-
Scaling slowly rotating asteroids by stellar occultations
Authors:
A. Marciniak,
J. Ďurech,
A. Choukroun,
J. Hanuš,
W. Ogłoza,
R. Szakáts,
L. Molnár,
A. Pál,
F. Monteiro,
E. Frappa,
W. Beisker,
H. Pavlov,
J. Moore,
R. Adomavičienė,
R. Aikawa,
S. Andersson,
P. Antonini,
Y. Argentin,
A. Asai,
P. Assoignon,
J. Barton,
P. Baruffetti,
K. L. Bath,
R. Behrend,
L. Benedyktowicz
, et al. (154 additional authors not shown)
Abstract:
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for m…
▽ More
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons.
Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent.
We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity.
The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters.
Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Asteroid spin-states of a 4 Gyr collisional family
Authors:
D. Athanasopoulos,
J. Hanus,
C. Avdellidou,
R. Bonamico,
M. Delbo,
M. Conjat,
A. Ferrero,
K. Gazeas,
J. P. Rivet,
N. Sioulas,
G. van Belle,
P. Antonini,
M. Audejean,
R. Behrend,
L. Bernasconi,
J. W. Brinsfield,
S. Brouillard,
L. Brunetto,
M. Fauvaud,
S. Fauvaud,
R. González,
D. Higgins,
T. W. -S. Holoien,
G. Kobber,
R. A. Koff
, et al. (7 additional authors not shown)
Abstract:
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape…
▽ More
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape). This method has been shown to be effective in the cases of the very diffuse families that formed billions of years ago. We obtained photometric observations of asteroids in order to construct their rotational light curves; we combine them with the literature light curves and sparse-in-time photometry; we input these data in the light curve inversion methods to determine the shape and the spin pole of the asteroids in order to assess whether an object is prograde or retrograde. The ultimate goal is to assess whether we find an excess of retrograde asteroids on the inward side of the V-shape of a 4 Gyr asteroid family identified via the V-shape method. This excess of retrograde rotators is predicted by the theory of asteroid family evolution. We obtained the spin poles for 55 asteroids claimed to belong to a 4 Gyr collisional family of the inner main belt that consists of low-albedo asteroids. After re-evaluating the albedo and spectroscopic information, we found that nine of these asteroids are interlopers in the 4 Gyr family. Of the 46 remaining asteroids, 31 are found to be retrograde and 15 prograde. We also found that these retrograde rotators have a very low probability (1.29%) of being due to random sampling from an underlying uniform distribution of spin poles. Our results constitute corroborating evidence that the asteroids identified as members of a 4 Gyr collisional family have a common origin, thus strengthening their family membership.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Physical parameters of selected Gaia mass asteroids
Authors:
E. Podlewska-Gaca,
A. Marciniak,
V. Alí-Lagoa,
P. Bartczak,
T. G. Müller,
R. Szakáts,
R. Duffard,
L. Molnár,
A. Pál,
M. Butkiewicz-Bąk,
G. Dudziński,
K. Dziadura,
P. Antonini,
V. Asenjo,
M. Audejean,
Z. Benkhaldoun,
R. Behrend,
L. Bernasconi,
J. M. Bosch,
A. Chapman,
B. Dintinjana,
A. Farkas,
M. Ferrais,
S. Geier,
J. Grice
, et al. (14 additional authors not shown)
Abstract:
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties a…
▽ More
Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
Thermal properties of slowly rotating asteroids: Results from a targeted survey
Authors:
A. Marciniak,
V. Alí-Lagoa,
T. G. Müller,
R. Szakáts,
L. Molnár,
A. Pál,
E. Podlewska - Gaca,
N. Parley,
P. Antonini,
E. Barbotin,
R. Behrend,
L. Bernasconi,
M. Butkiewicz - Bąk,
R. Crippa,
R. Duffard,
R. Ditteon,
M. Feuerbach,
S. Fauvaud,
J. Garlitz,
S. Geier,
R. Goncalves,
J. Grice,
I. Grześkowiak,
R. Hirsch,
J. Horbowicz
, et al. (29 additional authors not shown)
Abstract:
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are…
▽ More
Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM).
Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period.
Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE.
Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$.
Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Photometric survey, modelling, and scaling of long-period and low-amplitude asteroids
Authors:
A. Marciniak,
P. Bartczak,
T. Müller,
J. J. Sanabria,
V. Alí-Lagoa,
P. Antonini,
R. Behrend,
L. Bernasconi,
M. Bronikowska,
M. Butkiewicz - Bąk,
A. Cikota,
R. Crippa,
R. Ditteon,
G. Dudziński,
R. Duffard,
K. Dziadura,
S. Fauvaud,
S. Geier,
R. Hirsch,
J. Horbowicz,
M. Hren,
L. Jerosimic,
K. Kamiński,
P. Kankiewicz,
I. Konstanciak
, et al. (18 additional authors not shown)
Abstract:
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a l…
▽ More
The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too.
To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods.
We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves.
We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined.
Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Shape and spin determination of Barbarian asteroids
Authors:
M. Devogèle,
P. Tanga,
P. Bendjoya,
J. P. Rivet,
J. Surdej,
J. Hanus,
L. Abe,
P. Antonini,
R. A. Artola,
M. Audejean,
R. Behrend,
F. Berski,
J. G. Bosch,
M. Bronikowska,
A. Carbognani,
F. Char,
M. -J. Kim,
Y. -J. Choi,
C. A. Colazo,
J. Coloma,
D. Coward,
R. Durkee,
O. Erece,
E. Forne,
P. Hickson
, et al. (29 additional authors not shown)
Abstract:
Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and…
▽ More
Context. The so-called Barbarian asteroids share peculiar, but common polarimetric properties, probably related to both their shape and composition. They are named after (234) Barbara, the first on which such properties were identified. As has been suggested, large scale topographic features could play a role in the polarimetric response, if the shapes of Barbarians are particularly irregular and present a variety of scattering/incidence angles. This idea is supported by the shape of (234) Barbara, that appears to be deeply excavated by wide concave areas revealed by photometry and stellar occultations. Aims. With these motivations, we started an observation campaign to characterise the shape and rotation properties of Small Main- Belt Asteroid Spectroscopic Survey (SMASS) type L and Ld asteroids. As many of them show long rotation periods, we activated a worldwide network of observers to obtain a dense temporal coverage. Methods. We used light-curve inversion technique in order to determine the sidereal rotation periods of 15 asteroids and the con- vergence to a stable shape and pole coordinates for 8 of them. By using available data from occultations, we are able to scale some shapes to an absolute size. We also study the rotation periods of our sample looking for confirmation of the suspected abundance of asteroids with long rotation periods. Results. Our results show that the shape models of our sample do not seem to have peculiar properties with respect to asteroids with similar size, while an excess of slow rotators is most probably confirmed.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Spin states of asteroids in the Eos collisional family
Authors:
J. Hanuš,
M. Delbo',
V. Alí-Lagoa,
B. Bolin,
R. Jedicke,
J. Ďurech,
H. Cibulková,
P. Pravec,
P. Kušnirák,
R. Behrend,
F. Marchis,
P. Antonini,
L. Arnold,
M. Audejean,
M. Bachschmidt,
L. Bernasconi,
L. Brunetto,
S. Casulli,
R. Dymock,
N. Esseiva,
M. Esteban,
O. Gerteis,
H. de Groot,
H. Gully,
H. Hamanowa
, et al. (12 additional authors not shown)
Abstract:
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain…
▽ More
Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain theoretical collisional and evolution models of the family, or to estimate other physical parameters by a thermophysical modeling of the thermal infrared data. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as input for the convex inversion method, and derive 3D shape models of asteroids together with their rotation periods and orientations of rotation axes. We present updated shape models for 15 asteroids and new shape model determinations for 16 asteroids. Together with the already published models from the publicly available DAMIT database, we compiled a sample of 56 Eos family members with known shape models that we used in our analysis of physical properties within the family. Rotation states of asteroids smaller than ~20 km are heavily influenced by the YORP effect, whilst the large objects more or less retained their rotation state properties since the family creation. Moreover, we also present a shape model and bulk density of asteroid (423) Diotima, an interloper in the Eos family, based on the disk-resolved data obtained by the Near InfraRed Camera (Nirc2) mounted on the W.M. Keck II telescope.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Shape models of asteroids based on lightcurve observations with BlueEye600 robotic observatory
Authors:
Josef Durech,
Josef Hanus,
Miroslav Broz,
Martin Lehky,
Raoul Behrend,
Pierre Antonini,
Stephane Charbonnel,
Roberto Crippa,
Pierre Dubreuil,
Gino Farroni,
Gilles Kober,
Alain Lopez,
Federico Manzini,
Julian Oey,
Raymond Poncy,
Claudine Rinner,
Rene Roy
Abstract:
We present physical models, i.e. convex shapes, directions of the rotation axis, and sidereal rotation periods, of 18 asteroids out of which 10 are new models and 8 are refined models based on much larger data sets than in previous work. The models were reconstructed by the lightcurve inversion method from archived publicly available lightcurves and our new observations with BlueEye600 robotic obs…
▽ More
We present physical models, i.e. convex shapes, directions of the rotation axis, and sidereal rotation periods, of 18 asteroids out of which 10 are new models and 8 are refined models based on much larger data sets than in previous work. The models were reconstructed by the lightcurve inversion method from archived publicly available lightcurves and our new observations with BlueEye600 robotic observatory. One of the new results is the shape model of asteroid (1663)~van~den~Bos with the rotation period of 749\,hr, which makes it the slowest rotator with known shape. We describe our strategy for target selection that aims at fast production of new models using the enormous potential of already available photometry stored in public databases. We also briefly describe the control software and scheduler of the robotic observatory and we discuss the importance of building a database of asteroid models for studying asteroid physical properties in collisional families.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
New and updated convex shape models of asteroids based on optical data from a large collaboration network
Authors:
J. Hanuš,
J. Ďurech,
D. A. Oszkiewicz,
R. Behrend,
B. Carry,
M. Delbo',
O. Adam,
V. Afonina,
R. Anquetin,
P. Antonini,
L. Arnold,
M. Audejean,
P. Aurard,
M. Bachschmidt,
B. Badue,
E. Barbotin,
P. Barroy,
P. Baudouin,
L. Berard,
N. Berger,
L. Bernasconi,
J-G. Bosch,
S. Bouley,
I. Bozhinova,
J. Brinsfield
, et al. (144 additional authors not shown)
Abstract:
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further stu…
▽ More
Asteroid modeling efforts in the last decade resulted in a comprehensive dataset of almost 400 convex shape models and their rotation states. This amount already provided a deep insight into physical properties of main-belt asteroids or large collisional families. We aim to increase the number of asteroid shape models and rotation states. Such results are an important input for various further studies such as analysis of asteroid physical properties in different populations, including smaller collisional families, thermophysical modeling, and scaling shape models by disk-resolved images, or stellar occultation data. This provides, in combination with known masses, bulk density estimates, but constrains also theoretical collisional and evolutional models of the Solar System. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as an input for the convex inversion method, and derive 3D shape models of asteroids, together with their rotation periods and orientations of rotation axes. The key ingredient is the support of more that one hundred observers who submit their optical data to publicly available databases. We present updated shape models for 36 asteroids, for which mass estimates are currently available in the literature or their masses will be most likely determined from their gravitational influence on smaller bodies, which orbital deflection will be observed by the ESA Gaia astrometric mission. This was achieved by using additional optical data from recent apparitions for the shape optimization. Moreover, we also present new shape model determinations for 250 asteroids, including 13 Hungarias and 3 near-Earth asteroids.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Asteroids' physical models from combined dense and sparse photometry and scaling of the YORP effect by the observed obliquity distribution
Authors:
J. Hanuš,
J. Ďurech,
M. Brož,
A. Marciniak,
B. D. Warner,
F. Pilcher,
R. Stephens,
R. Behrend,
B. Carry,
D. Čapek,
P. Antonini,
M. Audejean,
K. Augustesen,
E. Barbotin,
P. Baudouin,
A. Bayol,
L. Bernasconi,
W. Borczyk,
J. -G. Bosch,
E. Brochard,
L. Brunetto,
S. Casulli,
A. Cazenave,
S. Charbonnel,
B. Christophe
, et al. (95 additional authors not shown)
Abstract:
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can…
▽ More
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
