-
A link between the size and composition of comets
Authors:
James E. Robinson,
Uri Malamud,
Cyrielle Opitom,
Hagai Perets,
Jürgen Blum
Abstract:
All cometary nuclei that formed in the early Solar System incorporated radionuclides and therefore were subject to internal radiogenic heating. Previous work predicts that if comets have a pebble-pile structure internal temperature build-up is enhanced due to very low thermal conductivity, leading to internal differentiation. An internal thermal gradient causes widespread sublimation and migration…
▽ More
All cometary nuclei that formed in the early Solar System incorporated radionuclides and therefore were subject to internal radiogenic heating. Previous work predicts that if comets have a pebble-pile structure internal temperature build-up is enhanced due to very low thermal conductivity, leading to internal differentiation. An internal thermal gradient causes widespread sublimation and migration of either ice condensates, or gases released from amorphous ice hosts during their crystallisation. Overall, the models predict that the degree of differentiation and re-distribution of volatile species to a shallower near-surface layer depends primarily on nucleus size. Hence, we hypothesise that cometary activity should reveal a correlation between the abundance of volatile species and the size of the nucleus. To explore this hypothesis we have conducted a thorough literature search for measurements of the composition and size of cometary nuclei, compiling these into a unified database. We report a statistically significant correlation between the measured abundance of CO/H$_{2}$O and the size of cometary nuclei. We further recover the measured slope of abundance as a function of size, using a theoretical model based on our previous thermophysical models, invoking re-entrapment of outward migrating high volatility gases in the near-surface pristine amorphous ice layers. This model replicates the observed trend and supports the theory of internal differentiation of cometary nuclei by early radiogenic heating. We make our database available for future studies, and we advocate for collection of more measurements to allow more precise and statistically significant analyses to be conducted in the future.
△ Less
Submitted 11 July, 2024; v1 submitted 22 March, 2024;
originally announced March 2024.
-
A Collection of German Science Interests in the Next Generation Very Large Array
Authors:
M. Kadler,
D. A. Riechers,
J. Agarwal,
A. -K. Baczko,
H. Beuther,
F. Bigiel,
T. Birnstiel,
B. Boccardi,
D. J. Bomans,
L. Boogaard,
T. T. Braun,
S. Britzen,
M. Brüggen,
A. Brunthaler,
P. Caselli,
D. Elsässer,
S. von Fellenberg,
M. Flock,
C. M. Fromm,
L. Fuhrmann,
P. Hartogh,
M. Hoeft,
R. P. Keenan,
Y. Kovalev,
K. Kreckel
, et al. (66 additional authors not shown)
Abstract:
The Next Generation Very Large Array (ngVLA) is a planned radio interferometer providing unprecedented sensitivity at wavelengths between 21 cm and 3 mm. Its 263 antenna element array will be spatially distributed across North America to enable both superb low surface brightness recovery and sub-milliarcsecond angular resolution imaging. The project was developed by the international astronomy com…
▽ More
The Next Generation Very Large Array (ngVLA) is a planned radio interferometer providing unprecedented sensitivity at wavelengths between 21 cm and 3 mm. Its 263 antenna element array will be spatially distributed across North America to enable both superb low surface brightness recovery and sub-milliarcsecond angular resolution imaging. The project was developed by the international astronomy community under the lead of the National Radio Astronomy Observatory (NRAO), and is anticipated to be built between 2027 and 2037. Two workshops have been held in 2022 and 2023 with the goal to discuss and consolidate the scientific interests in the ngVLA within the German astronomical community. This community paper constitutes a collection of 48 science ideas which the German community aims to pursue with the ngVLA in the 2030s. This is not a complete list and the ideas are not developed at the level of a "Science Book", such that the present document is mainly meant provide a basis for further discussion within the community. As such, additional contributions are welcome, and will be considered for inclusion in future revisions.
△ Less
Submitted 18 June, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Simulation and experiment of gas diffusion in a granular bed
Authors:
Carsten Güttler,
Martin Rose,
Holger Sierks,
Wolfgang Macher,
Stephan Zivithal,
Jürgen Blum,
Sunny Laddha,
Bastian Gundlach,
Günter Kargl
Abstract:
The diffusion of gas through porous material is important to understand the physical processes underlying cometary activity. We study the diffusion of a rarefied gas (Knudsen regime) through a packed bed of monodisperse spheres via experiments and numerical modelling, providing an absolute value of the diffusion coefficient and compare it to published analytical models. The experiments are designe…
▽ More
The diffusion of gas through porous material is important to understand the physical processes underlying cometary activity. We study the diffusion of a rarefied gas (Knudsen regime) through a packed bed of monodisperse spheres via experiments and numerical modelling, providing an absolute value of the diffusion coefficient and compare it to published analytical models. The experiments are designed to be directly comparable to numerical simulations, by using precision steel beads, simple geometries, and a trade-off of the sample size between small boundary effects and efficient computation. For direct comparison, the diffusion coefficient is determined in Direct Simulation Monte Carlo (DSMC) simulations, yielding a good match with experiments. This model is further-on used on a microscopic scale, which cannot be studied in experiments, to determine the mean path of gas molecules and its distribution, and compare it against an analytical model. Scaling with sample properties (particle size, porosity) and gas properties (molecular mass, temperature) is consistent with analytical models. As predicted by these, results are very sensitive on sample porosity and we find that a tortuosity $q(\varepsilon)$ depending linearly on the porosity $\varepsilon$ can well reconcile the analytical model with experiments and simulations. Mean paths of molecules are close to those described in the literature, but their distribution deviates from the expectation for small path lengths. The provided diffusion coefficients and scaling laws are directly applicable to thermophysical models of idealised cometary material.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
A quantitative description of comet 67P's dust and gas production remains enigmatic
Authors:
Dorothea Bischoff,
Christian Schuckart,
Nicholas Attree,
Bastian Gundlach,
Jürgen Blum
Abstract:
The mechanism of dust emission from a cometary nucleus is still an open question and thermophysical models have problems reproducing outgassing and dust productions rates simultaneously. In this study, we investigate the capabilities of a rather simple thermophysical model to match observations from Rosetta instruments at comet 67P/Churyumov-Gerasimenko and the influence of model variations. We as…
▽ More
The mechanism of dust emission from a cometary nucleus is still an open question and thermophysical models have problems reproducing outgassing and dust productions rates simultaneously. In this study, we investigate the capabilities of a rather simple thermophysical model to match observations from Rosetta instruments at comet 67P/Churyumov-Gerasimenko and the influence of model variations. We assume a macro-porous surface structure composed of pebbles and investigate the influence of different model assumptions. Besides the scenario in which dust layers are ejected when the vapour pressure overcomes the tensile strength, we use artificial ejection mechanisms, depending on ice-depletion of layers. We find that dust activity following the pressure criterion is only possible for reduced tensile strength values or reduced gas diffusivity and is inconsistent with observed outgassing rates, because activity is driven by CO$_2$. Only when we assume that dust activity is triggered when the layer is completely depleted in H$_2$O, the ratio of CO$_2$ to H$_2$O outgassing rates is in the expected order of magnitude. However, the dust-to-H$_2$O ratio is never reproduced. Only with decreased gas diffusivity, the slope of the H$_2$O outgassing rate is matched, however absolute values are too low. To investigate maximum reachable pressures, we adapted our model equivalent to a gas-impermeable dust structure. Here, pressures exceeding the tensile strength by orders of magnitude are possible. Maximum activity distances of $3.1 \,\mathrm{au}$, $8.2 \,\mathrm{au}$, and $74 \,\mathrm{au}$ were estimated for H$_2$O-, CO$_2$-, and CO-driven activity of $1 \,\mathrm{cm}$-sized dust, respectively. In conclusion, the mechanism behind dust emission remains unclear.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Comets and Planetesimal Formation
Authors:
Jacob B. Simon,
Jürgen Blum,
Til Birnstiel,
David Nesvorný
Abstract:
In this chapter, we review the processes involved in the formation of planetesimals and comets. We will start with a description of the physics of dust grain growth and how this is mediated by gas-dust interactions in planet-forming disks. We will then delve into the various models of planetesimal formation, describing how these planetesimals form as well as their resulting structure. In doing so,…
▽ More
In this chapter, we review the processes involved in the formation of planetesimals and comets. We will start with a description of the physics of dust grain growth and how this is mediated by gas-dust interactions in planet-forming disks. We will then delve into the various models of planetesimal formation, describing how these planetesimals form as well as their resulting structure. In doing so, we focus on and compare two paradigms for planetesimal formation: the gravitational collapse of particle over-densities (which can be produced by a variety of mechanisms) and the growth of particles into planetesimals via collisional and gravitational coagulation. Finally, we compare the predictions from these models with data collected by the Rosetta and New Horizons missions and that obtained via observations of distant Kuiper Belt Objects.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Sub-mm/mm optical properties of real protoplanetary matter derived from Rosetta/MIRO observations of comet 67P
Authors:
Johanna Bürger,
Thilo Glißmann,
Anthony Lethuillier,
Dorothea Bischoff,
Bastian Gundlach,
Harald Mutschke,
Sonja Höfer,
Sebastian Wolf,
Jürgen Blum
Abstract:
Optical properties are required for the correct understanding and modelling of protoplanetary and debris discs. By assuming that comets are the most pristine bodies in the solar system, our goal is to derive optical constants of real protoplanetary material. We determine the complex index of refraction of the near-surface material of comet 67P/Churyumov-Gerasimenko by fitting the sub-millimetre/mi…
▽ More
Optical properties are required for the correct understanding and modelling of protoplanetary and debris discs. By assuming that comets are the most pristine bodies in the solar system, our goal is to derive optical constants of real protoplanetary material. We determine the complex index of refraction of the near-surface material of comet 67P/Churyumov-Gerasimenko by fitting the sub-millimetre/millimetre observations of the thermal emission of the comet's sub-surface made by the Microwave Instrument for the Rosetta Orbiter (MIRO) with synthetic temperatures derived from a thermophysical model and radiative-transfer models. According to the two major formation scenarios of comets, we model the sub-surface layers to consist of pebbles as well as of homogeneously packed dust grains. In the case of a homogeneous dusty surface material, we find a solution for the length-absorption coefficient of $α\approx 0.22~\mathrm{cm^{-1}}$ for a wavelength of 1.594 mm and $α\geq 3.84~\mathrm{cm^{-1}}$ for a wavelength of 0.533 mm and a constant thermal conductivity of $0.006~\mathrm{Wm^{-1}K^{-1}}$. For the pebble scenario, we find for the pebbles and a wavelength of 1.594 mm a complex refractive index of $n = (1.074 - 1.256) + \mathrm{i} \, (2.580 - 7.431)\cdot 10^{-3}$ for pebble radii between 1 mm and 6 mm. Taking into account other constraints, our results point towards a pebble makeup of the cometary sub-surface with pebble radii between 3 mm and 6 mm. The derived real part of the refractive index is used to constrain the composition of the pebbles and their volume filling factor. The optical and physical properties are discussed in the context of protoplanetary and debris disc observations.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
TEMPus VoLA: the Timed Epstein Multi-pressure Vessel at Low Accelerations
Authors:
Holly L. Capelo,
Jonas Kühn,
Antoine Pommerol,
Daniele Piazza,
Mathias Brändli,
Romain Cerubini,
Bernhard Jost,
Jean-David Bodénan,
Thomas Planchet,
Stefano Spadaccia,
Rainer Schräpler,
Jürgen Blum,
Maria Schönbächler,
Lucio Mayer,
Nicolas Thomas
Abstract:
The field of planetary system formation relies extensively on our understanding of the aerodynamic interaction between gas and dust in protoplanetary disks. Of particular importance are the mechanisms triggering fluid instabilities and clumping of dust particles into aggregates, and their subsequent inclusion into planetesimals. We introduce the Timed Epstein Multi-pressure vessel at Low Accelerat…
▽ More
The field of planetary system formation relies extensively on our understanding of the aerodynamic interaction between gas and dust in protoplanetary disks. Of particular importance are the mechanisms triggering fluid instabilities and clumping of dust particles into aggregates, and their subsequent inclusion into planetesimals. We introduce the Timed Epstein Multi-pressure vessel at Low Accelerations (TEMPusVoLA), which is an experimental apparatus for the study of particle dynamics and rarefied gas under micro-gravity conditions. This facility contains three experiments dedicated to studying aerodynamic processes, i) the development of pressure gradients due to collective particle-gas interaction, ii) the drag coefficients of dust aggregates with variable particle-gas velocity, iii) the effect of dust on the profile of a shear flow and resultant onset of turbulence. The approach is innovative with respect to previous experiments because we access an untouched parameter space in terms of dust particle packing fraction, and Knudsen, Stokes, and Reynolds numbers. The mechanisms investigated are also relevant for our understanding of the emission of dust from active surfaces such as cometary nuclei and new experimental data will help interpreting previous datasets (Rosetta) and prepare future spacecraft observations (Comet Interceptor). We report on the performance of the experiments, which has been tested over the course of multiple flight campaigns. The project is now ready to benefit from additional flight campaigns, to cover a wide parameter space. The outcome will be a comprehensive framework to test models and numerical recipes for studying collective dust particle aerodynamics under space-like conditions.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
Widespread Detection of Two Components in the Hot Circumgalactic Medium of the Milky Way
Authors:
Jesse Bluem,
Philip Kaaret,
K. D. Kuntz,
Keith M. Jahoda,
Dimitra Koutroumpa,
Edmund J. Hodges-Kluck,
Chase A. Fuller,
Daniel M. LaRocca,
Anna Zajczyk
Abstract:
Surrounding the Milky Way (MW) is the circumgalactic medium (CGM), an extended reservoir of hot gas that has significant implications for the evolution of the MW. We used the HaloSat all-sky survey to study the CGM's soft X-ray emission in order to better define its distribution and structure. We extend a previous HaloSat study of the southern CGM (Galactic latitude b < -30 deg) to include the nor…
▽ More
Surrounding the Milky Way (MW) is the circumgalactic medium (CGM), an extended reservoir of hot gas that has significant implications for the evolution of the MW. We used the HaloSat all-sky survey to study the CGM's soft X-ray emission in order to better define its distribution and structure. We extend a previous HaloSat study of the southern CGM (Galactic latitude b < -30 deg) to include the northern CGM (b > 30 deg) and find evidence that at least two hot gas model components at different temperatures are required to produce the observed emission. The cooler component has a typical temperature of kT ~ 0.18 keV, while the hotter component has a typical temperature of kT ~ 0.7 keV. The emission measure in both the warm and hot components has a wide range (~ 0.005 - 0.03, ~ 0.0005 - 0.004 cm-6 pc respectively), indicating that the CGM is clumpy. A patch of relatively consistent CGM was found in the north, allowing for the CGM spectrum to be studied in finer detail using a stacked spectrum. The stacked spectrum is well described with a model including two hot gas components at temperatures of kT = 0.166 +/- 0.005 keV and kT = 0.69 +0.04 -0.05 keV. As an alternative to adding a hot component, a neon-enhanced single-temperature model of the CGM was also tested and found to have worse fit statistics and poor residuals.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Formation of Comets
Authors:
Jürgen Blum,
Dorothea Bischoff,
Bastian Gundlach
Abstract:
Questions regarding how primordial or pristine the comets of the solar system are have been an ongoing controversy. In this review, we describe comets' physical evolution from dust and ice grains in the solar nebula to the contemporary small bodies in the outer solar system. This includes the phases of dust agglomeration, the formation of planetesimals, their thermal evolution and the outcomes of…
▽ More
Questions regarding how primordial or pristine the comets of the solar system are have been an ongoing controversy. In this review, we describe comets' physical evolution from dust and ice grains in the solar nebula to the contemporary small bodies in the outer solar system. This includes the phases of dust agglomeration, the formation of planetesimals, their thermal evolution and the outcomes of collisional processes. We use empirical evidence about comets, in particular from the Rosetta Mission to comet 67P/Churyumov--Gerasimenko, to draw conclusions about the possible thermal and collisional evolution of comets.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Are there any pristine comets? Constraints from pebble structure
Authors:
Uri Malamud,
Wolf A. Landeck,
Dorothea Bischoff,
Christopher Kreuzig,
Hagai B. Perets,
Bastian Gundlach,
Jurgen Blum
Abstract:
We show that if comets (or any small icy planetesimals such as Kuiper belt objects) are composed of pebble piles, their internal radiogenic as well as geochemical heating results in considerably different evolutionary outcomes compared to similar past studies. We utilize a 1D thermo-physical evolution code, modified to include state-of-the-art empirical measurements of pebble thermal conductivity…
▽ More
We show that if comets (or any small icy planetesimals such as Kuiper belt objects) are composed of pebble piles, their internal radiogenic as well as geochemical heating results in considerably different evolutionary outcomes compared to similar past studies. We utilize a 1D thermo-physical evolution code, modified to include state-of-the-art empirical measurements of pebble thermal conductivity and compression, the latter obtained through a new laboratory experiment presented here for the first time. Results indicate that due to the low pebble thermal conductivity, the peak temperatures attained during evolution are much higher than in any previous study given the same formation time. Assuming meteoritic radiogenic abundances, we find that only extremely small, sub-kilometre comets have the potential to retain the primordial, uniform and thermally unprocessed composition from which they formed. Comets with radii in excess of about 20 km are typically swept by rapid and energetically powerful aqueous hydration reactions. Across the full range of comet sizes and formation times, evolutions result in the processing and differentiation of various volatile species, and a radially heterogeneous nucleus stucture. Our computations however also indicate that the assumed fraction of radionuclides is a pivotal free parameter, because isotopic analyses of the only available cometary samples suggest that no 26Al was ever present in comet 81P/Wild 2. We show that if comets formed early in the protoplanetary disc (within 1-3 Myr), the radionuclide abundances indeed must be much smaller than those typically assumed based on meteoritic samples. We discuss the importance of our findings for the formation, present-day attributes and future research of comets.
△ Less
Submitted 31 May, 2022;
originally announced June 2022.
-
Rapid turn-on of a luminous X-ray source in the candidate Lyman continuum emitting galaxy Tol 0440-381
Authors:
P. Kaaret,
J. Bluem,
A. H. Prestwich
Abstract:
Chandra observations of the nearby, candidate Lyman-continuum (LyC) emitting galaxy Tol 0440-381 show brightening of an X-ray source by at least a factor of 4 to a luminosity of 1.6E40 erg/s over 3.8~days. The X-ray emission likely arises from either a low-luminosity AGN or an ultraluminous X-ray source. The properties of the X-ray source are similar to those found in Haro 11 and Tololo 1247-232,…
▽ More
Chandra observations of the nearby, candidate Lyman-continuum (LyC) emitting galaxy Tol 0440-381 show brightening of an X-ray source by at least a factor of 4 to a luminosity of 1.6E40 erg/s over 3.8~days. The X-ray emission likely arises from either a low-luminosity AGN or an ultraluminous X-ray source. The properties of the X-ray source are similar to those found in Haro 11 and Tololo 1247-232, the only other LyC-emitting galaxies that have been resolved in X-rays. All three galaxies host luminous, variable, and hard spectrum X-ray sources that are likely accretion-powered. Accretion onto compact objects produces powerful outflows and ionizing radiation that could help enable LyC escape.
△ Less
Submitted 9 January, 2022;
originally announced January 2022.
-
Collisional properties of cm-sized high-porosity ice and dust aggregates and their applications to early planet formation
Authors:
Rainer R. Schräpler,
Wolf A. Landeck,
Jürgen Blum
Abstract:
In dead zones of protoplanetary discs, it is assumed that micrometre-sized particles grow Brownian, sediment to the midplane and drift radially inward. When collisional compaction sets in, the growing aggregates collect slower and therefore dynamically smaller particles. This sedimentation and growth phase of highly porous ice and dust aggregates is simulated with laboratory experiments in which w…
▽ More
In dead zones of protoplanetary discs, it is assumed that micrometre-sized particles grow Brownian, sediment to the midplane and drift radially inward. When collisional compaction sets in, the growing aggregates collect slower and therefore dynamically smaller particles. This sedimentation and growth phase of highly porous ice and dust aggregates is simulated with laboratory experiments in which we obtained mm- to cm-sized ice aggregates with a porosity of 90\% as well as cm-sized dust agglomerates with a porosity of 85\%. We modelled the growth process during sedimentation in an analytical calculation to compute the agglomerate sizes when they reach the midplane of the protoplanetary disc. In the midplane, the dust particles form a thin dense layer and gain relative velocities by, e.g., the streaming instability or the onset of shear turbulence. To investigate also these collisions, we performed additional laboratory drop tower experiments with the high-porosity aggregates formed in the sedimentary-growth experiments and determined their mechanical parameters, including their sticking threshold velocity, which is important for their further collisional evolution on their way to form planetesimals. Finally, we developed a method to calculate the packing-density-dependent fundamental properties of our dust and ice agglomerates, the Young's modulus, the Poisson ratio, the shear viscosity and the bulk viscosity from compression measurements. With these parameters, it was possible to derive the coefficient of restitution which fits our measurements. In order to physically describe these outcomes, we applied a collision model. With this model, predictions about general dust-aggregate collisions are possible.
△ Less
Submitted 1 February, 2022; v1 submitted 17 November, 2021;
originally announced November 2021.
-
Cometary dust analogues for physics experiments
Authors:
A. Lethuillier,
C. Feller,
E. Kaufmann,
P. Becerra,
N. Hänni,
R. Diethelm,
C. Kreuzig,
B. Gundlach,
J. Blum,
A. Pommerol,
G. Kargl,
E. Kührt,
H. Capelo,
D. Haack,
X. Zhang,
J. Knollenberg,
N. S. Molinski,
T. Gilke,
H. Sierks,
P. Tiefenbacher,
C. Güttler,
K. A. Otto,
D. Bischoff,
M. Schweighart,
A. Hagermann
, et al. (1 additional authors not shown)
Abstract:
The CoPhyLab (Cometary Physics Laboratory) project is designed to study the physics of comets through a series of earth-based experiments. For these experiments, a dust analogue was created with physical properties comparable to those of the non-volatile dust found on comets. This "CoPhyLab dust" is planned to be mixed with water and CO$_2$ ice and placed under cometary conditions in vacuum chambe…
▽ More
The CoPhyLab (Cometary Physics Laboratory) project is designed to study the physics of comets through a series of earth-based experiments. For these experiments, a dust analogue was created with physical properties comparable to those of the non-volatile dust found on comets. This "CoPhyLab dust" is planned to be mixed with water and CO$_2$ ice and placed under cometary conditions in vacuum chambers to study the physical processes taking place on the nuclei of comets. In order to develop this dust analogue, we mixed two components representative for the non-volatile materials present in cometary nuclei. We chose silica dust as representative for the mineral phase and charcoal for the organic phase, which also acts as a darkening agent. In this paper, we provide an overview of known cometary analogues before presenting measurements of eight physical properties of different mixtures of the two materials and a comparison of these measurements with known cometary values. The physical properties of interest are: particle size, density, gas permeability, spectrophotometry, mechanical, thermal and electrical properties. We found that the analogue dust that matches the highest number of physical properties of cometary materials consists of a mixture of either 60\%/40\% or 70\%/30\% of silica dust/charcoal by mass. These best-fit dust analogue will be used in future CoPhyLab experiments.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Learning about comets from the study of mass distributions and fluxes of meteoroid streams
Authors:
Josep M. Trigo-Rodríguez,
Jürgen Blum
Abstract:
Meteor physics can provide new clues about the size, structure, and density of cometary disintegration products, establishing a bridge between different research fields. From meteor magnitude data we have estimated the mass distribution of meteoroids from different cometary streams by using the relation between the luminosity and the mass obtained by Verniani (1973). These mass distributions are i…
▽ More
Meteor physics can provide new clues about the size, structure, and density of cometary disintegration products, establishing a bridge between different research fields. From meteor magnitude data we have estimated the mass distribution of meteoroids from different cometary streams by using the relation between the luminosity and the mass obtained by Verniani (1973). These mass distributions are in the range observed for dust particles released from comets 1P/Halley and 81P/Wild 2 as measured from spacecraft. From the derived mass distributions, we have integrated the incoming mass for the most significant meteor showers. By comparing the mass of the collected Interplanetary Dust Particles (IDPs) with that derived for cometary meteoroids a gap of several orders of magnitude is encountered. The largest examples of fluffy particles are clusters of IDPs no larger than 100 micrometers in size (or 5x10^-7 g in mass) while the largest cometary meteoroids are centimeter-sized objects. Such gaps can be explained by the fragmentation in the interstellar medium or in the atmosphere of the original cometary particles. As an application of the mass distribution computations we describe the significance of the disruption of fragile comets in close approaches to Earth as a more efficient (and probably more frequent) way to deliver volatiles than direct impacts. We finally apply our model to quantify the flux of meteoroids from different meteoroid streams, and to describe the main physical processes contributing to the progressive decay of cometary meteoroids in the interplanetary medium.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
A method to distinguish between micro- and macro-granular surfaces of small Solar System bodies
Authors:
D. Bischoff,
B. Gundlach,
J. Blum
Abstract:
The surface granularity of small Solar System bodies is diverse through the different types of planetary bodies and even for specific objects it is often not known in detail. One of the physical properties that strongly depends on the surface structure is the surface temperature. In highly porous media with large voids, radiation can efficiently transport heat, whereas more compact, micro-porous s…
▽ More
The surface granularity of small Solar System bodies is diverse through the different types of planetary bodies and even for specific objects it is often not known in detail. One of the physical properties that strongly depends on the surface structure is the surface temperature. In highly porous media with large voids, radiation can efficiently transport heat, whereas more compact, micro-porous structures transport the heat primarily by conduction through the solid material. In this work, we investigate under which conditions a macro-porous surface can be distinguished from a micro-porous one by simply measuring the surface temperature. In our numerical simulations, we included circular and elliptical orbits with and without obliquity and varied the rotation period of the considered objects. We found that daily temperature cycles are rather insensitive to the specific surface granularity. However, the surface temperature at sunrise shows significant dependency on the material structure and this effect becomes even more pronounced when the solar intensity increases. By measuring the sunrise temperature as a function of insolation at noon, a differentiation between micro- and macro-granular surface structures is possible. In this paper, we provide a strategy how remote sensing can be used to derive the surface structure of small Solar System bodies.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Observations of the long-lasting activity of the distant Comets 29P Schwassmann-Wachmann 1, C/2003 WT42 (LINEAR) and C/2002 VQ94 (LINEAR)
Authors:
Oleksandra Ivanova,
Yury Skorov,
Pavlo Korsun,
Viktor Afanasiev,
Jürgen Blum
Abstract:
We investigated three comets, which are active at large heliocentric distances, using observations obtained at the 6-m BTA telescope (SAO RAS, Russia) in the photometric mode of the focal reducer SCORPIO. The three comets, 29P/Schwassmann-Wachmann 1, C/2003 WT42 (LINEAR), and C/2002 VQ94 (LINEAR), were observed after their perihelion passages at heliocentric distances between 5.5 and 7.08 AU. The…
▽ More
We investigated three comets, which are active at large heliocentric distances, using observations obtained at the 6-m BTA telescope (SAO RAS, Russia) in the photometric mode of the focal reducer SCORPIO. The three comets, 29P/Schwassmann-Wachmann 1, C/2003 WT42 (LINEAR), and C/2002 VQ94 (LINEAR), were observed after their perihelion passages at heliocentric distances between 5.5 and 7.08 AU. The dust production rates in terms of Afrho was measured for these comets. Using the retrieved values, an average dust production rate was derived under different model assumptions. A tentative calculation of the total mass loss of the comet nucleus within a certain observation period was executed. We calculated the corresponding thickness of the depleted uppermost layer where high-volatile ices completely sublimated. The results obtained in our study strongly support the idea that the observed activity of Comet SW1 requires a permanent demolition of the upper surface layers.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
A HaloSat Analysis of the Cygnus Superbubble
Authors:
Jesse Bluem,
Philip Kaaret,
William Fuelberth,
Anna Zajczyk,
Daniel M. LaRocca,
R. Ringuette,
Keith M. Jahoda,
K. D. Kuntz
Abstract:
The Cygnus Superbubble (CSB) is a region of soft X-ray emission approximately 13 degrees wide in the direction of the local spiral arm. Such a large region might be the result of strong stellar winds and supernovae from nearby stellar nurseries, or it could be the result of a single event - a hypernova. HaloSat observed 4 non-overlapping 10 degree diameter fields in the CSB region over the 0.4-7 k…
▽ More
The Cygnus Superbubble (CSB) is a region of soft X-ray emission approximately 13 degrees wide in the direction of the local spiral arm. Such a large region might be the result of strong stellar winds and supernovae from nearby stellar nurseries, or it could be the result of a single event - a hypernova. HaloSat observed 4 non-overlapping 10 degree diameter fields in the CSB region over the 0.4-7 keV band. The CSB absorption and temperature was found to be consistent over all 4 fields, with a weighted average of 6.1x10^21 cm^-2 and 0.190 keV, respectively. These observations suggest that the CSB is a cohesive object with a singular origin. The total thermal energy for the CSB is estimated at 4x10^52 erg, based upon a shell-like physical model of the CSB. Absorption and distance estimates to Cyg OB associations are examined. The CSB absorption is found to be most consistent with the absorption seen in Cyg OB1, implying that the CSB lies at a similar distance of 1.1-1.4 kpc.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
A disk-dominated and clumpy circumgalactic medium of the Milky Way seen in X-ray emission
Authors:
P. Kaaret,
D. Koutroumpa,
K. D. Kuntz,
K. Jahoda,
J. Bluem,
H. Gulick,
E. Hodges-Kluck,
D. M. LaRocca,
R. Ringuette,
A. Zajczyk
Abstract:
The Milky Way galaxy is surrounded by a circumgalactic medium (CGM) that may play a key role in galaxy evolution as the source of gas for star formation and a repository of metals and energy produced by star formation and nuclear activity. The CGM may also be a repository for baryons seen in the early universe, but undetected locally. The CGM has an ionized component at temperatures near…
▽ More
The Milky Way galaxy is surrounded by a circumgalactic medium (CGM) that may play a key role in galaxy evolution as the source of gas for star formation and a repository of metals and energy produced by star formation and nuclear activity. The CGM may also be a repository for baryons seen in the early universe, but undetected locally. The CGM has an ionized component at temperatures near $2 \times 10^{6}$~K studied primarily in the soft X-ray band. Here we report a survey of the southern Galactic sky with a soft X-ray spectrometer optimized to study diffuse soft X-ray emission. The X-ray emission is best fit with a disc-like model based on the radial profile of the surface density of molecular hydrogen, a tracer of star formation, suggesting that the X-ray emission is predominantly from hot plasma produced via stellar feedback. Strong variations in the X-ray emission on angular scales of $\sim10^{\circ}$ indicate that the CGM is clumpy. Addition of an extended, and possibly massive, halo component is needed to match the halo density inferred from other observations.
△ Less
Submitted 30 October, 2020;
originally announced November 2020.
-
Critical Laboratory Studies to Advance Planetary Science and Support Missions
Authors:
Edith Fayolle,
Laurie Barge,
Morgan Cable,
Brian Drouin,
Jason Dworkin,
Jennifer Hanley,
Bryana Henderson,
Baptiste Journaux,
Aaron Noell,
Farid Salama,
Ella Sciamma-O'Brien,
Sarah Waller,
Jessica Weber,
Christopher Bennett,
Jurgen Blum,
Murthy Gudipati,
Stefanie Milam,
Mohit Melwani-Daswani,
Michel Nuevo,
Silvia Protopapa,
Rachel Smith
Abstract:
Laboratory studies for planetary science and astrobiology aimat advancing our understanding of the Solar System through the promotion of theoretical and experimental research into the underlying processes that shape it. Laboratory studies (experimental and theoretical) are crucial to interpret observations and mission data, and are key incubators for new mission concepts as well as instrument deve…
▽ More
Laboratory studies for planetary science and astrobiology aimat advancing our understanding of the Solar System through the promotion of theoretical and experimental research into the underlying processes that shape it. Laboratory studies (experimental and theoretical) are crucial to interpret observations and mission data, and are key incubators for new mission concepts as well as instrument development and calibration. They also play a vital role in determining habitability of Solar System bodies, enhancing our understanding of the origin of life, and in the search for signs of life beyond Earth, all critical elements of astrobiology. Here we present an overview of the planetary science areas where laboratory studies are critically needed, in particular in the next decade. These areas include planetary & satellites atmospheres, surfaces, and interiors, primitive bodies such as asteroids, meteorites, comets, and trans-Neptunian objects, and signs of life. Generating targeted experimental and theoretical laboratory data that are relevant for a better understanding of the physical, chemical, and biological processes occurring in these environments is crucial. For each area we present i) a brief overview of the state-of-the-art laboratory work, ii) the challenges to analyze and interpret data sets from missions and ground-based observations and to support mission and concept development, and iii) recommendations for high priority laboratory studies.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
The tensile strength of compressed dust samples and the catastrophic disruption threshold of pre-planetary matter
Authors:
I. L. San Sebastián,
A. Dolff,
J. Blum,
M. G. Parisi,
S. Kothe
Abstract:
During the planetary formation process, mutual collisions among planetesimals take place, making an impact on their porosity evolution. The outcome of these collisions depends, among other parameters, on the tensile strength of the colliding objects. In the first stage of this work, we performed impact experiments into dust samples, assembled with material analogous to that of the primitive Solar…
▽ More
During the planetary formation process, mutual collisions among planetesimals take place, making an impact on their porosity evolution. The outcome of these collisions depends, among other parameters, on the tensile strength of the colliding objects. In the first stage of this work, we performed impact experiments into dust samples, assembled with material analogous to that of the primitive Solar System, to obtain highly compressed samples that represent the porosities measured in chondritic meteorites. In the second stage, we obtained the tensile strengths of the compressed dust samples by the Brazilian Disk Test. We found a correlation between the tensile strength and the volume filling factor of the compressed dust samples and obtained the corresponding critical fragmentation strength in mutual collisions and its dependence on the volume filling factor. Finally, we give prescriptions for the catastrophic disruption threshold as a function of the object size, for different values of the volume filling factor that can be utilized in collisional models.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Sticky or not sticky? Measurements of the tensile strength of micro-granular organic materials
Authors:
Dorothea Bischoff,
Christopher Kreuzig,
David Haack,
Bastian Gundlach,
Jürgen Blum
Abstract:
Knowledge of the mechanical properties of protoplanetary and cometary matter is of key importance to better understand the activity of comets and the early stages of planet formation. The tensile strength determines the required pressure to lift off grains, pebbles and agglomerates from the cometary surface and also describes how much strain a macroscopic body can withstand before material failure…
▽ More
Knowledge of the mechanical properties of protoplanetary and cometary matter is of key importance to better understand the activity of comets and the early stages of planet formation. The tensile strength determines the required pressure to lift off grains, pebbles and agglomerates from the cometary surface and also describes how much strain a macroscopic body can withstand before material failure occurs. As organic materials are ubiquitous in space, they could have played an important role during the planet formation process. This work provides new data on the tensile strength of five different micro-granular organic materials, namely, humic acid, paraffin, brown coal, charcoal and graphite. These materials are investigated by the so-called Brazilian Disc Test and the resulting tensile strength values are normalised to a standard grain size and volume filling factor. We find that the tensile strength of these materials ranges over four orders of magnitude. Graphite and paraffin possess tensile strengths much higher than silica, whereas coals have very low tensile strength values. This work demonstrates that organic materials are not generally stickier than silicates, or water ice, as often believed.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Comparing the reflectivity of ungrouped carbonaceous chondrites with that of short period comets like 2P/Encke
Authors:
Safoura Tanbakouei,
Josep M. Trigo-Rodriguez,
Jurgen blum,
Iwan Williams,
Jordi Llorca
Abstract:
Aims. The existence of asteroid complexes produced by the disruption of these comets suggests that evolved comets could also produce high-strength materials able to survive as meteorites. We chose as an example comet 2P/Encke, one of the largest object of the so-called Taurid complex. We compare the reflectance spectrum of this comet with the laboratory spectra of some Antarctic ungrouped carbonac…
▽ More
Aims. The existence of asteroid complexes produced by the disruption of these comets suggests that evolved comets could also produce high-strength materials able to survive as meteorites. We chose as an example comet 2P/Encke, one of the largest object of the so-called Taurid complex. We compare the reflectance spectrum of this comet with the laboratory spectra of some Antarctic ungrouped carbonaceous chondrites to investigate whether some of these meteorites could be associated with evolved comets. Methods. We compared the spectral behaviour of 2P/Encke with laboratory spectra of carbonaceous chondrites. Different specimens of the common carbonaceous chondrite groups do not match the overall features and slope of comet 2P/Encke. Trying anomalous carbonaceous chondrites, we found two meteorites, Meteorite Hills 01017 and Grosvenor Mountains 95551, which could be good proxies for the dark materials forming this short-period comet. We hypothesise that these two meteorites could be rare surviving samples, either from the Taurid complex or another compositionally similar body. In any case, it is difficult to get rid of the effects of terrestrial weathering in these Antarctic finds, and further studies are needed. Future sample return from the so-called dormant comets could be also useful to establish a ground truth on the materials forming evolved short-period comets. Results. As a natural outcome, we think that identifying good proxies of 2P/Encke-forming materials might have interesting implications for future sample-return missions to evolved, potentially dormant or extinct comets. To understand the compositional nature of evolved comets is particularly relevant in the context of the future mitigation of impact hazard from these dark and dangerous projectiles.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Global X-Ray Properties of the Vela and Puppis A Supernova Remnants
Authors:
E. M. Silich,
P. Kaaret,
A. Zajczyk,
D. M. LaRocca,
J. Bluem,
R. Ringuette,
K. Jahoda,
K. D. Kuntz
Abstract:
The Vela and Puppis A supernova remnants (SNRs) comprise a large emission region of $\sim 8^{\circ}$ diameter in the soft X-ray sky. The HaloSat CubeSat mission provides the first soft X-ray ($0.4-7$ keV) observation of the entire Vela SNR and Puppis A SNR region with a single pointing and moderate spectral resolution. HaloSat observations of the Vela SNR are best fit with a two-temperature therma…
▽ More
The Vela and Puppis A supernova remnants (SNRs) comprise a large emission region of $\sim 8^{\circ}$ diameter in the soft X-ray sky. The HaloSat CubeSat mission provides the first soft X-ray ($0.4-7$ keV) observation of the entire Vela SNR and Puppis A SNR region with a single pointing and moderate spectral resolution. HaloSat observations of the Vela SNR are best fit with a two-temperature thermal plasma model consisting of a cooler component with $kT_{1} = 0.19^{+0.01}_{-0.01}$ keV in collisional ionization equilibrium and a hotter component with $kT_{2} = 1.06^{+0.45}_{-0.27}$ keV in non-equilibrium ionization. Observations of the Puppis A SNR are best fit with a single-component plane-parallel shocked plasma model with $kT = 0.86^{+0.06}_{-0.05}$ keV in non-equilibrium ionization. For the first time, we find the total X-ray luminosities of both components of the Vela SNR spectrum in the $0.5-7$ keV energy band to be $L_X = 4.4^{+1.4}_{-1.4} \times 10^{34}$ erg s$^{-1}$ for the cooler component and $L_X = 4.1^{+1.8}_{-1.5} \times 10^{34}$ erg s$^{-1}$ for the hotter component. We find the total X-ray luminosities of the Vela and Puppis A SNRs to be $L_{\text{X}} = 8.4 \times 10^{34}$ erg s$^{-1}$ and $L_X = 6.7^{+1.1}_{-0.9} \times 10^{36}$ erg s$^{-1}$.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Activity of (6478) Gault during January 13 - March 28, 2019
Authors:
Oleksandra Ivanova,
Yuri Skorov,
Igor Luk'yanyk,
Dušan Tomko,
Marek Husárik,
Jürgen Blum,
Oleg Egorov,
Olga Voziakova
Abstract:
We present the results of photometric observations of active asteroid (6478) Gault performed at heliocentric distances from 2.46 to 2.30 au and geocentric distances from 1.79 to 1.42 au between January 15 and March 28, 2019. Observations were carried out at the 2.5-m telescope of SAI MSU (CMO) on January 15, 2019 and at the 1.3-m and 0.61-m telescopes (SPb) on February 6 and March 28, 2019, respec…
▽ More
We present the results of photometric observations of active asteroid (6478) Gault performed at heliocentric distances from 2.46 to 2.30 au and geocentric distances from 1.79 to 1.42 au between January 15 and March 28, 2019. Observations were carried out at the 2.5-m telescope of SAI MSU (CMO) on January 15, 2019 and at the 1.3-m and 0.61-m telescopes (SPb) on February 6 and March 28, 2019, respectively. The direct images of the asteroid were obtained with the broad-band B, V and R filters. Comet-like structures were detected at all observation dates. Colour maps were built and colour variations along the tail for the observation made on January 15, 2019 were analyzed. The $Afρ$ was calculated for the R filter, The evaluated value varies from 47 to 32 cm for the period from January to the end of March, 2019. The rotational period of the body is estimated from the light curve by different methods and is about 1.79 hr. Possible mechanisms of triggering Gault's activity are discussed.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
HaloSat -- A CubeSat to Study the Hot Galactic Halo
Authors:
P. Kaaret,
A. Zajczyk,
D. M. LaRocca,
R. Ringuette,
J. Bluem,
W. Fuelberth,
H. Gulick,
K. Jahoda,
T. E. Johnson,
D. L. Kirchner,
D. Koutroumpa,
K. D. Kuntz,
R. McCurdy,
D. M. Miles,
W. T. Robison,
E. M. Silich
Abstract:
HaloSat is a small satellite (CubeSat) designed to map soft X-ray oxygen line emission across the sky in order to constrain the mass and spatial distribution of hot gas in the Milky Way. The goal of HaloSat is to help determine if hot gas gravitationally bound to individual galaxies makes a significant contribution to the cosmological baryon budget. HaloSat was deployed from the International Spac…
▽ More
HaloSat is a small satellite (CubeSat) designed to map soft X-ray oxygen line emission across the sky in order to constrain the mass and spatial distribution of hot gas in the Milky Way. The goal of HaloSat is to help determine if hot gas gravitationally bound to individual galaxies makes a significant contribution to the cosmological baryon budget. HaloSat was deployed from the International Space Station in July 2018 and began routine science operations in October 2018. We describe the goals and design of the mission, the on-orbit performance of the science instrument, and initial observations.
△ Less
Submitted 16 October, 2019; v1 submitted 30 September, 2019;
originally announced September 2019.
-
AMBITION -- Comet Nucleus Cryogenic Sample Return (White paper for ESA's Voyage 2050 programme)
Authors:
D. Bockelée-Morvan,
G. Filacchione,
K. Altwegg,
E. Bianchi,
M. Bizzarro,
J. Blum,
L. Bonal,
F. Capaccioni,
C. Codella,
M. Choukroun,
H. Cottin,
B. Davidsson,
M. C. De Sanctis,
M. Drozdovskaya,
C. Engrand,
M. Galand,
C. Güttler,
P. Henri,
A. Herique,
S. Ivanoski,
R. Kokotanekova,
A. -C. Levasseur-Regourd,
K. E. Miller,
A. Rotundi,
M. Schönbächler
, et al. (5 additional authors not shown)
Abstract:
This white paper proposes that AMBITION, a Comet Nucleus Sample Return mission, be a cornerstone of ESA's Voyage 2050 programme. We summarise some of the most important questions still open in cometary science after the successes of the Rosetta mission, many of which require sample analysis using techniques that are only possible in laboratories on Earth. We then summarise measurements, instrument…
▽ More
This white paper proposes that AMBITION, a Comet Nucleus Sample Return mission, be a cornerstone of ESA's Voyage 2050 programme. We summarise some of the most important questions still open in cometary science after the successes of the Rosetta mission, many of which require sample analysis using techniques that are only possible in laboratories on Earth. We then summarise measurements, instrumentation and mission scenarios that can address these questions, with a recommendation that ESA select an ambitious cryogenic sample return mission. Rendezvous missions to Main Belt comets and Centaurs are compelling cases for M-class missions, expanding our knowledge by exploring new classes of comets. AMBITION would engage a wide community, drawing expertise from a vast range of disciplines within planetary science and astrophysics. With AMBITION, Europe will continue its leadership in the exploration of the most primitive Solar System bodies.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Enhanced X-ray emission from candidate Lyman continuum emitting galaxies
Authors:
Jesse Bluem,
Philip Kaaret,
Andrea Prestwich,
Matthew Brorby
Abstract:
X-ray binaries may have helped reionize the early Universe by enabling Lyman continuum escape. We analyzed a set of 8 local galaxies that are potential Lyman leaking galaxies, identified by a blue color and weak emission lines, using Chandra X-ray observations. Five of the galaxies feature X-ray sources, while three galaxies are not significantly detected in X-rays. X-ray luminosities were found f…
▽ More
X-ray binaries may have helped reionize the early Universe by enabling Lyman continuum escape. We analyzed a set of 8 local galaxies that are potential Lyman leaking galaxies, identified by a blue color and weak emission lines, using Chandra X-ray observations. Five of the galaxies feature X-ray sources, while three galaxies are not significantly detected in X-rays. X-ray luminosities were found for the galaxies and X-ray sources. Four of the galaxies have elevated X-ray luminosity versus what would be expected based on star formation rate and metallicity. The presence of detected X-ray sources within the galaxies is found to correlate with the ratio of the star formation rate estimated from the near-ultraviolet flux to that estimated from the infrared. This implies reduced obscuration due to dust in the galaxies with X-ray sources. These results support the idea that X-ray binaries may be an important part of the process of reionziation.
△ Less
Submitted 29 June, 2019;
originally announced July 2019.
-
The footprint of cometary dust analogues: II. Morphology as a tracer of tensile strength and application to dust collection by the Rosetta spacecraft
Authors:
L. E. Ellerbroek,
B. Gundlach,
A. Landeck,
C. Dominik,
J. Blum,
S. Merouane,
M. Hilchenbach,
H. John,
H. A. van Veen
Abstract:
The structure of cometary dust is a tracer of growth processes in the formation of planetesimals. Instrumentation on board the Rosetta mission to comet 67P/Churyumov- Gerasimenko captured dust particles and analysed them in situ. However, these deposits are a product of a collision within the instrument. We conducted laboratory experiments with cometary dust analogues, simulating the collection pr…
▽ More
The structure of cometary dust is a tracer of growth processes in the formation of planetesimals. Instrumentation on board the Rosetta mission to comet 67P/Churyumov- Gerasimenko captured dust particles and analysed them in situ. However, these deposits are a product of a collision within the instrument. We conducted laboratory experiments with cometary dust analogues, simulating the collection process by Rosetta instruments (specifically COSIMA, MIDAS). In Paper I we reported that velocity is a key driver in determining the appearance of deposits. Here in Paper II we use materials with different monomer sizes, and study the effect of tensile strength on the appearance of deposits. We find that mass transfer efficiency increases from $\sim$1 up to $\sim$10% with increasing monomer diameter from 0.3 $μ$m to 1.5 $μ$m (i.e. tensile strength decreasing from $\sim$12 to $\sim$3 kPa), and velocities increasing from 0.5 to 6 m/s. Also, the relative abundance of small fragments after impact is higher for material with higher tensile strength. The degeneracy between the effects of velocity and material strength may be lifted by performing a closer study of the deposits. This experimental method makes it possible to estimate the mass transfer efficiency in the COSIMA instrument. Extrapolating these results implies that more than half of the dust collected during the Rosetta mission has not been imaged. We analysed two COSIMA targets containing deposits from single collisions. The collision that occurred closest to perihelion passage led to more small fragments on the target.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Synthesis of the Morphological Description of Cometary Dust at Comet 67P
Authors:
C. Güttler,
T. Mannel,
A. Rotundi,
S. Merouane,
M. Fulle,
D. Bockelée-Morvan,
J. Lasue,
A. C. Levasseur-Regourd,
J. Blum,
G. Naletto,
H. Sierks,
M. Hilchenbach,
C. Tubiana,
F. Capaccioni,
J. A. Paquette,
A. Flandes,
F. Moreno,
J. Agarwal,
D. Bodewits,
I. Bertini,
G. P. Tozzi,
K. Hornung,
Y. Langevin,
H. Krüger,
A. Longobardo
, et al. (6 additional authors not shown)
Abstract:
Before Rosetta, the space missions Giotto and Stardust shaped our view on cometary dust, supported by plentiful data from Earth based observations and interplanetary dust particles collected in the Earth's atmosphere. The Rosetta mission at comet 67P/Churyumov-Gerasimenko was equipped with a multitude of instruments designed to study cometary dust. While an abundant amount of data was presented in…
▽ More
Before Rosetta, the space missions Giotto and Stardust shaped our view on cometary dust, supported by plentiful data from Earth based observations and interplanetary dust particles collected in the Earth's atmosphere. The Rosetta mission at comet 67P/Churyumov-Gerasimenko was equipped with a multitude of instruments designed to study cometary dust. While an abundant amount of data was presented in several individual papers, many focused on a dedicated measurement or topic. Different instruments, methods, and data sources provide different measurement parameters and potentially introduce different biases. This can be an advantage if the complementary aspect of such a complex data set can be exploited. However, it also poses a challenge in the comparison of results in the first place. The aim of this work therefore is to summarise dust results from Rosetta and before. We establish a simple classification as a common framework for inter-comparison. This classification is based on a dust particle's structure, porosity, and strength as well as its size. Depending on the instrumentation, these are not direct measurement parameters but we chose them as they were the most reliable to derive our model. The proposed classification already proved helpful in the Rosetta dust community and we propose to take it into consideration also beyond. In this manner we hope to better identify synergies between different instruments and methods in the future.
△ Less
Submitted 27 February, 2019;
originally announced February 2019.
-
Observation of aerodynamic instability in the flow of a particle stream in a dilute gas
Authors:
Holly L. Capelo,
Jan Molacek,
Michiel Lambrechts,
John Lawson,
Anders Johansen,
Jurgen Blum,
Eberhard Bodenschatz,
Haitao Xu
Abstract:
Forming macroscopic solid bodies in circumstellar discs requires local dust concentration levels significantly higher than the mean. Interactions of the dust particles with the gas must serve to augment local particle densities, and facilitate growth past barriers in the metre size range. Amongst a number of mechanisms that can amplify the local density of solids, aerodynamic streaming instability…
▽ More
Forming macroscopic solid bodies in circumstellar discs requires local dust concentration levels significantly higher than the mean. Interactions of the dust particles with the gas must serve to augment local particle densities, and facilitate growth past barriers in the metre size range. Amongst a number of mechanisms that can amplify the local density of solids, aerodynamic streaming instability (SI) is one of the most promising. This work tests the physical assumptions of models that lead to SI in protoplanetary disks (PPDs). We conduct laboratory experiments in which we track the three-dimensional motion of spherical solid particles fluidized in a low-pressure, laminar, incompressible, gas stream. The particle sizes span the Stokes-Epstein drag regime transition and the overall dust-to-gas mass density ratio is close to unity. Lambrechts et al. (2016) established the similarity of the laboratory flow to a simplified PPD model flow. We obtain experimental results suggesting an instability due to particle-gas interaction: i) there exist variations in particle concentration in the direction of the mean drag forces; ii) the particles have a tendency to 'catch up' to one another when they are in proximity; iii) particle clumping occurs on very small scales, which implies local enhancements above the background dust-to-gas mass density ratio by factors of several tens; v) the presence of these density enhancements occurs for a mean dust-to-gas mass density ratio approaching or greater than 1; v) we find evidence for collective particle drag reduction when the local particle number density becomes high and when the background gas pressure is high so that the drag is in the continuum regime. The experiments presented here are precedent-setting for observing SI under controlled conditions and may lead to a deeper understanding of how it operates in nature.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Experiments on cometary activity: ejection of dust aggregates from a sublimating water-ice surface
Authors:
D. Bischoff,
B. Gundlach,
M. Neuhaus,
J. Blum
Abstract:
The gas-driven dust activity of comets is still an unresolved question in cometary science. In the past, it was believed that comets are dirty snowballs and that the dust is ejected when the ice retreats. However, thanks to the various space missions to comets, it has become evident that comets have a much higher dust-to-ice ratio than previously thought and that most of the dust mass is ejected i…
▽ More
The gas-driven dust activity of comets is still an unresolved question in cometary science. In the past, it was believed that comets are dirty snowballs and that the dust is ejected when the ice retreats. However, thanks to the various space missions to comets, it has become evident that comets have a much higher dust-to-ice ratio than previously thought and that most of the dust mass is ejected in large particles. Here we report on new comet-simulation experiments dedicated to the study of the ejection of dust aggregates caused by the sublimation of solid water ice. We find that dust ejection exactly occurs when the pressure of the water vapor above the ice surface exceeds the tensile strength plus the gravitational load of the covering dust layer. Furthermore, we observed the ejection of clusters of dust aggregates, whose sizes increase with increasing thickness of the ice-covering dust-aggregate layer. In addition, the trajectories of the ejected aggregates suggest that most of the aggregates obtained a non-vanishing initial velocity from the ejection event.
△ Less
Submitted 23 November, 2018;
originally announced November 2018.
-
Impact-induced energy transfer and dissipation in granular clusters under microgravity conditions
Authors:
Hiroaki Katsuragi,
Jürgen Blum
Abstract:
The impact-induced energy transfer and dissipation in granular targets without any confining walls are studied by microgravity experiments. A solid projectile impacts into a granular target at low impact speed ($0.045 \leq v_p \leq 1.6$~m~s$^{-1}$) in a laboratory drop tower. Granular clusters consisting of soft or hard particles are used as targets. Porous dust agglomerates and glass beads are us…
▽ More
The impact-induced energy transfer and dissipation in granular targets without any confining walls are studied by microgravity experiments. A solid projectile impacts into a granular target at low impact speed ($0.045 \leq v_p \leq 1.6$~m~s$^{-1}$) in a laboratory drop tower. Granular clusters consisting of soft or hard particles are used as targets. Porous dust agglomerates and glass beads are used for soft and hard particles, respectively. The expansion of the granular target cluster is recorded by a high-speed camera. Using the experimental data, we find that (i)~a simple energy scaling can explain the energy transfer in both, soft- and hard-particles granular targets, (ii)~the kinetic impact energy is isotropically transferred to the target from the impact point, and (iii)~the transferred kinetic energy is $2$~-~$7$\% of the projectile's initial kinetic energy. The dissipative-diffusion model of energy transfer can quantitatively explain these behaviors.
△ Less
Submitted 13 November, 2018; v1 submitted 25 October, 2018;
originally announced October 2018.
-
Thermal Alteration of Labile Elements in Carbonaceous Chondrites
Authors:
Alessondra Springmann,
Dante S. Lauretta,
Bjoern Klaue,
Yulia S. Goreva,
Joel D. Blum,
Alexandre Andronikov,
Jordan K. Steckloff
Abstract:
Carbonaceous chondrite meteorites are some of the oldest Solar System planetary materials available for study. The CI group has bulk abundances of elements similar to those of the solar photosphere. Of particular interest in carbonaceous chondrite compositions are labile elements, which vaporize and mobilize efficiently during post-accretionary parent-body heating events. Thus, they can record low…
▽ More
Carbonaceous chondrite meteorites are some of the oldest Solar System planetary materials available for study. The CI group has bulk abundances of elements similar to those of the solar photosphere. Of particular interest in carbonaceous chondrite compositions are labile elements, which vaporize and mobilize efficiently during post-accretionary parent-body heating events. Thus, they can record low-temperature alteration events throughout asteroid evolution. However, the precise nature of labile-element mobilization in planetary materials is unknown. Here we characterize the thermally induced movements of the labile elements S, As, Se, Te, Cd, Sb, and Hg in carbonaceous chondrites by conducting experimental simulations of volatile-element mobilization during thermal metamorphism. This process results in appreciable loss of some elements at temperatures as low as 500 K. This work builds on previous laboratory heating experiments on primitive meteorites and shows the sensitivity of chondrite compositions to excursions in temperature. Elements such as S and Hg have the most active response to temperature across different meteorite groups. Labile element mobilization in primitive meteorites is essential for quantifying elemental fractionation that occurred on asteroids early in Solar System history. This work is relevant to maintaining a pristine sample from asteroid (101955) Bennu from the OSIRIS-REx mission and constraining the past orbital history of Bennu. Additionally, we discuss thermal effects on surface processes of near-Earth asteroids, including the thermal history of "rock comets" such as (3200) Phaethon. This work is also critical for constraining the concentrations of contaminants in vaporized water extracted from asteroid regolith as part of future in situ resource utilization for sustained robotic and human space exploration.
△ Less
Submitted 7 December, 2018; v1 submitted 9 October, 2018;
originally announced October 2018.
-
The optical characteristics of the dust of sungrazing comet C/2012 S1 (ISON) observed at large heliocentric distances
Authors:
Oleksandra Ivanova,
Volodymyr Reshetnyk,
Yury Skorov,
Jürgen Blum,
Zuzana Seman Krišandová,
Jan Svoreň,
Pavlo Korsun,
Viktor Afanasiev,
Igor Luk'yanyk,
Maxim Andreev
Abstract:
We present an analysis of the photometric and spectroscopic data of the comet C/2012 S1 (ISON) observed at the heliocentric distances of 6.21÷4.81 AU. The photometric observations were made with the 60-cm Zeiss-600 telescope (ICAMER, peak Terskol, Russia) and the spectroscopic observations were performed using the SCORPIO-2 focal reducer mounted in the prime focus of the 6-m BTA telescope (SAO RAS…
▽ More
We present an analysis of the photometric and spectroscopic data of the comet C/2012 S1 (ISON) observed at the heliocentric distances of 6.21÷4.81 AU. The photometric observations were made with the 60-cm Zeiss-600 telescope (ICAMER, peak Terskol, Russia) and the spectroscopic observations were performed using the SCORPIO-2 focal reducer mounted in the prime focus of the 6-m BTA telescope (SAO RAS, Russia). We analyse the B, V and R-band images to describe the dusty cometary coma and to investigate its brightness, colours and dust production rate. The spectra cover the wavelength range of 3600÷7070 Å. No emissions which are expected in this wavelength region were detected above the 3$σ$ level. The continuum shows a reddening effect with the normalized gradient of reflectivity along dispersion of (9.3$\pm$1.1)% per 1000 Å. A dust-loss rate was derived using the obtained values and under the different model assumptions. Our simulations clearly indicate that to retrieve dust production from the observational Af$ρ$ parameter is an ambiguous task. The result of such a procedure is strongly dependent on dynamical (e.g. effective density and cross-section) as well as optical (e.g. scattering coefficient and phase function) characteristics of dust grains. A variation of the mentioned parameters can lead to dramatic changes in the evaluation of mass production. We demonstrate that the dynamic and optical properties are interconnected via the microscopic properties of dust grains (effective size and porosity).
△ Less
Submitted 13 June, 2018; v1 submitted 17 May, 2018;
originally announced May 2018.
-
Asteroid Ryugu Before the Hayabusa2 Encounter
Authors:
Koji Wada,
Matthias Grott,
Patrick Michel,
Kevin J. Walsh,
Antonella M. Barucci,
Jens Biele,
Jürgen Blum,
Carolyn M. Ernst,
Jan T. Grundmann,
Bastian Gundlach,
Axel Hagermann,
Maximilian Hamm,
Martin Jutzi,
Myung-Jin Kim,
Ekkehard Kührt,
Lucille Le Corre,
Guy Libourel,
Roy Lichtenheldt,
Alessandro Maturilli,
Scott R. Messenger,
Tatsuhiro Michikami,
Hideaki Miyamoto,
Stefano Mottola,
Akiko M. Nakamura,
Thomas Müller
, et al. (9 additional authors not shown)
Abstract:
Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical…
▽ More
Asteroid (162173) Ryugu is the target object of Hayabusa2, an asteroid exploration and sample return mission led by Japan Aerospace Exploration Agency (JAXA). Ground-based observations indicate that Ryugu is a C-type near-Earth asteroid with a diameter of less than 1 km, but the knowledge of its detailed properties is still very limited. This paper summarizes our best understanding of the physical and dynamical properties of Ryugu based on remote sensing and theoretical modeling. This information is used to construct a design reference model of the asteroid that is used for formulation of mission operations plans in advance of asteroid arrival. Particular attention is given to the surface properties of Ryugu that are relevant to sample acquisition. This reference model helps readers to appropriately interpret the data that will be directly obtained by Hayabusa2 and promotes scientific studies not only for Ryugu itself and other small bodies but also for the Solar System evolution that small bodies shed light on.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Dust evolution in protoplanetary discs and the formation of planetesimals. What have we learned from laboratory experiments?
Authors:
Jürgen Blum
Abstract:
After 25 years of laboratory research on protoplanetary dust agglomeration, a consistent picture of the various processes that involve colliding dust aggregates has emerged. Besides sticking, bouncing and fragmentation, other effects, like, e.g., erosion or mass transfer, have now been extensively studied. Coagulation simulations consistently show that $\rm μ$m-sized dust grains can grow to mm- to…
▽ More
After 25 years of laboratory research on protoplanetary dust agglomeration, a consistent picture of the various processes that involve colliding dust aggregates has emerged. Besides sticking, bouncing and fragmentation, other effects, like, e.g., erosion or mass transfer, have now been extensively studied. Coagulation simulations consistently show that $\rm μ$m-sized dust grains can grow to mm- to cm-sized aggregates before they encounter the bouncing barrier, whereas sub-$\rm μ$m-sized water-ice particles can directly grow to planetesimal sizes. For siliceous materials, other processes have to be responsible for turning the dust aggregates into planetesimals. In this article, these processes are discussed, the physical properties of the emerging dusty or icy planetesimals are presented and compared to empirical evidence from within and without the Solar System. In conclusion, the formation of planetesimals by a gravitational collapse of dust "pebbles" seems the most likely.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
The physics of protoplanetesimal dust agglomerates. X. High-velocity collisions between small and large dust agglomerates as growth barrier
Authors:
Rainer Schräpler,
Jürgen Blum,
Sebastiaan Krijt,
Jan-Hendrik Raabe
Abstract:
In a protoplanetary disk, dust aggregates in the $μ$m to mm size range possess mean collision velocities of 10 to 60 ms$^{-1}$ with respect to dm- to m-size bodies. We performed laboratory collision experiments to explore this parameter regime and found a size- and velocity-dependent threshold between erosion and growth. By using a local Monte Carlo coagulation calculation and complementary a simp…
▽ More
In a protoplanetary disk, dust aggregates in the $μ$m to mm size range possess mean collision velocities of 10 to 60 ms$^{-1}$ with respect to dm- to m-size bodies. We performed laboratory collision experiments to explore this parameter regime and found a size- and velocity-dependent threshold between erosion and growth. By using a local Monte Carlo coagulation calculation and complementary a simple semi-analytical timescale approach, we show that erosion considerably limits particle growth in protoplanetary disks and leads to a steady-state dust-size distribution from $μ$m to dm sized particles.
△ Less
Submitted 16 January, 2018; v1 submitted 12 December, 2017;
originally announced December 2017.
-
Debris Disc Constraints on Planetesimal Formation
Authors:
Alexander V. Krivov,
Aljoscha Ide,
Torsten Löhne,
Anders Johansen,
Jürgen Blum
Abstract:
Two basic routes for planetesimal formation have been proposed over the last few decades. One is a classical "slow-growth" scenario. Another one is particle concentration models, in which small pebbles are concentrated locally and then collapse gravitationally to form planetesimals. Both types of models make certain predictions for the size spectrum and internal structure of newly-born planetesima…
▽ More
Two basic routes for planetesimal formation have been proposed over the last few decades. One is a classical "slow-growth" scenario. Another one is particle concentration models, in which small pebbles are concentrated locally and then collapse gravitationally to form planetesimals. Both types of models make certain predictions for the size spectrum and internal structure of newly-born planetesimals. We use these predictions as input to simulate collisional evolution of debris discs left after the gas dispersal. The debris disc emission as a function of a system's age computed in these simulations is compared with several Spitzer and Herschel debris disc surveys around A-type stars. We confirm that the observed brightness evolution for the majority of discs can be reproduced by classical models. Further, we find that it is equally consistent with the size distribution of planetesimals predicted by particle concentration models - provided the objects are loosely bound "pebble piles" as these models also predict. Regardless of the assumed planetesimal formation mechanism, explaining the brightest debris discs in the samples uncovers a "disc mass problem." To reproduce such discs by collisional simulations, a total mass of planetesimals of up to ~1000 Earth masses is required, which exceeds the total mass of solids available in the protoplanetary progenitors of debris discs. This may indicate that stirring was delayed in some of the bright discs, that giant impacts occurred recently in some of them, that some systems may be younger than previously thought, or that non-collisional processes contribute significantly to the dust production.
△ Less
Submitted 18 December, 2017; v1 submitted 9 November, 2017;
originally announced November 2017.
-
Evidence for the formation of comet 67P/Churyumov-Gerasimenko through gravitational collapse of a bound clump of pebbles
Authors:
Jürgen Blum,
Bastian Gundlach,
Maya Krause,
Marco Fulle,
Anders Johansen,
Jessica Agarwal,
Ingo von Borstel,
Xian Shi,
Xuanyu Hu,
Mark S. Bentley,
Fabrizio Capaccioni,
Luigi Colangeli,
Vincenzo Della Corte,
Nicolas Fougere,
Simon F. Green,
Stavro Ivanovski,
Thurid Mannel,
Sihane Merouane,
Alessandra Migliorini,
Alessandra Rotundi,
Roland Schmied,
Colin Snodgrass
Abstract:
The processes that led to the formation of the planetary bodies in the Solar System are still not fully understood. Using the results obtained with the comprehensive suite of instruments on-board ESA's Rosetta mission, we present evidence that comet 67P/Churyumov-Gerasimenko likely formed through the gentle gravitational collapse of a bound clump of mm-sized dust aggregates ("pebbles"), intermixed…
▽ More
The processes that led to the formation of the planetary bodies in the Solar System are still not fully understood. Using the results obtained with the comprehensive suite of instruments on-board ESA's Rosetta mission, we present evidence that comet 67P/Churyumov-Gerasimenko likely formed through the gentle gravitational collapse of a bound clump of mm-sized dust aggregates ("pebbles"), intermixed with microscopic ice particles. This formation scenario leads to a cometary make-up that is simultaneously compatible with the global porosity, homogeneity, tensile strength, thermal inertia, vertical temperature profiles, sizes and porosities of emitted dust, and the steep increase in water-vapour production rate with decreasing heliocentric distance, measured by the instruments on-board the Rosetta spacecraft and the Philae lander. Our findings suggest that the pebbles observed to be abundant in protoplanetary discs around young stars provide the building material for comets and other minor bodies.
△ Less
Submitted 21 October, 2017;
originally announced October 2017.
-
Micrometer-Sized Water Ice Particles for Planetary Science Experiments: Influence of Surface Structure on Collisional Properties
Authors:
Sabrina Gärtner,
Bastian Gundlach,
Thomas F. Headen,
Judy Ratte,
Joachim Oesert,
Stanislav N. Gorb,
Tristan G. A. Youngs,
Daniel T. Bowron,
Jürgen Blum,
Helen J. Fraser
Abstract:
Models and observations suggest that ice-particle aggregation at and beyond the snowline dominates the earliest stages of planet-formation, which therefore is subject to many laboratory studies. However, the pressure-temperature gradients in proto-planetary disks mean that the ices are constantly processed, undergoing phase changes between different solid phases and the gas phase. Open questions r…
▽ More
Models and observations suggest that ice-particle aggregation at and beyond the snowline dominates the earliest stages of planet-formation, which therefore is subject to many laboratory studies. However, the pressure-temperature gradients in proto-planetary disks mean that the ices are constantly processed, undergoing phase changes between different solid phases and the gas phase. Open questions remain as to whether the properties of the icy particles themselves dictate collision outcomes and therefore how effectively collision experiments reproduce conditions in pro- toplanetary environments. Previous experiments often yielded apparently contradictory results on collision outcomes, only agreeing in a temperature dependence setting in above $\approx$ 210 K. By exploiting the unique capabilities of the NIMROD neutron scattering instrument, we characterized the bulk and surface structure of icy particles used in collision experiments, and studied how these structures alter as a function of temperature at a constant pressure of around 30 mbar. Our icy grains, formed under liquid nitrogen, undergo changes in the crystalline ice-phase, sublimation, sintering and surface pre-melting as they are heated from 103 to 247 K. An increase in the thickness of the diffuse surface layer from $\approx$ 10 to $\approx$ 30 Å ($\approx$ 2.5 to 12 bilayers) proves increased molecular mobility at temperatures above $\approx$ 210 K. As none of the other changes tie-in with the temperature trends in collisional outcomes, we conclude that the surface pre-melting phenomenon plays a key role in collision experiments at these temperatures. Consequently, the pressure-temperature environment, may have a larger influence on collision outcomes than previously thought.
△ Less
Submitted 6 October, 2017; v1 submitted 5 October, 2017;
originally announced October 2017.
-
The Physics of Protoplanetesimal Dust Agglomerates. X. Mechanical properties of dust aggregates probed by a solid-projectile impact
Authors:
H. Katsuragi,
J. Blum
Abstract:
Dynamic characterization of mechanical properties of dust aggregates has been one of the most important problems to quantitatively discuss the dust growth in protoplanetary disks. We experimentally investigate the dynamic properties of dust aggregates by low-speed ($\lesssim 3.2$ m s$^{-1}$) impacts of solid projectiles. Spherical impactors made of glass, steel, or lead are dropped onto a dust agg…
▽ More
Dynamic characterization of mechanical properties of dust aggregates has been one of the most important problems to quantitatively discuss the dust growth in protoplanetary disks. We experimentally investigate the dynamic properties of dust aggregates by low-speed ($\lesssim 3.2$ m s$^{-1}$) impacts of solid projectiles. Spherical impactors made of glass, steel, or lead are dropped onto a dust aggregate of packing fraction $φ=0.35$ under vacuum conditions. The impact results in cratering or fragmentation of the dust aggregate, depending on the impact energy. The crater shape can be approximated by a spherical segment and no ejecta are observed. To understand the underlying physics of impacts into dust aggregates, the motion of the solid projectile is acquired by a high-speed camera. Using the obtained position data of the impactor, we analyze the drag-force law and dynamic pressure induced by the impact. We find that there are two characteristic strengths. One is defined by the ratio between impact energy and crater volume and is $\simeq 120$ kPa. The other strength indicates the fragmentation threshold of dynamic pressure and is $\simeq 10$ kPa. The former characterizes the apparent plastic deformation and is consistent with the drag force responsible for impactor deceleration. The latter corresponds to the dynamic tensile strength to create cracks. Using these results, a simple model for the compaction and fragmentation threshold of dust aggregates is proposed. In addition, the comparison of drag-force laws for dust aggregates and loose granular matter reveals the similarities and differences between the two materials.
△ Less
Submitted 26 October, 2017; v1 submitted 10 September, 2017;
originally announced September 2017.
-
Detection of magnetized quark-nuggets, a candidate for dark matter
Authors:
J. Pace VanDevender,
Aaron P. VanDevender,
T. Sloan,
Criss Swaim,
Peter Wilson,
Robert. G. Schmitt,
Rinat Zakirov,
Josh Blum,
James L. Cross Sr.,
Niall McGinley
Abstract:
Quark nuggets are theoretical objects composed of approximately equal numbers of up, down, and strange quarks and are also called strangelets and nuclearites. They have been proposed as a candidate for dark matter, which constitutes about 85% of the universe's mass and which has been a mystery for decades. Previous efforts to detect quark nuggets assumed that the nuclear-density core interacts dir…
▽ More
Quark nuggets are theoretical objects composed of approximately equal numbers of up, down, and strange quarks and are also called strangelets and nuclearites. They have been proposed as a candidate for dark matter, which constitutes about 85% of the universe's mass and which has been a mystery for decades. Previous efforts to detect quark nuggets assumed that the nuclear-density core interacts directly with the surrounding matter so the stopping power is minimal. Tatsumi found that quark nuggets could well exist as a ferromagnetic liquid with an approximately 10 trillion Tesla magnetic field. We find that the magnetic field produces a magnetopause with surrounding plasma, as the earth's magnetic field produces a magnetopause with the solar wind, and substantially increases their energy deposition rate in matter. We use the magnetopause model to compute the energy deposition as a function of quark-nugget mass and to analyze testing the quark-nugget hypothesis for dark matter by observations in the air, water, and land. We conclude the water option is most promising.
△ Less
Submitted 29 September, 2020; v1 submitted 22 August, 2017;
originally announced August 2017.
-
Low-velocity collision behaviour of clusters composed of sub-mm sized dust aggregates
Authors:
J. Brisset,
D. Heißelmann,
S. Kothe,
R. Weidling,
J. Blum
Abstract:
The experiments presented aim to measure the outcome of collisions between sub-mm sized protoplanetary dust aggregate analogues. We also observed the clusters formed from these aggregates and their collision behaviour. The experiments were performed at the drop tower in Bremen. The protoplanetary dust analogue materials were micrometre-sized monodisperse and polydisperse SiO$_2$ particles prepared…
▽ More
The experiments presented aim to measure the outcome of collisions between sub-mm sized protoplanetary dust aggregate analogues. We also observed the clusters formed from these aggregates and their collision behaviour. The experiments were performed at the drop tower in Bremen. The protoplanetary dust analogue materials were micrometre-sized monodisperse and polydisperse SiO$_2$ particles prepared into aggregates with sizes between 120~$μ$m and 250~$μ$m. One of the dust samples contained aggregates that were previously compacted through repeated bouncing. During three flights of 9~s of microgravity each, individual collisions between aggregates and the formation of clusters of up to a few millimetres in size were observed. In addition, the collisions of clusters with the experiment cell walls leading to compaction or fragmentation were recorded. We observed collisions amongst dust aggregates and collisions between dust clusters and the cell aluminium walls at speeds ranging from about 0.1 cm/s to 20 cm/s. The velocities at which sticking occurred ranged from 0.18 to 5.0 cm/s for aggregates composed of monodisperse dust, with an average value of 2.1 cm/s for reduced masses ranging from 1.2x10-6 to 1.8x10-3 g with an average value of 2.2x10-4 g. From the restructuring and fragmentation of clusters composed of dust aggregates colliding with the aluminium cell walls, we derived a collision recipe for dust aggregates ($\sim$100 $μ$m) following the model of Dominik \& Thielens (1997) developed for microscopic particles. We measured a critical rolling energy of 1.8x10-13 J and a critical breaking energy of 3.5x10-13 J for 100 $μ$m-sized non-compacted aggregates.
△ Less
Submitted 22 June, 2017;
originally announced June 2017.
-
Submillimetre-sized dust aggregate collision and growth properties
Authors:
J. Brisset,
D. Heißelmann,
S. Kothe,
R. Weidling,
J. Blum
Abstract:
The collisional and sticking properties of sub-mm-sized aggregates composed of protoplanetary dust analogue material are measured, including the statistical threshold velocity between sticking and bouncing, their surface energy and tensile strength within aggregate clusters. We performed an experiment on the REXUS 12 suborbital rocket. The protoplanetary dust analogue materials were micrometre-siz…
▽ More
The collisional and sticking properties of sub-mm-sized aggregates composed of protoplanetary dust analogue material are measured, including the statistical threshold velocity between sticking and bouncing, their surface energy and tensile strength within aggregate clusters. We performed an experiment on the REXUS 12 suborbital rocket. The protoplanetary dust analogue materials were micrometre-sized monodisperse and polydisperse SiO2 particles prepared into aggregates with sizes around 120 $μ$m and 330 $μ$m, respectively and volume filling factors around 0.37. During the experimental run of 150 s under reduced gravity conditions, the sticking of aggregates and the formation and fragmentation of clusters of up to a few millimetres in size was observed. The sticking probability of the sub-mm-sized dust aggregates could be derived for velocities decreasing from 22 to 3 cm/s. The transition from bouncing to sticking collisions happened at 12.7 cm/s for the smaller aggregates composed of monodisperse particles and at 11.5 and 11.7 cm/s for the larger aggregates composed of mono- and polydisperse dust particles, respectively. Using the pull-off force of sub-mm-sized dust aggregates from the clusters, the surface energy of the aggregates composed of monodisperse dust was derived to be 1.6x10-5 J/m2, which can be scaled down to 1.7x10-2 J/m2 for the micrometre-sized monomer particles and is in good agreement with previous measurements for silica particles. The tensile strengths of these aggregates within the clusters were derived to be 1.9 Pa and 1.6 Pa for the small and large dust aggregates, respectively. These values are in good agreement with recent tensile strength measurements for mm-sized silica aggregates. Using our data on the sticking-bouncing threshold, estimates of the maximum aggregate size can be given. For a minimum mass solar nebula model, aggregates can reach sizes of 1 cm.
△ Less
Submitted 22 June, 2017;
originally announced June 2017.
-
The footprint of cometary dust analogs: I. Laboratory experiments of low-velocity impacts and comparison with Rosetta data
Authors:
L. E. Ellerbroek,
B. Gundlach,
A. Landeck,
C. Dominik,
J. Blum,
S. Merouane,
M. Hilchenbach,
M. S. Bentley,
T. Mannel,
H. John,
H. A. van Veen
Abstract:
Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have bee…
▽ More
Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have been modified during their collection by the spacecraft instruments. Here we present the results of laboratory experiments that simulate the impact of dust on the collection surfaces of COSIMA and MIDAS, instruments onboard the Rosetta spacecraft. We map the size and structure of the footprints left by the dust particles as a function of their initial size (up to several hundred um) and velocity (up to 6 m/s). We find that in most collisions, only part of the dust particle is left on the target; velocity is the main driver of the appearance of these deposits. A boundary between sticking/bouncing and fragmentation as an outcome of the particle-target collision is found at v ~ 2 m/s. For velocities below this value, particles either stick and leave a single deposit on the target plate, or bounce, leaving a shallow footprint of monomers. At velocities > 2 m/s and sizes > 80 um, particles fragment upon collision, transferring up to 50 per cent of their mass in a rubble-pile-like deposit on the target plate. The amount of mass transferred increases with the impact velocity. The morphologies of the deposits are qualitatively similar to those found by the COSIMA instrument.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
Nanoindenting the Chelyabinsk meteorite to learn about impact deflection effects in asteroids
Authors:
Carles E. Moyano-Cambero,
Eva Pellicer,
Josep M. Trigo-Rodríguez,
Iwan P. Williams,
Jürgen Blum,
Patrick Michel,
Michael Küppers,
Marina Martínez-Jiménez,
Ivan Lloro,
Jordi Sort
Abstract:
The Chelyabinsk meteorite is a highly shocked, low porosity, ordinary chondrite, probably similar to S- or Q-type asteroids. Therefore, nanoindentation experiments on this meteorite allow us to obtain key data to understand the physical properties of near-Earth asteroids. Tests at different length scales provide information about the local mechanical properties of the minerals forming this meteori…
▽ More
The Chelyabinsk meteorite is a highly shocked, low porosity, ordinary chondrite, probably similar to S- or Q-type asteroids. Therefore, nanoindentation experiments on this meteorite allow us to obtain key data to understand the physical properties of near-Earth asteroids. Tests at different length scales provide information about the local mechanical properties of the minerals forming this meteorite: reduced Young's modulus, hardness, elastic recovery, and fracture toughness. Those tests are also useful to understand the potential to deflect threatening asteroids using a kinetic projectile. We found that the differences in mechanical properties between regions of the meteorite, which increase or reduce the efficiency of impacts, are not a result of compositional differences. A low mean particle size, attributed to repetitive shock, can increase hardness, while low porosity promotes a higher momentum multiplication. Momentum multiplication is the ratio between the change in momentum of a target due to an impact, and the momentum of the projectile, and, therefore higher values imply more efficient impacts. In the Chelyabinsk meteorite, the properties of the light-colored lithology materials facilitate obtaining higher momentum multiplication values, compared to the other regions described for this meteorite. Also, we found a low value of fracture toughness in the shock-melt veins of Chelyabinsk, which would promote the ejection of material after an impact and, therefore, increase the momentum multiplication. These results are relevant considering the growing interest in missions to test asteroid deflection, such as the recent collaboration between the European Space Agency and NASA, known as the Asteroid Impact and Deflection Assessment mission.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
The role of pebble fragmentation in planetesimal formation II. Numerical simulations
Authors:
Karl Wahlberg Jansson,
Anders Johansen,
Mohtashim Bukhari Syed,
Jürgen Blum
Abstract:
Some scenarios for planetesimal formation go through a phase of collapse of gravitationally bound clouds of mm-cm-sized pebbles. Such clouds can form for example through the streaming instability in protoplanetary disks. We model the collapse process with a statistical model to obtain the internal structure of planetesimals with solid radii between 10 and 1,000 km. In the collapse, pebbles collide…
▽ More
Some scenarios for planetesimal formation go through a phase of collapse of gravitationally bound clouds of mm-cm-sized pebbles. Such clouds can form for example through the streaming instability in protoplanetary disks. We model the collapse process with a statistical model to obtain the internal structure of planetesimals with solid radii between 10 and 1,000 km. In the collapse, pebbles collide and, depending on relative speed, collisions have different outcomes. A mixture of particle sizes inside a planetesimal leads to better packing capabilities and higher densities. In this paper we apply results from new laboratory experiments of dust aggregate collisions (presented in a companion paper) to model collision outcomes. We find that the internal structure of a planetesimal is strongly dependent on both its mass and the applied fragmentation model. Low-mass planetesimals have no/few fragmenting pebble collisions in the collapse phase and end up as porous pebble-piles. The amount of fragmenting collisions increases with increasing cloud mass, resulting in wider particle size distributions and higher density. The collapse is nevertheless "cold" in the sense that collision speeds are damped by the high collision frequency. This ensures that a significant fraction of large pebbles survive the collapse in all but the most massive clouds. Our results are in broad agreement with the observed increase in density of Kuiper belt objects with increasing size as exemplified by the recent characterization of the highly porous comet 67P/Churyumov-Gerasimenko.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
The role of pebble fragmentation in planetesimal formation I. Experimental study
Authors:
M. Bukhari Syed,
J. Blum,
K. Wahlberg Jansson,
A. Johansen
Abstract:
Previous work on protoplanetary dust growth shows halt at centimeter sizes owing to the occurrence of bouncing at velocities of $\geq$ 0.1 $ms^{-1}$ and fragmentation at velocities $\geq$ 1 $ms^{-1}$. To overcome these barriers, spatial concentration of cm-sized dust pebbles and subsequent gravitational collapse have been proposed. However, numerical investigations have shown that dust aggregates…
▽ More
Previous work on protoplanetary dust growth shows halt at centimeter sizes owing to the occurrence of bouncing at velocities of $\geq$ 0.1 $ms^{-1}$ and fragmentation at velocities $\geq$ 1 $ms^{-1}$. To overcome these barriers, spatial concentration of cm-sized dust pebbles and subsequent gravitational collapse have been proposed. However, numerical investigations have shown that dust aggregates may undergo fragmentation during the gravitational collapse phase. This fragmentation in turn changes the size distribution of the solids and thus must be taken into account in order to understand the properties of the planetesimals that form. To explore the fate of dust pebbles undergoing fragmenting collisions, we conducted laboratory experiments on dust-aggregate collisions with a focus on establishing a collision model for this stage of planetesimal formation. In our experiments, we analysed collisions of dust aggregates with masses between 1.4 g and 180 g, mass ratios between target and projectile from 125 to 1 at a fixed porosity of 65%, within the velocity range of 1.5 $-$ 8.7 $ms^{-1}$ , at low atmospheric pressure of $\sim 10^{-3}$ mbar and in free-fall conditions. We derived the mass of the largest fragment, the fragment size/mass distribution, and the efficiency of mass transfer as a function of collision velocity and projectile/target aggregate size. Moreover, we give recipes for an easy-to-use fragmentation and mass-transfer model for further use in modeling work. In a companion paper, we utilize the experimental findings and the derived dust-aggregate collision model to investigate the fate of dust pebbles during gravitational collapse.
△ Less
Submitted 22 September, 2016;
originally announced September 2016.
-
Acceleration of cometary dust near the nucleus: Application to 67P/Churyumov-Gerasimenko
Authors:
Yuri Skorov,
Volodymyr Reshetnyk,
Pedro Lacerda,
Paul Hartogh,
Juergen Blum
Abstract:
We present a model of cometary dust capable of simulating the dynamics within the first few tens of km of the comet surface. Recent measurements by the GIADA and COSIMA instruments on Rosetta show that the nucleus emits fluffy dust particles with porosities above 50% and sizes up to at least mm (Schulz et al. 2015, Rotundi et al. 2015, Fulle et al. 2015). Retrieval of the physical properties of th…
▽ More
We present a model of cometary dust capable of simulating the dynamics within the first few tens of km of the comet surface. Recent measurements by the GIADA and COSIMA instruments on Rosetta show that the nucleus emits fluffy dust particles with porosities above 50% and sizes up to at least mm (Schulz et al. 2015, Rotundi et al. 2015, Fulle et al. 2015). Retrieval of the physical properties of these particles requires a model of the effective forces governing their dynamics. Here, we present a model capable of simulating realistic, large and porous particles using hierarchical aggregates, which shows previous extrapolations to be inadequate. The main strengths of our approach are that we can simulate very large (mm-scale) non-spherical agglomerates and can accurately determine their 1) effective cross-section and ratio of cross-section to mass, 2) gas drag coefficient, and 3) light scattering properties. In practical terms, we find that a more detailed treatment of the dust structure results in 3-5 times higher velocities for large dust particles in the inner coma than previously estimated using spherical particles of the same mass. We apply our model to the dynamics of dust in the vicinity of the nucleus of comet 67P and successfully reproduce the dust speeds reported early on when the comet was roughly 3.5 AU from the Sun. At this stage, we employ a simple spherical comet nucleus, we model activity as constant velocity gas expansion from a uniformly active surface, and use Mie scattering. We discuss pathways to improve on these simplifications in the future.
△ Less
Submitted 27 June, 2016;
originally announced June 2016.
-
The collisional evolution of undifferentiated asteroids and the formation of chondritic meteoroids
Authors:
Eike Beitz,
Jürgen Blum,
M. Gabriela Parisi,
Josep M. Trigo-Rodríguez
Abstract:
Most meteorites are fragments from recent collisions experienced in the asteroid belt. In such a hyper-velocity collision, the smaller collision partner is destroyed, whereas a crater on the asteroid is formed or it is entirely disrupted, too. The present size distribution of the asteroid belt suggests that an asteroid with 100 km radius is encountered $10^{14}$ times during the lifetime of the So…
▽ More
Most meteorites are fragments from recent collisions experienced in the asteroid belt. In such a hyper-velocity collision, the smaller collision partner is destroyed, whereas a crater on the asteroid is formed or it is entirely disrupted, too. The present size distribution of the asteroid belt suggests that an asteroid with 100 km radius is encountered $10^{14}$ times during the lifetime of the Solar System by objects larger than 10 cm in radius; the formed craters cover the surface of the asteroid about 100 times. We present a Monte Carlo code that takes into account the statistical bombardment of individual infinitesimally small surface elements, the subsequent compaction of the underlying material, the formation of a crater and a regolith layer. For the entire asteroid, 10,000 individual surface elements are calculated. We compare the ejected material from the calculated craters with the shock stage of meteorites with low petrologic type and find that these most likely stem from smaller parent bodies that do not possess a significant regolith layer. For larger objects, which accrete a regolith layer, a prediction of the thickness depending on the largest visible crater can be made. Additionally, we compare the crater distribution of an object initially 100 km in radius with the shape model of the asteroid (21) Lutetia, assuming it to be initially formed spherical with a radius that is equal to its longest present ellipsoid length. Here, we find the shapes of both objects to show resemblance to each other.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.