-
Euclid. III. The NISP Instrument
Authors:
Euclid Collaboration,
K. Jahnke,
W. Gillard,
M. Schirmer,
A. Ealet,
T. Maciaszek,
E. Prieto,
R. Barbier,
C. Bonoli,
L. Corcione,
S. Dusini,
F. Grupp,
F. Hormuth,
S. Ligori,
L. Martin,
G. Morgante,
C. Padilla,
R. Toledo-Moreo,
M. Trifoglio,
L. Valenziano,
R. Bender,
F. J. Castander,
B. Garilli,
P. B. Lilje,
H. -W. Rix
, et al. (412 additional authors not shown)
Abstract:
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the proc…
▽ More
The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
The CCD Controller and Detector
Authors:
G. Bonano,
C. Bonoli,
F. Bortoletto,
P. Bruno,
M. Comari,
R. Cosentino,
M. D'Alessandro,
D. Fantinel,
E. Giro,
S. Scuderi
Abstract:
All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise.…
▽ More
All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise. Detectors characterization is of fundamental importance when they have to be used in scientific instrumentation. Various CCDs have been assembled in cryostats and tested at our laboratory in order to select the suitable detector for the optical instruments of the TNG. The relevant phases of the group activity are here described, as well as the commissioning at the telescope and the work that is in progress.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
The commissioning phase
Authors:
F. Bortoletto,
S. Benetti,
G. Bonanno,
C. Bonoli,
P. Bruno,
C. Carmona,
P. Conconi,
L. Corcione,
R. Cosentino,
M. D'Alessandro,
R. Dominguez,
D. Fantinel,
A. Galli,
D. Gardiol,
A. Ghedina,
F. Ghinassi,
E. Giro,
C. Gonzales,
NI. Gonzalez,
J. Guerra,
A. Magazzù,
D. Mancini,
E. Marchetti,
J. Medina,
F. Pasian
, et al. (12 additional authors not shown)
Abstract:
In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks…
▽ More
In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks, data-nets, power and controls) already mounted was started in the same period. Starting from June 1998 (telescope first-light date) the telescope went gradually in use, several nights per week, in order to test and tune the tracking and pointing system, the optics and the first derotator system (Nasmyth A station). At the end of the commissioning period and with the first scientific instruments mounted (April 1999) also the first routinely observations started. In this moment the telescope is doing astronomy 80% of time and the complete first-light instrumentation is mounted.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
CCDs for the instrumentation of the Telescopio Nazionale Galileo
Authors:
R. Cosentino,
G. Bonanno,
P. Bruno,
S. Scuderi,
C. Bonoli,
F. Bortoletto,
M. D'Alessandro,
D. Fantinel
Abstract:
Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental importance for their correct utilization in scientific instrumentation. We report on the measurement of the electro-optical characteristics of CCDs that will be used in…
▽ More
Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental importance for their correct utilization in scientific instrumentation. We report on the measurement of the electro-optical characteristics of CCDs that will be used in the scientific instrumentation at the Italian National Telescope. In particular we will show and compare the quantum eÆciency, the charge transfer eÆciency, the dark current, the read out noise the uniformity and the linearity of two sets of CCDs manufactured by EEV and LORAL. Finally, we will show the preliminary tests done at the telescope with the optical imager that has a mosaic of two EEV chips.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary
Authors:
T. Maciaszek,
A. Ealet,
W. Gillard,
K. Jahnke,
R. Barbier,
E. Prieto,
W. Bon,
A. Bonnefoi,
A. Caillat,
M. Carle,
A. Costille,
F. Ducret,
C. Fabron,
B. Foulon,
J. L. Gimenez,
E. Grassi,
M. Jaquet,
D. Le Mignant,
L. Martin,
T. Pamplona,
P. Sanchez,
J. C. Clémens,
L. Caillat,
M. Niclas,
A. Secroun
, et al. (73 additional authors not shown)
Abstract:
The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal…
▽ More
The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data.
This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
The BepiColombo SERENA/ELENA Instrument On-Ground Testing with the ELENA Special Check Out Equipment (SCOE)
Authors:
Francesco Lazzarotto,
Nello Vertolli,
Dario Maschietti,
Andrea Maria Di Lellis,
Jouni Ryno,
Fabio Camozzi,
Stefano Orsini,
Anna Milillo,
Alessandro Mura,
Elisabetta De Angelis,
Rosanna Rispoli,
Luca Colasanti,
Stefano Selci,
Marco D'Alessandro,
Roberto Leoni,
Francesco Mattioli
Abstract:
The neutral particles sensor ELENA (Emitted Low Energy Neutral Atoms) for the ESA/JAXA BepiColombo mission to Mercury (in the SERENA instrument suite) is devoted to measure low energetic neutral atoms. The main goal of the experiment is measuring the sputtering emission from planetary surfaces, from E=20eV up to E=5keV, within 1D (2 deg. x 76 deg. ). ELENA original project had also a particle disc…
▽ More
The neutral particles sensor ELENA (Emitted Low Energy Neutral Atoms) for the ESA/JAXA BepiColombo mission to Mercury (in the SERENA instrument suite) is devoted to measure low energetic neutral atoms. The main goal of the experiment is measuring the sputtering emission from planetary surfaces, from E=20eV up to E=5keV, within 1D (2 deg. x 76 deg. ). ELENA original project had also a particle discrimination system based on Time-of-Flight (TOF) of particles through the shutter on the Micro Channel Plates detector (MCP), it has been withdrawn from the flight model due to design and development problems. The ELENA SCOE is the configuration/testing system of ELENA, it allows to command operations and to set up configuration parameters on the instrument and to monitor the incoming data. The TC/TM simulation/encoding/decoding software is developed respecting the CCSDS/ECSS standards implemented by ESA, and it's SCOS2000 compatible. TC generation, HK data monitoring and basic science data analysis are operated by the SERENA EGSE, developed by the Finnish Meteorological Institute (FMI), Helsinki, Finland. The data stream outcoming from the EGSE is then preprocessed from TM to user readable formats: FITS and then ASCII csv tables with metadata collected in a detached XML file, called label. This task is performed using the PacketLib, ProcessorLib, and DISCoS (PPD) framework and is going to be used as the first level prototype of the BepiColombo Science Ground Segment processing pipeline, based in ESAC, Madrid, Spain and implemented using the PDS4 data format.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Aqueye+: a new ultrafast single photon counter for optical high time resolution astrophysics
Authors:
L. Zampieri,
G. Naletto,
C. Barbieri,
E. Verroi,
M. Barbieri,
G. Ceribella,
M. D'Alessandro,
G. Farisato,
A. Di Paola,
P. Zoccarato
Abstract:
Aqueye+ is a new ultrafast optical single photon counter, based on single photon avalanche photodiodes (SPAD) and a 4-fold split-pupil concept. It is a completely revisited version of its predecessor, Aqueye, successfully mounted at the 182 cm Copernicus telescope in Asiago. Here we will present the new technological features implemented on Aqueye+, namely a state of the art timing system, a dedic…
▽ More
Aqueye+ is a new ultrafast optical single photon counter, based on single photon avalanche photodiodes (SPAD) and a 4-fold split-pupil concept. It is a completely revisited version of its predecessor, Aqueye, successfully mounted at the 182 cm Copernicus telescope in Asiago. Here we will present the new technological features implemented on Aqueye+, namely a state of the art timing system, a dedicated and optimized optical train, a high sensitivity and high frame rate field camera and remote control, which will give Aqueye plus much superior performances with respect to its predecessor, unparalleled by any other existing fast photometer. The instrument will host also an optical vorticity module to achieve high performance astronomical coronography and a real time acquisition of atmospheric seeing unit. The present paper describes the instrument and its first performances.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
New approaches to the exploration: planet Mars and bacterial life
Authors:
Giuseppe Galletta,
Giulio Bertoloni,
Maurizio D'Alessandro
Abstract:
Planet Mars past environmental conditions were similar to the early Earth, but nowadays they are similar to those of a very cold desert, irradiated by intense solar UV light. However, some terrestrial lifeform showed the capability to adapt to very harsh environments, similar to the extreme condition of the Red Planet. In addition, recent discoveries of water in the Martian permafrost and of metha…
▽ More
Planet Mars past environmental conditions were similar to the early Earth, but nowadays they are similar to those of a very cold desert, irradiated by intense solar UV light. However, some terrestrial lifeform showed the capability to adapt to very harsh environments, similar to the extreme condition of the Red Planet. In addition, recent discoveries of water in the Martian permafrost and of methane in the Martian atmosphere, have generated optimism regarding a potentially active subsurface Mars' biosphere. These findings increase the possibility of finding traces of life on a planet like Mars. However, before landing on Mars with dedicated biological experiments, it is necessary to understand the possibilities of finding life in the present Martian conditions. Finding a lifeform able to survive in Martian environment conditions may have a double meaning: increasing the hope of discovering extraterrestrial life and defining the limits for a terrestrial contamination of planet Mars. In this paper we present the Martian environment simulators LISA and mini-LISA, operating at the Astronomical Observatory of Padua, Italy. They have been designed to simulate the conditions on the surface of planet Mars (atmospheric pressure,0.6-0.9 kPa; temperature from -120 to 20 °C, Martian-like atmospheric composition and UV radiation). In particular, we describe the mini-LISA simulator, that allows to perform experiments with no time limits, by weekly refueling the liquid nitrogen reservoir. Various kind of experiments may be performed in the simulators, from inorganic chemistry to biological activity. They are offered as experimental facilities to groups interested in studying the processes that happen on the Martian surface or under its dust cover.
△ Less
Submitted 22 February, 2011;
originally announced February 2011.
-
Autonomous Observations in Antarctica with AMICA
Authors:
Gianluca Di Rico,
Maurizio Ragni,
Mauro Dolci,
Oscar Straniero,
Angelo Valentini,
Gaetano Valentini,
Amico Di Cianno,
Croce Giuliani,
Demetrio Magrin,
Carlotta Bonoli,
Favio Bortoletto,
Maurizio D'Alessandro,
Leonardo Corcione,
Alberto Riva
Abstract:
The Antarctic Multiband Infrared Camera (AMICA) is a double channel camera operating in the 2-28 micron infrared domain (KLMNQ bands) that will allow to characterize and exploit the exceptional advantages for Astronomy, expected from Dome C in Antarctica. The development of the camera control system is at its final stage. After the investigation of appropriate solutions against the critical envi…
▽ More
The Antarctic Multiband Infrared Camera (AMICA) is a double channel camera operating in the 2-28 micron infrared domain (KLMNQ bands) that will allow to characterize and exploit the exceptional advantages for Astronomy, expected from Dome C in Antarctica. The development of the camera control system is at its final stage. After the investigation of appropriate solutions against the critical environment, a reliable instrumentation has been developed. It is currently being integrated and tested to ensure the correct execution of automatic operations. Once it will be mounted on the International Robotic Antarctic Infrared Telescope (IRAIT), AMICA and its equipment will contribute to the accomplishment of a fully autonomous observatory.
△ Less
Submitted 2 March, 2010;
originally announced March 2010.
-
Bacterial survival in Martian conditions
Authors:
Giuseppe Galletta,
Giulio Bertoloni,
Maurizio D'Alessandro
Abstract:
We shortly discuss the observable consequences of the two hypotheses about the origin of life on Earth and Mars: the Lithopanspermia (Mars to Earth or viceversa) and the origin from a unique progenitor, that for Earth is called LUCA (the LUCA hypothesis). To test the possibility that some lifeforms similar to the terrestrial ones may survive on Mars, we designed and built two simulators of Martian…
▽ More
We shortly discuss the observable consequences of the two hypotheses about the origin of life on Earth and Mars: the Lithopanspermia (Mars to Earth or viceversa) and the origin from a unique progenitor, that for Earth is called LUCA (the LUCA hypothesis). To test the possibility that some lifeforms similar to the terrestrial ones may survive on Mars, we designed and built two simulators of Martian environments where to perform experiments with different bacterial strains: LISA and mini-LISA. Our LISA environmental chambers can reproduce the conditions of many Martian locations near the surface trough changes of temperature, pressure, UV fluence and atmospheric composition. Both simulators are open to collaboration with other laboratories interested in performing experiments on many kind of samples (biological, minerals, electronic) in situations similar to that of the red planet. Inside LISA we have studied the survival of several bacterial strains and endospores. We verified that the UV light is the major responsible of cell death. Neither the low temperature, nor the pressure, nor the desiccation or the atmospheric changes were effective in this sense. We found that some Bacillus strains have a particular capability to survive for some hours in Martian conditions without being screened by dust or other shields. We also simulated the coverage happening on a planet by dust transported by the winds, blowing on the samples a very small quantity of volcanic ash grains or red iron oxide particles. Samples covered by these dust grains have shown a high percentage of survival, indicating that under the surface dust, if life were to be present on Mars in the past, some bacteria colonies or cells could still be present.
△ Less
Submitted 1 June, 2010; v1 submitted 22 February, 2010;
originally announced February 2010.
-
Surviving on Mars: test with LISA simulator
Authors:
G. Galletta,
M. D'Alessandro,
G. Bertoloni,
F. Castellani,
R. Visentin
Abstract:
We present the biological results of some experiments performed in the Padua simulators of planetary environments, named LISA, used to study the limit of bacterial life on the planet Mars. The survival of Bacillus strains for some hours in Martian environment is shortly discussed.
We present the biological results of some experiments performed in the Padua simulators of planetary environments, named LISA, used to study the limit of bacterial life on the planet Mars. The survival of Bacillus strains for some hours in Martian environment is shortly discussed.
△ Less
Submitted 26 October, 2009;
originally announced October 2009.
-
LISA: Mars and the limits of life
Authors:
G. Galletta,
M. D'Alessandro,
G. Bertoloni,
G. Fanti,
E. Dainese,
M. Pelizzo,
F. Ferri,
D. Pavarin,
C. Bettanini,
G. Bianchini,
S. Debei
Abstract:
We describe the results of the first tests made on LISA, a simulator of planetary environments designed and built in Padua, dedicated to the study of the limit of bacterial life on the planet Mars. Tests on the cryogenic circuit, on the UV illumination and on bacterial coltures at room temperature that shall be used as references are described.
We describe the results of the first tests made on LISA, a simulator of planetary environments designed and built in Padua, dedicated to the study of the limit of bacterial life on the planet Mars. Tests on the cryogenic circuit, on the UV illumination and on bacterial coltures at room temperature that shall be used as references are described.
△ Less
Submitted 5 June, 2007;
originally announced June 2007.
