-
Direct microwave spectroscopy of Andreev bound states in planar Ge Josephson junctions
Authors:
M. Hinderling,
S. C. ten Kate,
M. Coraiola,
D. Z. Haxell,
M. Stiefel,
M. Mergenthaler,
S. Paredes,
S. W. Bedell,
D. Sabonis,
F. Nichele
Abstract:
We demonstrate microwave measurements of the Andreev bound state (ABS) spectrum in planar Josephson junctions (JJs) defined in Ge high mobility two-dimensional hole gases contacted by superconducting PtSiGe. The JJs and readout circuitry are located on separate chips and inductively coupled via flip-chip bonding. For a device with $350~\mathrm{nm}$ junction length, spectroscopic signatures were co…
▽ More
We demonstrate microwave measurements of the Andreev bound state (ABS) spectrum in planar Josephson junctions (JJs) defined in Ge high mobility two-dimensional hole gases contacted by superconducting PtSiGe. The JJs and readout circuitry are located on separate chips and inductively coupled via flip-chip bonding. For a device with $350~\mathrm{nm}$ junction length, spectroscopic signatures were consistent with the short-junction limit, with an induced superconducting gap $Δ^{*}\approx48~\mathrm{μeV}$ and transmission $τ\approx 0.94$. The interaction between the highest-transmission ABS and the resonator was well described by a Jaynes-Cummings model with a vacuum Rabi splitting of approximately $6~\mathrm{MHz}$. A device with junction length of $1~μm$ showed an ABS spectrum consistent with a long junction model. Time-resolved monitoring of the readout resonator in the dispersive regime revealed gate-voltage tunable junction parity fluctuations on the timescale of seconds. Our work indicates a viable path towards hybrid quantum devices based on planar Ge.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Solar flare hard X-rays from the anchor points of an eruptive filament
Authors:
Muriel Zoë Stiefel,
Andrea Francesco Battaglia,
Krzysztof Barczynski,
Hannah Collier,
Anna Volpara,
Paolo Massa,
Conrad Schwanitz,
Sofia Tynelius,
Louise Harra,
Säm Krucker
Abstract:
Context. We present an analysis of a GOES M1.8 flare with excellent observational coverage in UV, EUV, and X-ray, including observations from the instruments IRIS, SDO with AIA, Hinode/EIS, Hinode/XRT, and Solar Orbiter with the Spectrometer/Telescope for Imaging X-rays (STIX). Hard X-ray emission is often observed at the footpoints of flare loops and is occasionally observed in the corona. In thi…
▽ More
Context. We present an analysis of a GOES M1.8 flare with excellent observational coverage in UV, EUV, and X-ray, including observations from the instruments IRIS, SDO with AIA, Hinode/EIS, Hinode/XRT, and Solar Orbiter with the Spectrometer/Telescope for Imaging X-rays (STIX). Hard X-ray emission is often observed at the footpoints of flare loops and is occasionally observed in the corona. In this flare, four nonthermal hard X-ray sources are seen.
Aim. Our aim is to understand why we can observe four individual nonthermal sources in this flare and how we can characterize the physical properties of these four sources.
Methods. We used the multiwavelength approach to analyze the flare and characterize the four sources. To do this, we combined imaging at different wavelengths and spectroscopic fitting in the EUV and X-ray range.
Results. The flare is eruptive with an associated coronal mass ejection, and it shows the classical flare picture of a heated flare loop seen in EUV and X-rays, and two nonthermal hard X-ray footpoints at the loop ends. In addition to the main flare sources, we observed two outer sources in the UV, EUV, and nonthermal X-ray range located away from the main flare loop to the east and west. The two outer sources are clearly correlated in time, and they are only seen during the first two minutes of the impulsive phase, which lasts a total of about four minutes.
Conclusions. Based on the analysis, we determine that the outer sources are the anchor points of an erupting filament. The hard X-ray emission is interpreted as flare-accelerated electrons that are injected upward into the filament and then precipitate along the filament toward the chromosphere, producing Bremsstrahlung. While sources like this have been speculated to exist, this is the first report of their detection.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Tunable quantum dots from atomically precise graphene nanoribbons using a multi-gate architecture
Authors:
Jian Zhang,
Oliver Braun,
Gabriela Borin Barin,
Sara Sangtarash,
Jan Overbeck,
Rimah Darawish,
Michael Stiefel,
Roman Furrer,
Antonis Olziersky,
Klaus Müllen,
Ivan Shorubalko,
Abdalghani H. S. Daaoub,
Pascal Ruffieux,
Roman Fasel,
Hatef Sadeghi,
Mickael L. Perrin,
Michel Calame
Abstract:
Atomically precise graphene nanoribbons (GNRs) are increasingly attracting interest due to their largely modifiable electronic properties, which can be tailored by controlling their width and edge structure during chemical synthesis. In recent years, the exploitation of GNR properties for electronic devices has focused on GNR integration into field-effect-transistor (FET) geometries. However, such…
▽ More
Atomically precise graphene nanoribbons (GNRs) are increasingly attracting interest due to their largely modifiable electronic properties, which can be tailored by controlling their width and edge structure during chemical synthesis. In recent years, the exploitation of GNR properties for electronic devices has focused on GNR integration into field-effect-transistor (FET) geometries. However, such FET devices have limited electrostatic tunability due to the presence of a single gate. Here, we report on the device integration of 9-atom wide armchair graphene nanoribbons (9-AGNRs) into a multi-gate FET geometry, consisting of an ultra-narrow finger gate and two side gates. We use high-resolution electron-beam lithography (EBL) for defining finger gates as narrow as 12 nm and combine them with graphene electrodes for contacting the GNRs. Low-temperature transport spectroscopy measurements reveal quantum dot (QD) behavior with rich Coulomb diamond patterns, suggesting that the GNRs form QDs that are connected both in series and in parallel. Moreover, we show that the additional gates enable differential tuning of the QDs in the nanojunction, providing the first step towards multi-gate control of GNR-based multi-dot systems.
△ Less
Submitted 27 October, 2022; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Transparent Josephson Junctions in Higher-Order Topological Insulator WTe2 via Pd Diffusion
Authors:
Martin Endres,
Artem Kononov,
Michael Stiefel,
Marcus Wyss,
Hasitha Suriya Arachchige,
Jiaqiang Yan,
David Mandrus,
Kenji Watanabe,
Takashi Taniguchi,
Christian Schönenberger
Abstract:
Highly transparent superconducting contacts to a topological insulator (TI) remain a persistent challenge on the route to engineer topological superconductivity. Recently, the higher-order TI WTe$_2$ was shown to turn superconducting when placed on palladium (Pd) bottom contacts, demonstrating a promising material system in pursuing this goal. Here, we report the diffusion of Pd into WTe$_2$ and t…
▽ More
Highly transparent superconducting contacts to a topological insulator (TI) remain a persistent challenge on the route to engineer topological superconductivity. Recently, the higher-order TI WTe$_2$ was shown to turn superconducting when placed on palladium (Pd) bottom contacts, demonstrating a promising material system in pursuing this goal. Here, we report the diffusion of Pd into WTe$_2$ and the formation of superconducting PdTe$_x$ as the origin of observed superconductivity. We find an atomically sharp interface in vertical direction to the van der Waals layers between the diffusion crystal and its host crystal, forming state-of-the-art superconducting contacts to a TI. The diffusion is discovered to be non-uniform along the width of the WTe$_2$ crystal, with a greater extend along the edges compared to the bulk. The potential of this contacting method is highlighted in transport measurements on Josephson junctions by employing external superconducting leads.
△ Less
Submitted 19 August, 2022; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Three-dimensional imaging and analysis of annual layers in tree trunk and tooth cementum
Authors:
Bert Müller,
Muriel Stiefel,
Griffin Rodgers,
Mattia Humbel,
Melissa Osterwalder,
Jeannette von Jackowski,
Gerhard Hotz,
Adriana A. Velasco,
Henry T. Bunn,
Mario Scheel,
Timm Weitkamp,
Georg Schulz,
Christine Tanner
Abstract:
The growth of plants, animals, and humans can give rise to layered structures associated with annual periodicity. Thickness variations are often correlated to nutrition supply and stress factors. The annual layers in a tree trunk with millimeter thickness can be directly counted, whereas the layers in tooth cementum with micrometer thickness are made visible using optical microscopy. These optical…
▽ More
The growth of plants, animals, and humans can give rise to layered structures associated with annual periodicity. Thickness variations are often correlated to nutrition supply and stress factors. The annual layers in a tree trunk with millimeter thickness can be directly counted, whereas the layers in tooth cementum with micrometer thickness are made visible using optical microscopy. These optical techniques rely on the surface evaluation or thin, optically transparent slices. Hard X-ray tomography with micrometer resolution, however, provides a three-dimensional view without physical slicing. We have developed a procedure to enhance the tomography data of annual layers in human and bovid tooth cementum. The analysis of a substantial part of an archeological human tooth demonstrated that the detected number of layers depended on the selected region and could vary between 13 and 27. The related average thickness of the annual layers was found to be (5.4 $\pm$ 1.9) $μ$m for the human tooth, whereas the buffalo tooth exhibited a layer periodicity of 46 $μ$m. The present study elucidates the potential of combining computational tools with high-quality micro computed tomography data to quantify the annual layers in tooth cementum for a variety of purposes including age-at-death determination.
△ Less
Submitted 25 April, 2022;
originally announced May 2022.
-
Synthesis and Characterization of the Ternary Nitride Semiconductor Zn$_2$VN$_3$: Theoretical Prediction, Combinatorial Screening and Epitaxial Stabilization
Authors:
Siarhei Zhuk,
Andrey A. Kistanov,
Simon C. Boehme,
Noemie Ott,
Fabio La Mattina,
Michael Stiefel,
Maksym V. Kovalenko,
Sebastian Siol
Abstract:
Computationally guided high-throughput synthesis is used to explore the Zn-V-N phase space, resulting in the synthesis of a novel ternary nitride Zn$_2$VN$_3$. Following a combinatorial PVD screening, we isolate the phase and synthesize polycrystalline Zn$_2$VN$_3$ thin films with wurtzite structure on conventional borosilicate glass substrates. In addition, we demonstrate that cation-disordered,…
▽ More
Computationally guided high-throughput synthesis is used to explore the Zn-V-N phase space, resulting in the synthesis of a novel ternary nitride Zn$_2$VN$_3$. Following a combinatorial PVD screening, we isolate the phase and synthesize polycrystalline Zn$_2$VN$_3$ thin films with wurtzite structure on conventional borosilicate glass substrates. In addition, we demonstrate that cation-disordered, but phase-pure (002)-textured, Zn$_2$VN$_3$ thin films can be grown using epitaxial stabilization on α-Al2O3 (0001) substrates at remarkably low growth temperatures well below 200 °C. The structural properties and phase composition of the Zn$_2$VN$_3$ films are studied in detail using XRD and (S)TEM techniques. The composition as well as chemical state of the constituent elements are studied using RBS/ERDA as well as XPS/HAXPES methods. These analyses reveal a stoichiometric material with no oxygen contamination, besides a thin surface oxide. We find that Zn$_2$VN$_3$ is a weakly-doped p-type semiconductor demonstrating broadband room-temperature photoluminescence spanning the range between 2 eV and 3 eV. In addition, the electronic properties can be tuned over a wide range via isostructural alloying on the cation site, making this a promising material for optoelectronic applications.
△ Less
Submitted 25 November, 2021; v1 submitted 1 September, 2021;
originally announced September 2021.
-
A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation
Authors:
Sebastian Siol,
Noémie Ott,
Michael Stiefel,
Max Döbeli,
Patrik Schmutz,
Lars P. H. Jeurgens,
Claudia Cancellieri
Abstract:
TiO$_2$ and WO$_3$ are two of the most important earth-abundant electronic materials with applications in countless industries. Recently alloys of WO$_3$ and TiO$_2$ have been investigated leading to improvements of key performance indicators for a variety of applications ranging from photo-electrochemical water splitting to electrochromic smart windows. These positive reports and the complexity o…
▽ More
TiO$_2$ and WO$_3$ are two of the most important earth-abundant electronic materials with applications in countless industries. Recently alloys of WO$_3$ and TiO$_2$ have been investigated leading to improvements of key performance indicators for a variety of applications ranging from photo-electrochemical water splitting to electrochromic smart windows. These positive reports and the complexity of the ternary W-Ti-O phase diagram motivate a comprehensive experimental screening of this phase space. Using combinatorial thermal oxidation of solid solution W$_{1-x}$Ti$_{x}$ precursors combined with bulk and surface analysis mapping we investigate the oxide phase formation and surface passivation of tungsten titanium oxide in the entire compositional range from pure WO$_3$ to TiO$_2$. The system shows a remarkable structural transition from monoclinic over cubic to tetragonal symmetry with increasing Ti concentration. In addition, a strong Ti surface enrichment is observed for precursor Ti-concentrations in excess of 55 at.%, resulting in the formation of a protective rutile-structured TiO$_2$ surface layer. Despite the structural transitions, the optical properties of the oxide alloys remain largely unaltered demonstrating an independent control of multiple functional properties in W$_{1-x}$Ti$_{x}$O$_{n}$. The results from this study provide valuable guidelines for future development of W$_{1-x}$Ti$_{x}$O$_{n}$ for electronic and energy applications, but also novel engineering approaches for surface functionalization and additive manufacturing of Ti-based alloys.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
The Green's function formalism as a bridge between single and multi-compartmental modeling
Authors:
Willem A. M. Wybo,
Klaus M. Stiefel,
Benjamin Torben-Nielsen
Abstract:
Neurons are spatially extended structures that receive and process inputs on their dendrites. It is generally accepted that neuronal computations arise from the active integration of synaptic inputs along a dendrite between the input location and the location of spike generation in the axon initial segment. However, many application such as simulations of brain networks, use point-neurons --neuron…
▽ More
Neurons are spatially extended structures that receive and process inputs on their dendrites. It is generally accepted that neuronal computations arise from the active integration of synaptic inputs along a dendrite between the input location and the location of spike generation in the axon initial segment. However, many application such as simulations of brain networks, use point-neurons --neurons without a morphological component-- as computational units to keep the conceptual complexity and computational costs low. Inevitably, these applications thus omit a fundamental property of neuronal computation. In this work, we present an approach to model an artificial synapse that mimics dendritic processing without the need to explicitly simulate dendritic dynamics. The model synapse employs an analytic solution for the cable equation to compute the neuron's membrane potential following dendritic inputs. Green's function formalism is used to derive the closed version of the cable equation. We show that by using this synapse model, point-neurons can achieve results that were previously limited to the realms of multi-compartmental models. Moreover, a computational advantage is achieved when only a small number of simulated synapses impinge on a morphologically elaborate neuron. Opportunities and limitations are discussed.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
A comparison of methods to determine neuronal phase-response curves
Authors:
Benjamin Torben-Nielsen,
Marylka Uusisaari,
Klaus M. Stiefel
Abstract:
The phase-response curve (PRC) is an important tool to determine the excitability type of single neurons which reveals consequences for their synchronizing properties. We review five methods to compute the PRC from both model data and experimental data and compare the numerically obtained results from each method. The main difference between the methods lies in the reliability which is influenced…
▽ More
The phase-response curve (PRC) is an important tool to determine the excitability type of single neurons which reveals consequences for their synchronizing properties. We review five methods to compute the PRC from both model data and experimental data and compare the numerically obtained results from each method. The main difference between the methods lies in the reliability which is influenced by the fluctuations in the spiking data and the number of spikes available for analysis. We discuss the significance of our results and provide guidelines to choose the best method based on the available data.
△ Less
Submitted 26 March, 2010; v1 submitted 5 January, 2010;
originally announced January 2010.
-
A novel method for determining the phase-response curves of neurons based on minimizing spike-time prediction error
Authors:
Benjamin Torben-Nielsen,
Marylka Uusisaari,
Klaus M. Stiefel
Abstract:
Regular firing neurons can be seen as oscillators. The phase-response curve (PRC) describes how such neurons will respond to small excitatory perturbations. Knowledge of the PRC is important as it is associated to the excitability type of neurons and their capability to synchronize in networks. In this work we present a novel method to estimate the PRC from experimental data. We assume that cont…
▽ More
Regular firing neurons can be seen as oscillators. The phase-response curve (PRC) describes how such neurons will respond to small excitatory perturbations. Knowledge of the PRC is important as it is associated to the excitability type of neurons and their capability to synchronize in networks. In this work we present a novel method to estimate the PRC from experimental data. We assume that continuous noise signal can be discretized into independent perturbations at evenly spaced phases and predict the next spike based on these independent perturbations. The difference between the predicted next spike made at every discretized phase and the actual next spike time is used as the error signal used to optimize the PRC. We test our method on model data and experimentally obtained data and find that the newly developed method is robust and reliable method for the estimation of PRCs from experimental data.
△ Less
Submitted 4 January, 2010;
originally announced January 2010.
