-
The MAGPI survey: The interdependence of mass, star formation rate, and metallicity in galaxies at z~0.3
Authors:
M. Koller,
B. Ziegler,
B. I. Ciocan,
S. Thater,
J. T. Mendel,
E. Wisnioski,
A. J. Battisti,
K. E. Harborne,
C. Foster,
C. Lagos,
S. M. Croom,
K. Grasha,
P. Papaderos,
R. S. Remus,
G. Sharma,
S. M. Sweet,
L. M. Valenzuela,
G. van de Ven,
T. Zafar
Abstract:
Star formation rates (SFRs), gas-phase metallicities, and stellar masses are crucial for studying galaxy evolution. The different relations resulting from these properties give insights into the complex interplay of gas inside galaxies and their evolutionary trajectory and current characteristics. We aim to characterize these relations at $z\sim 0.3$, corresponding to a 3-4 Gyr lookback time. We u…
▽ More
Star formation rates (SFRs), gas-phase metallicities, and stellar masses are crucial for studying galaxy evolution. The different relations resulting from these properties give insights into the complex interplay of gas inside galaxies and their evolutionary trajectory and current characteristics. We aim to characterize these relations at $z\sim 0.3$, corresponding to a 3-4 Gyr lookback time. We utilize optical integral field spectroscopy of 65 emission-line galaxies from the MAGPI survey at a redshift of $0.28<z<0.35$ and spanning a total stellar mass range of $8.2<\log(M_{*}/M_{\odot}) < 11.4$. We derive the resolved star formation main sequence (rSFMS), resolved mass metallicity relation (rMZR), and resolved fundamental metallicity relation (rFMR) at $z\sim 0.3$. We find a relatively shallow rSFMS slope of $\sim 0.425 \pm 0.014$ compared to the expected slope at this redshift for an ordinary least square (OLS) fitting routine. For an orthogonal distance regression (ODR) routine, a much steeper slope of $\sim 1.162 \pm 0.022$ is measured. We confirm the existence of an rMZR at $z\sim 0.3$ with an average metallicity located $\sim 0.03$ dex above the local Universe's metallicity. Via Partial Correlation Coefficients, evidence is found that the local metallicity is predominantly determined by the stellar mass surface density and has a weak secondary (inverse) dependence on the SFR surface density $Σ_{SFR}$. Additionally, a significant dependence of the local metallicity on the total stellar mass $M_{*}$ is found. Furthermore, we find that the stellar mass surface density $Σ_{*}$ and $M_{*}$ have a significant influence in determining the strength with which $Σ_{SFR}$ correlates with the local metallicity. We observe that at lower stellar masses, there is a tighter correlation between $Σ_{SFR}$ and the gas-phase metallicity, resulting in a more pronounced rFMR.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Scanning acoustic microscopy characterization of cold sprayed coatings deposited on grooved substrates
Authors:
Martin Koller,
Jan Cizek,
Michaela Janovská,
Martin Ševčík,
Jan Kondas,
Reeti Singh,
Hanuš Seiner
Abstract:
The effect of non-planar substrate surface on homogeneity and quality of cold sprayed (CS) deposits was studied by scanning acoustic microscopy (SAM). Fe coatings were cold sprayed onto Al substrates containing artificially introduced grooves of square- and trapezoid-shaped geometries, with flat or cylindrical bottoms. The Al substrates were either wrought or cold sprayed, to comprehend their pros…
▽ More
The effect of non-planar substrate surface on homogeneity and quality of cold sprayed (CS) deposits was studied by scanning acoustic microscopy (SAM). Fe coatings were cold sprayed onto Al substrates containing artificially introduced grooves of square- and trapezoid-shaped geometries, with flat or cylindrical bottoms. The Al substrates were either wrought or cold sprayed, to comprehend their prospective influence on the Fe coatings build-up. SAM was then used to assess morphological properties of the materials from the cross-view and top-view directions. The microstructure below the surface of the studied samples was visualized by measuring the amplitudes of the reflection echoes and the velocity of the ultrasonic waves. The SAM analysis revealed that the regions of coating imperfections around the grooves are larger than what is suggested by standard scanning electron microscopy (SEM) observations. Furthermore, we found that the seemingly non-influenced coating regions that appear perfectly homogeneous and dense in SEM do, in fact, possess heterogeneous microstructure associated with the individual CS nozzle passes.
△ Less
Submitted 11 July, 2024; v1 submitted 28 June, 2024;
originally announced June 2024.
-
confintROB Package: Confindence Intervals in robust linear mixed models
Authors:
Fabio Mason,
Manuel Koller,
Eva Cantoni,
Paolo Ghisletta
Abstract:
Statistical inference is a major scientific endeavor for many researchers. In terms of inferential methods implemented to mixed-effects models, significant progress has been made in the R software. However, these advances primarily concern classical estimators (ML, REML) and mainly focus on fixed effects. In the confintROB package, we have implemented various bootstrap methods for computing confid…
▽ More
Statistical inference is a major scientific endeavor for many researchers. In terms of inferential methods implemented to mixed-effects models, significant progress has been made in the R software. However, these advances primarily concern classical estimators (ML, REML) and mainly focus on fixed effects. In the confintROB package, we have implemented various bootstrap methods for computing confidence intervals (CIs) not only for fixed effects but also for variance components. These methods can be implemented with the widely used lmer function from the lme4 package, as well as with the rlmer function from the robustlmm package and the varComprob function from the robustvarComp package. These functions implement robust estimation methods suitable for data with outliers. The confintROB package implements the Wald method for fixed effects, whereas for both fixed effects and variance components, two bootstrap methods are implemented: the parametric bootstrap and the wild bootstrap. Moreover, the confintROB package can obtain both the percentile and the bias-corrected accelerated versions of CIs.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Chemically reactive thin films: dynamics and stability
Authors:
Tilman Richter,
Paolo Malgaretti,
Thomas M. Koller,
Jens Harting
Abstract:
Catalyst particles or complexes suspended in liquid films can trigger chemical reactions leading to inhomogeneous concentrations of reactants and products in the film. We demonstrate that the sensitivity of the liquid film's gas-liquid surface tension to these inhomogeneous concentrations strongly impacts the film stability. Using linear stability analysis, we identify novel scenarios in which the…
▽ More
Catalyst particles or complexes suspended in liquid films can trigger chemical reactions leading to inhomogeneous concentrations of reactants and products in the film. We demonstrate that the sensitivity of the liquid film's gas-liquid surface tension to these inhomogeneous concentrations strongly impacts the film stability. Using linear stability analysis, we identify novel scenarios in which the film can be either stabilized or destabilized by the reactions. Furthermore, we find so far unrevealed rupture mechanisms which are absent in the chemically inactive case. The linear stability predictions are confirmed by numerical simulations, which also demonstrate that the shape of chemically active droplets can depart from the spherical cap and that unsteady states such as traveling and standing waves might appear. Finally, we critically discuss the relevance of our predictions by showing that the range of our selected parameters is well accessible by typical experiments.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
The Radcliffe Wave is Oscillating
Authors:
Ralf Konietzka,
Alyssa A. Goodman,
Catherine Zucker,
Andreas Burkert,
João Alves,
Michael Foley,
Cameren Swiggum,
Maria Koller,
Núria Miret-Roig
Abstract:
Our Sun lies within 300 pc of the 2.7-kpc-long sinusoidal chain of dense gas clouds known as the Radcliffe Wave. The structure's wave-like shape was discovered using 3D dust mapping, but initial kinematic searches for oscillatory motion were inconclusive. Here we present evidence that the Radcliffe Wave is oscillating through the Galactic plane while also drifting radially away from the Galactic C…
▽ More
Our Sun lies within 300 pc of the 2.7-kpc-long sinusoidal chain of dense gas clouds known as the Radcliffe Wave. The structure's wave-like shape was discovered using 3D dust mapping, but initial kinematic searches for oscillatory motion were inconclusive. Here we present evidence that the Radcliffe Wave is oscillating through the Galactic plane while also drifting radially away from the Galactic Center. We use measurements of line-of-sight velocity for 12CO and 3D velocities of young stellar clusters to show that the most massive star-forming regions spatially associated with the Radcliffe Wave (including Orion, Cepheus, North America, and Cygnus X) move as if they are part of an oscillating wave driven by the gravitational acceleration of the Galactic potential. By treating the Radcliffe Wave as a coherently oscillating structure, we can derive its motion independently of the local Galactic mass distribution, and directly measure local properties of the Galactic potential as well as the Sun's vertical oscillation period. In addition, the measured drift of the Radcliffe Wave radially outward from the Galactic Center suggests that the cluster whose supernovae ultimately created today's expanding Local Bubble may have been born in the Radcliffe Wave.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Renormalons and power corrections in pseudo- and quasi-GPDs
Authors:
Vladimir Braun,
Maria Koller,
Jakob Schoenleber
Abstract:
High-order behavior of the perturbative expansion for short-distance observables in QCD is intimately related to the contributions of small momenta in the corresponding Feynman diagrams and this correspondence provides one with a useful tool to investigate power-suppressed nonperturbative corrections. We use this technique to study the structure of power corrections to parton quasi- and pseudo-GPD…
▽ More
High-order behavior of the perturbative expansion for short-distance observables in QCD is intimately related to the contributions of small momenta in the corresponding Feynman diagrams and this correspondence provides one with a useful tool to investigate power-suppressed nonperturbative corrections. We use this technique to study the structure of power corrections to parton quasi- and pseudo-GPDs which are used in lattice calculations of generalized parton distributions. As the main result, we predict the functional dependence of the leading power corrections to quasi(pseudo)-GPDs on $x$ variable for nonzero skewedness parameter $ξ$. The kinematic point $x=\pmξ$ turns out to be special. We find that the nonperturbative corrections to quasi-GPDs at this point are suppressed by the first power of the hard scale only. These contributions come from soft momenta and have nothing to do with the known UV renormalon in the Wilson line. We also show that power corrections can be strongly suppressed by the normalization procedure.
△ Less
Submitted 17 May, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
A Versatile Low-Complexity Feedback Scheme for FDD Systems via Generative Modeling
Authors:
Nurettin Turan,
Benedikt Fesl,
Michael Koller,
Michael Joham,
Wolfgang Utschick
Abstract:
We propose a versatile feedback scheme for both single- and multi-user multiple-input multiple-output (MIMO) frequency division duplex (FDD) systems. Particularly, we propose utilizing a Gaussian mixture model (GMM) with a reduced number of parameters for codebook construction, feedback encoding, and precoder design. The GMM is fitted offline at the base station (BS) to uplink training samples to…
▽ More
We propose a versatile feedback scheme for both single- and multi-user multiple-input multiple-output (MIMO) frequency division duplex (FDD) systems. Particularly, we propose utilizing a Gaussian mixture model (GMM) with a reduced number of parameters for codebook construction, feedback encoding, and precoder design. The GMM is fitted offline at the base station (BS) to uplink training samples to approximate the channel distribution of all possible mobile terminals (MTs) within the BS cell. Subsequently, a codebook is constructed, with each element based on one GMM component. Extracting directional information from the codebook or exploiting the GMM's sample generation ability facilitates joint precoder design for a multi-user MIMO system using state-of-the-art precoding algorithms. After offloading the GMM to the MTs, they can easily determine their feedback by selecting the index of the GMM component with the highest responsibility for their received pilot signal. This strategy exhibits low complexity and supports parallelization. Simulations demonstrate that the proposed approach outperforms conventional methods, which either estimate the channel and utilize a Lloyd codebook or use a deep neural network to determine the feedback in terms of spectral efficiency or sum-rate. The performance gains can be exploited to deploy systems with fewer pilots or feedback bits.
△ Less
Submitted 28 November, 2023; v1 submitted 27 April, 2023;
originally announced April 2023.
-
On the Mean Square Error Optimal Estimator in One-Bit Quantized Systems
Authors:
Benedikt Fesl,
Michael Koller,
Wolfgang Utschick
Abstract:
This paper investigates the mean square error (MSE)-optimal conditional mean estimator (CME) in one-bit quantized systems in the context of channel estimation with jointly Gaussian inputs. We analyze the relationship of the generally nonlinear CME to the linear Bussgang estimator, a well-known method based on Bussgang's theorem. We highlight a novel observation that the Bussgang estimator is equal…
▽ More
This paper investigates the mean square error (MSE)-optimal conditional mean estimator (CME) in one-bit quantized systems in the context of channel estimation with jointly Gaussian inputs. We analyze the relationship of the generally nonlinear CME to the linear Bussgang estimator, a well-known method based on Bussgang's theorem. We highlight a novel observation that the Bussgang estimator is equal to the CME for different special cases, including the case of univariate Gaussian inputs and the case of multiple pilot signals in the absence of additive noise prior to the quantization. For the general cases we conduct numerical simulations to quantify the gap between the Bussgang estimator and the CME. This gap increases for higher dimensions and longer pilot sequences. We propose an optimal pilot sequence, motivated by insights from the CME, and derive a novel closed-form expression of the MSE for that case. Afterwards, we find a closed-form limit of the MSE in the asymptotically large number of pilots regime that also holds for the Bussgang estimator. Lastly, we present numerical experiments for various system parameters and for different performance metrics which illuminate the behavior of the optimal channel estimator in the quantized regime. In this context, the well-known stochastic resonance effect that appears in quantized systems can be quantified.
△ Less
Submitted 27 April, 2023; v1 submitted 8 December, 2022;
originally announced December 2022.
-
Evaluation of a Gaussian Mixture Model-based Channel Estimator using Measurement Data
Authors:
Nurettin Turan,
Benedikt Fesl,
Moritz Grundei,
Michael Koller,
Wolfgang Utschick
Abstract:
In this work, we use real-world data in order to evaluate and validate a machine learning (ML)-based algorithm for physical layer functionalities. Specifically, we apply a recently introduced Gaussian mixture model (GMM)-based algorithm in order to estimate uplink channels stemming from a measurement campaign. For this estimator, there is an initial (offline) training phase, where a GMM is fitted…
▽ More
In this work, we use real-world data in order to evaluate and validate a machine learning (ML)-based algorithm for physical layer functionalities. Specifically, we apply a recently introduced Gaussian mixture model (GMM)-based algorithm in order to estimate uplink channels stemming from a measurement campaign. For this estimator, there is an initial (offline) training phase, where a GMM is fitted onto given channel (training) data. Thereafter, the fitted GMM is used for (online) channel estimation. Our experiments suggest that the GMM estimator learns the intrinsic characteristics of a given base station's whole radio propagation environment. Essentially, this ambient information is captured due to universal approximation properties of the initially fitted GMM. For a large enough number of GMM components, the GMM estimator was shown to approximate the (unknown) mean squared error (MSE)-optimal channel estimator arbitrarily well. In our experiments, the GMM estimator shows significant performance gains compared to approaches that are not able to capture the ambient information. To validate the claim that ambient information is learnt, we generate synthetic channel data using a state-of-the-art channel simulator and train the GMM estimator once on these and once on the real data, and we apply the estimator once to the synthetic and once to the real data. We then observe how providing suitable ambient information in the training phase beneficially impacts the later channel estimation performance.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
GMM-based Codebook Construction and Feedback Encoding in FDD Systems
Authors:
Nurettin Turan,
Michael Koller,
Benedikt Fesl,
Samer Bazzi,
Wen Xu,
Wolfgang Utschick
Abstract:
We propose a precoder codebook construction and feedback encoding scheme which is based on Gaussian mixture models (GMMs). In an offline phase, the base station (BS) first fits a GMM to uplink (UL) training samples. Thereafter, it designs a codebook in an unsupervised manner by exploiting the GMM's clustering capability. We design one codebook entry per GMM component. After offloading the GMM-but…
▽ More
We propose a precoder codebook construction and feedback encoding scheme which is based on Gaussian mixture models (GMMs). In an offline phase, the base station (BS) first fits a GMM to uplink (UL) training samples. Thereafter, it designs a codebook in an unsupervised manner by exploiting the GMM's clustering capability. We design one codebook entry per GMM component. After offloading the GMM-but not the codebook-to the mobile terminal (MT) in the online phase, the MT utilizes the GMM to determine the best fitting codebook entry. To this end, no channel estimation is necessary at the MT. Instead, the MT's observed signal is used to evaluate how responsible each component of the GMM is for the signal. The feedback consists of the index of the GMM component with the highest responsibility and the BS then employs the corresponding codebook entry. Simulation results show that the proposed codebook design and feedback encoding scheme outperforms conventional Lloyd clustering based codebook design algorithms, especially in configurations with reduced pilot overhead.
△ Less
Submitted 24 May, 2022;
originally announced May 2022.
-
Variational Autoencoder Leveraged MMSE Channel Estimation
Authors:
Michael Baur,
Benedikt Fesl,
Michael Koller,
Wolfgang Utschick
Abstract:
We propose to utilize a variational autoencoder (VAE) for data-driven channel estimation. The underlying true and unknown channel distribution is modeled by the VAE as a conditional Gaussian distribution in a novel way, parameterized by the respective first and second order conditional moments. As a result, it can be observed that the linear minimum mean square error (LMMSE) estimator in its varia…
▽ More
We propose to utilize a variational autoencoder (VAE) for data-driven channel estimation. The underlying true and unknown channel distribution is modeled by the VAE as a conditional Gaussian distribution in a novel way, parameterized by the respective first and second order conditional moments. As a result, it can be observed that the linear minimum mean square error (LMMSE) estimator in its variant conditioned on the latent sample of the VAE approximates an optimal MSE estimator. Furthermore, we argue how a VAE-based channel estimator can approximate the MMSE channel estimator. We propose three variants of VAE estimators that differ in the data used during training and estimation. First, we show that given perfectly known channel state information at the input of the VAE during estimation, which is impractical, we obtain an estimator that can serve as a benchmark result for an estimation scenario. We then propose practically feasible approaches, where perfectly known channel state information is only necessary in the training phase or is not needed at all. Simulation results on 3GPP and QuaDRiGa channel data attest a small performance loss of the practical approaches and the superiority of our VAE approaches in comparison to other related channel estimation methods.
△ Less
Submitted 22 November, 2022; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Channel Estimation based on Gaussian Mixture Models with Structured Covariances
Authors:
Benedikt Fesl,
Michael Joham,
Sha Hu,
Michael Koller,
Nurettin Turan,
Wolfgang Utschick
Abstract:
In this work, we propose variations of a Gaussian mixture model (GMM) based channel estimator that was recently proven to be asymptotically optimal in the minimum mean square error (MMSE) sense. We account for the need of low computational complexity in the online estimation and low cost for training and storage in practical applications. To this end, we discuss modifications of the underlying exp…
▽ More
In this work, we propose variations of a Gaussian mixture model (GMM) based channel estimator that was recently proven to be asymptotically optimal in the minimum mean square error (MMSE) sense. We account for the need of low computational complexity in the online estimation and low cost for training and storage in practical applications. To this end, we discuss modifications of the underlying expectation-maximization (EM) algorithm, which is needed to fit the parameters of the GMM, to allow for structurally constrained covariances. Further, we investigate splitting the 2D time and frequency estimation problem in wideband systems into cascaded 1D estimations with the help of the GMM. The proposed cascaded GMM approach drastically reduces the complexity and memory requirements. We observe that due to the training on realistic channel data, the proposed GMM estimators seem to inherently perform a trade-off between saving complexity/parameters and estimation performance. We compare these low-complexity approaches to a practical and low cost method that relies on the power delay profile (PDP) and the Doppler spectrum (DS). We argue that, with the training on scenario-specific data from the environment, these practical baselines are outperformed by far with equal estimation complexity.
△ Less
Submitted 3 June, 2023; v1 submitted 7 May, 2022;
originally announced May 2022.
-
Electric-field-controlled cold dipolar collisions between trapped CH$_3$F molecules
Authors:
M. Koller,
F. Jung,
J. Phrompao,
M. Zeppenfeld,
I. M. Rabey,
G. Rempe
Abstract:
Reaching high densities is a key step towards cold-collision experiments with polyatomic molecules. We use a cryofuge to load up to 2$\times10^7$ CH$_3$F molecules into a box-like electric trap, achieving densities up to 10$^7$/cm$^3$ at temperatures around 350 mK where the elastic dipolar cross-section exceeds 7$\times$10$^{-12}$cm$^2$. We measure inelastic rate constants below 4$\times$10…
▽ More
Reaching high densities is a key step towards cold-collision experiments with polyatomic molecules. We use a cryofuge to load up to 2$\times10^7$ CH$_3$F molecules into a box-like electric trap, achieving densities up to 10$^7$/cm$^3$ at temperatures around 350 mK where the elastic dipolar cross-section exceeds 7$\times$10$^{-12}$cm$^2$. We measure inelastic rate constants below 4$\times$10$^{-8}$cm$^3$/s and control these by tuning a homogeneous electric field that covers a large fraction of the trap volume. Comparison to ab-initio calculations gives excellent agreement with dipolar relaxation. Our techniques and findings are generic and immediately relevant for other cold-molecule collision experiments.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
An Asymptotically MSE-Optimal Estimator based on Gaussian Mixture Models
Authors:
Michael Koller,
Benedikt Fesl,
Nurettin Turan,
Wolfgang Utschick
Abstract:
This paper investigates a channel estimator based on Gaussian mixture models (GMMs) in the context of linear inverse problems with additive Gaussian noise. We fit a GMM to given channel samples to obtain an analytic probability density function (PDF) which approximates the true channel PDF. Then, a conditional mean estimator (CME) corresponding to this approximating PDF is computed in closed form…
▽ More
This paper investigates a channel estimator based on Gaussian mixture models (GMMs) in the context of linear inverse problems with additive Gaussian noise. We fit a GMM to given channel samples to obtain an analytic probability density function (PDF) which approximates the true channel PDF. Then, a conditional mean estimator (CME) corresponding to this approximating PDF is computed in closed form and used as an approximation of the optimal CME based on the true channel PDF. This optimal CME cannot be calculated analytically because the true channel PDF is generally unknown. We present mild conditions which allow us to prove the convergence of the GMM-based CME to the optimal CME as the number of GMM components is increased. Additionally, we investigate the estimator's computational complexity and present simplifications based on common model-based insights. Further, we study the estimator's behavior in numerical experiments including multiple-input multiple-output (MIMO) and wideband systems.
△ Less
Submitted 20 July, 2022; v1 submitted 23 December, 2021;
originally announced December 2021.
-
An Asymptotically Optimal Approximation of the Conditional Mean Channel Estimator based on Gaussian Mixture Models
Authors:
Michael Koller,
Benedikt Fesl,
Nurettin Turan,
Wolfgang Utschick
Abstract:
This paper investigates a channel estimator based on Gaussian mixture models (GMMs). We fit a GMM to given channel samples to obtain an analytic probability density function (PDF) which approximates the true channel PDF. Then, a conditional mean channel estimator corresponding to this approximating PDF is computed in closed form and used as an approximation of the optimal conditional mean estimato…
▽ More
This paper investigates a channel estimator based on Gaussian mixture models (GMMs). We fit a GMM to given channel samples to obtain an analytic probability density function (PDF) which approximates the true channel PDF. Then, a conditional mean channel estimator corresponding to this approximating PDF is computed in closed form and used as an approximation of the optimal conditional mean estimator based on the true channel PDF. This optimal estimator cannot be calculated analytically because the true channel PDF is generally not available. To motivate the GMM-based estimator, we show that it converges to the optimal conditional mean estimator as the number of GMM components is increased. In numerical experiments, a reasonable number of GMM components already shows promising estimation results.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
CSI Clustering with Variational Autoencoding
Authors:
Michael Baur,
Michael Würth,
Michael Koller,
Vlad-Costin Andrei,
Wolfgang Utschick
Abstract:
The model order of a wireless channel plays an important role for a variety of applications in communications engineering, e.g., it represents the number of resolvable incident wavefronts with non-negligible power incident from a transmitter to a receiver. Areas such as direction of arrival estimation leverage the model order to analyze the multipath components of channel state information. In thi…
▽ More
The model order of a wireless channel plays an important role for a variety of applications in communications engineering, e.g., it represents the number of resolvable incident wavefronts with non-negligible power incident from a transmitter to a receiver. Areas such as direction of arrival estimation leverage the model order to analyze the multipath components of channel state information. In this work, we propose to use a variational autoencoder to group unlabeled channel state information with respect to the model order in the variational autoencoder latent space in an unsupervised manner. We validate our approach with simulated 3GPP channel data. Our results suggest that, in order to learn an appropriate clustering, it is crucial to use a more flexible likelihood model for the variational autoencoder decoder than it is usually the case in standard applications.
△ Less
Submitted 27 October, 2022; v1 submitted 18 November, 2021;
originally announced November 2021.
-
Learning a Compressive Sensing Matrix with Structural Constraints via Maximum Mean Discrepancy Optimization
Authors:
Michael Koller,
Wolfgang Utschick
Abstract:
We introduce a learning-based algorithm to obtain a measurement matrix for compressive sensing related recovery problems. The focus lies on matrices with a constant modulus constraint which typically represent a network of analog phase shifters in hybrid precoding/combining architectures. We interpret a matrix with restricted isometry property as a mapping of points from a high- to a low-dimension…
▽ More
We introduce a learning-based algorithm to obtain a measurement matrix for compressive sensing related recovery problems. The focus lies on matrices with a constant modulus constraint which typically represent a network of analog phase shifters in hybrid precoding/combining architectures. We interpret a matrix with restricted isometry property as a mapping of points from a high- to a low-dimensional hypersphere. We argue that points on the low-dimensional hypersphere, namely, in the range of the matrix, should be uniformly distributed to increase robustness against measurement noise. This notion is formalized in an optimization problem which uses one of the maximum mean discrepancy metrics in the objective function. Recent success of such metrics in neural network related topics motivate a solution of the problem based on machine learning. Numerical experiments show better performance than random measurement matrices that are generally employed in compressive sensing contexts. Further, we adapt a method from the literature to the constant modulus constraint. This method can also compete with random matrices and it is shown to harmonize well with the proposed learning-based approach if it is used as an initialization. Lastly, we describe how other structural matrix constraints, e.g., a Toeplitz constraint, can be taken into account, too.
△ Less
Submitted 14 October, 2021;
originally announced October 2021.
-
Copper and silver thin film systems display differences in antiviral and antibacterial properties -- implications for the prevention of SARS-CoV-2 infections
Authors:
Toni Luise Meister,
Jill Fortmann,
Marina Breisch,
Christina Sengstock,
Eike Steinmann,
Manfred Koeller,
Stephanie Pfaender,
Alfred Ludwig
Abstract:
The current Coronavirus Disease 19 (COVID-19) pandemic has exemplified the need for simple and efficient prevention strategies that can be rapidly implemented to mitigate infection risks. Various surfaces have a long history of antimicrobial properties and are well described for the prevention of bacterial infections. However, their effect on many viruses has not been studied in depth. In the cont…
▽ More
The current Coronavirus Disease 19 (COVID-19) pandemic has exemplified the need for simple and efficient prevention strategies that can be rapidly implemented to mitigate infection risks. Various surfaces have a long history of antimicrobial properties and are well described for the prevention of bacterial infections. However, their effect on many viruses has not been studied in depth. In the context of COVID-19, several surfaces, including copper (Cu) and silver (Ag) coatings have been described as efficient antiviral measures that can easily be implemented to slow viral transmission. In this study, we detected antiviral properties against Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) on surfaces, which were coated with Cu by magnetron sputtering. However, no effect of Ag on viral titers was observed, in clear contrast to its well-known antibacterial properties. Further enhancement of Ag ion release kinetics based on an electrochemical sacrificial anode mechanism did not increase antiviral activity. These results clearly demonstrate that Cu and Ag thin film systems display significant differences in antiviral and antibacterial properties which need to be considered upon implementation.
△ Less
Submitted 22 June, 2021;
originally announced June 2021.
-
Centralized Learning of the Distributed Downlink Channel Estimators in FDD Systems using Uplink Data
Authors:
B. Fesl,
N. Turan,
M. Koller,
M. Joham,
W. Utschick
Abstract:
In this work, we propose a convolutional neural network (CNN) based low-complexity approach for downlink (DL) channel estimation (CE) in frequency division duplex (FDD) systems. In contrast to existing work, we use training data which solely stems from the uplink (UL) domain. This allows to learn the CNN centralized at the base station (BS). After training, the network parameters are offloaded to…
▽ More
In this work, we propose a convolutional neural network (CNN) based low-complexity approach for downlink (DL) channel estimation (CE) in frequency division duplex (FDD) systems. In contrast to existing work, we use training data which solely stems from the uplink (UL) domain. This allows to learn the CNN centralized at the base station (BS). After training, the network parameters are offloaded to mobile terminals (MTs) within the coverage area of the BS. The MTs can then obtain channel state information (CSI) of the MIMO channels with the low-complexity CNN estimator. This circumvents the necessity of an infeasible amount of feedback, i.e., acquisition of training data at the user, and the offline training phase at each MT. Numerical results show that the CNN which is trained solely based on UL data performs equally well as the network trained based on DL data. Furthermore, the approach is able to outperform state-of-the-art CE algorithms.
△ Less
Submitted 25 May, 2021; v1 submitted 22 May, 2021;
originally announced May 2021.
-
Unsupervised Learning of Adaptive Codebooks for Deep Feedback Encoding in FDD Systems
Authors:
Nurettin Turan,
Michael Koller,
Samer Bazzi,
Wen Xu,
Wolfgang Utschick
Abstract:
In this work, we propose a joint adaptive codebook construction and feedback generation scheme in frequency division duplex (FDD) systems. Both unsupervised and supervised deep learning techniques are used for this purpose. Based on a recently discovered equivalence of uplink (UL) and downlink (DL) channel state information (CSI) in terms of neural network learning, the codebook and associated dee…
▽ More
In this work, we propose a joint adaptive codebook construction and feedback generation scheme in frequency division duplex (FDD) systems. Both unsupervised and supervised deep learning techniques are used for this purpose. Based on a recently discovered equivalence of uplink (UL) and downlink (DL) channel state information (CSI) in terms of neural network learning, the codebook and associated deep encoder for feedback signaling is based on UL data only. Subsequently, the feedback encoder can be offloaded to the mobile terminals (MTs) to generate channel feedback there as efficiently as possible, without any training effort at the terminals or corresponding transfer of training and codebook data. Numerical simulations demonstrate the promising performance of the proposed method.
△ Less
Submitted 21 May, 2021; v1 submitted 19 May, 2021;
originally announced May 2021.
-
A Low-Complexity MIMO Channel Estimator with Implicit Structure of a Convolutional Neural Network
Authors:
B. Fesl,
N. Turan,
M. Koller,
W. Utschick
Abstract:
A low-complexity convolutional neural network estimator which learns the minimum mean squared error channel estimator for single-antenna users was recently proposed. We generalize the architecture to the estimation of MIMO channels with multiple-antenna users and incorporate complexity-reducing assumptions based on the channel model. Learning is used in this context to combat the mismatch between…
▽ More
A low-complexity convolutional neural network estimator which learns the minimum mean squared error channel estimator for single-antenna users was recently proposed. We generalize the architecture to the estimation of MIMO channels with multiple-antenna users and incorporate complexity-reducing assumptions based on the channel model. Learning is used in this context to combat the mismatch between the assumptions and real scenarios where the assumptions may not hold. We derive a high-level description of the estimator for arbitrary choices of the pilot sequence. It turns out that the proposed estimator has the implicit structure of a two-layered convolutional neural network, where the derived quantities can be relaxed to learnable parameters. We show that by using discrete Fourier transform based pilots the number of learnable network parameters decreases significantly and the online run time of the estimator is reduced considerably, where we can achieve linearithmic order of complexity in the number of antennas. Numerical results demonstrate performance gains compared to state-of-the-art algorithms from the field of compressive sensing or covariance estimation of the same or even higher computational complexity. The simulation code is available online.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
Risk-Averse Biased Human Policies in Assistive Multi-Armed Bandit Settings
Authors:
Michael Koller,
Timothy Patten,
Markus Vincze
Abstract:
Assistive multi-armed bandit problems can be used to model team situations between a human and an autonomous system like a domestic service robot. To account for human biases such as the risk-aversion described in the Cumulative Prospect Theory, the setting is expanded to using observable rewards. When robots leverage knowledge about the risk-averse human model they eliminate the bias and make mor…
▽ More
Assistive multi-armed bandit problems can be used to model team situations between a human and an autonomous system like a domestic service robot. To account for human biases such as the risk-aversion described in the Cumulative Prospect Theory, the setting is expanded to using observable rewards. When robots leverage knowledge about the risk-averse human model they eliminate the bias and make more rational choices. We present an algorithm that increases the utility value of such human-robot teams. A brief evaluation indicates that arbitrary reward functions can be handled.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Buffer-gas cooling of molecules in the low-density regime: Comparison between simulation and experiment
Authors:
Thomas Gantner,
Manuel Koller,
Xing Wu,
Gerhard Rempe,
Martin Zeppenfeld
Abstract:
Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities.…
▽ More
Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities. Here, we present a numerical approach based on a trajectory analysis, with molecules performing a random walk in the cell due to collisions with a homogeneous buffer gas. This method can reproduce experimental flux and velocity distributions of molecules emerging from the buffer gas cell for varying buffer gas densities. This includes the strong decrease in molecule output from the cell for increasing buffer gas density and the so-called boosting effect, when molecules are accelerated by buffer-gas atoms after leaving the cell. The simulations provide various insights which could substantially improve buffer-gas cell design.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
Design of the Anatomically Correct, Biomechatronic Hand
Authors:
Benedek Jozsef Tasi,
Miklos Koller,
Gyorgy Cserey
Abstract:
Following the recent advances in the field of robotic hand development, it can be inferred that the greatest challenge lies in restoring not just general functionality, but the delicate dexterity of the human hand. Results from studying its movement kinematics and dynamics indicate that the intricate anatomical features and structural details are essential for producing such versatility. To addres…
▽ More
Following the recent advances in the field of robotic hand development, it can be inferred that the greatest challenge lies in restoring not just general functionality, but the delicate dexterity of the human hand. Results from studying its movement kinematics and dynamics indicate that the intricate anatomical features and structural details are essential for producing such versatility. To address this, we present the Anatomically Correct, Biomechatronic (ACB) Hand, by explaining the purpose and implementation of every functionally significant bone, ligament, finger-actuating intrinsic and extrinsic muscle, tendinous network and pulley system. We biomechanically validate our results using Landsmeers models, and demonstrate the hands performance by examining the execution of certain synergistic movements, analyzing fingertip trajectories, performing the Kapandji test, and realizing the GRASP taxonomy. This study aims to promote how anatomically accurate design considerations can assist in consequentially attaining more human-like functionality, while still allowing for robust structural elements towards advancing research in hand biomechanics, prosthetics and teleoperation.
△ Less
Submitted 17 September, 2019;
originally announced September 2019.
-
A Comparison of Prediction Algorithms and Nexting for Short Term Weather Forecasts
Authors:
Michael Koller,
Johannes Feldmaier,
Klaus Diepold
Abstract:
This report first provides a brief overview of a number of supervised learning algorithms for regression tasks. Among those are neural networks, regression trees, and the recently introduced Nexting. Nexting has been presented in the context of reinforcement learning where it was used to predict a large number of signals at different timescales. In the second half of this report, we apply the algo…
▽ More
This report first provides a brief overview of a number of supervised learning algorithms for regression tasks. Among those are neural networks, regression trees, and the recently introduced Nexting. Nexting has been presented in the context of reinforcement learning where it was used to predict a large number of signals at different timescales. In the second half of this report, we apply the algorithms to historical weather data in order to evaluate their suitability to forecast a local weather trend. Our experiments did not identify one clearly preferable method, but rather show that choosing an appropriate algorithm depends on the available side information. For slowly varying signals and a proficient number of training samples, Nexting achieved good results in the studied cases.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
High-entropy ceramic thin films; A case study on transition metal diborides
Authors:
Paul H. Mayrhofer,
Alexander Kirnbauer,
Philipp Ertelthaler,
Christian M. Koller
Abstract:
High-entropy materials often outperform their lower-entropy relatives in various aspects, such as thermal stability and fracture toughness. While there are extensive research activities in the field of high-entropy alloys, comparably little is performed for high-entropy ceramics, and especially for high-entropy diborides. Here we show, that not only the hardness of ZrB2 layers can be improved from…
▽ More
High-entropy materials often outperform their lower-entropy relatives in various aspects, such as thermal stability and fracture toughness. While there are extensive research activities in the field of high-entropy alloys, comparably little is performed for high-entropy ceramics, and especially for high-entropy diborides. Here we show, that not only the hardness of ZrB2 layers can be improved from 43.2 to 45.8 to 47.2 GPa through the formation of solid solution ternary diborides (Zr0.61Ti0.39B2) and high-entropy diborides (Zr0.23Ti0.20Hf0.19V0.14Ta0.24B2), respectively, but especially their thermal stability against structural rearrangements and decomposition towards the constituting binary diborides.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
A cryofuge for cold-collision experiments with slow polar molecules
Authors:
Xing Wu,
Thomas Gantner,
Manuel Koller,
Martin Zeppenfeld,
Sotir Chervenkov,
Gerhard Rempe
Abstract:
Ultracold molecules represent a fascinating research frontier in physics and chemistry, but it has proven challenging to prepare dense samples at low velocities. Here we present a solution to this goal by a non-conventional approach dubbed cryofuge. It employs centrifugal force to bring cryogenically cooled molecules to kinetic energies below $1\,$K$\times k_B$ in the laboratory frame, with corres…
▽ More
Ultracold molecules represent a fascinating research frontier in physics and chemistry, but it has proven challenging to prepare dense samples at low velocities. Here we present a solution to this goal by a non-conventional approach dubbed cryofuge. It employs centrifugal force to bring cryogenically cooled molecules to kinetic energies below $1\,$K$\times k_B$ in the laboratory frame, with corresponding fluxes exceeding $10^{10}$/s at velocities below $20\,$m/s. By attaining densities higher than $10^9$/cm$^3$ and interaction times longer than $25\,$ms in samples of fluoromethane as well as deuterated ammonia, we observe cold dipolar collisions between molecules and determine their collision cross sections.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
Non-linear two-photon resonance fluorescence on a single artificial atom
Authors:
P. -L. Ardelt,
M. Koller,
T. Simmet,
L. Hanschke,
A. Bechtold,
A. Regler,
J. Wierzbowski,
H. Riedl,
K. Müller,
J. J. Finley
Abstract:
We report two-photon resonance fluorescence of an individual semiconductor artificial atom. By non-linearly driving a single quantum dot via a two-photon transition, we probe the linewidth of the two-photon processes and show that, similar to their single-photon counterparts, they are close to being Fourier limited at low temperatures. The evolution of the population of excitonic states with the R…
▽ More
We report two-photon resonance fluorescence of an individual semiconductor artificial atom. By non-linearly driving a single quantum dot via a two-photon transition, we probe the linewidth of the two-photon processes and show that, similar to their single-photon counterparts, they are close to being Fourier limited at low temperatures. The evolution of the population of excitonic states with the Rabi frequency exhibits a clear s-shaped behavior, indicative of the non-linear response via the two-photon excitation process. We model the non-linear response using a 4-level atomic system representing the manifold of excitonic and biexcitonic states of the quantum dot and show that quantitative agreement is obtained only by including the interaction with LA-phonons in the solid state environment. Finally, we demonstrate the formation of dressed states emerging from a two-photon interaction between the artificial atom and the excitation field. The non-linear optical dressing induces a mixing of all four excitonic states that facilitates the tuning of the polarization selection rules of the artificial atom.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Empirical Features of Spontaneous and Induced Traffic Breakdowns in Free Flow at Highway Bottlenecks
Authors:
Boris S. Kerner,
Micha Koller,
Sergey L. Klenov,
Hubert Rehborn,
Michael Leibel
Abstract:
Based on an empirical study of real field traffic data measured in 1996--2014 through road detectors installed on German freeways, we reveal physical features of empirical nuclei for spontaneous traffic breakdown in free flow at highway bottlenecks. It is shown that the source of a nucleus for traffic breakdown is the solely difference between empirical spontaneous and induced traffic breakdowns a…
▽ More
Based on an empirical study of real field traffic data measured in 1996--2014 through road detectors installed on German freeways, we reveal physical features of empirical nuclei for spontaneous traffic breakdown in free flow at highway bottlenecks. It is shown that the source of a nucleus for traffic breakdown is the solely difference between empirical spontaneous and induced traffic breakdowns at a highway bottleneck. Microscopic traffic simulations with a stochastic traffic flow model in the framework of three-phase theory explain the empirical findings. It turns out that in the most cases, a nucleus for empirical spontaneous traffic breakdown occurs through an interaction of one of waves in free flow with an empirical permanent speed disturbance localized at a highway bottleneck. The wave is a localized structure in free flow, in which the total flow rate is larger and the speed averaged across the highway is smaller than outside the wave. The waves in free flow appear due to oscilations in the percentage of slow vehicles; these waves propagate with the average speed of slow vehicles in free flow (about 85--88 km/h for German highways). Any of the waves exhibits a two-dimensional asymmetric spatiotemporal structure: Wave's characteristics are different in different highway lanes.
△ Less
Submitted 10 February, 2015;
originally announced February 2015.
-
Dissipative preparation of the exciton and biexciton in a self-assembled quantum dot on picosecond timescales
Authors:
Per-Lennart Ardelt,
Lukas Hanschke,
Kevin A. Fischer,
Kai Müller,
Alexander Kleinkauf,
Manuel Koller,
Alexander Bechtold,
Tobias Simmet,
Jakob Wierzbowski,
Hubert Riedl,
Gerhard Abstreiter,
Jonathan. J. Finley
Abstract:
Pulsed resonant fluorescence is used to probe ultrafast phonon-assisted exciton and biexciton preparation in individual self-assembled InGaAs quantum dots. By driving the system using large area ($\geq10π$) near resonant optical pulses, we experimentally demonstrate how phonon mediated dissipation within the manifold of dressed excitonic states can be used to prepare the neutral exciton with a fid…
▽ More
Pulsed resonant fluorescence is used to probe ultrafast phonon-assisted exciton and biexciton preparation in individual self-assembled InGaAs quantum dots. By driving the system using large area ($\geq10π$) near resonant optical pulses, we experimentally demonstrate how phonon mediated dissipation within the manifold of dressed excitonic states can be used to prepare the neutral exciton with a fidelity $\geq 70\%$. By comparing the phonon-assisted preparation with resonant Rabi oscillations we show that the phonon-mediated process provides the higher fidelity preparation for large pulse areas and is less sensitive to pulse area variations. Moreover, by detuning the laser with respect to the exciton transition we map out the spectral density for exciton coupling to the bulk LA-phonon continuum. Similar phonon mediated processes are shown to facilitate direct biexciton preparation via two photon biexciton absorption, with fidelities $>80\%$. Our results are found to be in very good quantitative agreement with simulations that model the quantum dot-phonon bath interactions with Bloch-Redfield theory.
△ Less
Submitted 21 September, 2014;
originally announced September 2014.
-
Rapid quantitative pharmacodynamic imaging by a novel method: theory, simulation testing and proof of principle
Authors:
Kevin J. Black,
Jonathan M. Koller,
Brad D. Miller
Abstract:
Pharmacological challenge imaging has mapped, but rarely quantified, the sensitivity of a biological system to a given drug. We describe a novel method called rapid quantitative pharmacodynamic imaging. This method combines pharmacokinetic-pharmacodynamic modeling, repeated small doses of a challenge drug over a short time scale, and functional imaging to rapidly provide quantitative estimates of…
▽ More
Pharmacological challenge imaging has mapped, but rarely quantified, the sensitivity of a biological system to a given drug. We describe a novel method called rapid quantitative pharmacodynamic imaging. This method combines pharmacokinetic-pharmacodynamic modeling, repeated small doses of a challenge drug over a short time scale, and functional imaging to rapidly provide quantitative estimates of drug sensitivity including EC50 (the concentration of drug that produces half the maximum possible effect). We first test the method with simulated data, assuming a typical sigmoidal dose-response curve and assuming imperfect imaging that includes artifactual baseline signal drift and random error. With these few assumptions, rapid quantitative pharmacodynamic imaging reliably estimates EC50 from the simulated data, except when noise overwhelms the drug effect or when the effect occurs only at high doses. In preliminary fMRI studies of primate brain using a dopamine agonist, the observed noise level is modest compared with observed drug effects, and a quantitative EC50 can be obtained from some regional time-signal curves. Taken together, these results suggest that research and clinical applications for rapid quantitative pharmacodynamic imaging are realistic.
△ Less
Submitted 26 May, 2014; v1 submitted 21 April, 2013;
originally announced April 2013.
-
Nonsingular subsampling for S-estimators with categorical predictors
Authors:
Manuel Koller
Abstract:
An integral part of many algorithms for S-estimators of linear regression is random subsampling. For problems with only continuous predictors simple random subsampling is a reliable method to generate initial coefficient estimates that can then be further refined. For data with categorical predictors, however, random subsampling often does not work, thus limiting the use of an otherwise fine estim…
▽ More
An integral part of many algorithms for S-estimators of linear regression is random subsampling. For problems with only continuous predictors simple random subsampling is a reliable method to generate initial coefficient estimates that can then be further refined. For data with categorical predictors, however, random subsampling often does not work, thus limiting the use of an otherwise fine estimator. This also makes the choice of estimator for robust linear regression dependent on the type of predictors, which is an unnecessary nuisance in practice. For data with categorical predictors random subsampling often generates singular subsamples. Since these subsamples cannot be used to calculate coefficient estimates, they have to be discarded. This makes random subsampling slow, especially if some levels of categorical predictors have low frequency, and renders the algorithms infeasible for such problems. This paper introduces an improved subsampling algorithm that only generates nonsingular subsamples. We call it nonsingular subsampling. For data with continuous variables it is as fast as simple random subsampling but much faster for data with categorical predictors. This is achieved by using a modified LU decomposition algorithm that combines the generation of a sample and the solving of the least squares problem.
△ Less
Submitted 28 August, 2012;
originally announced August 2012.