-
Physical properties of asteroid Dimorphos as derived from the DART impact
Authors:
S. D. Raducan,
M. Jutzi,
A. F. Cheng,
Y. Zhang,
O. Barnouin,
G. S. Collins,
R. T. Daly,
T. M. Davison,
C. M. Ernst,
T. L. Farnham,
F. Ferrari,
M. Hirabayashi,
K. M. Kumamoto,
P. Michel,
N. Murdoch,
R. Nakano,
M. Pajola,
A. Rossi,
H. F. Agrusa,
B. W. Barbee,
M. Bruck Syal,
N. L. Chabot,
E. Dotto,
E. G. Fahnestock,
P. H. Hasselmann
, et al. (17 additional authors not shown)
Abstract:
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. O…
▽ More
On September 26, 2022, NASA's Double Asteroid Redirection Test (DART) mission successfully impacted Dimorphos, the natural satellite of the binary near-Earth asteroid (65803) Didymos. Numerical simulations of the impact provide a means to explore target surface material properties and structures, consistent with the observed momentum deflection efficiency, ejecta cone geometry, and ejected mass. Our simulation, which best matches observations, indicates that Dimorphos is weak, with a cohesive strength of less than a few pascals (Pa), similar to asteroids (162173) Ryugu and (101955) Bennu. We find that a bulk density of Dimorphos, rhoB, lower than 2400 kg/m3, and a low volume fraction of boulders (<40 vol%) on the surface and in the shallow subsurface, are consistent with measured data from the DART experiment. These findings suggest Dimorphos is a rubble pile that might have formed through rotational mass shedding and re-accumulation from Didymos. Our simulations indicate that the DART impact caused global deformation and resurfacing of Dimorphos. ESA's upcoming Hera mission may find a re-shaped asteroid, rather than a well-defined crater.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
The distribution of impactor core material during large impacts on Earth-like planets
Authors:
Jonathan P. Itcovitz,
Auriol S. P. Rae,
Thomas M. Davison,
Gareth S. Collins,
Oliver Shorttle
Abstract:
Large impacts onto young rocky planets may transform their compositions, creating highly reducing conditions at their surfaces and reintroducing highly siderophile metals to their mantles. Key to these processes is the availability of an impactor's chemically reduced core material (metallic iron). It is, therefore, important to constrain how much of an impactor's core remains accessible to a plane…
▽ More
Large impacts onto young rocky planets may transform their compositions, creating highly reducing conditions at their surfaces and reintroducing highly siderophile metals to their mantles. Key to these processes is the availability of an impactor's chemically reduced core material (metallic iron). It is, therefore, important to constrain how much of an impactor's core remains accessible to a planet's mantle/surface, how much is sequestered to its core, and how much escapes. Here, we present 3D simulations of such impact scenarios using the shock physics code iSALE to determine the fate of impactor iron. iSALE's inclusion of material strength is vital in capturing the behavior of both solid and fluid components of the planet and thus characterizing iron sequestration to the core. We find that the mass fractions of impactor core material that accretes to the planet core ($f_{core}$) or escapes ($f_{esc}$) can be readily parameterized as a function of a modified specific impact energy, with $f_{core} > f_{esc}$ for a wide set of impacts. These results differ from previous works that do not incorporate material strength. Our work shows that large impacts can place substantial reducing impactor core material in the mantles of young rocky planets. Impact-generated reducing atmospheres may thus be common for such worlds. However, through escape and sequestration to a planet's core, large fractions of an impactor's core can be geochemically hidden from a planet's mantle. Consequently, geochemical estimates of late bombardments of planets based on mantle siderophile element abundances may be underestimates.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
Authors:
Andrew F. Cheng,
Harrison F. Agrusa,
Brent W. Barbee,
Alex J. Meyer,
Tony L. Farnham,
Sabina D. Raducan,
Derek C. Richardson,
Elisabetta Dotto,
Angelo Zinzi,
Vincenzo Della Corte,
Thomas S. Statler,
Steven Chesley,
Shantanu P. Naidu,
Masatoshi Hirabayashi,
Jian-Yang Li,
Siegfried Eggl,
Olivier S. Barnouin,
Nancy L. Chabot,
Sidney Chocron,
Gareth S. Collins,
R. Terik Daly,
Thomas M. Davison,
Mallory E. DeCoster,
Carolyn M. Ernst,
Fabio Ferrari
, et al. (44 additional authors not shown)
Abstract:
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of…
▽ More
The NASA Double Asteroid Redirection Test (DART) mission performed a kinetic impact on asteroid Dimorphos, the satellite of the binary asteroid (65803) Didymos, at 23:14 UTC on September 26, 2022 as a planetary defense test. DART was the first hypervelocity impact experiment on an asteroid at size and velocity scales relevant to planetary defense, intended to validate kinetic impact as a means of asteroid deflection. Here we report the first determination of the momentum transferred to an asteroid by kinetic impact. Based on the change in the binary orbit period, we find an instantaneous reduction in Dimorphos's along-track orbital velocity component of 2.70 +/- 0.10 mm/s, indicating enhanced momentum transfer due to recoil from ejecta streams produced by the impact. For a Dimorphos bulk density range of 1,500 to 3,300 kg/m$^3$, we find that the expected value of the momentum enhancement factor, $β$, ranges between 2.2 and 4.9, depending on the mass of Dimorphos. If Dimorphos and Didymos are assumed to have equal densities of 2,400 kg/m$^3$, $β$= 3.61 +0.19/-0.25 (1 $σ$). These $β$ values indicate that significantly more momentum was transferred to Dimorphos from the escaping impact ejecta than was incident with DART. Therefore, the DART kinetic impact was highly effective in deflecting the asteroid Dimorphos.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Effects of impact and target parameters on the results of a kinetic impactor: predictions for the Double Asteroid Redirection Test (DART) mission
Authors:
Angela M. Stickle,
Mallory E. DeCoster,
Christoph Burger,
Wendy K. Caldwell,
Dawn Graninger,
Kathryn M. Kumamoto,
Robert Luther,
Jens Ormö,
Sabina Raducan,
Emma Rainey,
Christoph M. Schäfer,
James D. Walker,
Yun Zhang,
Patrick Michel,
J. Michael Owen,
Olivier Barnouin,
Andy F. Cheng,
Sidney Cochron,
Gareth S. Collins,
Thomas M. Davison,
Elisabetta Dotto,
Fabio Ferrari,
M. Isabel Herreros,
Stavro L. Ivanovski,
Martin Jutzi
, et al. (8 additional authors not shown)
Abstract:
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material pro…
▽ More
The Double Asteroid Redirection Test (DART) spacecraft will impact into the asteroid Dimorphos on September 26, 2022 as a test of the kinetic impactor technique for planetary defense. The efficiency of the deflection following a kinetic impactor can be represented using the momentum enhancement factor, Beta, which is dependent on factors such as impact geometry and the specific target material properties. Currently, very little is known about Dimorphos and its material properties that introduces uncertainty in the results of the deflection efficiency observables, including crater formation, ejecta distribution, and Beta. The DART Impact Modeling Working Group (IWG) is responsible for using impact simulations to better understand the results of the DART impact. Pre-impact simulation studies also provide considerable insight into how different properties and impact scenarios affect momentum enhancement following a kinetic impact. This insight provides a basis for predicting the effects of the DART impact and the first understanding of how to interpret results following the encounter. Following the DART impact, the knowledge gained from these studies will inform the initial simulations that will recreate the impact conditions, including providing estimates for potential material properties of Dimorphos and Beta resulting from DARTs impact. This paper summarizes, at a high level, what has been learned from the IWG simulations and experiments in preparation for the DART impact. While unknown, estimates for reasonable potential material properties of Dimorphos provide predictions for Beta of 1-5, depending on end-member cases in the strength regime.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Complex crater formation by oblique impacts on the Earth and Moon
Authors:
T. M. Davison,
G. S. Collins
Abstract:
Almost all meteorite impacts occur at oblique incidence angles, but the effect of impact angle on crater size is not well understood, especially for large craters. To improve oblique impact crater scaling, we present a suite of simulations of complex crater formation on Earth and the Moon over a range of impact angles, velocities and impactor sizes. We show that crater diameter is larger than pred…
▽ More
Almost all meteorite impacts occur at oblique incidence angles, but the effect of impact angle on crater size is not well understood, especially for large craters. To improve oblique impact crater scaling, we present a suite of simulations of complex crater formation on Earth and the Moon over a range of impact angles, velocities and impactor sizes. We show that crater diameter is larger than predicted by existing scaling relationships for oblique impacts and for impacts steeper than 45$^{\circ}$ shows little dependence on obliquity. Crater depth, volume and diameter depend on impact angle in different ways such that relatively shallower craters are formed by more oblique impacts. Our simulation results have implications for how crater populations are determined from impactor populations and vice-versa. Our results suggest that existing approaches to account for impact obliquity may underestimate the number of craters larger than a given size by as much as 40%.
△ Less
Submitted 8 September, 2022;
originally announced September 2022.
-
Effect of impact velocity and angle on deformational heating and post-impact temperature
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M. Davison,
Brandon C. Johnson
Abstract:
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material s…
▽ More
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material strength and explore the effects of impact angle and impact velocity. We find that oblique impacts with an impact angle that is steeper than 45 degree produce a similar amount of heated mass as vertical impacts. On the other hand, grazing impacts produce less heated mass and smaller heated regions compared to impacts at steeper angles. We derive an empirical formula of the heated mass, as a function of the impact angle and velocity. This formula can be used to estimate the impact conditions (velocity and angle) that had occurred and caused Ar loss in the meteoritic parent bodies. Furthermore, our results indicate that grazing impacts at higher impact velocities could generate a similar amount of heated material as vertical impacts at lower velocities. As the heated material produced by grazing impacts has experienced lower pressure than the material heated by vertical impacts, our results imply that grazing impacts may produce weakly shock-heated meteorites.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Influence of the projectile geometry on the momentum transfer from a kinetic impactor and implications for the DART mission
Authors:
S. D. Raducan,
M. Jutzi,
T. M. Davison,
M. E. DeCoster,
D. M. Graninger,
J. M. Owen,
A. M. Stickle,
G. S. Collins
Abstract:
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock ph…
▽ More
The DART spacecraft will impact Didymos's secondary, Dimorphos, at the end of 2022 and cause a change in the orbital period of the secondary. For simplicity, most previous numerical simulations of the impact used a spherical projectile geometry to model the DART spacecraft. To investigate the effects of alternative, simple projectile geometries on the DART impact outcome we used the iSALE shock physics code in two and thee-dimensions to model vertical impacts of projectiles with a mass and speed equivalent to the nominal DART impact, into porous basalt targets. We found that the simple projectile geometries investigated here have minimal effects on the crater morphology and momentum enhancement. Projectile geometries modelled in two-dimensions that have similar surface areas at the point of impact, affect the crater radius and the crater volume by less than 5%. In the case of a more extreme projectile geometry (i.e., a rod, modelled in three-dimensions), the crater was elliptical and 50% shallower compared to the crater produced by a spherical projectile of the same momentum. The momentum enhancement factor in these test cases, commonly referred to as beta, was within 7% for the 2D simulations and within 10% for the 3D simulations, of the value obtained for a uniform spherical projectile. The most prominent effects of projectile geometry are seen in the ejection velocity as a function of launch position and ejection angle of the fast ejecta that resides in the so-called `coupling zone'. These results will inform the LICIACube ejecta cone analysis.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Ejecta distribution and momentum transfer from oblique impacts on asteroid surfaces
Authors:
S. D. Raducan,
T. M. Davison,
G. S. Collins
Abstract:
NASA's Double Asteroid Redirection Test (DART) mission will impact its target asteroid, Dimorphos, at an oblique angle that will not be known prior to the impact. We computed iSALE-3D simulations of DART-like impacts on asteroid surfaces at different impact angles and found that the the vertical momentum transfer efficiency, $β$, is similar for different impact angles, however, the imparted moment…
▽ More
NASA's Double Asteroid Redirection Test (DART) mission will impact its target asteroid, Dimorphos, at an oblique angle that will not be known prior to the impact. We computed iSALE-3D simulations of DART-like impacts on asteroid surfaces at different impact angles and found that the the vertical momentum transfer efficiency, $β$, is similar for different impact angles, however, the imparted momentum is reduced as the impact angle decreases. It is expected that the momentum imparted from a 45$^\circ$ impact is reduced by up to 50\% compared to a vertical impact. The direction of the ejected momentum is not normal to the surface, however it is observed to `straighten up' with crater growth. iSALE-2D simulations of vertical impacts provide context for the iSALE-3D simulation results and show that the ejection angle varies with both target properties and with crater growth. While the ejection angle is relatively insensitive to the target porosity, it varies by up to 30$^\circ$ with target coefficient of internal friction. The simulation results presented in this paper can help constrain target properties from the DART crater ejecta cone, which will be imaged by the LICIACube. The results presented here represent the basis for an empirical scaling relationship for oblique impacts and can be used as a framework to determine an analytical approximation of the vertical component of the ejecta momentum, $β-1$, given known target properties.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Jetting during oblique impacts of spherical impactors
Authors:
Shigeru Wakita,
Brandon Johnson,
C. Adeene Denton,
Thomas M. Davison
Abstract:
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the t…
▽ More
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the target and impactor have the same composition (dunite), we examine the jetted material which exceeds the impact velocity. Our results show that oblique impacts always produce more jetted ejecta than vertical impacts, except for grazing impacts with impact angles $< 15^{\circ}$. A 45$^{\circ}$ impact with an impact velocity of 3 km/s produces jetted material equal to $\sim$ 7 \% of the impactor mass. This is 6 times the jetted mass produced by a vertical impact with similar impact conditions. We also find that the origin of jetted ejecta depends on impact angle; for impact angles less than 45$^{\circ}$, most of the jet is composed of impactor material, while at higher impact angles the jet is dominated by target material. Our findings are consistent with previous experimental work. In all cases, jetted materials are preferentially distributed downrange of the impactor.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Enhancement of impact heating in pressure-strengthened rocks in oblique impacts
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M Davison
Abstract:
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference i…
▽ More
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference in the peak pressure at the impact point at a given impact velocity, we find that the heated mass for an oblique impact is nearly the same as that for a head-on impact. Thus, our results differ from the previous finding that the heated mass decreases as the impact becomes more oblique, and show that the additional shear heating is more effective for oblique impacts than for head-on impacts. This also indicates that material ejected during oblique impact tends to experience lower shock pressures but higher temperatures.
△ Less
Submitted 1 December, 2019;
originally announced December 2019.
-
Mesoscale Modeling of Impact Compaction of Primitive Solar System Solids
Authors:
Thomas M Davison,
Gareth S Collins,
Philip A Bland
Abstract:
We have developed a method for simulating the mesoscale compaction of early solar system solids in low velocity impact events, using the iSALE shock physics code. Chondrules are represented by nonporous disks, placed within a porous matrix. By simulating impacts into bimodal mixtures over a wide range of parameter space (including the chondrule-to-matrix ratio, the matrix porosity and composition…
▽ More
We have developed a method for simulating the mesoscale compaction of early solar system solids in low velocity impact events, using the iSALE shock physics code. Chondrules are represented by nonporous disks, placed within a porous matrix. By simulating impacts into bimodal mixtures over a wide range of parameter space (including the chondrule-to-matrix ratio, the matrix porosity and composition and the impact velocity), we have shown how each of these parameters influences the shock processing of heterogeneous materials. The temperature after shock processing shows a strong dichotomy: matrix temperatures are elevated much higher than the chondrules, which remain largely cold. Chondrules can protect some matrix from shock compaction, with shadow regions in the lee side of chondrules exhibiting higher porosity that elsewhere in the matrix. Using the results from this mesoscale modelling, we show how the $\varepsilon-α$ porous compaction model parameters depend on initial bulk porosity. We also show that the timescale for the temperature dichotomy to equilibrate is highly dependent on the porosity of the matrix after the shock, and will be on the order of seconds for matrix porosities of less than 0.1, and on the order of 10's to 100's seconds for matrix porosities of $\sim$ 0.3--0.5. Finally, we have shown that the composition of the post-shock material is able to match the bulk porosity and chondrule-to-matrix ratios of meteorite groups such as carbonaceous chondrites and unequilibrated ordinary chondrites.
△ Less
Submitted 3 March, 2016; v1 submitted 1 March, 2016;
originally announced March 2016.
-
The early impact histories of meteorite parent bodies
Authors:
Thomas M Davison,
David P O'Brien,
Fred J Ciesla,
Gareth S Collins
Abstract:
We have developed a statistical framework that uses collisional evolution models, shock physics modeling and scaling laws to determine the range of plausible collisional histories for individual meteorite parent bodies. It is likely that those parent bodies that were not catastrophically disrupted sustained hundreds of impacts on their surfaces - compacting, heating, and mixing the outer layers; i…
▽ More
We have developed a statistical framework that uses collisional evolution models, shock physics modeling and scaling laws to determine the range of plausible collisional histories for individual meteorite parent bodies. It is likely that those parent bodies that were not catastrophically disrupted sustained hundreds of impacts on their surfaces - compacting, heating, and mixing the outer layers; it is highly unlikely that many parent bodies escaped without any impacts processing the outer few kilometers. The first 10 - 20 Myr were the most important time for impacts, both in terms of the number of impacts and the increase of specific internal energy due to impacts. The model has been applied to evaluate the proposed impact histories of several meteorite parent bodies: up to 10 parent bodies that were not disrupted in the first 100 Myr experienced a vaporizing collision of the type necessary to produce the metal inclusions and chondrules on the CB chondrite parent; around 1 - 5% of bodies that were catastrophically disrupted after 12 Myr sustained impacts at times that match the heating events recorded on the IAB/winonaite parent body; more than 75% of 100 km radius parent bodies which survived past 100 Myr without being disrupted sustained an impact that excavates to the depth required for mixing in the outer layers of the H chondrite parent body; and to protect the magnetic field on the CV chondrite parent body, the crust would have had to have been thick (~ 20 km) in order to prevent it being punctured by impacts.
△ Less
Submitted 10 September, 2013; v1 submitted 29 July, 2013;
originally announced July 2013.
-
Post-Impact Thermal Evolution of Porous Planetesimals
Authors:
T. M. Davison,
F. J. Ciesla,
G. S. Collins
Abstract:
Impacts between planetesimals have largely been ruled out as a heat source in the early Solar System, by calculations that show them to be an inefficient heat source and unlikely to cause global heating. However, the long-term, localized thermal effects of impacts on planetesimals have never been fully quantified. Here, we simulate a range of impact scenarios between planetesimals to determine the…
▽ More
Impacts between planetesimals have largely been ruled out as a heat source in the early Solar System, by calculations that show them to be an inefficient heat source and unlikely to cause global heating. However, the long-term, localized thermal effects of impacts on planetesimals have never been fully quantified. Here, we simulate a range of impact scenarios between planetesimals to determine the post-impact thermal histories of the parent bodies, and hence the importance of impact heating in the thermal evolution of planetesimals. We find on a local scale that heating material to petrologic type 6 is achievable for a range of impact velocities and initial porosities, and impact melting is possible in porous material at a velocity of > 4 km/s. Burial of heated impactor material beneath the impact crater is common, insulating that material and allowing the parent body to retain the heat for extended periods (~ millions of years). Cooling rates at 773 K are typically 1 - 1000 K/Ma, matching a wide range of measurements of metallographic cooling rates from chondritic materials. While the heating presented here is localized to the impact site, multiple impacts over the lifetime of a parent body are likely to have occurred. Moreover, as most meteorite samples are on the centimeter to meter scale, the localized effects of impact heating cannot be ignored.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
