-
Bulge+disc decomposition of HFF and CANDELS galaxies: UVJ diagrams and stellar mass-size relations of galaxy components at $0.2 \leq z \leq 1.5$
Authors:
Kalina V. Nedkova,
Boris Häußler,
Danilo Marchesini,
Gabriel B. Brammer,
Adina D. Feinstein,
Evelyn J. Johnston,
Jeyhan S. Kartaltepe,
Anton M. Koekemoer,
Nicholas S. Martis,
Adam Muzzin,
Marc Rafelski,
Heath V. Shipley,
Rosalind E. Skelton,
Mauro Stefanon,
Arjen van der Wel,
Katherine E. Whitaker
Abstract:
Using deep imaging from the CANDELS and HFF surveys, we present bulge+disc decompositions with GalfitM for $\sim$17,000 galaxies over $0.2 \leq z\leq 1.5$. We use various model parameters to select reliable samples of discs and bulges, and derive their stellar masses using an empirically calibrated relation between mass-to-light ratio and colour. Across our entire redshift range, we show that disc…
▽ More
Using deep imaging from the CANDELS and HFF surveys, we present bulge+disc decompositions with GalfitM for $\sim$17,000 galaxies over $0.2 \leq z\leq 1.5$. We use various model parameters to select reliable samples of discs and bulges, and derive their stellar masses using an empirically calibrated relation between mass-to-light ratio and colour. Across our entire redshift range, we show that discs follow stellar mass-size relations that are consistent with those of star-forming galaxies, suggesting that discs primarily evolve via star formation. In contrast, the stellar mass-size relations of bulges are mass-independent. Our novel dataset further enables us to separate components into star-forming and quiescent based on their specific star formation rates. We find that both star-forming discs and star-forming bulges lie on stellar mass-size relations that are similar to those of star-forming galaxies, while quiescent discs are typically smaller than star-forming discs and lie on steeper relations, implying distinct evolutionary mechanisms. Similar to quiescent galaxies, quiescent bulges show a flattening in the stellar mass-size relation at $\sim$10$^{10}$M$_\odot$, below which they show little mass dependence. However, their best-fitting relations have lower normalisations, indicating that at a given mass, bulges are smaller than quiescent galaxies. Finally, we obtain rest-frame colours for individual components, showing that bulges typically have redder colours than discs, as expected. We visually derive UVJ criteria to separate star-forming and quiescent components and show that this separation agrees well with component colour. HFF bulge+disc decomposition catalogues used for these analyses are publicly released with this paper.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
The effect of cosmic web filaments on galaxy properties in the RESOLVE and ECO surveys
Authors:
Munira Hoosain,
Sarah-L. Blyth,
Rosalind E. Skelton,
Sheila J. Kannappan,
David V. Stark,
Kathleen D. Eckert,
Zackary L. Hutchens,
Derrick S. Carr,
Katarina Kraljic
Abstract:
Galaxy environment plays an important role in driving the transformation of galaxies from blue and star-forming to red and quenched. Recent works have focused on the role of cosmic web filaments in galaxy evolution and have suggested that stellar mass segregation, quenching of star formation and gas-stripping may occur within filaments. We study the relationship between distance to filament and th…
▽ More
Galaxy environment plays an important role in driving the transformation of galaxies from blue and star-forming to red and quenched. Recent works have focused on the role of cosmic web filaments in galaxy evolution and have suggested that stellar mass segregation, quenching of star formation and gas-stripping may occur within filaments. We study the relationship between distance to filament and the stellar mass, colour and HI gas content of galaxies using data from the REsolved Spectroscopy of a Local VolumE (RESOLVE) survey and Environmental COntext (ECO) catalogue, two overlapping census-style, volume-complete surveys. We use the Discrete Persistence Structures Extractor (DisPerSE) to identify cosmic web filaments over the full ECO area. We find that galaxies close to filaments have higher stellar masses, in agreement with previous results. Controlling for stellar mass, we find that galaxies also have redder colours and are more gas poor closer to filaments. When accounting for group membership and halo mass, we find that these trends in colour and gas content are dominated by the increasing prevalence of galaxy group environments close to filaments, particularly for high halo mass and low stellar mass galaxies. Filaments have an additional small effect on the gas content of galaxies in low-mass haloes, possibly due to cosmic web stripping.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
CLEAR: Survey Overview, Data Analysis and Products
Authors:
Raymond C. Simons,
Casey Papovich,
Ivelina G. Momcheva,
Gabriel Brammer,
Vicente Estrada-Carpenter,
Steven L. Finkelstein,
Catherine M. Gosmeyer,
Jasleen Matharu,
Jonathan R. Trump,
Bren E. Backhaus,
Yingjie Cheng,
Nikko J. Cleri,
Henry C. Ferguson,
Kristian Finlator,
Mauro Giavalisco,
Zhiyuan Ji,
Intae Jung,
Jennifer M. Lotz,
Rosalia O'Brien,
Rosalind E. Skelton,
Vithal Tilvi,
Benjamin Weiner
Abstract:
We present an overview of the CANDELS Lyman-a Emission At Reionization (CLEAR) survey. CLEAR is a 130 orbit program of the Hubble Space Telescope using the Wide Field Camera 3 (WFC3) IR G102 grism. CLEAR targets 12 pointings divided between the GOODS-N and GOODS-S fields of the Cosmic Assembly Near-IR Deep Extragalactic Legacy Survey (CANDELS). Combined with existing spectroscopic data from other…
▽ More
We present an overview of the CANDELS Lyman-a Emission At Reionization (CLEAR) survey. CLEAR is a 130 orbit program of the Hubble Space Telescope using the Wide Field Camera 3 (WFC3) IR G102 grism. CLEAR targets 12 pointings divided between the GOODS-N and GOODS-S fields of the Cosmic Assembly Near-IR Deep Extragalactic Legacy Survey (CANDELS). Combined with existing spectroscopic data from other programs, the full CLEAR dataset includes spectroscopic imaging of these fields over 0.8-1.7 um. In this Paper, we describe the CLEAR survey, the survey strategy, the data acquisition, reduction, processing, and science products and catalogs released alongside this paper. The catalogs include emission line fluxes and redshifts derived from the combination of the photometry and grism spectroscopy for 6048 galaxies, primarily ranging from 0.2 < z < 3. We also provide an overview of CLEAR science goals and results. In conjunction with this Paper we provide links to electronic versions of the data products, including 1D + 2D extracted spectra and emission line maps.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
An extended ordinary state-based peridynamics for non-spherical horizons
Authors:
Qibang Liu,
Muhao Chen,
Robert E. Skelton
Abstract:
This work presents an extended ordinary state-based peridynamics (XOSBPD) model for the non-spherical horizons. Based on the OSBPD, we derive the XOSBPD by introducing the Lagrange multipliers to guarantee the non-local dilatation and non-local strain energy density (SED) are equal to local dilatation and local SED, respectively. In this formulation, the XOSBPD removes the limitation of spherical…
▽ More
This work presents an extended ordinary state-based peridynamics (XOSBPD) model for the non-spherical horizons. Based on the OSBPD, we derive the XOSBPD by introducing the Lagrange multipliers to guarantee the non-local dilatation and non-local strain energy density (SED) are equal to local dilatation and local SED, respectively. In this formulation, the XOSBPD removes the limitation of spherical horizons and is suitable for arbitrary horizon shapes. In addition, the presented XOSBPD does not need volume and surface correction and allows non-uniform discretization implementation with various horizon sizes. Three classic examples demonstrate the accuracy and capability for complex dynamical fracture analysis. The proposed method provides an efficient tool and in-depth insight into the failure mechanism of structure components and solid materials.
△ Less
Submitted 15 July, 2022; v1 submitted 18 June, 2022;
originally announced July 2022.
-
Design and control analysis of a deployable clustered hyperbolic paraboloid cable net
Authors:
Shuo Ma,
Kai Lu,
Muhao Chen,
Robert E. Skelton
Abstract:
This paper presents an analytical and experimental design and deployment control analysis of a hyperbolic paraboloid cable net based on clustering actuation strategies. First, the dynamics and statics for clustered tensegrity structures (CTS) are given. Then, we propose the topology design of the deployable hyperbolic paraboloid cable net. The deployability of the cable net is achieved by using cl…
▽ More
This paper presents an analytical and experimental design and deployment control analysis of a hyperbolic paraboloid cable net based on clustering actuation strategies. First, the dynamics and statics for clustered tensegrity structures (CTS) are given. Then, we propose the topology design of the deployable hyperbolic paraboloid cable net. The deployability of the cable net is achieved by using clustered cables. It is shown that the clustered cables significantly reduce the number of actuators required for control. The deployment trajectory and actuation prestress in the cables are designed to ensure the tensions are feasible during the deployment process. Then, we compare the deployment analysis's open-loop and closed-loop control strategies. Finally, a lab-scale model is constructed to validate the actuation laws. We test the static performance and deployment process of the experimental model. Results show that the closed-loop control approach is more stable and smoother than the open-loop one in the deployment process. The approaches developed in this paper can also be used for various deployable tensegrity structures.
△ Less
Submitted 26 June, 2022;
originally announced June 2022.
-
Equilibrium and stiffness study of clustered tensegrity structures with the consideration of pulley sizes
Authors:
Shuo Ma,
Yiqian Chen,
Muhao Chen,
Robert E. Skelton
Abstract:
This paper presents the equilibrium and stiffness study of clustered tensegrity structures (CTS) considering pulley sizes. We first derive the geometric relationship between clustered strings and pulleys, where the nodal vector is chosen as the generalized coordinate. Then, the equilibrium equations of the clustered tensegrity structure with pulleys based on the Lagrangian method are given. Since…
▽ More
This paper presents the equilibrium and stiffness study of clustered tensegrity structures (CTS) considering pulley sizes. We first derive the geometric relationship between clustered strings and pulleys, where the nodal vector is chosen as the generalized coordinate. Then, the equilibrium equations of the clustered tensegrity structure with pulleys based on the Lagrangian method are given. Since the stiffness of a structure is usually weakened when using clustering strings, we formulate the tangent stiffness matrix equations for analysis. It is also shown that as pulley sizes go to zero, the governing equations of the clustered tensegrity system with pulleys yield to the classical clustered tensegrity structure without pulleys, which is consistent with the existing literature. Three examples are demonstrated to validate the given theory. The proposed method allows one to conduct equilibrium, stiffness, and robustness studies of cluster tensegrity structures with pulleys. Nevertheless, the approach developed in this paper is not limited to the tensegrity structures. It can also be applied to a wide range of applications with pulley-rope systems, such as drilling rigs, ocean platform anchors, and cargo cranes.
△ Less
Submitted 8 June, 2022;
originally announced June 2022.
-
3D-DASH: The Widest Near-Infrared Hubble Space Telescope Survey
Authors:
Lamiya A. Mowla,
Sam E. Cutler,
Gabriel B. Brammer,
Ivelina G. Momcheva,
Katherine E. Whitaker,
Pieter G. van Dokkum,
Rachel S. Bezanson,
Natascha M. Forster Schreiber,
Marijn Franx,
Kartheik G. Iyer,
Danilo Marchesini,
Adam Muzzin,
Erica J. Nelson,
Rosalind E. Skelton,
Gregory F. Snyder,
David A. Wake,
Stijn Wuyts,
Arjen van der Wel
Abstract:
The 3D-Drift And SHift (3D-DASH) program is a \textit{Hubble Space Telescope} WFC3 F160W imaging and G141 grism survey of the equatorial COSMOS field. 3D-DASH extends the legacy of HST near-infrared imaging and spectroscopy to degree-scale swaths of the sky, enabling the identification and study of distant galaxies ($z>2$) that are rare or in short-lived phases of galaxy evolution at rest-frame op…
▽ More
The 3D-Drift And SHift (3D-DASH) program is a \textit{Hubble Space Telescope} WFC3 F160W imaging and G141 grism survey of the equatorial COSMOS field. 3D-DASH extends the legacy of HST near-infrared imaging and spectroscopy to degree-scale swaths of the sky, enabling the identification and study of distant galaxies ($z>2$) that are rare or in short-lived phases of galaxy evolution at rest-frame optical wavelengths. Furthermore, when combined with existing ACS/F814W imaging, the program facilitates spatially-resolved studies of the stellar populations and dust content of intermediate-redshift ($0.5<z<2$) galaxies. Here we present the reduced F160W imaging mosaic available to the community. Observed with the efficient DASH technique, the mosaic comprises 1256 individual WFC3 pointings, corresponding to an area of 1.35 deg$^2$ (1.43 deg$^2$ in 1912 when including archival data). The median $5σ$ point-source limit in $H_{160}$ is 24.74 mag. We also provide tools to determine the local point spread function (PSF), create cutouts, and explore the image at any location within the 3D-DASH footprint. 3D-DASH is the widest \textit{HST}/WFC3 imaging survey in the F160W filter to date, increasing the existing extragalactic survey area in the near-infrared at HST resolution by an order of magnitude.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
Decoding the star forming properties of gas-rich galaxy pairs
Authors:
Jamie Bok,
Michelle E. Cluver,
Thomas H. Jarrett,
Rosalind E. Skelton,
Michael G. Jones,
Lourdes Verdes-Montenegro
Abstract:
We extend the analysis of Bok et al. (2020) in which the HI content of isolated galaxies from the AMIGA sample and selected paired galaxies from ALFALFA were examined as a potential driver of galaxy location on the WISE mid-infrared SFR-Mstar sequence. By further characterizing the isolated and pair galaxy samples, i.e. in terms of optical galaxy morphology, a more detailed and quantitative descri…
▽ More
We extend the analysis of Bok et al. (2020) in which the HI content of isolated galaxies from the AMIGA sample and selected paired galaxies from ALFALFA were examined as a potential driver of galaxy location on the WISE mid-infrared SFR-Mstar sequence. By further characterizing the isolated and pair galaxy samples, i.e. in terms of optical galaxy morphology, a more detailed and quantitative description of local galaxy environment by way of the local number density (eta) and tidal strength (Q) parameters, star formation efficiency (SFE(HI)), and HI integrated profile asymmetries, we present plausible pathways for the broadening of the pair sample HI deficiency distribution towards both high and low deficiencies compared to the narrower isolated galaxy sample distribution (i.e. sigma_pairs = 0.34 versus sigma_AMIGA = 0.28). We associate the gas-rich tail of the pair deficiency distribution with the highest Q values, large profile asymmetries, and low SFEs. From this we infer that merger activity is enhancing gas supplies, as well as disrupting the efficiency of star formation, via strong gravitational torques. The gas-poor wing of the deficiency distribution appears to be populated with galaxies in denser environments (with larger eta values on average), more akin to groups. Despite our gas-rich selection criterion, there is a small population of early-type galaxies in the pair sample, which primarily fall in the positive deficiency wing of the distribution. These results suggest that a combination of a denser galaxy environment, early-type morphology, and higher stellar mass, is contributing to the broadening of the deficiency distribution towards larger deficiencies.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Dynamics and control of clustered tensegrity systems
Authors:
Shuo Ma,
Muhao Chen,
Robert E. Skelton
Abstract:
This paper presents the formulations of nonlinear and linearized statics, dynamics, and control for any clustered tensegrity system (CTS). Based on the Lagrangian method and FEM assumptions, the nonlinear clustered tensegrity dynamics with and without constraints are first derived. It is shown that the traditional tensegrity system (TTS), whose node to node strings are individual ones, yield to be…
▽ More
This paper presents the formulations of nonlinear and linearized statics, dynamics, and control for any clustered tensegrity system (CTS). Based on the Lagrangian method and FEM assumptions, the nonlinear clustered tensegrity dynamics with and without constraints are first derived. It is shown that the traditional tensegrity system (TTS), whose node to node strings are individual ones, yield to be a special case of the CTS. Then, equilibrium equations of the CTS in three standard forms (in terms of nodal coordinate, force density, and force vector) and the compatibility equation are given. Moreover, the linearized dynamics and modal analysis of the CTS with and without constraints are also derived. We also present a nonlinear shape control law for the control of any CTS. The control turns out to be a linear algebra problem in terms of the control variable, which is the force densities in the strings. The statics, dynamics, and control examples are carefully selected to demonstrate the developed principles. The presented approaches can boost the comprehensive studies of the statics, dynamics, and control for any CTS, as well as promoting the integration of structure and control design.
△ Less
Submitted 17 October, 2021;
originally announced October 2021.
-
Minimal mass design of a tensegrity tower for lunar electromagnetic launching
Authors:
Xiaowen Su,
Muhao Chen,
Manoranjan Majji,
Robert E. Skelton
Abstract:
Lunar explorations have provided us with information about its abundant resources that can be utilized in orbiting-resource depots as lunar-derived commodities. To reduce the energy requirements of a launcher to send these commodities from the lunar surface to the space depots, this paper explores the application of the electromagnetic acceleration principle and provides an assessment of the actua…
▽ More
Lunar explorations have provided us with information about its abundant resources that can be utilized in orbiting-resource depots as lunar-derived commodities. To reduce the energy requirements of a launcher to send these commodities from the lunar surface to the space depots, this paper explores the application of the electromagnetic acceleration principle and provides an assessment of the actual technical characteristics of the launcher's installation to ensure the acceleration of a payload with a mass of 1,500 kg to a speed of 2,200 m/s (circumlunar orbit speed). To fulfill a lightweight (fewer materials and less energy) support structure for the electromagnetic launcher with strength requirements, the tensegrity structure minimum mass principle without global buckling has been developed and applied to support the electromagnetic acceleration device. Therefore, this paper proposes and develops a minimal mass electromagnetic tensegrity lunar launcher. We first demonstrate the mechanics of launcher and payload, how a payload can be accelerated to a specific velocity, and how a payload carrier can be recycled for another launch. Then, a detailed discussion on the lunar launch system, procedures of propulsion, the required mass, and energy of the launch barrel are given. The governing equations of tensegrity minimal mass tensegrity design algorithm with gravity and without global buckling. Finally, a case study is conducted to show a feasible structure design, the required mass, and energy. The principles developed in this paper are also applicable to the rocket launch system, space elevator, space train transportation, interstellar payload package delivery, etc.
△ Less
Submitted 21 June, 2021;
originally announced June 2021.
-
Design and analysis of deployable clustered tensegrity cable domes
Authors:
Shuo Ma,
Muhao Chen,
Xingfei Yuan,
Robert E. Skelton
Abstract:
This study presents the design and analysis of deployable cable domes based on the clustered tensegrity structures (CTS). In this paper, the statics and dynamics equations of the CTS are first given. Using a traditional Levy cable dome as an example, we show the approach to modify the Levy dome to a deployable CTS one. The strings to be clustered are determined by the requirement of prestress mode…
▽ More
This study presents the design and analysis of deployable cable domes based on the clustered tensegrity structures (CTS). In this paper, the statics and dynamics equations of the CTS are first given. Using a traditional Levy cable dome as an example, we show the approach to modify the Levy dome to a deployable CTS one. The strings to be clustered are determined by the requirement of prestress mode and global stability. The deployment trajectory is proposed by changing the deployment ratio (the ratio between the radius of the inner and outer rings of the cable dome). Then, the quasi-static and dynamic deployment of clustered tensegrity dome is studied. Results show that the proposed CTS cable dome always has one prestress mode and is globally stable in its deployment trajectory. In the deployment process analysis, the dynamics show that the system's dynamic response differs from the quasi-static simulation as the actuation speed increases. That is, for a fast deployment process, quasi-static simulation is not accurate enough. The dynamics effects of the deployment must be considered. The developed approaches can also be used for the design and analysis of various kinds of CTS.
△ Less
Submitted 15 June, 2021;
originally announced June 2021.
-
Extending the evolution of the stellar mass-size relation at $z \leq 2$ to low stellar mass galaxies from HFF and CANDELS
Authors:
Kalina V. Nedkova,
Boris Häußler,
Danilo Marchesini,
Paola Dimauro,
Gabriel Brammer,
Paul Eigenthaler,
Adina D. Feinstein,
Henry C. Ferguson,
Marc Huertas-Company,
Evelyn J. Johnston,
Erin Kado-Fong,
Jeyhan S. Kartaltepe,
Ivo Labbé,
Daniel Lange-Vagle,
Nicholas S. Martis,
Elizabeth J. McGrath,
Adam Muzzin,
Pascal Oesch,
Yasna Ordenes-Briceño,
Thomas Puzia,
Heath V. Shipley,
Brooke D. Simmons,
Rosalind E. Skelton,
Mauro Stefanon,
Arjen van der Wel
, et al. (1 additional authors not shown)
Abstract:
We reliably extend the stellar mass-size relation over $0.2\leq z \leq2$ to low stellar mass galaxies by combining the depth of Hubble Frontier Fields (HFF) with the large volume covered by CANDELS. Galaxies are simultaneously modelled in multiple bands using the tools developed by the MegaMorph project, allowing robust size (i.e., half-light radius) estimates even for small, faint, and high redsh…
▽ More
We reliably extend the stellar mass-size relation over $0.2\leq z \leq2$ to low stellar mass galaxies by combining the depth of Hubble Frontier Fields (HFF) with the large volume covered by CANDELS. Galaxies are simultaneously modelled in multiple bands using the tools developed by the MegaMorph project, allowing robust size (i.e., half-light radius) estimates even for small, faint, and high redshift galaxies. We show that above 10$^7$M$_\odot$, star-forming galaxies are well represented by a single power law on the mass-size plane over our entire redshift range. Conversely, the stellar mass-size relation is steep for quiescent galaxies with stellar masses $\geq 10^{10.3}$M$_\odot$ and flattens at lower masses, regardless of whether quiescence is selected based on star-formation activity, rest-frame colours, or structural characteristics. This flattening occurs at sizes of $\sim1$kpc at $z\leq1$. As a result, a double power law is preferred for the stellar mass-size relation of quiescent galaxies, at least above 10$^7$M$_\odot$. We find no strong redshift dependence in the slope of the relation of star-forming galaxies as well as of high mass quiescent galaxies. We also show that star-forming galaxies with stellar masses $\geq$10$^{9.5}$M$_\odot$ and quiescent galaxies with stellar masses $\geq10^{10.3}$M$_\odot$ have undergone significant size growth since $z\sim2$, as expected; however, low mass galaxies have not. Finally, we supplement our data with predominantly quiescent dwarf galaxies from the core of the Fornax cluster, showing that the stellar mass-size relation is continuous below 10$^7$M$_\odot$, but a more complicated functional form is necessary to describe the relation.
△ Less
Submitted 15 June, 2021; v1 submitted 14 June, 2021;
originally announced June 2021.
-
Tensegrity system dynamics based on finite element method
Authors:
Shuo Ma,
Muhao Chen,
Robert E. Skelton
Abstract:
This study presents a finite element analysis approach to non-linear and linearized tensegrity dynamics based on the Lagrangian method with nodal coordinate vectors as the generalized coordinates. In this paper, nonlinear tensegrity dynamics with and without constraints are first derived. The equilibrium equations in three standard forms (in terms of nodal coordinate, force density, and force vect…
▽ More
This study presents a finite element analysis approach to non-linear and linearized tensegrity dynamics based on the Lagrangian method with nodal coordinate vectors as the generalized coordinates. In this paper, nonlinear tensegrity dynamics with and without constraints are first derived. The equilibrium equations in three standard forms (in terms of nodal coordinate, force density, and force vectors) and the compatibility equation are also given. Then, we present the linearized dynamics and modal analysis equations with and without constraints. The developed approach is capable of conducting the following comprehensive dynamics studies for any tensegrity structures accurately: 1. Performing rigid body dynamics with acceptable errors, which is achieved by setting relatively high stiffness for bars in the simulation. 2. Simulating FEM dynamics accurately, where bars and strings can have elastic or plastic deformations. 3. Dealing with various kinds of boundary conditions, for example, fixing or applying static/dynamic loads at any nodes in any direction (i.e., gravitational force, some specified forces, or arbitrary seismic vibrations). 4. Conducting accurate modal analysis, including natural frequency and corresponding modes. Three examples, a double pendulum, a cantilever truss with external force, and a double prism tensegrity tower, are carefully selected and studied. The results are compared with rigid body dynamics and FEM software ANSYS. This study provides a deep insight into structures, materials, performances, as well as an interface towards integrating control theories.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
Spatially Resolved Star Formation and Inside-out Quenching in the TNG50 Simulation and 3D-HST Observations
Authors:
Erica J. Nelson,
Sandro Tacchella,
Benedikt Diemer,
Joel Leja,
Lars Hernquist,
Katherine E. Whitaker,
Rainer Weinberger,
Annalisa Pillepich,
Dylan Nelson,
Bryan A. Terrazas,
Rebecca Nevin,
Gabriel B. Brammer,
Blakesley Burkhart,
Rachel Cochrane,
Pieter van Dokkum,
Benjamin D. Johnson,
Lamiya Mowla,
Rudiger Pakmor,
Rosalind E. Skelton,
Joshua Speagle,
Volker Springel,
Paul Torrey,
Mark Vogelsberger,
Stijn Wuyts
Abstract:
We compare the star forming main sequence (SFMS) -- both integrated and resolved on 1kpc scales -- between the high-resolution TNG50 simulation of IllustrisTNG and observations from the 3D-HST slitless spectroscopic survey at z~1. Contrasting integrated star formation rates (SFRs), we find that the slope and normalization of the star-forming main sequence in TNG50 are quantitatively consistent wit…
▽ More
We compare the star forming main sequence (SFMS) -- both integrated and resolved on 1kpc scales -- between the high-resolution TNG50 simulation of IllustrisTNG and observations from the 3D-HST slitless spectroscopic survey at z~1. Contrasting integrated star formation rates (SFRs), we find that the slope and normalization of the star-forming main sequence in TNG50 are quantitatively consistent with values derived by fitting observations from 3D-HST with the Prospector Bayesian inference framework. The previous offsets of 0.2-1dex between observed and simulated main sequence normalizations are resolved when using the updated masses and SFRs from Prospector. The scatter is generically smaller in TNG50 than in 3D-HST for more massive galaxies with M_*>10^10Msun, even after accounting for observational uncertainties. When comparing resolved star formation, we also find good agreement between TNG50 and 3D-HST: average specific star formation rate (sSFR) radial profiles of galaxies at all masses and radii below, on, and above the SFMS are similar in both normalization and shape. Most noteworthy, massive galaxies with M_*>10^10.5Msun, which have fallen below the SFMS due to ongoing quenching, exhibit a clear central SFR suppression, in both TNG50 and 3D-HST. In TNG this inside-out quenching is due to the supermassive black hole (SMBH) feedback model operating at low accretion rates. In contrast, the original Illustris simulation, without this same physical SMBH mechanism, does not reproduce the central SFR profile suppression seen in data. The observed sSFR profiles provide support for the TNG quenching mechanism and how it affects gas on kiloparsec scales in the centers of galaxies.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Integrating Structure, Information Architecture and Control Design: Application to Tensegrity Systems
Authors:
Raman Goyal,
Manoranjan Majji,
Robert E. Skelton
Abstract:
A novel unified approach to jointly optimize structural design parameters, actuator and sensor precision and controller parameters is presented in this paper. The joint optimization problem is posed as a covariance control problem, where feasibility is achieved by bounding the covariance of the output as well as that of the control signals. The formulation is used to design a tensegrity system, wh…
▽ More
A novel unified approach to jointly optimize structural design parameters, actuator and sensor precision and controller parameters is presented in this paper. The joint optimization problem is posed as a covariance control problem, where feasibility is achieved by bounding the covariance of the output as well as that of the control signals. The formulation is used to design a tensegrity system, where the initial prestress parameters, sensor and actuator precisions, and the control law are jointly optimized. Tensegrity system dynamics models linearized about an equilibrium point are used for system design, where minimality is ensured by constraint projection. The feedback loop is assumed to have a full-order dynamic compensator with its characteristic matrices chosen as optimization variables. The suboptimal solution of this non-convex system design problem is found by iterating over an approximated convex problem through the use of a convexifying potential function that enables the convergence to a stationary point. It is shown that for a linear dynamical system, the approximated joint optimization problem can be formulated using Linear Matrix Inequalities (LMIs).
△ Less
Submitted 18 December, 2020; v1 submitted 21 November, 2020;
originally announced November 2020.
-
Robust Shape Control of Gyroscopic Tensegrity Robotic Arm
Authors:
Raman Goyal,
Manoranjan Majji,
Robert E. Skelton
Abstract:
This paper proposes a model-based approach to control the shape of a tensegrity system by driving its node position locations. The nonlinear dynamics of the tensegrity system is used to regulate position, velocity, and acceleration to the specified reference trajectory. State feedback control design is used to obtain the solution for the control variable as a linear programming problem. Shape cont…
▽ More
This paper proposes a model-based approach to control the shape of a tensegrity system by driving its node position locations. The nonlinear dynamics of the tensegrity system is used to regulate position, velocity, and acceleration to the specified reference trajectory. State feedback control design is used to obtain the solution for the control variable as a linear programming problem. Shape control for the gyroscopic tensegrity systems is discussed, and it is observed that these systems increase the reachable space for the structure by providing independent control over certain rotational degrees of freedom. Disturbance rejection of the tensegrity system is further studied in the paper. A methodology to calculate the control gains to bound the errors for five different types of problems is provided. The formulation uses a Linear Matrix Inequality (LMI) approach to stipulate the desired performance bounds on the error for $\mathcal{H}_\infty$, generalized $\mathcal{H}_2$, LQR, covariance control and stabilizing control problem. A high degree of freedom tensegrity $T_2D_1$ robotic arm is used as an example to show the efficacy of the formulation.
△ Less
Submitted 19 November, 2020; v1 submitted 7 November, 2020;
originally announced November 2020.
-
Markov Data-Based Reference Tracking of Tensegrity Morphing Airfoils
Authors:
Yuling Shen,
Muhao Chen,
Manoranjan Majji,
Robert E. Skelton
Abstract:
This letter presents a data-based control design for reference tracking applications. This design finds the optimal control sequence, which minimizes a quadratic cost function consisting of tracking error and input increments over a finite interval [0,N]. The only information needed is the first N+1 Markov parameters of the system. This design is employed on a tensegrity morphing airfoil whose top…
▽ More
This letter presents a data-based control design for reference tracking applications. This design finds the optimal control sequence, which minimizes a quadratic cost function consisting of tracking error and input increments over a finite interval [0,N]. The only information needed is the first N+1 Markov parameters of the system. This design is employed on a tensegrity morphing airfoil whose topology has been described in detail in this letter. A NACA 2412 airfoil with specified morphing targets is chosen to verify the developed design. The principle developed in this letter is also applicable to other structural control problems.
△ Less
Submitted 20 October, 2020;
originally announced October 2020.
-
HI study of isolated and pair galaxies: the MIR SFR-M$\star$ sequence
Authors:
Jamie Bok,
Rosalind E. Skelton,
Michelle E. Cluver,
Thomas H. Jarrett,
Michael G. Jones,
Lourdes Verdes-Montenegro
Abstract:
Using mid-infrared star formation rate and stellar mass indicators in $\textit{WISE}$, we construct and contrast the relation between star formation rate and stellar mass for isolated and paired galaxies. Our samples comprise a selection of AMIGA (isolated galaxies) and pairs of ALFALFA galaxies with HI detections such that we can examine the relationship between HI content (gas fraction, HI defic…
▽ More
Using mid-infrared star formation rate and stellar mass indicators in $\textit{WISE}$, we construct and contrast the relation between star formation rate and stellar mass for isolated and paired galaxies. Our samples comprise a selection of AMIGA (isolated galaxies) and pairs of ALFALFA galaxies with HI detections such that we can examine the relationship between HI content (gas fraction, HI deficiency) and galaxy location on the main sequence (MS) in these two contrasting environments. We derive for the first time an HI scaling relation for isolated galaxies using $\textit{WISE}$ stellar masses, and thereby establish a baseline predictor of HI content that can be used to assess the impact of environment on HI content when compared with samples of galaxies in different environments. We use this updated relation to determine the HI deficiency of both our paired and isolated galaxies. Across all the quantities examined as a function of environment in this work (MS location, gas fraction, and HI deficiency), the AMIGA sample of isolated galaxies is found to have the lower dispersion: $σ_{\rm{AMIGA}} = 0.37$ versus $σ_{\rm{PAIRS}} = 0.55$ on the MS, $σ_{\rm{AMIGA}} = 0.44$ versus $σ_{\rm{PAIRS}} = 0.54$ in gas fraction, and $σ_{\rm{AMIGA}} = 0.28$ versus $σ_{\rm{PAIRS}} = 0.34$ in HI deficiency. We also note fewer isolated quiescent galaxies, 3 (0.6$\%$), compared to 12 (2.3$\%$) quiescent pair members. Our results suggest the differences in scatter measured between our samples are environment driven. Galaxies in isolation behave relatively predictably, and galaxies in more densely populated environments adopt a more stochastic behaviour, across a broad range of quantities.
△ Less
Submitted 1 October, 2020; v1 submitted 30 September, 2020;
originally announced September 2020.
-
Deployable Tensegrity Lunar Tower
Authors:
Muhao Chen,
Raman Goyal,
Manoranjan Majji,
Robert E. Skelton
Abstract:
A tensegrity tower design to support a given payload for the moon mining operation is proposed in this paper. A non-linear optimization problem for the minimal-mass structure design is posed and solved, subject to the yielding constraints for strings and yielding and buckling constraints for bars in the presence of lunar gravity. The optimization variables for this non-linear problem are structura…
▽ More
A tensegrity tower design to support a given payload for the moon mining operation is proposed in this paper. A non-linear optimization problem for the minimal-mass structure design is posed and solved, subject to the yielding constraints for strings and yielding and buckling constraints for bars in the presence of lunar gravity. The optimization variables for this non-linear problem are structural complexity and pre-stress in the strings. Apart from local failure constraints of yielding and buckling, global buckling is also considered. The structure designed as a deployable tower is a TnD1 tensegrity structure. A case study demonstrates the feasibility and advantage of the tower design. The principles developed in this paper are also applicable for building other structures on the Earth or other planets.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
High Redshift Massive Quiescent Galaxies are as Flat as Star Forming Galaxies: The Flattening of Galaxies and the Correlation with Structural Properties in CANDELS/3D-HST
Authors:
Allison R. Hill,
Arjen van der Wel,
Marijn Franx,
Adam Muzzin,
Rosalind E. Skelton,
Iva Momcheva,
Pieter van Dokkum,
Katherine E. Whitaker
Abstract:
We investigate the median flattening of galaxies at $0.2<z<4.0$ in all five CANDELS/3D-HST fields via the apparent axis ratio $q$. We separate the sample into bins of redshift, stellar-mass, sérsic index, size, and UVJ determined star-forming state to discover the most important drivers of the median $q$ ($q_{med}$). Quiescent galaxies at $z<1$ and $M_{*}>10^{11}M_{\odot}$ are rounder than those a…
▽ More
We investigate the median flattening of galaxies at $0.2<z<4.0$ in all five CANDELS/3D-HST fields via the apparent axis ratio $q$. We separate the sample into bins of redshift, stellar-mass, sérsic index, size, and UVJ determined star-forming state to discover the most important drivers of the median $q$ ($q_{med}$). Quiescent galaxies at $z<1$ and $M_{*}>10^{11}M_{\odot}$ are rounder than those at lower masses, consistent with the hypothesis that they have grown significantly through dry merging. The massive quiescent galaxies at higher redshift become flatter, and are as flat as star forming massive galaxies at $2.5<z<3.5$, consistent with formation through direct transformations or wet mergers. We find that in quiescent galaxies, correlations with $q_{med}$ and $M_{*}$, $z$ and $r_{e}$ are driven by the evolution in the sérsic index ($n$), consistent with the growing accumulation of minor mergers at lower redshift. Interestingly, $n$ does not drive these trends fully in star-forming galaxies. Instead, the strongest predictor of $q$ in star-forming galaxies is the effective radius, where larger galaxies are flatter. Our findings suggest that $q_{med}$ is tracing bulge-to-total ($B/T$) galaxy ratio which would explain why smaller/more massive star-forming galaxies are rounder than their extended/less massive analogues, although it is unclear why sérsic index correlates more weakly with flattening for star forming galaxies than for quiescent galaxies.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
CLEAR I: Ages and Metallicities of Quiescent Galaxies at $\mathbf{1.0 < z < 1.8}$ Derived from Deep Hubble Space Telescope Grism Data
Authors:
Vicente Estrada-Carpenter,
Casey Papovich,
Ivelina Momcheva,
Gabriel Brammer,
James Long,
Ryan F. Quadri,
Joanna Bridge,
Mark Dickinson,
Henry Ferguson,
Steven Finkelstein,
Mauro Giavalisco,
Catherine M. Gosmeyer,
Jennifer Lotz,
Brett Salmon,
Rosalind E. Skelton,
Jonathan R. Trump,
Benjamin Weiner
Abstract:
We use deep \textit{Hubble Space Telescope} spectroscopy to constrain the metallicities and (\editone{light-weighted}) ages of massive ($\log M_\ast/M_\odot\gtrsim10$) galaxies selected to have quiescent stellar populations at $1.0<z<1.8$. The data include 12--orbit depth coverage with the WFC3/G102 grism covering $\sim$ $8,000<λ<11,500$~Å\, at a spectral resolution of $R\sim 210$ taken as part of…
▽ More
We use deep \textit{Hubble Space Telescope} spectroscopy to constrain the metallicities and (\editone{light-weighted}) ages of massive ($\log M_\ast/M_\odot\gtrsim10$) galaxies selected to have quiescent stellar populations at $1.0<z<1.8$. The data include 12--orbit depth coverage with the WFC3/G102 grism covering $\sim$ $8,000<λ<11,500$~Å\, at a spectral resolution of $R\sim 210$ taken as part of the CANDELS Lyman-$α$ Emission at Reionization (CLEAR) survey. At $1.0<z<1.8$, the spectra cover important stellar population features in the rest-frame optical. We simulate a suite of stellar population models at the grism resolution, fit these to the data for each galaxy, and derive posterior likelihood distributions for metallicity and age. We stack the posteriors for subgroups of galaxies in different redshift ranges that include different combinations of stellar absorption features. Our results give \editone{light-weighted ages of $t_{z \sim 1.1}= 3.2\pm 0.7$~Gyr, $t_{z \sim 1.2}= 2.2\pm 0.6$~Gyr, $t_{z\sim1.3}= 3.1\pm 0.6$~Gyr, and $t_{z\sim1.6}= 2.0 \pm 0.6$~Gyr, \editone{for galaxies at $z\sim 1.1$, 1.2, 1.3, and 1.6. This} implies that most of the massive quiescent galaxies at $1<z<1.8$ had formed $>68$\% of their stellar mass by a redshift of $z>2$}. The posteriors give metallicities of \editone{$Z_{z\sim1.1}=1.16 \pm 0.29$~$Z_\odot$, $Z_{z\sim1.2}=1.05 \pm 0.34$~$Z_\odot$, $Z_{z\sim1.3}=1.00 \pm 0.31$~$Z_\odot$, and $Z_{z\sim1.6}=0.95 \pm 0.39$~$Z_\odot$}. This is evidence that massive galaxies had enriched rapidly to approximately Solar metallicities as early as $z\sim3$.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
The mass, colour, and structural evolution of today's massive galaxies since z~5
Authors:
Allison R. Hill,
Adam Muzzin,
Marijn Franx,
Bart Clauwens,
Corentin Schreiber,
Danilo Marchesini,
Mauro Stefanon,
Ivo Labbe,
Gabriel Brammer,
Karina Caputi,
Johan Fynbo,
Bo Milvang-Jensen,
Rosalind E. Skelton,
Pieter van Dokkum,
Katherine E. Whitaker
Abstract:
In this paper, we use stacking analysis to trace the mass-growth, colour evolution, and structural evolution of present-day massive galaxies ($\log(M_{*}/M_{\odot})=11.5$) out to $z=5$. We utilize the exceptional depth and area of the latest UltraVISTA data release, combined with the depth and unparalleled seeing of CANDELS to gather a large, mass-selected sample of galaxies in the NIR (rest-frame…
▽ More
In this paper, we use stacking analysis to trace the mass-growth, colour evolution, and structural evolution of present-day massive galaxies ($\log(M_{*}/M_{\odot})=11.5$) out to $z=5$. We utilize the exceptional depth and area of the latest UltraVISTA data release, combined with the depth and unparalleled seeing of CANDELS to gather a large, mass-selected sample of galaxies in the NIR (rest-frame optical to UV). Progenitors of present-day massive galaxies are identified via an evolving cumulative number density selection, which accounts for the effects of merging to correct for the systematic biases introduced using a fixed cumulative number density selection, and find progenitors grow in stellar mass by $\approx1.5~\mathrm{dex}$ since $z=5$. Using stacking, we analyze the structural parameters of the progenitors and find that most of the stellar mass content in the central regions was in place by $z\sim2$, and while galaxies continue to assemble mass at all radii, the outskirts experience the largest fractional increase in stellar mass. However, we find evidence of significant stellar mass build up at $r<3~\mathrm{kpc}$ beyond $z>4$ probing an era of significant mass assembly in the interiors of present day massive galaxies. We also compare mass assembly from progenitors in this study to the EAGLE simulation and find qualitatively similar assembly with $z$ at $r<3~\mathrm{kpc}$. We identify $z\sim1.5$ as a distinct epoch in the evolution of massive galaxies where progenitors transitioned from growing in mass and size primarily through in-situ star formation in disks to a period of efficient growth in $r_{e}$ consistent with the minor merger scenario.
△ Less
Submitted 20 February, 2017;
originally announced February 2017.
-
The close pair fraction of BCGs since $z=0.5$: major mergers dominate recent BCG stellar mass growth
Authors:
Danièl N. Groenewald,
Rosalind E. Skelton,
David G. Gilbank,
S. Ilani Loubser
Abstract:
Using the redMaPPer cluster catalogue based on the Sloan Digital Sky Survey (SDSS) photometry, we investigate the importance of major mergers in the stellar mass build-up of brightest cluster galaxies (BCGs) between $0.08 \leq z \leq 0.50$. We use the SDSS spectroscopy, supplemented with spectroscopic observations from the Southern African Large Telescope at higher redshifts, to identify which BCG…
▽ More
Using the redMaPPer cluster catalogue based on the Sloan Digital Sky Survey (SDSS) photometry, we investigate the importance of major mergers in the stellar mass build-up of brightest cluster galaxies (BCGs) between $0.08 \leq z \leq 0.50$. We use the SDSS spectroscopy, supplemented with spectroscopic observations from the Southern African Large Telescope at higher redshifts, to identify which BCGs and nearby companions are potential major merger candidates. We use the pair fraction as a proxy for the merger fraction in order to determine how much stellar mass growth the BCGs have experienced due to major mergers. We observe a weak trend of the BCG pair fraction increasing with decreasing redshift, suggesting that major mergers may become more important towards the present day. Major mergers are found to contribute, on average, $24 \pm 14 $ $(29 \pm 17)$ per cent towards the stellar mass of a present day BCG since $z=0.32$ (0.45), assuming that half of the companion's stellar mass is accreted onto the BCG. Furthermore, using our merger results in conjunction with predictions from two recent semi-analytical models along with observational measurements from the literature, we find that major mergers have sufficient stellar material to account for the stellar mass growth of the intracluster light between $z=0.3$ and $z=0$.
△ Less
Submitted 31 January, 2017;
originally announced January 2017.
-
HST Hα grism spectroscopy of ROLES: a flatter low-mass slope for the z~1 SSFR--mass relation
Authors:
Riona Ramraj,
David G. Gilbank,
Sarah-Louise Blyth,
Rosalind E. Skelton,
Karl Glazebrook,
Richard G. Bower,
Michael L. Balogh
Abstract:
We present measurements of star formation rates (SFRs) for dwarf galaxies (M*~10^8.5 Msun ) at z~1 using near-infrared slitless spectroscopy from the Hubble Space Telescope (HST) by targetting and measuring the luminosity of the Hα emission line. Our sample is derived from the Redshift One LDSS3 Emission Line Survey (ROLES), which used [O II]λ 3727 as a tracer of star formation to target very low…
▽ More
We present measurements of star formation rates (SFRs) for dwarf galaxies (M*~10^8.5 Msun ) at z~1 using near-infrared slitless spectroscopy from the Hubble Space Telescope (HST) by targetting and measuring the luminosity of the Hα emission line. Our sample is derived from the Redshift One LDSS3 Emission Line Survey (ROLES), which used [O II]λ 3727 as a tracer of star formation to target very low stellar masses down to very low SFRs (~0.1 Msun yr^-1) at this epoch. Dust corrections are estimated using SED-fits and we find, by comparison with other studies using Balmer decrement dust corrections, that we require a smaller ratio between the gas phase and stellar extinction than the nominal Calzetti relation, in agreement with recent findings by other studies. By stacking the WFC3 spectra at the redshifts obtained from ground-based [O II] detections, we are able to push the WFC3 spectra to much lower SFRs and obtain the most complete spectroscopic measurement of the low mass end of the SSFR--mass relation to date. We measure a flatter low mass power law slope (-0.47 +/- 0.04) than found by other (shallower) Hα-selected samples (\approx -1), although still somewhat steeper than that predicted by the EAGLE simulation (-0.14 +/- 0.05), hinting at possible missing physics not modelled by EAGLE or remaining incompleteness for our Hα data.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
The Number Density Evolution of Extreme Emission Line Galaxies in 3D-HST: Results from a Novel Automated Line Search Technique for Slitless Spectroscopy
Authors:
Michael V. Maseda,
Arjen van der Wel,
Hans-Walter Rix,
Ivelina Momcheva,
Gabriel B. Brammer,
Marijn Franx,
Britt F. Lundgren,
Rosalind E. Skelton,
Katherine E. Whitaker
Abstract:
The multiplexing capability of slitless spectroscopy is a powerful asset in creating large spectroscopic datasets, but issues such as spectral confusion make the interpretation of the data challenging. Here we present a new method to search for emission lines in the slitless spectroscopic data from the 3D-HST survey utilizing the Wide-Field Camera 3 on board the Hubble Space Telescope. Using a nov…
▽ More
The multiplexing capability of slitless spectroscopy is a powerful asset in creating large spectroscopic datasets, but issues such as spectral confusion make the interpretation of the data challenging. Here we present a new method to search for emission lines in the slitless spectroscopic data from the 3D-HST survey utilizing the Wide-Field Camera 3 on board the Hubble Space Telescope. Using a novel statistical technique, we can detect compact (extended) emission lines at 90% completeness down to fluxes of 1.5 (3.0) times 10^{-17} erg/s/cm^2, close to the noise level of the grism exposures, for objects detected in the deep ancillary photometric data. Unlike previous methods, the Bayesian nature allows for probabilistic line identifications, namely redshift estimates, based on secondary emission line detections and/or photometric redshift priors. As a first application, we measure the comoving number density of Extreme Emission Line Galaxies (restframe [O III] 5007 equivalent widths in excess of 500 Angstroms). We find that these galaxies are nearly 10 times more common above z~1.5 than at z<0.5. With upcoming large grism surveys such as Euclid and WFIRST as well as grisms featuring prominently on the NIRISS and NIRCam instruments on James Webb Space Telescope, methods like the one presented here will be crucial for constructing emission line redshift catalogs in an automated and well-understood manner.
△ Less
Submitted 16 January, 2018; v1 submitted 4 August, 2016;
originally announced August 2016.
-
The Evolution of the Fractions of Quiescent and Star-forming Galaxies as a Function of Stellar Mass Since z=3: Increasing Importance of Massive, Dusty Star-forming Galaxies in the Early Universe
Authors:
Nicholas S. Martis,
Danilo Marchesini,
Gabriel B. Brammer,
Adam Muzzin,
Ivo Labbé,
Ivelina G. Momcheva,
Rosalind E. Skelton,
Mauro Stefanon,
Pieter G. van Dokkum,
Katherine E. Whitaker
Abstract:
Using the UltraVISTA DR1 and 3D-HST catalogs, we construct a stellar-mass-complete sample, unique for its combination of surveyed volume and depth, to study the evolution of the fractions of quiescent galaxies, moderately unobscured star-forming galaxies, and dusty star-forming galaxies as a function of stellar mass over the redshift interval $0.2 \le z \le 3.0$. We show that the role of dusty sta…
▽ More
Using the UltraVISTA DR1 and 3D-HST catalogs, we construct a stellar-mass-complete sample, unique for its combination of surveyed volume and depth, to study the evolution of the fractions of quiescent galaxies, moderately unobscured star-forming galaxies, and dusty star-forming galaxies as a function of stellar mass over the redshift interval $0.2 \le z \le 3.0$. We show that the role of dusty star-forming galaxies within the overall galaxy population becomes more important with increasing stellar mass, and grows rapidly with increasing redshift. Specifically, dusty star-forming galaxies dominate the galaxy population with $\log{(M_{\rm star}/M_{\odot})} \gtrsim 10.3$ at $z\gtrsim2$. The ratio of dusty and non-dusty star-forming galaxies as a function of stellar mass changes little with redshift. Dusty star-forming galaxies dominate the star-forming population at $\log{(M_{\rm star}/M_{\odot})} \gtrsim 10.0-10.5$, being a factor of $\sim$3-5 more common, while unobscured star-forming galaxies dominate at $\log{(M_{\rm star}/M_{\odot})} \lesssim 10$. At $\log{(M_{\rm star}/M_{\odot})} > 10.5$, red galaxies dominate the galaxy population at all redshift $z<3$, either because they are quiescent (at late times) or dusty star-forming (in the early universe).
△ Less
Submitted 25 July, 2016; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Ages of massive galaxies at $0.5 < z < 2.0$ from 3D-HST rest-frame optical spectroscopy
Authors:
Mattia Fumagalli,
Marijn Franx,
Pieter van Dokkum,
Katherine E. Whitaker,
Rosalind E. Skelton,
Gabriel Brammer,
Erica Nelson,
Michael Maseda,
Ivelina Momcheva,
Mariska Kriek,
Ivo Labbé,
Britt Lundgren,
Hans-Walter Rix
Abstract:
We present low-resolution near-infrared stacked spectra from the 3D-HST survey up to $z=2.0$ and fit them with commonly used stellar population synthesis models: BC03 (Bruzual & Charlot, 2003), FSPS10 (Flexible Stellar Population Synthesis, Conroy & Gunn 2010), and FSPS-C3K (Conroy, Kurucz, Cargile, Castelli, in prep). The accuracy of the grism redshifts allows the unambiguous detection of many em…
▽ More
We present low-resolution near-infrared stacked spectra from the 3D-HST survey up to $z=2.0$ and fit them with commonly used stellar population synthesis models: BC03 (Bruzual & Charlot, 2003), FSPS10 (Flexible Stellar Population Synthesis, Conroy & Gunn 2010), and FSPS-C3K (Conroy, Kurucz, Cargile, Castelli, in prep). The accuracy of the grism redshifts allows the unambiguous detection of many emission and absorption features, and thus a first systematic exploration of the rest-frame optical spectra of galaxies up to $z=2$. We select massive galaxies ($\rm log(M_{*} / M_{\odot}) > 10.8$), we divide them into quiescent and star-forming via a rest-frame color-color technique, and we median-stack the samples in 3 redshift bins between $z=0.5$ and $z=2.0$. We find that stellar population models fit the observations well at wavelengths below $\rm 6500 Å$ rest-frame, but show systematic residuals at redder wavelengths. The FSPS-C3K model generally provides the best fits (evaluated with a $χ^2_{red}$ statistics) for quiescent galaxies, while BC03 performs the best for star-forming galaxies. The stellar ages of quiescent galaxies implied by the models, assuming solar metallicity, vary from 4 Gyr at $z \sim 0.75$ to 1.5 Gyr at $z \sim 1.75$, with an uncertainty of a factor of 2 caused by the unknown metallicity. On average the stellar ages are half the age of the Universe at these redshifts. We show that the inferred evolution of ages of quiescent galaxies is in agreement with fundamental plane measurements, assuming an 8 Gyr age for local galaxies. For star-forming galaxies the inferred ages depend strongly on the stellar population model and the shape of the assumed star-formation history.
△ Less
Submitted 8 March, 2016;
originally announced March 2016.
-
A Remarkably Luminous Galaxy at z=11.1 Measured with Hubble Space Telescope Grism Spectroscopy
Authors:
P. A. Oesch,
G. Brammer,
P. G. van Dokkum,
G. D. Illingworth,
R. J. Bouwens,
I. Labbe,
M. Franx,
I. Momcheva,
M. L. N. Ashby,
G. G. Fazio,
V. Gonzalez,
B. Holden,
D. Magee,
R. E. Skelton,
R. Smit,
L. R. Spitler,
M. Trenti,
S. P. Willner
Abstract:
We present Hubble WFC3/IR slitless grism spectra of a remarkably bright $z\gtrsim10$ galaxy candidate, GN-z11, identified initially from CANDELS/GOODS-N imaging data. A significant spectroscopic continuum break is detected at $λ=1.47\pm0.01~μ$m. The new grism data, combined with the photometric data, rule out all plausible lower redshift solutions for this source. The only viable solution is that…
▽ More
We present Hubble WFC3/IR slitless grism spectra of a remarkably bright $z\gtrsim10$ galaxy candidate, GN-z11, identified initially from CANDELS/GOODS-N imaging data. A significant spectroscopic continuum break is detected at $λ=1.47\pm0.01~μ$m. The new grism data, combined with the photometric data, rule out all plausible lower redshift solutions for this source. The only viable solution is that this continuum break is the Ly$α$ break redshifted to ${z_\mathrm{grism}=11.09^{+0.08}_{-0.12}}$, just $\sim$400 Myr after the Big Bang. This observation extends the current spectroscopic frontier by 150 Myr to well before the Planck (instantaneous) cosmic reionization peak at z~8.8, demonstrating that galaxy build-up was well underway early in the reionization epoch at z>10. GN-z11 is remarkably and unexpectedly luminous for a galaxy at such an early time: its UV luminosity is 3x larger than L* measured at z~6-8. The Spitzer IRAC detections up to 4.5 $μ$m of this galaxy are consistent with a stellar mass of ${\sim10^{9}~M_\odot}$. This spectroscopic redshift measurement suggests that the James Webb Space Telescope (JWST) will be able to similarly and easily confirm such sources at z>10 and characterize their physical properties through detailed spectroscopy. Furthermore, WFIRST, with its wide-field near-IR imaging, would find large numbers of similar galaxies and contribute greatly to JWST's spectroscopy, if it is launched early enough to overlap with JWST.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
Spatially-resolved dust maps from Balmer decrements in galaxies at z~1.4
Authors:
Erica June Nelson,
Pieter G. van Dokkum,
Ivelina G. Momcheva,
Gabriel B. Brammer,
Stijn Wuyts,
Marijn Franx,
Natascha M. Forster Schreiber,
Katherine E. Whitaker,
Rosalind E. Skelton
Abstract:
We derive average radial gradients in the dust attenuation towards HII regions in 609 galaxies at z~1.4, using measurements of the Balmer decrement out to r~3kpc. The Balmer decrements are derived from spatially resolved maps of Halpha and Hbeta emission from the 3D-HST survey. We find that with increasing stellar mass (M) both the normalization and strength of the gradient in dust attenuation inc…
▽ More
We derive average radial gradients in the dust attenuation towards HII regions in 609 galaxies at z~1.4, using measurements of the Balmer decrement out to r~3kpc. The Balmer decrements are derived from spatially resolved maps of Halpha and Hbeta emission from the 3D-HST survey. We find that with increasing stellar mass (M) both the normalization and strength of the gradient in dust attenuation increases. Galaxies with a mean mass of <log(M)> = 9.2Msun have little dust attenuation at all radii, whereas galaxies with <log(M)>= 10.2Msun have dust attenuation toward Halpha A(Halpha)~2mag in their central regions. We parameterize this as A(Halpha) = b + c log(r), with b = 0.9 + 1.0 log(M10), c = -1.9 - 2.2 log(M10), r in kpc, and M10 the stellar mass in units of 10^10Msun. This expression can be used to correct spatially resolved measurements of Halpha to radial distributions of star formation. When applied to our data, we find that the star formation rates in the central r<1kpc of galaxies in the highest mass bin are ~ 6 Msun/yr, six times higher than before correction and approximately half of the total star formation rate of these galaxies. If this high central star formation rate is maintained for several Gyr, a large fraction of the stars in present-day bulges likely formed in-situ.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.
-
Leveraging 3D-HST Grism Redshifts to Quantify Photometric Redshift Performance
Authors:
Rachel Bezanson,
David A. Wake,
Gabriel B. Brammer,
Pieter G. van Dokkum,
Marijn Franx,
Ivo Labbé,
Joel Leja,
Ivelina G. Momcheva,
Erica J. Nelson,
Ryan F. Quadri,
Rosalind E. Skelton,
Benjamin J. Weiner,
Katherine E. Whitaker
Abstract:
We present a study of photometric redshift accuracy in the 3D-HST photometric catalogs, using 3D-HST grism redshifts to quantify and dissect trends in redshift accuracy for galaxies brighter than $H_{F140W}<24$ with an unprecedented and representative high-redshift galaxy sample. We find an average scatter of $0.0197\pm0.0003(1+z)$ in the Skelton et al. (2014) photometric redshifts. Photometric re…
▽ More
We present a study of photometric redshift accuracy in the 3D-HST photometric catalogs, using 3D-HST grism redshifts to quantify and dissect trends in redshift accuracy for galaxies brighter than $H_{F140W}<24$ with an unprecedented and representative high-redshift galaxy sample. We find an average scatter of $0.0197\pm0.0003(1+z)$ in the Skelton et al. (2014) photometric redshifts. Photometric redshift accuracy decreases with magnitude and redshift, but does not vary monotonically with color or stellar mass. The 1-$σ$ scatter lies between $0.01-0.03$(1+z) for galaxies of all masses and colors below $z<2.5$ (for $H_{F140W}{<}24$), with the exception of a population of very red ($U-V > 2$), dusty star-forming galaxies for which the scatter increases to $\sim0.1(1+z)$. Although the overall photometric redshift accuracy for quiescent galaxies is better than for star-forming galaxies, scatter depends more strongly on magnitude and redshift than on galaxy type. We verify these trends using the redshift distributions of close pairs and extend the analysis to fainter objects, where photometric redshift errors further increase to $\sim0.046(1+z)$ at $H_{F160W}=26$. We demonstrate that photometric redshift accuracy is strongly filter-dependent and quantify the contribution of multiple filter combinations. We evaluate the widths of redshift probability distribution functions and find that error estimates are underestimated by a factor of $\sim1.1-1.6$, but that uniformly broadening the distribution does not adequately account for fitting outliers. Finally, we suggest possible applications of these data in planning for current and future surveys and simulate photometric redshift performance in the LSST, DES, and combined DES and VHS surveys.
△ Less
Submitted 23 October, 2015;
originally announced October 2015.
-
The 3D-HST Survey: Hubble Space Telescope WFC3/G141 grism spectra, redshifts, and emission line measurements for $\sim 100,000$ galaxies
Authors:
Ivelina G. Momcheva,
Gabriel B. Brammer,
Pieter G. van Dokkum,
Rosalind E. Skelton,
Katherine E. Whitaker,
Erica J. Nelson,
Mattia Fumagalli,
Michael V. Maseda,
Joel Leja,
Marijn Franx,
Hans-Walter Rix,
Rachel Bezanson,
Elisabete Da Cunha,
Claire Dickey,
Natascha M. Förster Schreiber,
Garth Illingworth,
Mariska Kriek,
Ivo Labbé,
Johannes Ulf Lange,
Britt F. Lundgren,
Daniel Magee,
Danilo Marchesini,
Pascal Oesch,
Camilla Pacifici,
Shannon G. Patel
, et al. (5 additional authors not shown)
Abstract:
We present reduced data and data products from the 3D-HST survey, a 248-orbit HST Treasury program. The survey obtained WFC3 G141 grism spectroscopy in four of the five CANDELS fields: AEGIS, COSMOS, GOODS-S, and UDS, along with WFC3 $H_{140}$ imaging, parallel ACS G800L spectroscopy, and parallel $I_{814}$ imaging. In a previous paper (Skelton et al. 2014) we presented photometric catalogs in the…
▽ More
We present reduced data and data products from the 3D-HST survey, a 248-orbit HST Treasury program. The survey obtained WFC3 G141 grism spectroscopy in four of the five CANDELS fields: AEGIS, COSMOS, GOODS-S, and UDS, along with WFC3 $H_{140}$ imaging, parallel ACS G800L spectroscopy, and parallel $I_{814}$ imaging. In a previous paper (Skelton et al. 2014) we presented photometric catalogs in these four fields and in GOODS-N, the fifth CANDELS field. Here we describe and present the WFC3 G141 spectroscopic data, again augmented with data from GO-1600 in GOODS-N. The data analysis is complicated by the fact that no slits are used: all objects in the WFC3 field are dispersed, and many spectra overlap. We developed software to automatically and optimally extract interlaced 2D and 1D spectra for all objects in the Skelton et al. (2014) photometric catalogs. The 2D spectra and the multi-band photometry were fit simultaneously to determine redshifts and emission line strengths, taking the morphology of the galaxies explicitly into account. The resulting catalog has 98,663 measured redshifts and line strengths down to $JH_{IR}\leq 26$ and 22,548 with $JH_{IR}\leq 24$, where we comfortably detect continuum emission. Of this sample 5,459 galaxies are at $z>1.5$ and 9,621 are at $0.7<z<1.5$, where H$α$ falls in the G141 wavelength coverage. Based on comparisons with ground-based spectroscopic redshifts, and on analyses of paired galaxies and repeat observations, the typical redshift error for $JH_{IR}\leq 24$ galaxies in our catalog is $σ_z \approx 0.003 \times (1+z)$, i.e., one native WFC3 pixel. The $3σ$ limit for emission line fluxes of point sources is $1.5\times10^{-17}$ ergs s$^{-1}$ cm$^{-2}$. We show various representations of the full dataset, as well as individual examples that highlight the range of spectra that we find in the survey.
△ Less
Submitted 29 October, 2015; v1 submitted 7 October, 2015;
originally announced October 2015.
-
Galaxy Structure as a Driver of the Star Formation Sequence Slope and Scatter
Authors:
Katherine E. Whitaker,
Marijn Franx,
Rachel Bezanson,
Gabriel B. Brammer,
Pieter G. van Dokkum,
Mariska T. Kriek,
Ivo Labbe,
Joel Leja,
Ivelina G. Momcheva,
Erica J. Nelson,
Jane R. Rigby,
Hans-Walter Rix,
Rosalind E. Skelton,
Arjen van der Wel,
Stijn Wuyts
Abstract:
It is well established that (1) star-forming galaxies follow a relation between their star formation rate (SFR) and stellar mass (M$_{\star}$), the "star-formation sequence", and (2) the SFRs of galaxies correlate with their structure, where star-forming galaxies are less concentrated than quiescent galaxies at fixed mass. Here, we consider whether the scatter and slope of the star-formation seque…
▽ More
It is well established that (1) star-forming galaxies follow a relation between their star formation rate (SFR) and stellar mass (M$_{\star}$), the "star-formation sequence", and (2) the SFRs of galaxies correlate with their structure, where star-forming galaxies are less concentrated than quiescent galaxies at fixed mass. Here, we consider whether the scatter and slope of the star-formation sequence is correlated with systematic variations in the Sersic indices, $n$, of galaxies across the SFR-M$_{\star}$ plane. We use a mass-complete sample of 23,848 galaxies at $0.5<z<2.5$ selected from the 3D-HST photometric catalogs. Galaxy light profiles parameterized by $n$ are based on Hubble Space Telescope CANDELS near-infrared imaging. We use a single SFR indicator empirically-calibrated from stacks of Spitzer/MIPS 24$μ$m imaging, adding the unobscured and obscured star formation. We find that the scatter of the star-formation sequence is related in part to galaxy structure; the scatter due to variations in $n$ at fixed mass for star-forming galaxies ranges from 0.14$\pm$0.02 dex at $z\sim2$ to 0.30$\pm$0.04 dex at $z<1$. While the slope of the log(SFR)-log(M$_{\star}$) relation is of order unity for disk-like galaxies, galaxies with $n>2$ (implying more dominant bulges) have significantly lower SFR/M$_{\star}$ than the main ridgeline of the star-formation sequence. These results suggest that bulges in massive $z\sim2$ galaxies are actively building up, where the stars in the central concentration are relatively young. At $z<1$, the presence of older bulges within star-forming galaxies lowers global SFR/M$_{\star}$, decreasing the slope and contributing significantly to the scatter of the star-formation sequence.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Where stars form: inside-out growth and coherent star formation from HST Halpha maps of 2676 galaxies across the main sequence at z~1
Authors:
Erica June Nelson,
Pieter G. van Dokkum,
Natascha M. Förster Schreiber,
Marijn Franx,
Gabriel B. Brammer,
Ivelina G. Momcheva,
Stijn Wuyts,
Katherine E. Whitaker,
Rosalind E. Skelton,
Mattia Fumagalli,
Mariska Kriek,
Ivo Labbé,
Joel Leja,
Hans-Walter Rix,
Linda J. Tacconi,
Arjen van der Wel,
Frank C. van den Bosch,
Pascal A. Oesch,
Claire Dickey,
Johannes Ulf Lange
Abstract:
We present Ha maps at 1kpc spatial resolution for star-forming galaxies at z~1, made possible by the WFC3 grism on HST. Employing this capability over all five 3D-HST/CANDELS fields provides a sample of 2676 galaxies. By creating deep stacked Halpha (Ha) images, we reach surface brightness limits of 1x10^-18\erg\s\cm^2\arcsec^2, allowing us to map the distribution of ionized gas out to >10kpc for…
▽ More
We present Ha maps at 1kpc spatial resolution for star-forming galaxies at z~1, made possible by the WFC3 grism on HST. Employing this capability over all five 3D-HST/CANDELS fields provides a sample of 2676 galaxies. By creating deep stacked Halpha (Ha) images, we reach surface brightness limits of 1x10^-18\erg\s\cm^2\arcsec^2, allowing us to map the distribution of ionized gas out to >10kpc for typical L* galaxies at this epoch. We find that the spatial extent of the Ha distribution increases with stellar mass as r(Ha)[kpc]=1.5(Mstars/10^10Msun)^0.23. Furthermore, the Ha emission is more extended than the stellar continuum emission, consistent with inside-out assembly of galactic disks. This effect, however, is mass dependent with r(Ha)/r(stars)=1.1(M/10^10Msun)^0.054, such that at low masses r(Ha)~r(stars). We map the Ha distribution as a function of SFR(IR+UV) and find evidence for `coherent star formation' across the SFR-M plane: above the main sequence, Ha is enhanced at all radii; below the main sequence, Ha is depressed at all radii. This suggests that at all masses the physical processes driving the enhancement or suppression of star formation act throughout the disks of galaxies. It also confirms that the scatter in the star forming main sequence is real and caused by variations in the star formation rate at fixed mass. At high masses (10^10.5<M/Msun<10^11), above the main sequence, Ha is particularly enhanced in the center, plausibly building bulges and/or supermassive black holes. Below the main sequence, the star forming disks are more compact and a strong central dip in the EW(Ha), and the inferred specific star formation rate, appears. Importantly though, across the entirety of the SFR-M plane, the absolute star formation rate as traced by Ha is always centrally peaked, even in galaxies below the main sequence.
△ Less
Submitted 14 July, 2015;
originally announced July 2015.
-
Forming Compact Massive Galaxies
Authors:
Pieter G. van Dokkum,
Erica June Nelson,
Marijn Franx,
Pascal Oesch,
Ivelina Momcheva,
Gabriel Brammer,
Natascha M. Forster Schreiber,
Rosalind E. Skelton,
Katherine E. Whitaker,
Arjen van der Wel,
Rachel Bezanson,
Mattia Fumagalli,
Garth D. Illingworth,
Mariska Kriek,
Joel Leja,
Stijn Wuyts
Abstract:
In this paper we study a key phase in the formation of massive galaxies: the transition of star forming galaxies into massive (M_stars~10^11 Msun), compact (r_e~1 kpc) quiescent galaxies, which takes place from z~3 to z~1.5. We use HST grism redshifts and extensive photometry in all five 3D-HST/CANDELS fields, more than doubling the area used previously for such studies, and combine these data wit…
▽ More
In this paper we study a key phase in the formation of massive galaxies: the transition of star forming galaxies into massive (M_stars~10^11 Msun), compact (r_e~1 kpc) quiescent galaxies, which takes place from z~3 to z~1.5. We use HST grism redshifts and extensive photometry in all five 3D-HST/CANDELS fields, more than doubling the area used previously for such studies, and combine these data with Keck MOSFIRE and NIRSPEC spectroscopy. We first confirm that a population of massive, compact, star forming galaxies exists at z~2, using K-band spectroscopy of 25 of these objects at 2.0<z<2.5. They have a median NII/Halpha ratio of 0.6, are highly obscured with SFR(tot)/SFR(Halpha)~10, and have a large range of observed line widths. We infer from the kinematics and spatial distribution of Halpha that the galaxies have rotating disks of ionized gas that are a factor of ~2 more extended than the stellar distribution. By combining measurements of individual galaxies, we find that the kinematics are consistent with a nearly Keplerian fall-off from V_rot~500 km/s at 1 kpc to V_rot~250 km/s at 7 kpc, and that the total mass out to this radius is dominated by the dense stellar component. Next, we study the size and mass evolution of the progenitors of compact massive galaxies. Even though individual galaxies may have had complex histories with periods of compaction and mergers, we show that the population of progenitors likely followed a simple inside-out growth track in the size-mass plane of d(log r_e) ~ 0.3 d(log M_stars). This mode of growth gradually increases the stellar mass within a fixed physical radius, and galaxies quench when they reach a stellar density or velocity dispersion threshold. As shown in other studies, the mode of growth changes after quenching, as dry mergers take the galaxies on a relatively steep track in the size-mass plane.
△ Less
Submitted 19 September, 2015; v1 submitted 9 June, 2015;
originally announced June 2015.
-
On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures
Authors:
A. Amendola,
E. Hernandez-Nava,
R. Goodall,
I. Todd,
R. E. Skelton,
F. Fraternali
Abstract:
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the addit…
▽ More
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the additive manufacturing phase, when Spectra cross-strings are added to the 3D printed models, and a suitable state of internal prestress is applied to the structure. The experimental part of the study shows that the examined structures feature sitffening-type elastic response under large or moderately large axial strains induced by compressive loading. Such a geometrically nonlinear behavior confirms previous theoretical results available in the literature, and paves the way to the use of tensegrity prisms and columns as innovative mechanical metamaterials and smart devices.
△ Less
Submitted 5 April, 2015;
originally announced April 2015.
-
The MOSFIRE Deep Evolution Field (MOSDEF) Survey: Rest-Frame Optical Spectroscopy for ~1500 H-Selected Galaxies at 1.37 < z < 3.8
Authors:
Mariska Kriek,
Alice E. Shapley,
Naveen A. Reddy,
Brian Siana,
Alison L. Coil,
Bahram Mobasher,
William R. Freeman,
Laura de Groot,
Sedona H. Price,
Ryan Sanders,
Irene Shivaei,
Gabriel B. Brammer,
Ivelina G. Momcheva,
Rosalind E. Skelton,
Pieter G. van Dokkum,
Katherine E. Whitaker,
James Aird,
Mojegan Azadi,
Marc Kassis,
James S. Bullock,
Charlie Conroy,
Romeel Dave,
Dusan Keres,
Mark Krumholz
Abstract:
In this paper we present the MOSFIRE Deep Evolution Field (MOSDEF) survey. The MOSDEF survey aims to obtain moderate-resolution (R=3000-3650) rest-frame optical spectra (~3700-7000 Angstrom) for ~1500 galaxies at 1.37<z<3.80 in three well-studied CANDELS fields: AEGIS, COSMOS, and GOODS-N. Targets are selected in three redshift intervals: 1.37<z<1.70, 2.09<z<2.61, and 2.95<z<3.80, down to fixed H_…
▽ More
In this paper we present the MOSFIRE Deep Evolution Field (MOSDEF) survey. The MOSDEF survey aims to obtain moderate-resolution (R=3000-3650) rest-frame optical spectra (~3700-7000 Angstrom) for ~1500 galaxies at 1.37<z<3.80 in three well-studied CANDELS fields: AEGIS, COSMOS, and GOODS-N. Targets are selected in three redshift intervals: 1.37<z<1.70, 2.09<z<2.61, and 2.95<z<3.80, down to fixed H_AB (F160W) magnitudes of 24.0, 24.5 and 25.0, respectively, using the photometric and spectroscopic catalogs from the 3D-HST survey. We target both strong nebular emission lines (e.g., [OII], Hbeta, [OIII], 5008, Halpha, [NII], and [SII]) and stellar continuum and absorption features (e.g., Balmer lines, Ca-II H and K, Mgb, 4000 Angstrom break). Here we present an overview of our survey, the observational strategy, the data reduction and analysis, and the sample characteristics based on spectra obtained during the first 24 nights. To date, we have completed 21 masks, obtaining spectra for 591 galaxies. For ~80% of the targets we derive a robust redshift from either emission or absorption lines. In addition, we confirm 55 additional galaxies, which were serendipitously detected. The MOSDEF galaxy sample includes unobscured star-forming, dusty star-forming, and quiescent galaxies and spans a wide range in stellar mass (~10^9-10^11.5 Msol) and star formation rate (~10^0-10^3 Msol/yr). The spectroscopically confirmed sample is roughly representative of an H-band limited galaxy sample at these redshifts. With its large sample size, broad diversity in galaxy properties, and wealth of available ancillary data, MOSDEF will transform our understanding of the stellar, gaseous, metal, dust, and black hole content of galaxies during the time when the universe was most active.
△ Less
Submitted 14 April, 2015; v1 submitted 4 December, 2014;
originally announced December 2014.
-
Parametric Design of Minimal Mass Tensegrity Bridges Under Yielding and Buckling Constraints
Authors:
Gerardo Carpentieri,
Robert E. Skelton,
Fernando Fraternali
Abstract:
This paper investigates the use of the most fundamental elements; cables for tension and bars for compression, in the search for the most efficient bridges. Stable arrangements of these elements are called tensegrity structures. We show herein the minimal mass arrangement of these basic elements to satisfy both yielding and buckling constraints. We show that the minimal mass solution for a simply-…
▽ More
This paper investigates the use of the most fundamental elements; cables for tension and bars for compression, in the search for the most efficient bridges. Stable arrangements of these elements are called tensegrity structures. We show herein the minimal mass arrangement of these basic elements to satisfy both yielding and buckling constraints. We show that the minimal mass solution for a simply-supported bridge subject to buckling constraints matches Michell's 1904 paper which treats the case of only yield constraints, even though our boundary conditions differ. The necessary and sufficient condition is given for the minimal mass bridge to lie totally above (or below) deck. Furthermore this condition depends only on material properties. If one ignores joint mass, and considers only bridges above deck level, the optimal complexity (number of elements in the bridge) tends toward infinity (producing a material continuum). If joint mass is considered then the optimal complexity is finite. The optimal (minimal mass) bridge below deck has the smallest possible complexity (and therefore cheaper to build), and under reasonable material choices, yields the smallest mass bridge.
△ Less
Submitted 17 December, 2014; v1 submitted 28 November, 2014;
originally announced November 2014.
-
On the importance of using appropriate spectral models to derive physical properties of galaxies at 0.7<z<2.8
Authors:
Camilla Pacifici,
Elisabete da Cunha,
Stéphane Charlot,
Hans-Walter Rix,
Mattia Fumagalli,
Arjen van der Wel,
Marijn Franx,
Michael V. Maseda,
Pieter G. van Dokkum,
Gabriel B. Brammer,
Ivelina Momcheva,
Rosalind E. Skelton,
Katherine Whitaker,
Joel Leja,
Britt Lundgren,
Susan A. Kassin,
Sukyoung K. Yi
Abstract:
Interpreting observations of distant galaxies in terms of constraints on physical parameters - such as stellar mass, star-formation rate (SFR) and dust optical depth - requires spectral synthesis modelling. We analyse the reliability of these physical parameters as determined under commonly adopted `classical' assumptions: star-formation histories assumed to be exponentially declining functions of…
▽ More
Interpreting observations of distant galaxies in terms of constraints on physical parameters - such as stellar mass, star-formation rate (SFR) and dust optical depth - requires spectral synthesis modelling. We analyse the reliability of these physical parameters as determined under commonly adopted `classical' assumptions: star-formation histories assumed to be exponentially declining functions of time, a simple dust law and no emission-line contribution. Improved modelling techniques and data quality now allow us to use a more sophisticated approach, including realistic star-formation histories, combined with modern prescriptions for dust attenuation and nebular emission (Pacifici et al. 2012). We present a Bayesian analysis of the spectra and multi-wavelength photometry of 1048 galaxies from the 3D-HST survey in the redshift range 0.7<z<2.8 and in the stellar mass range 9<log(M/Mo)<12. We find that, using the classical spectral library, stellar masses are systematically overestimated (~0.1 dex) and SFRs are systematically underestimated (~0.6 dex) relative to our more sophisticated approach. We also find that the simultaneous fit of photometric fluxes and emission-line equivalent widths helps break a degeneracy between SFR and optical depth of the dust, reducing the uncertainties on these parameters. Finally, we show how the biases of classical approaches can affect the correlation between stellar mass and SFR for star-forming galaxies (the `Star-Formation Main Sequence'). We conclude that the normalization, slope and scatter of this relation strongly depend on the adopted approach and demonstrate that the classical, oversimplified approach cannot recover the true distribution of stellar mass and SFR.
△ Less
Submitted 20 November, 2014;
originally announced November 2014.
-
Multiscale tunability of solitary wave dynamics in tensegrity metamaterials
Authors:
Fernando Fraternali,
Gerardo Carpentieri,
Ada Amendola,
Robert E. Skelton,
Vitali F. Nesterenko
Abstract:
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction w…
▽ More
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction wave followed by oscillatory tail with progressively decreasing amplitude. Interaction of a compression solitary pulse with an interface between elastically hardening and softening materials having correspondingly low-high acoustic impedances demonstrates anomalous behavior: a train of reflected compression solitary waves in the low impedance material; and a transmitted solitary rarefaction wave with oscillatory tail in high impedance material. The interaction of a rarefaction solitary wave with an interface between elastically softening and elastically hardening materials with high-low impedances also demonstrates anomalous behavior: a reflected solitary rarefaction wave with oscillatory tail in the high impedance branch; and a delayed train of transmitted compression solitary pulses in the low impedance branch. These anomalous impact transformation properties may allow for the design of ultimate impact mitigation devices without relying on energy dissipation.
△ Less
Submitted 16 October, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
-
Constraining the Low-Mass Slope of the Star Formation Sequence at 0.5<z<2.5
Authors:
Katherine E. Whitaker,
Marijn Franx,
Joel Leja,
Pieter G. van Dokkum,
Alaina Henry,
Rosalind E. Skelton,
Mattia Fumagalli,
Ivelina G. Momcheva,
Gabriel B. Brammer,
Ivo Labbe,
Erica J. Nelson,
Jane R. Rigby
Abstract:
We constrain the slope of the star formation rate ($\logΨ$) to stellar mass ($\log\mathrm{M_{\star}}$) relation down to $\log(\mathrm{M_{\star}/M_{\odot}})=8.4$ ($\log(\mathrm{M_{\star}/M_{\odot}})=9.2$) at $z=0.5$ ($z=2.5$) with a mass-complete sample of 39,106 star-forming galaxies selected from the 3D-HST photometric catalogs, using deep photometry in the CANDELS fields. For the first time, we…
▽ More
We constrain the slope of the star formation rate ($\logΨ$) to stellar mass ($\log\mathrm{M_{\star}}$) relation down to $\log(\mathrm{M_{\star}/M_{\odot}})=8.4$ ($\log(\mathrm{M_{\star}/M_{\odot}})=9.2$) at $z=0.5$ ($z=2.5$) with a mass-complete sample of 39,106 star-forming galaxies selected from the 3D-HST photometric catalogs, using deep photometry in the CANDELS fields. For the first time, we find that the slope is dependent on stellar mass, such that it is steeper at low masses ($\log\mathrmΨ\propto\log\mathrm{M_{\star}}$) than at high masses ($\log\mathrmΨ\propto(0.3-0.6)\log\mathrm{M_{\star}}$). These steeper low mass slopes are found for three different star formation indicators: the combination of the ultraviolet (UV) and infrared (IR), calibrated from a stacking analysis of Spitzer/MIPS 24$μ$m imaging; $β$-corrected UV SFRs; and H$α$ SFRs. The normalization of the sequence evolves differently in distinct mass regimes as well: for galaxies less massive than $\log(\mathrm{M_{\star}/M_{\odot}})<10$ the specific SFR ($Ψ/\mathrm{M_{\star}}$) is observed to be roughly self-similar with $Ψ/\mathrm{M_{\star}}\propto(1+z)^{1.9}$, whereas more massive galaxies show a stronger evolution with $Ψ/\mathrm{M_{\star}}\propto(1+z)^{2.2-3.5}$ for $\log(\mathrm{M_{\star}/M_{\odot}})=10.2-11.2$. The fact that we find a steep slope of the star formation sequence for the lower mass galaxies will help reconcile theoretical galaxy formation models with the observations. The results of this study support the analytical conclusions of Leja et al. (2014).
△ Less
Submitted 29 August, 2014; v1 submitted 7 July, 2014;
originally announced July 2014.
-
The Nature of Extreme Emission Line Galaxies at z=1-2: Kinematics and Metallicities from Near-Infrared Spectroscopy
Authors:
Michael V. Maseda,
Arjen van der Wel,
Hans-Walter Rix,
Elisabete da Cunha,
Camilla Pacifici,
Ivelina Momcheva,
Gabriel B. Brammer,
Sharon E. Meidt,
Marijn Franx,
Pieter van Dokkum,
Mattia Fumagalli,
Eric F. Bell,
Henry C. Ferguson,
Natascha M. Förster-Schreiber,
Anton M. Koekemoer,
David C. Koo,
Britt F. Lundgren,
Danilo Marchesini,
Erica J. Nelson,
Shannon G. Patel,
Rosalind E. Skelton,
Amber N. Straughn,
Jonathan R. Trump,
Katherine E. Whitaker
Abstract:
We present near-infrared spectroscopy of a sample of 22 Extreme Emission Line Galaxies at redshifts 1.3 < z < 2.3, confirming that these are low-mass (M* = 10^8 - 10^9 M_sun) galaxies undergoing intense starburst episodes (M*/SFR ~ 10-100 Myr). The sample is selected by [O III] or Hα emission line flux and equivalent width using near-infrared grism spectroscopy from the 3D-HST survey. High-resolut…
▽ More
We present near-infrared spectroscopy of a sample of 22 Extreme Emission Line Galaxies at redshifts 1.3 < z < 2.3, confirming that these are low-mass (M* = 10^8 - 10^9 M_sun) galaxies undergoing intense starburst episodes (M*/SFR ~ 10-100 Myr). The sample is selected by [O III] or Hα emission line flux and equivalent width using near-infrared grism spectroscopy from the 3D-HST survey. High-resolution NIR spectroscopy is obtained with LBT/LUCI and VLT/X-SHOOTER. The [O III]/Hβ line ratio is high (> 5) and [N II]/Hα is always significantly below unity, which suggests a low gas-phase metallicity. We are able to determine gas-phase metallicities for 7 of our objects using various strong-line methods, with values in the range 0.05-0.30 Z_sun and with a median of 0.15 Z_sun; for 3 of these objects we detect [O III]λ4363 which allows for a direct constraint on the metallicity. The velocity dispersion, as measured from the nebular emission lines, is typically ~50 km/s. Combined with the observed star-forming activity, the Jeans and Toomre stability criteria imply that the gas fraction must be large (> 2/3), consistent with the difference between our dynamical and stellar mass estimates. The implied gas depletion time scale (several hundred Myr) is substantially longer than the inferred mass-weighted ages (~50 Myr), which further supports the emerging picture that most stars in low-mass galaxies form in short, intense bursts of star formation.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Experimental investigation of the softening-stiffening response of tensegrity prisms under compressive loading
Authors:
Ada Amendola,
Fernando Fraternali,
Gerardo Carpentieri,
Mauricio de Oliveira,
Robert E. Skelton
Abstract:
The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy to implement, including a string-first approach in the case of ordinary tensegrity prisms, and a base-first approach in the case of systems equipped with rigid b…
▽ More
The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy to implement, including a string-first approach in the case of ordinary tensegrity prisms, and a base-first approach in the case of systems equipped with rigid bases. The experimental section shows that the compressive response of tensegrity prisms switches from stiffening to softening under large displacements, in dependence on the current values of suitable geometric and prestress variables. Future research lines regarding the mechanical modeling of tensegrity prisms and their use as building blocks of nonlinear periodic lattices and acoustic metamaterials are discussed.
△ Less
Submitted 21 June, 2014; v1 submitted 4 June, 2014;
originally announced June 2014.
-
Dense cores in galaxies out to z=2.5 in SDSS, UltraVISTA, and the five 3D-HST/CANDELS fields
Authors:
Pieter van Dokkum,
Rachel Bezanson,
Arjen van der Wel,
Erica June Nelson,
Ivelina Momcheva,
Rosalind E. Skelton,
Katherine E. Whitaker,
Gabriel Brammer,
Charlie Conroy,
Natascha M. Forster Schreiber,
Mattia Fumagalli,
Mariska Kriek,
Ivo Labbe,
Joel Leja,
Danilo Marchesini,
Adam Muzzin,
Pascal Oesch,
Stijn Wuyts
Abstract:
The dense interiors of massive galaxies are among the most intriguing environments in the Universe. In this paper we ask when these dense cores were formed and determine how galaxies gradually assembled around them. We select galaxies that have a stellar mass >3x10^10 Msun inside r=1 kpc out to z=2.5, using the 3D-HST survey and data at low redshift. Remarkably, the number density of galaxies with…
▽ More
The dense interiors of massive galaxies are among the most intriguing environments in the Universe. In this paper we ask when these dense cores were formed and determine how galaxies gradually assembled around them. We select galaxies that have a stellar mass >3x10^10 Msun inside r=1 kpc out to z=2.5, using the 3D-HST survey and data at low redshift. Remarkably, the number density of galaxies with dense cores appears to have decreased from z=2.5 to the present. This decrease is probably mostly due to stellar mass loss and the resulting adiabatic expansion, with some contribution from merging. We infer that dense cores were mostly formed at z>2.5, consistent with their largely quiescent stellar populations. While the cores appear to form early, the galaxies in which they reside show strong evolution: their total masses increase by a factor of 2-3 from z=2.5 to z=0 and their effective radii increase by a factor of 5-6. As a result, the contribution of dense cores to the total mass of the galaxies in which they reside decreases from ~50% at z=2.5 to ~15% at z=0. Because of their early formation, the contribution of dense cores to the total stellar mass budget of the Universe is a strong function of redshift. The stars in cores with M_1kpc>3x10^10 Msun make up ~0.1% of the stellar mass density of the Universe today but 10%-20% at z~2, depending on their IMF. The formation of these cores required the conversion of ~10^11 Msun of gas into stars within ~1 kpc, while preventing significant star formation at larger radii.
△ Less
Submitted 19 July, 2014; v1 submitted 18 April, 2014;
originally announced April 2014.
-
3D-HST+CANDELS: The Evolution of the Galaxy Size-Mass Distribution since $z=3$
Authors:
A. van der Wel,
M. Franx,
P. G. van Dokkum,
R. E. Skelton,
I. G. Momcheva,
K. E. Whitaker,
G. B. Brammer,
E. F. Bell,
H. -W. Rix,
S. Wuyts,
H. C. Ferguson,
B. P. Holden,
G. Barro,
A. M. Koekemoer,
Yu-Yen Chang,
E. J. McGrath,
B. Haussler,
A. Dekel,
P. Behroozi,
M. Fumagalli,
J. Leja,
B. F. Lundgren,
M. V. Maseda,
E. J. Nelson,
D. A. Wake
, et al. (5 additional authors not shown)
Abstract:
Spectroscopic + photometric redshifts, stellar mass estimates, and rest-frame colors from the 3D-HST survey are combined with structural parameter measurements from CANDELS imaging to determine the galaxy size-mass distribution over the redshift range 0<z<3. Separating early- and late-type galaxies on the basis of star-formation activity, we confirm that early-type galaxies are on average smaller…
▽ More
Spectroscopic + photometric redshifts, stellar mass estimates, and rest-frame colors from the 3D-HST survey are combined with structural parameter measurements from CANDELS imaging to determine the galaxy size-mass distribution over the redshift range 0<z<3. Separating early- and late-type galaxies on the basis of star-formation activity, we confirm that early-type galaxies are on average smaller than late-type galaxies at all redshifts, and find a significantly different rate of average size evolution at fixed galaxy mass, with fast evolution for the early-type population, R_eff ~ (1+z)^-1.48, and moderate evolution for the late-type population, R_eff ~ (1+z)^-0.75. The large sample size and dynamic range in both galaxy mass and redshift, in combination with the high fidelity of our measurements due to the extensive use of spectroscopic data, not only fortify previous results, but also enable us to probe beyond simple average galaxy size measurements. At all redshifts the slope of the size-mass relation is shallow, R_eff ~ M_star^0.22, for late-type galaxies with stellar mass >3x10^9 M_sol, and steep, R_eff M_star^0.75, for early-type galaxies with stellar mass >2x10^10 M_sol. The intrinsic scatter is <~0.2 dex for all galaxy types and redshifts. For late-type galaxies, the logarithmic size distribution is not symmetric, but skewed toward small sizes: at all redshifts and masses a tail of small late-type galaxies exists that overlaps in size with the early-type galaxy population. The number density of massive (~10^11 M_sol), compact (R_eff < 2 kpc) early-type galaxies increases from z=3 to z=1.5-2 and then strongly decreases at later cosmic times.
△ Less
Submitted 13 June, 2014; v1 submitted 10 April, 2014;
originally announced April 2014.
-
3D-HST WFC3-selected Photometric Catalogs in the Five CANDELS/3D-HST Fields: Photometry, Photometric Redshifts and Stellar Masses
Authors:
Rosalind E. Skelton,
Katherine E. Whitaker,
Ivelina G. Momcheva,
Gabriel B. Brammer,
Pieter G. van Dokkum,
Ivo Labbe,
Marijn Franx,
Arjen van der Wel,
Rachel Bezanson,
Elisabete Da Cunha,
Mattia Fumagalli,
Natascha Foerster Schreiber,
Mariska Kriek,
Joel Leja,
Britt F. Lundgren,
Daniel Magee,
Danilo Marchesini,
Michael V. Maseda,
Erica J. Nelson,
Pascal Oesch,
Camilla Pacifici,
Shannon G. Patel,
Sedona Price,
Hans-Walter Rix,
Tomer Tal
, et al. (2 additional authors not shown)
Abstract:
The 3D-HST and CANDELS programs have provided WFC3 and ACS spectroscopy and photometry over ~900 square arcminutes in five fields: AEGIS, COSMOS, GOODS-North, GOODS-South, and the UKIDSS UDS field. All these fields have a wealth of publicly available imaging datasets in addition to the HST data, which makes it possible to construct the spectral energy distributions (SEDs) of objects over a wide wa…
▽ More
The 3D-HST and CANDELS programs have provided WFC3 and ACS spectroscopy and photometry over ~900 square arcminutes in five fields: AEGIS, COSMOS, GOODS-North, GOODS-South, and the UKIDSS UDS field. All these fields have a wealth of publicly available imaging datasets in addition to the HST data, which makes it possible to construct the spectral energy distributions (SEDs) of objects over a wide wavelength range. In this paper we describe a photometric analysis of the CANDELS and 3D-HST HST imaging and the ancillary imaging data at wavelengths 0.3um to 8um. Objects were selected in the WFC3 near-IR bands, and their SEDs were determined by carefully taking the effects of the point spread function in each observation into account. A total of 147 distinct imaging datasets were used in the analysis. The photometry is made available in the form of six catalogs: one for each field, as well as a master catalog containing all objects in the entire survey. We also provide derived data products: photometric redshifts, determined with the EAZY code, and stellar population parameters determined with the FAST code. We make all the imaging data that were used in the analysis available, including our reductions of the WFC3 imaging in all five fields. 3D-HST is a spectroscopic survey with the WFC3 and ACS grisms, and the photometric catalogs presented here constitute a necessary first step in the analysis of these grism data. All the data presented in this paper are available through the 3D-HST website.
△ Less
Submitted 18 July, 2014; v1 submitted 14 March, 2014;
originally announced March 2014.
-
Bulge Growth and Quenching since z = 2.5 in CANDELS/3D-HST
Authors:
Philipp Lang,
Stijn Wuyts,
Rachel S. Somerville,
Natascha M. Forster Schreiber,
Reinhard Genzel,
Eric F. Bell,
Gabe Brammer,
Avishai Dekel,
Sandra M. Faber,
Henry C. Ferguson,
Norman A. Grogin,
Dale D. Kocevski,
Anton M. Koekemoer,
Dieter Lutz,
Elizabeth J. McGrath,
Ivelina Momcheva,
Erica J. Nelson,
Joel R. Primack,
David J. Rosario,
Rosalind E. Skelton,
Linda J. Tacconi,
Pieter G. van Dokkum,
Katherine E. Whitaker
Abstract:
Exploiting the deep high-resolution imaging of all 5 CANDELS fields, and accurate redshift information provided by 3D-HST, we investigate the relation between structure and stellar populations for a mass-selected sample of 6764 galaxies above 10^10 Msun, spanning the redshift range 0.5 < z < 2.5. For the first time, we fit 2-dimensional models comprising a single Sersic fit and two-component (i.e.…
▽ More
Exploiting the deep high-resolution imaging of all 5 CANDELS fields, and accurate redshift information provided by 3D-HST, we investigate the relation between structure and stellar populations for a mass-selected sample of 6764 galaxies above 10^10 Msun, spanning the redshift range 0.5 < z < 2.5. For the first time, we fit 2-dimensional models comprising a single Sersic fit and two-component (i.e., bulge + disk) decompositions not only to the H-band light distributions, but also to the stellar mass maps reconstructed from resolved stellar population modeling. We confirm that the increased bulge prominence among quiescent galaxies, as reported previously based on rest-optical observations, remains in place when considering the distributions of stellar mass. Moreover, we observe an increase of the typical Sersic index and bulge-to-total ratio (with median B/T reaching 40-50%) among star-forming galaxies above 10^11 Msun. Given that quenching for these most massive systems is likely to be imminent, our findings suggest that significant bulge growth precedes a departure from the star-forming main sequence. We demonstrate that the bulge mass (and ideally knowledge of the bulge and total mass) is a more reliable predictor of the star-forming versus quiescent state of a galaxy than the total stellar mass. The same trends are predicted by the state-of-the-art semi-analytic model by Somerville et al. In the latter, bulges and black holes grow hand in hand through merging and/or disk instabilities, and AGN-feedback shuts off star formation. Further observations will be required to pin down star formation quenching mechanisms, but our results imply they must be internal to the galaxies and closely associated with bulge growth.
△ Less
Submitted 17 April, 2014; v1 submitted 4 February, 2014;
originally announced February 2014.
-
Observations of environmental quenching in groups in the 11 Gyr since z=2.5: different quenching for central and satellite galaxies
Authors:
Tomer Tal,
Avishai Dekel,
Pascal Oesch,
Adam Muzzin,
Gabriel B. Brammer,
Pieter G. van Dokkum,
Marijn Franx,
Garth D. Illingworth,
Joel Leja,
Daniel Magee,
Danilo Marchesini,
Ivelina Momcheva,
Erica J. Nelson,
Shannon G. Patel,
Ryan F. Quadri,
Hans-Walter Rix,
Rosalind E. Skelton,
David A. Wake,
Katherine E. Whitaker
Abstract:
We present direct observational evidence for star formation quenching in galaxy groups in the redshift range 0<z<2.5. We utilize a large sample of nearly 6000 groups, selected by fixed cumulative number density from three photometric catalogs, to follow the evolving quiescent fractions of central and satellite galaxies over roughly 11 Gyr. At z~0, central galaxies in our sample range in stellar ma…
▽ More
We present direct observational evidence for star formation quenching in galaxy groups in the redshift range 0<z<2.5. We utilize a large sample of nearly 6000 groups, selected by fixed cumulative number density from three photometric catalogs, to follow the evolving quiescent fractions of central and satellite galaxies over roughly 11 Gyr. At z~0, central galaxies in our sample range in stellar mass from Milky Way/M31 analogs (M=6.5x10^10 M\solar) to nearby massive ellipticals (M=1.5x10^11 M\solar). Satellite galaxies in the same groups reach masses as low as twice that of the Large Magellanic Cloud (M=6.5x10^9 M\solar). Using statistical background subtraction, we measure the average rest-frame colors of galaxies in our groups and calculate the evolving quiescent fractions of centrals and satellites over seven redshift bins. Our analysis shows clear evidence for star formation quenching in group halos, with a different quenching onset for centrals and their satellite galaxies. Using halo mass estimates for our central galaxies, we find that star formation shuts off in centrals when typical halo masses reach between 10^12 and 10^13 M\solar, consistent with predictions from the halo quenching model. In contrast, satellite galaxies in the same groups most likely undergo quenching by environmental processes, whose onset is delayed with respect to their central galaxy. Although star formation is suppressed in all galaxies over time, the processes that govern quenching are different for centrals and satellites. While mass plays an important role in determining the star formation activity of central galaxies, quenching in satellite galaxies is dominated by the environment in which they reside.
△ Less
Submitted 13 January, 2014;
originally announced January 2014.
-
Exploring the chemical link between local ellipticals and their high-redshift progenitors
Authors:
Joel Leja,
Pieter G. van Dokkum,
Ivelina Momcheva,
Gabriel Brammer,
Rosalind E. Skelton,
Katherine E. Whitaker,
Brett H. Andrews,
Marijn Franx,
Mariska Kriek,
Arjen van der Wel,
Rachel Bezanson,
Charlie Conroy,
Natascha Forster Schreiber,
Erica Nelson,
Shannon G. Patel
Abstract:
We present Keck/MOSFIRE K-band spectroscopy of the first mass-selected sample of galaxies at $z\sim2.3$. Targets are selected from the 3D-HST Treasury survey. The six detected galaxies have a mean [NII]$λ$6584/H$α$ ratio of $0.27\pm0.01$, with a small standard deviation of 0.05. This mean value is similar to that of UV-selected galaxies of the same mass. The mean gas-phase oxygen abundance infer…
▽ More
We present Keck/MOSFIRE K-band spectroscopy of the first mass-selected sample of galaxies at $z\sim2.3$. Targets are selected from the 3D-HST Treasury survey. The six detected galaxies have a mean [NII]$λ$6584/H$α$ ratio of $0.27\pm0.01$, with a small standard deviation of 0.05. This mean value is similar to that of UV-selected galaxies of the same mass. The mean gas-phase oxygen abundance inferred from the [NII]/H$α$ ratios depends on the calibration method, and ranges from 12+log(O/H)$_{gas}=8.57$ for the {Pettini} & {Pagel} (2004) calibration to 12+log(O/H)$_{gas}= 8.87$ for the {Maiolino} {et~al.} (2008) calibration. Measurements of the stellar oxygen abundance in nearby quiescent galaxies with the same number density indicate 12+log(O/H)$_{stars}= 8.95$, similar to the gas-phase abundances of the $z\sim2.3$ galaxies if the {Maiolino} {et~al.} (2008) calibration is used. This suggests that these high-redshift star forming galaxies may be progenitors of today's massive early-type galaxies. The main uncertainties are the absolute calibration of the gas-phase oxygen abundance and the incompleteness of the $z\sim2.3$ sample: the galaxies with detected H$α$ tend to be larger and have higher star formation rates than the galaxies without detected H$α$, and we may still be missing the most dust-obscured progenitors.
△ Less
Submitted 25 October, 2013;
originally announced October 2013.
-
Confirmation of Small Dynamical and Stellar Masses for Extreme Emission Line Galaxies at z~2
Authors:
Michael V. Maseda,
Arjen van der Wel,
Elisabete da Cunha,
Hans-Walter Rix,
Camilla Pacifici,
Ivelina Momcheva,
Gabriel B. Brammer,
Marijn Franx,
Pieter van Dokkum,
Eric F. Bell,
Mattia Fumagalli,
Norman A. Grogin,
Dale D. Kocevski,
Anton M. Koekemoer,
Britt F. Lundgren,
Danilo Marchesini,
Erica J. Nelson,
Shannon G. Patel,
Rosalind E. Skelton,
Amber N. Straughn,
Jonathan R. Trump,
Benjamin J. Weiner,
Katherine E. Whitaker,
Stijn Wuyts
Abstract:
Spectroscopic observations from the Large Binocular Telescope and the Very Large Telescope reveal kinematically narrow lines (~50 km/s) for a sample of 14 Extreme Emission Line Galaxies (EELGs) at redshifts 1.4 < z < 2.3. These measurements imply that the total dynamical masses of these systems are low (< 3x10^9 M_sun). Their large [O III] 5007 equivalent widths (500-1100 Angstroms) and faint blue…
▽ More
Spectroscopic observations from the Large Binocular Telescope and the Very Large Telescope reveal kinematically narrow lines (~50 km/s) for a sample of 14 Extreme Emission Line Galaxies (EELGs) at redshifts 1.4 < z < 2.3. These measurements imply that the total dynamical masses of these systems are low (< 3x10^9 M_sun). Their large [O III] 5007 equivalent widths (500-1100 Angstroms) and faint blue continuum emission imply young ages of 10-100 Myr and stellar masses of 10^8-10^9 M_sun, confirming the presence of a violent starburst. The dynamical masses represent the first such determinations for low-mass galaxies at z > 1. The stellar mass formed in this vigorous starburst phase represents a large fraction of the total (dynamical) mass, without a significantly massive underlying population of older stars. The occurrence of such intense events in shallow potentials strongly suggests that supernova-driven winds must be of critical importance in the subsequent evolution of these systems.
△ Less
Submitted 23 October, 2013;
originally announced October 2013.
-
A CANDELS - 3D-HST Synergy: Resolved Star Formation Patterns at 0.7 < z < 1.5
Authors:
Stijn Wuyts,
Natascha M. Forster Schreiber,
Erica J. Nelson,
Pieter G. van Dokkum,
Gabe Brammer,
Yu-Yen Chang,
Sandra M. Faber,
Henry C. Ferguson,
Marijn Franx,
Mattia Fumagalli,
Reinhard Genzel,
Norman A. Grogin,
Dale D. Kocevski,
Anton M. Koekemoer,
Britt Lundgren,
Dieter Lutz,
Elizabeth J. McGrath,
Ivelina Momcheva,
David Rosario,
Rosalind E. Skelton,
Linda J. Tacconi,
Arjen van der Wel,
Katherine E. Whitaker
Abstract:
We analyze the resolved stellar populations of 473 massive star-forming galaxies at 0.7 < z < 1.5, with multi-wavelength broad-band imaging from CANDELS and Halpha surface brightness profiles at the same kiloparsec resolution from 3D-HST. Together, this unique data set sheds light on how the assembled stellar mass is distributed within galaxies, and where new stars are being formed. We find the Ha…
▽ More
We analyze the resolved stellar populations of 473 massive star-forming galaxies at 0.7 < z < 1.5, with multi-wavelength broad-band imaging from CANDELS and Halpha surface brightness profiles at the same kiloparsec resolution from 3D-HST. Together, this unique data set sheds light on how the assembled stellar mass is distributed within galaxies, and where new stars are being formed. We find the Halpha morphologies to resemble more closely those observed in the ACS I band than in the WFC3 H band, especially for the larger systems. We next derive a novel prescription for Halpha dust corrections, which accounts for extra extinction towards HII regions. The prescription leads to consistent SFR estimates and reproduces the observed relation between the Halpha/UV luminosity ratio and visual extinction, both on a pixel-by-pixel and on a galaxy-integrated level. We find the surface density of star formation to correlate with the surface density of assembled stellar mass for spatially resolved regions within galaxies, akin to the so-called 'main sequence of star formation' established on a galaxy-integrated level. Deviations from this relation towards lower equivalent widths are found in the inner regions of galaxies. Clumps and spiral features, on the other hand, are associated with enhanced Halpha equivalent widths, bluer colors, and higher specific star formation rates compared to the underlying disk. Their Halpha/UV luminosity ratio is lower than that of the underlying disk, suggesting the ACS clump selection preferentially picks up those regions of elevated star formation activity that are the least obscured by dust. Our analysis emphasizes that monochromatic studies of galaxy structure can be severely limited by mass-to-light ratio variations due to dust and spatially inhomogeneous star formation histories.
△ Less
Submitted 21 October, 2013;
originally announced October 2013.