-
Receiver design for the REACH global 21-cm signal experiment
Authors:
Nima Razavi-Ghods,
Ian L. V. Roque,
Steven H. Carey,
John A. Ely,
Will Handley,
Alessio Magro,
Riccardo Chiello,
Tian Huang,
P. Alexander,
D. Anstey,
G. Bernardi,
H. T. J. Bevins,
J. Cavillot,
W. Croukamp,
J. Cumner,
E. de Lera Acedo,
D. I. L. de Villiers,
A. Fialkov,
T. Gessey-Jones,
Q. Gueuning,
A. T. Josaitis,
G. Kulkarni,
S. A. K. Leeney,
R. Maiolino,
P. D. Meerburg
, et al. (13 additional authors not shown)
Abstract:
We detail the the REACH radiometric system designed to enable measurements of the 21-cm neutral hydrogen line. Included is the radiometer architecture and end-to-end system simulations as well as a discussion of the challenges intrinsic to highly-calibratable system development. Following this, we share laboratory results based on the calculation of noise wave parameters utilising an over-constrai…
▽ More
We detail the the REACH radiometric system designed to enable measurements of the 21-cm neutral hydrogen line. Included is the radiometer architecture and end-to-end system simulations as well as a discussion of the challenges intrinsic to highly-calibratable system development. Following this, we share laboratory results based on the calculation of noise wave parameters utilising an over-constrained least squares approach demonstrating a calibration RMSE of 80 mK for five hours of integration on a custom-made source with comparable impedance to that of the antenna used in the field. This paper therefore documents the state of the calibrator and data analysis in December 2022 in Cambridge before shipping to South Africa.
△ Less
Submitted 14 July, 2023; v1 submitted 30 June, 2023;
originally announced July 2023.
-
The REACH radiometer for detecting the 21-cm hydrogen signal from redshift 7.5 to 28
Authors:
E. de Lera Acedo,
D. I. L. de Villiers,
N. Razavi-Ghods,
W. Handley,
A. Fialkov,
A. Magro,
D. Anstey,
H. T. J. Bevins,
R. Chiello,
J. Cumner,
A. T. Josaitis,
I. L. V. Roque,
P. H. Sims,
K. H. Scheutwinkel,
P. Alexander,
G. Bernardi,
S. Carey,
J. Cavillot,
W. Croukamp,
J. A. Ely,
T. Gessey-Jones,
Q. Gueuning,
R. Hills,
G. Kulkarni,
R. Maiolino
, et al. (9 additional authors not shown)
Abstract:
Observations of the 21-cm line from primordial hydrogen promise to be one of the best tools to study the early epochs of the Universe: the Dark Ages, the Cosmic Dawn, and the subsequent Epoch of Reionization. In 2018, the EDGES experiment caught the attention of the cosmology community with a potential detection of an absorption feature in the sky-averaged radio spectrum centred at 78 MHz. The fea…
▽ More
Observations of the 21-cm line from primordial hydrogen promise to be one of the best tools to study the early epochs of the Universe: the Dark Ages, the Cosmic Dawn, and the subsequent Epoch of Reionization. In 2018, the EDGES experiment caught the attention of the cosmology community with a potential detection of an absorption feature in the sky-averaged radio spectrum centred at 78 MHz. The feature is deeper than expected, and, if confirmed, would call for new physics. However, different groups have re-analyzed the EDGES data and questioned the reliability of the signal. The Radio Experiment for the Analysis of Cosmic Hydrogen (REACH) is a sky-averaged 21-cm experiment aiming at improving the current observations by tackling the issues faced by current instruments related to residual systematic signals in the data. The novel experimental approach focuses on detecting and jointly explaining these systematics together with the foregrounds and the cosmological signal using Bayesian statistics. To achieve this, REACH features simultaneous observations with two different antennas, an ultra wideband system (redshift range 7.5 to 28), and a receiver calibrator based on in-field measurements. Simulated observations forecast percent-level constraints on astrophysical parameters, potentially opening up a new window to the infant Universe.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
Spectral analysis of 22 radio pulsars using SKA-Low precursor stations
Authors:
C. P. Lee,
N. D. R. Bhat,
M. Sokolowski,
N. A. Swainston,
D. Ung,
A. Magro,
R. Chiello
Abstract:
We present the first observational study of pulsars performed with the second-generation precursor stations to the low-frequency component of the Square Kilometre Array (SKA-Low): the Aperture Array Verification System 2 (AAVS2) and the Engineering Development Array 2 (EDA2). Using the SKA-Low stations, we have observed 100 southern-sky pulsars between 70-350 MHz, including follow-up observations…
▽ More
We present the first observational study of pulsars performed with the second-generation precursor stations to the low-frequency component of the Square Kilometre Array (SKA-Low): the Aperture Array Verification System 2 (AAVS2) and the Engineering Development Array 2 (EDA2). Using the SKA-Low stations, we have observed 100 southern-sky pulsars between 70-350 MHz, including follow-up observations at multiple frequencies for a selected sample of bright pulsars. These observations have yielded detections of 22 pulsars, including the lowest-frequency detections ever published for 6 pulsars, despite the modest sensitivity of initial system where the recording bandwidth is limited to ~1 MHz. By comparing simultaneous flux density measurements obtained with the SKA-Low stations and performing rigorous electromagnetic simulations, we verify the accuracy of the SKA-Low sensitivity simulation code presented in Sokolowski et al. (2022). Furthermore, we perform model fits to the radio spectra of the detected pulsars using the method developed by Jankowski et al. (2018), including 9 pulsars which were not fitted in the original work. We robustly classify the spectra into 5 morphological classes and find that all but one pulsar exhibit deviations from simple power-law behaviour. These findings suggest that pulsars with well-determined spectra are more likely to show spectral flattening or turn-over than average. Our work demonstrates how SKA-Low stations can be meaningfully used for scientifically useful measurements and analysis of pulsar radio spectra, which are important inputs for informing pulsar surveys and science planned with the SKA-Low.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
The Engineering Development Array 2: design, performance and lessons from an SKA-Low prototype station
Authors:
Randall Wayth,
Marcin Sokolowski,
Jess Broderick,
Steven J. Tingay,
Raunaq Bhushan,
Tom Booler,
Riccardo Chiello,
David B. Davidson,
David Emrich,
Budi Juswardy,
David Kenney,
Giulia Macario,
Alessio Magro,
Andrea Mattana,
David Minchin,
Jader Monari,
Andrew McPhail,
Federico Perini,
Giuseppe Pupillo,
Marco Schiaffino,
Ravi Subrahmanya,
Andre van Es,
Mia Walker,
Mark Waterson
Abstract:
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous…
▽ More
We present the Engineering Development Array 2, which is one of two instruments built as a second generation prototype station for the future Square Kilometre Array Low Frequency Array. The array is comprised of 256 dual-polarization dipole antennas that can work as a phased array or as a standalone interferometer. We describe the design of the array and the details of design changes from previous generation instruments, as well as the motivation for the changes. Using the array as an imaging interferometer, we measure the sensitivity of the array at five frequencies ranging from 70 to 320 MHz.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
The Aperture Array Verification System 1: System overview and early commissioning results
Authors:
P. Benthem,
R. Wayth,
E. de Lera Acedo,
K. Zarb Adami,
M. Alderighi,
C. Belli,
P. Bolli,
T. Booler,
J. Borg,
J. W. Broderick,
S. Chiarucci,
R. Chiello,
L. Ciani,
G. Comoretto,
B. Crosse,
D. Davidson,
A. DeMarco,
D. Emrich,
A. van Es,
D. Fierro,
A. Faulkner,
M. Gerbers,
N. Razavi-Ghods,
P. Hall,
L. Horsley
, et al. (29 additional authors not shown)
Abstract:
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verific…
▽ More
The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
Characterization of the SKA1-Low prototype station Aperture Array Verification System 2
Authors:
Giulia Macario,
Giuseppe Pupillo,
Gianni Bernardi,
Pietro Bolli,
Paola Di Ninni,
Giovanni Comoretto,
Andrea Mattana,
Jader Monari,
Federico Perini,
Marco Schiaffino,
Marcin Sokolowski,
Randall Wayth,
Jess Broderick,
Mark Waterson,
Maria Grazia Labate,
Riccardo Chiello,
Alessio Magro,
Tom Booler,
Raunaq Bhushan
Abstract:
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Ve…
▽ More
The low frequency component of the Square Kilometre Array (SKA1-Low) will be an aperture phased array located at the Murchison Radio-astronomy Observatory (MRO) site in Western Australia. It will be composed of 512 stations, each of them consisting of 256 log-periodic dual polarized antennas, and will operate in the low frequency range (50 MHz - 350 MHz) of the SKA bandwidth. The Aperture Array Verification System 2 (AAVS2), operational since late 2019, is the last full-size engineering prototype station deployed at the MRO site before the start of the SKA1-Low construction phase. The aim of this paper is to characterize the station performance through commissioning observations at six different frequencies (55, 70, 110, 160, 230 and 320 MHz) collected during its first year of activities. We describe the calibration procedure, present the resulting all-sky images and their analysis, and discuss the station calibratability and system stability. Using the difference imaging method, we also derive estimates of the SKA1-Low sensitivity for the same frequencies, and compare them to those obtained through electromagnetic simulations across the entire telescope bandwidth, finding good agreement (within $\leq 13%$). Moreover, our estimates exceed the SKA1-Low requirements at all the considered frequencies, by up to a factor of $\sim$2.3. Our results are very promising and allow an initial validation of the AAVS2 prototype station performance, which is an important step towards the upcoming SKA-Low telescope construction and science.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Digitizing MEXART -- System Overview and Verification
Authors:
Alessio Magro,
Josef Borg,
Riccardo Chiello,
Denis Cutajar,
Kristian Zarb Adami,
J. Americo González-Esparza,
Ernesto Andrade Mascote,
Ernesto Aguilar Rodríguez,
Julio Cesar Mejia Ambriz,
Pablo Villanueva
Abstract:
The Mexican Array Radio Telescope (MEXART), located in the state of Michoacan in Mexico, has been operating in an analog fashion, utilizing a Butler Matrix to generate fixed beams on the sky, since its inception. Calibrating this instrument has proved difficult, leading to loss in sensitivity. It was also a rigid setup, requiring manual intervention and tuning for different observation requirement…
▽ More
The Mexican Array Radio Telescope (MEXART), located in the state of Michoacan in Mexico, has been operating in an analog fashion, utilizing a Butler Matrix to generate fixed beams on the sky, since its inception. Calibrating this instrument has proved difficult, leading to loss in sensitivity. It was also a rigid setup, requiring manual intervention and tuning for different observation requirements. The RF system has now been replaced with a digital one. This digital backend is a hybrid system utilizing both FPGA-based technology and GPU acceleration, and is capable of automatically calibrating the different rows of the array, as well as generating a configurable number of frequency-domain synthesized beams to towards selected locations on the sky. A monitoring and control system, together with a full-featured web-based front-end, has also been developed, greatly simplifying the interaction with the instrument. This paper presents the design, implementation and deployment of the new digital backend, including preliminary analysis of system performance and stability.
△ Less
Submitted 28 September, 2021; v1 submitted 23 September, 2021;
originally announced September 2021.
-
Radio antenna design for sky-averaged 21 cm cosmology experiments: the REACH case
Authors:
J. Cumner,
E. De Lera Acedo,
D. I. L. de Villiers,
D. Anstey,
C. I. Kolitsidas,
B. Gurdon,
N. Fagnoni,
P. Alexander,
G. Bernardi,
H. T. J. Bevins,
S. Carey,
J. Cavillot,
R. Chiello,
C. Craeye,
W. Croukamp,
J. A. Ely,
A. Fialkov,
T. Gessey-Jones,
Q. Gueuning,
W. Handley,
R. Hills,
A. T. Josaitis,
G. Kulkarni,
A. Magro,
R. Maiolino
, et al. (13 additional authors not shown)
Abstract:
Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experim…
▽ More
Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experiment will seek to understand and compensate for systematic errors present using detailed modelling and characterization of the instrumentation. There is detailed the quantitative figures of merit and numerical modelling used to assist the design process of the REACH dipole antenna (one of the 2 antenna designs for REACH Phase I). This design process produced a 2.5:1 frequency bandwidth dipole. The aim of this design was to balance spectral smoothness and low impedance reflections with the ability to describe and understand the antenna response to the sky signal to inform the critically important calibration during observation and data analysis.
△ Less
Submitted 12 January, 2023; v1 submitted 21 September, 2021;
originally announced September 2021.
-
A Southern-Hemisphere all-sky radio transient monitor for SKA-Low prototype stations
Authors:
M. Sokolowski,
R. B. Wayth,
N. D. R. Bhat,
D. Price,
J. W. Broderick,
G. Bernardi,
P. Bolli,
R. Chiello,
G. Comoretto,
B. Crosse,
D. B. Davidson,
G. Macario,
A. Magro,
A. Mattana,
D. Minchin,
A. McPhail,
J. Monari,
F. Perini,
G. Pupillo,
G. Sleap,
S. Tingay,
D. Ung,
A. Williams
Abstract:
We present the first southern-hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array. Since its deployment the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It…
▽ More
We present the first southern-hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array. Since its deployment the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It uses a difference imaging technique, and has enabled identification of a wide variety of transient classes, ranging from human-made radio-frequency interference to genuine astrophysical events. Observations at the frequency 159.4 MHz and higher in a single coarse channel (0.926 MHz) were made with 2s time resolution, and multiple nights were analysed. Despite having modest sensitivity (~few Jy/beam), using a single coarse channel and 2-s imaging, the system detected bright transients from PSR B0950+08, proving that it can be used to detect bright transients of an astrophysical origin. The unusual, extreme activity of the pulsar PSR B0950+08 (up to ~155 Jy/beam) was initially detected in a "blind" search in the 2020-04-10/11 data and later assigned to this specific pulsar. The limitations of our data, however, prevent use from making firm conclusions of the effect being due to a combination of refractive and diffractive scintillation or intrinsic emission mechanisms. The system can routinely collect data over many days without interruptions; the large amount of recorded data at 159.4 and 229.7 MHz allowed us to determine a preliminary transient surface density upper limit of $1.32 \times 10^{-9} \text{deg}^{-2}$ for a timescale and limiting flux density of 2s and 42 Jy, respectively. We plan to extend the observing bandwidth to tens of MHz and improve time resolution to tens of milliseconds in order to increase the sensitivity and enable detections of Fast Radio Bursts below 300 MHz.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
The Northern Cross Fast Radio Burst project. I. Overview and pilot observations at 408 MHz
Authors:
Nicola T. Locatelli,
Gianni Bernardi,
Germano Bianchi,
Riccardo Chiello,
Alessio Magro,
Giovanni Naldi,
Maura Pilia,
Giuseppe Pupillo,
Alessandro Ridolfi,
Giancarlo Setti,
Franco Vazza
Abstract:
Fast radio bursts remain one of the most enigmatic astrophysical sources. Observations have significantly progressed over the last few years, thanks to the capabilities of new radio telescopes and the refurbishment of existing ones. Here we describe the upgrade of the Northern Cross radio telescope, operating in the 400-416~MHz frequency band, with the ultimate goal of turning the array into a ded…
▽ More
Fast radio bursts remain one of the most enigmatic astrophysical sources. Observations have significantly progressed over the last few years, thanks to the capabilities of new radio telescopes and the refurbishment of existing ones. Here we describe the upgrade of the Northern Cross radio telescope, operating in the 400-416~MHz frequency band, with the ultimate goal of turning the array into a dedicated instrument to survey the sky for fast radio bursts. We present test observations of the pulsar B0329+54 to characterize the system performance and forecast detectability. Observations with the system currently in place are still limited by modest sky coverage ($\sim 9.4$~deg$^2$) and biased by smearing of high dispersion measure events within each frequency channels. In its final, upgraded configuration, however, the telescope will be able to carry out unbiased fast radio burst surveys over a $\sim 350$~deg$^2$ instantaneous field of view up to $z \sim 5$, with a (nearly constant) $\sim 760 \, (τ/{\rm ms})^{-0.5}$~mJy rms sensitivity.
△ Less
Submitted 27 March, 2020; v1 submitted 9 March, 2020;
originally announced March 2020.
-
Signal Processing Firmware for the Low Frequency Aperture Array
Authors:
Gianni Comoretto,
Riccardo Chiello,
Matt Roberts,
Rob Halsall,
Kristian Zarb Adami,
Monica Alderighi,
Amin Aminaei,
Jeremy Baker,
Carolina Belli,
Simone Chiarucci,
Sergio D'Angelo,
Andrea De Marco,
Gabriele Dalle Mura,
Alessio Magro,
Andrea Mattana,
Jader Monari,
Giovanni Naldi,
Sandro Pastore,
Federico Perini,
Marco Poloni,
Giuseppe Pupillo,
Simone Rusticelli,
Marco Schiaffino,
Francesco Schillirò,
Emanuele Zaccaro
Abstract:
The signal processing firmware that has been developed for the Low Frequency Aperture Array component of the Square Kilometre Array is described. The firmware is implemented on a dual FPGA board, that is capable of processing the streams from 16 dual polarization antennas. Data processing includes channelization of the sampled data for each antenna, correction for instrumental response and for geo…
▽ More
The signal processing firmware that has been developed for the Low Frequency Aperture Array component of the Square Kilometre Array is described. The firmware is implemented on a dual FPGA board, that is capable of processing the streams from 16 dual polarization antennas. Data processing includes channelization of the sampled data for each antenna, correction for instrumental response and for geometric delays and formation of one or more beams by combining the aligned streams. The channelizer uses an oversampling polyphase filterbank architecture, allowing a frequency continuous processing of the input signal without discontinuities between spectral channels. Each board processes the streams from 16 antennas, as part of larger beamforming system, linked by standard Ethernet interconnections. There are envisaged to be 8192 of these signal processing platforms in the first phase of the Square Kilometre array so particular attention has been devoted to ensure the design is low cost and low power.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
