-
Metadata and their importance in SO/PHI's on-board data processing
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
J. S. Castellanos Durán,
P. Gutierrez-Marques,
M. Kolleck
Abstract:
To cope with the telemetry limitations, the Polarimetric and Helioseismic Imager on Solar Orbiter does full on-board data processing. Metadata are central to the autonomous processing flow, crucial for providing science ready data sets to the community, as well as important in the blind debugging process that will occur in the commissioning phase. We designed a custom metadata logging system for S…
▽ More
To cope with the telemetry limitations, the Polarimetric and Helioseismic Imager on Solar Orbiter does full on-board data processing. Metadata are central to the autonomous processing flow, crucial for providing science ready data sets to the community, as well as important in the blind debugging process that will occur in the commissioning phase. We designed a custom metadata logging system for SO/PHI. This paper shows how the logged information is used in the blind debugging scenario.
△ Less
Submitted 17 December, 2019;
originally announced December 2019.
-
Performance analysis of the SO/PHI software framework for on-board data reduction
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
J. Blanco Rodríguez,
J. S. Castellanos Durán,
J. P. Cobos Carrascosa,
B. Fiethe,
A. Gandorfer,
Y. Guan,
M. Kolleck,
A. Lagg,
T. Lange,
H. Michalik,
S. K. Solanki,
J. C. del Toro Iniesta,
J. Woch
Abstract:
The Polarimetric and Helioseismic Imager (PHI) is the first deep-space solar spectropolarimeter, on-board the Solar Orbiter (SO) space mission. It faces: stringent requirements on science data accuracy, a dynamic environment, and severe limitations on telemetry volume. SO/PHI overcomes these restrictions through on-board instrument calibration and science data reduction, using dedicated firmware i…
▽ More
The Polarimetric and Helioseismic Imager (PHI) is the first deep-space solar spectropolarimeter, on-board the Solar Orbiter (SO) space mission. It faces: stringent requirements on science data accuracy, a dynamic environment, and severe limitations on telemetry volume. SO/PHI overcomes these restrictions through on-board instrument calibration and science data reduction, using dedicated firmware in FPGAs. This contribution analyses the accuracy of a data processing pipeline by comparing the results obtained with SO/PHI hardware to a reference from a ground computer. The results show that for the analysed pipeline the error introduced by the firmware implementation is well below the requirements of SO/PHI.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
The Polarimetric and Helioseismic Imager on Solar Orbiter
Authors:
S. K. Solanki,
J. C. del Toro Iniesta,
J. Woch,
A. Gandorfer,
J. Hirzberger,
A. Alvarez-Herrero,
T. Appourchaux,
V. Martínez Pillet,
I. Pérez-Grande,
E. Sanchis Kilders,
W. Schmidt,
J. M. Gómez Cama,
H. Michalik,
W. Deutsch,
G. Fernandez-Rico,
B. Grauf,
L. Gizon,
K. Heerlein,
M. Kolleck,
A. Lagg,
R. Meller,
R. Müller,
U. Schühle,
J. Staub,
K. Albert
, et al. (99 additional authors not shown)
Abstract:
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an impo…
▽ More
This paper describes the Polarimetric and Helioseismic Imager on the Solar Orbiter mission (SO/PHI), the first magnetograph and helioseismology instrument to observe the Sun from outside the Sun-Earth line. It is the key instrument meant to address the top-level science question: How does the solar dynamo work and drive connections between the Sun and the heliosphere? SO/PHI will also play an important role in answering the other top-level science questions of Solar Orbiter, as well as hosting the potential of a rich return in further science.
SO/PHI measures the Zeeman effect and the Doppler shift in the FeI 617.3nm spectral line. To this end, the instrument carries out narrow-band imaging spectro-polarimetry using a tunable LiNbO_3 Fabry-Perot etalon, while the polarisation modulation is done with liquid crystal variable retarders (LCVRs). The line and the nearby continuum are sampled at six wavelength points and the data are recorded by a 2kx2k CMOS detector. To save valuable telemetry, the raw data are reduced on board, including being inverted under the assumption of a Milne-Eddington atmosphere, although simpler reduction methods are also available on board. SO/PHI is composed of two telescopes; one, the Full Disc Telescope (FDT), covers the full solar disc at all phases of the orbit, while the other, the High Resolution Telescope (HRT), can resolve structures as small as 200km on the Sun at closest perihelion. The high heat load generated through proximity to the Sun is greatly reduced by the multilayer-coated entrance windows to the two telescopes that allow less than 4% of the total sunlight to enter the instrument, most of it in a narrow wavelength band around the chosen spectral line.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Autonomous on-board data processing and instrument calibration software for the SO/PHI
Authors:
K. Albert,
J. Hirzberger,
D. Busse,
T. Lange,
M. Kolleck,
B. Fiethe,
D. Orozco Suárez,
J. Woch,
J. Schou,
J. Blanco Rodríguez,
A. Gandorfer,
Y. Guan,
J. P. Cobos Carrascosa,
D. Hernández Expósito,
J. C. del Toro Iniesta,
S. K. Solanki,
H. Michalik
Abstract:
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-bo…
▽ More
The extension of on-board data processing capabilities is an attractive option to reduce telemetry for scientific instruments on deep space missions. The challenges that this presents, however, require a comprehensive software system, which operates on the limited resources a data processing unit in space allows.
We implemented such a system for the Polarimetric and Helioseismic Imager (PHI) on-board the Solar Orbiter (SO) spacecraft. It ensures autonomous operation to handle long command-response times, easy changing of the processes after new lessons have been learned and meticulous book-keeping of all operations to ensure scientific accuracy. This contribution presents the requirements and main aspects of the software implementation, followed by an example of a task implemented in the software frame, and results from running it on SO/PHI.
The presented example shows that the different parts of the software framework work well together, and that the system processes data as we expect. The flexibility of the framework makes it possible to use it as a baseline for future applications with similar needs and limitations as SO/PHI.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
