-
Particle monitoring capability of the Solar Orbiter Metis coronagraph through the increasing phase of solar cycle 25
Authors:
Catia Grimani,
Vincenzo Andretta,
Ester Antonucci,
Paolo Chioetto,
Vania Da Deppo,
Michele Fabi,
Samuel Gissot,
Giovanna Jerse,
Mauro Messerotti,
Giampiero Naletto,
Maurizio Pancrazzi,
Andrea Persici,
Christina Plainaki,
Marco Romoli,
Federico Sabbatini,
Daniele Spadaro,
Marco Stangalini,
Daniele Telloni,
Luca Teriaca,
Michela Uslenghi,
Mattia Villani,
Lucia Abbo,
Aleksandr Burtovoi,
Federica Frassati,
Federico Landini
, et al. (4 additional authors not shown)
Abstract:
Context. Galactic cosmic rays (GCRs) and solar particles with energies greater than tens of MeV penetrate spacecraft and instruments hosted aboard space missions. The Solar Orbiter Metis coronagraph is aimed at observing the solar corona in both visible (VL) and ultraviolet (UV) light. Particle tracks are observed in the Metis images of the corona. An algorithm has been implemented in the Metis pr…
▽ More
Context. Galactic cosmic rays (GCRs) and solar particles with energies greater than tens of MeV penetrate spacecraft and instruments hosted aboard space missions. The Solar Orbiter Metis coronagraph is aimed at observing the solar corona in both visible (VL) and ultraviolet (UV) light. Particle tracks are observed in the Metis images of the corona. An algorithm has been implemented in the Metis processing electronics to detect the VL image pixels crossed by cosmic rays. This algorithm was initially enabled for the VL instrument only, since the process of separating the particle tracks in the UV images has proven to be very challenging.
Aims. We study the impact of the overall bulk of particles of galactic and solar origin on the Metis coronagraph images. We discuss the effects of the increasing solar activity after the Solar Orbiter mission launch on the secondary particle production in the spacecraft.
Methods. We compared Monte Carlo simulations of GCRs crossing or interacting in the Metis VL CMOS sensor to observations gathered in 2020 and 2022. We also evaluated the impact of solar energetic particle events of different intensities on the Metis images.
Results. The study of the role of abundant and rare cosmic rays in firing pixels in the Metis VL images of the corona allows us to estimate the efficiency of the algorithm applied for cosmic-ray track removal from the images and to demonstrate that the instrument performance had remained unchanged during the first two years of the Solar Orbiter operations. The outcome of this work can be used to estimate the Solar Orbiter instrument's deep charging and the order of magnitude for energetic particles crossing the images of Metis and other instruments such as STIX and EUI.
△ Less
Submitted 24 July, 2023; v1 submitted 21 July, 2023;
originally announced July 2023.
-
Coronal Heating Rate in the Slow Solar Wind
Authors:
Daniele Telloni,
Marco Romoli,
Marco Velli,
Gary P. Zank,
Laxman Adhikari,
Cooper Downs,
Aleksandr Burtovoi,
Roberto Susino,
Daniele Spadaro,
Lingling Zhao,
Alessandro Liberatore,
Chen Shi,
Yara De Leo,
Lucia Abbo,
Federica Frassati,
Giovanna Jerse,
Federico Landini,
Gianalfredo Nicolini,
Maurizio Pancrazzi,
Giuliana Russano,
Clementina Sasso,
Vincenzo Andretta,
Vania Da Deppo,
Silvano Fineschi,
Catia Grimani
, et al. (37 additional authors not shown)
Abstract:
This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a mino…
▽ More
This Letter reports the first observational estimate of the heating rate in the slowly expanding solar corona. The analysis exploits the simultaneous remote and local observations of the same coronal plasma volume with the Solar Orbiter/Metis and the Parker Solar Probe instruments, respectively, and relies on the basic solar wind magnetohydrodynamic equations. As expected, energy losses are a minor fraction of the solar wind energy flux, since most of the energy dissipation that feeds the heating and acceleration of the coronal flow occurs much closer to the Sun than the heights probed in the present study, which range from 6.3 to 13.3 solar radii. The energy deposited to the supersonic wind is then used to explain the observed slight residual wind acceleration and to maintain the plasma in a non-adiabatic state. As derived in the Wentzel-Kramers-Brillouin limit, the present energy transfer rate estimates provide a lower limit, which can be very useful in refining the turbulence-based modeling of coronal heating and subsequent solar wind acceleration.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Optical and Opto-mechanical Analysis and Design of the Telescope for the Ariel Mission
Authors:
Paolo Chioetto
Abstract:
The Atmospheric Remote-sensing Infrared Exoplanet Large-survey (Ariel) is the first space mission dedicated to measuring the chemical composition and thermal structures of thousands of transiting exoplanets. Ariel was adopted in 2020 as the M4 mission in ESA "Cosmic Vision" program, with launch expected in 2029. The mission will operate from the Sun-Earth Lagrange Point L2. The scientific payload…
▽ More
The Atmospheric Remote-sensing Infrared Exoplanet Large-survey (Ariel) is the first space mission dedicated to measuring the chemical composition and thermal structures of thousands of transiting exoplanets. Ariel was adopted in 2020 as the M4 mission in ESA "Cosmic Vision" program, with launch expected in 2029. The mission will operate from the Sun-Earth Lagrange Point L2. The scientific payload consists of two instruments: a high resolution spectrometer in the waveband 1.95-7.8 microns, and a fine guidance system / visible photometer / low resolution near-infrared spectrometer. The instruments are fed a collimated beam from an unobscured, off-axis Cassegrain telescope. Instruments and telescope will operate at a temperature below 50 K. Telescope mirrors and supporting structures will be realized in aerospace-grade aluminum. Given the large aperture of the primary mirror (0.6 m$^2$), it is a choice of material that requires careful optical and opto-mechanical design, and technological advances in the three areas of mirror substrate thermal stabilization, optical surface polishing and optical coating. This thesis presents the work done by the author in these areas, as member of the team responsible for designing and manufacturing the telescope and mirrors, starting with a systematic review of the optical and opto-mechanical requirements and design choices of the Ariel telescope, in the context of previous development work and scientific goals and requirements of the mission. The review then progresses with opto-mechanical design, examining the most important choices in terms of structural and thermal design, and with a statistical analysis of the deformations of the optical surface of the telescope mirrors and of their alignment in terms of rigid body motions. The details of the qualification work on thermal stabilization, polishing and coating are then presented.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Exploring the Solar Wind from its Source on the Corona into the Inner Heliosphere during the First Solar Orbiter - Parker Solar Probe Quadrature
Authors:
Daniele Telloni,
Vincenzo Andretta,
Ester Antonucci,
Alessandro Bemporad,
Giuseppe E. Capuano,
Silvano Fineschi,
Silvio Giordano,
Shadia Habbal,
Denise Perrone,
Rui F. Pinto,
Luca Sorriso-Valvo,
Daniele Spadaro,
Roberto Susino,
Lloyd D. Woodham,
Gary P. Zank,
Marco Romoli,
Stuart D. Bale,
Justin C. Kasper,
Frédéric Auchère,
Roberto Bruno,
Gerardo Capobianco,
Anthony W. Case,
Chiara Casini,
Marta Casti,
Paolo Chioetto
, et al. (46 additional authors not shown)
Abstract:
This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO ca…
▽ More
This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO can be tracked to PSP, orbiting at 0.1 au, thus allowing the local properties of the solar wind to be linked to the coronal source region from where it originated. Thanks to the close approach of PSP to the Sun and the simultaneous Metis observation of the solar corona, the flow-aligned magnetic field and the bulk kinetic energy flux density can be empirically inferred along the coronal current sheet with an unprecedented accuracy, allowing in particular estimation of the Alfvén radius at 8.7 solar radii during the time of this event. This is thus the very first study of the same solar wind plasma as it expands from the sub-Alfvénic solar corona to just above the Alfvén surface.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter
Authors:
C. Grimani,
V. Andretta,
P. Chioetto,
V. Da Deppo,
M. Fabi,
S. Gissot,
G. Naletto,
A. Persici,
C. Plainaki,
M. Romoli,
F. Sabbatini,
D. Spadaro,
M. Stangalini,
D. Telloni,
M. Uslenghi,
E. Antonucci,
A. Bemporad,
G. Capobianco,
G. Capuano,
M. Casti,
Y. De Leo,
S. Fineschi,
F. Frassati,
F. Frassetto,
P. Heinzel
, et al. (19 additional authors not shown)
Abstract:
The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks obs…
▽ More
The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.
△ Less
Submitted 11 June, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
Ariel: Enabling planetary science across light-years
Authors:
Giovanna Tinetti,
Paul Eccleston,
Carole Haswell,
Pierre-Olivier Lagage,
Jérémy Leconte,
Theresa Lüftinger,
Giusi Micela,
Michel Min,
Göran Pilbratt,
Ludovic Puig,
Mark Swain,
Leonardo Testi,
Diego Turrini,
Bart Vandenbussche,
Maria Rosa Zapatero Osorio,
Anna Aret,
Jean-Philippe Beaulieu,
Lars Buchhave,
Martin Ferus,
Matt Griffin,
Manuel Guedel,
Paul Hartogh,
Pedro Machado,
Giuseppe Malaguti,
Enric Pallé
, et al. (293 additional authors not shown)
Abstract:
Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths.…
▽ More
Ariel, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey, was adopted as the fourth medium-class mission in ESA's Cosmic Vision programme to be launched in 2029. During its 4-year mission, Ariel will study what exoplanets are made of, how they formed and how they evolve, by surveying a diverse sample of about 1000 extrasolar planets, simultaneously in visible and infrared wavelengths. It is the first mission dedicated to measuring the chemical composition and thermal structures of hundreds of transiting exoplanets, enabling planetary science far beyond the boundaries of the Solar System. The payload consists of an off-axis Cassegrain telescope (primary mirror 1100 mm x 730 mm ellipse) and two separate instruments (FGS and AIRS) covering simultaneously 0.5-7.8 micron spectral range. The satellite is best placed into an L2 orbit to maximise the thermal stability and the field of regard. The payload module is passively cooled via a series of V-Groove radiators; the detectors for the AIRS are the only items that require active cooling via an active Ne JT cooler. The Ariel payload is developed by a consortium of more than 50 institutes from 16 ESA countries, which include the UK, France, Italy, Belgium, Poland, Spain, Austria, Denmark, Ireland, Portugal, Czech Republic, Hungary, the Netherlands, Sweden, Norway, Estonia, and a NASA contribution.
△ Less
Submitted 10 April, 2021;
originally announced April 2021.
