Showing 1–50 of 147 results for author: Gupta, Y

Effect of ground-state deformation on the Isoscalar Giant Monopole Resonance and the first observation of overtones of the Isoscalar Giant Quadrupole Resonance in rare-earth Nd isotopes

Authors: M. Abdullah, S. Bagchi, M. N. Harakeh, H. Akimune, D. Das, T. Doi, L. M. Donaldson, Y. Fujikawa, M. Fujiwara, T. Furuno, U. Garg, Y. K. Gupta, K. B. Howard, Y. Hijikata, K. Inaba, S. Ishida, M. Itoh, N. Kalantar-Nayestanaki, D. Kar, T. Kawabata, S. Kawashima, K. Khokhar, K. Kitamura, N. Kobayashi, Y. Matsuda , et al. (11 additional authors not shown)

Abstract: The strength distributions of the Isoscalar Giant Monopole Resonance (ISGMR) and Isoscalar Giant Quadrupole Resonance (ISGQR) in 142,146-150Nd have been determined via inelastic alpha-particle scattering with the Grand Raiden (GR) Spectrometer at the Research Center for Nuclear Physics (RCNP), Japan. In the deformed nuclei 146-150Nd, the ISGMR strength distributions exhibit a splitting into two co… ▽ More The strength distributions of the Isoscalar Giant Monopole Resonance (ISGMR) and Isoscalar Giant Quadrupole Resonance (ISGQR) in 142,146-150Nd have been determined via inelastic alpha-particle scattering with the Grand Raiden (GR) Spectrometer at the Research Center for Nuclear Physics (RCNP), Japan. In the deformed nuclei 146-150Nd, the ISGMR strength distributions exhibit a splitting into two components, while the nearly spherical nucleus 142Nd displays a single peak in the ISGMR strength distribution. A noteworthy achievement in this study is the first-time detection of overtones in the Isoscalar Giant Quadrupole Resonance (ISGQR) strength distributions within Nd isotopes at an excitation energy around 25 MeV obtained through Multipole Decomposition Analysis (MDA). △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: Accepted for publication in Physics Letters B

Observation of ternary proton emission in heavy-ion induced fission

Authors: Pawan Singh, Y. K. Gupta, G. K. Prajapati, B. N. Joshi, V. G. Prajapati, N. Sirswal, K. Ramachandran, A. S. Pradeep, V. S. Dagre, M. Kumar, A. Jhingan, N. Deshmukh, B. V. John, B. K. Nayak, D. C. Biswas, R. K. Choudhury

Abstract: Proton and $α$-particle energy spectra were measured in coincidence with fission fragments in $^{16}$O (96 MeV) + $^{232}$Th reaction. The multiplicity spectra were analyzed within the framework of a Moving Source Disentangling Analysis (MSDA) to determine contributions from different emission stages. The MSDA conclusively shows "ternary proton emission" as an essential component in the proton mul… ▽ More Proton and $α$-particle energy spectra were measured in coincidence with fission fragments in $^{16}$O (96 MeV) + $^{232}$Th reaction. The multiplicity spectra were analyzed within the framework of a Moving Source Disentangling Analysis (MSDA) to determine contributions from different emission stages. The MSDA conclusively shows "ternary proton emission" as an essential component in the proton multiplicity spectra akin to ternary $α$ particles. It is the first time that "ternary proton emission" has been disentangled unambiguously from pre-scission emission in heavy-ion induced fission. Inverse trajectory calculations were performed, showing that experimentally observed Total Kinetic Energy (TKE) and kinetic energies of both ternary $α$ particles and protons are well reproduced simultaneously by a common scission configuration. Thus, the scission stage parameters of a fissioning nucleus have been obtained, showing quantitatively that the scission configuration is significantly stretched in ternary- than the binary-fission. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Fine Tuning LLM for Enterprise: Practical Guidelines and Recommendations

Authors: Mathav Raj J, Kushala VM, Harikrishna Warrier, Yogesh Gupta

Abstract: There is a compelling necessity from enterprises for fine tuning LLMs (Large Language Models) o get them trained on proprietary domain knowledge. The challenge is to imbibe the LLMs with domain specific knowledge using the most optimial resource and cost and in the best possible time. Many enterprises rely on RAG (Retrieval Augmented Generation) which does not need LLMs to be ine-tuned but they ar… ▽ More There is a compelling necessity from enterprises for fine tuning LLMs (Large Language Models) o get them trained on proprietary domain knowledge. The challenge is to imbibe the LLMs with domain specific knowledge using the most optimial resource and cost and in the best possible time. Many enterprises rely on RAG (Retrieval Augmented Generation) which does not need LLMs to be ine-tuned but they are limited by the quality of vector databases and their retrieval capabilities rather than the intrinsic capabilities of the LLMs themselves. In our current work we focus on fine tuning LLaMA, an open source LLM using proprietary documents and code from an enterprise repository and use the fine tuned models to evaluate the quality of responses. As part of this work, we aim to guide beginners on how to start with fine tuning an LLM for documentation and code by making educated guesses on size of GPU required and options that are available for formatting the data. We also propose pre processing recipes for both documentation and code to prepare dataset in different formats. The proposed methods of data preparation for document datasets are forming paragraph chunks, forming question and answer pairs and forming keyword and paragraph chunk pairs. For code dataset we propose forming summary and function pairs. Further, we qualitatively evaluate the results of the models for domain specific queries. Finally, we also propose practical guidelines and recommendations for fine tuning LLMs. △ Less

Submitted 23 March, 2024; originally announced April 2024.

Comments: 17 pages, 12 tables, 3 figures

Benchmarking with MIMIC-IV, an irregular, spare clinical time series dataset

Authors: Hung Bui, Harikrishna Warrier, Yogesh Gupta

Abstract: Electronic health record (EHR) is more and more popular, and it comes with applying machine learning solutions to resolve various problems in the domain. This growing research area also raises the need for EHRs accessibility. Medical Information Mart for Intensive Care (MIMIC) dataset is a popular, public, and free EHR dataset in a raw format that has been used in numerous studies. However, despit… ▽ More Electronic health record (EHR) is more and more popular, and it comes with applying machine learning solutions to resolve various problems in the domain. This growing research area also raises the need for EHRs accessibility. Medical Information Mart for Intensive Care (MIMIC) dataset is a popular, public, and free EHR dataset in a raw format that has been used in numerous studies. However, despite of its popularity, it is lacking benchmarking work, especially with recent state of the art works in the field of deep learning with time-series tabular data. The aim of this work is to fill this lack by providing a benchmark for latest version of MIMIC dataset, MIMIC-IV. We also give a detailed literature survey about studies that has been already done for MIIMIC-III. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 7 pages, 1 figure, 3 tables

Comments regarding Transonic dislocation propagation in diamond by Katagiri, et al. (Science 382, 69-72, 2023)

Authors: James A. Hawreliak, J. M. Winey, Surinder. M. Sharma, Yogendra M. Gupta

Abstract: We have carefully examined the above-referenced paper and find the claims of stacking fault formation and transonic dislocation propagation in diamond to be not valid. Additionally, it is quite puzzling that 14 authors on this paper are also co-authors on another recent paper that directly conflicts with the dislocation claims in the Science paper. We have carefully examined the above-referenced paper and find the claims of stacking fault formation and transonic dislocation propagation in diamond to be not valid. Additionally, it is quite puzzling that 14 authors on this paper are also co-authors on another recent paper that directly conflicts with the dislocation claims in the Science paper. △ Less

Submitted 8 January, 2024; originally announced January 2024.

Comments: 11 pages, 3 figures

Progressive Knowledge Distillation Of Stable Diffusion XL Using Layer Level Loss

Authors: Yatharth Gupta, Vishnu V. Jaddipal, Harish Prabhala, Sayak Paul, Patrick Von Platen

Abstract: Stable Diffusion XL (SDXL) has become the best open source text-to-image model (T2I) for its versatility and top-notch image quality. Efficiently addressing the computational demands of SDXL models is crucial for wider reach and applicability. In this work, we introduce two scaled-down variants, Segmind Stable Diffusion (SSD-1B) and Segmind-Vega, with 1.3B and 0.74B parameter UNets, respectively,… ▽ More Stable Diffusion XL (SDXL) has become the best open source text-to-image model (T2I) for its versatility and top-notch image quality. Efficiently addressing the computational demands of SDXL models is crucial for wider reach and applicability. In this work, we introduce two scaled-down variants, Segmind Stable Diffusion (SSD-1B) and Segmind-Vega, with 1.3B and 0.74B parameter UNets, respectively, achieved through progressive removal using layer-level losses focusing on reducing the model size while preserving generative quality. We release these models weights at https://hf.co/Segmind. Our methodology involves the elimination of residual networks and transformer blocks from the U-Net structure of SDXL, resulting in significant reductions in parameters, and latency. Our compact models effectively emulate the original SDXL by capitalizing on transferred knowledge, achieving competitive results against larger multi-billion parameter SDXL. Our work underscores the efficacy of knowledge distillation coupled with layer-level losses in reducing model size while preserving the high-quality generative capabilities of SDXL, thus facilitating more accessible deployment in resource-constrained environments. △ Less

Submitted 5 January, 2024; originally announced January 2024.

Digital Divide in Disasters: Investigating Spatial and Socioeconomic Disparities in Internet Service Disruptions During Extreme Weather Events

Authors: Yuvraj Gupta, Zhewei Liu, Ali Mostafavi

Abstract: The resilience of internet service is crucial for ensuring consistent communication, facilitating emergency response in digitally-dependent society. Due to empirical data constraints, there has been limited research on internet service disruptions during extreme weather events. To bridge this gap, this study utilizes observational datasets on internet performance to quantitatively assess extent of… ▽ More The resilience of internet service is crucial for ensuring consistent communication, facilitating emergency response in digitally-dependent society. Due to empirical data constraints, there has been limited research on internet service disruptions during extreme weather events. To bridge this gap, this study utilizes observational datasets on internet performance to quantitatively assess extent of internet disruption during two recent extreme weather events. Taking Harris County in United States as study region, we jointly analyzed the hazard severity and the associated internet disruptions in two extreme weather events. The results show that hazard events significantly impacted regional internet connectivity. There exists a pronounced temporal synchronicity between magnitude of disruption and hazard severity: as severity of hazards intensifies, internet disruptions correspondingly escalate, and eventually return to baseline levels post-event. Spatial analyses show internet service disruptions can happen even in areas not directly impacted by hazards, demonstrating that repercussions of hazards extend beyond immediate area of impact. This interplay of temporal synchronization and spatial variance underscores complex relationships between hazard severity and Internet disruption. Socio-demographic analysis suggests vulnerable communities, already grappling with myriad challenges, face exacerbated service disruptions during hazard events, emphasizing the need for prioritized disaster mitigation strategiesfor improving the resilience of internet services. To the best of our knowledge, this research is among the first studies to examine the Internet disruptions during hazardous events using a quantitative observational dataset. Insights obtained hold significant implications for city administrators, guiding them towards more resilient and equitable infrastructure planning. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Low-frequency pulse-jitter measurement with the uGMRT I : PSR J0437$-$4715

Authors: Tomonosuke Kikunaga, Shinnosuke Hisano, Neelam Dhanda Batra, Shantanu Desai, Bhal Chandra Joshi, Manjari Bagchi, T. Prabu, Keitaro Takahashi, Swetha Arumugam, Adarsh Bathula, Subhajit Dandapat, Debabrata Deb, Churchil Dwivedi, Yashwant Gupta, Shebin Jose Jacob, Fazal Kareem, Nobleson K, Pragna Mamidipaka, Avinash Kumar Paladi, Arul Pandian B, Prerna Rana, Jaikhomba Singha, Aman Srivastava, Mayuresh Surnis, Pratik Tarafdar

Abstract: High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of… ▽ More High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of the Indian Pulsar Timing Array experiment. We were able to detect jitter in both the 300 - 500 MHz and 1260 - 1460 MHz observations of the upgraded Giant Metrewave Radio Telescope (uGMRT). The former is the first jitter measurement for this pulsar below 700 MHz, and the latter is in good agreement with results from previous studies. In addition, at 300 - 500 MHz, we investigated the frequency dependence of the jitter by calculating the jitter for each sub-banded arrival time of pulses. We found that the jitter amplitude increases with frequency. This trend is opposite as compared to previous studies, indicating that there is a turnover at intermediate frequencies. It will be possible to investigate this in more detail with uGMRT observations at 550 - 750 MHz and future high sensitive wideband observations from next generation telescopes, such as the Square Kilometre Array. We also explored the effect of jitter on the high precision dispersion measure (DM) measurements derived from short duration observations. We find that even though the DM precision will be better at lower frequencies due to the smaller amplitude of jitter noise, it will limit the DM precision for high signal-to-noise observations, which are of short durations. This limitation can be overcome by integrating for a long enough duration optimised for a given pulsar. △ Less

Submitted 18 April, 2024; v1 submitted 4 December, 2023; originally announced December 2023.

Comments: 13 pages, 12 figures, 3 tables, accepted for Publication of the Astronomical Society of Australia

Responsible AI (RAI) Games and Ensembles

Authors: Yash Gupta, Runtian Zhai, Arun Suggala, Pradeep Ravikumar

Abstract: Several recent works have studied the societal effects of AI; these include issues such as fairness, robustness, and safety. In many of these objectives, a learner seeks to minimize its worst-case loss over a set of predefined distributions (known as uncertainty sets), with usual examples being perturbed versions of the empirical distribution. In other words, aforementioned problems can be written… ▽ More Several recent works have studied the societal effects of AI; these include issues such as fairness, robustness, and safety. In many of these objectives, a learner seeks to minimize its worst-case loss over a set of predefined distributions (known as uncertainty sets), with usual examples being perturbed versions of the empirical distribution. In other words, aforementioned problems can be written as min-max problems over these uncertainty sets. In this work, we provide a general framework for studying these problems, which we refer to as Responsible AI (RAI) games. We provide two classes of algorithms for solving these games: (a) game-play based algorithms, and (b) greedy stagewise estimation algorithms. The former class is motivated by online learning and game theory, whereas the latter class is motivated by the classical statistical literature on boosting, and regression. We empirically demonstrate the applicability and competitive performance of our techniques for solving several RAI problems, particularly around subpopulation shift. △ Less

Submitted 28 October, 2023; originally announced October 2023.

Single pulse polarization study of pulsars B0950+08 and B1642-03: micropulse properties and mixing of orthogonal modes

Authors: Shubham Singh, Yashwant Gupta, Kishalay De

Abstract: We present the results of a high-time resolution polarization study of single pulses from pulsars B0950+08 and B1642-03. Single pulses from pulsar B0950+08 sometimes show isolated micropulses without any significant associated subpulse emission. Assuming that the properties of such micropulses represent the intrinsic nature of micropulse emission, we characterize the width and polarization propert… ▽ More We present the results of a high-time resolution polarization study of single pulses from pulsars B0950+08 and B1642-03. Single pulses from pulsar B0950+08 sometimes show isolated micropulses without any significant associated subpulse emission. Assuming that the properties of such micropulses represent the intrinsic nature of micropulse emission, we characterize the width and polarization properties of these `intrinsic' microstructures. Most of the `intrinsic' micropulses (~90%) follow common characteristic polarization properties, while the average width of these micropulses is consistent with the general micropulse population from this pulsar. Single pulses from these pulsars show a diverse range of polarization properties, including depolarization and mixing of two orthogonal modes resulting in polarization position angle jumps. We present a superposition model of the two orthogonal modes which can explain depolarization, the observed position angle jumps, and associated changes in other polarization parameters. △ Less

Submitted 28 October, 2023; originally announced October 2023.

Comments: 12 pages, 18 figures, Accepted for publication in the Monthly Notices of the Royal Astronomical Society (MNRAS)

Using low-frequency scatter-broadening measurements for precision estimates of dispersion measures

Authors: Jaikhomba Singha, Bhal Chandra Joshi, M. A. Krishnakumar, Fazal Kareem, Adarsh Bathula, Churchil Dwivedi, Shebin Jose Jacob, Shantanu Desai, Pratik Tarafdar, P. Arumugam, Swetha Arumugam, Manjari Bagchi, Neelam Dhanda Batra, Subhajit Dandapat, Debabrata Deb, Jyotijwal Debnath, A Gopakumar, Yashwant Gupta, Shinnosuke Hisano, Ryo Kato, Tomonosuke Kikunaga, Piyush Marmat, K. Nobleson, Avinash K. Paladi, Arul Pandian B. , et al. (6 additional authors not shown)

Abstract: A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method… ▽ More A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method to correct for such delays by obtaining unbiased dispersion measure (DM) measurements by using low-frequency estimates of the scattering parameters. We evaluate this method by comparing the obtained DM estimates with those, where scatter-broadening is ignored using simulated data. A bias is seen in the estimated DMs for simulated data with pulse-broadening with a larger variability for a data set with a variable frequency scaling index, $α$, as compared to that assuming a Kolmogorov turbulence. Application of the proposed method removes this bias robustly for data with band averaged signal-to-noise ratio larger than 100. We report, for the first time, the measurements of the scatter-broadening time and $α$ from analysis of PSR J1643$-$1224, observed with upgraded Giant Metrewave Radio Telescope as part of the Indian Pulsar Timing Array experiment. These scattering parameters were found to vary with epoch and $α$ was different from that expected for Kolmogorov turbulence. Finally, we present the DM time-series after application of the new technique to PSR J1643$-$1224. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Comments: 9 pages, 8 figures, Submitted to MNRAS

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

Authors: The International Pulsar Timing Array Collaboration, G. Agazie, J. Antoniadis, A. Anumarlapudi, A. M. Archibald, P. Arumugam, S. Arumugam, Z. Arzoumanian, J. Askew, S. Babak, M. Bagchi, M. Bailes, A. -S. Bak Nielsen, P. T. Baker, C. G. Bassa, A. Bathula, B. Bécsy, A. Berthereau, N. D. R. Bhat, L. Blecha, M. Bonetti, E. Bortolas, A. Brazier, P. R. Brook, M. Burgay , et al. (220 additional authors not shown)

Abstract: The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA… ▽ More The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 21 pages, 9 figures, submitted to ApJ

The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, P. Auclair, S. Babak, M. Bagchi, A. -S. Bak Nielsen, E. Barausse, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, C. Caprini, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, M. Crisostomi, S. Dandapat, D. Deb , et al. (89 additional authors not shown)

Abstract: The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling sup… ▽ More The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy. △ Less

Submitted 15 May, 2024; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 30 pages, 23 figures, replaced to match the version published in Astronomy & Astrophysics, note the change in the numbering order in the series (now paper IV)

The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (75 additional authors not shown)

Abstract: We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results o… ▽ More We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature. △ Less

Submitted 25 June, 2024; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 13 figures, 15 pages, accepted

The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (73 additional authors not shown)

Abstract: The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the su… ▽ More The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 20 pages, 6 figures, 9 tables

Journal ref: A&A 678, A49 (2023)

The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. -S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (73 additional authors not shown)

Abstract: We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on… ▽ More We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3σ$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 21 pages, 14 figures, 4 appendix figures, accepted for publication in A&A

Journal ref: A&A 678, A50 (2023)

Multi-band Extension of the Wideband Timing Technique

Authors: Avinash Kumar Paladi, Churchil Dwivedi, Prerna Rana, Nobleson K, Abhimanyu Susobhanan, Bhal Chandra Joshi, Pratik Tarafdar, Debabrata Deb, Swetha Arumugam, A Gopakumar, M A Krishnakumar, Neelam Dhanda Batra, Jyotijwal Debnath, Fazal Kareem, Paramasivan Arumugam, Manjari Bagchi, Adarsh Bathula, Subhajit Dandapat, Shantanu Desai, Yashwant Gupta, Shinnosuke Hisano, Divyansh Kharbanda, Tomonosuke Kikunaga, Neel Kolhe, Yogesh Maan , et al. (5 additional authors not shown)

Abstract: The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency sp… ▽ More The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency span to estimate DMs and ToAs with enhanced precision. We implement the wideband likelihood using the libstempo python interface to perform wideband timing in the tempo2 framework. We present the application of these techniques to the dataset of fourteen millisecond pulsars observed simultaneously in Band 3 (300 - 500 MHz) and Band 5 (1260 - 1460 MHz) of the upgraded Giant Metrewave Radio Telescope (uGMRT) with a large band gap of 760 MHz as a part of the Indian Pulsar Timing Array (InPTA) campaign. We achieve increased ToA and DM precision and sub-microsecond root mean square post-fit timing residuals by combining simultaneous multi-band pulsar observations done in non-contiguous bands for the first time using our novel techniques. △ Less

Submitted 8 November, 2023; v1 submitted 25 April, 2023; originally announced April 2023.

Comments: Published in MNRAS

The International Pulsar Timing Array checklist for the detection of nanohertz gravitational waves

Authors: Bruce Allen, Sanjeev Dhurandhar, Yashwant Gupta, Maura McLaughlin, Priyamvada Natarajan, Ryan M. Shannon, Eric Thrane, Alberto Vecchio

Abstract: Pulsar timing arrays (PTAs) provide a way to detect gravitational waves at nanohertz frequencies. In this band, the most likely signals are stochastic, with a power spectrum that rises steeply at lower frequencies. Indeed, the observation of a common red noise process in pulsar-timing data suggests that the first credible detection of nanohertz-frequency gravitational waves could take place within… ▽ More Pulsar timing arrays (PTAs) provide a way to detect gravitational waves at nanohertz frequencies. In this band, the most likely signals are stochastic, with a power spectrum that rises steeply at lower frequencies. Indeed, the observation of a common red noise process in pulsar-timing data suggests that the first credible detection of nanohertz-frequency gravitational waves could take place within the next few years. The detection process is complicated by the nature of the signals and the noise: the first observational claims will be statistical inferences drawn at the threshold of detectability. To demonstrate that gravitational waves are creating some of the noise in the pulsar-timing data sets, observations must exhibit the Hellings and Downs curve -- the angular correlation function associated with gravitational waves -- as well as demonstrating that there are no other reasonable explanations. To ensure that detection claims are credible, the International Pulsar Timing Array (IPTA) has a formal process to vet results prior to publication. This includes internal sharing of data and processing pipelines between different PTAs, enabling independent cross-checks and validation of results. To oversee and validate any detection claim, the IPTA has also created an eight-member Detection Committee (DC) which includes four independent external members. IPTA members will only publish their results after a formal review process has concluded. This document is the initial DC checklist, describing some of the conditions that should be fulfilled by a credible detection. At the present time none of the PTAs have a detection claim; therefore this document serves as a road map for the future. △ Less

Submitted 31 May, 2023; v1 submitted 9 April, 2023; originally announced April 2023.

Comments: 6 pages

Precise determination of quadrupole and hexadecapole deformation parameters of the $sd$-shell nucleus, $^{28}$Si

Authors: Y. K. Gupta, V. B. Katariy, G. K. Prajapati, K. Hagino, D. Patel, V. Ranga, L. S. Danu, A. Pal, B. N. Joshi, S. Dubey, V. V. Desai, S. Panwar, U. Garg, N. Kumar, S. Mukhopadhyay, Pawan Singh, N. Sirswal, R. Sariyal, I. Mazumdar, B. V. John

Abstract: Quasi-elastic (QEL) scattering measurements have been performed using $^{28}$Si projectile off a $^{90}$Zr target at energies around the Coulomb barrier. A Bayesian analysis within the framework of coupled channels (CC) calculations is performed in a large parameter space of quadrupole and hexadecapole deformations ($β_{2}$ and $β_{4}$) of $^{28}$Si. Our results clearly show that $^{28}$Si is an o… ▽ More Quasi-elastic (QEL) scattering measurements have been performed using $^{28}$Si projectile off a $^{90}$Zr target at energies around the Coulomb barrier. A Bayesian analysis within the framework of coupled channels (CC) calculations is performed in a large parameter space of quadrupole and hexadecapole deformations ($β_{2}$ and $β_{4}$) of $^{28}$Si. Our results clearly show that $^{28}$Si is an oblate shaped nucleus with $β_{2}$=-$0.38 \pm 0.01$ which is in excellent agreement with electromagnetic probes. A precise value of hexadecapole deformation for $^{28}$Si, $β_{4}$=+$0.03 \pm 0.01$, along with a consistent value of quadrupole deformation has now been determined for the first time using QEL scattering. A remarkable agreement between the experimental $β_{4}$ value of $^{28}$Si and Skyrme-Hartree-Fock based calculations is obtained. The QEL results obtained previously for $^{24}$Mg (prolate) and the present result for $^{28}$Si (oblate) hereby affirm the strong sensitivity of the quasi-elastic scattering to ground state deformations, thus reinforcing its suitability as a potential probe for rare exotic nuclei. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Noise analysis of the Indian Pulsar Timing Array data release I

Authors: Aman Srivastava, Shantanu Desai, Neel Kolhe, Mayuresh Surnis, Bhal Chandra Joshi, Abhimanyu Susobhanan, Aurélien Chalumeau, Shinnosuke Hisano, Nobleson K., Swetha Arumugam, Divyansh Kharbanda, Jaikhomba Singha, Pratik Tarafdar, P Arumugam, Manjari Bagchi, Adarsh Bathula, Subhajit Dandapat, Lankeswar Dey, Churchil Dwivedi, Raghav Girgaonkar, A. Gopakumar, Yashwant Gupta, Tomonosuke Kikunaga, M. A. Krishnakumar, Kuo Liu , et al. (6 additional authors not shown)

Abstract: The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering vari… ▽ More The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering variations in our analysis. We apply Bayesian model selection to obtain the preferred noise models among these for each pulsar. For PSR J1600$-$3053, we find no evidence of DM and scattering variations, while for PSR J1909$-$3744, we find no significant scattering variations. Properties vary dramatically among pulsars. For example, we find a strong chromatic noise with chromatic index $\sim$ 2.9 for PSR J1939+2134, indicating the possibility of a scattering index that doesn't agree with that expected for a Kolmogorov scattering medium consistent with similar results for millisecond pulsars in past studies. Despite the relatively short time baseline, the noise models broadly agree with the other PTAs and provide, at the same time, well-constrained DM and scattering variations. △ Less

Submitted 16 June, 2023; v1 submitted 21 March, 2023; originally announced March 2023.

Comments: Accepted for publication in PRD, 30 pages, 17 figures, 4 tables

Progression of Digital-Receiver Architecture: From MWA to SKA1-Low,and beyond

Authors: Girish B. S., Harshavardhan Reddy S., Shiv Sethi, Srivani K. S., Abhishek R., Ajithkumar B., Sahana Bhattramakki, Kaushal Buch, Sandeep Chaudhuri, Yashwant Gupta, Kamini P. A., Sanjay Kudale, Madhavi S., Mekhala Muley, Prabu T., Raghunathan A., Shelton G. J

Abstract: Backed by advances in digital electronics, signal processing, computation, and storage technologies, aperture arrays, which had strongly influenced the design of telescopes in the early years of radio astronomy, have made a comeback. Amid all these developments, an international effort to design and build the world's largest radio telescope, the Square Kilometre Array (SKA), is ongoing. With its v… ▽ More Backed by advances in digital electronics, signal processing, computation, and storage technologies, aperture arrays, which had strongly influenced the design of telescopes in the early years of radio astronomy, have made a comeback. Amid all these developments, an international effort to design and build the world's largest radio telescope, the Square Kilometre Array (SKA), is ongoing. With its vast collecting area of 1 sq-km, the SKA is envisaged to provide unsurpassed sensitivity and leverage technological advances to implement a complex receiver to provide a large field of view through multiple beams on the sky. Many pathfinders and precursor aperture array telescopes for the SKA, operating in the frequency range of 10-300 MHz, have been constructed and operationalized to obtain valuable feedback on scientific, instrumental, and functional aspects. This review article looks explicitly into the progression of digital-receiver architecture from the Murchison Widefield Array (precursor) to the SKA1-Low. It highlights the technological advances in analog-to-digital converters (ADCs),field-programmable gate arrays (FPGAs), and central processing unit-graphics processing unit (CPU-GPU) hybrid platforms around which complex digital signal processing systems implement efficient channelizers, beamformers, and correlators. The article concludes with a preview of the design of a new generation signal processing platform based on radio frequency system-on-chip (RFSoC). △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 18 pages, 4 figures, Accepted for publication in the special issue (2023) on the SKA from the JoAA

Federated Learning for Non-IID Data via Client Variance Reduction and Adaptive Server Update

Authors: Hiep Nguyen, Lam Phan, Harikrishna Warrier, Yogesh Gupta

Abstract: Federated learning (FL) is an emerging technique used to collaboratively train a global machine learning model while keeping the data localized on the user devices. The main obstacle to FL's practical implementation is the Non-Independent and Identical (Non-IID) data distribution across users, which slows convergence and degrades performance. To tackle this fundamental issue, we propose a method (… ▽ More Federated learning (FL) is an emerging technique used to collaboratively train a global machine learning model while keeping the data localized on the user devices. The main obstacle to FL's practical implementation is the Non-Independent and Identical (Non-IID) data distribution across users, which slows convergence and degrades performance. To tackle this fundamental issue, we propose a method (ComFed) that enhances the whole training process on both the client and server sides. The key idea of ComFed is to simultaneously utilize client-variance reduction techniques to facilitate server aggregation and global adaptive update techniques to accelerate learning. Our experiments on the Cifar-10 classification task show that ComFed can improve state-of-the-art algorithms dedicated to Non-IID data. △ Less

Submitted 29 July, 2022; v1 submitted 18 July, 2022; originally announced July 2022.

High-Performance Computing for SKA Transient Search: Use of FPGA based Accelerators -- a brief review

Authors: R. Aafreen, R. Abhishek, B. Ajithkumar, Arunkumar M. Vaidyanathan, Indrajit. V. Barve, Sahana Bhattramakki, Shashank Bhat, B. S. Girish, Atul Ghalame, Y. Gupta, Harshal G. Hayatnagarkar, P. A. Kamini, A. Karastergiou, L. Levin, S. Madhavi, M. Mekhala, M. Mickaliger, V. Mugundhan, Arun Naidu, J. Oppermann, B. Arul Pandian, N. Patra, A. Raghunathan, Jayanta Roy, Shiv Sethi , et al. (12 additional authors not shown)

Abstract: This paper presents the High-Performance computing efforts with FPGA for the accelerated pulsar/transient search for the SKA. Case studies are presented from within SKA and pathfinder telescopes highlighting future opportunities. It reviews the scenario that has shifted from offline processing of the radio telescope data to digitizing several hundreds/thousands of antenna outputs over huge bandwid… ▽ More This paper presents the High-Performance computing efforts with FPGA for the accelerated pulsar/transient search for the SKA. Case studies are presented from within SKA and pathfinder telescopes highlighting future opportunities. It reviews the scenario that has shifted from offline processing of the radio telescope data to digitizing several hundreds/thousands of antenna outputs over huge bandwidths, forming several 100s of beams, and processing the data in the SKA real-time pulsar search pipelines. A brief account of the different architectures of the accelerators, primarily the new generation Field Programmable Gate Array-based accelerators, showing their critical roles to achieve high-performance computing and in handling the enormous data volume problems of the SKA is presented here. It also presents the power-performance efficiency of this emerging technology and presents potential future scenarios. △ Less

Submitted 17 January, 2023; v1 submitted 14 July, 2022; originally announced July 2022.

Comments: Accepted for publication in the JoAA special issue on SKA (2023)

Nanohertz Gravitational Wave Astronomy during the SKA Era: An InPTA perspective

Authors: Bhal Chandra Joshi, Achamveedu Gopakumar, Arul Pandian, Thiagaraj Prabu, Lankeswar Dey, Manjari Bagchi, Shantanu Desai, Pratik Tarafdar, Prerna Rana, Yogesh Maan, Neelam Dhanda Batra, Raghav Girgaonkar, Nikita Agarwal, Paramasivan Arumugam, Sarmistha Banik, Avishek Basu, Adarsh Bathula, Subhajit Dandapat, Yashwant Gupta, Shinnosuke Hisano, Ryo Kato, Divyansh Kharbanda, Tomonosuke Kikunaga, Neel Kolhe, M. A. Krishnakumar , et al. (12 additional authors not shown)

Abstract: Decades long monitoring of millisecond pulsars, which exhibit highly stable rotational periods, in pulsar timing array experiments is on the threshold of discovering nanohertz stochastic gravitational wave background. This paper describes the Indian Pulsar timing array (InPTA) experiment, which employs the upgraded Giant Metrewave Radio Telescope (uGMRT) for timing an ensemble of millisecond pulsa… ▽ More Decades long monitoring of millisecond pulsars, which exhibit highly stable rotational periods, in pulsar timing array experiments is on the threshold of discovering nanohertz stochastic gravitational wave background. This paper describes the Indian Pulsar timing array (InPTA) experiment, which employs the upgraded Giant Metrewave Radio Telescope (uGMRT) for timing an ensemble of millisecond pulsars for this purpose. We highlight InPTA's observation strategies and analysis methods, which are relevant for a future PTA experiment with the more sensitive Square Kilometer Array (SKA) telescope. We show that the unique multi-sub-array multi-band wide-bandwidth frequency coverage of the InPTA provides Dispersion Measure estimates with unprecedented precision for PTA pulsars, e.g., ~ 2 x 10{-5} pc-cm{-3} for PSR J1909-3744. Configuring the SKA-low and SKA-mid as two and four sub-arrays respectively, it is shown that comparable precision is achievable, using observation strategies similar to those pursued by the InPTA, for a larger sample of 62 pulsars requiring about 26 and 7 hours per epoch for the SKA-mid and the SKA-low telescopes respectively. We also review the ongoing efforts to develop PTA-relevant general relativistic constructs that will be required to search for nanohertz gravitational waves from isolated super-massive black hole binary systems like blazar OJ 287. These efforts should be relevant to pursue persistent multi-messenger gravitational wave astronomy during the forthcoming era of the SKA telescope, the Thirty Meter Telescope, and the next-generation Event Horizon Telescope. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Comments: Accepted for publication in Journal of Astronomy and Astrophysics for Special Issue on Indian Participation in the SKA (Editors : Abhirup Datta, Nirupam Roy, Preeti Kharb and Tirthankar Roy Choudhury)

The Indian Pulsar Timing Array: First data release

Authors: Pratik Tarafdar, Nobleson K., Prerna Rana, Jaikhomba Singha, M. A. Krishnakumar, Bhal Chandra Joshi, Avinash Kumar Paladi, Neel Kolhe, Neelam Dhanda Batra, Nikita Agarwal, Adarsh Bathula, Subhajit Dandapat, Shantanu Desai, Lankeswar Dey, Shinnosuke Hisano, Prathamesh Ingale, Ryo Kato, Divyansh Kharbanda, Tomonosuke Kikunaga, Piyush Marmat, B. Arul Pandian, T. Prabu, Aman Srivastava, Mayuresh Surnis, Sai Chaitanya Susarla , et al. (13 additional authors not shown)

Abstract: We present the pulse arrival times and high-precision dispersion measure estimates for 14 millisecond pulsars observed simultaneously in the 300-500 MHz and 1260-1460 MHz frequency bands using the upgraded Giant Metrewave Radio Telescope (uGMRT). The data spans over a baseline of 3.5 years (2018-2021), and is the first official data release made available by the Indian Pulsar Timing Array collabor… ▽ More We present the pulse arrival times and high-precision dispersion measure estimates for 14 millisecond pulsars observed simultaneously in the 300-500 MHz and 1260-1460 MHz frequency bands using the upgraded Giant Metrewave Radio Telescope (uGMRT). The data spans over a baseline of 3.5 years (2018-2021), and is the first official data release made available by the Indian Pulsar Timing Array collaboration. This data release presents a unique opportunity for investigating the interstellar medium effects at low radio frequencies and their impact on the timing precision of pulsar timing array experiments. In addition to the dispersion measure time series and pulse arrival times obtained using both narrowband and wideband timing techniques, we also present the dispersion measure structure function analysis for selected pulsars. Our ongoing investigations regarding the frequency dependence of dispersion measures have been discussed. Based on the preliminary analysis for five millisecond pulsars, we do not find any conclusive evidence of chromaticity in dispersion measures. Data from regular simultaneous two-frequency observations are presented for the first time in this work. This distinctive feature leads us to the highest precision dispersion measure estimates obtained so far for a subset of our sample. Simultaneous multi-band uGMRT observations in Band 3 and Band 5 are crucial for high-precision dispersion measure estimation and for the prospect of expanding the overall frequency coverage upon the combination of data from the various Pulsar Timing Array consortia in the near future. Parts of the data presented in this work are expected to be incorporated into the upcoming third data release of the International Pulsar Timing Array. △ Less

Submitted 25 October, 2022; v1 submitted 18 June, 2022; originally announced June 2022.

Comments: 23 pages, 21 figures, 3 tables. Published in PASA

Journal ref: Publications of the Astronomical Society of Australia, Volume 39, 2022, e053

A Neural Network-Based Energy Management System for PV-Battery Based Microgrids

Authors: Yusuf Gupta, Mohammad Amin

Abstract: A neural network-based energy management system (NN-EMS) has been proposed in this paper for islanded ac microgrids fed by multiple PV-battery based distributed generators (DG). The stochastic and unequal irradiation results in unequal PV output, which causes an unequal state-of-charge (SoC) among the batteries of the DGs. This effect may cause the difference in the SoCs to increase considerably o… ▽ More A neural network-based energy management system (NN-EMS) has been proposed in this paper for islanded ac microgrids fed by multiple PV-battery based distributed generators (DG). The stochastic and unequal irradiation results in unequal PV output, which causes an unequal state-of-charge (SoC) among the batteries of the DGs. This effect may cause the difference in the SoCs to increase considerably over time, leading to some batteries reaching their SoC limits. These batteries would no longer be able to control the dc-link of the hybrid grid forming DG. The proposed NN-EMS ensures SoC balancing by learning an optimal state-action mapping using the outputs of an optimal power flow (OPF). The training dataset has been generated by executing a mixed-integer linear programming based OPF for droop-based island microgrids considering a practical generation-load profile. The resultant NN-EMS controller inherits the information of optimal states and the network behaviour. Compared to traditional time-ahead centralized methods, the proposed strategy does not require accurate generation-load forecasting. Further, it can also respond to the variations in the PV power in near-real-time without resorting to solving an OPF. The proposed NN-EMS controller has been validated by case studies on a CIGRE LV microgrid containing PV-battery hybrid DGs. The proposed concept can also be extended to synthesize decentralized controllers that can cooperate among themselves to achieve a global objective without communication. △ Less

Submitted 14 June, 2022; originally announced June 2022.

Comments: 10 pages, 15 figures

Upgraded GMRT survey for pulsars in globular clusters. I: Discovery of a millisecond binary pulsar in NGC 6652

Authors: T. Gautam, A. Ridolfi, P. C. C. Freire, R. S. Wharton, Y. Gupta, S. M. Ransom, L. S. Oswald, M. Kramer, M. E. DeCesar

Abstract: Globular clusters contain a unique pulsar population, with many exotic systems that can form only in their dense stellar environments. The leap in sensitivity of the upgraded Giant Metrewave Radio Telescope (uGMRT) in India, especially at low radio frequencies ($<$ 1 GHz) has motivated a new search for radio pulsars in a group of eight Southern globular clusters. We discovered PSR J1835$-$3259B, a… ▽ More Globular clusters contain a unique pulsar population, with many exotic systems that can form only in their dense stellar environments. The leap in sensitivity of the upgraded Giant Metrewave Radio Telescope (uGMRT) in India, especially at low radio frequencies ($<$ 1 GHz) has motivated a new search for radio pulsars in a group of eight Southern globular clusters. We discovered PSR J1835$-$3259B, a 1.83-ms pulsar in NGC 6652; this is in a near-circular wide orbit of 28.7 hr with a low-mass ($ \sim 0.2 \, M_{\rm \odot}$) companion, likely a Helium white dwarf. We derived a 10-year timing solution for this system. We also present measurements of scattering, flux densities and spectral indices for some of the previously known pulsars in these GCs. A significant fraction of the pulsars in these clusters have steep spectral indices. Additionally, we detected eight radio point sources not associated with any known pulsar positions in the radio images. There are four newly identified sources, three in NGC 6652 and one in NGC 6539, and one previously identified source each in NGC 1851, NGC 6440, NGC 6544, and Terzan 5. Surprisingly, our images show that our newly discovered pulsar, PSR J1835$-$3259B, is the brightest pulsar in all GCs we have imaged; like other pulsars with broad profiles (Terzan 5 C and O), its flux density in the radio images is much larger than in its pulsations. This indicates that their pulsed emission is only a fraction of their total emission. The detection of radio sources outside the core radii but well within the tidal radii of these clusters show that future GC surveys should complement the search analysis by using the imaging capability of interferometers, and preferentially synthesize large number of search beams in order to obtain a larger field of view. △ Less

Submitted 1 July, 2022; v1 submitted 30 May, 2022; originally announced May 2022.

Comments: 18 pages, 9 figures, 7 tables. Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 664, A54 (2022)

Survival Analysis on Structured Data using Deep Reinforcement Learning

Authors: Renith G, Harikrishna Warrier, Yogesh Gupta

Abstract: Survival analysis is playing a major role in manufacturing sector by analyzing occurrence of any unwanted event based on the input data. Predictive maintenance, which is a part of survival analysis, helps to find any device failure based on the current incoming data from different sensor or any equipment. Deep learning techniques were used to automate the predictive maintenance problem to some ext… ▽ More Survival analysis is playing a major role in manufacturing sector by analyzing occurrence of any unwanted event based on the input data. Predictive maintenance, which is a part of survival analysis, helps to find any device failure based on the current incoming data from different sensor or any equipment. Deep learning techniques were used to automate the predictive maintenance problem to some extent, but they are not very helpful in predicting the device failure for the input data which the algorithm had not learned. Since neural network predicts the output based on previous learned input features, it cannot perform well when there is more variation in input features. Performance of the model is degraded with the occurrence of changes in input data and finally the algorithm fails in predicting the device failure. This problem can be solved by our proposed method where the algorithm can predict the device failure more precisely than the existing deep learning algorithms. The proposed solution involves implementation of Deep Reinforcement Learning algorithm called Double Deep Q Network (DDQN) for classifying the device failure based on the input features. The algorithm is capable of learning different variation of the input feature and is robust in predicting whether the device will fail or not based on the input data. The proposed DDQN model is trained with limited or lesser amount of input data. The trained model predicted larger amount of test data efficiently and performed well compared to other deep learning and machine learning models. △ Less

Submitted 28 May, 2022; originally announced May 2022.

Network state Estimation using Raw Video Analysis: vQoS-GAN based non-intrusive Deep Learning Approach

Authors: Renith G, Harikrishna Warrier, Yogesh Gupta

Abstract: Content based providers transmits real time complex signal such as video data from one region to another. During this transmission process, the signals usually end up distorted or degraded where the actual information present in the video is lost. This normally happens in the streaming video services applications. Hence there is a need to know the level of degradation that happened in the receiver… ▽ More Content based providers transmits real time complex signal such as video data from one region to another. During this transmission process, the signals usually end up distorted or degraded where the actual information present in the video is lost. This normally happens in the streaming video services applications. Hence there is a need to know the level of degradation that happened in the receiver side. This video degradation can be estimated by network state parameters like data rate and packet loss values. Our proposed solution vQoS GAN (video Quality of Service Generative Adversarial Network) can estimate the network state parameters from the degraded received video data using a deep learning approach of semi supervised generative adversarial network algorithm. A robust and unique design of deep learning network model has been trained with the video data along with data rate and packet loss class labels and achieves over 95 percent of training accuracy. The proposed semi supervised generative adversarial network can additionally reconstruct the degraded video data to its original form for a better end user experience. △ Less

Submitted 22 March, 2022; originally announced April 2022.

Comments: 18 pages, 10 figures

Identifying Security Risks in NFT Platforms

Authors: Yash Gupta, Jayanth Kumar, Dr. Andrew Reifers

Abstract: This paper examines the effects of inherent risks in the emerging technology of non-fungible tokens and proposes an actionable set of solutions for stakeholders in this ecosystem and observers. Web3 and NFTs are a fast-growing 300 billion dollar economy with some clear, highly publicized harms that came to light recently. We set out to explore the risks to understand their nature and scope, and if… ▽ More This paper examines the effects of inherent risks in the emerging technology of non-fungible tokens and proposes an actionable set of solutions for stakeholders in this ecosystem and observers. Web3 and NFTs are a fast-growing 300 billion dollar economy with some clear, highly publicized harms that came to light recently. We set out to explore the risks to understand their nature and scope, and if we could find ways to mitigate them. In due course of investigation, we recap the background of the evolution of the web from a client-server model to the rise of Web2.0 tech giants in the early 2000s. We contrast how the Web3 movement is trying to re-establish the independent style of the early web. In our research we discover a primary set of risks and harms relevant to the ecosystem, and classify them into a simple taxonomy while addressing their mitigations with solutions. We arrive at a set of solutions that are a combination of processes to be adopted, and technological changes or improvements to be incorporated into the ecosystem, to implement risk mitigations. By linking mitigations to individual risks, we are confident our recommendations will improve the security maturity of the growing Web3 ecosystem. We are not endorsing, or recommending specifically any particular product or service in our solution set. Nor are we compensated or influenced in any way by these companies to list these products in our research. The evaluations of products in our research have to simply be viewed as suggested improvements. △ Less

Submitted 5 April, 2022; v1 submitted 18 March, 2022; originally announced April 2022.

A low cost plasmonic platform for photon emission engineering of two dimensional semiconductors

Authors: Anuj Kumar Singh, Kishor K Mandal, Yashika Gupta, Abhay Anand VS, Lekshmi Eswaramoorthy, Brijesh Kumar, Abhinav Kala, Saurabh Dixit, Venu Gopal Achanta, Anshuman Kumar

Abstract: Although the field of 2D materials has democratized materials science by making high quality samples accessible cheaply, due to the atomically thin nature of these systems, an integration with nanostructures is almost always required to obtain a significant optical response. Traditionally, these nanostructures are fabricated via electron beam lithography or focused ion beam milling, which are expe… ▽ More Although the field of 2D materials has democratized materials science by making high quality samples accessible cheaply, due to the atomically thin nature of these systems, an integration with nanostructures is almost always required to obtain a significant optical response. Traditionally, these nanostructures are fabricated via electron beam lithography or focused ion beam milling, which are expensive and large area fabrication can be further time consuming. In order to overcome this problem, we report the integration of 2D semiconductors on a cost-effective and large area fabricated nanocone platform. We show that the plasmon modes of our nanocone structures lead to photoluminescence (PL) enhancement of monolayer WSe$_2$ by about eight to ten times compared to the non-plasmonic case, consistent with finite-difference time-domain simulations. Excitation power-dependent measurements reveal that our nanocone platform enables a versatile route to engineering the relative exciton trion contributions to the emission. △ Less

Submitted 22 March, 2022; originally announced March 2022.

A photonic integrated chip platform for interlayer exciton valley routing

Authors: Kishor K Mandal, Yashika Gupta, Mandar Sohoni, Achanta Venu Gopal, Anshuman Kumar

Abstract: Interlayer excitons in two dimensional semiconductor heterostructures show suppressed electron-hole overlap resulting in longer radiative lifetimes as compared to intralyer excitons. Such tightly bound interlayer excitons are relevant for important optoelectronic applications including light storage and quantum communication. Their optical accessibility is, however, limited due to their out-of-pla… ▽ More Interlayer excitons in two dimensional semiconductor heterostructures show suppressed electron-hole overlap resulting in longer radiative lifetimes as compared to intralyer excitons. Such tightly bound interlayer excitons are relevant for important optoelectronic applications including light storage and quantum communication. Their optical accessibility is, however, limited due to their out-of-plane transition dipole moment. In this work, we design a CMOS compatible photonic integrated chip platform for enhanced near field coupling of these interlayer excitons with the whispering gallery modes of a microresonator, exploiting the high confinement of light in a small modal volume and high quality factor of the system. Our platform allows for highly selective emission routing via engineering an asymmetric light transmission which facilitates efficient readout and channeling of the excitonic valley state from such systems. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Multi-Row, Multi-Span Distant Supervision For Table+Text Question

Authors: Vishwajeet Kumar, Yash Gupta, Saneem Chemmengath, Jaydeep Sen, Soumen Chakrabarti, Samarth Bharadwaj, FeiFei Pan

Abstract: Question answering (QA) over tables and linked text, also called TextTableQA, has witnessed significant research in recent years, as tables are often found embedded in documents along with related text. HybridQA and OTT-QA are the two best-known TextTableQA datasets, with questions that are best answered by combining information from both table cells and linked text passages. A common challenge in… ▽ More Question answering (QA) over tables and linked text, also called TextTableQA, has witnessed significant research in recent years, as tables are often found embedded in documents along with related text. HybridQA and OTT-QA are the two best-known TextTableQA datasets, with questions that are best answered by combining information from both table cells and linked text passages. A common challenge in both datasets, and TextTableQA in general, is that the training instances include just the question and answer, where the gold answer may match not only multiple table cells across table rows but also multiple text spans within the scope of a table row and its associated text. This leads to a noisy multi instance training regime. We present MITQA, a transformer-based TextTableQA system that is explicitly designed to cope with distant supervision along both these axes, through a multi-instance loss objective, together with careful curriculum design. Our experiments show that the proposed multi-instance distant supervision approach helps MITQA get state-of-the-art results beating the existing baselines for both HybridQA and OTT-QA, putting MITQA at the top of HybridQA leaderboard with best EM and F1 scores on a held out test set. △ Less

Submitted 11 June, 2023; v1 submitted 14 December, 2021; originally announced December 2021.

Comments: ACL 2023

Low-frequency wideband timing of InPTA pulsars observed with the uGMRT

Authors: K Nobleson, Nikita Agarwal, Raghav Girgaonkar, Arul Pandian, Bhal Chandra Joshi, M A Krishnakumar, Abhimanyu Susobhanan, Shantanu Desai, T Prabu, Adarsh Bathula, Timothy T Pennucci, Sarmistha Banik, Manjari Bagchi, Neelam Dhanda Batra, Arpita Choudhary, Subhajit Dandapat, Lankeswar Dey, Yashwant Gupta, Shinnosuke Hisano, Ryo Kato, Divyansh Kharbanda, Tomonosuke Kikunaga, Neel Kolhe, Yogesh Maan, Piyush Marmat , et al. (7 additional authors not shown)

Abstract: High-precision measurements of the pulsar dispersion measure (DM) are possible using telescopes with low-frequency wideband receivers. We present an initial study of the application of the wideband timing technique, which can simultaneously measure the pulsar times of arrival (ToAs) and DMs, for a set of five pulsars observed with the upgraded Giant Metrewave Radio Telescope (uGMRT) as part of the… ▽ More High-precision measurements of the pulsar dispersion measure (DM) are possible using telescopes with low-frequency wideband receivers. We present an initial study of the application of the wideband timing technique, which can simultaneously measure the pulsar times of arrival (ToAs) and DMs, for a set of five pulsars observed with the upgraded Giant Metrewave Radio Telescope (uGMRT) as part of the Indian Pulsar Timing Array (InPTA) campaign. We have used the observations with the 300-500 MHz band of the uGMRT for this purpose. We obtain high precision in DM measurements with precisions of the order 10^{-6}cm^{-3}pc. The ToAs obtained have sub-μs precision and the root-mean-square of the post-fit ToA residuals are in the sub-μs range. We find that the uncertainties in the DMs and ToAs obtained with this wideband technique, applied to low-frequency data, are consistent with the results obtained with traditional pulsar timing techniques and comparable to high-frequency results from other PTAs. This work opens up an interesting possibility of using low-frequency wideband observations for precision pulsar timing and gravitational wave detection with similar precision as high-frequency observations used conventionally. △ Less

Submitted 23 February, 2022; v1 submitted 13 December, 2021; originally announced December 2021.

Comments: Accepted for publication in MNRAS

Gate tunable light-matter interaction in natural biaxial hyperbolic van der Waals heterostructures

Authors: Aneesh Bapat, Saurabh Dixit, Yashika Gupta, Tony Low, Anshuman Kumar

Abstract: The recent discovery of natural biaxial hyperbolicity in van der Waals crystals, such as $α$-MoO$_3$, has opened up new avenues for mid-IR nanophotonics due to their deep subwavelength phonon-polaritons. However, a significant challenge is the lack of active tunability of these hyperbolic phonon polaritons. In this work, we investigate heterostructures of graphene and $α$-MoO$_3$ for actively tuna… ▽ More The recent discovery of natural biaxial hyperbolicity in van der Waals crystals, such as $α$-MoO$_3$, has opened up new avenues for mid-IR nanophotonics due to their deep subwavelength phonon-polaritons. However, a significant challenge is the lack of active tunability of these hyperbolic phonon polaritons. In this work, we investigate heterostructures of graphene and $α$-MoO$_3$ for actively tunable hybrid plasmon phonon polariton modes via electrostatic gating in the mid-infrared spectral region. We observe a unique propagation direction dependent hybridization of graphene plasmon polaritons with hyperbolic phonon polaritons for experimentally feasible values of graphene chemical potential. We further report an application to tunable valley quantum interference in this system with a broad operational bandwidth due to the formation of these hybrid modes. This work presents a lithography-free alternative for actively tunable, anisotropic spontaneous emission enhancement using a sub-wavelength thick naturally biaxial hyperbolic materials. △ Less

Submitted 25 January, 2022; v1 submitted 14 October, 2021; originally announced October 2021.

Source Printer Identification using Printer Specific Pooling of Letter Descriptors

Authors: Sharad Joshi, Yogesh Kumar Gupta, Nitin Khanna

Abstract: The digital revolution has replaced the use of printed documents with their digital counterparts. However, many applications require the use of both due to several factors, including challenges of digital security, installation costs, ease of use, and lack of digital expertise. Technological developments in the digital domain have also resulted in the easy availability of high-quality scanners, pr… ▽ More The digital revolution has replaced the use of printed documents with their digital counterparts. However, many applications require the use of both due to several factors, including challenges of digital security, installation costs, ease of use, and lack of digital expertise. Technological developments in the digital domain have also resulted in the easy availability of high-quality scanners, printers, and image editing software at lower prices. Miscreants leverage such technology to develop forged documents that may go undetected in vast volumes of printed documents. These developments mandate the research on creating fast and accurate digital systems for source printer identification of printed documents. We extensively analyze and propose a printer-specific pooling that improves the performance of printer-specific local texture descriptor on two datasets. The proposed pooling performs well using a simple correlation-based prediction instead of a complex machine learning-based classifier achieving improved performance under cross-font scenarios. The proposed system achieves an average classification accuracy of 93.5%, 94.3%, and 60.3% on documents printed in Arial, Times New Roman, and Comic Sans font types respectively, when documents printed in only Cambria font are available for training. △ Less

Submitted 23 September, 2021; originally announced September 2021.

Comments: 34 pages, 5 figures, Journal

Stateful Detection of Model Extraction Attacks

Authors: Soham Pal, Yash Gupta, Aditya Kanade, Shirish Shevade

Abstract: Machine-Learning-as-a-Service providers expose machine learning (ML) models through application programming interfaces (APIs) to developers. Recent work has shown that attackers can exploit these APIs to extract good approximations of such ML models, by querying them with samples of their choosing. We propose VarDetect, a stateful monitor that tracks the distribution of queries made by users of su… ▽ More Machine-Learning-as-a-Service providers expose machine learning (ML) models through application programming interfaces (APIs) to developers. Recent work has shown that attackers can exploit these APIs to extract good approximations of such ML models, by querying them with samples of their choosing. We propose VarDetect, a stateful monitor that tracks the distribution of queries made by users of such a service, to detect model extraction attacks. Harnessing the latent distributions learned by a modified variational autoencoder, VarDetect robustly separates three types of attacker samples from benign samples, and successfully raises an alarm for each. Further, with VarDetect deployed as an automated defense mechanism, the extracted substitute models are found to exhibit poor performance and transferability, as intended. Finally, we demonstrate that even adaptive attackers with prior knowledge of the deployment of VarDetect, are detected by it. △ Less

Submitted 11 July, 2021; originally announced July 2021.

Evidence for profile changes in PSR J1713+0747 using the uGMRT

Authors: Jaikhomba Singha, Mayuresh P Surnis, Bhal Chandra Joshi, Pratik Tarafdar, Prerna Rana, Abhimanyu Susobhanan, Raghav Girgaonkar, Neel Kolhe, Nikita Agarwal, Shantanu Desai, T Prabu, Adarsh Bathula, Subhajit Dandapat, Lankeswar Dey, Shinnosuke Hisano, Ryo Kato, Divyansh Kharbanda, Tomonosuke Kikunaga, Piyush Marmat, Sai Chaitanya Susarla, Manjari Bagchi, Neelam Dhanda Batra, Arpita Choudhury, A Gopakumar, Yashwant Gupta , et al. (7 additional authors not shown)

Abstract: PSR J1713+0747 is one of the most precisely timed pulsars in the international pulsar timing array experiment. This pulsar showed an abrupt profile shape change between April 16, 2021 (MJD 59320) and April 17, 2021 (MJD 59321). In this paper, we report the results from multi-frequency observations of this pulsar carried out with the upgraded Giant Metrewave Radio Telescope (uGMRT) before and after… ▽ More PSR J1713+0747 is one of the most precisely timed pulsars in the international pulsar timing array experiment. This pulsar showed an abrupt profile shape change between April 16, 2021 (MJD 59320) and April 17, 2021 (MJD 59321). In this paper, we report the results from multi-frequency observations of this pulsar carried out with the upgraded Giant Metrewave Radio Telescope (uGMRT) before and after the event. We demonstrate the profile change seen in Band 5 (1260 MHz - 1460 MHz) and Band 3 (300 MHz - 500 MHz). The timing analysis of this pulsar shows a disturbance accompanying this profile change followed by a recovery with a timescale of $\sim 159$ days. Our data suggest that a model with chromatic index as a free parameter is preferred over models with combinations of achromaticity with DM bump or scattering bump. We determine the frequency dependence to be $\simν^{+1.34}$. △ Less

Submitted 16 August, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: Accepted for publication in MNRAS-Letters

Creating and Implementing a Smart Speaker

Authors: Sanskar Jethi, Avinash Kumar Choudhary, Yash Gupta, Abhishek Chaudhary

Abstract: We have seen significant advancements in Artificial Intelligence and Machine Learning in the 21st century. It has enabled a new technology where we can have a human-like conversation with the machines. The most significant use of this speech recognition and contextual understanding technology exists in the form of a Smart Speaker. We have a wide variety of Smart Speaker products available to us. T… ▽ More We have seen significant advancements in Artificial Intelligence and Machine Learning in the 21st century. It has enabled a new technology where we can have a human-like conversation with the machines. The most significant use of this speech recognition and contextual understanding technology exists in the form of a Smart Speaker. We have a wide variety of Smart Speaker products available to us. This paper aims to decode its creation and explain the technology that makes these Speakers, "Smart." △ Less

Submitted 30 May, 2021; originally announced June 2021.

Journal ref: IT in Industry, Vol. 9, No.3, 2021

Mechanical response of butylamine based Ruddlesden Popper organic-inorganic lead halide perovskites

Authors: Yashika Gupta, Sudharm Rathore, Aparna Singh, Anshuman Kumar

Abstract: 2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In th… ▽ More 2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n' on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental results have also been substantiated using first principle density functional theory calculations. Understanding the mechanical behaviour of 2D Ruddlesden Popper perovskites thin films in comparison with conventional 3D perovskite offers intriguing insights into the atomic layer dependent properties and paves the path for next generation mechanically durable novel devices. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Markov model with machine learning integration for fraud detection in health insurance

Authors: Rohan Yashraj Gupta, Satya Sai Mudigonda, Pallav Kumar Baruah, Phani Krishna Kandala

Abstract: Fraud has led to a huge addition of expenses in health insurance sector in India. The work is aimed to provide methods applied to health insurance fraud detection. The work presents two approaches - a markov model and an improved markov model using gradient boosting method in health insurance claims. The dataset 382,587 claims of which 38,082 claims are fraudulent. The markov based model gave the… ▽ More Fraud has led to a huge addition of expenses in health insurance sector in India. The work is aimed to provide methods applied to health insurance fraud detection. The work presents two approaches - a markov model and an improved markov model using gradient boosting method in health insurance claims. The dataset 382,587 claims of which 38,082 claims are fraudulent. The markov based model gave the accuracy of 94.07% with F1-score at 0.6683. However, the improved markov model performed much better in comparison with the accuracy of 97.10% and F1-score of 0.8546. It was observed that the improved markov model gave much lower false positives compared to markov model. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Comments: 6 pages, 10 figures

Implementation of Correlation and Regression Models for Health Insurance Fraud in Covid-19 Environment using Actuarial and Data Science Techniques

Authors: Rohan Yashraj Gupta, Satya Sai Mudigonda, Pallav Kumar Baruah, Phani Krishna Kandala

Abstract: Fraud acts as a major deterrent to a companys growth if uncontrolled. It challenges the fundamental value of Trust in the Insurance business. COVID-19 brought additional challenges of increased potential fraud to health insurance business. This work describes implementation of existing and enhanced fraud detection methods in the pre-COVID-19 and COVID-19 environments. For this purpose, we have dev… ▽ More Fraud acts as a major deterrent to a companys growth if uncontrolled. It challenges the fundamental value of Trust in the Insurance business. COVID-19 brought additional challenges of increased potential fraud to health insurance business. This work describes implementation of existing and enhanced fraud detection methods in the pre-COVID-19 and COVID-19 environments. For this purpose, we have developed an innovative enhanced fraud detection framework using actuarial and data science techniques. Triggers specific to COVID-19 are identified in addition to the existing triggers. We have also explored the relationship between insurance fraud and COVID-19. To determine this we calculated Pearson correlation coefficient and fitted logarithmic regression model between fraud in health insurance and COVID-19 cases. This work uses two datasets: health insurance dataset and Kaggle dataset on COVID-19 cases for the same select geographical location in India. Our experimental results shows Pearson correlation coefficient of 0.86, which implies that the month on month rate of fraudulent cases is highly correlated with month on month rate of COVID-19 cases. The logarithmic regression performed on the data gave the r-squared value of 0.91 which indicates that the model is a good fit. This work aims to provide much needed tools and techniques for health insurance business to counter the fraud. △ Less

Submitted 24 January, 2021; originally announced February 2021.

Journal ref: Int. J. Recent Technol. Eng. vol. 9 no. 3 pp. 699-706 Sep. 2020

Discovery and timing of three millisecond pulsars in radio and gamma-rays with the GMRT and Fermi-LAT

Authors: B. Bhattacharyya, J. Roy, T. J. Johnson, P. S. Ray, P. C. C. Freire, Y. Gupta, D. Bhattacharya, A. Kaninghat, B. W. Stappers, E. C. Ferrara, S. Sengupta, R. S. Rathour, M. Kerr, D. A. Smith, P. M. Saz Parkinson, S. M. Ransom, P. F. Michelson

Abstract: We performed deep observations to search for radio pulsations in the directions of 375 unassociated Fermi Large Area Telescope (LAT) gamma-ray sources using the Giant Metrewave Radio Telescope (GMRT) at 322 and 607 MHz. In this paper we report the discovery of three millisecond pulsars (MSPs), PSR J0248+4230, PSR J1207$-$5050 and PSR J1536$-$4948. We conducted follow up timing observations for aro… ▽ More We performed deep observations to search for radio pulsations in the directions of 375 unassociated Fermi Large Area Telescope (LAT) gamma-ray sources using the Giant Metrewave Radio Telescope (GMRT) at 322 and 607 MHz. In this paper we report the discovery of three millisecond pulsars (MSPs), PSR J0248+4230, PSR J1207$-$5050 and PSR J1536$-$4948. We conducted follow up timing observations for around 5 years with the GMRT and derived phase coherent timing models for these MSPs. PSR J0248$+$4230 and J1207$-$5050 are isolated MSPs having periodicities of 2.60 ms and 4.84 ms. PSR J1536-4948 is a 3.07 ms pulsar in a binary system with orbital period of around 62 days about a companion of minimum mass 0.32 solar mass. We also present multi-frequency pulse profiles of these MSPs from the GMRT observations. PSR J1536-4948 is an MSP with an extremely wide pulse profile having multiple components. Using the radio timing ephemeris we subsequently detected gamma-ray pulsations from these three MSPs, confirming them as the sources powering the gamma-ray emission. For PSR J1536-4948 we performed combined radio-gamma-ray timing using around 11.6 years of gamma-ray pulse times of arrivals (TOAs) along with the radio TOAs. PSR J1536-4948 also shows evidence for pulsed gamma-ray emission out to above 25 GeV, confirming earlier associations of this MSP with a >10 GeV point source. The multi-wavelength pulse profiles of all three MSPs offer challenges to models of radio and gamma-ray emission in pulsar magnetospheres. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 35 pages, 8 Figures, 4 Tables, Accepted for publication in the Astrophysical Journal

High Precision Measurements of Interstellar Dispersion Measure with the upgraded GMRT

Authors: M. A. Krishnakumar, P. K. Manoharan, Bhal Chandra Joshi, Raghav Girgaonkar, Shantanu Desai, Manjari Bagchi, K. Nobleson, Lankeswar Dey, Abhimanyu Susobhanan, Sai Chaitanya Susarla, Mayuresh P. Surnis, Yogesh Maan, A. Gopakumar, Avishek Basu, Neelam Dhanda Batra, Arpita Choudhary, Kishalay De, Yashwant Gupta, Arun Kumar Naidu, Dhruv Pathak, Jaikhomba Singha, T. Prabu

Abstract: Pulsar radio emission undergoes dispersion due to the presence of free electrons in the interstellar medium (ISM). The dispersive delay in the arrival time of pulsar signal changes over time due to the varying ISM electron column density along the line of sight. Correcting for this delay accurately is crucial for the detection of nanohertz gravitational waves using Pulsar Timing Arrays. In this wo… ▽ More Pulsar radio emission undergoes dispersion due to the presence of free electrons in the interstellar medium (ISM). The dispersive delay in the arrival time of pulsar signal changes over time due to the varying ISM electron column density along the line of sight. Correcting for this delay accurately is crucial for the detection of nanohertz gravitational waves using Pulsar Timing Arrays. In this work, we present in-band and inter-band DM estimates of four pulsars observed with uGMRT over the timescale of a year using two different template alignment methods. The DMs obtained using both these methods show only subtle differences for PSR 1713+0747 and J1909$-$3744. A considerable offset is seen in the DM of PSR J1939+2134 and J2145$-$0750 between the two methods. This could be due to the presence of scattering in the former and profile evolution in the latter. We find that both methods are useful but could have a systematic offset between the DMs obtained. Irrespective of the template alignment methods followed, the precision on the DMs obtained is about $10^{-3}$ pc cm$^{-3}$ using only BAND3 and $10^{-4}$ pc cm$^{-3}$ after combining data from BAND3 and BAND5 of the uGMRT. In a particular result, we have detected a DM excess of about $5\times10^{-3}$ pc cm$^{-3}$ on 24 February 2019 for PSR J2145$-$0750. This excess appears to be due to the interaction region created by fast solar wind from a coronal hole and a coronal mass ejection (CME) observed from the Sun on that epoch. A detailed analysis of this interesting event is presented. △ Less

Submitted 1 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 11 pages, 6 figures, 2 tables. Accepted by A&A

Journal ref: A&A 651, A5 (2021)

LOFAR Detection of 110-188 MHz Emission and Frequency-Dependent Activity from FRB 20180916B

Authors: Z. Pleunis, D. Michilli, C. G. Bassa, J. W. T. Hessels, A. Naidu, B. C. Andersen, P. Chawla, E. Fonseca, A. Gopinath, V. M. Kaspi, V. I. Kondratiev, D. Z. Li, M. Bhardwaj, P. J. Boyle, C. Brar, T. Cassanelli, Y. Gupta, A. Josephy, R. Karuppusamy, A. Keimpema, F. Kirsten, C. Leung, B. Marcote, K. Masui, R. Mckinven , et al. (10 additional authors not shown)

Abstract: FRB 20180916B is a well-studied repeating fast radio burst source. Its proximity (~150 Mpc), along with detailed studies of the bursts, have revealed many clues about its nature -- including a 16.3-day periodicity in its activity. Here we report on the detection of 18 bursts using LOFAR at 110-188 MHz, by far the lowest-frequency detections of any FRB to date. Some bursts are seen down to the lowe… ▽ More FRB 20180916B is a well-studied repeating fast radio burst source. Its proximity (~150 Mpc), along with detailed studies of the bursts, have revealed many clues about its nature -- including a 16.3-day periodicity in its activity. Here we report on the detection of 18 bursts using LOFAR at 110-188 MHz, by far the lowest-frequency detections of any FRB to date. Some bursts are seen down to the lowest-observed frequency of 110 MHz, suggesting that their spectra extend even lower. These observations provide an order-of-magnitude stronger constraint on the optical depth due to free-free absorption in the source's local environment. The absence of circular polarization and nearly flat polarization angle curves are consistent with burst properties seen at 300-1700 MHz. Compared with higher frequencies, the larger burst widths (~40-160 ms at 150 MHz) and lower linear polarization fractions are likely due to scattering. We find ~2-3 rad/m^2 variations in the Faraday rotation measure that may be correlated with the activity cycle of the source. We compare the LOFAR burst arrival times to those of 38 previously published and 22 newly detected bursts from the uGMRT (200-450 MHz) and CHIME/FRB (400-800 MHz). Simultaneous observations show 5 CHIME/FRB bursts when no emission is detected by LOFAR. We find that the burst activity is systematically delayed towards lower frequencies by ~3 days from 600 MHz to 150 MHz. We discuss these results in the context of a model in which FRB 20180916B is an interacting binary system featuring a neutron star and high-mass stellar companion. △ Less

Submitted 4 March, 2021; v1 submitted 15 December, 2020; originally announced December 2020.

Comments: Accepted for publication by ApJL

Scintillation of PSR B1508+55 -- the view from a 10,000-km baseline

Authors: V. R. Marthi, D. Simard, R. A. Main, U. -L. Pen, M. H. van Kerkwijk, K. Vanderlinde, Y. Gupta, C. Roberts, B. M. Quine

Abstract: We report on the simultaneous Giant Metrewave Radio Telescope (GMRT) and Algonquin Radio Observatory (ARO) observations at 550-750 MHz of the scintillation of PSR B1508+55, resulting in a $\sim$10,000-km baseline. This regime of measurement lies between the shorter few 100-1000~km baselines of earlier multi-station observations and the much longer earth-space baselines. We measure a scintillation… ▽ More We report on the simultaneous Giant Metrewave Radio Telescope (GMRT) and Algonquin Radio Observatory (ARO) observations at 550-750 MHz of the scintillation of PSR B1508+55, resulting in a $\sim$10,000-km baseline. This regime of measurement lies between the shorter few 100-1000~km baselines of earlier multi-station observations and the much longer earth-space baselines. We measure a scintillation cross-correlation coefficient of $0.22$, offset from zero time lag due to a $\sim 45$~s traversal time of the scintillation pattern. The scintillation time of 135~s is $3\times$ longer, ruling out isotropic as well as strictly 1D scattering. Hence, the low cross-correlation coefficient is indicative of highly anisotropic but 2D scattering. The common scintillation detected on the baseline is confined to low delays of $\lesssim 1 μ$s, suggesting that this correlation may not be associated with the parabolic scintillation arc detected at the GMRT. Detection of pulsed echoes and their direct imaging with the Low Frequency Array (LOFAR) by a different group enable them to measure a distance of 125~pc to the screen causing these echoes. These previous measurements, alongside our observations, lead us to propose that there are at least two scattering screens: the closer 125 pc screen causing the scintillation arc detected at GMRT, and a screen further beyond causing the scintillation detected on the GMRT-ARO baseline. We advance the hypothesis that the 125-pc screen partially resolves the speckle images on the screen beyond leading to loss of coherence in the scintillation dynamic spectrum, to explain the low cross-correlation coefficient. △ Less

Submitted 8 July, 2021; v1 submitted 19 October, 2020; originally announced October 2020.

Comments: 10 pages, 8 figures, accepted for publication in MNRAS

pinta: The uGMRT Data Processing Pipeline for the Indian Pulsar Timing Array

Authors: Abhimanyu Susobhanan, Yogesh Maan, Bhal Chandra Joshi, T. Prabu, Shantanu Desai, K. Nobleson, Sai Chaitanya Susarla, Raghav Girgaonkar, Lankeswar Dey, Neelam Dhanda Batra, Yashwant Gupta, A. Gopakumar, Manjari Bagchi, Avishek Basu, Suryarao Bethapudi, Arpita Choudhary, Kishalay De, M. A. Krishnakumar, P. K. Manoharan, Arun Kumar Naidu, Dhruv Pathak, Jaikhomba Singha, Mayuresh P. Surnis

Abstract: We introduce pinta, a pipeline for reducing the upgraded Giant Metre-wave Radio Telescope (uGMRT) raw pulsar timing data, developed for the Indian Pulsar Timing Array experiment. We provide a detailed description of the workflow and usage of pinta, as well as its computational performance and RFI mitigation characteristics. We also discuss a novel and independent determination of the relative time… ▽ More We introduce pinta, a pipeline for reducing the upgraded Giant Metre-wave Radio Telescope (uGMRT) raw pulsar timing data, developed for the Indian Pulsar Timing Array experiment. We provide a detailed description of the workflow and usage of pinta, as well as its computational performance and RFI mitigation characteristics. We also discuss a novel and independent determination of the relative time offsets between the different back-end modes of uGMRT and the interpretation of the uGMRT observation frequency settings, and their agreement with results obtained from engineering tests. Further, we demonstrate the capability of pinta to generate data products which can produce high-precision TOAs using PSR J1909-3744 as an example. These results are crucial for performing precision pulsar timing with the uGMRT. △ Less

Submitted 16 April, 2021; v1 submitted 6 July, 2020; originally announced July 2020.

Journal ref: Publications of the Astronomical Society of Australia, 38, E017 (2021)

Compressional-mode resonances in the molybdenum isotopes: Emergence of softness in open-shell nuclei near A=90

Authors: K. B. Howard, U. Garg, M. Itoh, H. Akimune, M. Fujiwara, T. Furuno, Y. K. Gupta, M. N. Harakeh, K. Inaba, Y. Ishibashi, K. Karasudani, T. Kawabata, A. Kohda, Y. Matsuda, M. Murata, S. Nakamura, J. Okamoto, S. Ota, J. Piekarewicz, A. Sakaue, M. Senyigit, M. Tsumura, Y. Yang

Abstract: "Why are the tin isotopes soft?" has remained, for the past decade, an open problem in nuclear structure physics: models which reproduce the isoscalar giant monopole resonance (ISGMR) in the "doubly-closed shell" nuclei, $^{90}$Zr and $^{208}$Pb, overestimate the ISGMR energies of the open-shell tin and cadmium nuclei, by as much as 1 MeV. In an effort to shed some light onto this problem, we pres… ▽ More "Why are the tin isotopes soft?" has remained, for the past decade, an open problem in nuclear structure physics: models which reproduce the isoscalar giant monopole resonance (ISGMR) in the "doubly-closed shell" nuclei, $^{90}$Zr and $^{208}$Pb, overestimate the ISGMR energies of the open-shell tin and cadmium nuclei, by as much as 1 MeV. In an effort to shed some light onto this problem, we present results of detailed studies of the ISGMR in the molybdenum nuclei, with the goal of elucidating where--and how--the softness manifests itself between $^{90}$Zr and the cadmium and tin isotopes. The experiment was conducted using the $^{94,96,98,100}$Mo($α,α^\prime$) reaction at $E_α= 386$ MeV. A comparison of the results with relativistic, self-consistent Random-Phase Approximation calculations indicates that the ISGMR response begins to show softness in the molybdenum isotopes beginning with $A=92$. △ Less

Submitted 5 July, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: Accepted for publication to Physics Letters B

Journal ref: Phys. Lett. B 807 (2020) 135608

A Compressed Sensing Approach to Pooled RT-PCR Testing for COVID-19 Detection

Authors: Sabyasachi Ghosh, Rishi Agarwal, Mohammad Ali Rehan, Shreya Pathak, Pratyush Agrawal, Yash Gupta, Sarthak Consul, Nimay Gupta, Ritika, Ritesh Goenka, Ajit Rajwade, Manoj Gopalkrishnan

Abstract: We propose `Tapestry', a novel approach to pooled testing with application to COVID-19 testing with quantitative Reverse Transcription Polymerase Chain Reaction (RT-PCR) that can result in shorter testing time and conservation of reagents and testing kits. Tapestry combines ideas from compressed sensing and combinatorial group testing with a novel noise model for RT-PCR used for generation of synt… ▽ More We propose `Tapestry', a novel approach to pooled testing with application to COVID-19 testing with quantitative Reverse Transcription Polymerase Chain Reaction (RT-PCR) that can result in shorter testing time and conservation of reagents and testing kits. Tapestry combines ideas from compressed sensing and combinatorial group testing with a novel noise model for RT-PCR used for generation of synthetic data. Unlike Boolean group testing algorithms, the input is a quantitative readout from each test and the output is a list of viral loads for each sample relative to the pool with the highest viral load. While other pooling techniques require a second confirmatory assay, Tapestry obtains individual sample-level results in a single round of testing, at clinically acceptable false positive or false negative rates. We also propose designs for pooling matrices that facilitate good prediction of the infected samples while remaining practically viable. When testing $n$ samples out of which $k \ll n$ are infected, our method needs only $O(k \log n)$ tests when using random binary pooling matrices, with high probability. However, we also use deterministic binary pooling matrices based on combinatorial design ideas of Kirkman Triple Systems to balance between good reconstruction properties and matrix sparsity for ease of pooling. In practice, we have observed the need for fewer tests with such matrices than with random pooling matrices. This makes Tapestry capable of very large savings at low prevalence rates, while simultaneously remaining viable even at prevalence rates as high as 9.5\%. Empirically we find that single-round Tapestry pooling improves over two-round Dorfman pooling by almost a factor of 2 in the number of tests required. We validate Tapestry in simulations and wet lab experiments with oligomers in quantitative RT-PCR assays. Lastly, we describe use-case scenarios for deployment. △ Less

Submitted 29 April, 2021; v1 submitted 16 May, 2020; originally announced May 2020.

Comments: Accepted for publication at IEEE Open Journal of Signal Processing

The Polarization Convention of the uGMRT in Band 4

Authors: Barnali Das, Sanjay Kudale, Poonam Chandra, Bhaswati Bhattacharya, Jayanta Roy, Yashwant Gupta

Abstract: We present an experiment performed to understand the polarization convention adopted for band 4 (550--900 MHz) of the upgraded Giant Metrewave Radio Telescope (uGMRT). For that we observed the pulsar B1702--19 in this band, both in interferometry and pulsar modes, and compare the results with its already known Stokes $I$, $Q$, $U$, $V$ profiles obtained with the Lovell telescope. We find that the… ▽ More We present an experiment performed to understand the polarization convention adopted for band 4 (550--900 MHz) of the upgraded Giant Metrewave Radio Telescope (uGMRT). For that we observed the pulsar B1702--19 in this band, both in interferometry and pulsar modes, and compare the results with its already known Stokes $I$, $Q$, $U$, $V$ profiles obtained with the Lovell telescope. We find that the results obtained from interferometry and pulsar modes of the uGMRT agree with each other. However, although the Stokes $U$ profile obtained with the uGMRT match with that obtained by the Lovell telescope, Stokes $Q$ and $V$ do not. This can be explained if the $X$ and $Y$ dipoles in this band, from which $R$ and $L$ are derived, are swapped w.r.t. the IAU convention. The swapping makes $RR^*$ and $LL^*$ of the uGMRT band 4 to be $LL^*$ and $RR^*$ respectively according to the IEEE convention. This implies that if we need to compare polarization measurements obtained in band 4 of the uGMRT with telescopes like Lovell, Parkes, Very Large Array etc. (all follow IEEE convention for defining right and left hand circular polarization), we must interchange $RR^*$ and $LL^*$, and change the sign of Stokes $Q$ for the uGMRT data. Note that this is the current convention for uGMRT band 4, and is likely to change in future once the swapping of the dipoles is taken care of. Once it is done, it will be notified in another technical report. △ Less

Submitted 18 April, 2020; originally announced April 2020.

Comments: NCRA internal technical report

Report number: R1401