-
First JVLA Radio Observation on PDS70
Authors:
Hauyu Baobab Liu,
Simon Casassus,
Ruobing Dong,
Kiyoaki Doi,
Jun Hashimoto,
Takayuki Muto
Abstract:
PDS~70 is a protoplanetary system that hosts two actively accreting gas giants, namely PDS~70b and PDS~70c. The system has a $\sim$60--100 au dusty ring that has been resolved by ALMA, along with circumplanetary disks around the two gas giants. Here we report the first JVLA Q (40--48 GHz), Ka (29--37 GHz), K (18--26 GHz), and X (8--12 GHz) bands continuum observations, and the complementary ALMA B…
▽ More
PDS~70 is a protoplanetary system that hosts two actively accreting gas giants, namely PDS~70b and PDS~70c. The system has a $\sim$60--100 au dusty ring that has been resolved by ALMA, along with circumplanetary disks around the two gas giants. Here we report the first JVLA Q (40--48 GHz), Ka (29--37 GHz), K (18--26 GHz), and X (8--12 GHz) bands continuum observations, and the complementary ALMA Bands 3 ($\sim$98 GHz) and 4 ($\sim$145 GHz) observations towards PDS~70. The dusty ring appears azimuthally asymmetric in our ALMA images. We obtained firm detections at Ka and K bands without spatially resolving the source; we obtained a marginal detection at Q band, and no detection at X band. The spectral indices ($α$) are 5$\pm$1 at 33--44 GHz and 0.6$\pm$0.2 at 22--33 GHz. At 10--22 GHz, the conservative lower limit of $α$ is 1.7. The 33--44 GHz flux density is likely dominated by the optically thin thermal emission of grown dust with $\gtrsim$1 mm maximum grain sizes, which may be associated with the azimuthally asymmetric substructure induced by planet-disk interaction. Since PDS~70 was not detected at X band, we found it hard to explain the low spectral index at 22--33 GHz only with free-free emission. Hence, we attribute the dominant emission at 22--33 GHz to the emission of spinning nanometer-sized dust particles, while free-free emission may partly contribute to emission at this frequency range. In some protoplanetary disks, the emission of spinning nanometer-sized dust particles may resemble the 20--50 GHz excess in the spectra of millimeter-sized dust. The finding of strong continuum emission of spinning nanometer-sized particles can complicate the procedure of constraining the properties of grown dust. Future high-resolution, multi-frequency JVLA/ngVLA and SKA observations may shed light on this issue.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Forming localized dust concentrations in a dust ring: DM Tau case study
Authors:
Hauyu Baobab Liu,
Takayuki Muto,
Mihoko Konishi,
Chia-Ying Chung,
Jun Hashimoto,
Kiyoaki Doi,
Ruobing Dong,
Tomoyuki Kudo,
Yasuhiro Hasegawa,
Yuka Terada,
Akimasa Kataoka
Abstract:
The previous, high angular resolution 225 GHz ($\sim$1.3 mm) continuum observations on the transitional disk DM Tau have resolved an outer ring at 20-120 au radii that is weakly azimuthally asymmetric. We aimed to examine dust growth and filtration in the outer ring. We performed the $\sim$0$''$.06 ($\sim$8.7 au) resolution Karl G. Jansky Very Large Array (JVLA) 40-48 GHz ($\sim$7 mm; Q band) cont…
▽ More
The previous, high angular resolution 225 GHz ($\sim$1.3 mm) continuum observations on the transitional disk DM Tau have resolved an outer ring at 20-120 au radii that is weakly azimuthally asymmetric. We aimed to examine dust growth and filtration in the outer ring. We performed the $\sim$0$''$.06 ($\sim$8.7 au) resolution Karl G. Jansky Very Large Array (JVLA) 40-48 GHz ($\sim$7 mm; Q band) continuum observations and the complementary observations at lower frequencies. In addition, we analyzed the archival JVLA observations that were taken since 2010. Intriguingly, the Q band image resolved the azimuthally highly asymmetric, knotty dust emission sources close to the inner edge of the outer ring. Fitting the 8-700 GHz spectral energy distribution (SED) with two dust components indicates that the maximum grain size in these knotty dust emission sources is likely $\gtrsim$300 $μ$m while it is $\lesssim$50 $μ$m in the rest of the ring. These results may be explained by trapping of inward migrating grown dust close to the ring inner edge. The exact mechanism for developing the azimuthal asymmetry has not yet been identified, which may be due to planet-disk interaction that might also be responsible for the creation of the dust cavity and pressure bump, or the fluid instabilities and vortex formation due to shear motions. Finally, we remark that the asymmetries in DM Tau are hard to diagnose from the $\gtrsim$225 GHz observations owing to a high optical depth at the ring. In other words, the apparent symmetric or asymmetric morphology of the transitional disks may be related to the optical depths of those disks at the observing frequency.
△ Less
Submitted 13 February, 2024; v1 submitted 5 February, 2024;
originally announced February 2024.
-
Constraints on the dust size distributions in the HD 163296 disk from the difference of the apparent dust ring widths between two ALMA Bands
Authors:
Kiyoaki Doi,
Akimasa Kataoka
Abstract:
The dust size in protoplanetary disks is a crucial parameter for understanding planet formation, while the observational constraints on dust size distribution have large uncertainties. In this study, we present a new method to constrain the dust size distribution from the dust spatial distribution, utilizing the fact that larger dust grains are more spatially localized. We analyze the ALMA Band 6…
▽ More
The dust size in protoplanetary disks is a crucial parameter for understanding planet formation, while the observational constraints on dust size distribution have large uncertainties. In this study, we present a new method to constrain the dust size distribution from the dust spatial distribution, utilizing the fact that larger dust grains are more spatially localized. We analyze the ALMA Band 6 (1.25 mm) and Band 4 (2.14 mm) high-resolution images and constrain the dust size distribution in the two rings of the HD 163296 disk. We find that the outer ring at 100 au appears narrower at the longer wavelengths, while the inner ring at 67 au appears to have similar widths across the two wavelengths. We model dust rings trapped at gas pressure maxima, where the dust grains follow a power-law size distribution, and the dust grains of a specific size follow a Gaussian spatial distribution with the width depending on the grain size. By comparing the observations with the models, we constrain the maximum dust size $a_{\mathrm{max}}$ and the exponent of the dust size distribution $p$. We constrain that $0.9 \ \mathrm{mm} < a_{\mathrm{max}} < 5 \ \mathrm{mm}$ and $p < 3.3$ in the inner ring, and $a_{\mathrm{max}} > 3 \times 10^1 \ \mathrm{mm}$ and $3.4 < p < 3.7$ in the outer ring. The larger maximum dust size in the outer ring implies a spatial dependency in dust growth, potentially influencing the formation location of the planetesimals. We further discuss the turbulence strength $α$ derived from the constrained dust spatial distribution, assuming equilibrium between turbulent diffusion and accumulation of dust grains.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
Estimate on dust scale height from ALMA dust continuum image of the HD 163296 protoplanetary disk
Authors:
Kiyoaki Doi,
Akimasa Kataoka
Abstract:
We aim at estimating the dust scale height of protoplanetary disks from millimeter continuum observations. First, we present a general expression of intensity of a ring in a protoplanetary disk, and show that we can constrain the dust scale height by the azimuthal intensity variation. Then, we apply the presented methodology to the two distinct rings at 68 au and at 100 au of the protoplanetary di…
▽ More
We aim at estimating the dust scale height of protoplanetary disks from millimeter continuum observations. First, we present a general expression of intensity of a ring in a protoplanetary disk, and show that we can constrain the dust scale height by the azimuthal intensity variation. Then, we apply the presented methodology to the two distinct rings at 68 au and at 100 au of the protoplanetary disk around HD 163296. We constrain the dust scale height by comparing the DSHARP high-resolution millimeter dust continuum image with radiative transfer simulations using RADMC-3D. We find that h_d/h_g > 0.84 at the inner ring and h_d/h_g < 0.11 at the outer ring with the 3 sigma uncertainties, where h_d is the dust scale height and h_g is the gas scale height. This indicates that the dust is flared at the inner ring and settled at the outer ring. We further constrain the ratio of turbulence parameter alpha to gas-to-dust-coupling parameter St from the derived dust scale height; alpha/St > 2.4 at the inner ring, and alpha/St < 1.1*10^{-2} at the outer ring. This result shows that the turbulence is stronger or the dust is smaller at the inner ring than at the outer ring.
△ Less
Submitted 5 March, 2021; v1 submitted 11 February, 2021;
originally announced February 2021.
-
An arm length stabilization system for KAGRA and future gravitational-wave detectors
Authors:
T. Akutsu,
M. Ando,
K. Arai,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
Y. Aso,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
H. Chu,
Y-K. Chu,
K. Doi,
S. Eguchi,
Y. Enomoto
, et al. (181 additional authors not shown)
Abstract:
Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, wh…
▽ More
Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.
△ Less
Submitted 28 November, 2019; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Application of the independent component analysis to the iKAGRA data
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
Y. Bae,
L. Baiotti,
R. Bajpai,
M. A. Barton,
K. Cannon,
E. Capocasa,
M. Chan,
C. Chen,
K. Chen,
Y. Chen,
H. Chu,
Y-K. Chu
, et al. (227 additional authors not shown)
Abstract:
We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform…
▽ More
We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.
△ Less
Submitted 1 June, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
L. Baiotti,
M. A. Barton,
K. Cannon,
E. Capocasa,
C-S. Chen,
T-W. Chiu,
K. Cho,
Y-K. Chu,
K. Craig,
W. Creus,
K. Doi,
K. Eda
, et al. (179 additional authors not shown)
Abstract:
KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic…
▽ More
KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors.
△ Less
Submitted 11 January, 2019;
originally announced January 2019.
-
KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector
Authors:
T. Akutsu,
M. Ando,
K. Arai,
Y. Arai,
S. Araki,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
S. Bae,
L. Baiotti,
M. A. Barton,
K. Cannon,
E. Capocasa,
C-S. Chen,
T-W. Chiu,
K. Cho,
Y-K. Chu,
K. Craig,
W. Creus,
K. Doi,
K. Eda,
Y. Enomoto
, et al. (169 additional authors not shown)
Abstract:
The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Tel…
▽ More
The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate.
△ Less
Submitted 20 November, 2018;
originally announced November 2018.
-
Construction of KAGRA: an Underground Gravitational Wave Observatory
Authors:
T. Akutsu,
M. Ando,
S. Araki,
A. Araya,
T. Arima,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
L. Baiotti,
M. A. Barton,
D. Chen,
K. Cho,
K. Craig,
R. DeSalvo,
K. Doi,
K. Eda,
Y. Enomoto,
R. Flaminio,
S. Fujibayashi,
Y. Fujii,
M. -K. Fujimoto,
M. Fukushima,
T. Furuhata
, et al. (202 additional authors not shown)
Abstract:
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferomet…
▽ More
Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.
△ Less
Submitted 11 December, 2017; v1 submitted 30 November, 2017;
originally announced December 2017.
-
The status of KAGRA underground cryogenic gravitational wave telescope
Authors:
KAGRA Collaboration,
T. Akutsu,
M. Ando,
A. Araya,
N. Aritomi,
H. Asada,
Y. Aso,
S. Atsuta,
K. Awai,
M. A. Barton,
K. Cannon,
K. Craig,
W. Creus,
K. Doi,
K. Eda,
Y. Enomoto,
R. Flaminio,
Y. Fujii,
M. -K. Fujimoto,
T. Furuhata,
S. Haino,
K. Hasegawa,
K. Hashino,
K. Hayama,
S. Hirobayashi
, et al. (126 additional authors not shown)
Abstract:
KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial ph…
▽ More
KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
Dissipation of magnetic fields in star-forming clouds with different metallicities
Authors:
Hajime Susa,
Kentaro Doi,
Kazuyuki Omukai
Abstract:
We study dissipation process of magnetic fields in the metallicity range $0-1 Z_{\odot}$ for contracting prestellar cloud cores. By solving non-equilibrium chemistry for important charged species including charged grains, we evaluate the drift velocity of the magnetic-field lines with respect to the gas. We find that the magnetic flux dissipates in the density range…
▽ More
We study dissipation process of magnetic fields in the metallicity range $0-1 Z_{\odot}$ for contracting prestellar cloud cores. By solving non-equilibrium chemistry for important charged species including charged grains, we evaluate the drift velocity of the magnetic-field lines with respect to the gas. We find that the magnetic flux dissipates in the density range $10^{12}{\rm cm^{-3}} \lesssim n_{\rm H} \lesssim 10^{17}{\rm cm^{-3}}$ for the solar-metallicity case at the scale of the core, which is assumed to be the Jeans scale. The dissipation density range becomes narrower for lower metallicity. The magnetic field is always frozen to the gas below metallicity $\lesssim 10^{-7}-10^{-6}Z_\odot$, depending on the ionization rate by cosmic rays and/or radioactivity. With the same metallicity, the dissipation density range becomes wider for lower ionization rate. The presence of such a dissipative regime is expected to cause various dynamical phenomena in protostellar evolution such as the suppression of jet/outflow launching and fragmentation of the circumstellar disks depending on the metallicity.
△ Less
Submitted 31 December, 2014;
originally announced January 2015.
-
The Formation of Population III Stars in Gas Accretion Stage: Effects of Magnetic Fields
Authors:
Masahiro N. Machida,
Kentaro Doi
Abstract:
The formation of Population III stars is investigated using resistive magnetohydrodynamic simulations. Starting from a magnetized primordial prestellar cloud, we calculate the cloud evolution several hundreds of years after first protostar formation, resolving the protostellar radius. When the natal minihalo field strength is weaker than B \lesssim 10^-13 (n/1 cm^-3)^-2/3 G (n is the hydrogen numb…
▽ More
The formation of Population III stars is investigated using resistive magnetohydrodynamic simulations. Starting from a magnetized primordial prestellar cloud, we calculate the cloud evolution several hundreds of years after first protostar formation, resolving the protostellar radius. When the natal minihalo field strength is weaker than B \lesssim 10^-13 (n/1 cm^-3)^-2/3 G (n is the hydrogen number density), magnetic effects can be ignored. In this case, fragmentation occurs frequently and a stellar cluster forms, in which stellar mergers and mass exchange between protostars contribute to the mass growth of these protostars. During the early gas accretion phase, the most massive protostar remains near the cloud centre, whereas some of the less massive protostars are ejected. The magnetic field significantly affects Population III star formation when B_amb \gtrsim 10^-12 (n/1 cm^-3)^-2/3 G. In this case, because the angular momentum around the protostar is effectively transferred by both magnetic braking and protostellar jets, the gas falls directly onto the protostar without forming a disk, and only a single massive star forms. In addition, a massive binary stellar system appears when B_amb \sim 10^-12 (n/1cm^-3)^-2/3 G. Therefore, the magnetic field determines the end result of the formation process (cluster, binary or single star) for Population III stars. Moreover, no persistent circumstellar disk appears around the protostar regardless of the magnetic field strength, which may influence the further evolution of Population III stars.
△ Less
Submitted 13 August, 2013;
originally announced August 2013.
-
Prospects for Observing and Localizing Gravitational-Wave Transients with Advanced LIGO, Advanced Virgo and KAGRA
Authors:
The LIGO Scientific Collaboration,
the Virgo Collaboration,
the KAGRA Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
S. Abraham,
F. Acernese,
K. Ackley,
C. Adams,
V. B. Adya,
C. Affeldt,
M. Agathos,
K. Agatsuma,
N. Aggarwal,
O. D. Aguiar,
L. Aiello,
A. Ain,
P. Ajith,
T. Akutsu,
G. Allen,
A. Allocca,
M. A. Aloy,
P. A. Altin,
A. Amato
, et al. (1297 additional authors not shown)
Abstract:
We present our current best estimate of the plausible observing scenarios for the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over the next several years, with the intention of providing information to facilitate planning for multi-messenger astronomy with gravitational waves. We estimate the sensitivity of the network to transient gravitational-wave signals for the third…
▽ More
We present our current best estimate of the plausible observing scenarios for the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over the next several years, with the intention of providing information to facilitate planning for multi-messenger astronomy with gravitational waves. We estimate the sensitivity of the network to transient gravitational-wave signals for the third (O3), fourth (O4) and fifth observing (O5) runs, including the planned upgrades of the Advanced LIGO and Advanced Virgo detectors. We study the capability of the network to determine the sky location of the source for gravitational-wave signals from the inspiral of binary systems of compact objects, that is BNS, NSBH, and BBH systems. The ability to localize the sources is given as a sky-area probability, luminosity distance, and comoving volume. The median sky localization area (90\% credible region) is expected to be a few hundreds of square degrees for all types of binary systems during O3 with the Advanced LIGO and Virgo (HLV) network. The median sky localization area will improve to a few tens of square degrees during O4 with the Advanced LIGO, Virgo, and KAGRA (HLVK) network. We evaluate sensitivity and localization expectations for unmodeled signal searches, including the search for intermediate mass black hole binary mergers.
△ Less
Submitted 24 November, 2020; v1 submitted 2 April, 2013;
originally announced April 2013.
-
Generation of Seed Magnetic Field around First Stars: the Biermann Battery Effect
Authors:
Kentaro Doi,
Hajime Susa
Abstract:
We investigate generation processes of magnetic fields around first stars. Since the first stars are expected to form anisotropic ionization fronts in the surrounding clumpy media, magnetic fields are generated by effects of radiation force as well as the Biermann battery effect. We have calculated the amplitude of magnetic field generated by the effects of radiation force around the first stars i…
▽ More
We investigate generation processes of magnetic fields around first stars. Since the first stars are expected to form anisotropic ionization fronts in the surrounding clumpy media, magnetic fields are generated by effects of radiation force as well as the Biermann battery effect. We have calculated the amplitude of magnetic field generated by the effects of radiation force around the first stars in the preceding paper, in which the Biermann battery effects are not taken into account.In this paper, we calculate the generation of magnetic fields by the Biermann battery effect as well as the effects of radiation force, utilizing the radiation hydrodynamics simulations. As a result, we find that the generated magnetic field strengths are ~ 10^{-19}G-10^{-17}G at ~ 100pc-1kpc scale mainly by the Biermann battery, which is an order of magnitude larger than the results of our previous study. We also find that this result is insensitive to various physical parameters including the mass of the source star, distance between the source and the dense clump, unless we take unlikely values of these parameters.
△ Less
Submitted 23 August, 2011;
originally announced August 2011.
-
Generation of Seed Magnetic Field around First Stars:Effects of Radiation Force
Authors:
Masashi Ando,
Kentaro Doi,
Hajime Susa
Abstract:
We investigate seed magnetic field generation in the early universe by radiation force of first stars. In the previous study with steady assumption, large amplitudes(10^{-15} G for first stars, 10^{-11}G for QSOs) are predicted. In this study, we formulate this issue in unsteady framework. Then, we consider a specific model of magnetic field generation around a very massive first star. Consequentl…
▽ More
We investigate seed magnetic field generation in the early universe by radiation force of first stars. In the previous study with steady assumption, large amplitudes(10^{-15} G for first stars, 10^{-11}G for QSOs) are predicted. In this study, we formulate this issue in unsteady framework. Then, we consider a specific model of magnetic field generation around a very massive first star. Consequently, 1) we find steady assumption is not valid in realistic situation, and 2) obtain much smaller magnetic field strength than predicted by Langer et al. (2003). In addition, we find momentum transfer process during photoionization is more important than Thomson scattering. The resultant magnetic flux density around the first star is < 10^{-19}G. These seed magnetic field will not affect subsequent star formation in the neighbor of first stars.
△ Less
Submitted 3 June, 2010; v1 submitted 6 May, 2010;
originally announced May 2010.
