-
Scaling slowly rotating asteroids by stellar occultations
Authors:
A. Marciniak,
J. Ďurech,
A. Choukroun,
J. Hanuš,
W. Ogłoza,
R. Szakáts,
L. Molnár,
A. Pál,
F. Monteiro,
E. Frappa,
W. Beisker,
H. Pavlov,
J. Moore,
R. Adomavičienė,
R. Aikawa,
S. Andersson,
P. Antonini,
Y. Argentin,
A. Asai,
P. Assoignon,
J. Barton,
P. Baruffetti,
K. L. Bath,
R. Behrend,
L. Benedyktowicz
, et al. (154 additional authors not shown)
Abstract:
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for m…
▽ More
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons.
Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent.
We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity.
The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters.
Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Asteroid spin-states of a 4 Gyr collisional family
Authors:
D. Athanasopoulos,
J. Hanus,
C. Avdellidou,
R. Bonamico,
M. Delbo,
M. Conjat,
A. Ferrero,
K. Gazeas,
J. P. Rivet,
N. Sioulas,
G. van Belle,
P. Antonini,
M. Audejean,
R. Behrend,
L. Bernasconi,
J. W. Brinsfield,
S. Brouillard,
L. Brunetto,
M. Fauvaud,
S. Fauvaud,
R. González,
D. Higgins,
T. W. -S. Holoien,
G. Kobber,
R. A. Koff
, et al. (7 additional authors not shown)
Abstract:
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape…
▽ More
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape). This method has been shown to be effective in the cases of the very diffuse families that formed billions of years ago. We obtained photometric observations of asteroids in order to construct their rotational light curves; we combine them with the literature light curves and sparse-in-time photometry; we input these data in the light curve inversion methods to determine the shape and the spin pole of the asteroids in order to assess whether an object is prograde or retrograde. The ultimate goal is to assess whether we find an excess of retrograde asteroids on the inward side of the V-shape of a 4 Gyr asteroid family identified via the V-shape method. This excess of retrograde rotators is predicted by the theory of asteroid family evolution. We obtained the spin poles for 55 asteroids claimed to belong to a 4 Gyr collisional family of the inner main belt that consists of low-albedo asteroids. After re-evaluating the albedo and spectroscopic information, we found that nine of these asteroids are interlopers in the 4 Gyr family. Of the 46 remaining asteroids, 31 are found to be retrograde and 15 prograde. We also found that these retrograde rotators have a very low probability (1.29%) of being due to random sampling from an underlying uniform distribution of spin poles. Our results constitute corroborating evidence that the asteroids identified as members of a 4 Gyr collisional family have a common origin, thus strengthening their family membership.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Properties of slowly rotating asteroids from the Convex Inversion Thermophysical Model
Authors:
A. Marciniak,
J. Ďurech,
V. Alí-Lagoa,
W. Ogłoza,
R. Szakáts,
T. G. Müller,
L. Molnár,
A. Pál,
F. Monteiro,
P. Arcoverde,
R. Behrend,
Z. Benkhaldoun,
L. Bernasconi,
J. Bosch,
S. Brincat,
L. Brunetto,
M. Butkiewicz - Bąk,
F. Del Freo,
R. Duffard,
M. Evangelista-Santana,
G. Farroni,
S. Fauvaud,
M. Fauvaud,
M. Ferrais,
S. Geier
, et al. (51 additional authors not shown)
Abstract:
Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes.
We continue our campaign in minimi…
▽ More
Results from the TESS mission showed that previous studies strngly underestimated the number of slow rotators, revealing the importance of studying those asteroids. For most slowly rotating asteroids (P > 12), no spin and shape model is available because of observation selection effects. This hampers determination of their thermal parameters and accurate sizes.
We continue our campaign in minimising selection effects among main belt asteroids. Our targets are slow rotators with low light-curve amplitudes. The goal is to provide their scaled spin and shape models together with thermal inertia, albedo, and surface roughness to complete the statistics. Rich multi-apparition datasets of dense light curves are supplemented with data from Kepler and TESS. In addition to data in the visible range, we also use thermal data from infrared space observatories (IRAS, Akari and WISE) in a combined optimisation process using the Convex Inversion Thermophysical Model (CITPM). This novel method has so far been applied to only a few targets, and in this work we further validate the method.
We present the models of 16 slow rotators. All provide good fits to both thermal and visible data. The obtained sizes are on average accurate at the 5% precision, with diameters in the range from 25 to 145 km. The rotation periods of our targets range from 11 to 59 hours, and the thermal inertia covers a wide range of values, from 2 to <400 SI units, not showing any correlation with the period. With this work we increase the sample of slow rotators with reliable spin and shape models and known thermal inertia by 40%. The thermal inertia values of our sample do not display a previously suggested increasing trend with rotation period, which might be due to their small skin depth.
△ Less
Submitted 1 September, 2021;
originally announced September 2021.
-
Physical parameters of selected Gaia mass asteroids
Authors:
E. Podlewska-Gaca,
A. Marciniak,
V. Alí-Lagoa,
P. Bartczak,
T. G. Müller,
R. Szakáts,
R. Duffard,
L. Molnár,
A. Pál,
M. Butkiewicz-Bąk,
G. Dudziński,
K. Dziadura,
P. Antonini,
V. Asenjo,
M. Audejean,
Z. Benkhaldoun,
R. Behrend,
L. Bernasconi,
J. M. Bosch,
A. Chapman,
B. Dintinjana,
A. Farkas,
M. Ferrais,
S. Geier,
J. Grice
, et al. (14 additional authors not shown)
Abstract:
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties a…
▽ More
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
Thermal properties of slowly rotating asteroids: Results from a targeted survey
Authors:
A. Marciniak,
V. Alí-Lagoa,
T. G. Müller,
R. Szakáts,
L. Molnár,
A. Pál,
E. Podlewska - Gaca,
N. Parley,
P. Antonini,
E. Barbotin,
R. Behrend,
L. Bernasconi,
M. Butkiewicz - Bąk,
R. Crippa,
R. Duffard,
R. Ditteon,
M. Feuerbach,
S. Fauvaud,
J. Garlitz,
S. Geier,
R. Goncalves,
J. Grice,
I. Grześkowiak,
R. Hirsch,
J. Horbowicz
, et al. (29 additional authors not shown)
Abstract:
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are…
▽ More
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period.
Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE.
Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$.
Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
The homogeneous internal structure of CM-like asteroid (41) Daphne
Authors:
B. Carry,
F. Vachier,
J. Berthier,
M. Marsset,
P. Vernazza,
J. Grice,
W. J. Merline,
E. Lagadec,
A. Fienga,
A. Conrad,
E. Podlewska-Gaca,
T. Santana-Ros,
M. Viikinkoski,
J. Hanuš,
C. Dumas,
J. D. Drummond,
P. M. Tamblyn,
C. R. Chapman,
R. Behrend,
L. Bernasconi,
P. Bartczak,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani
, et al. (26 additional authors not shown)
Abstract:
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Tr…
▽ More
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Physical, spectral, and dynamical properties of asteroid (107) Camilla and its satellites
Authors:
M. Pajuelo,
B. Carry,
F. Vachier,
M. Marsset,
J. Berthier,
P. Descamps,
W. J. Merline,
P. M. Tamblyn,
J. Grice,
A. Conrad,
A. Storrs,
B. Timerson,
D. Dunham,
S. Preston,
A. Vigan,
B. Yang,
P. Vernazza,
S. Fauvaud,
L. Bernasconi,
D. Romeuf,
R. Behrend,
C. Dumas,
J. D. Drummond,
J. -L. Margot,
P. Kervella
, et al. (2 additional authors not shown)
Abstract:
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution…
▽ More
The population of large asteroids is thought to be primordial and they are the most direct witnesses of the early history of our Solar System. Those satellites allow study of the mass, and hence density and internal structure. We study here the properties of the triple asteroid (107) Camilla from lightcurves, stellar occultations, optical spectroscopy, and high-contrast and high-angular-resolution images and spectro-images. Using 80 positions over 15 years, we determine the orbit of its larger satellite to be circular, equatorial, and prograde, with RMS residuals of 7.8 mas. From 11 positions in three epochs only, in 2015 and 2016, we determine a preliminary orbit for the second satellite. We find the orbit to be somewhat eccentric and slightly inclined to the primary's equatorial plane, reminiscent of the inner satellites of other asteroid triple systems. Comparison of the near-infrared spectrum of the larger satellite reveals no significant difference with Camilla. Hence, these properties argue for a formation of the satellites by excavation from impact and re-accumulation of ejecta. We determine the spin and 3-D shape of Camilla. The model fits well each data set. We determine Camilla to be larger than reported from modeling of mid-infrared photometry, with a spherical-volume-equivalent diameter of 254 $\pm$ 36 km (3 $σ$ uncertainty), in agreement with recent results from shape modeling (Hanus2017+). Combining the mass of (1.12 $\pm$ 0.01) $\times$ 10$^{19}$ kg determined from the dynamics of the satellites and the volume from the 3-D shape model, we determine a density of 1,280 $\pm$ 130 SI. From this density, and considering Camilla's spectral similarities with (24) Themis and (65) Cybele (for which water ice coating on surface grains was reported), we infer a silicate-to-ice mass ratio of 1-6, with a 10-30% macroporosity.
△ Less
Submitted 7 March, 2018;
originally announced March 2018.
-
Photometric survey, modelling, and scaling of long-period and low-amplitude asteroids
Authors:
A. Marciniak,
P. Bartczak,
T. Müller,
J. J. Sanabria,
V. Alí-Lagoa,
P. Antonini,
R. Behrend,
L. Bernasconi,
M. Bronikowska,
M. Butkiewicz - Bąk,
A. Cikota,
R. Crippa,
R. Ditteon,
G. Dudziński,
R. Duffard,
K. Dziadura,
S. Fauvaud,
S. Geier,
R. Hirsch,
J. Horbowicz,
M. Hren,
L. Jerosimic,
K. Kamiński,
P. Kankiewicz,
I. Konstanciak
, et al. (18 additional authors not shown)
Abstract:
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a l…
▽ More
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods.
We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves.
We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined.
Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Spin states of asteroids in the Eos collisional family
Authors:
J. Hanuš,
M. Delbo',
V. Alí-Lagoa,
B. Bolin,
R. Jedicke,
J. Ďurech,
H. Cibulková,
P. Pravec,
P. Kušnirák,
R. Behrend,
F. Marchis,
P. Antonini,
L. Arnold,
M. Audejean,
M. Bachschmidt,
L. Bernasconi,
L. Brunetto,
S. Casulli,
R. Dymock,
N. Esseiva,
M. Esteban,
O. Gerteis,
H. de Groot,
H. Gully,
H. Hamanowa
, et al. (12 additional authors not shown)
Abstract:
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain…
▽ More
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain theoretical collisional and evolution models of the family, or to estimate other physical parameters by a thermophysical modeling of the thermal infrared data. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as input for the convex inversion method, and derive 3D shape models of asteroids together with their rotation periods and orientations of rotation axes. We present updated shape models for 15 asteroids and new shape model determinations for 16 asteroids. Together with the already published models from the publicly available DAMIT database, we compiled a sample of 56 Eos family members with known shape models that we used in our analysis of physical properties within the family. Rotation states of asteroids smaller than ~20 km are heavily influenced by the YORP effect, whilst the large objects more or less retained their rotation state properties since the family creation. Moreover, we also present a shape model and bulk density of asteroid (423) Diotima, an interloper in the Eos family, based on the disk-resolved data obtained by the Near InfraRed Camera (Nirc2) mounted on the W.M. Keck II telescope.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
New and updated convex shape models of asteroids based on optical data from a large collaboration network
Authors:
J. Hanuš,
J. Ďurech,
D. A. Oszkiewicz,
R. Behrend,
B. Carry,
M. Delbo',
O. Adam,
V. Afonina,
R. Anquetin,
P. Antonini,
L. Arnold,
M. Audejean,
P. Aurard,
M. Bachschmidt,
B. Badue,
E. Barbotin,
P. Barroy,
P. Baudouin,
L. Berard,
N. Berger,
L. Bernasconi,
J-G. Bosch,
S. Bouley,
I. Bozhinova,
J. Brinsfield
, et al. (144 additional authors not shown)
Abstract:
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further stu…
▽ More
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
SOPHIE velocimetry of Kepler transit candidates XII. KOI-1257 b: a highly eccentric three-month period transiting exoplanet
Authors:
A. Santerne,
G. Hébrard,
M. Deleuil,
M. Havel,
A. C. M. Correia,
J. -M. Almenara,
R. Alonso,
L. Arnold,
S. C. C. Barros,
R. Behrend,
L. Bernasconi,
I. Boisse,
A. S. Bonomo,
F. Bouchy,
G. Bruno,
C. Damiani,
R. F. Díaz,
D. Gravallon,
T. Guillot,
O. Labrevoir,
G. Montagnier,
C. Moutou,
C. Rinner,
N. C. Santos,
L. Abe
, et al. (14 additional authors not shown)
Abstract:
In this paper we report a new transiting warm giant planet: KOI-1257 b. It was first detected in photometry as a planet-candidate by the ${\it Kepler}$ space telescope and then validated thanks to a radial velocity follow-up with the SOPHIE spectrograph. It orbits its host star with a period of 86.647661 d $\pm$ 3 s and a high eccentricity of 0.772 $\pm$ 0.045. The planet transits the main star of…
▽ More
In this paper we report a new transiting warm giant planet: KOI-1257 b. It was first detected in photometry as a planet-candidate by the ${\it Kepler}$ space telescope and then validated thanks to a radial velocity follow-up with the SOPHIE spectrograph. It orbits its host star with a period of 86.647661 d $\pm$ 3 s and a high eccentricity of 0.772 $\pm$ 0.045. The planet transits the main star of a metal-rich, relatively old binary system with stars of mass of 0.99 $\pm$ 0.05 Msun and 0.70 $ \pm $ 0.07 Msun for the primary and secondary, respectively. This binary system is constrained thanks to a self-consistent modelling of the ${\it Kepler}$ transit light curve, the SOPHIE radial velocities, line bisector and full-width half maximum (FWHM) variations, and the spectral energy distribution. However, future observations are needed to confirm it. The PASTIS fully-Bayesian software was used to validate the nature of the planet and to determine which star of the binary system is the transit host. By accounting for the dilution from the binary both in photometry and in radial velocity, we find that the planet has a mass of 1.45 $ \pm $ 0.35 Mjup, and a radius of 0.94 $ \pm $ 0.12 Rjup, and thus a bulk density of 2.1 $ \pm $ 1.2 g.cm$^{-3}$. The planet has an equilibrium temperature of 511 $\pm$ 50 K, making it one of the few known members of the warm-jupiter population. The HARPS-N spectrograph was also used to observe a transit of KOI-1257 b, simultaneously with a joint amateur and professional photometric follow-up, with the aim of constraining the orbital obliquity of the planet. However, the Rossiter-McLaughlin effect was not clearly detected, resulting in poor constraints on the orbital obliquity of the planet.
△ Less
Submitted 21 August, 2014; v1 submitted 24 June, 2014;
originally announced June 2014.
-
Asteroids' physical models from combined dense and sparse photometry and scaling of the YORP effect by the observed obliquity distribution
Authors:
J. Hanuš,
J. Ďurech,
M. Brož,
A. Marciniak,
B. D. Warner,
F. Pilcher,
R. Stephens,
R. Behrend,
B. Carry,
D. Čapek,
P. Antonini,
M. Audejean,
K. Augustesen,
E. Barbotin,
P. Baudouin,
A. Bayol,
L. Bernasconi,
W. Borczyk,
J. -G. Bosch,
E. Brochard,
L. Brunetto,
S. Casulli,
A. Cazenave,
S. Charbonnel,
B. Christophe
, et al. (95 additional authors not shown)
Abstract:
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can…
▽ More
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
A study of asteroid pole-latitude distribution based on an extended set of shape models derived by the lightcurve inversion method
Authors:
Josef Hanus,
Josef Durech,
Miroslav Broz,
Brian D. Warner,
Frederick Pilcher,
Robert Stephens,
Julian Oey,
Laurent Bernasconi,
Silvano Casulli,
Raoul Behrend,
David Polishook,
Tomas Henych,
Martin Lehky,
Fumi Yoshida,
Takashi Ito
Abstract:
Tens of thousands of sparse-in-time lightcurves from astrometric projects are publicly available. We investigate these data and use them in the lightcurve inversion method to derive new asteroid models. By having a greater number of models with known physical properties, we can gain a better insight into the nature of individual objects and into the whole asteroid population. We use sparse photome…
▽ More
Tens of thousands of sparse-in-time lightcurves from astrometric projects are publicly available. We investigate these data and use them in the lightcurve inversion method to derive new asteroid models. By having a greater number of models with known physical properties, we can gain a better insight into the nature of individual objects and into the whole asteroid population. We use sparse photometry from selected observatories from the AstDyS database, either alone or in combination with dense lightcurves, to determine new asteroid models by the lightcurve inversion method. We present 80 new asteroid models derived from combined data sets where sparse photometry is taken from the AstDyS database and dense lightcurves are from the Uppsala Asteroid Photometric Catalogue (UAPC) and from several individual observers. For 18 asteroids, we present updated shape solutions based on new photometric data. The addition of new models increases the total number of models derived by the lightcurve inversion method to ~200. We also present a simple statistical analysis of physical properties of asteroids where we look for possible correlations between various physical parameters with an emphasis on the spin vector. We present the observed and de-biased distributions of ecliptic latitudes with respect to different size ranges of asteroids as well as a simple theoretical model of the latitude distribution and then compare its predictions with the observed distributions. From this analysis we find that the latitude distribution of small asteroids (D < 30 km) is clustered towards ecliptic poles and can be explained by the YORP thermal effect while the latitude distribution of larger asteroids (D > 60 km) exhibits an evident excess of prograde rotators, probably of primordial origin.
△ Less
Submitted 20 April, 2011;
originally announced April 2011.
-
High Fill-Out, Extreme Mass Ratio Overcontact Binary Systems. X. The new discovered binary XY Leonis Minoris
Authors:
S. -B. Qian,
L. Liu,
L. -Y. Zhu,
J. -J. He,
Y. -G. Yang,
L. Bernasconi
Abstract:
The new discovered short-period close binary star, XY LMi, was monitored photometrically since 2006. It is shown that the light curves are typical EW-type and show complete eclipses with an eclipse duration of about 80 minutes. By analyzing the complete B, V, R, and I light curves with the 2003 version of the W-D code, photometric solutions were determined. It is discovered that XY LMi is a high f…
▽ More
The new discovered short-period close binary star, XY LMi, was monitored photometrically since 2006. It is shown that the light curves are typical EW-type and show complete eclipses with an eclipse duration of about 80 minutes. By analyzing the complete B, V, R, and I light curves with the 2003 version of the W-D code, photometric solutions were determined. It is discovered that XY LMi is a high fill-out, extreme mass ratio overcontact binary system with a mass ratio of q=0.148 and a fill-out factor of f=74.1%, suggesting that it is on the late evolutionary stage of late-type tidal-locked binary stars. As observed in other overcontact binary stars, evidence for the presence of two dark spots on both components are given. Based on our 19 epoches of eclipse times, it is found that the orbital period of the overcontact binary is decreasing continuously at a rate of dP/dt=-1.67\times10^{-7}\,days/year, which may be caused by the mass transfer from the primary to the secondary or/and angular momentum loss via magnetic stellar wind. The decrease of the orbital period may result in the increase of the fill-out, and finally, it will evolve into a single rapid-rotation star when the fluid surface reaching the outer critical Roche Lobe.
△ Less
Submitted 10 March, 2011;
originally announced March 2011.
-
Physical properties of ESA Rosetta target asteroid (21) Lutetia: Shape and flyby geometry
Authors:
B. Carry,
M. Kaasalainen,
C. Leyrat,
W. J. Merline,
J. D. Drummond,
A. Conrad,
H. A. Weaver,
P. M. Tamblyn,
C. R. Chapman,
C. Dumas,
F. Colas,
J. C. Christou,
E. Dotto,
D. Perna,
S. Fornasier,
L. Bernasconi,
R. Behrend,
F. Vachier,
A. Kryszczynska,
M. Polinska,
M. Fulchignoni,
R. Roy,
R. Naves,
R. Poncy,
P. Wiggins
Abstract:
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical light…
▽ More
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia.
Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of (λ = 52 deg., β = -6 deg.) in Ecliptic J2000 reference frame (equatorial α = 52 deg., δ = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
New insights on the binary asteroid 121 Hermione
Authors:
P. Descamps,
F. Marchis,
J. Durech,
J. Emery,
A. W. Harris,
M. Kaasalainen,
J. Berthier,
J. -P. Teng-Chuen-Yu,
A. Peyrot,
L. Hutton,
J. Greene,
J. Pollock,
M. Assafin,
R. Vieira-Martins,
J. I. B. Camargo,
F. Braga-Ribas,
F. Vachier,
D. E. Reichart,
K. M. Ivarsen,
J. A. Crain,
M. C. Nysewander,
A. P. Lacluyze,
J. B. Haislip,
R. Behrend,
F. Colas
, et al. (7 additional authors not shown)
Abstract:
We report on the results of a six-month photometric study of the main-belt binary C-type asteroid 121 Hermione, performed during its 2007 opposition. We took advantage of the rare observational opportunity afforded by one of the annual equinoxes of Hermione occurring close to its opposition in June 2007. The equinox provides an edge-on aspect for an Earth-based observer, which is well suited to…
▽ More
We report on the results of a six-month photometric study of the main-belt binary C-type asteroid 121 Hermione, performed during its 2007 opposition. We took advantage of the rare observational opportunity afforded by one of the annual equinoxes of Hermione occurring close to its opposition in June 2007. The equinox provides an edge-on aspect for an Earth-based observer, which is well suited to a thorough study of Hermione's physical characteristics. The catalog of observations carried out with small telescopes is presented in this work, together with new adaptive optics (AO) imaging obtained between 2005 and 2008 with the Yepun 8-m VLT telescope and the 10-m Keck telescope. The most striking result is confirmation that Hermione is a bifurcated and elongated body, as suggested by Marchis et al., (2005). A new effective diameter of 187 +/- 6 km was calculated from the combination of AO, photometric and thermal observations. The new diameter is some 10% smaller than the hitherto accepted radiometric diameter based on IRAS data. The reason for the discrepancy is that IRAS viewed the system almost pole-on. New thermal observations with the Spitzer Space Telescope agree with the diameter derived from AO and lightcurve observations. On the basis of the new AO astrometric observations of the small 32-km diameter satellite we have refined the orbit solution and derived a new value of the bulk density of Hermione of 1.4 +0.5/-0.2 g cm-3. We infer a macroscopic porosity of ~33 +5/-20%.
△ Less
Submitted 13 April, 2009;
originally announced April 2009.
