-
Low-frequency pulse-jitter measurement with the uGMRT I : PSR J0437$-$4715
Authors:
Tomonosuke Kikunaga,
Shinnosuke Hisano,
Neelam Dhanda Batra,
Shantanu Desai,
Bhal Chandra Joshi,
Manjari Bagchi,
T. Prabu,
Keitaro Takahashi,
Swetha Arumugam,
Adarsh Bathula,
Subhajit Dandapat,
Debabrata Deb,
Churchil Dwivedi,
Yashwant Gupta,
Shebin Jose Jacob,
Fazal Kareem,
Nobleson K,
Pragna Mamidipaka,
Avinash Kumar Paladi,
Arul Pandian B,
Prerna Rana,
Jaikhomba Singha,
Aman Srivastava,
Mayuresh Surnis,
Pratik Tarafdar
Abstract:
High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of…
▽ More
High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of the Indian Pulsar Timing Array experiment. We were able to detect jitter in both the 300 - 500 MHz and 1260 - 1460 MHz observations of the upgraded Giant Metrewave Radio Telescope (uGMRT). The former is the first jitter measurement for this pulsar below 700 MHz, and the latter is in good agreement with results from previous studies. In addition, at 300 - 500 MHz, we investigated the frequency dependence of the jitter by calculating the jitter for each sub-banded arrival time of pulses. We found that the jitter amplitude increases with frequency. This trend is opposite as compared to previous studies, indicating that there is a turnover at intermediate frequencies. It will be possible to investigate this in more detail with uGMRT observations at 550 - 750 MHz and future high sensitive wideband observations from next generation telescopes, such as the Square Kilometre Array. We also explored the effect of jitter on the high precision dispersion measure (DM) measurements derived from short duration observations. We find that even though the DM precision will be better at lower frequencies due to the smaller amplitude of jitter noise, it will limit the DM precision for high signal-to-noise observations, which are of short durations. This limitation can be overcome by integrating for a long enough duration optimised for a given pulsar.
△ Less
Submitted 18 April, 2024; v1 submitted 4 December, 2023;
originally announced December 2023.
-
Using low-frequency scatter-broadening measurements for precision estimates of dispersion measures
Authors:
Jaikhomba Singha,
Bhal Chandra Joshi,
M. A. Krishnakumar,
Fazal Kareem,
Adarsh Bathula,
Churchil Dwivedi,
Shebin Jose Jacob,
Shantanu Desai,
Pratik Tarafdar,
P. Arumugam,
Swetha Arumugam,
Manjari Bagchi,
Neelam Dhanda Batra,
Subhajit Dandapat,
Debabrata Deb,
Jyotijwal Debnath,
A Gopakumar,
Yashwant Gupta,
Shinnosuke Hisano,
Ryo Kato,
Tomonosuke Kikunaga,
Piyush Marmat,
K. Nobleson,
Avinash K. Paladi,
Arul Pandian B.
, et al. (6 additional authors not shown)
Abstract:
A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method…
▽ More
A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method to correct for such delays by obtaining unbiased dispersion measure (DM) measurements by using low-frequency estimates of the scattering parameters. We evaluate this method by comparing the obtained DM estimates with those, where scatter-broadening is ignored using simulated data. A bias is seen in the estimated DMs for simulated data with pulse-broadening with a larger variability for a data set with a variable frequency scaling index, $α$, as compared to that assuming a Kolmogorov turbulence. Application of the proposed method removes this bias robustly for data with band averaged signal-to-noise ratio larger than 100. We report, for the first time, the measurements of the scatter-broadening time and $α$ from analysis of PSR J1643$-$1224, observed with upgraded Giant Metrewave Radio Telescope as part of the Indian Pulsar Timing Array experiment. These scattering parameters were found to vary with epoch and $α$ was different from that expected for Kolmogorov turbulence. Finally, we present the DM time-series after application of the new technique to PSR J1643$-$1224.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Comparing recent PTA results on the nanohertz stochastic gravitational wave background
Authors:
The International Pulsar Timing Array Collaboration,
G. Agazie,
J. Antoniadis,
A. Anumarlapudi,
A. M. Archibald,
P. Arumugam,
S. Arumugam,
Z. Arzoumanian,
J. Askew,
S. Babak,
M. Bagchi,
M. Bailes,
A. -S. Bak Nielsen,
P. T. Baker,
C. G. Bassa,
A. Bathula,
B. Bécsy,
A. Berthereau,
N. D. R. Bhat,
L. Blecha,
M. Bonetti,
E. Bortolas,
A. Brazier,
P. R. Brook,
M. Burgay
, et al. (220 additional authors not shown)
Abstract:
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA…
▽ More
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
P. Auclair,
S. Babak,
M. Bagchi,
A. -S. Bak Nielsen,
E. Barausse,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
C. Caprini,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
M. Crisostomi,
S. Dandapat,
D. Deb
, et al. (89 additional authors not shown)
Abstract:
The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling sup…
▽ More
The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.
△ Less
Submitted 15 May, 2024; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
S. Babak,
M. Bagchi,
A. S. Bak Nielsen,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
S. Dandapat,
D. Deb,
S. Desai,
G. Desvignes,
N. Dhanda-Batra,
C. Dwivedi
, et al. (75 additional authors not shown)
Abstract:
We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results o…
▽ More
We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.
△ Less
Submitted 25 June, 2024; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
S. Babak,
M. Bagchi,
A. S. Bak Nielsen,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
S. Dandapat,
D. Deb,
S. Desai,
G. Desvignes,
N. Dhanda-Batra,
C. Dwivedi
, et al. (73 additional authors not shown)
Abstract:
The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the su…
▽ More
The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
S. Babak,
M. Bagchi,
A. -S. Bak Nielsen,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
S. Dandapat,
D. Deb,
S. Desai,
G. Desvignes,
N. Dhanda-Batra,
C. Dwivedi
, et al. (73 additional authors not shown)
Abstract:
We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on…
▽ More
We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3σ$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Multi-band Extension of the Wideband Timing Technique
Authors:
Avinash Kumar Paladi,
Churchil Dwivedi,
Prerna Rana,
Nobleson K,
Abhimanyu Susobhanan,
Bhal Chandra Joshi,
Pratik Tarafdar,
Debabrata Deb,
Swetha Arumugam,
A Gopakumar,
M A Krishnakumar,
Neelam Dhanda Batra,
Jyotijwal Debnath,
Fazal Kareem,
Paramasivan Arumugam,
Manjari Bagchi,
Adarsh Bathula,
Subhajit Dandapat,
Shantanu Desai,
Yashwant Gupta,
Shinnosuke Hisano,
Divyansh Kharbanda,
Tomonosuke Kikunaga,
Neel Kolhe,
Yogesh Maan
, et al. (5 additional authors not shown)
Abstract:
The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency sp…
▽ More
The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency span to estimate DMs and ToAs with enhanced precision. We implement the wideband likelihood using the libstempo python interface to perform wideband timing in the tempo2 framework. We present the application of these techniques to the dataset of fourteen millisecond pulsars observed simultaneously in Band 3 (300 - 500 MHz) and Band 5 (1260 - 1460 MHz) of the upgraded Giant Metrewave Radio Telescope (uGMRT) with a large band gap of 760 MHz as a part of the Indian Pulsar Timing Array (InPTA) campaign. We achieve increased ToA and DM precision and sub-microsecond root mean square post-fit timing residuals by combining simultaneous multi-band pulsar observations done in non-contiguous bands for the first time using our novel techniques.
△ Less
Submitted 8 November, 2023; v1 submitted 25 April, 2023;
originally announced April 2023.
-
Noise analysis of the Indian Pulsar Timing Array data release I
Authors:
Aman Srivastava,
Shantanu Desai,
Neel Kolhe,
Mayuresh Surnis,
Bhal Chandra Joshi,
Abhimanyu Susobhanan,
Aurélien Chalumeau,
Shinnosuke Hisano,
Nobleson K.,
Swetha Arumugam,
Divyansh Kharbanda,
Jaikhomba Singha,
Pratik Tarafdar,
P Arumugam,
Manjari Bagchi,
Adarsh Bathula,
Subhajit Dandapat,
Lankeswar Dey,
Churchil Dwivedi,
Raghav Girgaonkar,
A. Gopakumar,
Yashwant Gupta,
Tomonosuke Kikunaga,
M. A. Krishnakumar,
Kuo Liu
, et al. (6 additional authors not shown)
Abstract:
The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering vari…
▽ More
The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering variations in our analysis. We apply Bayesian model selection to obtain the preferred noise models among these for each pulsar. For PSR J1600$-$3053, we find no evidence of DM and scattering variations, while for PSR J1909$-$3744, we find no significant scattering variations. Properties vary dramatically among pulsars. For example, we find a strong chromatic noise with chromatic index $\sim$ 2.9 for PSR J1939+2134, indicating the possibility of a scattering index that doesn't agree with that expected for a Kolmogorov scattering medium consistent with similar results for millisecond pulsars in past studies. Despite the relatively short time baseline, the noise models broadly agree with the other PTAs and provide, at the same time, well-constrained DM and scattering variations.
△ Less
Submitted 16 June, 2023; v1 submitted 21 March, 2023;
originally announced March 2023.
-
Classification of Pulsar Glitch Amplitudes using Extreme Deconvolution
Authors:
Swetha Arumugam,
Shantanu Desai
Abstract:
We carry out a classification of the glitch amplitudes of radio pulsars using Extreme Deconvolution technique based on the Gaussian Mixture Model, where the observed uncertainties in the glitch amplitudes $Δν/ν$ are taken into account. Our dataset consists of 699 glitches from 238 pulsars. We then use information theory criteria such as AIC and BIC to determine the optimum number of glitch classes…
▽ More
We carry out a classification of the glitch amplitudes of radio pulsars using Extreme Deconvolution technique based on the Gaussian Mixture Model, where the observed uncertainties in the glitch amplitudes $Δν/ν$ are taken into account. Our dataset consists of 699 glitches from 238 pulsars. We then use information theory criteria such as AIC and BIC to determine the optimum number of glitch classes. We find that both AIC and BIC show that the pulsar glitch amplitudes can be optimally described using a bimodal distribution. The mean values of $Δν/ν$ for the two components are equal to $4.79 \times 10^{-9}$ and $1.28 \times 10^{-6}$, respectively with standard deviation given by 1.01 and 0.55 dex. We also applied this method to classify the pulsar inter-glitch time intervals, and we find that AIC prefers two components, whereas BIC prefers a single component. The unified data set and analyses codes used in this work have been made publicly available.
△ Less
Submitted 14 December, 2022; v1 submitted 6 June, 2022;
originally announced June 2022.
