-
CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays
Authors:
Cody J. Duell,
Jason Austermann,
James Beall,
James R. Burgoyne,
Scott C. Chapman,
Steve K. Choi,
Rodrigo G. Freundt,
Jiansong Gao,
Christopher Groppi,
Anthony I. Huber,
Zachary B. Huber,
Johannes Hubmayr,
Ben Keller,
Yaqiong Li,
Lawrence T. Lin,
Justin Matthewson,
Philip Mauskopf,
Alicia Middleton,
Colin C. Murphy,
Michael D. Niemack,
Thomas Nikola,
Adrian K. Sinclair,
Ema Smith,
Jeff van Lanen,
Anna Vaskuri
, et al. (5 additional authors not shown)
Abstract:
The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submilli…
▽ More
The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
CCAT: FYST Prime-Cam Readout Software: A framework for massively scalable KID arrays
Authors:
James R. Burgoyne,
Adrian K. Sinclair,
Scott C. Chapman,
Steve K. Choi,
Cody J. Duell,
Anthony I. Huber,
Zachary B. Huber,
Ben Keller,
Lawrence Lin,
Michael D. Niemack,
Douglas Scott,
Eve M. Vavagiakis,
Samantha Walker,
Matt Xie,
the CCAT collaboration
Abstract:
We outline the development of the readout software for the Prime-Cam and Mod-Cam instruments on the CCAT Fred Young Submillimeter Telescope (FYST), primecam_readout. The instruments feature lumped-element kinetic inductance detector (LEKID) arrays driven by Xilinx ZCU111 RFSoC boards. In the current configuration, each board can drive up to 4000 KIDs, and Prime-Cam is implementing approximately 25…
▽ More
We outline the development of the readout software for the Prime-Cam and Mod-Cam instruments on the CCAT Fred Young Submillimeter Telescope (FYST), primecam_readout. The instruments feature lumped-element kinetic inductance detector (LEKID) arrays driven by Xilinx ZCU111 RFSoC boards. In the current configuration, each board can drive up to 4000 KIDs, and Prime-Cam is implementing approximately 25 boards. The software runs on a centralized control computer connected to the boards via dedicated ethernet, and facilitates such tasks as frequency-multiplexed tone comb driving, comb calibration and optimization, and detector timestream establishment. The control computer utilizes dynamically generated control channels for each board, allowing for simultaneous parallel control over all, while uniquely tracking diagnostics for each. This work demonstrates a scalable RFSoC readout architecture where computational demands increase linearly with the number of detectors, enabling control of tens-of-thousands of KIDs with modest hardware, and opening the door to the next generation of KID arrays housing millions of detectors.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Breaking the 10 mW/pixel Limit for Kinetic Inductance Detector Readout Electronics
Authors:
Adrian K. Sinclair,
James R. Burgoyne,
Yaqiong Li,
Cody Duell,
Scott C. Chapman,
Anthony I. Huber,
Ruixuan Xie
Abstract:
We demonstrate a prototype kinetic inductance detector (KID) readout system that uses less than 10 mW per pixel. The CCAT-prime RFSoC based readout is capable of reading four independent detector networks of up to 1000 KIDs each. The power dissipation was measured to be less than 40 W while running multi-tone combs on all four channels simultaneously. The system was also used for the first time to…
▽ More
We demonstrate a prototype kinetic inductance detector (KID) readout system that uses less than 10 mW per pixel. The CCAT-prime RFSoC based readout is capable of reading four independent detector networks of up to 1000 KIDs each. The power dissipation was measured to be less than 40 W while running multi-tone combs on all four channels simultaneously. The system was also used for the first time to perform sweeps and resonator identification on a prototype 280 GHz array.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
