-
Real-time experimental demonstrations of a photonic lantern wavefront sensor
Authors:
Jonathan W. Lin,
Michael P. Fitzgerald,
Yinzi Xin,
Yoo Jung Kim,
Olivier Guyon,
Barnaby Norris,
Christopher Betters,
Sergio Leon-Saval,
Kyohoon Ahn,
Vincent Deo,
Julien Lozi,
Sébastien Vievard,
Daniel Levinstein,
Steph Sallum,
Nemanja Jovanovic
Abstract:
The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by…
▽ More
The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes
Authors:
Yoo Jung Kim,
Michael P. Fitzgerald,
Jonathan Lin,
Steph Sallum,
Yinzi Xin,
Nemanja Jovanovic,
Sergio Leon-Saval,
Christopher Betters,
Pradip Gatkine,
Olivier Guyon,
Julien Lozi,
Dimitri Mawet,
Barnaby Norris,
Sébastien Vievard
Abstract:
Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs…
▽ More
Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.
△ Less
Submitted 30 November, 2023;
originally announced December 2023.
-
Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime
Authors:
Jin Wei,
Barnaby Norris,
Christopher Betters,
Sergio Leon-Saval
Abstract:
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator…
▽ More
Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator (SLM) with combinations of different phase maps in both the linear regime (average incident RMS wavefront error (WFE) of 0.88 rad) and in the non-linear regime (average incident RMS WFE of 1.5 rad). Results were analysed using a NN to determine the transfer function of the relationship between the incident wavefront error (WFE) at the input modes at the multimode input of the PL and the intensity distribution output at the multicore fibre outputs end of the PL. The root mean square error (RMSE) of the reconstruction of petal and LWE modes were just $2.87\times10^{-2}$ rad and $2.07\times10^{-1}$ rad respectively, in the non-linear regime. The reconstruction RMSE for Zernike combinations ranged from $5.67\times10^{-2}$ rad to $8.43\times10^{-1}$ rad, depending on the number of Zernike terms and incident RMS WFE employed. These results demonstrate the promising potential of PLs as an innovative FP-WFS in conjunction with NNs.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
The path to detecting extraterrestrial life with astrophotonics
Authors:
Nemanja Jovanovic,
Yinzi Xin,
Michael P. Fitzgerald,
Olivier Guyon,
Peter Tuthill,
Barnaby Norris,
Pradip Gatkine,
Greg Sercel,
Svarun Soda,
Yoo Jung Kim,
Jonathan Lin,
Sergio Leon-Saval,
Rodrigo Amezcua-Correa,
Stephanos Yerolatsitis,
Julien Lozi,
Sebastien Vievard,
Chris Betters,
Steph Sallum,
Daniel Levinstein,
Dimitri Mawet,
Jeffrey Jewell,
J. Kent Wallace,
Nick Cvetojevic
Abstract:
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,…
▽ More
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a gaping void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets
Authors:
Sébastien Vievard,
Manon Lallement,
Elsa Huby,
Sylvestre Lacour,
Olivier Guyon,
Nemanja Jovanovic,
Sergio Leon-saval,
Julien Lozi,
Vincent Deo,
Kyohoon Ahn,
Nick Cvetojevic,
Kevin Barjot,
Guillermo Martin,
Harry-Dean Kenchington-Goldsmith,
Gaspard Duchêne,
Takayuki Kotani,
Franck Marchis,
Daniel Rouan,
Michael Fitzgerald,
Steph Sallum,
Barnaby Norris,
Chris Betters,
Pradip Gatkine,
John Lin,
Yoo Jung Kim
, et al. (5 additional authors not shown)
Abstract:
FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solutio…
▽ More
FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Learning the Lantern: Neural network applications to broadband photonic lantern modelling
Authors:
David Sweeney,
Barnaby R. M. Norris,
Peter Tuthill,
Richard Scalzo,
Jin Wei,
Christopher H. Betters,
Sergio G. Leon-Saval
Abstract:
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can b…
▽ More
Photonic lanterns allow the decomposition of highly multimodal light into a simplified modal basis such as single-moded and/or few-moded. They are increasingly finding uses in astronomy, optics and telecommunications. Calculating propagation through a photonic lantern using traditional algorithms takes $\sim 1$ hour per simulation on a modern CPU. This paper demonstrates that neural networks can bridge the disparate opto-electronic systems, and when trained can achieve a speed-up of over 5 orders of magnitude. We show that this approach can be used to model photonic lanterns with manufacturing defects as well as successfully generalising to polychromatic data. We demonstrate two uses of these neural network models, propagating seeing through the photonic lantern as well as performing global optimisation for purposes such as photonic lantern funnels and photonic lantern nullers.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Phase Retrieval and Design with Automatic Differentiation
Authors:
Alison Wong,
Benjamin Pope,
Louis Desdoigts,
Peter Tuthill,
Barnaby Norris,
Chris Betters
Abstract:
The principal limitation in many areas of astronomy, especially for directly imaging exoplanets, arises from instability in the point spread function (PSF) delivered by the telescope and instrument. To understand the transfer function, it is often necessary to infer a set of optical aberrations given only the intensity distribution on the sensor - the problem of phase retrieval. This can be import…
▽ More
The principal limitation in many areas of astronomy, especially for directly imaging exoplanets, arises from instability in the point spread function (PSF) delivered by the telescope and instrument. To understand the transfer function, it is often necessary to infer a set of optical aberrations given only the intensity distribution on the sensor - the problem of phase retrieval. This can be important for post-processing of existing data, or for the design of optical phase masks to engineer PSFs optimized to achieve high contrast, angular resolution, or astrometric stability. By exploiting newly efficient and flexible technology for automatic differentiation, which in recent years has undergone rapid development driven by machine learning, we can perform both phase retrieval and design in a way that is systematic, user-friendly, fast, and effective. By using modern gradient descent techniques, this converges efficiently and is easily extended to incorporate constraints and regularization. We illustrate the wide-ranging potential for this approach using our new package, Morphine. Challenging applications performed with this code include precise phase retrieval for both discrete and continuous phase distributions, even where information has been censored such as heavily-saturated sensor data. We also show that the same algorithms can optimize continuous or binary phase masks that are competitive with existing best solutions for two example problems: an Apodizing Phase Plate (APP) coronagraph for exoplanet direct imaging, and a diffractive pupil for narrow-angle astrometry. The Morphine source code and examples are available open-source, with a similar interface to the popular physical optics package Poppy.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph
Authors:
J. Gordon Robertson,
Simon Ellis,
Qingshan Yu,
Joss Bland-Hawthorn,
Christopher Betters,
Martin Roth,
Sergio Leon-Saval
Abstract:
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray obse…
▽ More
Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray observations is possible. However, the background in the NIR is dominated by extremely bright atmospheric hydroxyl (OH) emission lines. In this paper we present the design of a diffraction-limited spectroscopic system using novel photonic components - a photonic lantern, OH Fiber Bragg Grating filters, and a photonic TIGER 2-dimensional pseudo-slit - to observe the Ps Balmer alpha line at 1.3122 microns for the first time.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets
Authors:
Theodoros Anagnos,
Mareike Trappen,
Blaise C. Kuo Tiong,
Tobias Feger,
Stephanos Yerolatsitis,
Robert J. Harris,
Julien Lozi,
Nemanja Jovanovic,
Tim A. Birks,
Sébastien Vievard,
Olivier Guyon,
Itandehui Gris-Sánchez,
Sergio G. Leon-Saval,
Barnaby Norris,
Sebastiaan Y. Haffert,
Phillip Hottinger,
Matthias Blaicher,
Yilin Xu,
Christopher H. Betters,
Christian Koos,
David W. Coutts,
Christian Schwab,
Andreas Quirrenbach
Abstract:
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demon…
▽ More
By combining IFS with ExAO we are now able to resolve objects close to the diffraction-limit of large telescopes, exploring new science cases. We introduce an IFU designed to couple light with a minimal platescale from the SCExAO facility at NIR wavelengths to a SM spectrograph. The IFU has a 3D-printed MLA on top of a custom SM MCF, to optimize the coupling of light into the fiber cores. We demonstrate the potential of the instrument via initial results from the first on-sky runs at the 8.2 m Subaru Telescope with a spectrograph using off-the-shelf optics, allowing for rapid development with low cost.
△ Less
Submitted 14 June, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
An innovative integral field unit upgrade with 3D-printed micro-lenses for the RHEA at Subaru
Authors:
Theodoros Anagnos,
Pascal Maier,
Philipp Hottinger,
Chris Betters,
Tobias Feger,
Sergio G. Leon-Saval,
Itandehui Gris-Sánchez,
Stephanos Yerolatsitis,
Julien Lozi,
Tim A. Birks,
Sebastian Vievard,
Nemanja Jovanovic,
Adam D. Rains,
Michael J. Ireland,
Robert J. Harris,
Blaise C. Kuo Tiong,
Olivier Guyon,
Barnaby Norris,
Sebastiaan Y. Haffert,
Matthias Blaicher,
Yilin Xu,
Moritz Straub,
Jörg-Uwe Pott,
Oliver Sawodny,
Philip L. Neureuther
, et al. (4 additional authors not shown)
Abstract:
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom bu…
▽ More
In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.
△ Less
Submitted 24 January, 2021;
originally announced January 2021.
-
An all-photonic focal-plane wavefront sensor
Authors:
Barnaby R. M. Norris,
Jin Wei,
Christopher H. Betters,
Alison Wong,
Sergio G. Leon-Saval
Abstract:
Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a pho…
▽ More
Adaptive optics (AO) is critical in astronomy, optical communications and remote sensing to deal with the rapid blurring caused by the Earth's turbulent atmosphere. But current AO systems are limited by their wavefront sensors, which need to be in an optical plane non-common to the science image and are insensitive to certain wavefront-error modes. Here we present a wavefront sensor based on a photonic lantern fibre-mode-converter and deep learning, which can be placed at the same focal plane as the science image, and is optimal for single-mode fibre injection. By measuring the intensities of an array of single-mode outputs, both phase and amplitude information on the incident wavefront can be reconstructed. We demonstrate the concept with simulations and an experimental realisation wherein Zernike wavefront errors are recovered from focal-plane measurements to a precision of $5.1\times10^{-3}\;π$ radians root-mean-squared-error.
△ Less
Submitted 22 October, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
-
First demonstration of OH suppression in a high efficiency near-infrared spectrograph
Authors:
S. C. Ellis,
J. Bland-Hawthorn,
J. S. Lawrence,
A. J. Horton,
R. Content,
M. M. Roth,
N. Pai,
R. Zhelem,
S. Case,
E. Hernandez,
S. G. Leon-Saval,
R. Haynes,
S. S. Min,
D. Giannone,
K. Madhav,
A. Rahman,
C. Betters,
D. Haynes,
W. Couch,
L. J. Kewley,
R. McDermid,
L. Spitler,
R. G. Sharp,
S. Veilleux
Abstract:
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long stan…
▽ More
Ground-based near-infrared astronomy is severely hampered by the forest of atmospheric emission lines resulting from the rovibrational decay of OH molecules in the upper atmosphere. The extreme brightness of these lines, as well as their spatial and temporal variability, makes accurate sky subtraction difficult. Selectively filtering these lines with OH suppression instruments has been a long standing goal for near-infrared spectroscopy. We have shown previously the efficacy of fibre Bragg gratings combined with photonic lanterns for achieving OH suppression. Here we report on PRAXIS, a unique near-infrared spectrograph that is optimised for OH suppression with fibre Bragg gratings. We show for the first time that OH suppression (of any kind) is possible with high overall throughput (18 per cent end-to-end), and provide examples of the relative benefits of OH suppression.
△ Less
Submitted 12 January, 2020;
originally announced January 2020.
-
Astro2020: Astrophotonics White Paper
Authors:
Pradip Gatkine,
Sylvain Veilleux,
John Mather,
Christopher Betters,
Jonathan Bland-Hawthorn,
Julia Bryant,
S. Bradley Cenko,
Mario Dagenais,
Drake Deming,
Simon Ellis,
Matthew Greenhouse,
Andrew Harris,
Nemanja Jovanovic,
Steve Kuhlmann,
Alexander Kutyrev,
Sergio Leon-Saval,
Kalaga Madhav,
Samuel Moseley,
Barnaby Norris,
Bernard Rauscher,
Martin Roth,
Stuart Vogel
Abstract:
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic pla…
▽ More
Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Holistic spectroscopy: Complete reconstruction of a wide-field, multi-object spectroscopic image using a photonic comb
Authors:
Janez Kos,
Joss Bland-Hawthorn,
Christopher H. Betters,
Sergio Leon-Saval,
Martin Asplund,
Sven Buder,
Andrew R. Casey,
Valentina D'Orazi,
Gayandhi de Silva,
Ken Freeman,
Geraint Lewis,
Jane Lin,
Sarah L. Martell,
Katharine Schlesinger,
Sanjib Sharma,
Jeffrey D. Simpson,
Daniel Zucker,
Tomaž Zwitter,
Michael Hayden,
David M. Nataf,
Yuan-Sen Ting
Abstract:
The primary goal of Galactic archaeology is to learn about the origin of the Milky Way from the detailed chemistry and kinematics of millions of stars. Wide-field multi-fibre spectrographs are increasingly used to obtain spectral information for huge samples of stars. Some surveys (e.g. GALAH) are attempting to measure up to 30 separate elements per star. Stellar abundance spectroscopy is a subtle…
▽ More
The primary goal of Galactic archaeology is to learn about the origin of the Milky Way from the detailed chemistry and kinematics of millions of stars. Wide-field multi-fibre spectrographs are increasingly used to obtain spectral information for huge samples of stars. Some surveys (e.g. GALAH) are attempting to measure up to 30 separate elements per star. Stellar abundance spectroscopy is a subtle art that requires a very high degree of spectral uniformity across each of the fibres. However wide-field spectrographs are notoriously non-uniform due to the fast output optics necessary to image many fibre outputs onto the detector. We show that precise spectroscopy is possible with such instruments across all fibres by employing a photonic comb -- a device that produces uniformly spaced spots of light on the CCD to precisely map complex aberrations. Aberrations are parametrized by a set of orthogonal moments with $\sim100$ independent parameters. We then reproduce the observed image by convolving high resolution spectral templates with measured aberrations as opposed to extracting the spectra from the observed image. Such a forward modeling approach also trivializes some spectroscopic reduction problems like fibre cross-talk, and reliably extracts spectra with a resolution $\sim2.3$ times above the nominal resolution of the instrument. Our rigorous treatment of optical aberrations also encourages a less conservative spectrograph design in the future.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
Developing post-coronagraphic, high-resolution spectroscopy for terrestrial planet characterization on ELTs
Authors:
N. Jovanovic,
O. Guyon,
T. Kotani,
H. Kawahara,
K. Hosokawa,
J. Lozi,
J. Males,
M. Ireland,
M. Tamura,
D. Mawet,
C. Schwab,
B. Norris,
S. Leon-Saval,
C. Betters,
P. Tuthill
Abstract:
Spectroscopic observations are extremely important for determining the composition, structure, and surface gravity of exoplanetary atmospheres. High resolution spectroscopy of the planet itself has only been demonstrated a handful of times. By using advanced high contrast imagers, it is possible to conduct high resolution spectroscopy on imageable exoplanets, after the star light is first suppress…
▽ More
Spectroscopic observations are extremely important for determining the composition, structure, and surface gravity of exoplanetary atmospheres. High resolution spectroscopy of the planet itself has only been demonstrated a handful of times. By using advanced high contrast imagers, it is possible to conduct high resolution spectroscopy on imageable exoplanets, after the star light is first suppressed with an advanced coronagraph. Because the planet is spatially separated in the focal plane, a single mode fiber could be used to collect the light from the planet alone, reducing the photon noise by orders of magnitude. In addition, speckle control applied to the location where an exoplanet is known to exist, can be used to preferentially reject the stellar flux from the fiber further.
In this paper we will present the plans for conducting high resolution spectroscopic studies of this nature with the combination of SCExAO and IRD in the H-band on the Subaru Telescope. This technique will be critical to the characterization of terrestrial planets on ELTs and future space missions.
△ Less
Submitted 22 December, 2017; v1 submitted 20 December, 2017;
originally announced December 2017.
-
Demonstration of an efficient, photonic-based astronomical spectrograph on an 8-m telescope
Authors:
N. Jovanovic,
N. Cvetojevic,
B. Norris,
C. Betters,
C. Schwab,
J. Lozi,
O. Guyon,
S. Gross,
F. Martinache,
P. Tuthill,
D. Doughty,
Y. Minowa,
N. Takato,
J. Lawrence
Abstract:
We demonstrate for the first time an efficient, photonic-based astronomical spectrograph on the 8-m Subaru Telescope. An extreme adaptive optics system is combined with pupil apodiziation optics to efficiently inject light directly into a single-mode fiber, which feeds a compact cross-dispersed spectrograph based on array waveguide grating technology. The instrument currently offers a throughput o…
▽ More
We demonstrate for the first time an efficient, photonic-based astronomical spectrograph on the 8-m Subaru Telescope. An extreme adaptive optics system is combined with pupil apodiziation optics to efficiently inject light directly into a single-mode fiber, which feeds a compact cross-dispersed spectrograph based on array waveguide grating technology. The instrument currently offers a throughput of 5% from sky-to-detector which we outline could easily be upgraded to ~13% (assuming a coupling efficiency of 50%). The isolated spectrograph throughput from the single-mode fiber to detector was 42% at 1550 nm. The coupling efficiency into the single-mode fiber was limited by the achievable Strehl ratio on a given night. A coupling efficiency of 47% has been achieved with ~60% Strehl ratio on-sky to date. Improvements to the adaptive optics system will enable 90% Strehl ratio and a coupling of up to 67% eventually. This work demonstrates that the unique combination of advanced technologies enables the realization of a compact and highly efficient spectrograph, setting a precedent for future instrument design on very-large and extremely-large telescopes.
△ Less
Submitted 26 August, 2017; v1 submitted 6 July, 2017;
originally announced July 2017.
-
Mapping the aberrations of a wide-field spectrograph using a photonic comb
Authors:
Joss Bland-Hawthorn,
Janez Kos,
Christopher Betters,
Gayandhi De Silva,
John O'Byrne,
Rob Patterson,
Sergio Leon-Saval
Abstract:
We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over…
▽ More
We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over the field arising from the optical train. This approach is impractical in the presence of a dispersing element because the diffraction-limited spots in the focal plane are imaged as an array of overlapping spectra. Instead we propose a compact solution that builds on recent developments in fibre-based Fabry-Perot etalons. We introduce a novel approach to near-field illumination that exploits a 25cm commercial telescope and the propagation of skew rays in a multimode fibre. The mapping of the optical transfer function across the full field is represented accurately (<0.5% rms residual) by an orthonormal set of Chebyshev moments. Thus we are able to reconstruct the full 4Kx4K CCD image of the dispersed output from the optical fibres using this mapping, as we demonstrate. Our method removes one of the largest sources of systematic error in multi-object spectroscopy.
△ Less
Submitted 27 April, 2017;
originally announced April 2017.
-
The GALAH survey: The data reduction pipeline
Authors:
Janez Kos,
Jane Lin,
Tomaž Zwitter,
Maruška Žerjal,
Sanjib Sharma,
Joss Bland-Hawthorn,
Martin Asplund,
Andrew R. Casey,
Gayandhi M. De Silva,
Ken C. Freeman,
Sarah L. Martell,
Jeffrey D. Simpson,
Katharine J. Schlesinger,
Daniel Zucker,
Borja Anguiano,
Carlos Bacigalupo,
Timothy R. Bedding,
Christopher Betters,
Gary Da Costa,
Ly Duong,
Elaina Hyde,
Michael Ireland,
Prajwal R. Kafle,
Sergio Leon-Saval,
Geraint F. Lewis
, et al. (7 additional authors not shown)
Abstract:
We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9~m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates…
▽ More
We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9~m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates the development of a reduction pipeline optimized for speed, accuracy, and consistency. We outline the design and structure of the Iraf-based reduction pipeline that we developed, specifically for GALAH, to produce fully calibrated spectra aimed for subsequent stellar atmospheric parameter estimation. The pipeline takes advantage of existing Iraf routines and other readily available software so as to be simple to maintain, testable and reliable. A radial velocity and stellar atmospheric parameter estimator code is also presented, which is used for further data analysis and yields a useful verification of the reduction quality. We have used this estimator to quantify the data quality of GALAH for fibre cross-talk level ($\lesssim0.5$%) and scattered light ($\sim5$ counts in a typical 20 minutes exposure), resolution across the field, sky spectrum properties, wavelength solution reliability (better than $1$ $\mathrm{km\ s^{-1}}$ accuracy) and radial velocity precision.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
Beating the classical limit: A diffraction-limited spectrograph for an arbitrary input beam
Authors:
Christopher H. Betters,
Sergio G. Leon-Saval,
J. Gordon Robertson,
Joss Bland-Hawthorn
Abstract:
We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is…
▽ More
We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is constructed from 'commercial off the shelf' components; (ii) the instrument is the minimum size and mass configuration at a fixed resolving power and spectral order (~shoebox sized in this case); (iii) the throughput is better than 60% (slit to detector, including detector QE of ~80%); (iv) the scattered light at the detector can be less than 0.1% (total power). Our first implementation operates over 1545-1555 nm (limited by the detector, a 640$\times$512 array with 20$μ$m pitch) with a spectral resolution of 0.055nm (R~30,000) using a 1$\times$7 (1 multi-mode input to 7 single-mode outputs) photonic lantern. This approach is a first step towards a fully integrated, multimode photonic microspectrograph.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
Single mode, extreme precision Doppler spectrographs
Authors:
Christian Schwab,
Sergio G. Leon-Saval,
Christopher H. Betters,
Joss Bland-Hawthorn,
Suvrath Mahadevan
Abstract:
The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than t…
▽ More
The 'holy grail' of exoplanet research today is the detection of an earth-like planet: a rocky planet in the habitable zone around a main-sequence star. Extremely precise Doppler spectroscopy is an indispensable tool to find and characterize earth-like planets; however, to find these planets around solar-type stars, we need nearly one order of magnitude better radial velocity (RV) precision than the best current spectrographs provide. Recent developments in astrophotonics (Bland-Hawthorn & Horton 2006, Bland-Hawthorn et al. 2010) and adaptive optics (AO) enable single mode fiber (SMF) fed, high resolution spectrographs, which can realize the next step in precision. SMF feeds have intrinsic advantages over multimode fiber or slit coupled spectrographs: The intensity distribution at the fiber exit is extremely stable, and as a result the line spread function of a well-designed spectrograph is fully decoupled from input coupling conditions, like guiding or seeing variations (Ihle et al. 2010). Modal noise, a limiting factor in current multimode fiber fed instruments (Baudrand & Walker 2001), can be eliminated by proper design, and the diffraction limited input to the spectrograph allows for very compact instrument designs, which provide excellent optomechanical stability. A SMF is the ideal interface for new, very precise wavelength calibrators, like laser frequency combs (Steinmetz et al. 2008, Osterman et al. 2012), or SMF based Fabry-Perot Etalons (Halverson et al. 2012). At near infrared wavelengths, these technologies are ready to be implemented in on-sky instruments, or already in use. We discuss a novel concept for such a spectrograph.
△ Less
Submitted 19 December, 2012;
originally announced December 2012.
-
First starlight spectrum captured using an integrated photonic micro-spectrograph
Authors:
N. Cvetojevic,
N. Jovanovic,
C. Betters,
J. S. Lawrence,
S. C. Ellis,
G. Robertson,
J. Bland-Hawthorn
Abstract:
Photonic technologies have received growing consideration for incorporation into next-generation astronomical instrumentation, owing to their miniature footprint and inherent robustness. In this paper we present results from the first on-telescope demonstration of a miniature photonic spectrograph for astronomy, by obtaining spectra spanning the entire H-band from several stellar targets. The prot…
▽ More
Photonic technologies have received growing consideration for incorporation into next-generation astronomical instrumentation, owing to their miniature footprint and inherent robustness. In this paper we present results from the first on-telescope demonstration of a miniature photonic spectrograph for astronomy, by obtaining spectra spanning the entire H-band from several stellar targets. The prototype was tested on the 3.9 m Anglo-Australian telescope. In particular, we present a spectrum of the variable star Pi 01 Gru, with observed CO molecular absorption bands, at a resolving power R = 2500 at 1600 nm. Furthermore, we successfully demonstrate the simultaneous acquisition of multiple spectra with a single spectrograph chip by using multiple fibre inputs.
△ Less
Submitted 21 August, 2012;
originally announced August 2012.
-
The Photonic TIGER: a multicore fiber-fed spectrograph
Authors:
Sergio G. Leon-Saval,
Christopher H. Betters,
Joss Bland-Hawthorn
Abstract:
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dis…
▽ More
We present a proof of concept compact diffraction limited high-resolution fiber-fed spectrograph by using a 2D multicore array input. This high resolution spectrograph is fed by a 2D pseudo-slit, the Photonic TIGER, a hexagonal array of near-diffraction limited single-mode cores. We study the feasibility of this new platform related to the core array separation and rotation with respect to the dispersion axis. A 7 core compact Photonic TIGER fiber-fed spectrograph with a resolving power of around R~31000 and 8 nm bandwidth in the IR centered on 1550 nm is demonstrated. We also describe possible architectures based on this concept for building small scale compact diffraction limited Integral Field Spectrographs (IFS).
△ Less
Submitted 14 August, 2012;
originally announced August 2012.
