-
On-sky demonstration at Palomar Observatory of the near-IR, high-resolution VIPA spectrometer
Authors:
Alexis Carlotti,
Alexis Bidot,
David Mouillet,
Jean-Jacques Correia,
Laurent Jocou,
Stéphane Curaba,
Alain Delboulbé,
Etienne Le Coarer,
Patrick Rabou,
Guillaume Bourdarot,
Thierry Forveille,
Xavier Bondils,
Gautam Vasisht,
Dimitri Mawet,
Rick S. Burruss,
Rebecca Oppenheimer,
René Doyon,
Etienne Artigau,
Philippe Vallée
Abstract:
A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been m…
▽ More
A near-IR high-resolution, R=80000 spectrometer has been developed at IPAG to directly characterize the atmosphere of exoplanets using adaptive optics (AO) assisted telescopes, and a single-mode fiber-injection unit. A first technical test with the 200' Hale telescope at Palomar Observatory occurred in March 2022 using the PALM3000 AO system offered by this telescope. Observations have also been made at the same time with the PARVI spectrometer so that a direct comparison can be made between the two instruments. This spectrometer uses a virtually imaged phased array (VIPA) instead of an echelle grating, resulting in a very compact optical layout that fits in a 0.25m3 cryostat. Using a quarter of an H2RG detector, the spectrometer analyses the middle part of the H-band, from 1.57 to 1.7 microns for 2 sources whose light is transferred from the telescope to the spectrometer using single-mode fibers. By design, the transmission of the spectrometer is expected to be 40-50%, which is 2-3 times higher than the transmission of current high-resolution spectrometers such as CRIRES+ and NIRSPEC. A damaged cross-disperser limited it to 21%, however. A replacement grating with a correct, twice as high efficiency has been procured after the on-sky demonstration. In addition to recalling the main specifications of the VIPA spectrometer, this paper presents the control software, the calibration process, and the reduction pipeline that have been developed for the instrument. It also presents the results of the on-sky technical test with the Hale telescope, as well as measurements of the effective resolution and transmission, along with a comparison of a spectrum of the sun obtained with the spectrometer with the BASS2000 reference spectrum. Planned modifications are also discussed. That includes the integration of a new dedicated H2RG detector, and of K-band optics.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
AMICal Sat: A sparse RGB imager on board a 2U cubesat to study the aurora
Authors:
Mathieu Barthelemy,
Elisa Robert,
Vladimir Kalegaev,
Vincent Grennerat,
Thierry Sequies,
Guillaume Bourdarot,
Etienne Le Coarer,
Jean-Jacques Correia,
Patrick Rabou
Abstract:
AMICal sat, a dedicated 2U cubesat, has been developed, in order to monitor the auroral emissions, with a dedicated imager. It aims to help to reconstruct the low energy electrons fluxes up to 30 keV in Earth auroral regions. It includes an imager entirely designed in Grenoble University Space Center. The imager uses a 1.3 Mpixels sparse RGB CMOS detector and a wide field objective (f=22.5 mm). Th…
▽ More
AMICal sat, a dedicated 2U cubesat, has been developed, in order to monitor the auroral emissions, with a dedicated imager. It aims to help to reconstruct the low energy electrons fluxes up to 30 keV in Earth auroral regions. It includes an imager entirely designed in Grenoble University Space Center. The imager uses a 1.3 Mpixels sparse RGB CMOS detector and a wide field objective (f=22.5 mm). The satellite platform has been built by the polish company Satrevolution. Launched September, 3rd, 2020 from Kuru (French Guyana) on board the Vega flight 16, it produces its first images in October 2020. The aim of this paper is to describe the design of the payload especially the optics and the proximity electronics, to describe the use of the payload for space weather purpose. A preliminary analysis of a first image showing the relevance of such an instrument for auroral monitoring is performed. This analysis allowed to reconstruct from one of the first images the local electron input flux at the top of the atmosphere during the exposure time.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Experimental test of a 40 cm-long R=100 000 spectrometer for exoplanet characterisation
Authors:
Guillaume Bourdarot,
Etienne Le Coarer,
David Mouillet,
Jean-Jacques Correia,
Laurent Jocou,
Patrick Rabou,
Alexis Carlotti,
Xavier Bonfils,
Etienne Artigau,
Philippe Vallee,
Rene Doyon,
Thierry Forveille,
Eric Stadler,
Yves Magnard,
Arthur Vigan
Abstract:
High-resolution spectroscopy is a key element for present and future astronomical instrumentation. In particular, coupled to high contrast imagers and coronagraphs, high spectral resolution enables higher contrast and has been identified as a very powerful combination to characterise exoplanets, starting from giant planets now, up to Earth-like planet eventually for the future instruments. In this…
▽ More
High-resolution spectroscopy is a key element for present and future astronomical instrumentation. In particular, coupled to high contrast imagers and coronagraphs, high spectral resolution enables higher contrast and has been identified as a very powerful combination to characterise exoplanets, starting from giant planets now, up to Earth-like planet eventually for the future instruments. In this context, we propose the implementation of an innovative echelle spectrometer based on the use of VIPA (Virtually Imaged Phased Array, Shirasaki 1996). The VIPA itself is a particular kind of Fabry-Perot interferometer, used as an angular disperser with much greater dispersive power than common diffraction grating. The VIPA is an efficient, small component (3 cm x 2.4 cm), that takes the very advantage of single mode injection in a versatile design. The overall instrument presented here is a proof-of-concept of a compact, high-resolution (R > 80 000) spectrometer, dedicated to the H and K bands, in the context of the project High-Dispersion Coronagrahy developed at IPAG. The optical bench has a foot-print of 40 cm x 26 cm ; it is fed by two Single-Mode Fibers (SMF), one dedicated to the companion, and one to the star and/or to a calibration channel, and is cooled down to 80 K.
This communication first presents the scientific and instrumental context of the project, and the principal merit of single-mode operations in high-resolution spectrometry. After recalling the physical structure of the VIPA and its implementation in an echelle-spectrometer design, it then details the optical design of the spectrometer. In conclusion, further steps (integration, calibration, coupling with adaptive optics) and possible optimization are briefly presented.
Keywords: Echelle Spectrometer, High Spectral Resolution, Exoplanets, High-Dispersion Coronography, Infrared, Adaptive Optics, SPHERE
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Spectrographs for astrophotonics
Authors:
N. Blind,
E. Le Coarer,
P. Kern,
S. Gousset
Abstract:
The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, is planned to begin operation in the next decade and promises new challenges in the development of instruments since the instrument size increases in proportion to the telescope diameter D, and the cost as D2 or faster. The growing field of astrophotonics (the use of photonic technologies in astronomy) could s…
▽ More
The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, is planned to begin operation in the next decade and promises new challenges in the development of instruments since the instrument size increases in proportion to the telescope diameter D, and the cost as D2 or faster. The growing field of astrophotonics (the use of photonic technologies in astronomy) could solve this problem by allowing mass production of fully integrated and robust instruments combining various optical functions, with the potential to reduce the size, complexity and cost of instruments. Astrophotonics allows for a broad range of new optical functions, with applications ranging from sky background filtering, high spatial and spectral resolution imaging and spectroscopy. In this paper, we want to provide astronomers with valuable keys to understand how photonics solutions can be implemented (or not) according to the foreseen applications. The paper introduces first key concepts linked to the characteristics of photonics technologies, placed in the framework of astronomy and spectroscopy. We then describe a series of merit criteria that help us determine the potential of a given micro-spectrograph technology for astronomy applications, and then take an inventory of the recent developments in integrated micro-spectrographs with potential for astronomy. We finally compare their performance, to finally draw a map of typical science requirements and pin the identified integrated technologies on it. We finally emphasize the necessary developments that must support micro-spectrograph in the coming years.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Astrophotonic micro-spectrographs in the era of ELTs
Authors:
N. Blind,
E. Le Coarer,
P. Kern,
J. Bland-Hawthorn
Abstract:
The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, will start opera- tion in the next decade and promises new challenges in the development of instruments. The growing field of astrophotonics (the use of photonic technologies in astronomy) can partly solve this problem by allowing mass production of fully integrated and robust instruments combining various opt…
▽ More
The next generation of Extremely Large Telescopes (ELT), with diameters up to 39 meters, will start opera- tion in the next decade and promises new challenges in the development of instruments. The growing field of astrophotonics (the use of photonic technologies in astronomy) can partly solve this problem by allowing mass production of fully integrated and robust instruments combining various optical functions, with the potential to reduce the size, complexity and cost of instruments. In this paper, we focus on developments in integrated micro-spectrographs and their potential for ELTs. We take an inventory of the identified technologies currently in development, and compare the performance of the different concepts. We show that in the current context of single-mode instruments, integrated spectrographs making use of, e.g., a photonic lantern can be a solution to reach the desired performance. However, in the longer term, there is a clear need to develop multimode devices to improve overall the throughput and sensitivity, while decreasing the instrument complexity.
△ Less
Submitted 6 August, 2014;
originally announced August 2014.
-
On-chip spectro-detection for fully integrated coherent beam combiners
Authors:
Pierre Kern,
Etienne Le Coärer,
Pierre Benech
Abstract:
This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection princip…
▽ More
This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection principle aimed at directly sampling and extracting the spectral information of an input signal together with its flux level measurement. The so-called SWIFTS demonstrated concept that stands for Stationary-Wave Integrated Fourier Transform Spectrometer, provides full spectral and spatial information recorded simultaneously thanks to a motionless detecting device.
Due to some newly available detection principles considered for the implementation of the SWIFTS concept, some technologies can even provide photo-counting operation that brought a significant extension of the interferometry domain of investigation in astrophysics . The proposed concept is applicable to most of the interferometric instrumental modes including fringe tracking, fast and sensitive detection, Fourier spectral reconstruction and also to manage a large number of incoming beams. The paper presents three practical implementations, two dealing with pair-wise integrated optics beam combinations and the third one with an all-in-one 8 beam combination. In all cases the principles turned into a pair wise baseline coding after proper data processing.
△ Less
Submitted 10 February, 2009;
originally announced February 2009.
-
System overview of the VLTI Spectro-Imager
Authors:
L. Jocou,
J. P. Berger,
F. Malbet,
P. Kern,
U. Beckmann,
D. Lorenzetti,
L. Corcione,
G. Li Causi,
D. Buscher,
J. Young,
M. Gai,
G. Weigelt,
G. Zins,
G. Duvert,
K. Perraut,
P. Labeye,
O. Absil,
P. Garcia,
D. Loreggia,
J. Lima,
J. Rebordao,
S. Ligori,
A. Amorim,
P. Rabou,
J. B. Le Bouquin
, et al. (8 additional authors not shown)
Abstract:
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolutio…
▽ More
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.
△ Less
Submitted 22 July, 2008;
originally announced July 2008.
-
VSI: the VLTI spectro-imager
Authors:
F. Malbet,
D. Buscher,
G. Weigelt,
P. Garcia,
M. Gai,
D. Lorenzetti,
J. Surdej,
J. Hron,
R. Neuhaeuser,
P. Kern,
L. Jocou,
J. -P. Berger,
O. Absil,
U. Beckmann,
L. Corcione,
G. Duvert,
M. Filho,
P. Labeye,
E. Le Coarer,
G. Li Causi,
J. Lima,
K. Perraut,
E. Tatulli,
E. Thiebaut,
J. Young
, et al. (29 additional authors not shown)
Abstract:
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combinat…
▽ More
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.
△ Less
Submitted 7 July, 2008;
originally announced July 2008.
-
Milli-arcsecond astrophysics with VSI, the VLTI spectro-imager in the ELT era
Authors:
F. Malbet,
D. Buscher,
G. Weigelt,
P. Garcia,
M. Gai,
D. Lorenzetti,
J. Surdej,
J. Hron,
R. Neuhäuser,
P. Kern,
L. Jocou,
J. -P. Berger,
O. Absil,
U. Beckmann,
L. Corcione,
G. Duvert,
M. Filho,
P. Labeye,
E. Le Coarer,
G. Li Causi,
J. Lima,
K. Perraut,
E. Tatulli,
E. Thiébaut,
J. Young
, et al. (27 additional authors not shown)
Abstract:
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and sp…
▽ More
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.
△ Less
Submitted 17 January, 2008;
originally announced January 2008.
-
Technology challenges for space interferometry: the option of mid-infrared integrated optics
Authors:
L. Labadie,
P. Kern,
P. Labeye,
E. Le Coarer,
C. Vigreux-Bercovici,
A. Pradel,
J. -E. Broquin,
V. Kirschner
Abstract:
Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these mis…
▽ More
Nulling interferometry is a technique providing high angular resolution which is the core of the space missions Darwin and the Terrestrail Planet Finder. The first objective is to reach a deep degree of starlight cancelation in the range 6 -- 20 microns, in order to observe and to characterize the signal from an Earth-like planet. Among the numerous technological challenges involved in these missions, the question of the beam combination and wavefront filtering has an important place. A single-mode integrated optics (IO) beam combiner could support both the functions of filtering and the interferometric combination, simplifying the instrumental design. Such a perspective has been explored in this work within the project Integrated Optics for Darwin (IODA), which aims at developing a first IO combiner in the mid-infrared. The solutions reviewed here to manufacture the combiner are based on infrared dielectric materials on one side, and on metallic conductive waveguides on the other side. With this work, additional inputs are offered to pursue the investigation on mid-infrared photonics devices.
△ Less
Submitted 11 July, 2007;
originally announced July 2007.
-
Mid-infrared laser light nulling experiment using single-mode conductive waveguides
Authors:
L. Labadie,
E. Le Coarer,
R. Maurand,
P. Labeye,
P. Kern,
B. Arezki,
J. -E. Broquin
Abstract:
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift u…
▽ More
Aims: In the context of space interferometry missions devoted to the search of exo-Earths, this paper investigates the capabilities of new single mode conductive waveguides at providing modal filtering in an infrared and monochromatic nulling experiment; Methods: A Michelson laser interferometer with a co-axial beam combination scheme at 10.6 microns is used. After introducing a Pi phase shift using a translating mirror, dynamic and static measurements of the nulling ratio are performed in the two cases where modal filtering is implemented and suppressed. No additional active control of the wavefront errors is involved. Results: We achieve on average a statistical nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null of 5.6e-5 is obtained in static mode. At the moment, the impact of external vibrations limits our ability to maintain the null to 10 to 20 seconds.; Conclusions: A positive effect of SM conductive waveguide on modal filtering has been observed in this study. Further improvement of the null should be possible with proper mechanical isolation of the setup.
△ Less
Submitted 1 May, 2007;
originally announced May 2007.
-
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
Authors:
F. Millour,
R. G. Petrov,
O. Chesneau,
D. Bonneau,
L. Dessart,
C. Bechet,
I. Tallon-Bosc,
M. Tallon,
E. Thiébaut,
F. Vakili,
F. Malbet,
D. Mourard,
G. Zins,
A. Roussel,
S. Robbe-Dubois,
P. Puget,
K. Perraut,
F. Lisi,
E. Le Coarer,
S. Lagarde,
P. Kern,
L. Glück,
G. Duvert,
A. Chelli,
Y. Bresson
, et al. (73 additional authors not shown)
Abstract:
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret thes…
▽ More
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.
△ Less
Submitted 31 October, 2006;
originally announced October 2006.
-
VSI: a milli-arcsec spectro-imager for the VLTI
Authors:
Fabien Malbet,
Pierre Kern,
Jean-Philippe Berger,
Laurent Jocou,
Paulo Garcia,
David Buscher,
Karine Rousselet-Perraut,
Gerd Weigelt,
Mario Gai,
Jean Surdej,
Josef Hron,
Ralph Neuhäuser,
Etienne Le Coarer,
Pierre Labeye,
Jean-Baptiste Le Bouquin,
Myriam Benisty,
Emilie Herwats
Abstract:
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to…
▽ More
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral resolution of: a) the close environments of young stars probing the initial conditions for planet formation; b) the surfaces of stars; c) the environment of evolved stars, stellar remnants and stellar winds, and d) the central region of active galactic nuclei and supermassive black holes. The science cases allowed us to specify the astrophysical requirements of the instrument and to define the necessary studies of the science group for phase A.
△ Less
Submitted 13 July, 2006;
originally announced July 2006.
-
VITRUV - Imaging close environments of stars and galaxies with the VLTI at milli-arcsec resolution
Authors:
Fabien Malbet,
Jean-Philippe Berger,
Paulo Garcia,
Pierre Kern,
Karine Perraut,
Myriam Benisty,
Laurent Jocou,
Emilie Herwats,
Jean-Baptiste Lebouquin,
Pierre Labeye,
Etienne Le Coarer,
Olivier Preis,
Eric Tatulli,
Eric Thiébaut
Abstract:
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide inter…
▽ More
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.
△ Less
Submitted 10 July, 2005;
originally announced July 2005.
-
The isolated interacting galaxy pair NGC 5426/27 (Arp 271)
Authors:
I. Fuentes-Carrera,
M. Rosado,
P. Amram,
D. Dultzin-Hacyan,
I. Cruz-Gonzalez,
H. Salo,
E. Laurikainen,
A. Bernal,
P. Ambrocio-Cruz,
E. Le Coarer
Abstract:
We present H alpha observations of the isolated interacting galaxy pair NGC 5426/27 using the scanning Fabry-Perot interferometer PUMA. The velocity field, various kinematical parameters and rotation curve for each galaxy were derived. The FWHM map and the residual velocities map were also computed to study the role of non-circular motions of the gas. Most of these motions can be associated with…
▽ More
We present H alpha observations of the isolated interacting galaxy pair NGC 5426/27 using the scanning Fabry-Perot interferometer PUMA. The velocity field, various kinematical parameters and rotation curve for each galaxy were derived. The FWHM map and the residual velocities map were also computed to study the role of non-circular motions of the gas. Most of these motions can be associated with the presence of spiral arms and structure such as central bars. We found a small bar-like structure in NGC 5426, a distorted velocity field for NGC 5427 and a bridge-like feature between both galaxies which seems to be associated with NGC 5426. Using the observed rotation curves, a range of possible masses was computed for each galaxy. These were compared with the orbital mass of the pair derived from the relative motion of the participants. The rotation curve of each galaxy was also used to fit different mass distribution models considering the most common theoretical dark halo models. An analysis of the interaction process is presented and a possible 3D scenario for this encounter is also suggested.
△ Less
Submitted 19 December, 2003;
originally announced December 2003.
-
The GraF instrument for imaging spectroscopy with the adaptive optics
Authors:
A. Chalabaev,
E. le Coarer,
P. Rabou,
Y. Magnard,
P. Petmezakis,
D. Le Mignant
Abstract:
The GraF instrument using a Fabry-Perot interferometer cross-dispersed with a grating was one of the first integral-field and long-slit spectrographs built for and used with an adaptive optics system. We describe its concept, design, optimal observational procedures and the measured performances. The instrument was used in 1997-2001 at the ESO 3.6 m telescope equipped with ADONIS adaptive optics…
▽ More
The GraF instrument using a Fabry-Perot interferometer cross-dispersed with a grating was one of the first integral-field and long-slit spectrographs built for and used with an adaptive optics system. We describe its concept, design, optimal observational procedures and the measured performances. The instrument was used in 1997-2001 at the ESO 3.6 m telescope equipped with ADONIS adaptive optics and SHARPII+ camera. The operating spectral range was 1.2 - 2.5 microns. We used the spectral resolution from 500 to 10 000 combined with the angular resolution of 0.1" - 0.2". The quality of GraF data is illustrated by the integral field spectroscopy of the complex 0.9" x 0.9" central region of Eta Car in the 1.7 microns spectral range at the limit of spectral and angular resolutions.
△ Less
Submitted 25 November, 2003;
originally announced November 2003.
-
Fabry-Perot Kinematics of HH 202, 203-204 in the Orion Nebula: Are they part of a Big Bipolar Outflow?
Authors:
Margarita Rosado,
Eduardo de la Fuente,
Lorena Arias,
E. Le Coarer
Abstract:
We present a kinematic study of the Herbig-Haro objects HH 202, 203 and 204 using Halpha and [NII] Fabry-Perot velocity maps. For HH 202 we find new features that could belong to this HH object or that perhaps are associated with an outflow different from HH 202. Because of its high velocity (up to 100 km/seg) this outflow probably can be a HH flow not catalogued previously. Large internal motio…
▽ More
We present a kinematic study of the Herbig-Haro objects HH 202, 203 and 204 using Halpha and [NII] Fabry-Perot velocity maps. For HH 202 we find new features that could belong to this HH object or that perhaps are associated with an outflow different from HH 202. Because of its high velocity (up to 100 km/seg) this outflow probably can be a HH flow not catalogued previously. Large internal motions are found in the fainter regions of HH 203-204, as well as evidence of transverse density gradients. We show that the apex of HH 204 is the zone of maximum velocity in agreement with bow shock models. From our studies, we find kinematic evidence that suggests that HH 203-204 and HH 202 are part of a single and large (approx 0.55 pc) HH flow.
△ Less
Submitted 23 July, 2001;
originally announced July 2001.
-
Kinematics of Herbig-Haro Objects and Jets in the Orion Nebula
Authors:
Margarita Rosado,
Eduardo de la Fuente,
Lorena Arias,
Alejandro Raga,
Ettiane Le Coarer
Abstract:
We have surveyed the inner 5' of the Orion Nebula by means of Halpha and [NII] Fabry-Perot imaging spectroscopy to present a kinematical study of the Herbig-Haro objects in the nebula. The objects studied in this work are HH 202, 203, 204, 529, 269 and other associated features. For HH 202 we find new features that, because of their high velocities (up to 100 km/seg) indicate the presence of an…
▽ More
We have surveyed the inner 5' of the Orion Nebula by means of Halpha and [NII] Fabry-Perot imaging spectroscopy to present a kinematical study of the Herbig-Haro objects in the nebula. The objects studied in this work are HH 202, 203, 204, 529, 269 and other associated features. For HH 202 we find new features that, because of their high velocities (up to 100 km/seg) indicate the presence of an outflow that probably is a HH flow not catalogued previously. HH 202 could be only a part of this larger outflow. Large internal motions are found in the fainter regions of HH 203-204, as well as evidence of transverse density gradients that could account for the asymmetry in the brightness distribution of HH 204. We report for the first time a high blueshifted velocity (-118 km/seg) associated with HH 204, and show that the apex of HH 204 is indeed the zone of maximum velocity, in agreement with bow shock models. We also studied the radial velocity field of HH 269 finding features associated with the HH object. From our studies, we find kinematic evidence that suggests that HH 203-204 and HH 202 are part of a big (aprox. 0.55 pc) bipolar HH outflow.
△ Less
Submitted 13 July, 2001;
originally announced July 2001.
-
An Interferometric Study of the Blue Compact Dwarf Galaxy IZW18
Authors:
A. R. Petrosian,
J. Boulesteix,
G. Comte,
D. Kunth,
E. Le Coarer
Abstract:
We present high spatial resolution observations of the blue compact dwarf galaxy IZW18 performed in the Halpha line with a scanning Fabry-Perot interferometer at the CFH telescope. Morphological structure of the galaxy in Halpha and in the red continuum is investigated. We also analyse the velocity field of the ionized gas. Besides the two compact HII components of the main body we find a popula…
▽ More
We present high spatial resolution observations of the blue compact dwarf galaxy IZW18 performed in the Halpha line with a scanning Fabry-Perot interferometer at the CFH telescope. Morphological structure of the galaxy in Halpha and in the red continuum is investigated. We also analyse the velocity field of the ionized gas. Besides the two compact HII components of the main body we find a population of small HII regions in its surroundings whose diameter distribution and Halpha luminosity function are consistent with those observed in dwarf Irregular galaxies. In the main body of the galaxy besides of the NW and SE red continuum peaks which are displaced with respect to the Halpha maxima, three new red condensations have been discovered. They have no clear Halpha counterparts. The velocity field in IZW18 shows peculiar motions superimposed on a quite regular background implying solid-body rotation with a gradient of about 70km/sec/ kpc. The Halpha line profiles exhibit an asymmetric structure, except for the NW main compact component. At least part of this asymmetry could result from accreted and/or expelled surrounding gas from the main star-forming core(s) of the galaxy. Contrary to previous suggestions that the south-west and north-east extensions of this galaxy are diffused emission produced by bipolar emitting gas we provide evidence that they are HII regions powered by star formation sites. The redshift of the Zwicky's "flare" has been measured for the first time and corresponds to the same velocity as IZW18. In such a context the optical ridge that appears to be an isolated morphological structure has a shape that may result from the gravitational interaction with the Zwicky's "flare" if this latter is a neighbour extreme dwarf object.
△ Less
Submitted 9 December, 1996;
originally announced December 1996.
