
James T. Allen,
Amanda E. Bauer,
Michael N. Birchall,
Sarah Brough,
Matthew Colless,
Simon C. Ellis,
Tony Farrell,
Michael Goodwin,
Ron Heald,
Andrew M. Hopkins,
Anthony Horton,
D. Heath Jones,
Steve Lee,
Geraint Lewis,
Ángel R. López-Sánchez,
Stan Miziarski,
Holly Trowland,
Sergio G. Leon-Saval
, et al. (5 additional authors not shown)
Abstract:
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found…
▽ More
We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fibre bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially-resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionisation and kinematic properties consistent with a large-scale galactic wind. The importance of this result is two-fold: (i) fibre bundle spectrographs are able to identify low-surface brightness emission arising from extranuclear activity; (ii) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibres and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
The Sydney-AAO Multi-object Integral field spectrograph (SAMI)
Authors:
Scott M. Croom,
Jon S. Lawrence,
Joss Bland-Hawthorn,
Julia J. Bryant,
Lisa Fogarty,
Samuel Richards,
Michael Goodwin,
Tony Farrell,
Stan Miziarski,
Ron Heald,
D. Heath Jones,
Steve Lee,
Matthew Colless,
Sarah Brough,
Andrew M. Hopkins,
Amanda E. Bauer,
Michael N. Birchall,
Simon Ellis,
Anthony Horton,
Sergio Leon-Saval,
Geraint Lewis,
A. R. Lopez-Sanchez,
Seong-Sik Min,
Christopher Trinh,
Holly Trowland
Abstract:
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabu…
▽ More
We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ("hexabundles") to be deployed over a 1-degree diameter field of view. Each hexabundle comprises 61 lightly-fused multimode fibres with reduced cladding and yields a 75 percent filling factor. Each fibre core diameter subtends 1.6 arcseconds on the sky and each hexabundle has a field of view of 15 arcseconds diameter. The fibres are fed to the flexible AAOmega double-beam spectrograph, which can be used at a range of spectral resolutions (R=lambda/delta(lambda) ~ 1700-13000) over the optical spectrum (3700-9500A). We present the first spectroscopic results obtained with SAMI for a sample of galaxies at z~0.05. We discuss the prospects of implementing hexabundles at a much higher multiplex over wider fields of view in order to carry out spatially--resolved spectroscopic surveys of 10^4 to 10^5 galaxies.
△ Less
Submitted 14 December, 2011;
originally announced December 2011.
-
The Fibre Multi-Object Spectrograph (FMOS) for Subaru Telescope
Authors:
Masahiko Kimura,
Toshinori Maihara,
Fumihide Iwamuro,
Masayuki Akiyama,
Naoyuki Tamura,
Gavin B. Dalton,
Naruhisa Takato,
Philip Tait,
Kouji Ohta,
Shigeru Eto,
Daisaku Mochida,
Brian Elms,
Kaori Kawate,
Tomio Kurakami,
Yuuki Moritani,
Junichi Noumaru,
Norio Ohshima,
Masanao Sumiyoshi,
Kiyoto Yabe,
Jurek Brzeski,
Tony Farrell,
Gabriella Frost,
Peter R. Gillingham,
Roger Haynes,
Anna M. Moore
, et al. (17 additional authors not shown)
Abstract:
Fibre Multi-Object Spectrograph (FMOS) is the first near-infrared instrument with a wide field of view capable of acquiring spectra simultaneously from up to 400 objects. It has been developed as a common-use instrument for the F/2 prime-focus of the Subaru Telescope. The field coverage of 30' diameter is achieved using a new 3-element corrector optimized in the near-infrared (0.9-1.8um) wavelengt…
▽ More
Fibre Multi-Object Spectrograph (FMOS) is the first near-infrared instrument with a wide field of view capable of acquiring spectra simultaneously from up to 400 objects. It has been developed as a common-use instrument for the F/2 prime-focus of the Subaru Telescope. The field coverage of 30' diameter is achieved using a new 3-element corrector optimized in the near-infrared (0.9-1.8um) wavelength range. Due to limited space at the prime-focus, we have had to develop a novel fibre positioner called "Echidna" together with two OH-airglow suppressed spectrographs. FMOS consists of three subsystems: the prime focus unit for IR, the fibre positioning system/connector units, and the two spectrographs. After full systems integration, FMOS was installed on the telescope in late 2007. Many aspects of performance were checked through various test and engineering observations. In this paper, we present the optical and mechanical components of FMOS and show the results of our on-sky engineering observations to date.
△ Less
Submitted 15 June, 2010;
originally announced June 2010.
-
The Anglo-Australian Observatory's 2dF Facility
Authors:
I. J. Lewis,
R. D. Cannon,
K. Taylor,
K. Glazebrook,
J. A. Bailey,
I. K. Baldry,
J. R. Barton,
T. J. Bridges,
G. B. Dalton,
T. J. Farrell,
P. M. Gray,
A. Lankshear,
C. McCowage,
I. R. Parry,
R. M. Sharples,
K. Shortridge,
G. A. Smith,
J. Stevenson,
J. O. Straede,
L. G. Waller,
J. D. Whittard,
J. K. Wilcox,
K. C. Willis
Abstract:
The 2dF (Two-degree Field) facility at the prime focus of the Anglo-Australian Telescope provides multiple object spectroscopy over a 2 degree field of view. Up to 400 target fibres can be independently positioned by a complex robot. Two spectrographs provide spectra with resolutions of between 500 and 2000, over wavelength ranges of 440nm and 110nm respectively. The 2dF facility began routine o…
▽ More
The 2dF (Two-degree Field) facility at the prime focus of the Anglo-Australian Telescope provides multiple object spectroscopy over a 2 degree field of view. Up to 400 target fibres can be independently positioned by a complex robot. Two spectrographs provide spectra with resolutions of between 500 and 2000, over wavelength ranges of 440nm and 110nm respectively. The 2dF facility began routine observations in 1997.
2dF was designed primarily for galaxy redshift surveys and has a number of innovative features. The large corrector lens incorporates an atmospheric dispersion compensator, essential for wide wavelength coverage with small diameter fibres. The instrument has two full sets of fibres on separate field plates, so that re-configuring can be done in parallel with observing. The robot positioner places one fibre every 6 seconds, to a precision of 0.3 arcsec (20micron) over the full field. All components of 2dF, including the spectrographs, are mounted on a 5-m diameter telescope top-end ring for ease of handling and to keep the optical fibres short in order to maximise UV throughput . There is a pipeline data reduction system which allows each data set to be fully analysed while the next field is being observed.
In this paper we provide the historical background to the 2dF facility, the design philosophy, a full technical description and a summary of the performance of the instrument. We also briefly review its scientific applications and possible future developments.
△ Less
Submitted 8 February, 2002;
originally announced February 2002.