-
A star-based method for precise flux calibration of the Chinese Space Station Telescope (CSST) slitless spectroscopic survey
Authors:
Lin Yang,
Haibo Yuan,
Fuqing Duan,
Ruoyi Zhang,
Bowen Huang,
Kai Xiao,
Shuai Xu,
Jinming Zhang
Abstract:
The upcoming Chinese Space Station Telescope (CSST) slitless spectroscopic survey poses a challenge of flux calibration, which requires a large number of flux-standard stars. In this work, we design an uncertainty-aware residual attention network, the UaRA-net, to derive the CSST SEDs with a resolution of R = 200 over the wavelength range of 2500-10000 Åusing LAMOST normalized spectra with a resol…
▽ More
The upcoming Chinese Space Station Telescope (CSST) slitless spectroscopic survey poses a challenge of flux calibration, which requires a large number of flux-standard stars. In this work, we design an uncertainty-aware residual attention network, the UaRA-net, to derive the CSST SEDs with a resolution of R = 200 over the wavelength range of 2500-10000 Åusing LAMOST normalized spectra with a resolution of R = 2000 over the wavelength range of 4000-7000 Å. With the special structure and training strategy, the proposed model can not only provide accurate predictions of SEDs but also their corresponding errors. The precision of the predicted SEDs depends on effective temperature (Teff), wavelength, and the LAMOST spectral signal-to-noise ratios (SNRs), particularly in the GU band. For stars with Teff = 6000 K, the typical SED precisions in the GU band are 4.2%, 2.1%, and 1.5% at SNR values of 20, 40, and 80, respectively. As Teff increases to 8000 K, the precision increases to 1.2%, 0.6%, and 0.5%, respectively. The precision is higher at redder wavelengths. In the GI band, the typical SED precisions for stars with Teff = 6000 K increase to 0.3%, 0.1%, and 0.1% at SNR values of 20, 40, and 80, respectively. We further verify our model using the empirical spectra of the MILES and find good performance. The proposed method will open up new possibilities for optimal utilization of slitless spectra of the CSST and other surveys.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Discovery of Two Different Full Disk Evolutionary Patterns of M-type T Tauri Stars with LAMOST DR8
Authors:
Hasitieer Haerken,
Guang-Wei Li,
Min Li,
Fuqing Duan,
Yongheng Zhao
Abstract:
The full disk, full of gas and dust, determines the upper limit of planet masses, and its lifetime is critical for planet formation, especially for giant planets. In this work, we studied the evolutionary timescales of the full disks of T Tauri stars (TTSs) and their relations to accretion. Combined with Gaia EDR3, 2MASS, and WISE data, 1077 disk-bearing TTS candidates were found in LAMOST DR8, an…
▽ More
The full disk, full of gas and dust, determines the upper limit of planet masses, and its lifetime is critical for planet formation, especially for giant planets. In this work, we studied the evolutionary timescales of the full disks of T Tauri stars (TTSs) and their relations to accretion. Combined with Gaia EDR3, 2MASS, and WISE data, 1077 disk-bearing TTS candidates were found in LAMOST DR8, and stellar parameters were obtained. Among them, 783 are newly classified by spectra as classical T Tauri stars (CTTSs; 169) or weak-lined T Tauri stars (WTTSs). Based on EW and FWHM of Ha, 157 TTSs in accretion were identified, with ~ 82% also having full disks. For TTSs with M<0.35 Mo, about 80% seem to already lose their full disks at ~ 0.1 Myr, which may explain their lower mass, while the remaining 20% with full disks evolve at similar rates of non-full disks within 5 Myr, possibly suffice to form giant planets. The fraction of accreting TTSs to disk-bearing TTSs is stable at ~10% and can last $\sim$ 5-10 Myr, suggesting that full disks and accretion evolve with similar rates as non-full disks. For TTSs with M>0.35Mo, almost all full disks can survive more than 0.1 Myr, most for 1 Myr and some even for 20 Myr, which implies planets are more likely to be formed in their disks than those of M<0.35 Mo, and thus M dwarfs with M>0.35Mo can have more planets. The fraction of full-disk TTSs to disk-bearing TTSs decreases with age following the relation $f\propto t^{-0.35}$, and similar relations existed in the fraction of accreting TTSs and the fraction of full-disk CTTSs, suggesting faster full disks and accretion evolution than non-full disks. For full disk stars, the ratio of accretion of lower-mass stars is systematically lower than that of higher-mass stars, confirming the dependence of accretion on stellar mass.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Individual pulse emission from the diffuse drifter PSR J1401$-$6357 using the ultrawideband receiver on the Parkes radio telescope
Authors:
J. L. Chen,
Z. G. Wen,
X. F. Duan,
D. L. He,
N. Wang,
H. G. Wang,
R. Yuen,
J. P. Yuan,
W. M. Yan,
Z. Wang,
C. B. Lv,
H. Wang,
S. R. Cui
Abstract:
In this study, we report on a detailed single pulse analysis of the radio emission from the pulsar J1401$-$6357 (B1358$-$63) based on data observed with the ultrawideband low-frequency receiver on the Parkes radio telescope. In addition to a weak leading component, the integrated pulse profile features a single-humped structure with a slight asymmetry. The frequency evolution of the pulse profile…
▽ More
In this study, we report on a detailed single pulse analysis of the radio emission from the pulsar J1401$-$6357 (B1358$-$63) based on data observed with the ultrawideband low-frequency receiver on the Parkes radio telescope. In addition to a weak leading component, the integrated pulse profile features a single-humped structure with a slight asymmetry. The frequency evolution of the pulse profile is studied. Well-defined nulls, with an estimated nulling fraction greater than 2\%, are present across the whole frequency band. No emission is detected with significance above 3$σ$ in the average pulse profile integrated over all null pulses. Using fluctuation spectral analysis, we reveal the existence of temporal-dependent subpulse drifting in this pulsar for the first time. A clear double-peaked feature is present at exactly the alias border across the whole frequency band, which suggests that the apparent drift sense changes during the observation. Our observations provide further confirmation that the phenomena of pulse nulling and subpulse drifting are independent of observing frequency, which suggest that they invoke changes on the global magnetospheric scale.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
The miniJPAS survey: stellar atmospheric parameters from 56 optical filters
Authors:
H. -B. Yuan,
L. Yang,
P. Cruz,
F. Jiménez-Esteban,
S. Daflon,
V. M. Placco,
S. Akras,
E. J. Alfaro,
C. Andrés Galarza,
D. R. Gonçalves,
F. -Q. Duan,
J. -F. Liu,
J. Laur,
E. Solano,
M. Borges Fernandes,
A. J. Cenarro,
A. Marín-Franch,
J. Varela,
A. Ederoclite,
Carlos López-Sanjuan,
R. Abramo,
J. Alcaniz,
N. Benítez,
S. Bonoli,
D. Cristóbal-Hornillos
, et al. (7 additional authors not shown)
Abstract:
With a unique set of 54 overlapping narrow-band and two broader filters covering the entire optical range, the incoming Javalambre-Physics of the Accelerating Universe Astrophysical Survey (J-PAS) will provide a great opportunity for stellar physics and near-field cosmology. In this work, we use the miniJPAS data in 56 J-PAS filters and 4 complementary SDSS-like filters to explore and prove the po…
▽ More
With a unique set of 54 overlapping narrow-band and two broader filters covering the entire optical range, the incoming Javalambre-Physics of the Accelerating Universe Astrophysical Survey (J-PAS) will provide a great opportunity for stellar physics and near-field cosmology. In this work, we use the miniJPAS data in 56 J-PAS filters and 4 complementary SDSS-like filters to explore and prove the potential of the J-PAS filter system in characterizing stars and deriving their atmospheric parameters. We obtain estimates for the effective temperature with a good precision (<150 K) from spectral energy distribution fitting. We have constructed the metallicity-dependent stellar loci in 59 colours for the miniJPAS FGK dwarf stars, after correcting certain systematic errors in flat-fielding. The very blue colours, including uJAVA-r, J0378-r, J0390-r, uJPAS-r, show the strongest metallicity dependence, around 0.25 mag/dex. The sensitivities decrease to about 0.1 mag/dex for the J0400-r, J0410-r, and J0420-r colours. The locus fitting residuals show peaks at the J0390, J0430, J0510, and J0520 filters, suggesting that individual elemental abundances such as [Ca/Fe], [C/Fe], and [Mg/Fe] can also be determined from the J-PAS photometry. Via stellar loci, we have achieved a typical metallicity precision of 0.1 dex. The miniJPAS filters also demonstrate strong potential in discriminating dwarfs and giants, particularly the J0520 and J0510 filters. Our results demonstrate the power of the J-PAS filter system in stellar parameter determinations and the huge potential of the coming J-PAS survey in stellar and Galactic studies.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
J-PLUS: Stellar Parameters, C, N, Mg, Ca and [α/Fe] Abundances for Two Million Stars from DR1
Authors:
Lin Yang,
Haibo Yuan,
Maosheng Xiang,
Fuqing Duan,
Yang Huang,
Jifeng Liu,
Timothy C. Beers,
Carlos Andrés Galarza,
Simone Daflon,
J. A. Fernández-Ontiveros,
Javier Cenarro,
David Cristóbal-Hornillos,
Carlos Hernández-Monteagudo,
Carlos López-Sanjuan,
Antonio Marín-Franch,
Mariano Moles,
Jesús Varela,
Héctor Vázquez Ramió,
Jailson Alcaniz,
Renato Dupke,
Alessandro Ederoclite,
Laerte Sodré Jr.,
Raul E. Angulo
Abstract:
Context. The Javalambre Photometric Local Universe Survey (J-PLUS) has obtained precise photometry in twelve specially designed filters for large numbers of Galactic stars. Deriving their precise stellar atmospheric parameters and individual elemental abundances is crucial for studies of Galactic structure, and the assembly history and chemical evolution of our Galaxy. Aims. Our goal is to estimat…
▽ More
Context. The Javalambre Photometric Local Universe Survey (J-PLUS) has obtained precise photometry in twelve specially designed filters for large numbers of Galactic stars. Deriving their precise stellar atmospheric parameters and individual elemental abundances is crucial for studies of Galactic structure, and the assembly history and chemical evolution of our Galaxy. Aims. Our goal is to estimate not only stellar parameters (effective temperature, Teff, surface gravity, log g, and metallicity, [Fe/H]), but also [α/Fe] and four elemental abundances ([C/Fe], [N/Fe], [Mg/Fe], and [Ca/Fe]) using data from J-PLUS DR1. Methods. By combining recalibrated photometric data from J-PLUS DR1, Gaia DR2, and spectroscopic labels from LAMOST, we design and train a set of cost-sensitive neural networks, the CSNet, to learn the non-linear mapping from stellar colors to their labels. Results. We have achieved precisions of δTeff {\sim}55K, δlogg{\sim}0.15dex, and δ[Fe/H]{\sim}0.07dex, respectively, over a wide range of temperature, surface gravity, and metallicity. The uncertainties of the abundance estimates for [α/Fe] and the four individual elements are in the range 0.04-0.08 dex. We compare our parameter and abundance estimates with those from other spectroscopic catalogs such as APOGEE and GALAH, and find an overall good agreement. Conclusions. Our results demonstrate the potential of well-designed, high-quality photometric data for determinations of stellar parameters as well as individual elemental abundances. Applying the method to J-PLUS DR1, we have obtained the aforementioned parameters for about two million stars, providing an outstanding data set for chemo-dynamic analyses of the Milky Way. The catalog of the estimated parameters is publicly accessible.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
The $^{59}$Fe(n, γ)$^{60}$Fe Cross Section from the Surrogate Ratio Method and Its Effect on the $^{60}$Fe Nucleosynthesis
Authors:
S. Q. Yan,
X. Y. Li,
K. Nishio,
M. Lugaro,
Z. H. Li,
H. Makii,
M. Pignatari,
Y. B. Wang,
R. Orlandi,
K. Hirose,
K. Tsukada,
P. Mohr,
G. S. Li,
J. G. Wang,
B. S. Gao,
Y. L. Han,
B. Guo,
Y. J. Li,
Y. P. Shen,
T. K. Sato,
Y. Ito,
F. Suzaki,
J. Su,
Y. Y. Yang,
J. S. Wang
, et al. (17 additional authors not shown)
Abstract:
The long-lived $^{60}$Fe (with a half-life of 2.62 Myr) is a crucial diagnostic of active nucleosynthesis in the Milky Way galaxy and in supernovae near the solar system. The neutron-capture reaction $^{59}$Fe(n,$γ$)$^{60}$Fe on $^{59}$Fe (half-life = 44.5 days) is the key reaction for the production of $^{60}$Fe in massive stars. This reaction cross section has been previously constrained by the…
▽ More
The long-lived $^{60}$Fe (with a half-life of 2.62 Myr) is a crucial diagnostic of active nucleosynthesis in the Milky Way galaxy and in supernovae near the solar system. The neutron-capture reaction $^{59}$Fe(n,$γ$)$^{60}$Fe on $^{59}$Fe (half-life = 44.5 days) is the key reaction for the production of $^{60}$Fe in massive stars. This reaction cross section has been previously constrained by the Coulomb dissociation experiment, which offered partial constraint on the $E$1 $γ$-ray strength function but a negligible constraint on the $M$1 and $E$2 components. In this work, for the first time, we use the surrogate ratio method to experimentally determine the $^{59}$Fe(n,$γ$)$^{60}$Fe cross sections in which all the components are included. We derived a Maxwellian-averaged cross section of 27.5 $\pm$ 3.5 mb at $kT$= 30 keV and 13.4 $\pm$ 1.7 mb at $kT$= 90 keV, roughly 10 - 20% higher than previous estimates. We analyzed the impact of our new reaction rates in nucleosynthesis models of massive stars and found that uncertainties in the production of $^{60}$Fe from the $^{59}$Fe(n,$γ$)$^{60}$Fe rate are at most of 25%. We conclude that stellar physics uncertainties now play a major role in the accurate evaluation of the stellar production of $^{60}$Fe.
△ Less
Submitted 26 September, 2021;
originally announced September 2021.
-
Correction to the photometric magnitudes of the Gaia Early Data Release 3
Authors:
Lin Yang,
Haibo Yuan,
Ruoyi Zhang,
Zexi Niu,
Yang Huang,
Fuqing Duan,
Yi Fang
Abstract:
In this letter, we have carried out an independent validation of the Gaia EDR3 photometry using about 10,000 Landolt standard stars from Clem & Landolt (2013). Using a machine learning technique, the UBVRI magnitudes are converted into the Gaia magnitudes and colors and then compared to those in the EDR3, with the effect of metallicity incorporated. Our result confirms the significant improvements…
▽ More
In this letter, we have carried out an independent validation of the Gaia EDR3 photometry using about 10,000 Landolt standard stars from Clem & Landolt (2013). Using a machine learning technique, the UBVRI magnitudes are converted into the Gaia magnitudes and colors and then compared to those in the EDR3, with the effect of metallicity incorporated. Our result confirms the significant improvements in the calibration process of the Gaia EDR3. Yet modest trends up to 10 mmag with G magnitude are found for all the magnitudes and colors for the 10 < G < 19 mag range, particularly for the bright and faint ends. With the aid of synthetic magnitudes computed on the CALSPEC spectra with the Gaia EDR3 passbands, absolute corrections are further obtained, paving the way for optimal usage of the Gaia EDR3 photometry in high accuracy investigations.
△ Less
Submitted 13 January, 2021; v1 submitted 3 January, 2021;
originally announced January 2021.
-
The Richardson-Lucy Deconvolution method to Extract LAMOST 1D Spectra
Authors:
Min Li,
Guangwei Li,
Ke Lv,
Fuqing Duan,
Hasitieer Haerken,
Yongheng Zhao
Abstract:
We use the Richardson-Lucy deconvolution algorithm to extract one dimensional (1D) spectra from LAMOST spectrum images. Compared with other deconvolution algorithms, this algorithm is much more fast. The practice on a real LAMOST image illustrates that the 1D resulting spectrum of this method has a higher SNR and resolution than those extracted by the LAMOST pipeline. Furthermore, our algorithm ca…
▽ More
We use the Richardson-Lucy deconvolution algorithm to extract one dimensional (1D) spectra from LAMOST spectrum images. Compared with other deconvolution algorithms, this algorithm is much more fast. The practice on a real LAMOST image illustrates that the 1D resulting spectrum of this method has a higher SNR and resolution than those extracted by the LAMOST pipeline. Furthermore, our algorithm can effectively depress the ringings that are often shown in the 1D resulting spectra of other deconvolution methods.
△ Less
Submitted 20 May, 2019; v1 submitted 16 May, 2019;
originally announced May 2019.
-
Pulsar Candidate Identification with Artificial Intelligence Techniques
Authors:
Ping Guo,
Fuqing Duan,
Pei Wang,
Yao Yao,
Qian Yin,
Xin Xin
Abstract:
Discovering pulsars is a significant and meaningful research topic in the field of radio astronomy. With the advent of astronomical instruments such as he Five-hundred-meter Aperture Spherical Telescope (FAST) in China, data volumes and data rates are exponentially growing. This fact necessitates a focus on artificial intelligence (AI) technologies that can perform the automatic pulsar candidate i…
▽ More
Discovering pulsars is a significant and meaningful research topic in the field of radio astronomy. With the advent of astronomical instruments such as he Five-hundred-meter Aperture Spherical Telescope (FAST) in China, data volumes and data rates are exponentially growing. This fact necessitates a focus on artificial intelligence (AI) technologies that can perform the automatic pulsar candidate identification to mine large astronomical data sets. Automatic pulsar candidate identification can be considered as a task of determining potential candidates for further investigation and eliminating noises of radio frequency interferences or other non-pulsar signals. It is very hard to raise the performance of DCNN-based pulsar identification because the limited training samples restrict network structure to be designed deep enough for learning good features as well as the crucial class imbalance problem due to very limited number of real pulsar samples. To address these problems, we proposed a framework which combines deep convolution generative adversarial network (DCGAN) with support vector machine (SVM) to deal with imbalance class problem and to improve pulsar identification accuracy. DCGAN is used as sample generation and feature learning model, and SVM is adopted as the classifier for predicting candidate's labels in the inference stage. The proposed framework is a novel technique which not only can solve imbalance class problem but also can learn discriminative feature representations of pulsar candidates instead of computing hand-crafted features in preprocessing steps too, which makes it more accurate for automatic pulsar candidate selection. Experiments on two pulsar datasets verify the effectiveness and efficiency of our proposed method.
△ Less
Submitted 23 October, 2019; v1 submitted 27 November, 2017;
originally announced November 2017.