-
Ultra-Stable Environment Control for the NEID Spectrometer: Design and Performance Demonstration
Authors:
Paul Robertson,
Tyler Anderson,
Gudmundur Stefansson,
Frederick R. Hearty,
Andrew Monson,
Suvrath Mahadevan,
Scott Blakeslee,
Chad Bender,
Joe P. Ninan,
David Conran,
Eric Levi,
Emily Lubar,
Amanda Cole,
Adam Dykhouse,
Shubham Kanodia,
Colin Nitroy,
Joseph Smolsky,
Demetrius Tuggle,
Basil Blank,
Matthew Nelson,
Cullen Blake,
Samuel Halverson,
Chuck Henderson,
Kyle F. Kaplan,
Dan Li
, et al. (8 additional authors not shown)
Abstract:
Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement ins…
▽ More
Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets, and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm/s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermo-mechanically stabilizing the instrument to unprecedented levels. Here, we describe the Environment Control System (ECS) of the NEID Spectrometer, which will be commissioned on the 3.5 m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision < 50 cm/s. Because NEID's optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below $10^{-6}$ Torr and an RMS temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom Temperature Monitoring and Control (TMC) system.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
The Apache Point Observatory Galactic Evolution Experiment (APOGEE) Spectrographs
Authors:
J. C. Wilson,
F. R. Hearty,
M. F. Skrutskie,
S. R. Majewski,
J. A. Holtzman,
D. Eisenstein,
J. Gunn,
B. Blank,
C. Henderson,
S. Smee,
M. Nelson,
D. Nidever,
J. Arns,
R. Barkhouser,
J. Barr,
S. Beland,
M. A. Bershady,
M. R. Blanton,
S. Brunner,
A. Burton,
L. Carey,
M. Carr,
J. P. Colque,
J. Crane,
G. J. Damke
, et al. (64 additional authors not shown)
Abstract:
We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Ga…
▽ More
We describe the design and performance of the near-infrared (1.51--1.70 micron), fiber-fed, multi-object (300 fibers), high resolution (R = lambda/delta lambda ~ 22,500) spectrograph built for the Apache Point Observatory Galactic Evolution Experiment (APOGEE). APOGEE is a survey of ~ 10^5 red giant stars that systematically sampled all Milky Way populations (bulge, disk, and halo) to study the Galaxy's chemical and kinematical history. It was part of the Sloan Digital Sky Survey III (SDSS-III) from 2011 -- 2014 using the 2.5 m Sloan Foundation Telescope at Apache Point Observatory, New Mexico. The APOGEE-2 survey is now using the spectrograph as part of SDSS-IV, as well as a second spectrograph, a close copy of the first, operating at the 2.5 m du Pont Telescope at Las Campanas Observatory in Chile. Although several fiber-fed, multi-object, high resolution spectrographs have been built for visual wavelength spectroscopy, the APOGEE spectrograph is one of the first such instruments built for observations in the near-infrared. The instrument's successful development was enabled by several key innovations, including a "gang connector" to allow simultaneous connections of 300 fibers; hermetically sealed feedthroughs to allow fibers to pass through the cryostat wall continuously; the first cryogenically deployed mosaic volume phase holographic grating; and a large refractive camera that includes mono-crystalline silicon and fused silica elements with diameters as large as ~ 400 mm. This paper contains a comprehensive description of all aspects of the instrument including the fiber system, optics and opto-mechanics, detector arrays, mechanics and cryogenics, instrument control, calibration system, optical performance and stability, lessons learned, and design changes for the second instrument.
△ Less
Submitted 3 February, 2019;
originally announced February 2019.
-
The Wide Integral Field Infrared Spectrograph: Commissioning Results and On-sky Performance
Authors:
Suresh Sivanandam,
Dae-Sik Moon,
R. Elliot Meyer,
Jason Grunhut,
Dennis Zaritsky,
Joshua Eisner,
Ke Ma,
Charles Henderson,
Basil Blank,
Chueh-Yi Chou,
Miranda E. Jarvis,
Stephen Eikenberry,
Moo-Young Chun,
Byeong-Gon Park
Abstract:
We have recently commissioned a novel infrared ($0.9-1.7$ $μ$m) integral field spectrograph (IFS) called the Wide Integral Field Infrared Spectrograph (WIFIS). WIFIS is a unique instrument that offers a very large field-of-view (50$^{\prime\prime}$ x 20$^{\prime\prime}$) on the 2.3-meter Bok telescope at Kitt Peak, USA for seeing-limited observations at moderate spectral resolving power. The measu…
▽ More
We have recently commissioned a novel infrared ($0.9-1.7$ $μ$m) integral field spectrograph (IFS) called the Wide Integral Field Infrared Spectrograph (WIFIS). WIFIS is a unique instrument that offers a very large field-of-view (50$^{\prime\prime}$ x 20$^{\prime\prime}$) on the 2.3-meter Bok telescope at Kitt Peak, USA for seeing-limited observations at moderate spectral resolving power. The measured spatial sampling scale is $\sim1\times1^{\prime\prime}$ and its spectral resolving power is $R\sim2,500$ and $3,000$ in the $zJ$ ($0.9-1.35$ $μ$m) and $H_{short}$ ($1.5-1.7$ $μ$m) modes, respectively. WIFIS's corresponding etendue is larger than existing near-infrared (NIR) IFSes, which are mostly designed to work with adaptive optics systems and therefore have very narrow fields. For this reason, this instrument is specifically suited for studying very extended objects in the near-infrared such as supernovae remnants, galactic star forming regions, and nearby galaxies, which are not easily accessible by other NIR IFSes. This enables scientific programs that were not originally possible, such as detailed surveys of a large number of nearby galaxies or a full accounting of nucleosynthetic yields of Milky Way supernova remnants. WIFIS is also designed to be easily adaptable to be used with larger telescopes. In this paper, we report on the overall performance characteristics of the instrument, which were measured during our commissioning runs in the second half of 2017. We present measurements of spectral resolving power, image quality, instrumental background, and overall efficiency and sensitivity of WIFIS and compare them with our design expectations. Finally, we present a few example observations that demonstrate WIFIS's full capability to carry out infrared imaging spectroscopy of extended objects, which is enabled by our custom data reduction pipeline.
△ Less
Submitted 10 September, 2018;
originally announced September 2018.
-
A Versatile Technique to Enable sub-milli-Kelvin Instrument Stability for Precise Radial Velocity Measurements: Tests with the Habitable-zone Planet Finder
Authors:
Gudmundur Stefansson,
Frederick Hearty,
Paul Robertson,
Suvrath Mahadevan,
Tyler Anderson,
Eric Levi,
Chad Bender,
Matthew Nelson,
Andrew Monson,
Basil Blank,
Samuel Halverson,
Chuck Henderson,
Lawrence Ramsey,
Arpita Roy,
Christian Schwab,
Ryan Terrien
Abstract:
Insufficient instrument thermo-mechanical stability is one of the many roadblocks for achieving 10cm/s Doppler radial velocity (RV) precision, the precision needed to detect Earth-twins orbiting Solar-type stars. Highly temperature and pressure stabilized spectrographs allow us to better calibrate out instrumental drifts, thereby helping in distinguishing instrumental noise from astrophysical stel…
▽ More
Insufficient instrument thermo-mechanical stability is one of the many roadblocks for achieving 10cm/s Doppler radial velocity (RV) precision, the precision needed to detect Earth-twins orbiting Solar-type stars. Highly temperature and pressure stabilized spectrographs allow us to better calibrate out instrumental drifts, thereby helping in distinguishing instrumental noise from astrophysical stellar signals. We present the design and performance of the Environmental Control System (ECS) for the Habitable-zone Planet Finder (HPF), a high-resolution (R=50,000) fiber-fed near infrared (NIR) spectrograph for the 10m Hobby Eberly Telescope at McDonald Observatory. HPF will operate at 180K, driven by the choice of an H2RG NIR detector array with a 1.7micron cutoff. This ECS has demonstrated 0.6mK RMS stability over 15 days at both 180K and 300K, and maintained high quality vacuum (<$10^{-7}$Torr) over months, during long-term stability tests conducted without a planned passive thermal enclosure surrounding the vacuum chamber. This control scheme is versatile and can be applied as a blueprint to stabilize future NIR and optical high precision Doppler instruments over a wide temperature range from ~77K to elevated room temperatures. A similar ECS is being implemented to stabilize NEID, the NASA/NSF NN-EXPLORE spectrograph for the 3.5m WIYN telescope at Kitt Peak, operating at 300K. A full SolidWorks 3D-CAD model and a comprehensive parts list of the HPF ECS are included with this manuscript to facilitate the adaptation of this versatile environmental control scheme in the broader astronomical community.
△ Less
Submitted 19 October, 2016;
originally announced October 2016.
-
The Apache Point Observatory Galactic Evolution Experiment (APOGEE)
Authors:
Steven R. Majewski,
Ricardo P. Schiavon,
Peter M. Frinchaboy,
Carlos Allende Prieto,
Robert Barkhouser,
Dmitry Bizyaev,
Basil Blank,
Sophia Brunner,
Adam Burton,
Ricardo Carrera,
S. Drew Chojnowski,
Katia Cunha,
Courtney Epstein,
Greg Fitzgerald,
Ana E. Garcia Perez,
Fred R. Hearty,
Chuck Henderson,
Jon A. Holtzman,
Jennifer A. Johnson,
Charles R. Lam,
James E. Lawler,
Paul Maseman,
Szabolcs Meszaros,
Matthew Nelson,
Duy Coung Nguyen
, et al. (53 additional authors not shown)
Abstract:
The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100)…
▽ More
The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100), infrared (1.51-1.70 microns) spectra for 146,000 stars, with time series information via repeat visits to most of these stars. This paper describes the motivations for the survey and its overall design---hardware, field placement, target selection, operations---and gives an overview of these aspects as well as the data reduction, analysis and products. An index is also given to the complement of technical papers that describe various critical survey components in detail. Finally, we discuss the achieved survey performance and illustrate the variety of potential uses of the data products by way of a number of science demonstrations, which span from time series analysis of stellar spectral variations and radial velocity variations from stellar companions, to spatial maps of kinematics, metallicity and abundance patterns across the Galaxy and as a function of age, to new views of the interstellar medium, the chemistry of star clusters, and the discovery of rare stellar species. As part of SDSS-III Data Release 12, all of the APOGEE data products are now publicly available.
△ Less
Submitted 17 September, 2015;
originally announced September 2015.
-
A Measurement of the Coulomb Dissociation of 8B at 254 MeV/nucleon and the 8B Solar Neutrino Flux
Authors:
N. Iwasa,
F. Boue,
G. Surowka,
K. Suemmerer,
T. Baumann,
B. Blank,
S. Czajkowski,
A. Forster,
M. Gai,
H. Geissel,
E. Grosse,
M. Hellstrom,
P. Koczon,
B. Kohlmeyer,
R. Kulessa,
F. Laue,
C. Marchand,
T. Motobayashi,
H. Oeschler,
A. Ozawa,
M. S. Pravikoff,
E. Schwab,
W. Schwab,
P. Senger,
J. Speer
, et al. (7 additional authors not shown)
Abstract:
We have measured the Coulomb dissociation of 8B into 7Be and proton at 254 MeV/nucleon using a large-acceptance focusing spectrometer. The astrophysical S17 factor for the 7Be(p,gamma)8B reaction at E{c.m.} = 0.25-2.78 MeV is deduced yielding S17(0)=20.6 \pm 1.2 (exp.) \pm 1.0 (theo.) eV-b.
This result agrees with the presently adopted zero-energy S17 factor obtained in direct-reaction measure…
▽ More
We have measured the Coulomb dissociation of 8B into 7Be and proton at 254 MeV/nucleon using a large-acceptance focusing spectrometer. The astrophysical S17 factor for the 7Be(p,gamma)8B reaction at E{c.m.} = 0.25-2.78 MeV is deduced yielding S17(0)=20.6 \pm 1.2 (exp.) \pm 1.0 (theo.) eV-b.
This result agrees with the presently adopted zero-energy S17 factor obtained in direct-reaction measurements and with the results of other Coulomb-dissociation studies performed at 46.5 and 51.2 MeV/nucleon.
△ Less
Submitted 6 October, 1999; v1 submitted 17 September, 1999;
originally announced September 1999.