-
Planar near-field measurements of specular and diffuse reflection of millimeter-wave absorbers
Authors:
Fumiya Miura,
Hayato Takakura,
Yutaro Sekimoto,
Junji Inatani,
Frederick Matsuda,
Shugo Oguri,
Shogo Nakamura
Abstract:
Mitigating the far sidelobes of a wide field-of-view telescope is one of the critical issues for polarization observation of the cosmic microwave background. Since even small reflections of stray light at the millimeter-wave absorbers inside the telescope may create nonnegligible far sidelobes, we have developed a method to measure the reflectance of millimeter-wave absorbers, including diffuse re…
▽ More
Mitigating the far sidelobes of a wide field-of-view telescope is one of the critical issues for polarization observation of the cosmic microwave background. Since even small reflections of stray light at the millimeter-wave absorbers inside the telescope may create nonnegligible far sidelobes, we have developed a method to measure the reflectance of millimeter-wave absorbers, including diffuse reflections. By applying the planar near-field measurement method to the absorbers, we have enabled two-dimensional diffuse-reflection measurements, in addition to characterizing specular reflection. We have measured the reflectance of five samples (TK RAM Large and Small Tiles and Eccosorb AN-72, HR-10, and LS-22) at two angles of incidence in the frequency range from 70 GHz to 110 GHz. Compared with conventional horn-to-horn measurements, we obtained a consistent specular reflectance with a higher precision, less affected by standing waves. We have demonstrated that the angular response and diffuse-to-specular reflectance ratio differ among various materials. The measurements also imply that some absorbers may affect the polarization direction when reflecting the incident waves.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
The LiteBIRD mission to explore cosmic inflation
Authors:
T. Ghigna,
A. Adler,
K. Aizawa,
H. Akamatsu,
R. Akizawa,
E. Allys,
A. Anand,
J. Aumont,
J. Austermann,
S. Azzoni,
C. Baccigalupi,
M. Ballardini,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
S. Basak,
A. Basyrov,
S. Beckman,
M. Bersanelli,
M. Bortolami,
F. Bouchet,
T. Brinckmann,
P. Campeti,
E. Carinos,
A. Carones
, et al. (134 additional authors not shown)
Abstract:
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-…
▽ More
LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Metropolitan Scale and Longitudinal Dataset of Anonymized Human Mobility Trajectories
Authors:
Takahiro Yabe,
Kota Tsubouchi,
Toru Shimizu,
Yoshihide Sekimoto,
Kaoru Sezaki,
Esteban Moro,
Alex Pentland
Abstract:
Modeling and predicting human mobility trajectories in urban areas is an essential task for various applications. The recent availability of large-scale human movement data collected from mobile devices have enabled the development of complex human mobility prediction models. However, human mobility prediction methods are often trained and tested on different datasets, due to the lack of open-sour…
▽ More
Modeling and predicting human mobility trajectories in urban areas is an essential task for various applications. The recent availability of large-scale human movement data collected from mobile devices have enabled the development of complex human mobility prediction models. However, human mobility prediction methods are often trained and tested on different datasets, due to the lack of open-source large-scale human mobility datasets amid privacy concerns, posing a challenge towards conducting fair performance comparisons between methods. To this end, we created an open-source, anonymized, metropolitan scale, and longitudinal (90 days) dataset of 100,000 individuals' human mobility trajectories, using mobile phone location data. The location pings are spatially and temporally discretized, and the metropolitan area is undisclosed to protect users' privacy. The 90-day period is composed of 75 days of business-as-usual and 15 days during an emergency. To promote the use of the dataset, we will host a human mobility prediction data challenge (`HuMob Challenge 2023') using the human mobility dataset, which will be held in conjunction with ACM SIGSPATIAL 2023.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations
Authors:
U. Fuskeland,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
H. K. Eriksen,
J. Errard,
R. T. Génova-Santos,
T. Hasebe,
J. Hubmayr,
H. Imada,
N. Krachmalnicoff,
L. Lamagna,
G. Pisano,
D. Poletti,
M. Remazeilles,
K. L. Thompson,
L. Vacher,
I. K. Wehus,
S. Azzoni,
M. Ballardini,
R. B. Barreiro,
N. Bartolo,
A. Basyrov,
D. Beck
, et al. (92 additional authors not shown)
Abstract:
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertaint…
▽ More
LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged)
△ Less
Submitted 15 August, 2023; v1 submitted 10 February, 2023;
originally announced February 2023.
-
Crowdsensing-based Road Damage Detection Challenge (CRDDC-2022)
Authors:
Deeksha Arya,
Hiroya Maeda,
Sanjay Kumar Ghosh,
Durga Toshniwal,
Hiroshi Omata,
Takehiro Kashiyama,
Yoshihide Sekimoto
Abstract:
This paper summarizes the Crowdsensing-based Road Damage Detection Challenge (CRDDC), a Big Data Cup organized as a part of the IEEE International Conference on Big Data'2022. The Big Data Cup challenges involve a released dataset and a well-defined problem with clear evaluation metrics. The challenges run on a data competition platform that maintains a real-time online evaluation system for the p…
▽ More
This paper summarizes the Crowdsensing-based Road Damage Detection Challenge (CRDDC), a Big Data Cup organized as a part of the IEEE International Conference on Big Data'2022. The Big Data Cup challenges involve a released dataset and a well-defined problem with clear evaluation metrics. The challenges run on a data competition platform that maintains a real-time online evaluation system for the participants. In the presented case, the data constitute 47,420 road images collected from India, Japan, the Czech Republic, Norway, the United States, and China to propose methods for automatically detecting road damages in these countries. More than 60 teams from 19 countries registered for this competition. The submitted solutions were evaluated using five leaderboards based on performance for unseen test images from the aforementioned six countries. This paper encapsulates the top 11 solutions proposed by these teams. The best-performing model utilizes ensemble learning based on YOLO and Faster-RCNN series models to yield an F1 score of 76% for test data combined from all 6 countries. The paper concludes with a comparison of current and past challenges and provides direction for the future.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Road Rutting Detection using Deep Learning on Images
Authors:
Poonam Kumari Saha,
Deeksha Arya,
Ashutosh Kumar,
Hiroya Maeda,
Yoshihide Sekimoto
Abstract:
Road rutting is a severe road distress that can cause premature failure of road incurring early and costly maintenance costs. Research on road damage detection using image processing techniques and deep learning are being actively conducted in the past few years. However, these researches are mostly focused on detection of cracks, potholes, and their variants. Very few research has been done on th…
▽ More
Road rutting is a severe road distress that can cause premature failure of road incurring early and costly maintenance costs. Research on road damage detection using image processing techniques and deep learning are being actively conducted in the past few years. However, these researches are mostly focused on detection of cracks, potholes, and their variants. Very few research has been done on the detection of road rutting. This paper proposes a novel road rutting dataset comprising of 949 images and provides both object level and pixel level annotations. Object detection models and semantic segmentation models were deployed to detect road rutting on the proposed dataset, and quantitative and qualitative analysis of model predictions were done to evaluate model performance and identify challenges faced in the detection of road rutting using the proposed method. Object detection model YOLOX-s achieves mAP@IoU=0.5 of 61.6% and semantic segmentation model PSPNet (Resnet-50) achieves IoU of 54.69 and accuracy of 72.67, thus providing a benchmark accuracy for similar work in future. The proposed road rutting dataset and the results of our research study will help accelerate the research on detection of road rutting using deep learning.
△ Less
Submitted 28 September, 2022;
originally announced September 2022.
-
RDD2022: A multi-national image dataset for automatic Road Damage Detection
Authors:
Deeksha Arya,
Hiroya Maeda,
Sanjay Kumar Ghosh,
Durga Toshniwal,
Yoshihide Sekimoto
Abstract:
The data article describes the Road Damage Dataset, RDD2022, which comprises 47,420 road images from six countries, Japan, India, the Czech Republic, Norway, the United States, and China. The images have been annotated with more than 55,000 instances of road damage. Four types of road damage, namely longitudinal cracks, transverse cracks, alligator cracks, and potholes, are captured in the dataset…
▽ More
The data article describes the Road Damage Dataset, RDD2022, which comprises 47,420 road images from six countries, Japan, India, the Czech Republic, Norway, the United States, and China. The images have been annotated with more than 55,000 instances of road damage. Four types of road damage, namely longitudinal cracks, transverse cracks, alligator cracks, and potholes, are captured in the dataset. The annotated dataset is envisioned for developing deep learning-based methods to detect and classify road damage automatically. The dataset has been released as a part of the Crowd sensing-based Road Damage Detection Challenge (CRDDC2022). The challenge CRDDC2022 invites researchers from across the globe to propose solutions for automatic road damage detection in multiple countries. The municipalities and road agencies may utilize the RDD2022 dataset, and the models trained using RDD2022 for low-cost automatic monitoring of road conditions. Further, computer vision and machine learning researchers may use the dataset to benchmark the performance of different algorithms for other image-based applications of the same type (classification, object detection, etc.).
△ Less
Submitted 18 September, 2022;
originally announced September 2022.
-
Pseudo-PFLOW: Development of nationwide synthetic open dataset for people movement based on limited travel survey and open statistical data
Authors:
Takehiro Kashiyama,
Yanbo Pang,
Yoshihide Sekimoto,
Takahiro Yabe
Abstract:
People flow data are utilized in diverse fields such as urban and commercial planning and disaster management. However, people flow data collected from mobile phones, such as using global positioning system and call detail records data, are difficult to obtain because of privacy issues. Even if the data were obtained, they would be difficult to handle. This study developed pseudo-people-flow data…
▽ More
People flow data are utilized in diverse fields such as urban and commercial planning and disaster management. However, people flow data collected from mobile phones, such as using global positioning system and call detail records data, are difficult to obtain because of privacy issues. Even if the data were obtained, they would be difficult to handle. This study developed pseudo-people-flow data covering all of Japan by combining public statistical and travel survey data from limited urban areas. This dataset is not a representation of actual travel movements but of typical weekday movements of people. Therefore it is expected to be useful for various purposes. Additionally, the dataset represents the seamless movement of people throughout Japan, with no restrictions on coverage, unlike the travel surveys. In this paper, we propose a method for generating pseudo-people-flow and describe the development of a "Pseudo-PFLOW" dataset covering the entire population of approximately 130 million people. We then evaluated the accuracy of the dataset using mobile phone and trip survey data from multiple metropolitan areas. The results showed that a coefficient of determination of more than 0.5 was confirmed for comparisons regarding population distribution and trip volume.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Development of current estimated household data and agent-based simulation of the future population distribution of households in Japan
Authors:
Kajiwara Kento,
Jue Ma,
Toshikazu Seto,
Yoshihide Sekimoto,
Yoshiki Ogawa,
Hiroshi Omata
Abstract:
In response to the declining population and aging infrastructure in Japan, local governments are implementing compact city policies such as the location normalization plan. To optimize the reorganization of urban public infrastructure, it is important to provide detailed and accurate forecasts of the distribution of urban populations and households. However, many local governments do not have the…
▽ More
In response to the declining population and aging infrastructure in Japan, local governments are implementing compact city policies such as the location normalization plan. To optimize the reorganization of urban public infrastructure, it is important to provide detailed and accurate forecasts of the distribution of urban populations and households. However, many local governments do not have the necessary data and forecasting capability. Moreover, current forecasts of gender- and age-based population data only exist at the municipal level, and household data are only available by family type at the prefecture level. Meanwhile, the accuracy is limited with an assumption of same change rate of population in all municipalities and within each city. Therefore, the aim of this study was to develop an agent-based microsimulation household transition model, with the household as the unit and agent, and household data was estimated for all cities in Japan from 2015. Estimated household data comprised the family type, house type, and address, age, and gender of household members, obtained from the national census, and building data. The resulting household transition model was used to forecast the attributes of each household every five years. Simulations in Toyama and Shizuoka Prefectures, Japan from 1980 to 2010 provided highly accurate estimates of municipal-level population by age and household volume by family type. The proposed model was also applied to predict the future distribution of disappearing villages and vacant houses in Japan.
△ Less
Submitted 1 April, 2022;
originally announced April 2022.
-
Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey
Authors:
LiteBIRD Collaboration,
E. Allys,
K. Arnold,
J. Aumont,
R. Aurlien,
S. Azzoni,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
N. Bartolo,
L. Bautista,
D. Beck,
S. Beckman,
M. Bersanelli,
F. Boulanger,
M. Brilenkov,
M. Bucher,
E. Calabrese,
P. Campeti,
A. Carones,
F. J. Casas,
A. Catalano,
V. Chan,
K. Cheung
, et al. (166 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects.
△ Less
Submitted 27 March, 2023; v1 submitted 6 February, 2022;
originally announced February 2022.
-
Polarization angle requirements for CMB B-mode experiments. Application to the LiteBIRD satellite
Authors:
P. Vielva,
E. Martínez-González,
F. J. Casas,
T. Matsumura,
S. Henrot-Versillé,
E. Komatsu,
J. Aumont,
R. Aurlien,
C. Baccigalupi,
A. J. Banday,
R. B. Barreiro,
N. Bartolo,
E. Calabrese,
K. Cheung,
F. Columbro,
A. Coppolecchia,
P. de Bernardis,
T. de Haan,
E. de la Hoz,
M. De Petris,
S. Della Torre,
P. Diego-Palazuelos,
H. K. Eriksen,
J. Errard,
F. Finelli
, et al. (46 additional authors not shown)
Abstract:
A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polar…
▽ More
A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polarization signal. In addition, assuming that the uncertainties on the polarization angle are in the small angle limit (lower than a few degrees), it is possible to derive analytic expressions to establish the requirements. The methodology also accounts for possible correlations among detectors, that may originate from the optics, wafers, etc. The approach is applied to the LiteBIRD space mission. We show that, for the most restrictive case (i.e., full correlation of the polarization angle systematics among detector sets), the requirements on the polarization angle uncertainties are of around 1 arcmin at the most sensitive frequency bands (i.e., $\approx 150$ GHz) and of few tens of arcmin at the lowest (i.e., $\approx 40$ GHz) and highest (i.e., $\approx 400$ GHz) observational bands. Conversely, for the least restrictive case (i.e., no correlation of the polarization angle systematics among detector sets), the requirements are $\approx 5$ times less restrictive than for the previous scenario. At the global and the telescope levels, polarization angle knowledge of a few arcmins is sufficient for correlated global systematic errors and can be relaxed by a factor of two for fully uncorrelated errors in detector polarization angle. The reported uncertainty levels are needed in order to have the bias on $r$ due to systematics below the limit established by the LiteBIRD collaboration.
△ Less
Submitted 18 April, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission
Authors:
L. Montier,
B. Mot,
P. de Bernardis,
B. Maffei,
G. Pisano,
F. Columbro,
J. E. Gudmundsson,
S. Henrot-Versillé,
L. Lamagna,
J. Montgomery,
T. Prouvé,
M. Russell,
G. Savini,
S. Stever,
K. L. Thompson,
M. Tsujimoto,
C. Tucker,
B. Westbrook,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular…
▽ More
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization
Authors:
M. Hazumi,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banjeri,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (213 additional authors not shown)
Abstract:
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou…
▽ More
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD
Authors:
Y. Sekimoto,
P. A. R. Ade,
A. Adler,
E. Allys,
K. Arnold,
D. Auguste,
J. Aumont,
R. Aurlien,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
D. Beck,
S. Beckman,
J. Bermejo,
P. de Bernardis,
M. Bersanelli,
J. Bonis,
J. Borrill,
F. Boulanger,
S. Bounissou,
M. Brilenkov
, et al. (212 additional authors not shown)
Abstract:
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li…
▽ More
LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
Global Road Damage Detection: State-of-the-art Solutions
Authors:
Deeksha Arya,
Hiroya Maeda,
Sanjay Kumar Ghosh,
Durga Toshniwal,
Hiroshi Omata,
Takehiro Kashiyama,
Yoshihide Sekimoto
Abstract:
This paper summarizes the Global Road Damage Detection Challenge (GRDDC), a Big Data Cup organized as a part of the IEEE International Conference on Big Data'2020. The Big Data Cup challenges involve a released dataset and a well-defined problem with clear evaluation metrics. The challenges run on a data competition platform that maintains a leaderboard for the participants. In the presented case,…
▽ More
This paper summarizes the Global Road Damage Detection Challenge (GRDDC), a Big Data Cup organized as a part of the IEEE International Conference on Big Data'2020. The Big Data Cup challenges involve a released dataset and a well-defined problem with clear evaluation metrics. The challenges run on a data competition platform that maintains a leaderboard for the participants. In the presented case, the data constitute 26336 road images collected from India, Japan, and the Czech Republic to propose methods for automatically detecting road damages in these countries. In total, 121 teams from several countries registered for this competition. The submitted solutions were evaluated using two datasets test1 and test2, comprising 2,631 and 2,664 images. This paper encapsulates the top 12 solutions proposed by these teams. The best performing model utilizes YOLO-based ensemble learning to yield an F1 score of 0.67 on test1 and 0.66 on test2. The paper concludes with a review of the facets that worked well for the presented challenge and those that could be improved in future challenges.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
GroundBIRD : A CMB polarization experiment with MKID arrays
Authors:
Kyungmin Lee,
Jihoon Choi,
Ricardo Tanausú Génova-Santos,
Makoto Hattori,
Masashi Hazumi,
Shunsuke Honda,
Takuji Ikemitsu,
Hidesato Ishida,
Hikaru Ishitsuka,
Yonggil Jo,
Kenichi Karatsu,
Kenji Kiuchi,
Junta Komine,
Ryo Koyano,
Hiroki Kutsuma,
Satoru Mima,
Makoto Minowa,
Joonhyeok Moon,
Makoto Nagai,
Taketo Nagasaki,
Masato Naruse,
Shugo Oguri,
Chiko Otani,
Michael Peel,
Rafael Rebolo
, et al. (9 additional authors not shown)
Abstract:
GroundBIRD is a ground-based experiment for the precise observation of the polarization of the cosmic microwave background (CMB). To achieve high sensitivity at large angular scale, we adopt three features in this experiment: fast rotation scanning, microwave kinetic inductance detector (MKID) and cold optics. The rotation scanning strategy has the advantage to suppress $1/f$ noise. It also provid…
▽ More
GroundBIRD is a ground-based experiment for the precise observation of the polarization of the cosmic microwave background (CMB). To achieve high sensitivity at large angular scale, we adopt three features in this experiment: fast rotation scanning, microwave kinetic inductance detector (MKID) and cold optics. The rotation scanning strategy has the advantage to suppress $1/f$ noise. It also provides a large sky coverage of 40\%, which corresponds to the large angular scales of $l \sim 6$. This allows us to constrain the tensor-to-scalar ratio by using low $l$ B-mode spectrum. The focal plane consists of 7 MKID arrays for two target frequencies, 145 GHz and 220 GHz band. There are 161 pixels in total, of which 138 are for 144 GHz and 23 are for 220 GHz. This array is currently under development and the prototype will soon be evaluated in telescope. The GroundBIRD telescope will observe the CMB at the Teide observatory. The telescope was moved from Japan to Tenerife and is now under test. We present the status and plan of the GroundBIRD experiment.
△ Less
Submitted 15 November, 2020;
originally announced November 2020.
-
Transfer Learning-based Road Damage Detection for Multiple Countries
Authors:
Deeksha Arya,
Hiroya Maeda,
Sanjay Kumar Ghosh,
Durga Toshniwal,
Alexander Mraz,
Takehiro Kashiyama,
Yoshihide Sekimoto
Abstract:
Many municipalities and road authorities seek to implement automated evaluation of road damage. However, they often lack technology, know-how, and funds to afford state-of-the-art equipment for data collection and analysis of road damages. Although some countries, like Japan, have developed less expensive and readily available Smartphone-based methods for automatic road condition monitoring, other…
▽ More
Many municipalities and road authorities seek to implement automated evaluation of road damage. However, they often lack technology, know-how, and funds to afford state-of-the-art equipment for data collection and analysis of road damages. Although some countries, like Japan, have developed less expensive and readily available Smartphone-based methods for automatic road condition monitoring, other countries still struggle to find efficient solutions. This work makes the following contributions in this context. Firstly, it assesses the usability of the Japanese model for other countries. Secondly, it proposes a large-scale heterogeneous road damage dataset comprising 26620 images collected from multiple countries using smartphones. Thirdly, we propose generalized models capable of detecting and classifying road damages in more than one country. Lastly, we provide recommendations for readers, local agencies, and municipalities of other countries when one other country publishes its data and model for automatic road damage detection and classification. Our dataset is available at (https://github.com/sekilab/RoadDamageDetector/).
△ Less
Submitted 30 August, 2020;
originally announced August 2020.
-
Non-Compulsory Measures Sufficiently Reduced Human Mobility in Tokyo during the COVID-19 Epidemic
Authors:
Takahiro Yabe,
Kota Tsubouchi,
Naoya Fujiwara,
Takayuki Wada,
Yoshihide Sekimoto,
Satish V. Ukkusuri
Abstract:
While large scale mobility data has become a popular tool to monitor the mobility patterns during the COVID-19 pandemic, the impacts of non-compulsory measures in Tokyo, Japan on human mobility patterns has been under-studied. Here, we analyze the temporal changes in human mobility behavior, social contact rates, and their correlations with the transmissibility of COVID-19, using mobility data col…
▽ More
While large scale mobility data has become a popular tool to monitor the mobility patterns during the COVID-19 pandemic, the impacts of non-compulsory measures in Tokyo, Japan on human mobility patterns has been under-studied. Here, we analyze the temporal changes in human mobility behavior, social contact rates, and their correlations with the transmissibility of COVID-19, using mobility data collected from more than 200K anonymized mobile phone users in Tokyo. The analysis concludes that by April 15th (1 week into state of emergency), human mobility behavior decreased by around 50%, resulting in a 70% reduction of social contacts in Tokyo, showing the effectiveness of non-compulsory measures. Furthermore, the reduction in data-driven human mobility metrics showed correlation with the decrease in estimated effective reproduction number of COVID-19 in Tokyo. Such empirical insights could inform policy makers on deciding sufficient levels of mobility reduction to contain the disease.
△ Less
Submitted 26 June, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Updated design of the CMB polarization experiment satellite LiteBIRD
Authors:
H. Sugai,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
J. Austermann,
C. Baccigalupi,
A. J. Banday,
R. Banerji,
R. B. Barreiro,
S. Basak,
J. Beall,
S. Beckman,
M. Bersanelli,
J. Borrill,
F. Boulanger,
M. L. Brown,
M. Bucher,
A. Buzzelli,
E. Calabrese,
F. J. Casas,
A. Challinor,
V. Chan,
Y. Chinone
, et al. (196 additional authors not shown)
Abstract:
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac…
▽ More
Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
City2City: Translating Place Representations across Cities
Authors:
Takahiro Yabe,
Kota Tsubouchi,
Toru Shimizu,
Yoshihide Sekimoto,
Satish V. Ukkusuri
Abstract:
Large mobility datasets collected from various sources have allowed us to observe, analyze, predict and solve a wide range of important urban challenges. In particular, studies have generated place representations (or embeddings) from mobility patterns in a similar manner to word embeddings to better understand the functionality of different places within a city. However, studies have been limited…
▽ More
Large mobility datasets collected from various sources have allowed us to observe, analyze, predict and solve a wide range of important urban challenges. In particular, studies have generated place representations (or embeddings) from mobility patterns in a similar manner to word embeddings to better understand the functionality of different places within a city. However, studies have been limited to generating such representations of cities in an individual manner and has lacked an inter-city perspective, which has made it difficult to transfer the insights gained from the place representations across different cities. In this study, we attempt to bridge this research gap by treating \textit{cities} and \textit{languages} analogously. We apply methods developed for unsupervised machine language translation tasks to translate place representations across different cities. Real world mobility data collected from mobile phone users in 2 cities in Japan are used to test our place representation translation methods. Translated place representations are validated using landuse data, and results show that our methods were able to accurately translate place representations from one city to another.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Congestion Analysis of Convolutional Neural Network-Based Pedestrian Counting Methods on Helicopter Footage
Authors:
Gergely Csönde,
Yoshihide Sekimoto,
Takehiro Kashiyama
Abstract:
Over the past few years, researchers have presented many different applications for convolutional neural networks, including those for the detection and recognition of objects from images. The desire to understand our own nature has always been an important motivation for research. Thus, the visual recognition of humans is among the most important issues facing machine learning today. Most solutio…
▽ More
Over the past few years, researchers have presented many different applications for convolutional neural networks, including those for the detection and recognition of objects from images. The desire to understand our own nature has always been an important motivation for research. Thus, the visual recognition of humans is among the most important issues facing machine learning today. Most solutions for this task have been developed and tested by using several publicly available datasets. These datasets typically contain images taken from street-level closed-circuit television cameras offering a low-angle view. There are major differences between such images and those taken from the sky. In addition, aerial images are often very congested, containing hundreds of targets. These factors may have significant impact on the quality of the results. In this paper, we investigate state-of-the-art methods for counting pedestrians and the related performance of aerial footage. Furthermore, we analyze this performance with respect to the congestion levels of the images.
△ Less
Submitted 5 November, 2019;
originally announced November 2019.
-
Predicting Evacuation Decisions using Representations of Individuals' Pre-Disaster Web Search Behavior
Authors:
Takahiro Yabe,
Kota Tsubouchi,
Toru Shimizu,
Yoshihide Sekimoto,
Satish V. Ukkusuri
Abstract:
Predicting the evacuation decisions of individuals before the disaster strikes is crucial for planning first response strategies. In addition to the studies on post-disaster analysis of evacuation behavior, there are various works that attempt to predict the evacuation decisions beforehand. Most of these predictive methods, however, require real time location data for calibration, which are becomi…
▽ More
Predicting the evacuation decisions of individuals before the disaster strikes is crucial for planning first response strategies. In addition to the studies on post-disaster analysis of evacuation behavior, there are various works that attempt to predict the evacuation decisions beforehand. Most of these predictive methods, however, require real time location data for calibration, which are becoming much harder to obtain due to the rising privacy concerns. Meanwhile, web search queries of anonymous users have been collected by web companies. Although such data raise less privacy concerns, they have been under-utilized for various applications. In this study, we investigate whether web search data observed prior to the disaster can be used to predict the evacuation decisions. More specifically, we utilize a "session-based query encoder" that learns the representations of each user's web search behavior prior to evacuation. Our proposed approach is empirically tested using web search data collected from users affected by a major flood in Japan. Results are validated using location data collected from mobile phones of the same set of users as ground truth. We show that evacuation decisions can be accurately predicted (84%) using only the users' pre-disaster web search data as input. This study proposes an alternative method for evacuation prediction that does not require highly sensitive location data, which can assist local governments to prepare effective first response strategies.
△ Less
Submitted 18 June, 2019;
originally announced June 2019.
-
Universality of population recovery patterns after disasters
Authors:
Takahiro Yabe,
Kota Tsubouchi,
Naoya Fujiwara,
Yoshihide Sekimoto,
Satish V. Ukkusuri
Abstract:
Despite the rising importance of enhancing community resilience to disasters, our understanding on how communities recover from catastrophic events is limited. Here we study the population recovery dynamics of disaster affected regions by observing the movements of over 2.5 million mobile phone users across three countries before, during and after five major disasters. We find that, although the r…
▽ More
Despite the rising importance of enhancing community resilience to disasters, our understanding on how communities recover from catastrophic events is limited. Here we study the population recovery dynamics of disaster affected regions by observing the movements of over 2.5 million mobile phone users across three countries before, during and after five major disasters. We find that, although the regions affected by the five disasters have significant differences in socio-economic characteristics, we observe a universal recovery pattern where displaced populations return in an exponential manner after all disasters. Moreover, the heterogeneity in initial and long-term displacement rates across communities across the three countries were explained by a set of key universal factors including the community's median income level, population size, housing damage rate, and the connectedness to other cities. These universal properties of recovery dynamics extracted from large scale evidence could impact efforts on urban resilience and sustainability across various disciplines.
△ Less
Submitted 5 May, 2019;
originally announced May 2019.
-
Cross-comparative analysis of evacuation behavior after earthquakes using mobile phone data
Authors:
Takahiro Yabe,
Yoshihide Sekimoto,
Kota Tsubouchi,
Satoshi Ikemoto
Abstract:
Despite the importance of predicting evacuation mobility dynamics after large scale disasters for effective first response and disaster relief, our general understanding of evacuation behavior remains limited because of the lack of empirical evidence on the evacuation movement of individuals across multiple disaster instances. Here we investigate the GPS trajectories of a total of more than 1 mill…
▽ More
Despite the importance of predicting evacuation mobility dynamics after large scale disasters for effective first response and disaster relief, our general understanding of evacuation behavior remains limited because of the lack of empirical evidence on the evacuation movement of individuals across multiple disaster instances. Here we investigate the GPS trajectories of a total of more than 1 million anonymized mobile phone users whose positions are tracked for a period of 2 months before and after four of the major earthquakes that occurred in Japan. Through a cross comparative analysis between the four disaster instances, we find that in contrast with the assumed complexity of evacuation decision making mechanisms in crisis situations, the individuals' evacuation probability is strongly dependent on the seismic intensity that they experience. In fact, we show that the evacuation probabilities in all earthquakes collapse into a similar pattern, with a critical threshold at around seismic intensity 5.5. This indicates that despite the diversity in the earthquakes profiles and urban characteristics, evacuation behavior is similarly dependent on seismic intensity. Moreover, we found that probability density functions of the distances that individuals evacuate are not dependent on seismic intensities that individuals experience. These insights from empirical analysis on evacuation from multiple earthquake instances using large scale mobility data contributes to a deeper understanding of how people react to earthquakes, and can potentially assist decision makers to simulate and predict the number of evacuees in urban areas with little computational time and cost, by using population density information and seismic intensity which can be observed instantaneously after the shock.
△ Less
Submitted 8 November, 2018;
originally announced November 2018.
-
Road Damage Detection Using Deep Neural Networks with Images Captured Through a Smartphone
Authors:
Hiroya Maeda,
Yoshihide Sekimoto,
Toshikazu Seto,
Takehiro Kashiyama,
Hiroshi Omata
Abstract:
Research on damage detection of road surfaces using image processing techniques has been actively conducted, achieving considerably high detection accuracies. Many studies only focus on the detection of the presence or absence of damage. However, in a real-world scenario, when the road managers from a governing body need to repair such damage, they need to clearly understand the type of damage in…
▽ More
Research on damage detection of road surfaces using image processing techniques has been actively conducted, achieving considerably high detection accuracies. Many studies only focus on the detection of the presence or absence of damage. However, in a real-world scenario, when the road managers from a governing body need to repair such damage, they need to clearly understand the type of damage in order to take effective action. In addition, in many of these previous studies, the researchers acquire their own data using different methods. Hence, there is no uniform road damage dataset available openly, leading to the absence of a benchmark for road damage detection. This study makes three contributions to address these issues. First, to the best of our knowledge, for the first time, a large-scale road damage dataset is prepared. This dataset is composed of 9,053 road damage images captured with a smartphone installed on a car, with 15,435 instances of road surface damage included in these road images. In order to generate this dataset, we cooperated with 7 municipalities in Japan and acquired road images for more than 40 hours. These images were captured in a wide variety of weather and illuminance conditions. In each image, we annotated the bounding box representing the location and type of damage. Next, we used a state-of-the-art object detection method using convolutional neural networks to train the damage detection model with our dataset, and compared the accuracy and runtime speed on both, using a GPU server and a smartphone. Finally, we demonstrate that the type of damage can be classified into eight types with high accuracy by applying the proposed object detection method. The road damage dataset, our experimental results, and the developed smartphone application used in this study are publicly available (https://github.com/sekilab/RoadDamageDetector/).
△ Less
Submitted 1 February, 2018; v1 submitted 29 January, 2018;
originally announced January 2018.
-
The LiteBIRD Satellite Mission - Sub-Kelvin Instrument
Authors:
A. Suzuki,
P. A. R. Ade,
Y. Akiba,
D. Alonso,
K. Arnold,
J. Aumont,
C. Baccigalupi,
D. Barron,
S. Basak,
S. Beckman,
J. Borrill,
F. Boulanger,
M. Bucher,
E. Calabrese,
Y. Chinone,
H-M. Cho,
A. Cukierman,
D. W. Curtis,
T. de Haan,
M. Dobbs,
A. Dominjon,
T. Dotani,
L. Duband,
A. Ducout,
J. Dunkley
, et al. (127 additional authors not shown)
Abstract:
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (d…
▽ More
Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies.
LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds.
The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier.
We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.
△ Less
Submitted 15 March, 2018; v1 submitted 22 January, 2018;
originally announced January 2018.
-
A wide field-of-view crossed Dragone optical system using the anamorphic aspherical surfaces
Authors:
Shingo Kashima,
Masashi Hazumi,
Hiroaki Imada,
Nobuhiko Katayama,
Tomotake Matsumura,
Yutaro Sekimoto,
Hajime Sugai
Abstract:
A side-fed crossed Dragone telescope provides a wide field-of-view. This type of a telescope is commonly employed in the measurement of cosmic microwave background (CMB) polarization, which requires an image-space telecentric telescope with a large focal plane over broadband coverage. We report the design of the wide field-of-view crossed Dragone optical system using the anamorphic aspherical surf…
▽ More
A side-fed crossed Dragone telescope provides a wide field-of-view. This type of a telescope is commonly employed in the measurement of cosmic microwave background (CMB) polarization, which requires an image-space telecentric telescope with a large focal plane over broadband coverage. We report the design of the wide field-of-view crossed Dragone optical system using the anamorphic aspherical surfaces with correction terms up to the 10th order. We achieved the Strehl ratio larger than 0.95 over 32 by 18 square degrees at 150 GHz. This design is an image-space telecentric and fully diffraction-limited system below 400 GHz. We discuss the optical performance in the uniformity of the axially symmetric point spread function and telecentricity over the field-of-view. We also address the analysis to evaluate the polarization properties, including the instrumental polarization, extinction rate, and polarization angle rotation. This work is a part of programs to design a compact multi-color wide field-of-view telescope for LiteBIRD, which is a next generation CMB polarization satellite.
△ Less
Submitted 5 June, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Analysis of characteristics of Al MKID resonators
Authors:
Takashi Noguchi,
Agnes Dominjon,
Yutaro Sekimoto
Abstract:
We have prepared two kinds of Al resonators using thin films made by evaporation or sputtering and studied temperature behavior of their quality factors and resonance frequencies with the help of the extended Mattis-Bardeen (M-B) equations and its approximated analytical expressions. We have found that temperature behavior of both the internal quality factor and resonance frequency shift measured…
▽ More
We have prepared two kinds of Al resonators using thin films made by evaporation or sputtering and studied temperature behavior of their quality factors and resonance frequencies with the help of the extended Mattis-Bardeen (M-B) equations and its approximated analytical expressions. We have found that temperature behavior of both the internal quality factor and resonance frequency shift measured in evaporated Al thin-film resonators are well agreed with those calculated by the analytical expressions of the complex conductivity given by the M-B theory. In the Al thin film resonators made by sputtering, the internal quality factor and resonance frequency shift show a peak and a bump near 0.17 K in the respective temperature dependence. It is found that inverse of the internal quality factor is well approximated by a-b*log(T) below 0.15 K, where T is the temperature. This type of temperature dependence strongly indicates the existence of the magnetic impurity scattering of residual quasiparticles due to the Kondo effect. It is shown that temperature dependence of the internal quality factor and resonance frequency shift observed in the sputtered Al resonators can be well fitted by the theory taking the Kondo effect and kinetic inductance of the residual quasiparticles into account.
△ Less
Submitted 29 September, 2017;
originally announced September 2017.
-
Mission design of LiteBIRD
Authors:
T. Matsumura,
Y. Akiba,
J. Borrill,
Y. Chinone,
M. Dobbs,
H. Fuke,
A. Ghribi,
M. Hasegawa,
K. Hattori,
M. Hattori,
M. Hazumi,
W. Holzapfel,
Y. Inoue,
K. Ishidoshiro,
H. Ishino,
H. Ishitsuka,
K. Karatsu,
N. Katayama,
I. Kawano,
A. Kibayashi,
Y. Kibe,
K. Kimura,
N. Kimura,
K. Koga,
M. Kozu
, et al. (44 additional authors not shown)
Abstract:
LiteBIRD is a next-generation satellite mission to measure the polarization of the cosmic microwave background (CMB) radiation. On large angular scales the B-mode polarization of the CMB carries the imprint of primordial gravitational waves, and its precise measurement would provide a powerful probe of the epoch of inflation. The goal of LiteBIRD is to achieve a measurement of the characterizing t…
▽ More
LiteBIRD is a next-generation satellite mission to measure the polarization of the cosmic microwave background (CMB) radiation. On large angular scales the B-mode polarization of the CMB carries the imprint of primordial gravitational waves, and its precise measurement would provide a powerful probe of the epoch of inflation. The goal of LiteBIRD is to achieve a measurement of the characterizing tensor to scalar ratio $r$ to an uncertainty of $δr=0.001$. In order to achieve this goal we will employ a kilo-pixel superconducting detector array on a cryogenically cooled sub-Kelvin focal plane with an optical system at a temperature of 4~K. We are currently considering two detector array options; transition edge sensor (TES) bolometers and microwave kinetic inductance detectors (MKID). In this paper we give an overview of LiteBIRD and describe a TES-based polarimeter designed to achieve the target sensitivity of 2~$μ$K$\cdot$arcmin over the frequency range 50 to 320~GHz.
△ Less
Submitted 12 November, 2013;
originally announced November 2013.
-
N2H+ and HC3N Observations of the Orion A Cloud
Authors:
K. Tatematsu,
R. Kandori,
T. Umemoto,
Y. Sekimoto
Abstract:
The ``integral-shaped filament'' of the Orion A giant molecular cloud was mapped in N2H+, and its northern end, the OMC-2/3 region was observed also in HC3N and CCS. The N2H+ distribution is similar to the dust continuum distribution, except for the central part of the Orion Nebula. The distribution of H13CO+ holds resemblance to that of dust continuum, but the N2H+ distribution looks more simil…
▽ More
The ``integral-shaped filament'' of the Orion A giant molecular cloud was mapped in N2H+, and its northern end, the OMC-2/3 region was observed also in HC3N and CCS. The N2H+ distribution is similar to the dust continuum distribution, except for the central part of the Orion Nebula. The distribution of H13CO+ holds resemblance to that of dust continuum, but the N2H+ distribution looks more similar to dust continuum distribution. The N-bearing molecules, N2H+ and NH3 seem to be more intense in OMC-2, compared with the H13CO+ and CS distribution. We identified 34 cloud cores from N2H+ data. Over the Orion Nebula region, the N2H+ linewidth is large (1.1-2.1 km/s). In the OMC-2/3 region, it becomes moderate (0.5-1.3 km/s), and it is smaller (0.3-1.1 km/s) in the south of the Orion Nebula. On the other hand, the gas kinetic temperature of the quiescent cores observed in N2H+ is rather constant (~ 20 K) over the $\int$-shaped filament. We detected no CCS emission in the OMC-2/3 region. In general, N2H+ and HC3N distribution is quite similar in the OMC-2/3 region, but we observed displacement between N2H+ and HC3N over 2' scale in OMC-3, which has a chain of Class 0-I protostars (candidates).
△ Less
Submitted 1 April, 2008;
originally announced April 2008.
-
Discovery of Diffuse X-ray Emission in One of the Nearest Massive Star-Forming Regions NGC 2024
Authors:
Yuichiro Ezoe,
Motohide Kokubun,
Kazuo Makishima,
Yutaro Sekimoto,
Keiichi Matsuzaki
Abstract:
A deep 75 ks {\it Chandra} ACIS--I data of NGC 2024 was analyzed, aiming at a search for diffuse X-ray emission in this one of the most nearby (415 pc) massive star-forming regions. After removing point sources, an extended emission was detected in the central circular region with a radius of 0.5 pc. It is spatially associated with the young massive stellar cluster. Its X-ray spectrum exhibits a…
▽ More
A deep 75 ks {\it Chandra} ACIS--I data of NGC 2024 was analyzed, aiming at a search for diffuse X-ray emission in this one of the most nearby (415 pc) massive star-forming regions. After removing point sources, an extended emission was detected in the central circular region with a radius of 0.5 pc. It is spatially associated with the young massive stellar cluster. Its X-ray spectrum exhibits a very hard continuum ($kT>8$ keV) and a sign of He-like Fe K$_α$ line with the 0.5--7 keV absorption corrected luminosity of 2$\times10^{31}$ \ergs. Undetected faint point sources, estimated from the luminosity function of the detected sources, contribute less than 10% to this emission. Hence the emission is truly diffuse in nature. Because of the proximity of NGC 2024 and the long exposure, this discovery is one of the most strong supports for the existence of the diffuse X-ray emission in massive star-forming regions.
△ Less
Submitted 8 August, 2006;
originally announced August 2006.
-
Investigation of Diffuse Hard X-ray Emission from the Massive Star-Forming Region NGC 6334
Authors:
Yuichiro Ezoe,
Motohide Kokubun,
Kazuo Makishima,
Yutaro Sekimoto,
Keiichi Matsuzaki
Abstract:
Chandra ACIS-I data of the molecular cloud and HII region complex NGC 6334 were analyzed. The hard X-ray clumps detected with ASCA (Sekimoto et al. 2000) were resolved into 792 point sources. After removing the point sources, an extended X-ray emission component was detected over a 5x9 pc2 region, with the 0.5-8 keV absorption-corrected luminosity of 2x10^33 erg/s. The contribution from faint po…
▽ More
Chandra ACIS-I data of the molecular cloud and HII region complex NGC 6334 were analyzed. The hard X-ray clumps detected with ASCA (Sekimoto et al. 2000) were resolved into 792 point sources. After removing the point sources, an extended X-ray emission component was detected over a 5x9 pc2 region, with the 0.5-8 keV absorption-corrected luminosity of 2x10^33 erg/s. The contribution from faint point sources to this extended emission was estimated as at most ~20 %, suggesting that most of the emission is diffuse in nature. The X-ray spectrum of the diffuse emission was observed to vary from place to place. In tenuous molecular cloud regions with hydrogen column density of 0.5~1x10^22 cm-2, the spectrum can be represented by a thermal plasma model with temperatures of several keV. The spectrum in dense cloud cores exhibits harder continuum, together with higher absorption more than ~3x10^22 cm-2. In some of such highly obscured regions, the spectrum show extremely hard continua equivalent to a photon index of ~1, and favor non-thermal interpretation. These results are discussed in the context of thermal and non-thermal emissions, both powered by fast stellar winds from embedded young early-type stars through shock transitions.
△ Less
Submitted 26 October, 2005;
originally announced October 2005.
-
N2H+ Observations of Molecular Cloud Cores in Taurus
Authors:
K. Tatematsu,
T. Umemoto,
R. Kandori,
Y. Sekimoto
Abstract:
N2H+ observations of molecular cloud cores in Taurus with the Nobeyama 45 m radio telescope are reported. We compare ``cores with young stars'' with ``cores without young stars''. The differences in core radius, linewidth, and core mass are small. Linewidth is dominated by thermal motions in both cases. N2H+ maps show that the intensity distribution does not differ much between cores without sta…
▽ More
N2H+ observations of molecular cloud cores in Taurus with the Nobeyama 45 m radio telescope are reported. We compare ``cores with young stars'' with ``cores without young stars''. The differences in core radius, linewidth, and core mass are small. Linewidth is dominated by thermal motions in both cases. N2H+ maps show that the intensity distribution does not differ much between cores without stars and those with stars. This is in contrast to the result previously obtained in H13CO+ toward Taurus molecular cloud cores. Larger degree of depletion of H13CO+ in starless cores will be one possible explanation for this difference. We studied the physical state of molecular cloud cores in terms of ``critical pressure'' for the surface (external) pressure. There is no systematic difference between starless cores and cores with stars in this analysis. Both are not far from the critical state for pressure equilibrium. We suggest that molecular cloud cores in which thermal support is dominated evolve toward star formation by keeping close to the critical state. This result is in contrast with that obtained in the intermediate-mass star forming region OMC-2/3, where molecular cloud cores evolve by decreasing the critical pressure appreciably. We investigate the radial distribution of the integrated intensity. Cores with stars are found to have shallow (-1.8 to -1.6) power-law density profiles.
△ Less
Submitted 27 January, 2004;
originally announced January 2004.
-
Atomic Carbon and CO Isotope Emission in the Vicinity of DR15
Authors:
T. Oka,
S. Yamamoto,
M. Iwata,
H. Maezawa,
M. Ikeda,
T. Ito,
K. Kamegai,
T. Sakai,
Y. Sekimoto,
K. Tatematsu,
Y. Arikawa,
Y. Aso,
T. Noguchi,
S-C. Shi,
K. Miyazawa,
S. Saito,
H. Ozeki,
H. Fujiwara,
M. Ohishi,
J. Inatani
Abstract:
We present observations of the 3P1-3P0 fine structure transition of atomic carbon [CI], the J=3-2 transition of CO, as well as of the J=1-0 transitions of 13CO and C18O toward DR15, an HII region associated with two mid-infrared dark clouds (IRDCs). The 13CO and C18O J=1-0 emissions closely follow the dark patches seen in optical wavelength, showing two self-gravitating molecular cores with mass…
▽ More
We present observations of the 3P1-3P0 fine structure transition of atomic carbon [CI], the J=3-2 transition of CO, as well as of the J=1-0 transitions of 13CO and C18O toward DR15, an HII region associated with two mid-infrared dark clouds (IRDCs). The 13CO and C18O J=1-0 emissions closely follow the dark patches seen in optical wavelength, showing two self-gravitating molecular cores with masses of 2000 Msun and 900 Msun, respectively, at the positions of the catalogued IRDCs.
Our data show a rough spatial correlation between [CI] and 13CO J=1-0. Bright [CI] emission occurs in relatively cold gas behind the molecular cores, neither in highly excited gas traced by CO J=3-2 emission nor in HII region/molecular cloud interface. These results are inconsistent with those predicted by standard photodissociation region (PDR) models, suggesting an origin for interstellar atomic carbon unrelated to photodissociation processes.
△ Less
Submitted 30 May, 2001;
originally announced May 2001.
-
Discovery of X rays from Class 0 protostar candidates in OMC-3
Authors:
Yohko Tsuboi,
Katsuji Koyama,
Kenji Hamaguchi,
Ken'ichi Tatematsu,
Yutaro Sekimoto,
John Bally,
Bo Reipurth
Abstract:
We have observed the Orion Molecular Clouds 2 and 3 (OMC-2 and OMC-3) with the Chandra X-ray Observatory (CXO). The northern part of OMC-3 is found to be particularly rich in new X-ray features; four hard X-ray sources are located in and along the filament of cloud cores. Two sources coincide positionally with the sub$mm$-$mm$ dust condensations of MMS 2 and 3 or an outflow radio source VLA 1, w…
▽ More
We have observed the Orion Molecular Clouds 2 and 3 (OMC-2 and OMC-3) with the Chandra X-ray Observatory (CXO). The northern part of OMC-3 is found to be particularly rich in new X-ray features; four hard X-ray sources are located in and along the filament of cloud cores. Two sources coincide positionally with the sub$mm$-$mm$ dust condensations of MMS 2 and 3 or an outflow radio source VLA 1, which are in a very early phase of star formation. The X-ray spectra of these sources show an absorption column of (1-3) x 10^23 H cm-2. Assuming a moderate temperature plasma, the X-ray luminosity in the 0.5-10 keV band is estimated to be ~10^30 erg s^-1 at a distance of 450 pc. From the large absorption, positional coincidence and moderate luminosity, we infer that the hard X-rays are coming from very young stellar objects embedded in the molecular cloud cores. We found another hard X-ray source near the edge of the dust filament. The extremely high absorption of 3 x 10^23 H cm^-2 indicates that the source must be surrounded by dense gas, suggesting that it is either a YSO in an early accretion phase or a Type II AGN (e.g. a Seyfert 2), although no counterpart is found at any other wavelength. In contrast to the hard X-ray sources, soft X-ray sources are found spread around the dust filaments, most of which are identified with IR sources in the T Tauri phase.
△ Less
Submitted 25 March, 2001;
originally announced March 2001.
-
Large-scale mapping observations of the CI(3P1-3P0) and CO(J=3-2) lines toward the Orion A molecular cloud
Authors:
Masafumi Ikeda,
Hiroyuki Maezawa,
Tetsuya Ito,
Gaku Saito,
Yutaro Sekimoto,
Satoshi Yamamoto,
Ken'ichi Tatematsu,
Yuji Arikawa,
Yoshiyuki Aso,
Takashi Noguchi,
Sheng-Cai Shi,
Keisuke Miyazawa,
Syuji Saito,
Hiroyuki Ozeki,
Hideo Fujiwara,
Masatoshi Ohishi,
Junji Inatani
Abstract:
Large scale mapping observations of the 3P1-3P0 fine structure transition of atomic carbon (CI, 492 GHz) and the J=3-2 transition of CO (346 GHz) toward the Orion A molecular cloud have been carried out with the Mt. Fuji submillimeter-wave telescope. The observations cover 9 square degrees, and include the Orion nebula M42 and the L1641 dark cloud complex. The CI emission extends over almost the…
▽ More
Large scale mapping observations of the 3P1-3P0 fine structure transition of atomic carbon (CI, 492 GHz) and the J=3-2 transition of CO (346 GHz) toward the Orion A molecular cloud have been carried out with the Mt. Fuji submillimeter-wave telescope. The observations cover 9 square degrees, and include the Orion nebula M42 and the L1641 dark cloud complex. The CI emission extends over almost the entire region of the Orion A cloud and is surprisingly similar to that of 13CO(J=1-0).The CO(J=3-2) emission shows a more featureless and extended distribution than CI.The CI/CO(J=3-2) integrated intensity ratio shows a spatial gradient running from the north (0.10) to the south (1.2) of the Orion A cloud, which we interpret as a consequence of the temperature gradient. On the other hand, the CI/13CO(J=1-0) intensity ratio shows no systematic gradient. We have found a good correlation between the CI and 13CO(J=1-0) intensities over the Orion A cloud. This result is discussed on the basis of photodissociation region models.
△ Less
Submitted 14 December, 1999;
originally announced December 1999.
