Showing 1–50 of 140 results for author: Hunter, A

The structure and migration of heavily irradiated grain boundaries and dislocations in Ni in the athermal limit

Authors: Ian Chesser, Peter M. Derlet, Avanish Mishra, Sarah Paguaga, Nithin Mathew, Khanh Dang, Blas Pedro Uberuaga, Abigail Hunter, Saryu Fensin

Abstract: The microstructural evolution at and near pre-existing grain boundaries (GBs) and dislocations in materials under high radiation doses is still poorly understood. In this work, we use the creation relaxation algorithm (CRA) developed for atomistic modeling of high-dose irradiation in bulk materials to probe the athermal limit of saturation of GB and dislocation core regions under irradiation in FC… ▽ More The microstructural evolution at and near pre-existing grain boundaries (GBs) and dislocations in materials under high radiation doses is still poorly understood. In this work, we use the creation relaxation algorithm (CRA) developed for atomistic modeling of high-dose irradiation in bulk materials to probe the athermal limit of saturation of GB and dislocation core regions under irradiation in FCC Ni. We find that, upon continuously subjecting a single dislocation or GB to Frenkel pair creation in the athermal limit, a local steady state disordered defect structure is reached with excess properties that fluctuate around constant values. Case studies are given for a straight screw dislocation which elongates into a helix under irradiation and several types of low and high angle GBs, which exhibit coupled responses such as absorption of extrinsic dislocations, roughening and migration. A positive correlation is found between initial GB energy and the local steady state GB energy under irradiation across a wide variety of GB types. Metastable GB structures with similar density in the defect core region but different initial configurations are found to converge to the same limiting structure under CRA. The mechanical responses of pristine and irradiated dislocations and GB structures are compared under an applied shear stress. Irradiated screw and edge dislocations are found to exhibit a hardening response, migrating at larger flow stresses than their pristine counterparts. Mobile GBs are found to exhibit softening or hardening responses depending on GB character. Although some GBs recover their initial pristine structures upon migration outside of the radiation zone, many GBs sustain different flow stresses corresponding to altered mobile core structures. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Identification of Entailment and Contradiction Relations between Natural Language Sentences: A Neurosymbolic Approach

Authors: Xuyao Feng, Anthony Hunter

Abstract: Natural language inference (NLI), also known as Recognizing Textual Entailment (RTE), is an important aspect of natural language understanding. Most research now uses machine learning and deep learning to perform this task on specific datasets, meaning their solution is not explainable nor explicit. To address the need for an explainable approach to RTE, we propose a novel pipeline that is based o… ▽ More Natural language inference (NLI), also known as Recognizing Textual Entailment (RTE), is an important aspect of natural language understanding. Most research now uses machine learning and deep learning to perform this task on specific datasets, meaning their solution is not explainable nor explicit. To address the need for an explainable approach to RTE, we propose a novel pipeline that is based on translating text into an Abstract Meaning Representation (AMR) graph. For this we use a pre-trained AMR parser. We then translate the AMR graph into propositional logic and use a SAT solver for automated reasoning. In text, often commonsense suggests that an entailment (or contradiction) relationship holds between a premise and a claim, but because different wordings are used, this is not identified from their logical representations. To address this, we introduce relaxation methods to allow replacement or forgetting of some propositions. Our experimental results show this pipeline performs well on four RTE datasets. △ Less

Submitted 2 May, 2024; originally announced May 2024.

ACM Class: I.2

Probing the relationship between early star formation and CO in the dwarf irregular galaxy WLM with JWST

Authors: Haylee N. Archer, Deidre A. Hunter, Bruce G. Elmegreen, Monica Rubio, Phil Cigan, Rogier A. Windhorst, Juan R. Cortés, Rolf A. Jansen

Abstract: Wolf-Lundmark-Melotte (WLM) is a Local Group dwarf irregular (dIrr) galaxy with a metallicity 13% of solar. At 1 Mpc, the relative isolation of WLM provides a unique opportunity to investigate the internal mechanisms of star formation at low metallicities. The earliest stages of star formation in larger spirals occur in embedded clusters within molecular clouds, but dIrrs lack the dust, heavy meta… ▽ More Wolf-Lundmark-Melotte (WLM) is a Local Group dwarf irregular (dIrr) galaxy with a metallicity 13% of solar. At 1 Mpc, the relative isolation of WLM provides a unique opportunity to investigate the internal mechanisms of star formation at low metallicities. The earliest stages of star formation in larger spirals occur in embedded clusters within molecular clouds, but dIrrs lack the dust, heavy metals, and organized structure of spirals believed necessary to collapse the molecular clouds into stars. Despite actively forming stars, the early stages of star formation in dIrrs is not well understood. We examine the relationship between early star formation and molecular clouds at low metallicities. We utilize ALMA-detected CO cores, $\textit{JWST}$ near-infrared (NIR) images (F090W, F150W, F250M, and F430M), and $\textit{GALEX}$ far-ultraviolet (FUV) images of WLM to trace molecular clouds, early star formation, and longer star formation timescales respectively. We compare clumps of NIR-bright sources (referred to as objects) categorized into three types based on their proximity to FUV sources and CO cores. We find objects, independent of their location, have similar colors and magnitudes and no discernible difference in temperature. However, we find that objects near CO have higher masses than objects away from CO, independent of proximity to FUV. Additionally, objects near CO are coincident with Spitzer 8 $μ$m sources at a higher frequency than objects elsewhere in WLM. This suggests objects near CO may be embedded star clusters at an earlier stage of star formation, but accurate age estimates for all objects are required for confirmation. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: In press in the Astronomical Journal

Identifying Optimal Launch Sites of High-Altitude Latex-Balloons using Bayesian Optimisation for the Task of Station-Keeping

Authors: Jack Saunders, Sajad Saeedi, Adam Hartshorne, Binbin Xu, Özgur Şimşek, Alan Hunter, Wenbin Li

Abstract: Station-keeping tasks for high-altitude balloons show promise in areas such as ecological surveys, atmospheric analysis, and communication relays. However, identifying the optimal time and position to launch a latex high-altitude balloon is still a challenging and multifaceted problem. For example, tasks such as forest fire tracking place geometric constraints on the launch location of the balloon… ▽ More Station-keeping tasks for high-altitude balloons show promise in areas such as ecological surveys, atmospheric analysis, and communication relays. However, identifying the optimal time and position to launch a latex high-altitude balloon is still a challenging and multifaceted problem. For example, tasks such as forest fire tracking place geometric constraints on the launch location of the balloon. Furthermore, identifying the most optimal location also heavily depends on atmospheric conditions. We first illustrate how reinforcement learning-based controllers, frequently used for station-keeping tasks, can exploit the environment. This exploitation can degrade performance on unseen weather patterns and affect station-keeping performance when identifying an optimal launch configuration. Valuing all states equally in the region, the agent exploits the region's geometry by flying near the edge, leading to risky behaviours. We propose a modification which compensates for this exploitation and finds this leads to, on average, higher steps within the target region on unseen data. Then, we illustrate how Bayesian Optimisation (BO) can identify the optimal launch location to perform station-keeping tasks, maximising the expected undiscounted return from a given rollout. We show BO can find this launch location in fewer steps compared to other optimisation methods. Results indicate that, surprisingly, the most optimal location to launch from is not commonly within the target region. Please find further information about our project at https://sites.google.com/view/bo-lauch-balloon/. △ Less

Submitted 15 March, 2024; originally announced March 2024.

The Interstellar Medium in Dwarf Irregular Galaxies

Authors: Deidre A. Hunter, Bruce G. Elmegreen, Suzanne C. Madden

Abstract: Dwarf irregulars (dIrrs) are among the most common type of galaxy in the Universe. They typically have gas-rich, low surface-brightness, metal-poor, and relatively-thick disks. Here we summarize the current state of our knowledge of the interstellar medium (ISM), including atomic, molecular and ionized gas, along with their dust properties and metals. We also discuss star formation feedback, gas a… ▽ More Dwarf irregulars (dIrrs) are among the most common type of galaxy in the Universe. They typically have gas-rich, low surface-brightness, metal-poor, and relatively-thick disks. Here we summarize the current state of our knowledge of the interstellar medium (ISM), including atomic, molecular and ionized gas, along with their dust properties and metals. We also discuss star formation feedback, gas accretion, and mergers with other dwarfs that connect the ISM to the circumgalactic and intergalactic media. We highlight one of the most persistent mysteries: the nature of pervasive gas that is yet undetected as either molecular or cold hydrogen, the ``dark gas''. Here are a few highlights: 1. Significant quantities of HI are in far-outer gas disks. 2. Cold HI in dIrrs would be molecular in the Milky Way, making the chemical properties of star-forming clouds significantly different. 3. Stellar feedback has a much larger impact in dIrrs than in spiral galaxies. 4. The escape fraction of ionizing photons is significant, making dIrrs a plausible source for reionization in the early Universe. 5. Observations suggest a significantly higher abundance of hydrogen (H$_2$ or cold HI) associated with CO in star-forming regions than that traced by the CO alone. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: To be published in Annual Reviews of Astronomy and Astrophysics 2024, Vol 62

In-plane Antiferromagnetism in Ferromagnetic Kagome Semimetal Co3Sn2S2

Authors: Sandy Adhitia Ekahana, Satoshi Okamoto, Jan Dreiser, Loïc Roduit, Gawryluk Dariusz Jakub, Andrew Hunter, Anna Tamai, Y. Soh

Abstract: Co3Sn2S2 has been reported to be a Weyl semimetal with broken time-reversal symmetry with c axis ferromagnetism (FM) below a Curie temperature of 177 K. Despite the large interest in Co3Sn2S2, the magnetic structure is still under debate and recent studies have challenged our understanding of the magnetic phase diagram of Co3Sn2S2 by reporting unusual magnetic phases including the presence of exch… ▽ More Co3Sn2S2 has been reported to be a Weyl semimetal with broken time-reversal symmetry with c axis ferromagnetism (FM) below a Curie temperature of 177 K. Despite the large interest in Co3Sn2S2, the magnetic structure is still under debate and recent studies have challenged our understanding of the magnetic phase diagram of Co3Sn2S2 by reporting unusual magnetic phases including the presence of exchange bias. Understanding the magnetism of Co3Sn2S2 is important since its electronic band structure including the much-celebrated flat bands and Weyl nodes depend on the magnetic phase. In this work, using X-ray Magnetic Circular Dichroism (XMCD), we establish that the magnetic moment in Co arises from the spin, with negligible orbital moment. In addition, we detect an in-plane AFM minority phase in the sea of a FM phase using spatially-resolved angle-resolved photoemission spectroscopy (μ-ARPES) combined with density functional theory (DFT) calculation. Separately, we detect a sharp flat band precisely at the Fermi level (EF) at some regions in the sample, which we attribute to a surface state. The AFM phase survives even to the low temperature of 6 K. This example of entirely different magnetic ground states in a stoichiometric intermetallic invites further efforts to explore the observed AFM phase and understand the origin and nature of the magnetic and electronic inhomogeneity on the mesoscale and the interface between the AFM and FM phases. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Unsupervised Learning of Graph from Recipes

Authors: Aissatou Diallo, Antonis Bikakis, Luke Dickens, Anthony Hunter, Rob Miller

Abstract: Cooking recipes are one of the most readily available kinds of procedural text. They consist of natural language instructions that can be challenging to interpret. In this paper, we propose a model to identify relevant information from recipes and generate a graph to represent the sequence of actions in the recipe. In contrast with other approaches, we use an unsupervised approach. We iteratively… ▽ More Cooking recipes are one of the most readily available kinds of procedural text. They consist of natural language instructions that can be challenging to interpret. In this paper, we propose a model to identify relevant information from recipes and generate a graph to represent the sequence of actions in the recipe. In contrast with other approaches, we use an unsupervised approach. We iteratively learn the graph structure and the parameters of a $\mathsf{GNN}$ encoding the texts (text-to-graph) one sequence at a time while providing the supervision by decoding the graph into text (graph-to-text) and comparing the generated text to the input. We evaluate the approach by comparing the identified entities with annotated datasets, comparing the difference between the input and output texts, and comparing our generated graphs with those generated by state of the art methods. △ Less

Submitted 22 January, 2024; originally announced January 2024.

PizzaCommonSense: Learning to Model Commonsense Reasoning about Intermediate Steps in Cooking Recipes

Authors: Aissatou Diallo, Antonis Bikakis, Luke Dickens, Anthony Hunter, Rob Miller

Abstract: Decoding the core of procedural texts, exemplified by cooking recipes, is crucial for intelligent reasoning and instruction automation. Procedural texts can be comprehensively defined as a sequential chain of steps to accomplish a task employing resources. From a cooking perspective, these instructions can be interpreted as a series of modifications to a food preparation, which initially comprises… ▽ More Decoding the core of procedural texts, exemplified by cooking recipes, is crucial for intelligent reasoning and instruction automation. Procedural texts can be comprehensively defined as a sequential chain of steps to accomplish a task employing resources. From a cooking perspective, these instructions can be interpreted as a series of modifications to a food preparation, which initially comprises a set of ingredients. These changes involve transformations of comestible resources. For a model to effectively reason about cooking recipes, it must accurately discern and understand the inputs and outputs of intermediate steps within the recipe. Aiming to address this, we present a new corpus of cooking recipes enriched with descriptions of intermediate steps of the recipes that explicate the input and output for each step. We discuss the data collection process, investigate and provide baseline models based on T5 and GPT-3.5. This work presents a challenging task and insight into commonsense reasoning and procedural text generation. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Comments: The data is available at: https://github.com/adiallo07/PizzaCommonsense

Controlling crystal cleavage in Focused Ion Beam shaped specimens for surface spectroscopy

Authors: A. Hunter, C. Putzke, I. Gaponenko, A. Tamai, F. Baumberger, P. J. W. Moll

Abstract: Our understanding of quantum materials is commonly based on precise determinations of their electronic spectrum by spectroscopic means, most notably angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy (STM). Both require atomically clean and flat crystal surfaces which traditionally are prepared by in-situ mechanical cleaving in ultrahigh vacuum chambers. We present… ▽ More Our understanding of quantum materials is commonly based on precise determinations of their electronic spectrum by spectroscopic means, most notably angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy (STM). Both require atomically clean and flat crystal surfaces which traditionally are prepared by in-situ mechanical cleaving in ultrahigh vacuum chambers. We present a new approach that addresses three main issues of the current state-of-the-art methods: 1) Cleaving is a highly stochastic and thus inefficient process; 2) Fracture processes are governed by the bonds in a bulk crystal, and many materials and surfaces simply do not cleave; 3) The location of the cleave is random, preventing data collection at specified regions of interest. Our new workflow is based on Focused Ion Beam (FIB) machining of micro-stress lenses in which shape (rather than crystalline) anisotropy dictates the plane of cleavage, which can be placed at a specific target layer. As proof-of-principle we show ARPES results from micro-cleaves of Sr$_2$RuO$_4$ along the ac plane and from two surface orientations of SrTiO$_3$, a notoriously difficult to cleave cubic perovskite. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Identifying Linear Relational Concepts in Large Language Models

Authors: David Chanin, Anthony Hunter, Oana-Maria Camburu

Abstract: Transformer language models (LMs) have been shown to represent concepts as directions in the latent space of hidden activations. However, for any human-interpretable concept, how can we find its direction in the latent space? We present a technique called linear relational concepts (LRC) for finding concept directions corresponding to human-interpretable concepts by first modeling the relation bet… ▽ More Transformer language models (LMs) have been shown to represent concepts as directions in the latent space of hidden activations. However, for any human-interpretable concept, how can we find its direction in the latent space? We present a technique called linear relational concepts (LRC) for finding concept directions corresponding to human-interpretable concepts by first modeling the relation between subject and object as a linear relational embedding (LRE). We find that inverting the LRE and using earlier object layers results in a powerful technique for finding concept directions that outperforms standard black-box probing classifiers. We evaluate LRCs on their performance as concept classifiers as well as their ability to causally change model output. △ Less

Submitted 29 March, 2024; v1 submitted 15 November, 2023; originally announced November 2023.

Comments: To be published in NAACL 2024

Data downloaded via parachute from a NASA super-pressure balloon

Authors: Ellen L. Sirks, Richard Massey, Ajay S. Gill, Jason Anderson, Steven J. Benton, Anthony M. Brown, Paul Clark, Joshua English, Spencer W. Everett, Aurelien A. Fraisse, Hugo Franco, John W. Hartley, David Harvey, Bradley Holder, Andrew Hunter, Eric M. Huff, Andrew Hynous, Mathilde Jauzac, William C. Jones, Nikky Joyce, Duncan Kennedy, David Lagattuta, Jason S. -Y. Leung, Lun Li, Stephen Lishman , et al. (18 additional authors not shown)

Abstract: In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) cap… ▽ More In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: 12 pages

Journal ref: Aerospace 2023, 10, 960

Some Options for Instantiation of Bipolar Argument Graphs with Deductive Arguments

Authors: Anthony Hunter

Abstract: Argument graphs provide an abstract representation of an argumentative situation. A bipolar argument graph is a directed graph where each node denotes an argument, and each arc denotes the influence of one argument on another. Here we assume that the influence is supporting, attacking, or ambiguous. In a bipolar argument graph, each argument is atomic and so it has no internal structure. Yet to be… ▽ More Argument graphs provide an abstract representation of an argumentative situation. A bipolar argument graph is a directed graph where each node denotes an argument, and each arc denotes the influence of one argument on another. Here we assume that the influence is supporting, attacking, or ambiguous. In a bipolar argument graph, each argument is atomic and so it has no internal structure. Yet to better understand the nature of the individual arguments, and how they interact, it is important to consider their internal structure. To address this need, this paper presents a framework based on the use of logical arguments to instantiate bipolar argument graphs, and a set of possible constraints on instantiating arguments that take into account the internal structure of the arguments, and the types of relationship between arguments. △ Less

Submitted 8 August, 2023; originally announced August 2023.

Comments: 15 pages

The fate of quasiparticles at high-temperature

Authors: A. Hunter, S. Beck, E. Cappelli, F. Margot, M. Straub, Y. Alexanian, G. Gatti, M. D. Watson, T. K. Kim, C. Cacho, N. C. Plumb, M. Shi, M. Radović, D. A. Sokolov, A. P. Mackenzie, M. Zingl, J. Mravlje, A. Georges, F. Baumberger, A. Tamai

Abstract: We study the temperature evolution of quasiparticles in the correlated metal Sr$_2$RuO$_4$. Our angle resolved photoemission data show that quasiparticles persist up to temperatures above 200~K, far beyond the Fermi liquid regime. Extracting the quasiparticle self-energy we demonstrate that the quasiparticle residue $Z$ increases with increasing temperature. Quasiparticles eventually disappear on… ▽ More We study the temperature evolution of quasiparticles in the correlated metal Sr$_2$RuO$_4$. Our angle resolved photoemission data show that quasiparticles persist up to temperatures above 200~K, far beyond the Fermi liquid regime. Extracting the quasiparticle self-energy we demonstrate that the quasiparticle residue $Z$ increases with increasing temperature. Quasiparticles eventually disappear on approaching the bad metal state of Sr$_2$RuO$_4$ not by losing weight but via excessive broadening from super-Planckian scattering. We further show that the Fermi surface of Sr$_2$RuO$_4$ - defined as the loci where the spectral function peaks - deflates with increasing temperature. These findings are in semi-quantitative agreement with dynamical mean field theory calculations. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: Supplemental Material available upon request

Journal ref: Phys. Rev. Lett. 131, 236502 (2023)

Universal Upper End of the Stellar Initial Mass Function in the Young and Compact LEGUS clusters

Authors: Dooseok Escher Jung, Daniela Calzetti, Matteo Messa, Mark Heyer, Mattia Sirressi, Sean T. Linden, Angela Adamo, Rupali Chandar, Michele Cignoni, David O. Cook, Clare L. Dobbs, Bruce G. Elmegreen, Aaron S. Evans, Michele Fumagalli, John S. Gallagher III, Deidre A. Hunter, Kelsey E. Johnson, Robert C. Kennicutt Jr., Mark R. Krumholz, Daniel Schaerer, Elena Sabbi, Linda J. Smith, Monica Tosi, Aida Wofford

Abstract: We investigate the variation in the upper end of stellar initial mass function (uIMF) in 375 young and compact star clusters in five nearby galaxies within $\sim 5$ Mpc. All the young stellar clusters (YSCs) in the sample have ages $\lesssim 4$ Myr and masses above 500 $M_{\odot}$, according to standard stellar models. The YSC catalogs were produced from Hubble Space Telescope images obtained as p… ▽ More We investigate the variation in the upper end of stellar initial mass function (uIMF) in 375 young and compact star clusters in five nearby galaxies within $\sim 5$ Mpc. All the young stellar clusters (YSCs) in the sample have ages $\lesssim 4$ Myr and masses above 500 $M_{\odot}$, according to standard stellar models. The YSC catalogs were produced from Hubble Space Telescope images obtained as part of the Legacy ExtraGalactic UV Survey (LEGUS) Hubble treasury program. They are used here to test whether the uIMF is universal or changes as a function of the cluster's stellar mass. We perform this test by measuring the H$α$ luminosity of the star clusters as a proxy for their ionizing photon rate, and charting its trend as a function of cluster mass. Large cluster numbers allow us to mitigate the stochastic sampling of the uIMF. The advantage of our approach relative to previous similar attempts is the use of cluster catalogs that have been selected independently of the presence of H$α$ emission, thus removing a potential sample bias. We find that the uIMF, as traced by the H$α$ emission, shows no dependence on cluster mass, suggesting that the maximum stellar mass that can be produced in star clusters is universal, in agreement with previous findings. △ Less

Submitted 28 July, 2023; originally announced July 2023.

A Graphical Formalism for Commonsense Reasoning with Recipes

Authors: Antonis Bikakis, Aissatou Diallo, Luke Dickens, Anthony Hunter, Rob Miller

Abstract: Whilst cooking is a very important human activity, there has been little consideration given to how we can formalize recipes for use in a reasoning framework. We address this need by proposing a graphical formalization that captures the comestibles (ingredients, intermediate food items, and final products), and the actions on comestibles in the form of a labelled bipartite graph. We then propose f… ▽ More Whilst cooking is a very important human activity, there has been little consideration given to how we can formalize recipes for use in a reasoning framework. We address this need by proposing a graphical formalization that captures the comestibles (ingredients, intermediate food items, and final products), and the actions on comestibles in the form of a labelled bipartite graph. We then propose formal definitions for comparing recipes, for composing recipes from subrecipes, and for deconstructing recipes into subrecipes. We also introduce and compare two formal definitions for substitution into recipes which are required when there are missing ingredients, or some actions are not possible, or because there is a need to change the final product somehow. △ Less

Submitted 15 June, 2023; originally announced June 2023.

Comments: 10 pages

Electronic structure of few-layer black phosphorus from $μ$-ARPES

Authors: Florian Margot, Simone Lisi, Irène Cucchi, Edoardo Cappelli, Andrew Hunter, Ignacio Gutiérrez-Lezama, KeYuan Ma, Fabian von Rohr, Christophe Berthod, Francesco Petocchi, Samuel Poncé, Nicola Marzari, Marco Gibertini, Anna Tamai, Alberto F. Morpurgo, Felix Baumberger

Abstract: Black phosphorus (BP) stands out among two-dimensional (2D) semiconductors because of its high mobility and thickness dependent direct band gap. However, the quasiparticle band structure of ultrathin BP has remained inaccessible to experiment thus far. Here we use a recently developed laser-based micro-focus angle resolved photoemission ($μ$-ARPES) system to establish the electronic structure of 2… ▽ More Black phosphorus (BP) stands out among two-dimensional (2D) semiconductors because of its high mobility and thickness dependent direct band gap. However, the quasiparticle band structure of ultrathin BP has remained inaccessible to experiment thus far. Here we use a recently developed laser-based micro-focus angle resolved photoemission ($μ$-ARPES) system to establish the electronic structure of 2-9 layer BP from experiment. Our measurements unveil ladders of anisotropic, quantized subbands at energies that deviate from the scaling observed in conventional semiconductor quantum wells. We quantify the anisotropy of the effective masses and determine universal tight-binding parameters which provide an accurate description of the electronic structure for all thicknesses. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: Supporting Information available upon request

Journal ref: Nano Lett. 2023, 23 6433-6439

The James Webb Space Telescope Mission

Authors: Jonathan P. Gardner, John C. Mather, Randy Abbott, James S. Abell, Mark Abernathy, Faith E. Abney, John G. Abraham, Roberto Abraham, Yasin M. Abul-Huda, Scott Acton, Cynthia K. Adams, Evan Adams, David S. Adler, Maarten Adriaensen, Jonathan Albert Aguilar, Mansoor Ahmed, Nasif S. Ahmed, Tanjira Ahmed, Rüdeger Albat, Loïc Albert, Stacey Alberts, David Aldridge, Mary Marsha Allen, Shaune S. Allen, Martin Altenburg , et al. (983 additional authors not shown)

Abstract: Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono… ▽ More Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

Three-dimensional morphology of an ultrafine Al-Si eutectic produced via laser rapid solidification

Authors: Xinyi Zhou, Paul Chao, Luke Sloan, Huai-Hsun Lien, Allen H. Hunter, Amit Misra, Ashwin J. Shahani

Abstract: Al-Si alloys processed by laser rapid solidification yield eutectic microstructures with ultrafine and interconnected fibers. Such fibrous structures have long been thought to bear resemblance to those formed in impurity-doped alloys upon conventional casting. Here, we show that any similarity is purely superficial. By harnessing high-throughput characterization and computer vision techniques, we… ▽ More Al-Si alloys processed by laser rapid solidification yield eutectic microstructures with ultrafine and interconnected fibers. Such fibrous structures have long been thought to bear resemblance to those formed in impurity-doped alloys upon conventional casting. Here, we show that any similarity is purely superficial. By harnessing high-throughput characterization and computer vision techniques, we perform a three-dimensional analysis of the branching behavior of the ultrafine eutectic and compare it against an impurity-modified eutectic as well as a random fractal (as a benchmark). Differences in the branching statistics point to different microstructural origins of the impurity- and quench-modified eutectic. Our quantitative approach is not limited to the data presented here but can be used to extract abstract information from other volumetric datasets, without customization. △ Less

Submitted 7 April, 2023; originally announced April 2023.

Comments: 22 pages, 4 main figures, 5 supplemental figures, 1 video file

Journal ref: Scripta Materialia 232 (2023) 115471

Neuro-symbolic Commonsense Social Reasoning

Authors: David Chanin, Anthony Hunter

Abstract: Social norms underlie all human social interactions, yet formalizing and reasoning with them remains a major challenge for AI systems. We present a novel system for taking social rules of thumb (ROTs) in natural language from the Social Chemistry 101 dataset and converting them to first-order logic where reasoning is performed using a neuro-symbolic theorem prover. We accomplish this in several st… ▽ More Social norms underlie all human social interactions, yet formalizing and reasoning with them remains a major challenge for AI systems. We present a novel system for taking social rules of thumb (ROTs) in natural language from the Social Chemistry 101 dataset and converting them to first-order logic where reasoning is performed using a neuro-symbolic theorem prover. We accomplish this in several steps. First, ROTs are converted into Abstract Meaning Representation (AMR), which is a graphical representation of the concepts in a sentence, and align the AMR with RoBERTa embeddings. We then generate alternate simplified versions of the AMR via a novel algorithm, recombining and merging embeddings for added robustness against different wordings of text, and incorrect AMR parses. The AMR is then converted into first-order logic, and is queried with a neuro-symbolic theorem prover. The goal of this paper is to develop and evaluate a neuro-symbolic method which performs explicit reasoning about social situations in a logical form. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Resource-Constrained Station-Keeping for Helium Balloons using Reinforcement Learning

Authors: Jack Saunders, Loïc Prenevost, Özgür Şimşek, Alan Hunter, Wenbin Li

Abstract: High altitude balloons have proved useful for ecological aerial surveys, atmospheric monitoring, and communication relays. However, due to weight and power constraints, there is a need to investigate alternate modes of propulsion to navigate in the stratosphere. Very recently, reinforcement learning has been proposed as a control scheme to maintain the balloon in the region of a fixed location, fa… ▽ More High altitude balloons have proved useful for ecological aerial surveys, atmospheric monitoring, and communication relays. However, due to weight and power constraints, there is a need to investigate alternate modes of propulsion to navigate in the stratosphere. Very recently, reinforcement learning has been proposed as a control scheme to maintain the balloon in the region of a fixed location, facilitated through diverse opposing wind-fields at different altitudes. Although air-pump based station keeping has been explored, there is no research on the control problem for venting and ballasting actuated balloons, which is commonly used as a low-cost alternative. We show how reinforcement learning can be used for this type of balloon. Specifically, we use the soft actor-critic algorithm, which on average is able to station-keep within 50\;km for 25\% of the flight, consistent with state-of-the-art. Furthermore, we show that the proposed controller effectively minimises the consumption of resources, thereby supporting long duration flights. We frame the controller as a continuous control reinforcement learning problem, which allows for a more diverse range of trajectories, as opposed to current state-of-the-art work, which uses discrete action spaces. Furthermore, through continuous control, we can make use of larger ascent rates which are not possible using air-pumps. The desired ascent-rate is decoupled into desired altitude and time-factor to provide a more transparent policy, compared to low-level control commands used in previous works. Finally, by applying the equations of motion, we establish appropriate thresholds for venting and ballasting to prevent the agent from exploiting the environment. More specifically, we ensure actions are physically feasible by enforcing constraints on venting and ballasting. △ Less

Submitted 2 March, 2023; originally announced March 2023.

The Science Performance of JWST as Characterized in Commissioning

Authors: Jane Rigby, Marshall Perrin, Michael McElwain, Randy Kimble, Scott Friedman, Matt Lallo, René Doyon, Lee Feinberg, Pierre Ferruit, Alistair Glasse, Marcia Rieke, George Rieke, Gillian Wright, Chris Willott, Knicole Colon, Stefanie Milam, Susan Neff, Christopher Stark, Jeff Valenti, Jim Abell, Faith Abney, Yasin Abul-Huda, D. Scott Acton, Evan Adams, David Adler , et al. (601 additional authors not shown)

Abstract: This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries f… ▽ More This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies. △ Less

Submitted 10 April, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 5th version as accepted to PASP; 31 pages, 18 figures; https://iopscience.iop.org/article/10.1088/1538-3873/acb293

Journal ref: PASP 135 048001 (2023)

Anomalous quasiparticles in the zone center electron pocket of the kagomé ferromagnet Fe3Sn2

Authors: Sandy Adhitia Ekahana, Y. Soh, Anna Tamai, Daniel Gosálbez-Martínez, Mengyu Yao, Andrew Hunter, Wenhui Fan, Yihao Wang, Junbo Li, Armin Kleibert, C. A. F. Vaz, Junzhang Ma, Yimin Xiong, Oleg V. Yazyev, Felix Baumberger, Ming Shi, Gabriel Aeppli

Abstract: One material containing kagome bilayers and featuring both exceptional magnetism and electron transport is the ferromagnetic metal Fe3Sn2. Notwithstanding the widespread interest in Fe3Sn2, crystal twinning, difficulties in distinguishing surface from bulk states, and a large unit cell have until now prevented the synchrotron-based spectroscopic observation of sharply resolved quasiparticles near… ▽ More One material containing kagome bilayers and featuring both exceptional magnetism and electron transport is the ferromagnetic metal Fe3Sn2. Notwithstanding the widespread interest in Fe3Sn2, crystal twinning, difficulties in distinguishing surface from bulk states, and a large unit cell have until now prevented the synchrotron-based spectroscopic observation of sharply resolved quasiparticles near the Fermi surface which could be responsible for the anomalous properties appearing at low temperatures for the material. Here we report microfocused laser-based angle-resolved photoemission spectroscopy (micro-ARPES), which offers the first look at such quasiparticles. The high spatial resolution allows individual crystal twin domains to be examined in isolation, resulting in the discovery of three-fold symmetric electron pockets at the Brillouin zone (BZ) center, not predicted by early tight-binding descriptions but in agreement with density functional theory (DFT) calculations, which also feature Weyl nodes. The quasiparticles in these pockets have remarkably long mean free paths, and their Fermi surface area is consistent with reported quantum oscillations. At the same time, though, the best-defined Fermi surface is reduced at low temperature, and the quasiparticles generally are marginal in the sense that their wavelength uncertainty is of order the deviation of the quasiparticle wavelength from the Fermi vector. We attribute these manifestations of strong electron-electron interactions to a flat band predicted by our DFT to lie just above the dispersive bands seen in this experiment. Thus, beyond demonstrating the impact of twin averaging for ARPES measurements of band structures, our experiments reveal many-body physics unaccounted for by current theories of metallic kagome ferromagnets. △ Less

Submitted 28 June, 2022; originally announced June 2022.

A new framework for computing a general local self-diffusion coefficient using statistical mechanics

Authors: Michelle A. Hunter, Baris Demir, Charlotte F. Petersen, Debra J. Searles

Abstract: Widely applicable, modified Green-Kubo expressions for the local diffusion coefficient ($D_l$) are obtained using linear response theory. In contrast to past definitions in use, these expressions are statistical mechanical results. Molecular simulations of systems with anisotropic diffusion and an inhomogeneous density profile confirm the validity of the results. Diffusion coefficients determined… ▽ More Widely applicable, modified Green-Kubo expressions for the local diffusion coefficient ($D_l$) are obtained using linear response theory. In contrast to past definitions in use, these expressions are statistical mechanical results. Molecular simulations of systems with anisotropic diffusion and an inhomogeneous density profile confirm the validity of the results. Diffusion coefficients determined from different expressions in terms of currents and velocity correlations agree in the limit of large systems. Furthermore, they apply to arbitrarily small local regions, making them readily applicable to nanoscale and inhomogeneous systems where knowledge of $D_l$ is important. △ Less

Submitted 12 May, 2022; originally announced May 2022.

Journal ref: Journal of Chemical Theory and Computation, 18 (6), 3357-3363 (2022)

Predicting electrical conductivity in Cu/Nb composites: a combined model-experiment study

Authors: Daniel N. Blaschke, Cody Miller, Ryan Mier, Carl Osborn, Sean M. Thomas, Eric L. Tegtmeier, William P. Winter, John S. Carpenter, Abigail Hunter

Abstract: The generation of high magnetic fields requires materials with high electric conductivity and good strength properties. Cu/Nb composites are considered to be good candidates for this purpose. In this work we aim to predict, from theory, the dependence of electric conductivity on the microstructure, most notably on the layer thickness and grain sizes. We also conducted experiments to calibrate and… ▽ More The generation of high magnetic fields requires materials with high electric conductivity and good strength properties. Cu/Nb composites are considered to be good candidates for this purpose. In this work we aim to predict, from theory, the dependence of electric conductivity on the microstructure, most notably on the layer thickness and grain sizes. We also conducted experiments to calibrate and validate our simulations. Bimetal interfaces and grain boundaries are confirmed to have the largest impact on conductivity in this composite material. In this approach, a distribution of the layer thickness is accounted for in order to better model the experimentally observed microstructure. Because layer thicknesses below the mean free path of Cu significantly degrade the conductivity, an average layer thickness larger than expected may be needed to meet conductivity requirements in order to minimize these smaller layers in the distribution. We also investigate the effect of variations in volume fraction of Nb and temperature on the material's conductivity. △ Less

Submitted 14 June, 2022; v1 submitted 7 April, 2022; originally announced April 2022.

Comments: 18 pages, 5 figures, 2 tables; v2 minor clarifications

Report number: LA-UR-21-30714

Journal ref: J. Appl. Phys. 132 (2022) 045105

Electronic structure of the highly conductive perovskite oxide SrMoO$_3$

Authors: E. Cappelli, A. Hampel, A. Chikina, E. Bonini Guedes, G. Gatti, A. Hunter, J. Issing, N. Biskup, M. Varela, Cyrus E. Dreyer, A. Tamai, A. Georges, F. Y. Bruno, M. Radovic, F. Baumberger

Abstract: We use angle-resolved photoemission to map the Fermi surface and quasiparticle dispersion of bulk-like thin films of SrMoO$_3$ grown by pulsed laser deposition. The electronic self-energy deduced from our data reveals weak to moderate correlations in SrMoO$_3$, consistent with our observation of well-defined electronic states over the entire occupied band width. We further introduce spectral funct… ▽ More We use angle-resolved photoemission to map the Fermi surface and quasiparticle dispersion of bulk-like thin films of SrMoO$_3$ grown by pulsed laser deposition. The electronic self-energy deduced from our data reveals weak to moderate correlations in SrMoO$_3$, consistent with our observation of well-defined electronic states over the entire occupied band width. We further introduce spectral function calculations that combine dynamical mean-field theory with an unfolding procedure of density functional calculations and demonstrate good agreement of this approach with our experiments. △ Less

Submitted 11 March, 2022; originally announced March 2022.

A Search for correlations between turbulence and star formation in THINGS galaxies

Authors: Bruce G. Elmegreen, Zorayda Martinez, Deidre A. Hunter

Abstract: The spatial range for feedback from star formation varies from molecular cloud disruption on parsec scales to supershells and disk blowout on kiloparsec scales. The relative amounts of energy and momentum given to these scales is important for understanding the termination of star formation in any one region and the origin of interstellar turbulence and disk stability in galaxies as a whole. Here… ▽ More The spatial range for feedback from star formation varies from molecular cloud disruption on parsec scales to supershells and disk blowout on kiloparsec scales. The relative amounts of energy and momentum given to these scales is important for understanding the termination of star formation in any one region and the origin of interstellar turbulence and disk stability in galaxies as a whole. Here we measure for eleven THINGS galaxies the excess kinetic energy, velocity dispersion and surface density of HI gas associated with regions of excess star formation, where the excess is determined from the difference between the observed local value and the azimuthal average. We find small decreases in the excess kinetic energy and velocity dispersion in regions of excess star formation rate density, suggesting that most of the feedback energy does not go into local HI motion. Most likely it disrupts molecular clouds and dissipates rapidly at high gas density. Some could also be distributed over larger regions, filling in spaces between the peaks of star formation and contributing to other energy sources from self-gravity and spiral arm shocks. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Comments: accepted by ApJ, 17 pages, 14 figures

The Environments of CO Cores and Star Formation in the Dwarf Irregular Galaxy WLM

Authors: Haylee N. Archer, Deidre A. Hunter, Bruce G. Elmegreen, Phil Cigan, Rolf A. Jansen, Rogier A. Windhorst, Leslie K. Hunt, Monica Rubio

Abstract: The low metallicities of dwarf irregular galaxies (dIrr) greatly influence the formation and structure of molecular clouds. These clouds, which consist primarily of H$_2$, are typically traced by CO, but low metallicity galaxies are found to have little CO despite ongoing star formation. In order to probe the conditions necessary for CO core formation in dwarf galaxies, we have used the catalog of… ▽ More The low metallicities of dwarf irregular galaxies (dIrr) greatly influence the formation and structure of molecular clouds. These clouds, which consist primarily of H$_2$, are typically traced by CO, but low metallicity galaxies are found to have little CO despite ongoing star formation. In order to probe the conditions necessary for CO core formation in dwarf galaxies, we have used the catalog of Rubio et al. (2022, in preparation) for CO cores in WLM, a Local Group dwarf with an oxygen abundance that is 13% of solar. Here we aim to characterize the galactic environments in which these 57 CO cores formed. We grouped the cores together based on proximity to each other and strong FUV emission, examining properties of the star forming region enveloping the cores and the surrounding environment where the cores formed. We find that high HI surface density does not necessarily correspond to higher total CO mass, but regions with higher CO mass have higher HI surface densities. We also find the cores in star forming regions spanning a wide range of ages show no correlation between age and CO core mass, suggesting that the small size of the cores is not due to fragmentation of the clouds with age. The presence of CO cores in a variety of different local environments, along with the similar properties between star forming regions with and without CO cores, leads us to conclude that there are no obvious environmental characteristics that drive the formation of these CO cores. △ Less

Submitted 26 January, 2022; originally announced January 2022.

Comments: In press in the Astronomical Journal

Fast and high-fidelity state preparation and measurement in triple-quantum-dot spin qubits

Authors: Jacob Z. Blumoff, Andrew S. Pan, Tyler E. Keating, Reed W. Andrews, David W. Barnes, Teresa L. Brecht, Edward T. Croke, Larken E. Euliss, Jacob A. Fast, Clayton A. C. Jackson, Aaron M. Jones, Joseph Kerckhoff, Robert K. Lanza, Kate Raach, Bryan J. Thomas, Roland Velunta, Aaron J. Weinstein, Thaddeus D. Ladd, Kevin Eng, Matthew G. Borselli, Andrew T. Hunter, Matthew T. Rakher

Abstract: We demonstrate rapid, high-fidelity state preparation and measurement in exchange-only Si/SiGe triple-quantum-dot qubits. Fast measurement integration ($980$ ns) and initialization ($\approx 300$ ns) operations are performed with all-electrical, baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but appli… ▽ More We demonstrate rapid, high-fidelity state preparation and measurement in exchange-only Si/SiGe triple-quantum-dot qubits. Fast measurement integration ($980$ ns) and initialization ($\approx 300$ ns) operations are performed with all-electrical, baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of $2.5\pm0.5\times 10^{-3}$. This result is enabled by a high-valley-splitting heterostructure, initialization at the 2-to-3 electron charge boundary, and careful assessment and mitigation of $T_1$ during spin-to-charge conversion. The ultimate fidelity is limited by a number of comparably-important factors, and we identify clear paths towards further improved fidelity and speed. Along with an observed single-qubit randomized benchmarking error rate of $1.7\times 10^{-3}$, this work demonstrates initialization, control, and measurement of Si/SiGe triple-dot qubits at fidelities and durations which are promising for scalable quantum information processing. △ Less

Submitted 28 January, 2022; v1 submitted 17 December, 2021; originally announced December 2021.

Journal ref: PRX Quantum 3, 010352 (2022)

Automated tabulation of clinical trial results: A joint entity and relation extraction approach with transformer-based language representations

Authors: Jetsun Whitton, Anthony Hunter

Abstract: Evidence-based medicine, the practice in which healthcare professionals refer to the best available evidence when making decisions, forms the foundation of modern healthcare. However, it relies on labour-intensive systematic reviews, where domain specialists must aggregate and extract information from thousands of publications, primarily of randomised controlled trial (RCT) results, into evidence… ▽ More Evidence-based medicine, the practice in which healthcare professionals refer to the best available evidence when making decisions, forms the foundation of modern healthcare. However, it relies on labour-intensive systematic reviews, where domain specialists must aggregate and extract information from thousands of publications, primarily of randomised controlled trial (RCT) results, into evidence tables. This paper investigates automating evidence table generation by decomposing the problem across two language processing tasks: \textit{named entity recognition}, which identifies key entities within text, such as drug names, and \textit{relation extraction}, which maps their relationships for separating them into ordered tuples. We focus on the automatic tabulation of sentences from published RCT abstracts that report the results of the study outcomes. Two deep neural net models were developed as part of a joint extraction pipeline, using the principles of transfer learning and transformer-based language representations. To train and test these models, a new gold-standard corpus was developed, comprising almost 600 result sentences from six disease areas. This approach demonstrated significant advantages, with our system performing well across multiple natural language processing tasks and disease areas, as well as in generalising to disease domains unseen during training. Furthermore, we show these results were achievable through training our models on as few as 200 example sentences. The final system is a proof of concept that the generation of evidence tables can be semi-automated, representing a step towards fully automating systematic reviews. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Machine Learning for Utility Prediction in Argument-Based Computational Persuasion

Authors: Ivan Donadello, Anthony Hunter, Stefano Teso, Mauro Dragoni

Abstract: Automated persuasion systems (APS) aim to persuade a user to believe something by entering into a dialogue in which arguments and counterarguments are exchanged. To maximize the probability that an APS is successful in persuading a user, it can identify a global policy that will allow it to select the best arguments it presents at each stage of the dialogue whatever arguments the user presents. Ho… ▽ More Automated persuasion systems (APS) aim to persuade a user to believe something by entering into a dialogue in which arguments and counterarguments are exchanged. To maximize the probability that an APS is successful in persuading a user, it can identify a global policy that will allow it to select the best arguments it presents at each stage of the dialogue whatever arguments the user presents. However, in real applications, such as for healthcare, it is unlikely the utility of the outcome of the dialogue will be the same, or the exact opposite, for the APS and user. In order to deal with this situation, games in extended form have been harnessed for argumentation in Bi-party Decision Theory. This opens new problems that we address in this paper: (1) How can we use Machine Learning (ML) methods to predict utility functions for different subpopulations of users? and (2) How can we identify for a new user the best utility function from amongst those that we have learned? To this extent, we develop two ML methods, EAI and EDS, that leverage information coming from the users to predict their utilities. EAI is restricted to a fixed amount of information, whereas EDS can choose the information that best detects the subpopulations of a user. We evaluate EAI and EDS in a simulation setting and in a realistic case study concerning healthy eating habits. Results are promising in both cases, but EDS is more effective at predicting useful utility functions. △ Less

Submitted 15 December, 2021; v1 submitted 9 December, 2021; originally announced December 2021.

Comments: Updated: disclose fundings, remove unused files from source

Repurposing of Resources: from Everyday Problem Solving through to Crisis Management

Authors: Antonis Bikakis, Luke Dickens, Anthony Hunter, Rob Miller

Abstract: The human ability to repurpose objects and processes is universal, but it is not a well-understood aspect of human intelligence. Repurposing arises in everyday situations such as finding substitutes for missing ingredients when cooking, or for unavailable tools when doing DIY. It also arises in critical, unprecedented situations needing crisis management. After natural disasters and during wartime… ▽ More The human ability to repurpose objects and processes is universal, but it is not a well-understood aspect of human intelligence. Repurposing arises in everyday situations such as finding substitutes for missing ingredients when cooking, or for unavailable tools when doing DIY. It also arises in critical, unprecedented situations needing crisis management. After natural disasters and during wartime, people must repurpose the materials and processes available to make shelter, distribute food, etc. Repurposing is equally important in professional life (e.g. clinicians often repurpose medicines off-license) and in addressing societal challenges (e.g. finding new roles for waste products,). Despite the importance of repurposing, the topic has received little academic attention. By considering examples from a variety of domains such as every-day activities, drug repurposing and natural disasters, we identify some principle characteristics of the process and describe some technical challenges that would be involved in modelling and simulating it. We consider cases of both substitution, i.e. finding an alternative for a missing resource, and exploitation, i.e. identifying a new role for an existing resource. We argue that these ideas could be developed into general formal theory of repurposing, and that this could then lead to the development of AI methods based on commonsense reasoning, argumentation, ontological reasoning, and various machine learning methods, to develop tools to support repurposing in practice. △ Less

Submitted 17 September, 2021; originally announced September 2021.

Comments: 16 pages

ACM Class: I.2.4; I.2.6; I.2.7

$\textit{Herschel}$ Photometric Observations of $\mathrm{L{\small{ITTLE}}}$ $\mathrm{T{\small{HINGS}}}$ Dwarf Galaxies

Authors: Phil Cigan, Lisa M. Young, Haley L. Gomez, Suzanne C. Madden, Pieter De Vis, Deidre A. Hunter, Bruce G. Elmegreen, Elias Brinks

Abstract: We present here far-infrared photometry of galaxies in a sample that is relatively unexplored at these wavelengths: low-metallicity dwarf galaxies with moderate star formation rates. Four dwarf irregular galaxies from the $\mathrm{L{\small{ITTLE}}}$ $\mathrm{T{\small{HINGS}}}$ survey are considered, with deep $\textit{Herschel}$ PACS and SPIRE observations at 100 $μ$m, 160 $μ$m, 250 $μ$m, 350 $μ$m… ▽ More We present here far-infrared photometry of galaxies in a sample that is relatively unexplored at these wavelengths: low-metallicity dwarf galaxies with moderate star formation rates. Four dwarf irregular galaxies from the $\mathrm{L{\small{ITTLE}}}$ $\mathrm{T{\small{HINGS}}}$ survey are considered, with deep $\textit{Herschel}$ PACS and SPIRE observations at 100 $μ$m, 160 $μ$m, 250 $μ$m, 350 $μ$m, and 500 $μ$m. Results from modified-blackbody fits indicate that these galaxies have low dust masses and cooler dust temperatures than more actively star-forming dwarfs, occupying the lowest $L_\mathrm{TIR}$ and $M_\mathrm{dust}$ regimes seen among these samples. Dust-to-gas mass ratios of $\sim$10$^{-5}$ are lower, overall, than in more massive and active galaxies, but are roughly consistent with the broken power law relation between the dust-to-gas ratio and metallicity found for other low-metallicity systems. Chemical evolution modeling suggests that these dwarf galaxies are likely forming very little dust via stars or grain growth, and have very high dust destruction rates. △ Less

Submitted 29 April, 2021; originally announced April 2021.

Comments: 26 pages, 19 figures. To be published in The Astronomical Journal

A Search for correlations between turbulence and star formation in LITTLE THINGS dwarf irregular galaxies

Authors: Deidre A. Hunter, Bruce G. Elmegreen, Haylee Archer, Caroline E. Simpson, Phil Cigan

Abstract: Turbulence has the potential for creating gas density enhancements that initiate cloud and star formation (SF), and it can be generated locally by SF. To study the connection between turbulence and SF, we looked for relationships between SF traced by FUV images, and gas turbulence traced by kinetic energy density (KED) and velocity dispersion ($v_{disp}$) in the LITTLE THINGS sample of nearby dIrr… ▽ More Turbulence has the potential for creating gas density enhancements that initiate cloud and star formation (SF), and it can be generated locally by SF. To study the connection between turbulence and SF, we looked for relationships between SF traced by FUV images, and gas turbulence traced by kinetic energy density (KED) and velocity dispersion ($v_{disp}$) in the LITTLE THINGS sample of nearby dIrr galaxies. We performed 2D cross-correlations between FUV and KED images, measured cross-correlations in annuli to produce correlation coefficients as a function of radius, and determined the cumulative distribution function of the cross correlation value. We also plotted on a pixel-by-pixel basis the locally excess KED, $v_{disp}$, and HI mass surface density, $Σ_{\rm HI}$, as determined from the respective values with the radial profiles subtracted, versus the excess SF rate density $Σ_{\rm SFR}$, for all regions with positive excess $Σ_{\rm SFR}$. We found that $Σ_{\rm SFR}$ and KED are poorly correlated. The excess KED associated with SF implies a $\sim0.5$% efficiency for supernova energy to pump local HI turbulence on the scale of resolution here, which is a factor of $\sim2$ too small for all of the turbulence on a galactic scale. The excess $v_{disp}$ in SF regions is also small, only $\sim0.37$ km s$^{-1}$. The local excess in $Σ_{\rm HI}$ corresponding to an excess in $Σ_{\rm SFR}$ is consistent with an HI consumption time of $\sim1.6$ Gyr in the inner parts of the galaxies. The similarity between this timescale and the consumption time for CO implies that CO-dark molecular gas has comparable mass to HI in the inner disks. △ Less

Submitted 29 January, 2021; originally announced February 2021.

Comments: In press in the Astronomical Journal

Strategic Argumentation Dialogues for Persuasion: Framework and Experiments Based on Modelling the Beliefs and Concerns of the Persuadee

Authors: Emmanuel Hadoux, Anthony Hunter, Sylwia Polberg

Abstract: Persuasion is an important and yet complex aspect of human intelligence. When undertaken through dialogue, the deployment of good arguments, and therefore counterarguments, clearly has a significant effect on the ability to be successful in persuasion. Two key dimensions for determining whether an argument is good in a particular dialogue are the degree to which the intended audience believes the… ▽ More Persuasion is an important and yet complex aspect of human intelligence. When undertaken through dialogue, the deployment of good arguments, and therefore counterarguments, clearly has a significant effect on the ability to be successful in persuasion. Two key dimensions for determining whether an argument is good in a particular dialogue are the degree to which the intended audience believes the argument and counterarguments, and the impact that the argument has on the concerns of the intended audience. In this paper, we present a framework for modelling persuadees in terms of their beliefs and concerns, and for harnessing these models in optimizing the choice of move in persuasion dialogues. Our approach is based on the Monte Carlo Tree Search which allows optimization in real-time. We provide empirical results of a study with human participants showing that our automated persuasion system based on this technology is superior to a baseline system that does not take the beliefs and concerns into account in its strategy. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: The Data Appendix containing the arguments, argument graphs, assignment of concerns to arguments, preferences over concerns, and assignment of beliefs to arguments, is available at the link http://www0.cs.ucl.ac.uk/staff/a.hunter/papers/unistudydata.zip The code is available at https://github.com/ComputationalPersuasion/MCCP

Relationships between the Stellar, Gaseous, and Star Formation Disks in LITTLE THINGS Dwarf Irregular Galaxies: Indirect Evidence for Substantial Fractions of Dark Molecular Gas

Authors: Deidre A. Hunter, Bruce G. Elmegreen, Esther Goldberger, Hannah Taylor, Anton I. Ermakov, Kimberly A. Herrmann, Se-Heon Oh, Bradley Malko, Brian Barandi, Ryan Jundt

Abstract: The stellar, gaseous and young stellar disks in the LITTLE THINGS sample of nearby dIrrs are fitted with functions to search for correlations between the parameters. We find that the HI radial profiles are generally flatter in the center and fall faster in the outer regions than the V-band profiles, while young stars are more centrally concentrated, especially if the HI is more centrally flat. Thi… ▽ More The stellar, gaseous and young stellar disks in the LITTLE THINGS sample of nearby dIrrs are fitted with functions to search for correlations between the parameters. We find that the HI radial profiles are generally flatter in the center and fall faster in the outer regions than the V-band profiles, while young stars are more centrally concentrated, especially if the HI is more centrally flat. This pattern suggests that the HI is turning into molecules in the center and the molecular clouds are forming stars and FUV. A model that assumes the molecular surface density is proportional to the total gas surface density to a power of 1.5 or 2, in analogy with the Kennicutt-Schmidt relation, reproduces the relationship between the ratio of the visible to the HI scale length and the HI Sersic index. The molecular fraction is estimated as a function of radius for each galaxy by converting the FUV to a molecular surface density using conventional calibrations. The average molecular fraction inside 3R_D is 23+/-17%. However, the break in the stellar surface brightness profile has no unified tracer related to star formation. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Comments: In press in the Astronomical Journal

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

The Blue Compact Dwarf Galaxy VCC 848 Formed by Dwarf-Dwarf Merging: HI Gas, Star Formation and Numerical Simulations

Authors: Hong-Xin Zhang, Rory Smith, Se-Heon Oh, Sanjaya Paudel, Pierre-Alain Duc, Alessandro Boselli, Patrick Cote, Laura Ferrarese, Yu Gao, Deidre A. Hunter, Thomas H. Puzia, Eric W. Peng, Yu Rong, Jihye Shin, Yinghe Zhao

Abstract: A clear link between a dwarf-dwarf merger event and enhanced star formation (SF) in the recent past was recently identified in the gas-dominated merger remnant VCC 848, offering by far the clearest view of a gas-rich late-stage dwarf-dwarf merger. We present a joint analysis of JVLA HI emission-line mapping, optical imaging and numerical simulations of VCC 848, in order to examine the impact of th… ▽ More A clear link between a dwarf-dwarf merger event and enhanced star formation (SF) in the recent past was recently identified in the gas-dominated merger remnant VCC 848, offering by far the clearest view of a gas-rich late-stage dwarf-dwarf merger. We present a joint analysis of JVLA HI emission-line mapping, optical imaging and numerical simulations of VCC 848, in order to examine the impact of the merger on the stellar and gaseous distributions. VCC 848 has less than 30% of its HI gas concentrated within the central high-surface-brightness star-forming region, while the remaining HI is entrained in outlying tidal features. Particularly, a well-defined tidal arm reaches N(HI) comparable to the galaxy center but lacks SF. The molecular gas mass inferred from the current SF rate (SFR) dominates over the atomic gas mass in the central ~ 1.5 kpc. VCC 848 is consistent with being a main-sequence star-forming galaxy for its current stellar mass and SFR. The HII region luminosity distribution largely agrees with that of normal dwarf irregulars with similar luminosities, except that the brightest HII region is extraordinarily luminous. Our N-body/hydrodynamical simulations imply that VCC 848 is a merger between a gas-dominated primary progenitor and a gas-bearing star-dominated secondary. The progenitors had their first passage on a near-radial non-coplanar orbit more than 1 Gyr ago. The merger did not build up a core as compact as typical compact dwarfs with centralized starburst, which may be partly ascribed to the star-dominated nature of the secondary, and in a general sense, a negative stellar feedback following intense starbursts triggered at early stages of the merger. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: 25 pages, 14 figures, accepted by ApJ

Direct evidence for flat bands in twisted bilayer graphene from nano-ARPES

Authors: Simone Lisi, Xiaobo Lu, Tjerk Benschop, Tobias A. de Jong, Petr Stepanov, Jose R. Duran, Florian Margot, Irène Cucchi, Edoardo Cappelli, Andrew Hunter, Anna Tamai, Viktor Kandyba, Alessio Giampietri, Alexei Barinov, Johannes Jobst, Vincent Stalman, Maarten Leeuwenhoek, Kenji Watanabe, Takashi Taniguchi, Louk Rademaker, Sense Jan van der Molen, Milan Allan, Dmitri K. Efetov, Felix Baumberger

Abstract: Transport experiments in twisted bilayer graphene revealed multiple superconducting domes separated by correlated insulating states. These properties are generally associated with strongly correlated states in a flat mini-band of the hexagonal moiré superlattice as it was predicted by band structure calculations. Evidence for such a flat band comes from local tunneling spectroscopy and electronic… ▽ More Transport experiments in twisted bilayer graphene revealed multiple superconducting domes separated by correlated insulating states. These properties are generally associated with strongly correlated states in a flat mini-band of the hexagonal moiré superlattice as it was predicted by band structure calculations. Evidence for such a flat band comes from local tunneling spectroscopy and electronic compressibility measurements, reporting two or more sharp peaks in the density of states that may be associated with closely spaced van Hove singularities. Direct momentum resolved measurements proved difficult though. Here, we combine different imaging techniques and angle resolved photoemission with simultaneous real and momentum space resolution (nano-ARPES) to directly map the band dispersion in twisted bilayer graphene devices near charge neutrality. Our experiments reveal large areas with homogeneous twist angle that support a flat band with spectral weight that is highly localized in momentum space. The flat band is separated from the dispersive Dirac bands which show multiple moiré hybridization gaps. These data establish the salient features of the twisted bilayer graphene band structure. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Comments: Submitted to Nature Materials. Nat. Phys. (2020)

Accelerating High-Strain Continuum-Scale Brittle Fracture Simulations with Machine Learning

Authors: M. Giselle Fernández-Godino, Nishant Panda, Daniel O'Malley, Kevin Larkin, Abigail Hunter, Raphael T. Haftka, Gowri Srinivasan

Abstract: Failure in brittle materials under dynamic loading conditions is a result of the propagation and coalescence of microcracks. Simulating this mechanism at the continuum level is computationally expensive or, in some cases, intractable. The computational cost is due to the need for highly resolved computational meshes required to capture complex crack growth behavior, such as branching, turning, etc… ▽ More Failure in brittle materials under dynamic loading conditions is a result of the propagation and coalescence of microcracks. Simulating this mechanism at the continuum level is computationally expensive or, in some cases, intractable. The computational cost is due to the need for highly resolved computational meshes required to capture complex crack growth behavior, such as branching, turning, etc. Typically, continuum-scale models that account for brittle damage evolution homogenize the crack network in some way, which reduces the overall computational cost, but can also neglect key physics of the subgrid crack growth behavior, sacrificing accuracy for efficiency. We have developed an approach using machine learning that overcomes the current inability to represent micro-scale physics at the macro-scale. Our approach leverages damage and stress data from a high-fidelity model that explicitly resolves microcrack behavior to build an inexpensive machine learning emulator, which runs in seconds as opposed to the high-fidelity model, which takes hours. Once trained, the machine learning emulator is used to predict the evolution of crack length statistics. A continuum-scale constitutive model is then informed with these crack statistics, speeding up the workflow by four orders of magnitude. Both the machine learning model and the continuum-scale model are validated against a high-fidelity model and experimental data, respectively, showing excellent agreement. There are two key findings. The first is that we can reduce the dimensionality of the problem, establishing that the machine learning emulator only needs the length of the longest crack and one of the maximum stress components to capture the necessary physics. Another compelling finding is that the emulator can be trained in one experimental setting and transferred successfully to predict behavior in a different setting. △ Less

Submitted 12 May, 2020; v1 submitted 8 January, 2020; originally announced January 2020.

Comments: Keywords: Computational Material Science, Machine Learning. 27 pages,13 figures, in review at COMMAT Elsevier journal

Report number: LA-UR-20-20148

Journal ref: Computational Materials Science, Elsevier, Volume 186, January 2021, p. 109959

Analytic model of the remobilization of pinned glide dislocations: including dislocation drag from phonon wind

Authors: Daniel N. Blaschke, Abigail Hunter, Dean L. Preston

Abstract: In this paper we discuss the effect of a non-constant dislocation drag coefficient on the very high strain rate regime within an analytic model describing mobile-immobile dislocation intersections applicable to polycrystals. Based on previous work on dislocation drag, we estimate its temperature and pressure dependence and its effects on stress-strain rate relations. In the high temperature regime… ▽ More In this paper we discuss the effect of a non-constant dislocation drag coefficient on the very high strain rate regime within an analytic model describing mobile-immobile dislocation intersections applicable to polycrystals. Based on previous work on dislocation drag, we estimate its temperature and pressure dependence and its effects on stress-strain rate relations. In the high temperature regime, we show that drag can remain the dominating effect even down to intermediate strain rates. We also discuss the consequences of having a limiting dislocation velocity, a feature which is typically predicted by analytic models of dislocation drag, but which is somewhat under debate because a number of MD simulations predict supersonic dislocations. △ Less

Submitted 2 March, 2020; v1 submitted 18 December, 2019; originally announced December 2019.

Comments: 26 pages, 11 figures; v2 minor revision

Report number: LA-UR-19-26796

Journal ref: Int. J. Plast. 131 (2020) 102750

H$α$ Morphologies of Star Clusters: A LEGUS study of HII region evolution timescales and stochasticity in low mass clusters

Authors: Stephen Hannon, Janice C. Lee, B. C. Whitmore, R. Chandar, A. Adamo, B. Mobasher, A. Aloisi, D. Calzetti, M. Cignoni, D. O. Cook, D. Dale, S. Deger, L. Della Bruna, D. M. Elmegreen, D. A. Gouliermis, K. Grasha, E. K. Grebel, A. Herrero, D. A. Hunter, K. E. Johnson, R. Kennicutt, H. Kim, E. Sacchi, L. Smith, D. Thilker , et al. (3 additional authors not shown)

Abstract: The morphology of HII regions around young star clusters provides insight into the timescales and physical processes that clear a cluster's natal gas. We study ~700 young clusters (<10Myr) in three nearby spiral galaxies (NGC 7793, NGC 4395, and NGC 1313) using Hubble Space Telescope (HST) imaging from LEGUS (Legacy ExtraGalactic Ultraviolet Survey). Clusters are classified by their H$α$ morpholog… ▽ More The morphology of HII regions around young star clusters provides insight into the timescales and physical processes that clear a cluster's natal gas. We study ~700 young clusters (<10Myr) in three nearby spiral galaxies (NGC 7793, NGC 4395, and NGC 1313) using Hubble Space Telescope (HST) imaging from LEGUS (Legacy ExtraGalactic Ultraviolet Survey). Clusters are classified by their H$α$ morphology (concentrated, partially exposed, no-emission) and whether they have neighboring clusters (which could affect the clearing timescales). Through visual inspection of the HST images, and analysis of ages, reddenings, and stellar masses from spectral energy distributions fitting, together with the (U-B), (V-I) colors, we find: 1) the median ages indicate a progression from concentrated (~3 Myr), to partially exposed (~4 Myr), to no H$α$ emission (>5Myr), consistent with the expected temporal evolution of HII regions and previous results. However, 2) similarities in the age distributions for clusters with concentrated and partially exposed H$α$ morphologies imply a short timescale for gas clearing (<1Myr). 3) our cluster sample's median mass is ~1000 M, and a significant fraction (~20%) contain one or more bright red sources (presumably supergiants), which can mimic reddening effects. Finally, 4) the median E(B-V) values for clusters with concentrated H$α$ and those without H$α$ emission appear to be more similar than expected (~0.18 vs. ~0.14, respectively), but when accounting for stochastic effects, clusters without H$α$ emission are less reddened. To mitigate stochastic effects, we experiment with synthesizing more massive clusters by stacking fluxes of clusters within each H$α$ morphological class. Composite isolated clusters also reveal a color and age progression for H$α$ morphological classes, consistent with analysis of the individual clusters. △ Less

Submitted 9 October, 2019; v1 submitted 7 October, 2019; originally announced October 2019.

Comments: 20 pages, 16 figures, 7 tables; accepted for publication in MNRAS

A 3D phase field dislocation dynamics model for body-centered cubic crystals

Authors: Xiaoyao Peng, Nithin Mathew, Irene J. Beyerlein, Kaushik Dayal, Abigail Hunter

Abstract: In this work, we present a 3D Phase Field Dislocation Dynamics (PFDD) model for body-centered cubic (BCC) metals. The model formulation is extended to account for the dependence of the Peierls barrier on the line-character of the dislocation. Simulations of the expansion of a dislocation loop belonging to the $\left\{110\right\} \left<111\right>$ slip system are presented with direct comparison to… ▽ More In this work, we present a 3D Phase Field Dislocation Dynamics (PFDD) model for body-centered cubic (BCC) metals. The model formulation is extended to account for the dependence of the Peierls barrier on the line-character of the dislocation. Simulations of the expansion of a dislocation loop belonging to the $\left\{110\right\} \left<111\right>$ slip system are presented with direct comparison to Molecular Statics (MS) simulations. The extended PFDD model is able to capture the salient features of dislocation loop expansion predicted by MS simulations. The model is also applied to simulate the motion of a straight screw dislocation through kink-pair motion. △ Less

Submitted 22 September, 2019; originally announced September 2019.

Journal ref: Comp. Mater. Sci., 171:109217, 2020

Computer Assisted Composition in Continuous Time

Authors: Chamin Hewa Koneputugodage, Rhys Healy, Sean Lamont, Ian Mallett, Matt Brown, Matt Walters, Ushini Attanayake, Libo Zhang, Roger T. Dean, Alexander Hunter, Charles Gretton, Christian Walder

Abstract: We address the problem of combining sequence models of symbolic music with user defined constraints. For typical models this is non-trivial as only the conditional distribution of each symbol given the earlier symbols is available, while the constraints correspond to arbitrary times. Previously this has been addressed by assuming a discrete time model of fixed rhythm. We generalise to continuous t… ▽ More We address the problem of combining sequence models of symbolic music with user defined constraints. For typical models this is non-trivial as only the conditional distribution of each symbol given the earlier symbols is available, while the constraints correspond to arbitrary times. Previously this has been addressed by assuming a discrete time model of fixed rhythm. We generalise to continuous time and arbitrary rhythm by introducing a simple, novel, and efficient particle filter scheme, applicable to general continuous time point processes. Extensive experimental evaluations demonstrate that in comparison with a more traditional beam search baseline, the particle filter exhibits superior statistical properties and yields more agreeable results in an extensive human listening test experiment. △ Less

Submitted 10 September, 2019; originally announced September 2019.

Ring Rydberg Composites

Authors: Matthew T. Eiles, Andrew L. Hunter, Jan M. Rost

Abstract: The properties and behaviour of a Ring Rydberg Composite are explicated. This system consists of a ring of ground state atoms centered on a Rydberg atom, whose electron elastically scatters off the ground state atoms. We transform the electronic Hamiltonian into a discrete tight-binding representation in which the on-site energies and long-range hopping between sites are controlled and mediated by… ▽ More The properties and behaviour of a Ring Rydberg Composite are explicated. This system consists of a ring of ground state atoms centered on a Rydberg atom, whose electron elastically scatters off the ground state atoms. We transform the electronic Hamiltonian into a discrete tight-binding representation in which the on-site energies and long-range hopping between sites are controlled and mediated by the Rydberg electron. From this new representation, which to a large extent enables an analytic treatment, we derive scaling laws and analytic expressions for the wave functions and eigenspectrum. The interface between ring and Rydberg geometries leads to a range of rich properties which can be tuned as a function of ring size, number of scatterers, and principal quantum number. △ Less

Submitted 10 September, 2019; originally announced September 2019.

Rydberg Composites

Authors: Andrew L. Hunter, Matthew T. Eiles, Alex Eisfeld, Jan M. Rost

Abstract: We introduce the Rydberg Composite, a new class of Rydberg matter where a single Rydberg atom is interfaced with a dense environment of neutral ground state atoms. The properties of the Composite depend on both the Rydberg excitation, which provides the gross energetic and spatial scales, and on the distribution of ground state atoms within the volume of the Rydberg wave function, which sculpt the… ▽ More We introduce the Rydberg Composite, a new class of Rydberg matter where a single Rydberg atom is interfaced with a dense environment of neutral ground state atoms. The properties of the Composite depend on both the Rydberg excitation, which provides the gross energetic and spatial scales, and on the distribution of ground state atoms within the volume of the Rydberg wave function, which sculpt the electronic states. The latter range from the "trilobites", for small numbers of scatterers, to delocalized and chaotic eigenstates for disordered scatterer arrays, culminating in the dense scatterer limit in symmetry-dominated wave functions which promise good control in future experiments. We characterize these scenarios with different theoretical methods, enabling us to obtain scaling behavior for the regular spectrum and measures of chaos and delocalization in the disordered regime. Thus, we obtain a systematic description of the Composite states. The 2D monolayer Composite possesses the richest spectrum with an intricate band structure in the limit of homogeneous scatterers. △ Less

Submitted 3 September, 2019; originally announced September 2019.

Comments: 18 pages, 10 figures

Journal ref: Phys. Rev. X 10, 031046 (2020)

Polynomial-time Updates of Epistemic States in a Fragment of Probabilistic Epistemic Argumentation (Technical Report)

Authors: Nico Potyka, Sylwia Polberg, Anthony Hunter

Abstract: Probabilistic epistemic argumentation allows for reasoning about argumentation problems in a way that is well founded by probability theory. Epistemic states are represented by probability functions over possible worlds and can be adjusted to new beliefs using update operators. While the use of probability functions puts this approach on a solid foundational basis, it also causes computational cha… ▽ More Probabilistic epistemic argumentation allows for reasoning about argumentation problems in a way that is well founded by probability theory. Epistemic states are represented by probability functions over possible worlds and can be adjusted to new beliefs using update operators. While the use of probability functions puts this approach on a solid foundational basis, it also causes computational challenges as the amount of data to process depends exponentially on the number of arguments. This leads to bottlenecks in applications such as modelling opponent's beliefs for persuasion dialogues. We show how update operators over probability functions can be related to update operators over much more compact representations that allow polynomial-time updates. We discuss the cognitive and probabilistic-logical plausibility of this approach and demonstrate its applicability in computational persuasion. △ Less

Submitted 12 June, 2019; originally announced June 2019.

Gas engaged in noncircular motions in LITTLE THINGS dwarf irregular galaxies

Authors: Deidre A. Hunter, Lauren Laufman, Se-Heon Oh, Stephen E. Levine, Caroline E. Simpson

Abstract: We have examined gas engaged in noncircular motions in 22 of the nearby LITTLE THINGS dwarf irregular galaxies. The HI data cubes have been deconvolved into kinematic components - bulk rotation and noncircular motions, to produce maps of integrated gas, velocity field, and velocity dispersion in the different components. We found significant regions of gas engaged in noncircular motions in half of… ▽ More We have examined gas engaged in noncircular motions in 22 of the nearby LITTLE THINGS dwarf irregular galaxies. The HI data cubes have been deconvolved into kinematic components - bulk rotation and noncircular motions, to produce maps of integrated gas, velocity field, and velocity dispersion in the different components. We found significant regions of gas engaged in noncircular motions in half of the galaxies, involving 1%-20% of the total HI mass of the galaxy. In one galaxy we found a pattern in the velocity field that is characteristic of streaming motions around the stellar bar potential and star formation at the end of bar. Two galaxies have large-scale filamentary structures found in their outer disks, and these filaments could be transient instabilities in the gas. We found no spatial correlation between noncircular motion gas and enhanced star formation. We found noncircular motion gas in only one galaxy associated with higher HI velocity dispersion. △ Less

Submitted 16 May, 2019; originally announced May 2019.

Comments: In press in AJ

Impact of Argument Type and Concerns in Argumentation with a Chatbot

Authors: Lisa A. Chalaguine, Anthony Hunter, Fiona L. Hamilton, Henry W. W. Potts

Abstract: Conversational agents, also known as chatbots, are versatile tools that have the potential of being used in dialogical argumentation. They could possibly be deployed in tasks such as persuasion for behaviour change (e.g. persuading people to eat more fruit, to take regular exercise, etc.) However, to achieve this, there is a need to develop methods for acquiring appropriate arguments and counterar… ▽ More Conversational agents, also known as chatbots, are versatile tools that have the potential of being used in dialogical argumentation. They could possibly be deployed in tasks such as persuasion for behaviour change (e.g. persuading people to eat more fruit, to take regular exercise, etc.) However, to achieve this, there is a need to develop methods for acquiring appropriate arguments and counterargument that reflect both sides of the discussion. For instance, to persuade someone to do regular exercise, the chatbot needs to know counterarguments that the user might have for not doing exercise. To address this need, we present methods for acquiring arguments and counterarguments, and importantly, meta-level information that can be useful for deciding when arguments can be used during an argumentation dialogue. We evaluate these methods in studies with participants and show how harnessing these methods in a chatbot can make it more persuasive. △ Less

Submitted 2 May, 2019; originally announced May 2019.

HI Clouds in LITTLE THINGS Dwarf Irregular Galaxies

Authors: Deidre A. Hunter, Bruce G. Elmegreen, Clara L. Berger

Abstract: We identify 814 discrete HI clouds in 40 dwarf irregular galaxies from the LITTLE THINGS survey using an automated cloud-finding algorithm. The cloud masses range from ~10^3 to 10^7 Msolar, have a surface density averaged over all of the clouds of ~9.65 Msolar/pc^2, and constitute 2-53% of the total HI mass of the host galaxy. For individual clouds, the mass including He varies with cloud radius a… ▽ More We identify 814 discrete HI clouds in 40 dwarf irregular galaxies from the LITTLE THINGS survey using an automated cloud-finding algorithm. The cloud masses range from ~10^3 to 10^7 Msolar, have a surface density averaged over all of the clouds of ~9.65 Msolar/pc^2, and constitute 2-53% of the total HI mass of the host galaxy. For individual clouds, the mass including He varies with cloud radius as log M_{gas} = (2.11\pm0.04)x log R_{cl}+(0.78\pm0.08) and the internal velocity dispersion varies as log V_{disp} = 0.5xlog R_{cl}-0.57\pm0.21. The HI clouds tend to be in the outer regions of the galaxies, with 72% of the galaxies having more than 70% of their clouds outside one disk scale length, and 32% of the galaxies having more than 50% of their clouds outside the radius encircling the HII emission. 36% of the clouds are essentially non-self-gravitating from HI alone, with a virial parameter that exceeds alpha_{vir}~10, and 5% have alpha_{vir}\le2. We estimate the missing molecular mass, based on the total star formation rate and a typical molecular consumption time of 2 Gyr, as observed in CO-rich galaxies. The resulting molecular fraction has a value averaged over the galaxies of 0.23 and correlates with both the surface density of star formation and the fraction of HI clouds in the outer regions. We conclude that a significant fraction of the inner parts of these dwarf galaxy disks is in the form of dark molecular gas, and that this fraction could be high enough to make the inner disks mildly gravitationally unstable as a precursor to star formation. △ Less

Submitted 30 April, 2019; originally announced April 2019.

Comments: In press in AJ

Star Cluster Catalogs for the LEGUS Dwarf Galaxies

Authors: D. O. Cook, J. C. Lee, A. Adamo, H. Kim, R. Chandar, B. C. Whitmore, A. Mok, J. E. Ryon, D. A. Dale, D. Calzetti, J. E. Andrews, A. Aloisi, G. Ashworth, S. N. Bright, T. M. Brown, C. Christian, M. Cignoni, G. C. Clayton, R. da Silva, S. E. de Mink, C. L. Dobbs, B. G. Elmegreen, D. M. Elmegreen, A. S. Evans, M. Fumagalli , et al. (40 additional authors not shown)

Abstract: We present the star cluster catalogs for 17 dwarf and irregular galaxies in the $HST$ Treasury Program "Legacy ExtraGalactic UV Survey" (LEGUS). Cluster identification and photometry in this subsample are similar to that of the entire LEGUS sample, but special methods were developed to provide robust catalogs with accurate fluxes due to low cluster statistics. The colors and ages are largely consi… ▽ More We present the star cluster catalogs for 17 dwarf and irregular galaxies in the $HST$ Treasury Program "Legacy ExtraGalactic UV Survey" (LEGUS). Cluster identification and photometry in this subsample are similar to that of the entire LEGUS sample, but special methods were developed to provide robust catalogs with accurate fluxes due to low cluster statistics. The colors and ages are largely consistent for two widely used aperture corrections, but a significant fraction of the clusters are more compact than the average training cluster. However, the ensemble luminosity, mass, and age distributions are consistent suggesting that the systematics between the two methods are less than the random errors. When compared with the clusters from previous dwarf galaxy samples, we find that the LEGUS catalogs are more complete and provide more accurate total fluxes. Combining all clusters into a composite dwarf galaxy, we find that the luminosity and mass functions can be described by a power law with the canonical index of $-2$ independent of age and global SFR binning. The age distribution declines as a power law, with an index of $\approx-0.80\pm0.15$, independent of cluster mass and global SFR binning. This decline of clusters is dominated by cluster disruption since the combined star formation histories and integrated-light SFRs are both approximately constant over the last few hundred Myr. Finally, we find little evidence for an upper-mass cutoff ($<2σ$) in the composite cluster mass function, and can rule out a truncation mass below $\approx10^{4.5}$M$_{\odot}$ but cannot rule out the existence of a truncation at higher masses. △ Less

Submitted 31 January, 2019; originally announced February 2019.

Comments: 25 pages; 28 figures (Accepted to MNRAS)