-
Fabrication of $^{108}$Cd target for the astrophysical p-process studies
Authors:
Sukhendu Saha,
Mousri Paul,
Lalit Kumar Sahoo,
Dipali Basak,
Tanmoy Bar,
Jagannath Datta,
Sandipan Dasgupta,
G. L. N. Reddy,
Chinmay Basu
Abstract:
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adju…
▽ More
The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adjustments were implemented in the Telemark multipocket e-beam setup. The target thickness was determined through the measurement of alpha particle energy loss from a triple alpha source and also by RBS measurements. The thickness of the $^{108}$Cd films varies between 290 to 660 $μ$g/cm$^2$, with a non-uniformity of approximately 10$\%$. X-ray Photoelectron Spectroscopy (XPS) and X-ray Fluorescence (XRF) analyses were conducted to examine the presence of impurities and to assess surface morphology, phase, and chemical composition.
△ Less
Submitted 19 January, 2024;
originally announced February 2024.
-
First (calibration) experiment using proton beam from FRENA at SINP
Authors:
C. Basu,
K. Banerjee,
T. K. Ghosh,
G. Mukherjee,
C. Bhattacharya,
Shraddha S Desai,
R. Shil,
A. K. Saha,
J. K. Meena,
T. Bar,
D. Basak,
L. K. Sahoo,
S. Saha,
C. Marick,
D. Das,
D. Das,
D. Das,
M. Kujur,
S. Roy,
S. S. Basu,
U. Gond,
A. Saha,
A. Das,
M. Samanta,
P. Saha
, et al. (1 additional authors not shown)
Abstract:
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
△ Less
Submitted 24 January, 2024;
originally announced February 2024.
-
Study of $^{113}$In($α,α$) elastic scattering to determine $α$-optical potential relevant for astrophysical $γ$-process
Authors:
Dipali Basak,
Tanmoy Bar,
Lalit Kumar Sahoo,
Sukhendu Saha,
T. K. Rana,
S. Manna,
C. Bhattacharya,
Samir Kundu,
J. K. Sahoo,
J. K. Meena,
A. K. Saha,
Ashok Kumar Mondal,
Chinmay Basu
Abstract:
The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~(…
▽ More
The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~($\sim$86 $μ$g/cm$^2$). An energy-dependent local optical potential parameters set was obtained by analysing the experimental elastic scattering angular distribution data. The local potential parameters are extrapolated for lower energies and are used to measure the $^{113}$In($α,γ$) reaction cross-section.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Experimental study of $α$-induced reactions on $^{113}$In for astrophysical $p$-process
Authors:
Dipali Basak,
Tanmoy Bar,
Abhijit Roy,
Lalit Kumar Sahoo,
Sukhendu Saha,
Jagannath Datta,
Sandipan Dasgupta,
Chinmay Basu
Abstract:
Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employin…
▽ More
Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employing reciprocity theorem. Stacked foil activation method was used to measure the $^{113}$In($α,γ$) and $^{113}$In($α$, n) reactions cross-section near the astrophysical energies. Theoretical statistical model calculations were performed with different nuclear input parameters and compared with the experimental results. An appropriate $α$-optical potential has been identified from the ($α,γ$) and ($α$, n) fitting, which provides the major source of uncertainty in the statistical model calculations. The other nuclear input parameters like level density, and $γ$-ray strength function were also constrained for theoretical calculations. $^{113}$In($α,γ$)$^{117}$Sb and $^{117}$Sb($α,γ$)$^{113}$In reaction rates were calculated using best-fitted input parameters.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Measurement of $^{144}$Sm(p,$γ$) cross-section at Gamow energies
Authors:
Tanmoy Bar,
Dipali Basak,
Lalit Kumar Sahoo,
Sukhendu Saha,
Jagannath Datta,
Sandipan Dasgupta,
Chinmay Basu
Abstract:
The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly h…
▽ More
The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly higher abundance compared to the other neighboring $p$-nuclides (Z $>$ 50). The astrophysical $S-$factor of this reaction has been measured for the first time at E$^{cm}_p=$ 2.57$\pm$0.13 MeV, $S-$ factor$=$2.542$\pm$1.152($\times$10$^{10}$) MeV-b. Cross-section data were compared with the previously measured experimental data from literature and the theoretical predictions obtained using Hauser-Feshbach statistical model codes TALYS 1.96 and NON-SMOKER. A satisfactory agreement between experimental data and theoretical results was observed. Molecular deposition technique was used to prepare the $^{144}$Sm targets having thickness between 100$-$350 $μ$g/cm$^2$ on Al backing. Obtained results were utilized to predict the reaction rates for $^{144}$Sm (p, $γ$) and $^{145}$Eu ($γ$, p) reactions using TALYS 1.96 and the reciprocity theorem.
△ Less
Submitted 7 January, 2024;
originally announced January 2024.
-
Lithium fluoride (LiF) target preparation for nuclear physics experiment
Authors:
Lalit Kumar Sahoo,
Ashok Kumar Mondal,
Dipali Basak,
Chinmay Basu,
Suraj Kumar Karan
Abstract:
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis co…
▽ More
The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis confirms the presence of both the F and Li atoms on sample surface.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Investigation of long lived activity produced due to neutron emitting reactions
Authors:
Tanmoy Bar,
Dipali Basak,
Sukhendu Saha,
Lalit Kumar Sahoo,
Chinmay Basu
Abstract:
In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvatur…
▽ More
In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvature change in cross section of yield are used. Neutron emitting experiments are one of such. Around the globe reactions like $^7Li(p,n)$, $^{13}C(p,n)$, $^{19}F(p,n)$, $^{27}Al(p,n)$ etc. are used to calibrate energy of the beam with accelerator terminal voltage. Neutrons coming from these experiments can interact with surrounding elements. These interactions with neutrons can create long lived gamma activity which may interfere with future measurements. The present study has been done keeping in mind the new Facility for Research in Experimental Nuclear Astrophysics (FRENA) at Saha Institute of Nuclear Physics. It is a 3MV tandetron low energy high current machine.
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Direct reaction contribution in the very low energy $^{19}$F(p,$α_0$) reaction
Authors:
Lalit Kumar Sahoo,
Chinmay Basu
Abstract:
The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F.
The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.