Showing 1–23 of 23 results for author: Narita, A

Power-dependent destabilization forces in trapping nanographene-based nanoparticles

Authors: Theodoros D. Bouloumis, Hao Zhao, Nikolaos Kokkinidis, Yunbin Hu, Viet Giang Truong, Akimitsu Narita, Síle Nic Chormaic

Abstract: In recent years, plasmonic optical tweezers have been used to trap nanoparticles and study interactions with their environment. An unavoidable challenge is the plasmonic heating due to resonant excitation and the resulting temperature rise in the surrounding environment. In this work, we demonstrate optical trapping of nanographene-based polymeric nanoparticles using metamaterial plasmonic tweezer… ▽ More In recent years, plasmonic optical tweezers have been used to trap nanoparticles and study interactions with their environment. An unavoidable challenge is the plasmonic heating due to resonant excitation and the resulting temperature rise in the surrounding environment. In this work, we demonstrate optical trapping of nanographene-based polymeric nanoparticles using metamaterial plasmonic tweezers. We achieved superior trapping performance and trap stiffness values as high as 8.8 (fN/nm)/(mW/$μ\mbox{m}^2$) with optical intensities lower than 1 (mW/$μ\mbox{m}^2$). A range of incident intensities was used to monitor the effect of increasing intensity in the trapping performance. Higher intensities resulted in stronger optical forces, but thermal effects tended to destabilize the trapping. Beyond a critical intensity, where the temperature rise reached 24$^o$C, a large number of particles were being trapped with lower stiffness values indicating the presence of thermal flows. We, therefore, identified a safe intensity regime to avoid detrimental thermal effects. Our platform is ideal for multiple particle trapping in an array configuration and could be used for stable nanopositioning of quantum emitters with controlled interactions with their environment, potentially useful in the field of quantum technologies. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: 25 pages, 7 figures

Length-independent quantum transport through topological band states of graphene nanoribbons

Authors: Song Jiang, Fabrice Scheurer, Qiang Sun, Pascal Ruffieux, Xuelin Yao, Akimitsu Narita, Klaus Mullen, Roman Fasel, Thomas Frederiksen, Guillaume Schull

Abstract: Atomically precise graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic applications due to their widely tunable energy band gaps resulting from lateral quantum confinement and edge effects. Here we report on the electronic transport characterization of an edge-modified GNR suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate. Di… ▽ More Atomically precise graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic applications due to their widely tunable energy band gaps resulting from lateral quantum confinement and edge effects. Here we report on the electronic transport characterization of an edge-modified GNR suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate. Differential conductance measurements on this metal-GNR-metal junction reveal loss-less transport properties (inverse decay length $β< 0.001 /\overset{\circ}{\mathrm{A}}$) with high conductance ($\sim 0.1$ G$_0$) at low voltages (50 meV) over long distances ($z > 10$ nm). The transport behavior is sensitive to the coupling between ribbon and electrodes, an effect that is rationalized using tight-binding and density functional theory simulations. From extensive modelling we infer that the length-independent transport is a manifestation of band transport through topological valence states, which originate from the zigzag segments on the GNR edges. △ Less

Submitted 5 August, 2022; originally announced August 2022.

Growth optimization and device integration of narrow-bandgap graphene nanoribbons

Authors: Gabriela Borin Barin, Qiang Sun, Marco Di Giovannantonio, Cheng-Zhuo Du, Xiao-Ye Wang, Juan Pablo Llinas, Zafer Mutlu, Yuxuan Lin, Jan Wilhelm, Jan Overbeck, Colin Daniels, Michael Lamparski, Hafeesudeen Sahabudeen, Mickael L. Perrin, José I. Urgel, Shantanu Mishra, Amogh Kinikar, Roland Widmer, Samuel Stolz, Max Bommert, Carlo Pignedoli, Xinliang Feng, Michel Calame, Klaus Müllen, Akimitsu Narita , et al. (4 additional authors not shown)

Abstract: The electronic, optical and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for succe… ▽ More The electronic, optical and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, we study the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs), which are expected to have an optimal band gap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultra-high vacuum conditions from Br- and I-substituted precursors. We show that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed us to integrate 5-AGNRs into devices and to realize the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. Our study highlights that optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Scaling and Statistics of Bottom-Up Synthesized Armchair Graphene Nanoribbon Transistors

Authors: Yuxuan Lin, Zafer Mutlu, Gabriela Borin Barin, Jenny Hong, Juan Pablo Llinas, Akimitsu Narita, Hanuman Singh, Klaus Müllen, Pascal Ruffieux, Roman Fasel, Jeffrey Bokor

Abstract: Bottom-up assembled nanomaterials and nanostructures allow for the studies of rich and unprecedented quantum-related and mesoscopic transport phenomena. However, it can be difficult to quantify the correlations between the geometrical or structural parameters obtained from advanced microscopy and measured electrical characteristics when they are made into macroscopic devices. Here, we propose a st… ▽ More Bottom-up assembled nanomaterials and nanostructures allow for the studies of rich and unprecedented quantum-related and mesoscopic transport phenomena. However, it can be difficult to quantify the correlations between the geometrical or structural parameters obtained from advanced microscopy and measured electrical characteristics when they are made into macroscopic devices. Here, we propose a strategy to connect the nanomaterial morphologies and the device performance through a Monte Carlo device model and apply it to understand the scaling trends of bottom-up synthesized armchair graphene nanoribbon (GNR) transistors. A new nanofabrication process is developed for GNR transistors with channel length down to 7 nm. The impacts of the GNR spatial distributions and the device geometries on the device performance are investigated systematically through comparison of experimental data with the model. Through this study, challenges and opportunities of transistor technologies based on bottom-up synthesized GNRs are pinpointed, paving the way to the further improvement of the GNR device performance for future transistor technology nodes. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Coupled spin states in armchair graphene nanoribbons with asymmetric zigzag edge extensions

Authors: Qiang Sun, Xuelin Yao, Oliver Groning, Kristjan Eimre, Carlo A. Pignedoli, Klaus Müllen, Akimitsu Narita, Roman Fasel, Pascal Ruffieux

Abstract: Carbon-based magnetic structures promise significantly longer coherence times than traditional magnetic materials, which is of fundamental importance for spintronic applications. An elegant way of achieving carbon-based magnetic moments is the design of graphene nanostructures with an imbalanced occupation of the two sublattices forming the carbon honeycomb lattice. According to Lieb's theorem, th… ▽ More Carbon-based magnetic structures promise significantly longer coherence times than traditional magnetic materials, which is of fundamental importance for spintronic applications. An elegant way of achieving carbon-based magnetic moments is the design of graphene nanostructures with an imbalanced occupation of the two sublattices forming the carbon honeycomb lattice. According to Lieb's theorem, this induces local magnetic moments that are proportional to the sublattice imbalance. Exact positioning of sublattice imbalanced nanostructures in graphene nanomaterials hence offers a route to control interactions between induced local magnetic moments and to obtain graphene nanomaterials with magnetically non-trivial ground states. Here, we show that such sublattice imbalanced nanostructures can be incorporated along a large band gap armchair graphene nanoribbon on the basis of asymmetric zigzag edge extensions, which is achieved by incorporating specifically designed precursor monomers during the bottom-up fabrication of the graphene nanoribbons. Scanning tunneling spectroscopy of an isolated and electronically decoupled zigzag edge extension reveals Hubbard-split states in accordance with theoretical predictions. Investigation of pairs of such zigzag edge extensions reveals ferromagnetic, antiferromagnetic or quenching of the magnetic interactions depending on the relative alignment of the asymmetric edge extensions. Moreover, a ferromagnetic spin chain is demonstrated for a periodic pattern of zigzag edge extensions along the nanoribbon axis. This work opens a route towards the design and fabrication of graphene nanoribbon-based spin chains with complex magnetic ground states. △ Less

Submitted 28 July, 2020; v1 submitted 5 May, 2020; originally announced May 2020.

Giant magnetic exchange coupling in rhombus-shaped nanographenes with zigzag periphery

Authors: Shantanu Mishra, Xuelin Yao, Qiang Chen, Kristjan Eimre, Oliver Groening, Ricardo Ortiz, Marco Di Giovannantonio, Juan Carlos Sancho-Garcia, Joaquin Fernandez-Rossier, Carlo A. Pignedoli, Klaus Muellen, Pascal Ruffieux, Akimitsu Narita, Roman Fasel

Abstract: Nanographenes with zigzag edges are predicted to manifest non-trivial pi-magnetism resulting from the interplay of hybridization of localized frontier states and Coulomb repulsion between valence electrons. This provides a chemically tunable platform to explore quantum magnetism at the nanoscale and opens avenues toward organic spintronics. The magnetic stability in nanographenes is thus far limit… ▽ More Nanographenes with zigzag edges are predicted to manifest non-trivial pi-magnetism resulting from the interplay of hybridization of localized frontier states and Coulomb repulsion between valence electrons. This provides a chemically tunable platform to explore quantum magnetism at the nanoscale and opens avenues toward organic spintronics. The magnetic stability in nanographenes is thus far limited by the weak magnetic exchange coupling which remains below the room temperature thermal energy. Here, we report the synthesis of large rhombus-shaped nanographenes with zigzag periphery on gold and copper surfaces. Single-molecule scanning probe measurements unveil an emergent magnetic spin-singlet ground state with increasing nanographene size. The magnetic exchange coupling in the largest nanographene, determined by inelastic electron tunneling spectroscopy, exceeds 100 meV or 1160 K, which outclasses most inorganic nanomaterials and remarkably survives on a metal electrode. △ Less

Submitted 7 March, 2020; originally announced March 2020.

Comments: 4 figures plus supplementary information

Journal ref: Nat. Chem. 13, 581-586 (2021)

Controlled quantum dot formation in atomically engineered graphene nanoribbons field-effect transistors

Authors: Maria El Abbassi, Mickael Perrin, Gabriela Borin Barin, Sara Sangtarash, Jan Overbeck, Oliver Braun, Colin Lambert, Qiang Sun, Thorsten Prechtl, Akimitsu Narita, Klaus Mullen, Pascal Ruffieux, Hatef Sadeghi, Roman Fasel, Michel Calame

Abstract: Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($<$50 nm), as well as the preservation of their physical properties upon device integration. In this combi… ▽ More Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($<$50 nm), as well as the preservation of their physical properties upon device integration. In this combined experimental and theoretical study, we report on the quantum dot (QD) behavior of atomically precise GNRs integrated in a device geometry. The devices consist of a film of aligned 5-atoms wide GNRs (5-AGNRs) transferred onto graphene electrodes with a sub 5-nm nanogap. We demonstrate that the narrow-bandgap 5-AGNRs exhibit metal-like behavior resulting in linear IV curves for low bias voltages at room temperature and single-electron transistor behavior for temperatures below 150~K. By performing spectroscopy of the molecular levels at 13~K, we obtain addition energies in the range of 200-300 meV. DFT calculations predict comparable addition energies and reveal the presence of two electronic states within the bandgap of infinite ribbons when the finite length of the 5-AGNRs is accounted for. By demonstrating the preservation of the 5-AGNRs electronic properties upon device integration, as demonstrated by transport spectroscopy, our study provides a critical step forward in the realisation of more exotic GNR-based nano-electronic devices. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Comments: 18 pages, 5 figures

A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons

Authors: Jan Overbeck, Gabriela Borin Barin, Colin Daniels, Mickael L. Perrin, Oliver Braun, Qiang Sun, Rimah Darawish, Marta De Luca, Xiao-Ye Wang, Tim Dumslaff, Akimitsu Narita, Klaus Müllen, Pascal Ruffieux, Vincent Meunier, Roman Fasel, Michel Calame

Abstract: Graphene nanoribbons (GNRs) have attracted considerable interest as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characteriza… ▽ More Graphene nanoribbons (GNRs) have attracted considerable interest as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characterization. In contrast, Raman spectroscopy is a sensitive method for the characterization of GNRs, in particular for investigating their width and structure. Here, we report on a length-dependent, Raman active low-energy vibrational mode that is present in atomically precise, bottom-up synthesized armchair graphene nanoribbons (AGNRs). Our Raman study demonstrates that this mode is present in all families of AGNRs and provides information on their length. Our spectroscopic findings are corroborated by scanning tunneling microscopy images and supported by first-principles calculations that allow us to attribute this mode to a longitudinal acoustic phonon. Finally, we show that this mode is a sensitive probe for the overall structural integrity of the ribbons and their interaction with technologically relevant substrates. △ Less

Submitted 14 December, 2019; originally announced December 2019.

Comments: Unedited author's version

Journal ref: ACS Nano 2019 13 (11), 13083-13091

On-surface synthesis of polyazulene with 2,6-connectivity

Authors: Qiang Sun, Ian Cheng-Yi Hou, Kristjan Eimre, Carlo A. Pignedoli, Pascal Ruffieux, Akimitsu Narita, Roman Fasel

Abstract: Azulene, the smallest neutral nonalternant aromatic hydrocarbon, serves as not only a prototype for fundamental studies but also a versatile building block for functional materials because of its unique opto(electronic) properties. Here, we report the on-surface synthesis and characterization of the homopolymer of azulene connected exclusively at the 2,6-positions using 2,6-diiodoazulene as the mo… ▽ More Azulene, the smallest neutral nonalternant aromatic hydrocarbon, serves as not only a prototype for fundamental studies but also a versatile building block for functional materials because of its unique opto(electronic) properties. Here, we report the on-surface synthesis and characterization of the homopolymer of azulene connected exclusively at the 2,6-positions using 2,6-diiodoazulene as the monomer precursor. As an intermediate to the formation of polyazulene, a gold-(2,6-azulenylene) chain is observed. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Journal ref: Chem. Commun., 2019,55, 13466-13469

On-surface synthesis of antiaromatic and open-shell indeno[2,1-b]fluorene polymers and their lateral fusion into porous ribbons

Authors: Marco Di Giovannantonio, Kristjan Eimre, Aliaksandr V. Yakutovich, Qiang Chen, Shantanu Mishra, José I. Urgel, Carlo A. Pignedoli, Pascal Ruffieux, Klaus Müllen, Akimitsu Narita, Roman Fasel

Abstract: Polycyclic hydrocarbons have received great attention due to their potential role in organic electronics and, for open-shell systems with unpaired electron densities, in spintronics and da-ta storage. However, the intrinsic instability of polyradical hydrocarbons severely limits de-tailed investigations of their electronic structure. Here, we report the on-surface synthesis of conjugated polymers… ▽ More Polycyclic hydrocarbons have received great attention due to their potential role in organic electronics and, for open-shell systems with unpaired electron densities, in spintronics and da-ta storage. However, the intrinsic instability of polyradical hydrocarbons severely limits de-tailed investigations of their electronic structure. Here, we report the on-surface synthesis of conjugated polymers consisting of indeno[2,1-b]fluorene units, which are antiaromatic and open-shell biradicaloids. The observed reaction products, which also include a non-benzenoid porous ribbon arising from lateral fusion of unprotected indeno[2,1-b]fluorene chains, have been characterized via low temperature scanning tunneling microscopy/spectroscopy and non-contact atomic force microscopy, complemented by density-functional theory calculations. These polymers present a low band gap when adsorbed on Au(111). Moreover, their pro-nounced antiaromaticity and radical character, elucidated by ab initio calculations, make them promising candidates for applications in electronics and spintronics. Further, they provide a rich playground to explore magnetism in low-dimensional organic nanomaterials. △ Less

Submitted 29 August, 2019; originally announced August 2019.

Journal ref: J. Am. Chem. Soc. 2019, 141, 31, 12346-12354

Optimized substrates and measurement approaches for Raman spectroscopy of graphene nanoribbons

Authors: Jan Overbeck, Gabriela Borin Barin, Colin Daniels, Mickael Perrin, Liangbo Liang, Oliver Braun, Rimah Darawish, Bryanna Burkhardt, Tim Dumslaff, Xiao-Ye Wang, Akimitsu Narita, Klaus Müllen, Vincent Meunier, Roman Fasel, Michel Calame, Pascal Ruffieux

Abstract: The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this contribution, we use Raman spectroscopy to characterize different types of GNRs on their growth substrate and t… ▽ More The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this contribution, we use Raman spectroscopy to characterize different types of GNRs on their growth substrate and to track their quality upon substrate transfer. We present a Raman-optimized (RO) device substrate and an optimized mapping approach that allows for acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO2/Si substrates. We show that this approach is well-suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, we track the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7- and 9-atom wide armchair GNRs (AGNRs) and compare their frequencies with first-principles calculations. △ Less

Submitted 22 July, 2019; v1 submitted 3 July, 2019; originally announced July 2019.

Comments: *contributed equally 190722 - corrected typos

Multi-wavelength Raman Spectroscopy of Ultra-narrow Nanoribbons Made by Solution-mediated Bottom-up Approach

Authors: Daniele Rizzo, Deborah Prezzi, Alice Ruini, Vaiva Nagyte, Ashok Keerthi, Akimitsu Narita, Uliana Beser, Fugui Xu, Yiyong Mai, Xinliang Feng, Klaus Müllen}, Elisa Molinari, Cinzia Casiraghi

Abstract: Here we present a combined experimental and theoretical study of graphene nanoribbons (GNRs), where detailed multi-wavelength Raman measurements are integrated by accurate ab initio simulations. Our study covers several ultra-narrow GNRs, obtained by means of solution-based bottom-up synthetic approach, allowing to rationalize the effect of edge morphology, position and type of functional groups a… ▽ More Here we present a combined experimental and theoretical study of graphene nanoribbons (GNRs), where detailed multi-wavelength Raman measurements are integrated by accurate ab initio simulations. Our study covers several ultra-narrow GNRs, obtained by means of solution-based bottom-up synthetic approach, allowing to rationalize the effect of edge morphology, position and type of functional groups as well as the length on the GNR Raman spectrum. We show that the low-energy region, especially in presence of bulky functional groups is populated by several modes, and a single radial breathing-like mode cannot be identified. In the Raman optical region, we find that, except for the fully-brominated case, all GNRs functionalized at the edges with different side groups show a characteristic dispersion of the D peak (8-22 cm-1/eV). This has been attributed to the internal degrees of freedom of these functional groups, which act as dispersion-activating defects. The G peak shows small to negligible dispersion in most of the cases, with larger values only in presence of poor control of the edges functionalization, exceeding the values reported for highly defected graphene. In conclusion, we have shown that the characteristic dispersion of the G and D peaks offer further insight on the GNR structure and functionalization, by making Raman spectroscopy an important tool for the characterization of GNRs. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Structure-dependent electrical properties of graphene nanoribbon devices with graphene electrodes

Authors: Leonardo Martini, Zongping Chen, Neeraj Mishra, Gabriela Borin Barin, Paolo Fantuzzi, Pascal Ruffieux, Roman Fasel, Xinliang Feng, Akimitsu Narita, Camilla Coletti, Klaus Müllen, Andrea Candini

Abstract: Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consi… ▽ More Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By analyzing several tens of junctions for each individual GNR type, we observe that the values of the output current display a width-dependent behavior, indicating electronic bandgaps in good agreement with the predicted theoretical values. These results provide insights into the link between the ribbon structure and the device properties, which are fundamental for the development of GNR-based electronics. △ Less

Submitted 8 February, 2019; originally announced February 2019.

Comments: Published in Carbon (2019)

Journal ref: Carbon 146, May 2019, pages 36-43

Substrate transfer and ex situ characterization of on-surface synthesized graphene nanoribbons

Authors: Gabriela Borin Barin, Andrew Fairbrother, Lukas Rotach, Maxime Bayle, Matthieu Paillet, Liangbo Liang, Vincent Meunier, Roland Hauert, Tim Dumslaff, Akimitsu Narita, Klaus Müllen, Hafeesudeen Sahabudeen, Reinhard Berger, Xinliang Feng, Roman Fasel, Pascal Ruffieux

Abstract: Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps that makes them excellent candidates for room-temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. Th… ▽ More Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps that makes them excellent candidates for room-temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions and ex situ characterization. We focus on 7- and 9-atom wide armchair graphene nanoribbons (i.e, 7-AGNR; and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both, 7- and 9-AGNRs from their Au growth sub-strate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer, and reveals that GNRs have remarkable stability under ambient conditions over a 24-month period. The transferred GNRs are analyzed using multi-wavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultra-violet-visible (UV-Vis) spectroscopy △ Less

Submitted 18 January, 2019; originally announced January 2019.

Comments: 30 pages, 14 figures

Pump-Push-Probe for Ultrafast All-Optical Switching: The Case of a Nanographene Molecule

Authors: Giuseppe M. Paterno, Luca Moretti, Alex J. Barker, Qiang Chen, Klaus Müllen, Akimitsu Narita, Giulio Cerullo, Francesco Scotognella, Guglielmo Lanzani

Abstract: In the last two decades, the three-beams pump-push-probe (PPP) technique has become a well-established tool for investigating the multidimensional configurational space of a molecule, as it permits to disclose precious information about the multiple and often complex deactivation pathways of the excited molecule. From the spectroscopic point of view, such a tool has revealed details about the effi… ▽ More In the last two decades, the three-beams pump-push-probe (PPP) technique has become a well-established tool for investigating the multidimensional configurational space of a molecule, as it permits to disclose precious information about the multiple and often complex deactivation pathways of the excited molecule. From the spectroscopic point of view, such a tool has revealed details about the efficiency of charge pairs generation and conformational relaxation in p-conjugated molecules and macromolecules. In addition, PPP has been effectively utilised for modulating the gain signal in conjugated materials by taking advantage of the spectral overlap between stimulated emission and charge absorption in those systems. However, the relatively low stability of conjugated polymers under intense photoexcitation has been a crucial limitation for their real employment in plastic optical fibres (POFs) and for signal control applications. Here, we highlight the role of PPP for achieving ultrafast all-optical switching in p-conjugated systems. Furthermore, we report new experimental data on optical switching of a newly synthesised graphene molecule, namely dibenzo[hi,st]ovalene (DBOV). The superior environmental and photostability of DBOV and, in general, of graphene nanostructures can represent a great advantage for their effective applications in POFs and information and communications technology. △ Less

Submitted 20 December, 2018; originally announced December 2018.

Graphene Nanoribbons on Hexagonal Boron Nitride: Deposition and Transport Characterization

Authors: Tobias Preis, Christian Kick, Andreas Lex, Akimitsu Narita, Yunbin Hu, Kenji Watanabe, Takashi Taniguchi, Klaus Müllen, Dieter Weiss, Jonathan Eroms

Abstract: Chemically synthesized "cove"-type graphene nanoribbons (cGNRs) of different widths were brought into dispersion and drop-cast onto exfoliated hexagonal boron nitride (hBN) on a Si/SiO2 chip. With AFM we observed that the cGNRs form ordered domains aligned along the crystallographic axes of the hBN. Using electron beam lithography and metallization, we contacted the cGNRs with NiCr/Au, or Pd conta… ▽ More Chemically synthesized "cove"-type graphene nanoribbons (cGNRs) of different widths were brought into dispersion and drop-cast onto exfoliated hexagonal boron nitride (hBN) on a Si/SiO2 chip. With AFM we observed that the cGNRs form ordered domains aligned along the crystallographic axes of the hBN. Using electron beam lithography and metallization, we contacted the cGNRs with NiCr/Au, or Pd contacts and measured their I-V-characteristics. The transport through the ribbons was dominated by the Schottky behavior of the contacts between the metal and the ribbon. △ Less

Submitted 2 May, 2019; v1 submitted 16 October, 2018; originally announced October 2018.

Comments: manuscript accepted by APL

Journal ref: Appl. Phys. Lett. 114, 173101 (2019)

Probing optical excitations in chevron-like armchair graphene nanoribbons

Authors: Richard Denk, Alberto Lodi-Rizzini, Shudong Wang, Michael Hohage, Peter Zeppenfeld, Jinming Cai, Roman Fasel, Pascal Ruffieux, Reinhard Berger, Z. Chen, Akimitsu Narita, Xiliang Feng, Klaus Muellen, Roberto Biagi, Valentina De Renzi, Deborah Prezzi, Alice Ruini, Andrea Ferretti

Abstract: The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-init… ▽ More The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-initio simulations, we demonstrate that their excited-state properties are dominated by strongly bound excitons. The spectral fingerprints corresponding to different reaction stages in their bottom-up fabrication are also unequivocally identified, allowing us to follow the exciton build-up from the starting monomer precursor to the final ribbon structure. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Journal ref: Nanoscale 9, 18326-18333 (2017)

Charge transport mechanism in networks of armchair graphene nanoribbons

Authors: Nils Richter, Zongping Chen, Alexander Tries, Thorsten Prechtl, Akimitsu Narita, Klaus Müllen, Kamal Asadi, Mischa Bonn, Mathias Kläui

Abstract: In graphene nanoribbons (GNRs), the lateral confinement of charge carriers opens a band gap, the key feature to enable novel graphene-based electronics. Successful synthesis of GNRs has triggered efforts to realize field-effect transistors (FETs) based on single ribbons. Despite great progress, reliable and reproducible fabrication of single-ribbon FETs is still a challenge that impedes applicatio… ▽ More In graphene nanoribbons (GNRs), the lateral confinement of charge carriers opens a band gap, the key feature to enable novel graphene-based electronics. Successful synthesis of GNRs has triggered efforts to realize field-effect transistors (FETs) based on single ribbons. Despite great progress, reliable and reproducible fabrication of single-ribbon FETs is still a challenge that impedes applications and the understanding of the charge transport. Here, we present reproducible fabrication of armchair GNR-FETs based on a network of nanoribbons and analyze the charge transport mechanism using nine-atom wide and, in particular, five-atom-wide GNRs with unprecedented conductivity. We show formation of reliable Ohmic contacts and a yield of functional FETs close to unity by lamination of GNRs on the electrodes. Modeling the charge carrier transport in the networks reveals that this process is governed by inter-ribbon hopping mediated by nuclear tunneling, with a hopping length comparable to the physical length of the GNRs. Furthermore, we demonstrate that nuclear tunneling is a general charge transport characteristic of the GNR networks by using two different GNRs. Overcoming the challenge of low-yield single-ribbon transistors by the networks and identifying the corresponding charge transport mechanism puts GNR-based electronics in a new perspective. △ Less

Submitted 4 June, 2018; originally announced June 2018.

Engineering of robust topological quantum phases in graphene nanoribbons

Authors: Oliver Gröning, Shiyong Wang, Xuelin Yao, Carlo A. Pignedoli, Gabriela Borin Barin, Colin Daniels, Andrew Cupo, Vincent Meunier, Xinliang Feng, Akimitsu Narita, Klaus Müllen, Pascal Ruffieux, Roman Fasel

Abstract: Here we present a flexible strategy to realize robust nanomaterials exhibiting valence electronic structures whose fundamental physics is described by the SSH-Hamiltonian. These solid-state materials are realized using atomically precise graphene nanoribbons (GNR). We demonstrate the controlled periodic coupling of topological boundary states at junctions of armchair GNRs of different widths to cr… ▽ More Here we present a flexible strategy to realize robust nanomaterials exhibiting valence electronic structures whose fundamental physics is described by the SSH-Hamiltonian. These solid-state materials are realized using atomically precise graphene nanoribbons (GNR). We demonstrate the controlled periodic coupling of topological boundary states at junctions of armchair GNRs of different widths to create quasi-1D trivial and non-trivial electronic quantum phases. Their topological class is experimentally determined by drawing upon the bulk-boundary correspondence and measuring the presence (non-trivial) or absence (trivial) of localized end states by scanning tunneling spectroscopy (STS). The strategy we propose has the potential to tune the band width of the topological electronic bands close to the energy scale of proximity induced spin-orbit coupling or superconductivity, and may allow the realization of Kitaev like Hamiltonians and Majorana type end states. △ Less

Submitted 17 May, 2018; originally announced May 2018.

Single photon emission from graphene quantum dots at room temperature

Authors: S. Zhao, J. Lavie, L. Rondin, L. Orcin-Chaix, C. Diederichs, Ph. Roussignol, Y. Chassagneux, C. Voisin, K. Müllen, A. Narita, S. Campidelli, J. S. Lauret

Abstract: In the field of condensed matter, graphene plays a central role as an emerging material for nanoelectronics. Nevertheless, graphene is a semimetal, which constitutes a severe limitation for some future applications. Therefore, a lot of efforts are being made to develop semiconductor materials whose structure is compatible with the graphene lattice. In this perspective, little pieces of graphene re… ▽ More In the field of condensed matter, graphene plays a central role as an emerging material for nanoelectronics. Nevertheless, graphene is a semimetal, which constitutes a severe limitation for some future applications. Therefore, a lot of efforts are being made to develop semiconductor materials whose structure is compatible with the graphene lattice. In this perspective, little pieces of graphene represent a promising alternative. In particular, their electronic, optical and spin properties can be in principle controlled by designing their size, shape and edges. As an example, graphene nanoribbons with zigzag edges have localized spin polarized states. Likewise, singlet-triplet energy splitting can be chosen by designing the structure of graphene quantum dots. Moreover, bottom-up molecular synthesis put these potentialities at our fingertips. Here, we report on a single emitter study that directly addresses the intrinsic properties of a single graphene quantum dot. In particular, we show that graphene quantum dots emit single photons at room temperature with a high purity, a high brightness and a good photostability. These results pave the way to the development of new quantum systems based on these nanoscale pieces of graphene. △ Less

Submitted 27 February, 2018; originally announced February 2018.

Strong Exciton-Photon Coupling in a Nanographene Filled Microcavity

Authors: David M Coles, Qiang Chen, Lucas C Flatten, Jason M Smith, Klaus Müllen, Akimitsu Narita, David G Lidzey

Abstract: Dibenzo[\emph{hi,st}]ovalene (DBOV) - a quasi-zero-dimensional `nanographene' - displays strong, narrow, and well-defined optical-absorption transitions at room temperature. On placing a DBOV-doped polymer film into an optical microcavity, we demonstrate strong coupling of the \textbf{0 $\rightarrow$ 0'} electronic and \textbf{0 $\rightarrow$ 1'} vibrational transitions to a confined cavity mode,… ▽ More Dibenzo[\emph{hi,st}]ovalene (DBOV) - a quasi-zero-dimensional `nanographene' - displays strong, narrow, and well-defined optical-absorption transitions at room temperature. On placing a DBOV-doped polymer film into an optical microcavity, we demonstrate strong coupling of the \textbf{0 $\rightarrow$ 0'} electronic and \textbf{0 $\rightarrow$ 1'} vibrational transitions to a confined cavity mode, with coupling energies of 104 meV and 40 meV, respectively. Photoluminescence measurements indicate that the polariton population is distributed between the lower and middle polariton branches at energies approximately coincident with the emission of the DBOV, indicating polariton population via an optical pumping mechanism. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: A peer reviewed, updated and corrected version of this article appears in Nano Letters

Short-Channel Field Effect Transistors with 9-Atom and 13-Atom wide Graphene Nanoribbons

Authors: Juan Pablo Llinas, Andrew Fairbrother, Gabriela Borin Barin, Wu Shi, Kyunghoon Lee, Shuang Wu, Byung Yong Choi, Rohit Braganza, Jordan Lear, Nicholas Kau, Wonwoo Choi, Chen Chen, Zahra Pedramrazi, Tim Dumslaff, Akimitsu Narita, Xinliang Feng, Klaus Müllen, Felix Fischer, Alex Zettl, Pascal Ruffieux, Eli Yablonovitch, Michael Crommie, Roman Fasel, Jeffrey Bokor

Abstract: Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) dev… ▽ More Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) devices with a thin, high-k gate dielectric and a 9-atom wide (0.95 nm) armchair GNR as the channel material, we demonstrate FETs with high on-current (Ion >1 uA at Vd = -1 V) and high Ion/Ioff ~10^5 at room temperature. We find that the performance of these devices is limited by tunnelling through the Schottky barrier (SB) at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high performance short-channel FETs with bottom-up synthesized armchair GNRs. △ Less

Submitted 27 January, 2017; v1 submitted 21 May, 2016; originally announced May 2016.

Comments: v3: added local back gate data

Journal ref: Nature Communications 8, Article number: 633 (2017)

Raman fingerprints of atomically precise graphene nanoribbons

Authors: Ivan A. Verzhbitskiy, Marzio De Corato, Alice Ruini, Elisa Molinari, Akimitsu Narita, Yunbin Hu, Matthias Georg Schwab, M. Bruna, D. Yoon, S. Milana, Xinliang Feng, Klaus Müllen, Andrea C. Ferrari, Cinzia Casiraghi, Deborah Prezzi

Abstract: Bottom-up approaches allow the production of ultra-narrow and atomically precise graphene nanoribbons (GNRs), with electronic and optical properties controlled by the specific atomic structure. Combining Raman spectroscopy and ab-initio simulations, we show that GNR width, edge geometry and functional groups all influence their Raman spectra. The low-energy spectral region below 1000 cm-1 is parti… ▽ More Bottom-up approaches allow the production of ultra-narrow and atomically precise graphene nanoribbons (GNRs), with electronic and optical properties controlled by the specific atomic structure. Combining Raman spectroscopy and ab-initio simulations, we show that GNR width, edge geometry and functional groups all influence their Raman spectra. The low-energy spectral region below 1000 cm-1 is particularly sensitive to edge morphology and functionalization, while the D peak dispersion can be used to uniquely fingerprint the presence of GNRs, and differentiates them from other sp2 carbon nanostructures. △ Less

Submitted 13 May, 2016; originally announced May 2016.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, copyright \c{opyright} American Chemical Society after peer review. To access the final edited and published work see DOI: 10.1021/acs.nanolett.5b04183