-
The Keck Cosmic Web Imager Integral Field Spectrograph
Authors:
Patrick Morrissey,
Matuesz Matuszewski,
D. Christopher Martin,
James D. Neill,
Harland Epps,
Jason Fucik,
Bob Weber,
Behnam Darvish,
Sean Adkins,
Steve Allen,
Randy Bartos,
Justin Belicki,
Jerry Cabak,
Shawn Callahan,
Dave Cowley,
Marty Crabill,
Willian Deich,
Alex Delecroix,
Greg Doppman,
David Hilyard,
Ean James,
Steve Kaye,
Michael Kokorowski,
Shui Kwok,
Kyle Lanclos
, et al. (14 additional authors not shown)
Abstract:
We report on the design and performance of the Keck Cosmic Web Imager (KCWI), a general purpose optical integral field spectrograph that has been installed at the Nasmyth port of the 10 m Keck II telescope on Mauna Kea, HI. The novel design provides blue-optimized seeing-limited imaging from 350-560 nm with configurable spectral resolution from 1000 - 20000 in a field of view up to 20"x33". Select…
▽ More
We report on the design and performance of the Keck Cosmic Web Imager (KCWI), a general purpose optical integral field spectrograph that has been installed at the Nasmyth port of the 10 m Keck II telescope on Mauna Kea, HI. The novel design provides blue-optimized seeing-limited imaging from 350-560 nm with configurable spectral resolution from 1000 - 20000 in a field of view up to 20"x33". Selectable volume phase holographic (VPH) gratings and high performance dielectric, multilayer silver and enhanced aluminum coatings provide end-to-end peak efficiency in excess of 45% while accommodating the future addition of a red channel that will extend wavelength coverage to 1 micron. KCWI takes full advantage of the excellent seeing and dark sky above Mauna Kea with an available nod-and-shuffle observing mode. The instrument is optimized for observations of faint, diffuse objects such as the intergalactic medium or cosmic web. In this paper, a detailed description of the instrument design is provided with measured performance results from the laboratory test program and ten nights of on-sky commissioning during the spring of 2017. The KCWI team is lead by Caltech and JPL (project management, design and implementation) in partnership with the University of California at Santa Cruz (camera optical and mechanical design) and the W. M. Keck Observatory (observatory interfaces).
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
Detailed Design of a Deployable Tertiary Mirror for the Keck I Telescope
Authors:
J. Xavier Prochaska,
Chris Ratliff,
Jerry Cabak,
Alex Tripsas,
Sean Adkins,
Michael Bolte,
David Cowley,
Mike Dahler,
Will Deich,
Hilton Lewis,
Jerry Nelson,
Sam Park,
Michael Peck,
Drew Phillips,
Mike Pollard,
Bill Randolph,
Dale Sanford,
Jim Ward,
Truman Wold
Abstract:
Motivated by the ever increasing pursuit of science with the transient sky (dubbed Time Domain Astronomy or TDA), we are fabricating and will commission a new deployable tertiary mirror for the Keck I telescope (K1DM3) at the W.M. Keck Observatory. This paper presents the detailed design of K1DM3 with emphasis on the opto-mechanics. This project has presented several design challenges. Foremost ar…
▽ More
Motivated by the ever increasing pursuit of science with the transient sky (dubbed Time Domain Astronomy or TDA), we are fabricating and will commission a new deployable tertiary mirror for the Keck I telescope (K1DM3) at the W.M. Keck Observatory. This paper presents the detailed design of K1DM3 with emphasis on the opto-mechanics. This project has presented several design challenges. Foremost are the competing requirements to avoid vignetting the light path when retracted against a sufficiently rigid system for high-precision and repeatable pointing. The design utilizes an actuated swing arm to retract the mirror or deploy it into a kinematic coupling. The K1DM3 project has also required the design and development of custom connections to provide power, communications, and compressed air to the system. This NSF-MRI funded project is planned to be commissioned in Spring 2017.
△ Less
Submitted 7 September, 2016;
originally announced September 2016.
-
Opto-Mechanical Design of ShaneAO: the Adaptive Optics System for the 3-meter Shane Telescope
Authors:
Christopher Ratliff,
Jerry Cabak,
Donald Gavel,
Renate Kupke,
Daren Dillon,
Elinor Gates,
William Deich,
Jim Ward,
David Cowley,
Terry Pfister,
Mike Saylor
Abstract:
A Cassegrain mounted adaptive optics instrument presents unique challenges for opto-mechanical design. The flexure and temperature tolerances for stability are tighter than those of seeing limited instruments. This criteria requires particular attention to material properties and mounting techniques. This paper addresses the mechanical designs developed to meet the optical functional requirements.…
▽ More
A Cassegrain mounted adaptive optics instrument presents unique challenges for opto-mechanical design. The flexure and temperature tolerances for stability are tighter than those of seeing limited instruments. This criteria requires particular attention to material properties and mounting techniques. This paper addresses the mechanical designs developed to meet the optical functional requirements. One of the key considerations was to have gravitational deformations, which vary with telescope orientation, stay within the optical error budget, or ensure that we can compensate with a steering mirror by maintaining predictable elastic behavior. Here we look at several cases where deformation is predicted with finite element analysis and Hertzian deformation analysis and also tested. Techniques used to address thermal deformation compensation without the use of low CTE materials will also be discussed.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
ShaneAO: wide science spectrum adaptive optics system for the Lick Observatory
Authors:
Donald Gavel,
Renate Kupke,
Daren Dillon,
Andrew Norton,
Chris Ratliff,
Jerry Cabak,
Andrew Phillips,
Connie Rockosi,
Rosalie McGurk,
Srikar Srinath,
Michael Peck,
William Deich,
Kyle Lanclos,
John Gates,
Michael Saylor,
Jim Ward,
Terry Pfister
Abstract:
A new high-order adaptive optics system is now being commissioned at the Lick Observatory Shane 3-meter telescope in California. This system uses a high return efficiency sodium beacon and a combination of low and high-order deformable mirrors to achieve diffraction-limited imaging over a wide spectrum of infrared science wavelengths covering 0.8 to 2.2 microns. We present the design performance g…
▽ More
A new high-order adaptive optics system is now being commissioned at the Lick Observatory Shane 3-meter telescope in California. This system uses a high return efficiency sodium beacon and a combination of low and high-order deformable mirrors to achieve diffraction-limited imaging over a wide spectrum of infrared science wavelengths covering 0.8 to 2.2 microns. We present the design performance goals and the first on-sky test results. We discuss several innovations that make this system a pathfinder for next generation AO systems. These include a unique woofer-tweeter control that provides full dynamic range correction from tip/tilt to 16 cycles, variable pupil sampling wavefront sensor, new enhanced silver coatings developed at UC Observatories that improve science and LGS throughput, and tight mechanical rigidity that enables a multi-hour diffraction- limited exposure in LGS mode for faint object spectroscopy science.
△ Less
Submitted 30 July, 2014;
originally announced July 2014.
-
APF - The Lick Observatory Automated Planet Finder
Authors:
Steven S. Vogt,
Matthew Radovan,
Robert Kibrick,
R. Paul Butler,
Barry Alcott,
Steve Allen,
Pamela Arriagada,
Mike Bolte,
Jennifer Burt,
Jerry Cabak,
Kostas Chloros,
David Cowley,
William Deich,
Brian Dupraw,
Wayne Earthman,
Harland Epps,
Sandra Faber,
Debra Fischer,
Elinor Gates,
David Hilyard,
Brad Holden,
Ken Johnston,
Sandy Keiser,
Dick Kanto,
Myra Katsuki
, et al. (23 additional authors not shown)
Abstract:
The Automated Planet Finder (APF) is a facility purpose-built for the discovery and characterization of extrasolar planets through high-cadence Doppler velocimetry of the reflex barycentric accelerations of their host stars. Located atop Mt. Hamilton, the APF facility consists of a 2.4-m telescope and its Levy spectrometer, an optical echelle spectrometer optimized for precision Doppler velocimetr…
▽ More
The Automated Planet Finder (APF) is a facility purpose-built for the discovery and characterization of extrasolar planets through high-cadence Doppler velocimetry of the reflex barycentric accelerations of their host stars. Located atop Mt. Hamilton, the APF facility consists of a 2.4-m telescope and its Levy spectrometer, an optical echelle spectrometer optimized for precision Doppler velocimetry. APF features a fixed format spectral range from 374 nm - 970 nm, and delivers a "Throughput" (resolution * slit width product) of 114,000 arc-seconds, with spectral resolutions up to 150,000. Overall system efficiency (fraction of photons incident on the primary mirror that are detected by the science CCD) on blaze at 560 nm in planet-hunting mode is 15%. First-light tests on the RV standard stars HD 185144 and HD 9407 demonstrate sub-meter per second precision (RMS per observation) held over a 3-month period. This paper reviews the basic features of the telescope, dome, and spectrometer, and gives a brief summary of first-light performance.
△ Less
Submitted 26 February, 2014;
originally announced February 2014.