Showing 1–50 of 68 results for author: Aulanier, G

Generic low-atmosphere signatures of swirled-anemone jets

Authors: Reetika Joshi, Guillaume Aulanier, Alice Radcliffe, Luc Rouppe van der Voort, Etienne Pariat, Daniel Nóbrega-Siverio, Brigitte Schmieder

Abstract: Solar jets are collimated plasma flows moving along magnetic field lines and accelerated at low altitude following magnetic reconnection. Several of them originate from anemone-shaped low-lying arcades and the most impulsive ones tend to be relatively wider and display untwisting motions. We aim to establish typical behaviours and observational signatures in the low atmosphere that can occur in re… ▽ More Solar jets are collimated plasma flows moving along magnetic field lines and accelerated at low altitude following magnetic reconnection. Several of them originate from anemone-shaped low-lying arcades and the most impulsive ones tend to be relatively wider and display untwisting motions. We aim to establish typical behaviours and observational signatures in the low atmosphere that can occur in response to the coronal development of such impulsive jets. We analysed an observed solar jet associated with a circular flare ribbon, using high-resolution observations from SST coordinated with IRIS and SDO. We related specifically identified features with those developing in a generic 3D line-tied numerical simulation of reconnection driven jets, performed with the ARMS code. We identified three features in the SST observations: the formation of a hook along the circular ribbon, the gradual widening of the jet through the apparent displacement of its kinked edge towards, and not away from the presumed reconnection site, and the falling back of some of the jet plasma towards a footpoint offset from that of the jet itself. The 3D numerical simulation naturally accounts for these features which were not imposed a priori. Our analyses allow to interpret them in the context of the 3D geometry of the asymmetric swirled anemone loops and their sequences of reconnection with ambient coronal loops. Given the relatively-simple conditions in which the observed jet occurred, together with the generic nature of the simulation that comprised minimum assumptions, we predict that the specific features that we identified and interpreted are probably typical of every impulsive jet △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 13 pages, 8 figures, Accepted for publication in Astronomy and Astrophysics

Unveiling the Initiation Route of Coronal Mass Ejections through their Slow Rise Phase

Authors: Chen Xing, Guillaume Aulanier, Xin Cheng, Chun Xia, Mingde Ding

Abstract: Understanding the early evolution of coronal mass ejections (CMEs), in particular their initiation, is the key to forecasting solar eruptions and induced disastrous space weather. Although many initiation mechanisms have been proposed, a full understanding of CME initiation, which is identified as a slow rise of CME progenitors in kinematics before the impulsive acceleration, remains elusive. Here… ▽ More Understanding the early evolution of coronal mass ejections (CMEs), in particular their initiation, is the key to forecasting solar eruptions and induced disastrous space weather. Although many initiation mechanisms have been proposed, a full understanding of CME initiation, which is identified as a slow rise of CME progenitors in kinematics before the impulsive acceleration, remains elusive. Here, with a state-of-the-art thermal-magnetohydrodynamics simulation, we determine a complete CME initiation route in which multiple mainstream mechanisms occur in sequence yet are tightly coupled. The slow rise is first triggered and driven by the developing hyperbolic flux tube (HFT) reconnection. Subsequently, the slow rise continues as driven by the coupling of the HFT reconnection and the early development of torus instability. The end of the slow rise, i.e., the onset of the impulsive acceleration, is induced by the start of the fast magnetic reconnection coupled with the torus instability. These results unveil that the CME initiation is a complicated process involving multiple physical mechanisms, thus being hardly resolved by a single initiation mechanism. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: 35 pages, 15 figures, accepted for publication in ApJ

Identifying Footpoints of Pre-eruptive and Coronal Mass Ejection Flux Ropes with Sunspot Scars

Authors: Chen Xing, Guillaume Aulanier, Brigitte Schmieder, Xin Cheng, Mingde Ding

Abstract: The properties of pre-eruptive structures and coronal mass ejections (CMEs) are characterized by those of their footpoints, the latter of which thus attract great interest. However, how to identify the footpoints of pre-eruptive structures and how to identify the footpoints with ground-based instruments, still remain elusive. In this work, we study an arc-shaped structure intruding in the sunspot… ▽ More The properties of pre-eruptive structures and coronal mass ejections (CMEs) are characterized by those of their footpoints, the latter of which thus attract great interest. However, how to identify the footpoints of pre-eruptive structures and how to identify the footpoints with ground-based instruments, still remain elusive. In this work, we study an arc-shaped structure intruding in the sunspot umbra. It is located close to the (pre-)eruptive flux rope footpoint and is thus expected to help identify the footpoint. We analyse this arc-shaped structure, which we name as "sunspot scar", in a CME event on 2012 July 12 and in two CME events in observationally-inspired MHD simulations performed by OHM and MPI-AMRVAC. The sunspot scar has a more inclined magnetic field with a weaker vertical component and a stronger horizontal component relative to that in the surrounding umbra and manifests as a light bridge in the white light passband. The hot field lines anchored in the sunspot scar are spatially at the transition between the flux rope and the background coronal loops, and temporally in the process of the slipping reconnection which builds up the flux rope. The sunspot scar and its related light bridge mark the edge of the CME flux rope footpoint, and especially, the edge of the pre-eruptive flux rope footpoint in the framework of "pre-eruptive structures being flux ropes". Therefore, they provide a new perspective for the identification of pre-eruptive and CME flux rope footpoints, and also new methods for studying the properties and evolution of pre-eruptive structures and CMEs with photospheric observations only. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Comments: 25 pages, 14 figures, accepted for publication in Astronomy & Astrophysics

Deciphering The Slow-rise Precursor of a Major Coronal Mass Ejection

Authors: X. Cheng, C. Xing, G. Aulanier, S. K. Solanki, H. Peter, M. D. Ding

Abstract: Coronal mass ejections (CMEs) are explosive plasma phenomena prevalently occurring on the Sun and probably on other magnetically active stars. However, how their pre-eruptive configuration evolves toward the main explosion remains elusive. Here, based on comprehensive observations of a long-duration precursor in an event on 2012 March 13, we determine that the heating and slow rise of the pre-erup… ▽ More Coronal mass ejections (CMEs) are explosive plasma phenomena prevalently occurring on the Sun and probably on other magnetically active stars. However, how their pre-eruptive configuration evolves toward the main explosion remains elusive. Here, based on comprehensive observations of a long-duration precursor in an event on 2012 March 13, we determine that the heating and slow rise of the pre-eruptive hot magnetic flux rope (MFR) are achieved through a precursor reconnection located above cusp-shaped high-temperature precursor loops. It is observed that the hot MFR threads are built up continually with their middle initially showing an "M" shape and then being separated from the cusp of precursor loops, causing the slow rise of the entire MFR. The slow rise in combination with thermal-dominated hard X-ray source concentrated at the top of the precursor loops shows that the precursor reconnection is much weaker than the flare reconnection of the main eruption. We also perform a three-dimensional magnetohydrodynamics simulation that reproduces the early evolution of the MFR transiting from the slow to fast rise. It is also disclosed that it is the magnetic tension force pertinent to "M"-shaped threads that drives the slow rise, which, however, evolves into a magnetic pressure gradient dominated regime responsible for the rapid-acceleration eruption. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Comments: 18 pages, 12 figures (7 in main and 5 in appendix), accepted for publication in ApJ Letters

Formation of an observed eruptive flux rope above the torus instability threshold through tether-cutting magnetic reconnection

Authors: Avijeet Prasad, Sanjay Kumar, Alphonse C. Sterling, Ronald L. Moore, Guillaume Aulanier, R. Bhattacharyya, Qiang Hu

Abstract: Erupting magnetic flux ropes (MFRs) play a crucial role in producing solar flares. However, the formation of erupting MFRs in complex coronal magnetic configurations and their subsequent evolution in the flaring events are not fully understood. We performed an MHD simulation of active region NOAA 12241 to understand the formation of a rising MFR during the onset of an M6.9 flare on 2014 December 1… ▽ More Erupting magnetic flux ropes (MFRs) play a crucial role in producing solar flares. However, the formation of erupting MFRs in complex coronal magnetic configurations and their subsequent evolution in the flaring events are not fully understood. We performed an MHD simulation of active region NOAA 12241 to understand the formation of a rising MFR during the onset of an M6.9 flare on 2014 December 18, around 21:41 UT. The MHD simulation was initialised with an extrapolated non-force-free magnetic field generated from the photospheric vector magnetogram of the active region taken a few minutes before the flare. The initial magnetic field topology displays a pre-existing sheared arcade enveloping the polarity inversion line. The simulated dynamics exhibit the movement of the oppositely directed legs of the sheared arcade field lines towards each other due to the converging Lorentz force, resulting in the onset of tether-cutting magnetic reconnection that produces an underlying flare arcade and flare ribbons. Concurrently, an MFR above the flare arcade develops inside the sheared arcade and shows a rising motion. The MFR is found to be formed in a torus-unstable region, thereby explaining its eruptive nature. Interestingly, the location and rise of the rope are in good agreement with the corresponding observations seen in EUV channels. Furthermore, the foot points of the simulation's flare arcade match well with the location of the observed parallel ribbons of the flare. The presented simulation supports the development of the MFR by the tether-cutting magnetic reconnection inside the sheared coronal arcade during flare onset. The MFR is then found to extend along the polarity inversion line (PIL) through slip-running reconnection. The MFR's eruptive nature is ascribed both to its formation in the torus-unstable region and also to the runaway tether-cutting reconnection. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Comments: 12 pages, 8 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 677, A43 (2023)

EUV fine structure and variability associated with coronal rain revealed by Solar Orbiter/EUI HRIEUV and SPICE

Authors: P. Antolin, A. Dolliou, F. Auchère, L. P. Chitta, S. Parenti, D. Berghmans, R. Aznar Cuadrado, K. Barczynski, S. Gissot, L. Harra, Z. Huang, M. Janvier, E. Kraaikamp, D. M. Long, S. Mandal, H. Peter, L. Rodriguez, U. Schühle, P. J. Smith, S. K. Solanki, K. Stegen, L. Teriaca, C. Verbeeck, M. J. West, A. N. Zhukov , et al. (12 additional authors not shown)

Abstract: Coronal rain is the most dramatic cooling phenomenon of the solar corona and an essential diagnostic tool for the coronal heating properties. A puzzling feature of the solar corona, besides the heating, is its EUV filamentary structure and variability. We aim to identify observable features of the TNE-TI scenario underlying coronal rain at small and large spatial scales, to understand the role it… ▽ More Coronal rain is the most dramatic cooling phenomenon of the solar corona and an essential diagnostic tool for the coronal heating properties. A puzzling feature of the solar corona, besides the heating, is its EUV filamentary structure and variability. We aim to identify observable features of the TNE-TI scenario underlying coronal rain at small and large spatial scales, to understand the role it plays in the solar corona. We use EUV datasets at unprecedented spatial resolution of ~240 km from EUI/HRIEUV and SPICE of Solar Orbiter from the spring 2022 perihelion. EUV absorption features produced by coronal rain are detected at scales as small as 260 km. As the rain falls, heating and compression is produced immediately downstream, leading to a small EUV brightening accompanying the fall and producing a "fireball" phenomenon. Just prior to impact, a flash-like EUV brightening downstream of the rain, lasting a few minutes is observed for the fastest events. For the first time, we detect the atmospheric response to the rain's impact on the chromosphere and consists of upward propagating rebound shocks and flows partly reheating the loop. The observed widths of the rain clumps are 500 +- 200 km. They exhibit a broad velocity distribution of 10 - 150 km s^-1, peaking below 50 km s^-1. Coronal strands of similar widths are observed along the same loops co-spatial with cool filamentary structure, which we interpret as the CCTR. Matching with the expected cooling, prior to the rain appearance sequential loop brightenings are detected in gradually cooler lines from corona to chromospheric temperatures. Despite the large rain showers, most cannot be detected in AIA 171 in quadrature, indicating that LOS effects play a major role in coronal rain visibility. Still, AIA 304 and SPICE observations reveal that only a small fraction of the rain can be captured by HRIEUV. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: Astronomy & Astrophysics; 32 Pages, 24 Main Figures, Appendix

Journal ref: A&A 676, A112 (2023)

Ultra-high-resolution Observations of Persistent Null-point Reconnection in the Solar Corona

Authors: X. Cheng, E. R. Priest, H. T. Li, J. Chen, G. Aulanier, L. P. Chitta, Y. L. Wang, H. Peter, X. S. Zhu, C. Xing, M. D. Ding, S. K. Solanki, D. Berghmans, L. Teriaca, R. Aznar Cuadrado, A. N. Zhukov, Y. Guo, D. Long, L. Harra, P. J. Smith, L. Rodriguez, C. Verbeeck, K. Barczynski, S. Parenti

Abstract: Magnetic reconnection is a key mechanism involved in solar eruptions and is also a prime possibility to heat the low corona to millions of degrees. Here, we present ultra-high-resolution extreme ultraviolet observations of persistent null-point reconnection in the corona at a scale of about 390 km over one hour observations of the Extreme-Ultraviolet Imager on board Solar Orbiter spacecraft. The o… ▽ More Magnetic reconnection is a key mechanism involved in solar eruptions and is also a prime possibility to heat the low corona to millions of degrees. Here, we present ultra-high-resolution extreme ultraviolet observations of persistent null-point reconnection in the corona at a scale of about 390 km over one hour observations of the Extreme-Ultraviolet Imager on board Solar Orbiter spacecraft. The observations show formation of a null-point configuration above a minor positive polarity embedded within a region of dominant negative polarity near a sunspot. The gentle phase of the persistent null-point reconnection is evidenced by sustained point-like high-temperature plasma (about 10 MK) near the null-point and constant outflow blobs not only along the outer spine but also along the fan surface. The blobs appear at a higher frequency than previously observed with an average velocity of about 80 km/s and life-times of about 40 s. The null-point reconnection also occurs explosively but only for 4 minutes, its coupling with a mini-filament eruption generates a spiral jet. These results suggest that magnetic reconnection, at previously unresolved scales, proceeds continually in a gentle and/or explosive way to persistently transfer mass and energy to the overlying corona. △ Less

Submitted 18 April, 2023; originally announced April 2023.

Comments: 27 pages, 7 figures

Quiet Sun flux rope formation via incomplete Taylor relaxation

Authors: Rebecca Robinson, Guillaume Aulanier, Mats Carlsson

Abstract: Low-altitude twisted magnetic fields may be relevant to atmospheric heating in the quiet Sun, but the exact role, topology, and formation of these twisted fields remains to be studied. We investigate the formation and evolution of a preflare flux rope in a stratified, 3D MHD simulation. One puzzle is that this modelled flux rope does not form by the usual mechanisms at work in larger flares such a… ▽ More Low-altitude twisted magnetic fields may be relevant to atmospheric heating in the quiet Sun, but the exact role, topology, and formation of these twisted fields remains to be studied. We investigate the formation and evolution of a preflare flux rope in a stratified, 3D MHD simulation. One puzzle is that this modelled flux rope does not form by the usual mechanisms at work in larger flares such as flux emergence, flux cancellation, or tether-cutting. Using Lagrangian markers to trace representative field lines, we follow the spatiotemporal evolution of the flux rope. We isolate flux bundles associated with reconnecting field line pairs by focusing on thin current sheets within the flux system. We also analyze the time-varying distribution of the force-free parameter as the rope relaxes. Lastly, we compare different seeding methods for magnetic fields and discuss their relevance. We show that the modeled flux rope is gradually built from coalescing, current-carrying flux tubes. This occurs through a series of component reconnections that are driven by flows in the underlying convection zone. These reconnections lead to an inverse cascade of helicity from small to larger scales. We also find that the system attempts to relax toward a linear force-free field, but that the convective drivers and eventual nanoflare prevent full relaxation. Using a self-consistently driven simulation of a nanoflare event, we show for the first time an inverse helicity cascade tending toward a Taylor relaxation in the Sun's corona, resulting in a well-ordered flux rope that later reconnects with surrounding fields. This provides clues toward understanding the buildup of nanoflare events in the quiet Sun through incomplete Taylor relaxations when no flux emergence or cancellation is observed. △ Less

Submitted 21 March, 2023; originally announced March 2023.

Journal ref: A&A 673, A79 (2023)

First Perihelion of EUI on the Solar Orbiter mission

Authors: D. Berghmans, P. Antolin, F. Auchère, R. Aznar Cuadrado, K. Barczynski, L. P. Chitta, S. Gissot, L. Harra, Z. Huang, M. Janvier, E. Kraaikamp, D. M. Long, S. Mandal, M. Mierla, S. Parenti, H. Peter, L. Rodriguez, U. Schühle, P. J. Smith, S. K. Solanki, K. Stegen, L. Teriaca, C. Verbeeck, M. J. West, A. N. Zhukov , et al. (12 additional authors not shown)

Abstract: Context. The Extreme Ultraviolet Imager (EUI), onboard Solar Orbiter consists of three telescopes: the two High Resolution Imagers in EUV (HRIEUV) and in Lyman-α (HRILya), and the Full Sun Imager (FSI). Solar Orbiter/EUI started its Nominal Mission Phase on 2021 November 27. Aims. EUI images from the largest scales in the extended corona off limb, down to the smallest features at the base of the c… ▽ More Context. The Extreme Ultraviolet Imager (EUI), onboard Solar Orbiter consists of three telescopes: the two High Resolution Imagers in EUV (HRIEUV) and in Lyman-α (HRILya), and the Full Sun Imager (FSI). Solar Orbiter/EUI started its Nominal Mission Phase on 2021 November 27. Aims. EUI images from the largest scales in the extended corona off limb, down to the smallest features at the base of the corona and chromosphere. EUI is therefore a key instrument for the connection science that is at the heart of the Solar Orbiter mission science goals. Methods. The highest resolution on the Sun is achieved when Solar Orbiter passes through the perihelion part of its orbit. On 2022 March 26, Solar Orbiter reached for the first time a distance to the Sun close to 0.3 au. No other coronal EUV imager has been this close to the Sun. Results. We review the EUI data sets obtained during the period 2022 March-April, when Solar Orbiter quickly moved from alignment with the Earth (2022 March 6), to perihelion (2022 March 26), to quadrature with the Earth (2022 March 29). We highlight the first observational results in these unique data sets and we report on the in-flight instrument performance. Conclusions. EUI has obtained the highest resolution images ever of the solar corona in the quiet Sun and polar coronal holes. Several active regions were imaged at unprecedented cadences and sequence durations. We identify in this paper a broad range of features that require deeper studies. Both FSI and HRIEUV operate at design specifications but HRILya suffered from performance issues near perihelion. We conclude emphasising the EUI open data policy and encouraging further detailed analysis of the events highlighted in this paper. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Journal ref: A&A 675, A110 (2023)

From incoherent field to coherent reconnection: understanding convection-driven coronal heating in the quiet Sun

Authors: Rebecca Robinson, Mats Carlsson, Guillaume Aulanier

Abstract: Magnetic reconnection in the quiet Sun is a phenomenon that is consistently observed, and it has recently become feasible to simulate via 3D numerical models of realistically stratified and convection-driven reconnection. We aim to illustrate ways by which quiet Sun fields may contribute to solar atmospheric heating via magnetic reconnection that is driven by convective motion. We also aim to comp… ▽ More Magnetic reconnection in the quiet Sun is a phenomenon that is consistently observed, and it has recently become feasible to simulate via 3D numerical models of realistically stratified and convection-driven reconnection. We aim to illustrate ways by which quiet Sun fields may contribute to solar atmospheric heating via magnetic reconnection that is driven by convective motion. We also aim to compare our stratified model to earlier idealized coronal models in terms of reconnection drivers and topological conditions. We analyzed a simulation of the quiet Sun in which a complex coronal magnetic field is self-consistently driven by the underlying convection. We employed a selection of Lagrangian markers to trace the spatiotemporal behavior of specific magnetic features that are relevant to magnetic reconnection and atmospheric heating. A large-scale reconnection-driven heating event occurs in the simulated corona, in a flattened X-shaped feature characterized by a weak field and high current. Relevant features include a smooth overlying horizontal field, an arcade, and a horizontal flux rope which eventually reconnect with the overlying field, raising coronal plasma temperatures up to 1.47 MK. We find that our results are in good agreement with idealized coronal flare models, which demonstrates that the same physical concepts are valid. We also find that the reconnecting flux rope and arcade are neither formed by any obvious coherent flux emergence, nor by any ordered photospheric motion or flux cancellation. Instead, they seem to develop merely from the self-consistent convective driving of pre-existing tangled field lines. This gradual ordering suggests an inverse cascade of magnetic helicity via smaller reconnection events, located at or above photospheric flux concentrations. We suggest that this case is representative of heating events that may be ubiquitous in the real quiet Sun. △ Less

Submitted 15 November, 2022; originally announced November 2022.

Journal ref: A&A 668, A177 (2022)

Filament Leg--Leg Reconnection as a Source of Prominent Supra-Arcade Downflows

Authors: Jaroslav Dudik, Guillaume Aulanier, Jana Kasparova, Marian Karlicky, Alena Zemanova, Juraj Lorincik, Miloslav Druckmuller

Abstract: We report on interaction of the legs of the erupting filament of 2012 August 31 and associated prominent supra-arcade downflows (P-SADs) as observed by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory. We employ a number of image processing techniques to enhance weak interacting features. As the filament erupts, both legs stretch outwards. The positive-polarity leg also untw… ▽ More We report on interaction of the legs of the erupting filament of 2012 August 31 and associated prominent supra-arcade downflows (P-SADs) as observed by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory. We employ a number of image processing techniques to enhance weak interacting features. As the filament erupts, both legs stretch outwards. The positive-polarity leg also untwists and splits into two parts. The first part runs into the conjugate (negative-polarity) leg, tearing it apart. The second part then converges into the remnant of the conjugate leg, after which both weaken and finally disappear. All these episodes of interaction of oppositely-oriented filament legs are followed by appearance of P-SADs, seen in the on-disk projection to be shaped as loop-tops, along with many weaker SADs. All SADs are preceded by hot supra-arcade downflowing loops. This observed evolution is consistent with the three-dimensional rr-rf (leg-leg) reconnection, where the erupting flux rope reconnects with itself. In our observations, as well as in some models, the reconnection in this geometry is found to be long-lasting. It plays a substantial role in the evolution of the flux rope of the erupting filament and leads to prominent supra-arcade downflows. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: 9 pages, 5 figures Accepted for publication in the ApJL

The European Solar Telescope

Authors: C. Quintero Noda, R. Schlichenmaier, L. R. Bellot Rubio, M. G. Löfdahl, E. Khomenko, J. Jurcak, J. Leenaarts, C. Kuckein, S. J. González Manrique, S. Gunar, C. J. Nelson, J. de la Cruz Rodríguez, K. Tziotziou, G. Tsiropoula, G. Aulanier, M. Collados, the EST team

Abstract: The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the European solar physics community during the construction and operation of state-of-the-art solar telescopes operating in visible and near-infrared wavelengths: the Sw… ▽ More The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the European solar physics community during the construction and operation of state-of-the-art solar telescopes operating in visible and near-infrared wavelengths: the Swedish 1m Solar Telescope (SST), the German Vacuum Tower Telescope (VTT) and GREGOR, the French Télescope Héliographique pour l'Étude du Magnétisme et des Instabilités Solaires (THÉMIS), and the Dutch Open Telescope (DOT). With its 4.2 m primary mirror and an open configuration, EST will become the most powerful European ground-based facility to study the Sun in the coming decades in the visible and near-infrared bands. EST uses the most innovative technological advances: the first adaptive secondary mirror ever used in a solar telescope, a complex multi-conjugate adaptive optics with deformable mirrors that form part of the optical design in a natural way, a polarimetrically compensated telescope design that eliminates the complex temporal variation and wavelength dependence of the telescope Mueller matrix, and an instrument suite containing several (etalon-based) tunable imaging spectropolarimeters and several integral field unit spectropolarimeters. This publication summarises some fundamental science questions that can be addressed with the telescope, together with a complete description of its major subsystems. △ Less

Submitted 22 July, 2022; originally announced July 2022.

Comments: 38 pages, 24 figures

Journal ref: A&A 666, A21 (2022)

Empirical atmosphere model in a mini flare during magnetic reconnection

Authors: Brigitte Schmieder, Reetika Joshi, Ramesh Chandra, Guillaume Aulanier, Akiko Tei, Petr Heinzel, James Tomin, Nicole Vilmer, Veronique Bommier

Abstract: A spatio-temporal analysis of IRIS spectra of MgII, CII, and SiIV ions allows us to study the dynamics and the stratification of the flare atmosphere along the line of sight during the magnetic reconnection phase at the jet base. Strong asymmetric MgII and CII line profiles with extended blue wings observed at the reconnection site are interpreted by the presence of two chromospheric temperature c… ▽ More A spatio-temporal analysis of IRIS spectra of MgII, CII, and SiIV ions allows us to study the dynamics and the stratification of the flare atmosphere along the line of sight during the magnetic reconnection phase at the jet base. Strong asymmetric MgII and CII line profiles with extended blue wings observed at the reconnection site are interpreted by the presence of two chromospheric temperature clouds: one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Doppler shift (around 36 km/s). Simultaneously at the same location a mini flare was observed with strong emission in multi temperatures (AIA), in several spectral IRIS lines (e.g. Oiv and Siiv, Mgii), absorption of identified chromospheric lines in Siiv line profile, enhancement of the Balmer continuum and X-ray emission by FERMI/GBM. With the standard thick-target flare model we calculate the energy of non thermal electrons observed by FERMI and compare it to the energy radiated by the Balmer continuum emission. We show that the low energy input by non thermal electrons above 20 keV was still sufficient to produce the excess of Balmer continuum. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Comments: 6 pages, 4 figures, Accepted for publications in HVAR proceedings

Saddle-shaped solar flare arcades

Authors: Juraj Lörinčík, Jaroslav Dudík, Guillaume Aulanier

Abstract: Arcades of flare loops form as a consequence of magnetic reconnection powering solar flares and eruptions. We analyse the morphology and evolution of flare arcades that formed during five well-known eruptive flares. We show that the arcades have a common saddle-like shape. The saddles occur despite the fact that the flares were of different classes (C to X), occurred in different magnetic environm… ▽ More Arcades of flare loops form as a consequence of magnetic reconnection powering solar flares and eruptions. We analyse the morphology and evolution of flare arcades that formed during five well-known eruptive flares. We show that the arcades have a common saddle-like shape. The saddles occur despite the fact that the flares were of different classes (C to X), occurred in different magnetic environments, and were observed in various projections. The saddles are related to the presence of longer, relatively-higher, and inclined flare loops, consistently observed at the ends of the arcades, which we term `cantles'. Our observations indicate that cantles typically join straight portions of flare ribbons with hooked extensions of the conjugate ribbons. The origin of the cantles is investigated in stereoscopic observations of the 2011 May 9 eruptive flare carried out by the Atmospheric Imaging Assembly (AIA) and Extreme Ultraviolet Imager (EUVI). The mutual separation of the instruments led to ideal observational conditions allowing for simultaneous analysis of the evolving cantle and the underlying ribbon hook. Based on our analysis we suggest that the formation of one of the cantles can be explained by magnetic reconnection between the erupting structure and its overlying arcades. We propose that the morphology of flare arcades can provide information about the reconnection geometries in which the individual flare loops originate. △ Less

Submitted 22 February, 2021; originally announced February 2021.

Comments: 9 pages, 5 figures

Multi thermal atmosphere of a mini solar flare during magnetic reconnection observed with IRIS

Authors: Reetika Joshi, Brigitte Schmieder, Akiko Tei, Guillaume Aulanier, Juraj Lörinčík, Ramesh Chandra, Petr Heinzel

Abstract: The Interface Region Imaging Spectrograph(IRIS) with its high spatial and temporal resolution brings exceptional plasma diagnostics of solar chromospheric and coronal activity during magnetic reconnection. The aim of this work is to study the fine structure and dynamics of the plasma at a jet base forming a mini flare between two emerging magnetic fluxes (EMFs) observed with IRIS and the Solar Dyn… ▽ More The Interface Region Imaging Spectrograph(IRIS) with its high spatial and temporal resolution brings exceptional plasma diagnostics of solar chromospheric and coronal activity during magnetic reconnection. The aim of this work is to study the fine structure and dynamics of the plasma at a jet base forming a mini flare between two emerging magnetic fluxes (EMFs) observed with IRIS and the Solar Dynamics Observatory (SDO) instruments. We proceed to a spatio-temporal analysis of IRIS spectra observed in the spectral ranges of Mg II, C II, and Si IV ions. Doppler velocities from Mg II lines are computed by using a cloud model technique. Strong asymmetric Mg II and C II line profiles with extended blue wings observed at the reconnection site (jet base) are interpreted by the presence of two chromospheric temperature clouds, one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Dopplershift (around 36 km/s). Simultaneously at the same location (jet base), strong emission of several transition region lines (e.g. O IV and Si IV), emission of the Mg II triplet lines of the Balmer-continuum and absorption of identified chromospheric lines in Si IV broad profiles have been observed and analysed. Such observations of IRIS line and continuum emissions allow us to propose a stratification model for the white-light mini flare atmosphere with multiple layers of different temperatures along the line of sight, in a reconnection current sheet. It is the first time that we could quantify the fast speed (possibly Alfvénic flows) of cool clouds ejected perpendicularly to the jet direction by using the cloud model technique. We conjecture that the ejected clouds come from plasma which was trapped between the two EMFs before reconnection or be caused by chromospheric-temperature (cool) upflow material like in a surge, during reconnection △ Less

Submitted 29 October, 2020; originally announced October 2020.

Comments: 20 pages, 17 figures, Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 645, A80 (2021)

Decoding the Pre-Eruptive Magnetic Field Configurations of Coronal Mass Ejections

Authors: S. Patsourakos, A. Vourlidas, T. Török, B. Kliem, S. K. Antiochos, V. Archontis, G. Aulanier, X. Cheng, G. Chintzoglou, M. K. Georgoulis, L. M. Green, J. E. Leake, R. Moore, A. Nindos, P. Syntelis, S. L. Yardley, V. Yurchyshyn, J. Zhang

Abstract: A clear understanding of the nature of the pre-eruptive magnetic field configurations of Coronal Mass Ejections (CMEs) is required for understanding and eventually predicting solar eruptions. Only two, but seemingly disparate, magnetic configurations are considered viable; namely, sheared magnetic arcades (SMA) and magnetic flux ropes (MFR). They can form via three physical mechanisms (flux emerge… ▽ More A clear understanding of the nature of the pre-eruptive magnetic field configurations of Coronal Mass Ejections (CMEs) is required for understanding and eventually predicting solar eruptions. Only two, but seemingly disparate, magnetic configurations are considered viable; namely, sheared magnetic arcades (SMA) and magnetic flux ropes (MFR). They can form via three physical mechanisms (flux emergence, flux cancellation, helicity condensation) . Whether the CME culprit is an SMA or an MFR, however, has been strongly debated for thirty years. We formed an International Space Science Institute (ISSI) team to address and resolve this issue and report the outcome here. We review the status of the field across modeling and observations, identify the open and closed issues, compile lists of SMA and MFR observables to be tested against observations and outline research activities to close the gaps in our current understanding. We propose that the combination of multi-viewpoint multi-thermal coronal observations and multi-height vector magnetic field measurements is the optimal approach for resolving the issue conclusively. We demonstrate the approach using MHD simulations and synthetic coronal images. Our key conclusion is that the differentiation of pre-eruptive configurations in terms of SMAs and MFRs seems artificial. Both observations and modeling can be made consistent if the pre-eruptive configuration exists in a hybrid state that is continuously evolving from an SMA to an MFR. Thus, the 'dominant' nature of a given configuration will largely depend on its evolutionary stage (SMA-like early-on, MFR-like near the eruption). △ Less

Submitted 20 October, 2020; originally announced October 2020.

Comments: Space Science Reviews, accepted for publication

Imaging evidence for solar wind outflows originating from a CME footpoint

Authors: Juraj Lörinčík, Jaroslav Dudík, Guillaume Aulanier, Brigitte Schmieder, Leon Golub

Abstract: We report on the Atmospheric Imaging Assembly (AIA) observations of plasma outflows originating in a coronal dimming during the 2015 April 28th filament eruption. After the filament started to erupt, two flare ribbons formed, one of which had a well-visible hook enclosing a core (twin) dimming region. Along multiple funnels located in this dimming, a motion of plasma directed outwards started to b… ▽ More We report on the Atmospheric Imaging Assembly (AIA) observations of plasma outflows originating in a coronal dimming during the 2015 April 28th filament eruption. After the filament started to erupt, two flare ribbons formed, one of which had a well-visible hook enclosing a core (twin) dimming region. Along multiple funnels located in this dimming, a motion of plasma directed outwards started to be visible in the 171 and 193 filter channels of the instrument. In time-distance diagrams, this motion generated a strip-like pattern, which lasted for more than five hours and which characteristics did not change along the funnel. We therefore suggest the motion to be a signature of outflows corresponding to velocities ranging between $\approx70$ and 140 km s$^{-1}$. Interestingly, the pattern of the outflows as well as their velocities were found to be similar to those we observed in a neighboring ordinary coronal hole. Therefore, the outflows were most likely a signature of a CME-induced slow solar wind flowing along the open-field structures rooted in the dimming region. Further, the evolution of the hook encircling the dimming region was examined in the context of the latest predictions imposed for the three-dimensional magnetic reconnection. The observations indicate that the filament's footpoints were, during their transformation to the dimming region, reconnecting with surrounding canopies. To our knowledge, our observations present the first imaging evidence for outflows of plasma from a dimming region. △ Less

Submitted 6 November, 2020; v1 submitted 8 October, 2020; originally announced October 2020.

The Solar Orbiter Science Activity Plan: translating solar and heliospheric physics questions into action

Authors: I. Zouganelis, A. De Groof, A. P. Walsh, D. R. Williams, D. Mueller, O. C. St Cyr, F. Auchere, D. Berghmans, A. Fludra, T. S. Horbury, R. A. Howard, S. Krucker, M. Maksimovic, C. J. Owen, J. Rodriiguez-Pacheco, M. Romoli, S. K. Solanki, C. Watson, L. Sanchez, J. Lefort, P. Osuna, H. R. Gilbert, T. Nieves-Chinchilla, L. Abbo, O. Alexandrova , et al. (160 additional authors not shown)

Abstract: Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operat… ▽ More Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate? (2) How do solar transients drive heliospheric variability? (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere? (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans (SOOPs), resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Comments: 20 pages, 1 figure, accepted by Astronomy & Astrophysics

Journal ref: A&A 642, A3 (2020)

The role of small-scale surface motions in the transfer of twist to a solar jet from a remote stable flux rope

Authors: Reetika Joshi, Brigitte Schmieder, Guillaume Aulanier, Véronique Bommier, Ramesh Chandra

Abstract: Jets often have a helical structure containing ejected plasma that is both hot and also cooler and denser than the corona. Various mechanisms have been proposed to explain how jets are primarily attributed to a magnetic reconnection between the emergence of magnetic flux and environment or that of twisted photospheric motions that bring the system into a state of instability. Multi-wavelength obse… ▽ More Jets often have a helical structure containing ejected plasma that is both hot and also cooler and denser than the corona. Various mechanisms have been proposed to explain how jets are primarily attributed to a magnetic reconnection between the emergence of magnetic flux and environment or that of twisted photospheric motions that bring the system into a state of instability. Multi-wavelength observations of a twisted jet observed with AIA and IRIS were used to understand how the twist was injected into the jet. We followed the magnetic history of the active region based on the analysis of HMI vector magnetic field computed with the UNNOFIT code. This region is the result of the collapse of two emerging magnetic fluxes (EMFs) overlaid by arch filament systems that have been well-observed with AIA, IRIS, and NVST in H-alpha. In the magnetic field maps, we found evidence of the pattern of a long sigmoidal flux rope (FR) along the polarity inversion line between the two EMFs, which is the site of the reconnection. Before the jet, an extension of the FR was present and a part of it was detached and formed a small bipole with a bald patch (BP) region, which dynamically became an X-current sheet over the dome of one EMF where the reconnection took place. At the time of the reconnection, the Mg II spectra exhibited a strong extension of the blue wing that is decreasing over a distance of 10 Mm (from -300 km/s to a few km/s). This is the signature of the transfer of the twist to the jet. A comparison with numerical magnetohydrodynamics (MHD) simulations confirms the existence of the long FR. We conjecture that there is a transfer of twist to the jet during the extension of the FR to the reconnection site without FR eruption. There connection would start in the low atmosphere in the BP reconnection region and extend at an X-point along the current sheet formed above. △ Less

Submitted 31 August, 2020; v1 submitted 16 August, 2020; originally announced August 2020.

Comments: 22 pages, 13 figures, Astronomy and Astrophysics

Journal ref: A&A 642, A169 (2020)

A case-study of multi-temperature coronal jets for emerging flux MHD models

Authors: Reetika Joshi, Ramesh Chandra, Brigitte Schmieder, Fernando Moreno-Insertis, Guillaume Aulanier, Daniel Nóbrega-Siverio, Pooja Devi

Abstract: Context: Hot coronal jets are a basic observed feature of the solar atmosphere whose physical origin is still being actively debated. Aims: We study six recurrent jets occurring in the active region NOAA 12644 on April 04, 2017. They are observed in all the hot filters of AIA as well as cool surges in IRIS slit-jaw high spatial and temporal resolution images. Methods: The AIA filters allow us to s… ▽ More Context: Hot coronal jets are a basic observed feature of the solar atmosphere whose physical origin is still being actively debated. Aims: We study six recurrent jets occurring in the active region NOAA 12644 on April 04, 2017. They are observed in all the hot filters of AIA as well as cool surges in IRIS slit-jaw high spatial and temporal resolution images. Methods: The AIA filters allow us to study the temperature and the emission measure of the jets using the filter ratio method. We study the pre-jet phases by analyzing the intensity oscillations at the base of the jets with the wavelet technique. Results: A fine co-alignment of the AIA and IRIS data shows that the jets are initiated at the top of a canopy-like, double-chambered structure with cool emission on one side and hot emission in the other. The hot jets are collimated in the hot temperature filters, have high velocities (around 250 km/s) and accompanied by the cool surges and ejected kernels both moving at about 45 km/s. In the pre-phase of the jets, at their base we find quasi-periodic intensity oscillations in phase with small ejections; they have a period between 2 and 6 minutes and are reminiscent of acoustic or MHD waves. Conclusions: This series of jets and surges provides a good case-study to test the 2D and 3D magnetohydrodynamic (MHD) models that result from magnetic flux emergence. The double-chambered structure found in the observations corresponds to the cold and hot loop regions found in the models beneath the current sheet that contains the reconnection site. The cool surge with kernels is comparable with the cool ejection and plasmoids that naturally appear in the models. △ Less

Submitted 12 May, 2020; originally announced May 2020.

Comments: 12 Pages, 11 Figures

Journal ref: A&A 639, A22 (2020)

Electric current evolution at the footpoints of solar eruptions

Authors: Krzysztof Barczynski, Guillaume Aulanier, Miho Janvier, Brigitte Schmieder, Sophie Masson

Abstract: Electric currents play a critical role in the triggering of solar flares and their evolution. The aim of the present paper is to test whether the surface electric current has a surface or subsurface fixed source as predicts the circuit approach of flare physics, or is the response of the surface magnetic field to the evolution of the coronal magnetic field as the MHD approach proposes. Out of all… ▽ More Electric currents play a critical role in the triggering of solar flares and their evolution. The aim of the present paper is to test whether the surface electric current has a surface or subsurface fixed source as predicts the circuit approach of flare physics, or is the response of the surface magnetic field to the evolution of the coronal magnetic field as the MHD approach proposes. Out of all 19 X-class flares as observed by SDO from 2011 to 2016 near the disk center, we analyzed the only 9 eruptive flares for which clear ribbon-hooks were identifiable. Flare ribbons with hooks are considered to be the footprints of eruptive flux ropes in MHD flare models. For the first time, fine measurements of time-evolution of electric currents inside the hooks in the observations as well as in the OHM 3D MHD simulation are performed. Our analysis shows a decrease of the electric current in the area surrounded by the ribbon hooks during and after the eruption. We interpret the decrease of the electric currents as due to the expansion of the flux rope in the corona during the eruption. Our analysis brings a new contribution to the standard flare model in 3D. △ Less

Submitted 16 April, 2020; originally announced April 2020.

Comments: 27 pages, 10 figures; Accepted for publication in ApJ (13 April 2020)

Energy and helicity fluxes in line-tied eruptive simulations

Authors: Luis Linan, Étienne Pariat, Guillaume Aulanier, Kostas Moraitis, Gherardo Valori

Abstract: Based on a decomposition of the magnetic field into potential and nonpotential components, magnetic energy and relative helicity can both also be decomposed into two quantities: potential and free energies, and volume-threading and current-carrying helicities. In this study, we perform a coupled analysis of their behaviors in a set of parametric 3D magnetohydrodynamic (MHD) simulations of solar-li… ▽ More Based on a decomposition of the magnetic field into potential and nonpotential components, magnetic energy and relative helicity can both also be decomposed into two quantities: potential and free energies, and volume-threading and current-carrying helicities. In this study, we perform a coupled analysis of their behaviors in a set of parametric 3D magnetohydrodynamic (MHD) simulations of solar-like eruptions. We present the general formulations for the time-varying components of energy and helicity in resistive MHD. We calculated them numerically with a specific gauge, and compared their behaviors in the numerical simulations, which differ from one another by their imposed boundary-driving motions. Thus, we investigated the impact of different active regions surface flows on the development of the energy and helicity-related quantities. Despite general similarities in their overall behaviors, helicities and energies display different evolutions that cannot be explained in a unique framework. While the energy fluxes are similar in all simulations, the physical mechanisms that govern the evolution of the helicities are markedly distinct from one simulation to another: the evolution of volume-threading helicity can be governed by boundary fluxes or helicity transfer, depending on the simulation. The eruption takes place for the same value of the ratio of the current-carrying helicity to the total helicity in all simulations. However, our study highlights that this threshold can be reached in different ways, with different helicity-related processes dominating for different photospheric flows. This means that the details of the pre-eruptive dynamics do not influence the eruption-onset helicity-related threshold. Nevertheless, the helicity-flux dynamics may be more or less efficient in changing the time required to reach the onset of the eruption. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Comments: 18 pages, 9 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 636, A41 (2020)

Observation of all pre- and post-reconnection structures involved in three-dimensional reconnection geometries in solar eruptions

Authors: Jaroslav Dudik, Juraj Lorincik, Guillaume Aulanier, Alena Zemanova, Brigitte Schmieder

Abstract: We report on observations of the two newly-identified reconnection geometries involving erupting flux ropes. In 3D, a flux rope can reconnect either with a surrounding coronal arcade (recently named "ar-rf" reconnection) or with itself ("rr-rf" reconnection), and both kinds of reconnection create a new flux rope field line and a flare loop. For the first time, we identify all four constituents of… ▽ More We report on observations of the two newly-identified reconnection geometries involving erupting flux ropes. In 3D, a flux rope can reconnect either with a surrounding coronal arcade (recently named "ar-rf" reconnection) or with itself ("rr-rf" reconnection), and both kinds of reconnection create a new flux rope field line and a flare loop. For the first time, we identify all four constituents of both reconnections in a solar eruptive event, the filament eruption of 2011 June 07 observed by SDO/AIA. The ar-rf reconnection manifests itself as shift of one leg of the filament by more than 25" northward. At its previous location, a flare arcade is formed, while the new location of the filament leg previously corresponded to a footpoint of a coronal loop in 171 A. In addition, the evolution of the flare ribbon hooks is also consistent with the occurrence of ar--rf reconnection as predicted by MHD simulations. Specifically, the growing hook sweeps footpoints of preeruptive coronal arcades, and these locations become inside the hook. Furthermore, the rr-rf reconnection occurs during the peak phase above the flare arcade, in an apparently X-type geometry involving a pair of converging bright filament strands in the erupting filament. A new flare loop forms near the leg of one of the strands, while a bright blob, representing a remnant of the same strand, is seen ascending into the erupting filament. All together, these observations vindicate recent predictions of the 3D standard solar flare model. △ Less

Submitted 18 October, 2019; originally announced October 2019.

Comments: The Astrophysical Journal, accepted

Manifestations of three dimensional magnetic reconnection in an eruption of a quiescent filament: \\ Filament strands turning to flare loops

Authors: Juraj Lorincik, Jaroslav Dudik, Guillaume Aulanier

Abstract: We report on observations of conversion of bright filament strands into flare loops during 2012 August 31 filament eruption. Prior to the eruption, individual bright strands composing one of the legs of the filament were observed in the 171 A filter channel data of the Atmospheric Imaging Assembly. After the onset of the eruption, one of the hooked ribbons started to propagate and contract, sweepi… ▽ More We report on observations of conversion of bright filament strands into flare loops during 2012 August 31 filament eruption. Prior to the eruption, individual bright strands composing one of the legs of the filament were observed in the 171 A filter channel data of the Atmospheric Imaging Assembly. After the onset of the eruption, one of the hooked ribbons started to propagate and contract, sweeping footpoints of the bright filament strands as well as coronal loops located close by. Later on, hot flare loops appeared in regions swept by the hook, where the filament strands were rooted. Timing and localization of these phenomena suggest that they are caused by reconnection of field lines composing the filament at the hook, which, to our knowledge, has not been observed before. This process is not included in the standard flare model (CSHKP), as it does not address footpoints of erupting flux ropes and ribbon hooks. It has, however, been predicted using the recent three-dimensional extensions to the standard flare model. There, the erupting flux rope can reconnect with surrounding coronal arcades as the hooked extensions of current ribbons sweep its footpoints. This process results in formation of flare loops rooted in previous footpoints of the flux rope. Our observations of sweeping of filament footpoints are well described by this scenario. In all observed cases, all of the footpoints of the erupting filament became footpoints of flare loops. This process was observed to last for about 150 minutes, throughout the whole eruption. △ Less

Submitted 9 September, 2019; originally announced September 2019.

Comments: The Astrophysical Journal, accepted

Observations of a Footpoint Drift of an Erupting Flux Rope

Authors: Alena Zemanova, Jaroslav Dudik, Guillaume Aulanier, Julia K. Thalmann, Peter Gomory

Abstract: We analyze the imaging observations of an M-class eruptive flare of 2015 November, 4. The pre-eruptive H alpha filament was modelled by the non-linear force free field model, which showed that it consisted of two helical systems. Tether-cutting reconnection involving these two systems led to the formation of a hot sigmoidal loop structure rooted in a small hook that formed at the end of the flare… ▽ More We analyze the imaging observations of an M-class eruptive flare of 2015 November, 4. The pre-eruptive H alpha filament was modelled by the non-linear force free field model, which showed that it consisted of two helical systems. Tether-cutting reconnection involving these two systems led to the formation of a hot sigmoidal loop structure rooted in a small hook that formed at the end of the flare ribbon. Subsequently, the hot loops started to slip away form the small hook until it disappeared. The loops continued slipping and the ribbon elongated itself by several tens of arc seconds. A new and larger hook then appeared at the end of elongated ribbon with hot and twisted loops rooted there. After the eruption of these hot loops, the ribbon hook expanded and later contracted. We interpret these observations in the framework of the recent three dimensional (3D) extensions to the standard solar flare model, which predict the drift of the flux rope footpoints. The hot sigmoidal loop is interpreted as the flux rope, whose footpoints drift during the eruption. While the deformation and drift of the new hook can be described by the model, the displacement of the flux rope footpoint from the filament to that of the erupting flux rope indicate that the hook evolution can be more complex than those captured by the model. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Comments: ApJ, accepted

Velocities of flare kernels and the mapping norm of field line connectivity

Authors: Juraj Lörinčík, Guillaume Aulanier, Jaroslav Dudík, Alena Zemanová, Elena Dzifčáková

Abstract: We report on observations of flare ribbon kernels during the 2012 August 31 filament eruption. In the 1600\,Å and 304\,Å channels of the Atmospheric Imaging Assembly, flare kernels were observed to move along flare ribbons at velocities $v_\parallel$ of up to $450$ km\,s$^{-1}$. Kernel velocities were found to be roughly anti-correlated with strength of the magnetic field. Apparent slipping motion… ▽ More We report on observations of flare ribbon kernels during the 2012 August 31 filament eruption. In the 1600\,Å and 304\,Å channels of the Atmospheric Imaging Assembly, flare kernels were observed to move along flare ribbons at velocities $v_\parallel$ of up to $450$ km\,s$^{-1}$. Kernel velocities were found to be roughly anti-correlated with strength of the magnetic field. Apparent slipping motion of flare loops was observed in the 131\,Å only for the slowest kernels moving through strong-$B$ region. In order to interpret the observed relation between $B_{\text{LOS}}$ and $v_\parallel$, we examined distribution of the norm $N$, a quantity closely related to the slippage velocity. We then calculated the norm $N$ of the quasi-separatrix layers (QSLs) in MHD model of a solar eruption adapted to the magnetic environment which qualitatively agrees to that of the observed event. We found that both the modelled $N$ and velocities of kernels reach their highest values in the same weak-field regions, one located in the curved part of the ribbon hook and the other in the straight part of the conjugate ribbon located close to a parasitic polarity. Oppositely, lower values of the kernel velocities are seen at the tip of the ribbon hook, where the modelled $N$ is low. Since the modelled distribution of $N$ matches the observed dynamics of kernels, this supports that the kernel motions can be interpreted as a signature of QSL reconnection during the eruption. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Flare reconnection-driven magnetic field and Lorentz force variations at the Sun's surface

Authors: Krzysztof Barczynski, Guillaume Aulanier, Sophie Masson, Michael S. Wheatland

Abstract: During eruptive flares, vector magnetograms show increasing horizontal magnetic field and downward Lorentz force in the Sun's photosphere around the polarity-inversion line. Such behavior has often been associated with the implosion conjecture and interpreted as the result of either momentum conservation while the eruption moves upward, or of the contraction of flare loops. We characterize the phy… ▽ More During eruptive flares, vector magnetograms show increasing horizontal magnetic field and downward Lorentz force in the Sun's photosphere around the polarity-inversion line. Such behavior has often been associated with the implosion conjecture and interpreted as the result of either momentum conservation while the eruption moves upward, or of the contraction of flare loops. We characterize the physical origin of these observed behaviors by analyzing a generic 3D MHD simulation of an eruptive flare. Even though the simulation was undesigned to recover the magnetic field and Lorentz force properties, it is fully consistent with them, and it provides key additional informations to understand them. The area where the magnetic field increases gradually develops between current ribbons, which spread away from each other and are connected to the coronal region. This area is merely the footprint of the coronal post-flare loops, whose contraction increases their shear field component and the magnetic energy density in line with the ideal induction equation. For simulated data, we computed the Lorentz force density map by applying the method used in observations. We obtained increase of the downward component of the Lorentz force density around the PIL -consistent with observations. However, this significantly differs from the Lorentz force density maps obtained directly from the 3D magnetic field and current. These results altogether question previous interpretations based on the implosion conjecture and momentum conservation with the CME, and rather imply that the observed increases in photospheric horizontal magnetic fields result from the reconnection-driven contraction of sheared flare-loops. △ Less

Submitted 19 April, 2019; v1 submitted 10 April, 2019; originally announced April 2019.

Comments: 20 pages, 11 figures, accepted for publication in ApJ (April 19, 2019)

Solar Active Region Electric Currents Before and During Eruptive Flares

Authors: Brigitte Schmieder, Guillaume Aulanier

Abstract: The chapter "Solar Active Region Electric Currents Before and During Eruptive Flares" is a discussion on electric currents in the pre-eruption state and in the course of eruptions of solar magnetic structures, using information from solar observations, nonlinear force-free field extrapolations relying on these observations, and three-dimensional magnetohydrodynamic (MHD) models. The discussion add… ▽ More The chapter "Solar Active Region Electric Currents Before and During Eruptive Flares" is a discussion on electric currents in the pre-eruption state and in the course of eruptions of solar magnetic structures, using information from solar observations, nonlinear force-free field extrapolations relying on these observations, and three-dimensional magnetohydrodynamic (MHD) models. The discussion addresses the issue of neutralized vs. non-neutralized currents in active regions and concludes that MHD models are able to explain non-neutralized currents in active regions by the existence of strong magnetic shear along the polarity inversion lines, thus confirming previous observations that already contained this result. The models have also captured the essence of the behavior of electric currents in active regions during solar eruptions, predicting current-density increases and decreases inside flare ribbons and in the interior of expanding flux ropes respectively. The observed photospheric current density maps, inferred from vector magnetic field observations, exhibit similar whirling ribbon patterns to the MHD model results, that are interpreted as the signatures of flux ropes and of quasi-separatrix layers (QSLs) between the magnetic systems in active regions. Enhancement of the total current in these QSLs during the eruptions and decreasing current densities at the footpoint of erupting flux ropes, has been confirmed in the observations. △ Less

Submitted 10 March, 2019; originally announced March 2019.

Comments: 11 pages, 6 figures , AGU book

Modelling the Effect of Mass-Draining on Prominence Eruptions

Authors: Jack M. Jenkins, Matthew Hopwood, Pascal Démoulin, Gherardo Valori, Guillaume Aulanier, David M. Long, Lidia van Driel-Gesztelyi

Abstract: Quiescent solar prominences are observed to exist within the solar atmosphere for up to several solar rotations. Their eruption is commonly preceded by a slow increase in height that can last from hours to days. This increase in the prominence height is believed to be due to their host magnetic flux rope transitioning through a series of neighbouring quasi-equilibria before the main loss-of-equili… ▽ More Quiescent solar prominences are observed to exist within the solar atmosphere for up to several solar rotations. Their eruption is commonly preceded by a slow increase in height that can last from hours to days. This increase in the prominence height is believed to be due to their host magnetic flux rope transitioning through a series of neighbouring quasi-equilibria before the main loss-of-equilibrium that drives the eruption. Recent work suggests that the removal of prominence mass from a stable, quiescent flux rope is one possible cause for this change in height. However, these conclusions are drawn from observations and are subject to interpretation. Here we present a simple model to quantify the effect of "mass-draining" during the pre-eruptive height-evolution of a solar flux rope. The flux rope is modeled as a line current suspended within a background potential magnetic field. We first show that the inclusion of mass, up to $10^{12}$~kg, can modify the height at which the line current experiences loss-of-equilibrium by up to 14\%. Next, we show that the rapid removal of mass prior to the loss-of-equilibrium can allow the height of the flux rope to increase sharply and without upper bound as it approaches its loss-of-equilibrium point. This indicates that the critical height for the loss-of-equilibrium can occur at a range of heights depending explicitly on the amount and evolution of mass within the flux rope. Finally, we demonstrate that for the same amount of drained mass, the effect on the height of the flux rope is up to two order of magnitude larger for quiescent than for active region prominences. △ Less

Submitted 30 January, 2019; originally announced January 2019.

Comments: 13 pages, 6 figures, Accepted for publication in the Astrophysical Journal

Drifting of the line-tied footpoints of CME flux-ropes

Authors: Guillaume Aulanier, Jaroslav Dudik

Abstract: Existing 3D extensions to the standard model show that flux-rope footpoints are surrounded by curved-shaped QSL-footprints that can be related with hook-shaped flare-ribbons. We build upon this finding and further address the joint questions of their time-evolution, and of the formation of flare loops at the ends of flaring PILs of the erupting bipole, which are both relevant for flare understandi… ▽ More Existing 3D extensions to the standard model show that flux-rope footpoints are surrounded by curved-shaped QSL-footprints that can be related with hook-shaped flare-ribbons. We build upon this finding and further address the joint questions of their time-evolution, and of the formation of flare loops at the ends of flaring PILs of the erupting bipole, which are both relevant for flare understanding in general and for ICME studies in particular. We calculate QSLs and relevant field lines in an MHD simulation of a torus-unstable flux-rope. The evolving QSL footprints are used to define the outer edge of the flux rope at different times, and to identify and characterize new 3D reconnection geometries and sequences that occur above the ends of the flaring PIL. We also analyse flare-ribbons as observed in EUV by SDO/AIA and IRIS during two X-class flares. The flux-rope footpoints are drifting during the eruption, which is unexpected due to line-tying. This drifting is due to a series of coronal reconnections that erode the flux rope on one side and enlarge it on the other side. Other changes in the flux-rope footpoint-area are due to multiple reconnections of individual field lines whose topology can evolve sequentially from arcade to flux rope and finally to flare loop. These are associated with deformations and displacements of QSL footprints, which resemble those of the studied flare ribbons. Our model predicts continuous deformations and a drifting of ICME flux-rope footpoints whose areas are surrounded by equally-evolving hooked-shaped flare-ribbons, as well as the formation of flare loops at the ends of flaring PILs which originate from the flux-rope itself, both of which being due to purely three-dimensional reconnection geometries. The observed evolution of flare-ribbons in two events supports the model, but more observations are required to test all its predictions. △ Less

Submitted 10 November, 2018; originally announced November 2018.

Comments: Astronomy & Astrophysics, accepted

Journal ref: A&A 621, A72 (2019)

Generalisation of the Magnetic Field Configuration of typical and atypical Confined Flares

Authors: Navin Chandra Joshi, Xiaoshuai Zhu, Brigitte Schmieder, Guillaume Aulanier, Miho Janvier, Bhuwan Joshi, Tetsuya Magara, Ramesh Chandra, Satoshi Inoue

Abstract: Atypical flares cannot be naturally explained with standard models. To predict such flares, we need to define their physical characteristics, in particular, their magnetic environment, and identify pairs of reconnected loops. Here, we present in detail a case-study of a confined flare preceded by flux cancellation that leads to the formation of a filament. The slow rise of the non-eruptive filamen… ▽ More Atypical flares cannot be naturally explained with standard models. To predict such flares, we need to define their physical characteristics, in particular, their magnetic environment, and identify pairs of reconnected loops. Here, we present in detail a case-study of a confined flare preceded by flux cancellation that leads to the formation of a filament. The slow rise of the non-eruptive filament favours the growth and reconnection of overlying loops. The flare is only of C5.0 class but it is a long duration event. The reason is that it is comprised of three successive stages of reconnection. A non-linear force-free field extrapolation and a magnetic topology analysis allow us to identify the loops involved in the reconnection process and build a reliable scenario for this atypical confined flare. The main result is that a curved magnetic polarity inversion line in active regions is a key ingredient for producing such atypical flares. A comparison with previous extrapolations for typical and atypical confined flares leads us to propose a cartoon for generalizing the concept △ Less

Submitted 3 November, 2018; originally announced November 2018.

Comments: 32 pages, 17 figures, Accepted for publication in ApJ Journal

Interactions of twisted $Ω$-loops in a model solar convection zone

Authors: L. Jouve, A. S. Brun, G. Aulanier

Abstract: This study aims at investigating the ability of strong interactions between magnetic field concentrations during their rise through the convection zone to produce complex active regions at the solar surface. To do so, we perform numerical simulations of buoyant magnetic structures evolving and interacting in a model solar convection zone. We first produce a 3D model of rotating convection and then… ▽ More This study aims at investigating the ability of strong interactions between magnetic field concentrations during their rise through the convection zone to produce complex active regions at the solar surface. To do so, we perform numerical simulations of buoyant magnetic structures evolving and interacting in a model solar convection zone. We first produce a 3D model of rotating convection and then introduce idealized magnetic structures close to the bottom of the computational domain. These structures possess a certain degree of field line twist and they are made buoyant on a particular extension in longitude. The resulting twisted $Ω$-loops will thus evolve inside a spherical convective shell possessing large-scale mean flows. We present results on the interaction between two such loops with various initial parameters (mainly buoyancy and twist) and on the complexity of the emerging magnetic field. In agreement with analytical predictions, we find that if the loops are introduced with opposite handedness and same axial field direction or same handedness but opposite axial field, they bounce against each other. The emerging region is then constituted of two separated bipolar structures. On the contrary, if the loops are introduced with the same direction of axial and peripheral magnetic fields and if sufficiently close, they merge while rising. This more interesting case produces complex magnetic structures, with a high degree of non-neutralized currents, especially when the convective motions act significantly on the magnetic field. This indicates that those interactions could be good candidates to produce eruptive events like flares or CMEs. △ Less

Submitted 13 March, 2018; originally announced March 2018.

Comments: 39 pages, 20 figures, accepted for publication in ApJ

On the occurrence of thermal non-equilibrium in coronal loops

Authors: C. Froment, F. Auchère, Z. Mikić, G. Aulanier, K. Bocchialini, E. Buchlin, J. Solomon, E. Soubrié

Abstract: Long-period EUV pulsations, recently discovered to be common in active regions, are understood to be the coronal manifestation of thermal non-equilibrium (TNE). The active regions previously studied with EIT/SOHO and AIA/SDO indicated that long-period intensity pulsations are localized in only one or two loop bundles. The basic idea of this study is to understand why. For this purpose, we tested t… ▽ More Long-period EUV pulsations, recently discovered to be common in active regions, are understood to be the coronal manifestation of thermal non-equilibrium (TNE). The active regions previously studied with EIT/SOHO and AIA/SDO indicated that long-period intensity pulsations are localized in only one or two loop bundles. The basic idea of this study is to understand why. For this purpose, we tested the response of different loop systems, using different magnetic configurations, to different stratifications and strengths of the heating. We present an extensive parameter-space study using 1D hydrodynamic simulations (1,020 in total) and conclude that the occurrence of TNE requires specific combinations of parameters. Our study shows that the TNE cycles are confined to specific ranges in parameter space. This naturally explains why only some loops undergo constant periodic pulsations over several days: since the loop geometry and the heating properties generally vary from one loop to another in an active region, only the ones in which these parameters are compatible exhibits TNE cycles. Furthermore, these parameters (heating and geometry) are likely to vary significantly over the duration of a cycle, which potentially limits the possibilities of periodic behavior. This study also confirms that long-period intensity pulsations and coronal rain are two aspects of the same phenomenon: both phenomena can occur for similar heating conditions and can appear simultaneously in the simulations. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 26 pages, 17 figures, accepted for publication in The Astrophysical journal

Slippage of Jets Explained by the Magnetic Topology of NOAA Active Region 12035

Authors: R. Joshi, B. Schmieder, R. Chandra, G. Aulanier, F. P. Zuccarello, W. Uddin

Abstract: In this study, we present the investigation of eleven recurring solar jets originated from two different sites (site 1 and site 2) close to each other (~ 11 Mm) in the NOAA active region (AR) 12035 during 15--16 April 2014. The jets were observed by the Atmospheric Imaging Assembly (AIA) telescope onboard the Solar Dynamics Observatory (SDO) satellite. Two jets were observed by the Aryabhatta Rese… ▽ More In this study, we present the investigation of eleven recurring solar jets originated from two different sites (site 1 and site 2) close to each other (~ 11 Mm) in the NOAA active region (AR) 12035 during 15--16 April 2014. The jets were observed by the Atmospheric Imaging Assembly (AIA) telescope onboard the Solar Dynamics Observatory (SDO) satellite. Two jets were observed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital, India telescope in H-alpha. On 15 April flux emergence is important in site 1 while on 16 April flux emergence and cancellation mechanisms are involved in both sites. The jets of both sites have parallel trajectories and move to the south with a speed between 100 and 360 km/s. We observed some connection between the two sites with some transfer of brightening. The jets of site 2 occurred during the second day and have a tendency to move towards the jets of site 1 and merge with them. We conjecture that the slippage of the jets could be explained by the complex topology of the region with the presence of a few low-altitude null points and many quasi-separatrix layers (QSLs), which could intersect with one another. △ Less

Submitted 8 September, 2017; originally announced September 2017.

Comments: 27 pages, 27 figures, accepted for publication in Solar Physics

Expanding and Contracting Coronal Loops as Evidence of Vortex Flows Induced by Solar Eruptions

Authors: J. Dudík, F. P. Zuccarello, G. Aulanier, B. Schmieder, P. Démoulin

Abstract: Eruptive solar flares were predicted to generate large-scale vortex flows at both sides of the erupting magnetic flux rope. This process is analogous to a well-known hydrodynamic process creating vortex rings. The vortices lead to advection of closed coronal loops located at peripheries of the flaring active region. Outward flows are expected in the upper part and returning flows in the lower part… ▽ More Eruptive solar flares were predicted to generate large-scale vortex flows at both sides of the erupting magnetic flux rope. This process is analogous to a well-known hydrodynamic process creating vortex rings. The vortices lead to advection of closed coronal loops located at peripheries of the flaring active region. Outward flows are expected in the upper part and returning flows in the lower part of the vortex. Here, we examine two eruptive solar flares, an X1.1-class flare SOL2012-03-05T03:20 and a C3.5-class SOL2013-06-19T07:29. In both flares, we find that the coronal loops observed by the Atmospheric Imaging Assembly in its 171\,Å, 193\,Å, or 211\,Å~passbands show coexistence of expanding and contracting motions, in accordance with the model prediction. In the X-class flare, multiple expanding/contracting loops coexist for more than 35 minutes, while in the C-class flare, an expanding loop in 193\,Å~appears to be close-by and co-temporal with an apparently imploding loop arcade seen in 171\,Å. Later, the 193\,Å~loop also switches to contraction. These observations are naturally explained by vortex flows present in a model of eruptive solar flares. △ Less

Submitted 15 June, 2017; originally announced June 2017.

Comments: The Astrophysical Journal, accepted

The transition from eruptive to confined flares in the same active region

Authors: F. P. Zuccarello, R. Chandra, B. Schmieder, G. Aulanier, R. Joshi

Abstract: Solar flares are sudden and violent releases of magnetic energy in the solar atmosphere that can be divided in eruptive flares, when plasma is ejected from the solar atmosphere, resulting in a coronal mass ejection (CME), and confined flares when no CME is associated with the flare. We present a case-study showing the evolution of key topological structures, such as spines and fans which may deter… ▽ More Solar flares are sudden and violent releases of magnetic energy in the solar atmosphere that can be divided in eruptive flares, when plasma is ejected from the solar atmosphere, resulting in a coronal mass ejection (CME), and confined flares when no CME is associated with the flare. We present a case-study showing the evolution of key topological structures, such as spines and fans which may determine the eruptive versus non-eruptive behavior of the series of eruptive flares, followed by confined flares, which are all originating from the same site. To study the connectivity of the different flux domains and their evolution, we compute a potential magnetic field model of the active region. Quasi-separatrix layers are retrieved from the magnetic field extrapolation. The change of behavior of the flares from one day to the next -eruptive to confined- can be attributed to the change of orientation of the magnetic field below the fan with respect to the orientation of the overlaying spine, rather than an overall change in the stability of the large scale field. Flares tend to be more-and-more confined when the field that supports the filament and the overlying field gradually become less-and-less anti-parallel, as a direct result of changes in the photospheric flux distribution, being themselves driven by continuous shearing motions of the different magnetic flux concentrations. △ Less

Submitted 8 February, 2017; originally announced February 2017.

Comments: 11 pages, 8 figures accepted for publication in Astronomy and Astrophysics

Vortex and sink flows in eruptive flares as a model for coronal implosions

Authors: Francesco P. Zuccarello, Guillaume Aulanier, Jaroslav Dudík, Pascal Démoulin, Brigitte Schmieder, Stuart A. Gilchrist

Abstract: Eruptive flares are sudden releases of magnetic energy that involve many phenomena, several of which can be explained by the standard 2D flare model and its realizations in three-dimensions. We analyze a three-dimensional magnetohydrodynamics simulation in the framework of this model that naturally explains the contraction of coronal loops in the proximity of the flare sites, as well as the inflow… ▽ More Eruptive flares are sudden releases of magnetic energy that involve many phenomena, several of which can be explained by the standard 2D flare model and its realizations in three-dimensions. We analyze a three-dimensional magnetohydrodynamics simulation in the framework of this model that naturally explains the contraction of coronal loops in the proximity of the flare sites, as well as the inflow towards the region above the cusp-shaped loops. We find that two vorticity arcs located along the flanks of the erupting magnetic flux rope are generated as soon as the eruption begins. The magnetic arcades above the flux-rope legs are then subjected to expansion, rotation or contraction depending on which part of the vortex-flow advects them. In addition to the vortices, an inward-directed magnetic pressure gradient exists in the current sheet below the magnetic flux rope. It results in the formation of a sink that is maintained by reconnection. We conclude that coronal loop apparent implosions observed during eruptive flares are the result of hydro-magnetic effects related to the generation of vortex- and sink-flows when a flux rope moves in a magnetized environment. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Comments: 14 pages, 9 figures, to appear in The Astrophysical Journal

Long-Period Intensity Pulsations in Coronal Loops Explained by Thermal Non-Equilibrium Cycles

Authors: Clara Froment, Frédéric Auchère, Guillaume Aulanier, Zoran Mikić, Karine Bocchialini, Eric Buchlin, Jacques Solomon

Abstract: In solar coronal loops, thermal non-equilibrium (TNE) is a phenomenon that can occur when the heating is both highly-stratified and quasi-constant. Unambiguous observational identification of TNE would thus permit to strongly constrain heating scenarios. Up to now, while TNE is the standard interpretation of coronal rain, the long-term periodic evolution predicted by simulations has never been obs… ▽ More In solar coronal loops, thermal non-equilibrium (TNE) is a phenomenon that can occur when the heating is both highly-stratified and quasi-constant. Unambiguous observational identification of TNE would thus permit to strongly constrain heating scenarios. Up to now, while TNE is the standard interpretation of coronal rain, the long-term periodic evolution predicted by simulations has never been observed yet. However, the detection of long-period intensity pulsations (periods of several hours) has been recently reported with SoHO/EIT, and this phenomenon appears to be very common in loops. Moreover, the three intensity-pulsation events that we recently studied with SDO/AIA show strong evidence for TNE in warm loops. In the present paper, a realistic loop geometry from LFFF extrapolations is used as input to 1D hydrodynamic simulations. Our simulations show that for the present loop geometry, the heating has to be asymmetrical to produce TNE. We analyse in detail one particular simulation that reproduces the average thermal behavior of one of the pulsating loop bundle observed with AIA. We compare the properties of this simulation with the properties deduced from the observations. The magnetic topology of the LFFF extrapolations points to the presence of sites of preferred reconnection at one footpoint, supporting the presence of asymmetric heating. In addition, we can reproduce the temporal large-scale intensity properties of the pulsating loops. This simulation further strengthens the interpretation of the observed pulsations as signatures of TNE. This thus gives important information on the heating localization and time scale for these loops. △ Less

Submitted 5 January, 2017; originally announced January 2017.

Comments: 17 pages, 12 figures, accepted for publication in The Astrophysical journal

Hooked flare ribbons and flux-rope related QSL footprints

Authors: Jie Zhao, Stuart A. Gilchrist, Guillaume Aulanier, Brigitte Schmieder, Etienne Pariat, Hui Li

Abstract: We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare which begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by SDO/AIA can be well reproduced from a Grad-Rubin non linear force free field extrapolation method. Various… ▽ More We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare which begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by SDO/AIA can be well reproduced from a Grad-Rubin non linear force free field extrapolation method. Various inverse-S and -J shaped magnetic field lines, that surround a coronal flux rope, coincide with the sigmoid as observed in different extreme ultraviolet wavelengths, including its multi-threaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and set-up of the Grad-Rubin method. The modeled double inverse-J shaped Quasi-Separatrix Layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL-footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse tear drop shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares, and the geometrical properties of eruptive flux ropes. △ Less

Submitted 24 March, 2016; originally announced March 2016.

Comments: Accepted for publication in ApJ

Slipping Magnetic Reconnection, Chromospheric Evaporation, Implosion, and Precursors in the 2014 September 10 X1.6-Class Solar Flare

Authors: Jaroslav Dudik, Vanessa Polito, Miho Janvier, Sargam M. Mulay, Marian Karlicky, Guillaume Aulanier, Giulio Del Zanna, Elena Dzifcakova, Helen E. Mason, Brigitte Schmieder

Abstract: We investigate the occurrence of slipping magnetic reconnection, chromospheric evaporation, and coronal loop dynamics in the 2014 September 10 X-class flare. The slipping reconnection is found to be present throughout the flare from its early phase. Flare loops are seen to slip in opposite directions towards both ends of the ribbons. Velocities of 20--40 km\,s$^{-1}$ are found within time windows… ▽ More We investigate the occurrence of slipping magnetic reconnection, chromospheric evaporation, and coronal loop dynamics in the 2014 September 10 X-class flare. The slipping reconnection is found to be present throughout the flare from its early phase. Flare loops are seen to slip in opposite directions towards both ends of the ribbons. Velocities of 20--40 km\,s$^{-1}$ are found within time windows where the slipping is well resolved. The warm coronal loops exhibit expanding and contracting motions that are interpreted as displacements due to the growing flux rope that subsequently erupts. This flux rope existed and erupted before the onset of apparent coronal implosion. This indicates that the energy release proceeds by slipping reconnection and not via coronal implosion. The slipping reconnection leads to changes in the geometry of the observed structures at the \textit{IRIS} slit position, from flare loop top to the footpoints in the ribbons. This results in variations of the observed velocities of chromospheric evaporation in the early flare phase. Finally, it is found that the precursor signatures including localized EUV brightenings as well as non-thermal X-ray emission are signatures of the flare itself, progressing from the early phase towards the impulsive phase, with the tether-cutting being provided by the slipping reconnection. The dynamics of both the flare and outlying coronal loops is found to be consistent with the predictions of the standard solar flare model in 3D. △ Less

Submitted 19 March, 2016; originally announced March 2016.

Comments: The Astrophysical Journal, accepted

Chain Reconnections observed in Sympathetic Eruptions

Authors: Navin Chandra Joshi, Brigitte Schmieder, Tetsuya Magara, Yang Guo, Guillaume Aulanier

Abstract: The nature of various plausible causal links between sympathetic events is still a controversial issue. In this work, we present multi-wavelength observations of sympathetic eruptions, associated flares and coronal mass ejections (CMEs) occurring on 2013 November 17 in two close-by active regions. Two filaments i.e., F1 and F2 are observed in between the active regions. Successive magnetic reconne… ▽ More The nature of various plausible causal links between sympathetic events is still a controversial issue. In this work, we present multi-wavelength observations of sympathetic eruptions, associated flares and coronal mass ejections (CMEs) occurring on 2013 November 17 in two close-by active regions. Two filaments i.e., F1 and F2 are observed in between the active regions. Successive magnetic reconnections, caused by different reasons (flux cancellation, shear and expansion) have been identified during the whole event. The first reconnection occurred during the first eruption via flux cancellation between the sheared arcades overlying filament F2, creating a flux rope and leading to the first double ribbon solar flare. During this phase we observed the eruption of overlaying arcades and coronal loops, which leads to the first CME. The second reconnection is believed to occur between the expanding flux rope of F2 and the overlying arcades of the filament F1. We suggest that this reconnection destabilized the equilibrium of filament F1, which further facilitated its eruption. The third stage of reconnection occurred in the wake of the erupting filament F1 between the legs of overlying arcades. This may create a flux rope and the second double ribbon flare and a second CME. The fourth reconnection was between the expanding arcades of the erupting filament F1 and the nearby ambient field, which produced the bi-directional plasma flows towards both upward and downward. Observations and a nonlinear force-free field extrapolation confirm the possibility of reconnection and the causal link between the magnetic systems. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: 37 pages, 17 figures, Accepted for publication in ApJ

Critical decay index at the onset of solar eruptions

Authors: F. P. Zuccarello, G. Aulanier, S. A. Gilchrist

Abstract: Magnetic flux ropes are topological structures consisting of twisted magnetic field lines that globally wrap around an axis. The torus instability model predicts that a magnetic flux rope of major radius $R$ undergoes an eruption when its axis reaches a location where the decay index $-d(\ln B_{ex})/d(\ln R)$ of the ambient magnetic field $B_{ex}$ is larger than a critical value. In the current-wi… ▽ More Magnetic flux ropes are topological structures consisting of twisted magnetic field lines that globally wrap around an axis. The torus instability model predicts that a magnetic flux rope of major radius $R$ undergoes an eruption when its axis reaches a location where the decay index $-d(\ln B_{ex})/d(\ln R)$ of the ambient magnetic field $B_{ex}$ is larger than a critical value. In the current-wire model, the critical value depends on the thickness and time-evolution of the current channel. We use magneto-hydrodynamic (MHD) simulations to investigate if the critical value of the decay index at the onset of the eruption is affected by the magnetic flux rope's internal current profile and/or by the particular pre-eruptive photospheric dynamics. The evolution of an asymmetric, bipolar active region is driven by applying different classes of photospheric motions. We find that the critical value of the decay index at the onset of the eruption is not significantly affected by either the pre-eruptive photospheric evolution of the active region or by the resulting different magnetic flux ropes. As in the case of the current-wire model, we find that there is a `critical range' $ [1.3-1.5]$, rather than a `critical value' for the onset of the torus instability. This range is in good agreement with the predictions of the current-wire model, despite the inclusion of line-tying effects and the occurrence of tether-cutting magnetic reconnection. △ Less

Submitted 13 October, 2015; originally announced October 2015.

Comments: 15 pages, 9 figures. To appear in The Astrophysical Journal

The origin of net electric currents in solar active regions

Authors: K. Dalmasse, G. Aulanier, P. Démoulin, B. Kliem, T. Török, E. Pariat

Abstract: There is a recurring question in solar physics about whether or not electric currents are neutralized in active regions (ARs). This question was recently revisited using three-dimensional (3D) magnetohydrodynamic (MHD) numerical simulations of magnetic flux emergence into the solar atmosphere. Such simulations showed that flux emergence can generate a substantial net current in ARs. Another source… ▽ More There is a recurring question in solar physics about whether or not electric currents are neutralized in active regions (ARs). This question was recently revisited using three-dimensional (3D) magnetohydrodynamic (MHD) numerical simulations of magnetic flux emergence into the solar atmosphere. Such simulations showed that flux emergence can generate a substantial net current in ARs. Another source of AR currents are photospheric horizontal flows. Our aim is to determine the conditions for the occurrence of net vs. neutralized currents with this second mechanism. Using 3D MHD simulations, we systematically impose line-tied, quasi-static, photospheric twisting and shearing motions to a bipolar potential magnetic field. We find that such flows: (1) produce both {\it direct} and {\it return} currents, (2) induce very weak compression currents - not observed in 2.5D - in the ambient field present in the close vicinity of the current-carrying field, and (3) can generate force-free magnetic fields with a net current. We demonstrate that neutralized currents are in general produced only in the absence of magnetic shear at the photospheric polarity inversion line - a special condition rarely observed. We conclude that, as magnetic flux emergence, photospheric flows can build up net currents in the solar atmosphere, in agreement with recent observations. These results thus provide support for eruption models based on pre-eruption magnetic fields possessing a net coronal current. △ Less

Submitted 17 July, 2015; originally announced July 2015.

Comments: 14 pages and 11 figures (Accepted in The Astrophysical Journal)

From coronal observations to MHD simulations, the building blocks for 3D models of solar flares

Authors: Miho Janvier, Guillaume Aulanier, Pascal Demoulin

Abstract: Solar flares are energetic events taking place in the Sun's atmosphere, and their effects can greatly impact the environment of the surrounding planets. In particular, eruptive flares, as opposed to confined flares, launch coronal mass ejections into the interplanetary medium, and as such, are one of the main drivers of space weather. After briefly reviewing the main characteristics of solar flare… ▽ More Solar flares are energetic events taking place in the Sun's atmosphere, and their effects can greatly impact the environment of the surrounding planets. In particular, eruptive flares, as opposed to confined flares, launch coronal mass ejections into the interplanetary medium, and as such, are one of the main drivers of space weather. After briefly reviewing the main characteristics of solar flares, we summarize the processes that can account for the build up and release of energy during their evolution. In particular, we focus on the development of recent 3D numerical simulations that explain many of the observed flare features. These simulations can also provide predictions of the dynamical evolution of coronal and photospheric magnetic field. Here we present a few observational examples that, together with numerical modelling, point to the underlying physical mechanisms of the eruptions. △ Less

Submitted 20 May, 2015; originally announced May 2015.

Comments: 37 pages, 11 figures, Accepted for publication in Solar Physics, T.I.: Solar and Stellar Flares

Formation of a rotating jet during the filament eruption on 10-11 April 2013

Authors: B. Filippov, A. K. Srivastava, B. N. Dwivedi, S. Masson, G. Aulanier, N. C. Joshi, W. Uddin

Abstract: We analyze multi-wavelength and multi-viewpoint observations of a helically twisted plasma jet formed during a confined filament eruption on 10-11 April 2013. Given a rather large scale event with its high spatial and temporal resolution observations, it allows us to clearly understand some new physical details about the formation and triggering mechanism of twisting jet. We identify a pre-existin… ▽ More We analyze multi-wavelength and multi-viewpoint observations of a helically twisted plasma jet formed during a confined filament eruption on 10-11 April 2013. Given a rather large scale event with its high spatial and temporal resolution observations, it allows us to clearly understand some new physical details about the formation and triggering mechanism of twisting jet. We identify a pre-existing flux rope associated with a sinistral filament, which was observed several days before the event. The confined eruption of the filament within a null point topology, also known as an Eiffel tower (or inverted-Y) magnetic field configuration results in the formation of a twisted jet after the magnetic reconnection near a null point. The sign of helicity in the jet is found to be the same as that of the sign of helicity in the filament. Untwisting motion of the reconnected magnetic field lines gives rise to the accelerating plasma along the jet axis. The event clearly shows the twist injection from the pre-eruptive magnetic field to the jet. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: 14 pages, 12 figures, to appear in MNRAS

Can we explain non-typical solar flares?

Authors: K. Dalmasse, R. Chandra, B. Schmieder, G. Aulanier

Abstract: We used multi-wavelength high-resolution data from ARIES, THEMIS, and SDO instruments, to analyze a non-standard, C3.3 class flare produced within the active region NOAA 11589 on 2012 October 16. Magnetic flux emergence and cancellation were continuously detected within the active region, the latter leading to the formation of two filaments. Our aim is to identify the origins of the flare taki… ▽ More We used multi-wavelength high-resolution data from ARIES, THEMIS, and SDO instruments, to analyze a non-standard, C3.3 class flare produced within the active region NOAA 11589 on 2012 October 16. Magnetic flux emergence and cancellation were continuously detected within the active region, the latter leading to the formation of two filaments. Our aim is to identify the origins of the flare taking into account the complex dynamics of its close surroundings. We analyzed the magnetic topology of the active region using a linear force-free field extrapolation to derive its 3D magnetic configuration and the location of quasi-separatrix layers (QSLs) which are preferential sites for flaring activity. Because the active region's magnetic field was nonlinear force-free, we completed a parametric study using different linear force-free field extrapolations to demonstrate the robustness of the derived QSLs. The topological analysis shows that the active region presented a complex magnetic configuration comprising several QSLs. The considered data set suggests that an emerging flux episode played a key role for triggering the flare. The emerging flux likely activated the complex system of QSLs leading to multiple coronal magnetic reconnections within the QSLs. This scenario accounts for the observed signatures: the two extended flare-ribbons developed at locations matched by the photospheric footprints of the QSLs, and were accompanied with flare loops that formed above the two filaments which played no important role in the flare dynamics. This is a typical example of a complex flare that can a-priori show standard flare signatures that are nevertheless impossible to interpret with any standard model of eruptive or confined flare. We find that a topological analysis however permitted to unveil the development of such complex sets of flare signatures. △ Less

Submitted 4 March, 2015; v1 submitted 29 October, 2014; originally announced October 2014.

Comments: 13 pages, Accepted in A&A

Journal ref: A&A 574, A37 (2015)

Electric current in flares ribbons: observations and 3D standard model

Authors: Miho Janvier, G. Aulanier, V. Bommier, B. Schmieder, P. Démoulin, E. Pariat

Abstract: We present for the first time the evolution of the photospheric electric currents during an eruptive X-class flare, accurately predicted by the standard 3D flare model. We analyze this evolution for the February 15, 2011 flare using HMI/SDO magnetic observations and find that localized currents in \J-shaped ribbons increase to double their pre-flare intensity. Our 3D flare model, developed with th… ▽ More We present for the first time the evolution of the photospheric electric currents during an eruptive X-class flare, accurately predicted by the standard 3D flare model. We analyze this evolution for the February 15, 2011 flare using HMI/SDO magnetic observations and find that localized currents in \J-shaped ribbons increase to double their pre-flare intensity. Our 3D flare model, developed with the OHM code, suggests that these current ribbons, which develop at the location of EUV brightenings seen with AIA imagery, are driven by the collapse of the flare's coronal current layer. These findings of increased currents restricted in localized ribbons are consistent with the overall free energy decrease during a flare, and the shape of these ribbons also give an indication on how much twisted the erupting flux rope is. Finally, this study further enhances the close correspondence obtained between the theoretical predictions of the standard 3D model and flare observations indicating that the main key physical elements are incorporated in the model. △ Less

Submitted 23 April, 2014; v1 submitted 9 February, 2014; originally announced February 2014.

Comments: 12 pages, 7 figures

Slipping magnetic reconnection during an X-class solar flare observed by SDO/AIA

Authors: Jaroslav Dudík, Miho Janvier, Guillaume Aulanier, Giulio Del Zanna, Marian Karlický, Helen Mason, Brigitte Schmieder

Abstract: We present SDO/AIA observations of an eruptive X-class flare of July 12, 2012, and compare its evolution with the predictions of a 3D numerical simulation. We focus on the dynamics of flare loops that are seen to undergo slipping reconnection during the flare. In the AIA 131A observations, lower parts of 10 MK flare loops exhibit an apparent motion with velocities of several tens of km/s along the… ▽ More We present SDO/AIA observations of an eruptive X-class flare of July 12, 2012, and compare its evolution with the predictions of a 3D numerical simulation. We focus on the dynamics of flare loops that are seen to undergo slipping reconnection during the flare. In the AIA 131A observations, lower parts of 10 MK flare loops exhibit an apparent motion with velocities of several tens of km/s along the developing flare ribbons. In the early stages of the flare, flare ribbons consist of compact, localized bright transition-region emission from the footpoints of the flare loops. A DEM analysis shows that the flare loops have temperatures up to the formation of Fe XXIV. A series of very long, S-shaped loops erupt, leading to a CME observed by STEREO. The observed dynamics are compared with the evolution of magnetic structures in the "standard solar flare model in 3D". This model matches the observations well, reproducing both the apparently slipping flare loops, S-shaped erupting loops, and the evolution of flare ribbons. All of these processes are explained via 3D reconnection mechanisms resulting from the expansion of a torus-unstable flux rope. The AIA observations and the numerical model are complemented by radio observations showing a noise storm in the metric range. Dm-drifting pulsation structures occurring during the eruption indicate plasmoid ejection and enhancement of reconnection rate. The bursty nature of radio emission shows that the slipping reconnection is still intermittent, although it is observed to persist for more than an hour. △ Less

Submitted 29 January, 2014; originally announced January 2014.

Comments: The Astrophysical Journal, accepted

Distribution of Electric Currents in Solar Active Regions

Authors: Tibor Török, James E. Leake, Viacheslav S. Titov, Vasilis Archontis, Zoran Mikić, Mark G. Linton, Kévin Dalmasse, Guillaume Aulanier, Bernhard Kliem

Abstract: There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this q… ▽ More There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this question, and numerical simulations have, surprisingly, barely been used to address it. Here we quantify the evolution of electric currents during the formation of a bipolar active region by considering a three-dimensional magnetohydrodynamic simulation of the emergence of a sub-photospheric, current-neutralized magnetic flux rope into the solar atmosphere. We find that a strong deviation from current neutralization develops simultaneously with the onset of significant flux emergence into the corona, accompanied by the development of substantial magnetic shear along the active region's polarity inversion line. After the region has formed and flux emergence has ceased, the strong magnetic fields in the region's center are connected solely by direct currents, and the total direct current is several times larger than the total return current. These results suggest that active regions, the main sources of coronal mass ejections and flares, are born with substantial net currents, in agreement with recent observations. Furthermore, they support eruption models that employ pre-eruption magnetic fields containing such currents. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Comments: 6 pages, 5 figures, to appear in Astrophysical Journal Letters

Detection of coherent structures in photospheric turbulent flows

Authors: Abraham C. -L. Chian, Erico L. Rempel, Guillaume Aulanier, Brigitte Schmieder, Shawn C. Shadden, Brian T. Welsch, Anthony R. Yeates

Abstract: We study coherent structures in solar photospheric flows in a plage in the vicinity of the active region AR 10930 using the horizontal velocity data derived from Hinode/SOT magnetograms. Eulerian and Lagrangian coherent structures are detected by computing the Q-criterion and the finite-time Lyapunov exponents of the velocity field, respectively. Our analysis indicates that, on average, the deform… ▽ More We study coherent structures in solar photospheric flows in a plage in the vicinity of the active region AR 10930 using the horizontal velocity data derived from Hinode/SOT magnetograms. Eulerian and Lagrangian coherent structures are detected by computing the Q-criterion and the finite-time Lyapunov exponents of the velocity field, respectively. Our analysis indicates that, on average, the deformation Eulerian coherent structures dominate over the vortical Eulerian coherent structures in the plage region. We demonstrate the correspondence of the network of high magnetic flux concentration to the attracting Lagrangian coherent structures (a-LCS) in the photospheric velocity based on both observations and numerical simulations. In addition, the computation of a-LCS provides a measure of the local rate of contraction/expansion of the flow. △ Less

Submitted 9 December, 2013; originally announced December 2013.

Comments: Submitted to ApJ