-
Higgs Physics at a $\sqrt{s}=3$ TeV Muon Collider with detailed detector simulation
Authors:
Paolo Andreetto,
Nazar Bartosik,
Laura Buonincontri,
Daniele Calzolari,
Vieri Candelise,
Massimo Casarsa,
Luca Castelli,
Mauro Chiesa,
Anna Colaleo,
Giacomo Da Molin,
Matthew Forslund,
Luca Giambastiani,
Alessio Gianelle,
Karol Krizka,
Sergo Jindariani,
Anton Lechner,
Donatella Lucchesi,
Leo Mareso,
Paola Mastrapasqua,
Patrick Meade,
Alessandro Montella,
Simone Pagan Griso,
Nadia Pastrone,
Lorenzo Sestini,
Rosamaria Venditti
, et al. (2 additional authors not shown)
Abstract:
The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production cross section in muon collisions at these high energies, the collider can be considered a Higgs factory. It holds the capability to significantly advance our understanding of the Higgs sector to an u…
▽ More
The Muon Collider is one of the most promising future collider facilities with the potential to reach multi-TeV center-of-mass energy and high luminosity. Due to the significant Higgs boson production cross section in muon collisions at these high energies, the collider can be considered a Higgs factory. It holds the capability to significantly advance our understanding of the Higgs sector to an unprecedented level of precision. However, the presence of beam-induced background resulting from the decay of the beam muons poses unique challenges for detector development and event reconstruction. In this paper, the prospects for various measurements of the Higgs boson production cross sections at a $\sqrt{s}=3$ TeV collider are presented using a detailed detector simulation in a realistic environment. The study demonstrates the feasibility of achieving high precision measurements of the Higgs boson production cross sections with the current state-of-the-art detector design. In addition, the paper discusses the detector requirements necessary for obtaining such resolutions and for measuring the Higgs trilinear self-coupling.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
On-Surface Carbon Nitride Growth from Polymerization of 2,5,8-Triazido-s-heptazine
Authors:
Matthias Krinninger,
Nicolas Bock,
Sebastian Kaiser,
Johanna Plansky,
Tobias Bruhm,
Felix Haag,
Francesco Allegretti,
Ueli Heiz,
Klaus Koehler,
Barbara A. J. Lechner,
Friedrich Esch
Abstract:
Carbon nitrides have recently come into focus for photo- and thermal catalysis, both as support materials for metal nanoparticles as well as photocatalysts themselves. While many approaches for the synthesis of three-dimensional carbon nitride materials are available, only top-down approaches by exfoliation of powders lead to thin film flakes of this inherently two-dimensional material. Here, we d…
▽ More
Carbon nitrides have recently come into focus for photo- and thermal catalysis, both as support materials for metal nanoparticles as well as photocatalysts themselves. While many approaches for the synthesis of three-dimensional carbon nitride materials are available, only top-down approaches by exfoliation of powders lead to thin film flakes of this inherently two-dimensional material. Here, we describe an in situ on-surface synthesis of monolayer 2D carbon nitride films, as a first step towards precise combination with other 2D materials. Starting with a single monomer precursor, we show that 2,5,8-triazido-s-heptazine (TAH) can be evaporated intact, deposited on a single crystalline Au(111) or graphite support, and activated via azide decomposition and subsequent coupling to form a covalent polyheptazine network. We demonstrate that the activation can occur in three pathways, via electrons (X-ray illumination), photons (UV illumination) and thermally. Our work paves the way to coat materials with extended carbon nitride networks which are, as we show, stable under ambient conditions.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Power deposition studies for standard and crystal-assisted heavy ion collimation inthe CERN Large Hadron Collider
Authors:
J. B. Potoine,
R. Bruce,
R. Cai,
F. Cerutti,
M. D'Andrea,
L. Esposito,
P. D. Hermes,
A. Lechner,
D. Mirarchi,
S. Redaelli,
V. Rodin,
F. Salvat Pujo,
P. Schoofs,
A. Waets,
F. Wrobel
Abstract:
The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets agains…
▽ More
The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets against beam losses. However, nuclear fragmentation and electromagnetic dissociation of $^{208}$Pb$^{82+}$ ions in collimators generates a flux of secondary fragments, which are lost in downstream dispersion suppressor and arc cells. These secondary ions may pose a performance limitation in upcoming runs since they can induce magnet quenches. In order to mitigate this risk, an alternative collimation technique, relying on bent crystals as primary collimators, will be used in forthcoming heavy-ion runs. In this paper, we study the power deposition in superconducting magnets by means of tracking and \textsc{FLUKA} shower simulations, comparing the standard collimation system against the crystal-based one. In order to quantify the predictive ability of the simulation model, we present absolute benchmarks against beam loss monitor measurements from the 2018 $^{208}$Pb$^{82+}$ run at 6.37~$Z$TeV. The benchmarks cover several hundred meters of beamline, from the primary collimators to the first arc cells. Based on these studies, we provide a detailed analysis of ion fragmentation and leakage to the cold magnets and quantify the expected quench margin in future $^{208}$Pb$^{82+}$ runs.
△ Less
Submitted 7 April, 2023;
originally announced April 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Does cluster encapsulation inhibit sintering? Stabilization of size-selected Pt clusters on Fe$_3$O$_4$(001) by SMSI
Authors:
Sebastian Kaiser,
Johanna Plansky,
Matthias Krinninger,
Andrey Shavorskiy,
Suyun Zhu,
Ueli Heiz,
Friedrich Esch,
Barbara A. J. Lechner
Abstract:
The metastability of supported metal nanoparticles limits their application in heterogeneous catalysis at elevated temperatures due to their tendency to sinter. One strategy to overcome these thermodynamic limits on reducible oxide supports is encapsulation via strong metal-support interaction (SMSI). While annealing-induced encapsulation is a well-explored phenomenon for extended nanoparticles, i…
▽ More
The metastability of supported metal nanoparticles limits their application in heterogeneous catalysis at elevated temperatures due to their tendency to sinter. One strategy to overcome these thermodynamic limits on reducible oxide supports is encapsulation via strong metal-support interaction (SMSI). While annealing-induced encapsulation is a well-explored phenomenon for extended nanoparticles, it is as yet unknown whether the same mechanisms hold for sub-nanometer clusters, where concomitant sintering and alloying might play a significant role. In this article, we explore the encapsulation and stability of size-selected Pt$_5$, Pt$_{10}$ and Pt$_{19}$ clusters deposited on Fe$_3$O$_4$(001). In a multimodal approach using temperature-programmed desorption (TPD), x-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), we demonstrate that SMSI indeed leads to the formation of a defective, FeO-like conglomerate encapsulating the clusters. By stepwise annealing up to 1023 K, we observe the succession of encapsulation, cluster coalescence and Ostwald ripening, resulting in square-shaped crystalline Pt particles, independent of the initial cluster sizes. The respective sintering onset temperatures scale with the cluster footprint and thus size. Remarkably, while small encapsulated clusters can still diffuse as a whole, atom detachment and thus Ostwald ripening are successfully suppressed up to 823 K, i.e. 200 K above the Hüttig temperature that indicates the thermodynamic stability limit.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Tuning SMSI Kinetics on Pt-loaded TiO$_2$(110) by Choosing the Pressure: A Combined UHV / Near-Ambient Pressure XPS Study
Authors:
Philip Petzoldt,
Moritz Eder,
Sonia Mackewicz,
Monika Blum,
Tim Kratky,
Sebastian Günther,
Martin Tschurl,
Ueli Heiz,
Barbara A. J. Lechner
Abstract:
Pt catalyst particles on reducible oxide supports often change their activity significantly at elevated temperatures due to the strong metal-support interaction (SMSI), which induces the formation of an encapsulation layer around the noble metal particles. However, the impact of oxidizing and reducing treatments at elevated pressures on this encapsulation layer remains controversial, partly due to…
▽ More
Pt catalyst particles on reducible oxide supports often change their activity significantly at elevated temperatures due to the strong metal-support interaction (SMSI), which induces the formation of an encapsulation layer around the noble metal particles. However, the impact of oxidizing and reducing treatments at elevated pressures on this encapsulation layer remains controversial, partly due to the 'pressure gap' between surface science studies and applied catalysis. In the present work, we employ synchrotron-based near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to study the effect of O$_2$ and H$_2$ on the SMSI-state of well-defined Pt/TiO$_2$(110) catalysts at pressures of up to 0.1 Torr. By tuning the O$_2$ pressure, we can either selectively oxidize the TiO$_2$ support or both the support and the Pt particles. Catalyzed by metallic Pt, the encapsulating oxide overlayer grows rapidly in 1x10$^{-5}$ Torr O$_2$, but orders of magnitudes less effective at higher O$_2$ pressures, where Pt is in an oxidic state. While the oxidation/reduction of Pt particles is reversible, they remain embedded in the support once encapsulation has occurred.
△ Less
Submitted 22 September, 2022;
originally announced September 2022.
-
PyfastSPM: A Python package to convert 1D FastSPM data streams into publication quality movies
Authors:
K. Briegel,
F. Riccius,
J. Filser,
A. Bourgund,
R. Spitzenpfeil,
M. Panighel,
C. Dri,
B. A. J. Lechner,
F. Esch
Abstract:
In a continued quest to monitor subsecond surface dynamics on the atomic scale and to improve imaging resolution, a FAST module to accelerate existing scanning probe microscopy setups was previously presented. Hereby, the speedup is enabled by external electronics without modification of the actual instrument. The resulting one-dimensional (1D) data stream, recorded while the tip oscillates in a s…
▽ More
In a continued quest to monitor subsecond surface dynamics on the atomic scale and to improve imaging resolution, a FAST module to accelerate existing scanning probe microscopy setups was previously presented. Hereby, the speedup is enabled by external electronics without modification of the actual instrument. The resulting one-dimensional (1D) data stream, recorded while the tip oscillates in a sinusoidal motion, has to be reconstructed into a layered rectangular matrix in order to visualize the movie. The Pythonbased pyfastspm package performs this conversion, while also correcting for sample tilt, noise frequencies, piezo creep, and thermal drift. Quick automatic conversion even of considerable batches of data is achieved by efficient algorithms that bundle time-expensive steps, such as interpolation based on Delaunay triangulation.
△ Less
Submitted 1 August, 2022;
originally announced September 2022.
-
Energy deposition studies in the LHCb insertion region from the validation to a step into the Hilumi challenge
Authors:
Alessia Ciccotelli,
Robert B. Appleby,
Francesco Cerutti,
Kacper Bilko,
Luigi Salvatore Esposito,
Ruben Garcia Alia,
Anton Lechner,
Andrea Tsinganis
Abstract:
The LHCb (Large Hadron Collider beauty) experiment at CERN aims at achieving a significantly higher luminosity than originally planned by means of two major upgrades: the Upgrade I that took place during the Long Shutdown 2 (LS2) and the Upgrade II foreseen for LS4. Such an increase in instantaneous and integrated luminosity with respect to the design values requires to reassess the radiation expo…
▽ More
The LHCb (Large Hadron Collider beauty) experiment at CERN aims at achieving a significantly higher luminosity than originally planned by means of two major upgrades: the Upgrade I that took place during the Long Shutdown 2 (LS2) and the Upgrade II foreseen for LS4. Such an increase in instantaneous and integrated luminosity with respect to the design values requires to reassess the radiation exposure of LHC magnets, cryogenics and electronic equipment placed in the Insertion Region 8 (IR8) around LHCb. Monte Carlo simulations are a powerful tool to understand and predict the interaction between particle showers and accelerator elements, especially in case of future scenarios. For this purpose, their validation through the comparison with available measurements is a relevant step. A detailed IR8 model, including the LHCb detector, has been implemented with the FLUKA code. The objective of this study is to evaluate radiation levels due to proton-proton collisions and benchmark the predicted dose values against Beam Loss Monitor (BLM) measurements performed in 2018. Finally, we comment on the upcoming LHC run (Run 3), featuring a first luminosity jump in LHCb.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Study of dust-induced beam losses in the cryogenic arcs of the CERN Large Hadron Collider
Authors:
A. Lechner,
P. Bélanger,
I. Efthymiopoulos,
L. Grob,
B. Lindstrom,
R. Schmidt,
D. Wollmann
Abstract:
The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger bea…
▽ More
The interaction of dust particles with the LHC proton beams accounts for a major fraction of irregular beam loss events observed in LHC physics operation. The events cease after a few beam revolutions because of the expulsion of dust particles from the beam once they become ionized in the transverse beam tails. Despite the transient nature of these events, the resulting beam losses can trigger beam aborts or provoke quenches of superconducting magnets. In this paper, we study the characteristics of beam-dust particle interactions in the cryogenic arcs by reconstructing key observables like nuclear collision rates, loss durations and integral losses per event. The study is based on events recorded during 6.5 TeV operation with stored beam intensities of up to $\sim 3\times 10{^{14}}$ protons per beam. We show that inelastic collision rates can reach almost $10^{12}$ collisions per second, resulting in a loss of up to $\sim 1.6\times 10^{8}$ protons per event. We demonstrate that the experimental distributions and their dependence on beam parameters can be described quantitatively by a previously developed simulation model if dust particles are assumed to be attracted by the beam. The latter finding is consistent with recent time profile studies and yields further evidence that dust particles carry a negative charge when entering the beam. We also develop different hypotheses regarding the absence of higher-loss events in the measurements, although such events are theoretically not excluded by the simulation model. The results provide grounds for predicting dust-induced beam losses in presence of higher-intensity beams in future runs of the High-Luminosity LHC.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices
Authors:
Jorge Maestre,
Cristina Bahamonde,
Inigo Lamas Garcia,
Keith Kershaw,
Nicolo Biancacci,
Josep Busom,
Matthias Frankl,
Anton Lechner,
Adnan Kurtulus,
Shunsuke Makimura,
Naofumi Nakazato,
Ana Teresa Perez,
Antonio Perillo-Marcone,
Benoit Salvant,
Regis Seidenbinder,
Lorenzo Teofili,
Marco Calviani
Abstract:
Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the…
▽ More
Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the LHC. Several issues with the TDI were encountered during LHC operation, most of them due to outgassing from its core components induced by electron cloud effects, which led to limitations of the injector intensity and hence had an impact on LHC availability. The absorbing cores of the TDIs, and of beam intercepting devices in general, need to deal with high thermo-mechanical loads induced by the high intensity particle beams. In addition, devices such as the TDI - where the absorbing materials are installed close to the beam, are important contributors to the accelerator impedance budget. To reduce impedance, the absorbing materials that make up the core must be typically coated with high electrical conductivity metals. Beam impact testing of the coated absorbers is a crucial element of development work to ensure their correct operation. The behaviour of several metal-coated absorber materials was investigated when exposed to high intensity and high energy proton beams in the HiRadMat facility at CERN. Different coating configurations based on copper and molybdenum, and absorbing materials such as isostatic graphite, Carbon Fibre Composite (CfC) and Silicon Carbide reinforced with Silicon Carbide fibres (SiC-SiC), were tested in the facility to assess the TDI's performance and to extract information for other BIDs using these materials. In addition to beam impact tests and an extensive Post Irradiation Examination (PIE) campaign, extensive numerical simulations were carried out.
△ Less
Submitted 22 December, 2021; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Design and behaviour of the Large Hadron Collider external beam dumps capable of receiving 539 MJ/dump
Authors:
J. Maestre,
C. Torregrosa,
K. Kershaw,
C. Bracco,
T. Coiffet,
M. Ferrari,
R. Franqueira Ximenes,
S. Gilardoni,
D. Grenier,
A. Lechner,
V. Maire,
J. M. Martin Ruiz,
E. Matheson,
N. Solieri,
A. Perillo Marcone,
T. Polzin,
V. Rizzoglio,
D. Senajova,
C. Sharp,
M. Timmins,
M. Calviani
Abstract:
Two 6-t beam dumps, made of a graphite core encapsulated in a stainless steel vessel, are used to absorb the energy of the two Large Hadron Collider (LHC) intense proton beams during operation of the accelerator. Operational issues started to appear in 2015 during LHC Run 2 (2014-2018) as a consequence of the progressive increase of the LHC beam kinetic energy, necessitating technical intervention…
▽ More
Two 6-t beam dumps, made of a graphite core encapsulated in a stainless steel vessel, are used to absorb the energy of the two Large Hadron Collider (LHC) intense proton beams during operation of the accelerator. Operational issues started to appear in 2015 during LHC Run 2 (2014-2018) as a consequence of the progressive increase of the LHC beam kinetic energy, necessitating technical interventions in the highly radioactive areas around the dumps. Nitrogen gas leaks appeared after highly energetic beam impacts and instrumentation measurements indicated an initially unforeseen movement of the dumps. A computer modelling analysis campaign was launched to understand the origin of these issues, including both Monte Carlo simulations to model the proton beam interaction as well as advanced thermo-mechanical analyses. The main findings were that the amount of instantaneous energy deposited in the dump vessel leads to a strong dynamic response of the whole dump and high accelerations (above 2000g). Based on these findings, an upgraded design, including a new support system and beam windows, was implemented to ensure the dumps' compatibility with the more intense beams foreseen during LHC Run 3 (2022-2025) of 539 MJ per beam. In this paper an integral overview of the operational behaviour of the dumps and the upgraded configurations are discussed.
△ Less
Submitted 27 October, 2021; v1 submitted 17 October, 2021;
originally announced October 2021.
-
Cluster Catalysis with Lattice Oxygen: Tracing Oxygen Transport from a Magnetite(001) Support onto Small Pt Clusters
Authors:
Sebastian Kaiser,
Farahnaz Maleki,
Ke Zhang,
Wolfgang Harbich,
Ueli Heiz,
Sergio Tosoni,
Barbara A. J. Lechner,
Gianfranco Pacchioni,
Friedrich Esch
Abstract:
Oxidation catalysis on reducible oxide-supported small metal clusters often involves lattice oxygen. In the present work, we trace the path of lattice oxygen from Fe3O4(001) onto small Pt clusters during the CO oxidation, aiming at differentiating whether the reaction takes place at the cluster/support interface or on the cluster. While oxygen vacancies form on many other supports, magnetite maint…
▽ More
Oxidation catalysis on reducible oxide-supported small metal clusters often involves lattice oxygen. In the present work, we trace the path of lattice oxygen from Fe3O4(001) onto small Pt clusters during the CO oxidation, aiming at differentiating whether the reaction takes place at the cluster/support interface or on the cluster. While oxygen vacancies form on many other supports, magnetite maintains its surface stoichiometry upon reduction thanks to a high cation mobility. In order to investigate whether size-dependent oxygen affinities play a role, we study two specific cluster sizes, Pt5 and Pt19. By separating different reaction steps in our experiment, lattice oxygen can be accumulated on the clusters. Temperature programmed desorption (TPD) and sophisticated pulsed valve experiments indicate that the CO oxidation takes place on the Pt clusters rather than at the interface. Scanning tunneling microscopy (STM) shows a decrease in apparent height of the clusters, which density functional theory (DFT) explains as a restructuring following lattice oxygen reverse spillover.
△ Less
Submitted 7 April, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Bound-free pair production from nuclear collisions and the steady-state quench limit of the main dipole magnets of the CERN Large Hadron Collider
Authors:
Michaela Schaumann,
John M. Jowett,
Cristina Bahamonde Castro,
Roderik Bruce,
Anton Lechner,
Tom Mertens
Abstract:
During its Run 2 (2015-2018), the Large Hadron Collider (LHC) operated at almost twice higher energy, and provided Pb-Pb collisions with an order of magnitude higher luminosity, than in the previous Run 1. In consequence, the power of the secondary beams emitted from the interaction points by the bound-free pair production (BFPP) process increased by a factor ~20, while the propensity of the bendi…
▽ More
During its Run 2 (2015-2018), the Large Hadron Collider (LHC) operated at almost twice higher energy, and provided Pb-Pb collisions with an order of magnitude higher luminosity, than in the previous Run 1. In consequence, the power of the secondary beams emitted from the interaction points by the bound-free pair production (BFPP) process increased by a factor ~20, while the propensity of the bending magnets to quench increased with the higher magnetic field. This beam power is about 35 times greater than that contained in the luminosity debris from hadronic interactions and is focused on specific locations that fall naturally inside superconducting magnets. The risk of quenching these magnets has long been recognized as severe and there are operational limitations due to the dynamic heat load that must be evacuated by the cryogenic system. High-luminosity operation was nevertheless possible thanks to orbit bumps that were introduced in the dispersion suppressors around the ATLAS and CMS experiments to prevent quenches by displacing and spreading out these beam losses. Further, in 2015, the BFPP beams were manipulated to induce a controlled quench, thus providing the first direct measurement of the steady-state quench level of an LHC dipole magnet. The same experiment demonstrated the need for new collimators that are being installed around the ALICE experiment to intercept the secondary beams in the future. This paper discusses the experience with BFPP at luminosities very close to the future High Luminosity LHC (HL-LHC) target, gives results on the risk reduction by orbit bumps and presents a detailed analysis of the controlled quench experiment.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Influence of Local Defects on the Dynamics of O-H Bond Breaking and Formation on a Magnetite Surface
Authors:
Alexander Bourgund,
Barbara A. J. Lechner,
Matthias Meier,
Cesare Franchini,
Gareth S. Parkinson,
Ueli Heiz,
Friedrich Esch
Abstract:
The transport of H adatoms across oxide supports plays an important role in many catalytic reactions. We investigate the dynamics of H/Fe3O4(001) between 295 and 382 K. By scanning tunneling microscopy at frame rates of up to 19.6 fps, we observe the thermally activated switching of H between two O atoms on neighboring Fe rows. This switching rate changes in proximity to a defect, explained by den…
▽ More
The transport of H adatoms across oxide supports plays an important role in many catalytic reactions. We investigate the dynamics of H/Fe3O4(001) between 295 and 382 K. By scanning tunneling microscopy at frame rates of up to 19.6 fps, we observe the thermally activated switching of H between two O atoms on neighboring Fe rows. This switching rate changes in proximity to a defect, explained by density functional theory as a distortion in the Fe-O lattice shortening the diffusion path. Quantitative analysis yields an apparent activation barrier of 0.94 +/- 0.07 eV on a pristine surface. The present work highlights the importance of local techniques in the study of atomic-scale dynamics at defective surfaces such as oxide supports.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
A Microscopy Approach to Investigating the Energetics of Small Supported Metal Clusters
Authors:
Barbara A. J. Lechner,
Fabian Knoller,
Alexander Bourgund,
Ueli Heiz,
Friedrich Esch
Abstract:
Metal clusters are partway between molecular and bulk systems and thus exhibit special physical and chemical properties. Atoms can rearrange within a cluster to form different structural isomers. Internal degrees of freedom and the interaction with the support - which both are dependent on cluster size - can promote diffusion across a support. Here, we show how fast scanning tunneling microscopy (…
▽ More
Metal clusters are partway between molecular and bulk systems and thus exhibit special physical and chemical properties. Atoms can rearrange within a cluster to form different structural isomers. Internal degrees of freedom and the interaction with the support - which both are dependent on cluster size - can promote diffusion across a support. Here, we show how fast scanning tunneling microscopy (FastSTM) can be used to investigate such dynamical behavior of individual clusters on the example of Pdn (1<=n<=19) on a hexagonal boron nitride nanomesh on Rh(111), in particular pertaining to minority species and rare events. By tuning the cluster size and varying the temperature to match the dynamics to the FastSTM frame rate, we followed steady state diffusion of clusters and atoms inside the nanomesh pore and reversible cluster isomerization in situ. While atoms diffuse along the rim of a pore, a small cluster experiences a corrugation in the potential energy landscape and jumps between six sites around the center of the pore. The atom and cluster diffusion between pores is strongly influenced by defects.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
The new FAST module: a portable and transparent add-on module for time-resolved investigations with commercial scanning probe microscopes
Authors:
Carlo Dri,
Mirco Panighel,
Daniel Tiemann,
Laerte L. Patera,
Giulia Troiano,
Yves Fukamori,
Fabian Knoller,
Barbara A. J. Lechner,
Giuseppe Cautero,
Dario Giuressi,
Giovanni Comelli,
Jordi Fraxedas,
Cristina Africh,
Friedrich Esch
Abstract:
Time resolution is one of the most severe limitations of scanning probe microscopies (SPMs), since the typical image acquisition times are in the order of several seconds or even few minutes. As a consequence, the characterization of dynamical processes occurring at surfaces (e.g. surface diffusion, film growth, self-assembly and chemical reactions) cannot be thoroughly addressed by conventional S…
▽ More
Time resolution is one of the most severe limitations of scanning probe microscopies (SPMs), since the typical image acquisition times are in the order of several seconds or even few minutes. As a consequence, the characterization of dynamical processes occurring at surfaces (e.g. surface diffusion, film growth, self-assembly and chemical reactions) cannot be thoroughly addressed by conventional SPMs. To overcome this limitation, several years ago we developed a first prototype of the FAST module, an add-on instrument capable of driving a commercial scanning tunneling microscope (STM) at and beyond video rate frequencies. Here we report on a fully redesigned version of the FAST module, featuring improved performance and user experience, which can be used both with STMs and atomic force microscopes (AFMs), and offers additional capabilities such as an atom tracking mode. All the new features of the FAST module, including portability between different commercial instruments, are described in detail and practically demonstrated.
△ Less
Submitted 21 June, 2019; v1 submitted 20 June, 2019;
originally announced June 2019.
-
Full Scale Proton Beam Impact Testing of new CERN Collimators and Validation of a Numerical Approach for Future Operation
Authors:
M. Bergeret,
F-X. Nuiry,
M. Calviani,
M. A. Fraser,
M. Butcher,
L-M. Grec,
L. Gentini,
A. Lechner,
M. Frankl,
V. Rizzoglio,
S. Burger,
A. Cherif
Abstract:
New collimators are being produced at CERN in the framework of a large particle accelerator upgrade project to protect beam lines against stray particles. Their movable jaws hold low density absorbers with tight geometric requirements, while being able to withstand direct proton beam impacts. Such events induce considerable thermo-mechanical loads, leading to complex structural responses, which ma…
▽ More
New collimators are being produced at CERN in the framework of a large particle accelerator upgrade project to protect beam lines against stray particles. Their movable jaws hold low density absorbers with tight geometric requirements, while being able to withstand direct proton beam impacts. Such events induce considerable thermo-mechanical loads, leading to complex structural responses, which make the numerical analysis challenging. Hence, an experiment has been developed to validate the jaw design under representative conditions and to acquire online results to enhance the numerical models. Two jaws have been impacted by high-intensity proton beams in a dedicated facility at CERN and have recreated the worst possible scenario in future operation. The analysis of online results coupled to post-irradiation examinations have demonstrated that the jaw response remains in the elastic domain. However, they have also highlighted how sensitive the jaw geometry is to its mounting support inside the collimator. Proton beam impacts, as well as handling activities, may alter the jaw flatness tolerance value by $\pm$ 70 $μ$m, whereas the flatness tolerance requirement is 200 $μ$m. In spite of having validated the jaw design for this application, the study points out numerical limitations caused by the difficulties in describing complex geometries and boundary conditions with such unprecedented requirements.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Energy Deposition and Radiation to Electronics
Authors:
A. Bignami,
F. Broggi,
M. Brugger,
F. Cerutti,
L. S. Esposito,
A. Lechner,
N. V. Mokhov,
I. L. Rakhno,
C. Santini,
E. Skordis,
I. S. Tropin
Abstract:
Chapter 10 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme tempe…
▽ More
Chapter 10 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Injection and Dumping Systems
Authors:
B. Goddard,
A. Lechner,
J. Uythoven
Abstract:
Chapter 14 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme tempe…
▽ More
Chapter 14 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Collimation System
Authors:
R. B. Appleby,
R. Barlow,
A. Bertarelli,
R. Bruce,
F. Carra,
F. Cerutti,
L. Esposito,
A. Faus-Golfe,
H. Garcia Morales,
L. Gentini,
S. M. Gibson,
P. Gradassi,
J. M. Jowett,
R. Kwee-Hinzmann,
L. Lari,
A. Lechner,
T. Markiewicz,
A. Marsili,
J. Molson,
L. J. Nevay,
E. Quaranta,
H. Rafique,
S. Redaelli,
M. Serluca,
E. Skordis
, et al. (3 additional authors not shown)
Abstract:
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Model Checking Flat Freeze LTL on One-Counter Automata
Authors:
Antonia Lechner,
Richard Mayr,
Joël Ouaknine,
Amaury Pouly,
James Worrell
Abstract:
Freeze LTL is a temporal logic with registers that is suitable for specifying properties of data words. In this paper we study the model checking problem for Freeze LTL on one-counter automata. This problem is known to be undecidable in general and PSPACE-complete for the special case of deterministic one-counter automata. Several years ago, Demri and Sangnier investigated the model checking probl…
▽ More
Freeze LTL is a temporal logic with registers that is suitable for specifying properties of data words. In this paper we study the model checking problem for Freeze LTL on one-counter automata. This problem is known to be undecidable in general and PSPACE-complete for the special case of deterministic one-counter automata. Several years ago, Demri and Sangnier investigated the model checking problem for the flat fragment of Freeze LTL on several classes of counter automata and posed the decidability of model checking flat Freeze LTL on one-counter automata as an open problem. In this paper we resolve this problem positively, utilising a known reduction to a reachability problem on one-counter automata with parameterised equality and disequality tests. Our main technical contribution is to show decidability of the latter problem by translation to Presburger arithmetic.
△ Less
Submitted 6 December, 2018; v1 submitted 8 June, 2016;
originally announced June 2016.
-
Energy deposition studies for the High-Luminosity Large Hadron Collider inner triplet magnets
Authors:
N. V. Mokhov,
I. L. Rakhno,
I. S. Tropin,
F. Cerutti,
L. S. Esposito,
A. Lechner
Abstract:
A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3…
▽ More
A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3000 fb-1, the peak dose in the innermost magnet insulator ranges from 20 to 35 MGy. Dynamic heat loads to the triplet magnet cold mass are calculated to evaluate the cryogenic capability. In general, FLUKA and MARS results are in a very good agreement.
△ Less
Submitted 2 April, 2015;
originally announced April 2015.
-
Testing Beam-Induced Quench Levels of LHC Superconducting Magnets
Authors:
B. Auchmann,
T. Baer,
M. Bednarek,
G. Bellodi,
C. Bracco,
R. Bruce,
F. Cerutti,
V. Chetvertkova,
B. Dehning,
P. P. Granieri,
W. Hofle,
E. B. Holzer,
A. Lechner,
E. Nebot Del Busto,
A. Priebe,
S. Redaelli,
B. Salvachua,
M. Sapinski,
R. Schmidt,
N. Shetty,
E. Skordis,
M. Solfaroli,
J. Steckert,
D. Valuch,
A. Verweij
, et al. (3 additional authors not shown)
Abstract:
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not…
▽ More
In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced accordingly. To date only seventeen beam-induced quenches have occurred; eight of them during specially designed quench tests, the others during injection. There has not been a single beam- induced quench during normal collider operation with stored beam. The conditions, however, are expected to become much more challenging after the long LHC shutdown. The magnets will be operating at near nominal currents, and in the presence of high energy and high intensity beams with a stored energy of up to 362 MJ per beam. In this paper we summarize our efforts to understand the quench levels of LHC superconducting magnets. We describe beam-loss events and dedicated experiments with beam, as well as the simulation methods used to reproduce the observable signals. The simulated energy deposition in the coils is compared to the quench levels predicted by electro-thermal models, thus allowing to validate and improve the models which are used to set beam-dump thresholds on beam-loss monitors for Run 2.
△ Less
Submitted 26 June, 2015; v1 submitted 18 February, 2015;
originally announced February 2015.
-
Energy Deposition Studies for the Hi-Lumi LHC Inner Triplet Magnets
Authors:
N. V. Mokhov,
I. L. Rakhno,
S. I. Striganov,
I. S. Tropin,
F. Cerutti,
L. Esposito,
A. Lechner
Abstract:
A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3…
▽ More
A detailed model of the High Luminosity LHC inner triplet region with new large-aperture Nb3Sn magnets, field maps, corrector packages, and segmented tungsten inner absorbers was built and implemented into the FLUKA and MARS15 codes. In the optimized configuration, the peak power density averaged over the magnet inner cable width is safely below the quench limit. For the integrated luminosity of 3000 fb -1, the peak dose in the innermost magnet insulator ranges from 20 to 35 MGy. Dynamic heat loads to the triplet magnet cold mass are calculated to evaluate the cryogenic capability. In general, FLUKA and MARS results are in a very good agreement.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Atomic scale friction of molecular adsorbates during diffusion
Authors:
B. A. J. Lechner,
A. S. de Wijn,
H. Hedgeland,
A. P. Jardine,
B. J. Hinch,
W. Allison,
J. Ellis
Abstract:
Experimental observations suggest that molecular adsorbates exhibit a larger friction coefficient than atomic species of comparable mass, yet the origin of this increased friction is not well understood. We present a study of the microscopic origins of friction experienced by molecular adsorbates during surface diffusion. Helium spin-echo measurements of a range of five-membered aromatic molecules…
▽ More
Experimental observations suggest that molecular adsorbates exhibit a larger friction coefficient than atomic species of comparable mass, yet the origin of this increased friction is not well understood. We present a study of the microscopic origins of friction experienced by molecular adsorbates during surface diffusion. Helium spin-echo measurements of a range of five-membered aromatic molecules, cyclopentadienyl (Cp), pyrrole and thiophene, on a copper(111) surface are compared with molecular dynamics simulations of the respective systems. The adsorbates have different chemical interactions with the surface and differ in bonding geometry, yet the measurements show that the friction is greater than 2 ps$^{-1}$ for all these molecules. We demonstrate that the internal and external degrees of freedom of these adsorbate species are a key factor in the underlying microscopic processes and identify the rotation modes as the ones contributing most to the total measured friction coefficient.
△ Less
Submitted 21 May, 2013;
originally announced May 2013.
-
Epistemic and systematic uncertainties in Monte Carlo simulation: an investigation in proton Bragg peak simulation
Authors:
Maria Grazia Pia,
Marcia Begalli,
Anton Lechner,
Lina Quintieri,
Paolo Saracco
Abstract:
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements…
▽ More
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements for experimental measurements capable of reducing epistemic uncertainties in the physics models.
△ Less
Submitted 15 December, 2010;
originally announced December 2010.
-
Quantifying the Unknown
Authors:
Maria Grazia Pia,
Matej Batič,
Marcia Begalli,
Anton Lechner,
Lina Quintieri,
Paolo Saracco
Abstract:
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements…
▽ More
The issue of how epistemic uncertainties affect the outcome of Monte Carlo simulation is discussed by means of a concrete use case: the simulation of the longitudinal energy deposition profile of low energy protons. A variety of electromagnetic and hadronic physics models is investigated, and their effects are analyzed. Possible systematic effects are highlighted. The results identify requirements for experimental measurements capable of reducing epistemic uncertainties in the simulation.
△ Less
Submitted 15 December, 2010; v1 submitted 3 December, 2010;
originally announced December 2010.
-
Physics-related epistemic uncertainties in proton depth dose simulation
Authors:
Maria Grazia Pia,
Marcia Begalli,
Anton Lechner,
Lina Quintieri,
Paolo Saracco
Abstract:
A set of physics models and parameters pertaining to the simulation of proton energy deposition in matter are evaluated in the energy range up to approximately 65 MeV, based on their implementations in the Geant4 toolkit. The analysis assesses several features of the models and the impact of their associated epistemic uncertainties, i.e. uncertainties due to lack of knowledge, on the simulation re…
▽ More
A set of physics models and parameters pertaining to the simulation of proton energy deposition in matter are evaluated in the energy range up to approximately 65 MeV, based on their implementations in the Geant4 toolkit. The analysis assesses several features of the models and the impact of their associated epistemic uncertainties, i.e. uncertainties due to lack of knowledge, on the simulation results. Possible systematic effects deriving from uncertainties of this kind are highlighted; their relevance in relation to the application environment and different experimental requirements are discussed, with emphasis on the simulation of radiotherapy set-ups. By documenting quantitatively the features of a wide set of simulation models and the related intrinsic uncertainties affecting the simulation results, this analysis provides guidance regarding the use of the concerned simulation tools in experimental applications; it also provides indications for further experimental measurements addressing the sources of such uncertainties.
△ Less
Submitted 13 July, 2010;
originally announced July 2010.