Showing 1–50 of 150 results for author: Gilbert, K

Elemental Abundances in And XIX From Coadded Spectra

Authors: L. R. Cullinane, Karoline M. Gilbert, Ivanna Escala, J. Leigh Wojno, Evan N. Kirby, Kateryna A. Kvasova, Erik Tollerud, Michelle L. M. Collins, R. Michael Rich

Abstract: With a luminosity similar to that of Milky Way dwarf spheroidal (dSph) systems like Sextans, but a spatial extent similar to that of ultradiffuse galaxies (UDGs), Andromeda (And) XIX is an unusual satellite of M31. To investigate the origin of this galaxy, we measure chemical abundances for AndXIX derived from medium-resolution (R$\sim$6000) spectra from Keck II/DEIMOS. We coadd 79 red giant branc… ▽ More With a luminosity similar to that of Milky Way dwarf spheroidal (dSph) systems like Sextans, but a spatial extent similar to that of ultradiffuse galaxies (UDGs), Andromeda (And) XIX is an unusual satellite of M31. To investigate the origin of this galaxy, we measure chemical abundances for AndXIX derived from medium-resolution (R$\sim$6000) spectra from Keck II/DEIMOS. We coadd 79 red giant branch stars, grouped by photometric metallicity, in order to obtain a sufficiently high signal-to-noise ratio (S/N) to measure 20 [Fe/H] and [$α$/Fe] abundances via spectral synthesis. The latter are the first such measurements for AndXIX. The mean metallicity we derive for AndXIX places it $\sim2σ$ higher than the present-day stellar mass-metallicity relation for Local Group dwarf galaxies, potentially indicating it has experienced tidal stripping. A loss of gas and associated quenching during such a process, which prevents the extended star formation necessary to produce shallow [$α$/Fe]--[Fe/H] gradients in massive systems, is also consistent with the steeply decreasing [$α$/Fe]--[Fe/H] trend we observe. In combination with the diffuse structure and disturbed kinematic properties of AndXIX, this suggests tidal interactions, rather than galaxy mergers, are strong contenders for its formation. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 26 pages, 10 figures. Accepted by ApJ

The JWST Resolved Stellar Populations Early Release Science Program VII. Stress Testing the NIRCam Exposure Time Calculator

Authors: A. Savino, M. Gennaro, A. E. Dolphin, D. R. Weisz, M. Correnti, J. Anderson, R. Beaton, M. L. Boyer, R. E. Cohen, A. A. Cole, M. J. Durbin, C. T. Garling, M. C. Geha, K. M. Gilbert, J. Kalirai, N. Kallivayalil, K. B. W. McQuinn, M. J. B. Newman, H. Richstein, E. D. Skillman, J. T. Warfield, B. F. Williams

Abstract: We empirically assess estimates from v3.0 of the JWST NIRCam Exposure Time Calculator (ETC) using observations of resolved stars in Local Group targets taken as part of the Resolved Stellar Populations Early Release Science (ERS) Program. For bright stars, we find that: (i) purely Poissonian estimates of the signal-to-noise ratio (SNR) are in good agreement between the ETC and observations, but no… ▽ More We empirically assess estimates from v3.0 of the JWST NIRCam Exposure Time Calculator (ETC) using observations of resolved stars in Local Group targets taken as part of the Resolved Stellar Populations Early Release Science (ERS) Program. For bright stars, we find that: (i) purely Poissonian estimates of the signal-to-noise ratio (SNR) are in good agreement between the ETC and observations, but non-ideal effects (e.g., flat field uncertainties) are the current limiting factor in the photometric precision that can be achieved; (ii) source position offsets, relative to the detector pixels, have a large impact on the ETC saturation predictions and introducing sub-pixel dithers in the observation design can improve the saturation limits by up to ~1 mag. For faint stars, for which the sky dominates the error budget, we find that the choice in ETC extraction strategy (e.g., aperture size relative to point spread function size) can affect the exposure time estimates by up to a factor of 5. We provide guidelines for configuring the ETC aperture photometry to produce SNR predictions in line with the ERS data. Finally, we quantify the effects of crowding on the SNRs over a large dynamic range in stellar density and provide guidelines for approximating the effects of crowding on SNRs predicted by the ETC. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: Accepted for publication in ApJ. 18 pages, 9 Figures, 2 Tables

The JWST Resolved Stellar Populations Early Release Science Program V. DOLPHOT Stellar Photometry for NIRCam and NIRISS

Authors: Daniel R. Weisz, Andrew E. Dolphin, Alessandro Savino, Kristen B. W. McQuinn, Max J. B. Newman, Benjamin F. Williams, Nitya Kallivayalil, Jay Anderson, Martha L. Boyer, Matteo Correnti, Marla C. Geha, Karin M. Sandstrom, Andrew A. Cole, Jack T. Warfield, Evan D. Skillman, Roger E. Cohen, Rachael Beaton, Alessandro Bressan, Alberto Bolatto, Michael Boylan-Kolchin, Alyson M. Brooks, James S. Bullock, Charlie Conroy, Michael C. Cooper, Julianne J. Dalcanton , et al. (16 additional authors not shown)

Abstract: We present NIRCam and NIRISS modules for DOLPHOT, a widely-used crowded field stellar photometry package. We describe details of the modules including pixel masking, astrometric alignment, star finding, photometry, catalog creation, and artificial star tests (ASTs). We tested these modules using NIRCam and NIRISS images of M92 (a Milky Way globular cluster), Draco II (an ultra-faint dwarf galaxy),… ▽ More We present NIRCam and NIRISS modules for DOLPHOT, a widely-used crowded field stellar photometry package. We describe details of the modules including pixel masking, astrometric alignment, star finding, photometry, catalog creation, and artificial star tests (ASTs). We tested these modules using NIRCam and NIRISS images of M92 (a Milky Way globular cluster), Draco II (an ultra-faint dwarf galaxy), and WLM (a star-forming dwarf galaxy). DOLPHOT's photometry is highly precise and the color-magnitude diagrams are deeper and have better definition than anticipated during original program design in 2017. The primary systematic uncertainties in DOLPHOT's photometry arise from mismatches in the model and observed point spread functions (PSFs) and aperture corrections, each contributing $\lesssim0.01$ mag to the photometric error budget. Version 1.2 of WebbPSF models, which include charge diffusion and interpixel capacitance effects, significantly reduced PSF-related uncertainties. We also observed minor ($\lesssim0.05$ mag) chip-to-chip variations in NIRCam's zero points, which will be addressed by the JWST flux calibration program. Globular cluster observations are crucial for photometric calibration. Temporal variations in the photometry are generally $\lesssim0.01$ mag, although rare large misalignment events can introduce errors up to 0.08 mag. We provide recommended DOLPHOT parameters, guidelines for photometric reduction, and advice for improved observing strategies. Our ERS DOLPHOT data products are available on MAST, complemented by comprehensive online documentation and tutorials for using DOLPHOT with JWST imaging data. △ Less

Submitted 5 February, 2024; originally announced February 2024.

Comments: 30 pages, 17 figures. Accepted to ApJS. Data products to be hosted on MAST. For DOLPHOT/JWST tutorials, see https://dolphot-jwst.readthedocs.io/en/latest/ . For more program and DOLPHOT info, see https://ers-stars.github.io

The structure of the stellar halo of the Andromeda galaxy explored with the NB515 for Subaru/HSC. I.: New Insights on the stellar halo up to 120 kpc

Authors: Itsuki Ogami, Mikito Tanaka, Yutaka Komiyama, Masashi Chiba, Puragra Guhathakurta, Evan N. Kirby, Rosemary F. G. Wyse, Carrie Filion, Karoline M. Gilbert, Ivanna Escala, Masao Mori, Takanobu Kirihara, Masayuki Tanaka, Miho N. Ishigaki, Kohei Hayashi, Myun Gyoon Lee, Sanjib Sharma, Jason S. Kalirai, Robert H. Lupton

Abstract: We analyse the M31 halo and its substructure within a projected radius of 120 kpc using a combination of Subaru/HSC NB515 and CFHT/MegaCam g- & i-bands. We succeed in separating M31's halo stars from foreground contamination with $\sim$ 90 \% accuracy by using the surface gravity sensitive NB515 filter. Based on the selected M31 halo stars, we discover three new substructures, which associate with… ▽ More We analyse the M31 halo and its substructure within a projected radius of 120 kpc using a combination of Subaru/HSC NB515 and CFHT/MegaCam g- & i-bands. We succeed in separating M31's halo stars from foreground contamination with $\sim$ 90 \% accuracy by using the surface gravity sensitive NB515 filter. Based on the selected M31 halo stars, we discover three new substructures, which associate with the Giant Southern Stream (GSS) based on their photometric metallicity estimates. We also produce the distance and photometric metallicity estimates for the known substructures. While these quantities for the GSS are reproduced in our study, we find that the North-Western stream shows a steeper distance gradient than found in an earlier study, suggesting that it is likely to have formed in an orbit closer to the Milky Way. For two streams in the eastern halo (Stream C and D), we identify distance gradients that had not been resolved. Finally, we investigate the global halo photometric metallicity distribution and surface brightness profile using the NB515-selected halo stars. We find that the surface brightness of the metal-poor and metal-rich halo populations, and the all population can be fitted to a power-law profile with an index of $α= -1.65 \pm 0.02$, $-2.82\pm0.01$, and $-2.44\pm0.01$, respectively. In contrast to the relative smoothness of the halo profile, its photometric metallicity distribution appears to be spatially non-uniform with nonmonotonic trends with radius, suggesting that the halo population had insufficient time to dynamically homogenize the accreted populations. △ Less

Submitted 1 January, 2024; originally announced January 2024.

Comments: 24 pages, 26 figures, 5 tables, submitted to MNRAS

The JWST Resolved Stellar Populations Early Release Science Program IV: The Star Formation History of the Local Group Galaxy WLM

Authors: Kristen. B. W. McQuinn, Max J. B. Newman, Alessandro Savino, Andrew E. Dolphin, Daniel R. Weisz, Benjamin F. Williams, Martha L. Boyer, Roger E. Cohen, Matteo Correnti, Andrew A. Cole, Marla C. Geha, Mario Gennaro, Nitya Kallivayalil, Karin M. Sandstrom, Evan D. Skillman, Jay Anderson, Alberto Bolatto, Michael Boylan-Kolchin, Christopher T. Garling, Karoline M. Gilbert, Leo Girardi, Jason S. Kalirai, Alessandro Mazzi, Giada Pastorelli, Hannah Richstein , et al. (1 additional authors not shown)

Abstract: We present the first star formation history (SFH) and age-metallicity relation (AMR) derived from resolved stellar populations imaged with the JWST NIRCam instrument. The target is the Local Group star-forming galaxy WLM at 970 kpc. The depth of the color-magnitude diagram (CMD) reaches below the oldest main sequence turn-off with a SNR=10 at M_F090W=+4.6 mag; this is the deepest CMD for any galax… ▽ More We present the first star formation history (SFH) and age-metallicity relation (AMR) derived from resolved stellar populations imaged with the JWST NIRCam instrument. The target is the Local Group star-forming galaxy WLM at 970 kpc. The depth of the color-magnitude diagram (CMD) reaches below the oldest main sequence turn-off with a SNR=10 at M_F090W=+4.6 mag; this is the deepest CMD for any galaxy that is not a satellite of the Milky Way. We use Hubble Space Telescope (HST) optical imaging that overlaps with the NIRCam observations to directly evaluate the SFHs derived based on data from the two great observatories. The JWST and HST-based SFHs are in excellent agreement. We use the metallicity distribution function measured from stellar spectra to confirm the trends in the AMRs based on the JWST data. Together, these results confirm the efficacy of recovering a SFH and AMR with the NIRCam F090W-F150W filter combination and provide validation of the sensitivity and accuracy of stellar evolution libraries in the near-infrared relative to the optical for SFH recovery work. From the JWST data, WLM shows an early onset to star formation, followed by an extended pause post-reionization before star formation re-ignites, which is qualitatively similar to what has been observed in the isolated galaxies Leo~A and Aquarius. Quantitatively, 15% of the stellar mass formed in the first Gyr, while only 10% formed over the next ~5 Gyr; the stellar mass then rapidly doubled in ~2.5 Gyr, followed by constant star formation over the last ~5 Gyr. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 27 pages, 10 figures, 1 table

The Hubble Space Telescope Survey of M31 Satellite Galaxies. III. Calibrating the Horizontal Branch as an Age Indicator for Nearby Galaxies

Authors: Connor Jennings, Alessandro Savino, Daniel Weisz, Nitya Kallivayalil, Andrew Cole, Michelle Collins, Andrew Dolphin, Annette Ferguson, Karoline Gilbert, Puragra Guhathakurta, Evan Kirby, Geraint Lewis, Nicolas Martin, Michael Rich, Evan Skillman, Roeland van der Marel, Jack Warfield

Abstract: We present a new method for measuring the mean age of old/intermediate stellar populations in resolved, metal-poor ($\rm \langle[Fe/H]\rangle \lesssim -1.5$) galaxies using only the morphology of the horizontal branch (HB) and an estimate of the average metallicity. We calculate the ratio of blue-to-red HB stars and the mass-weighted mean ages of 27 M31 satellite galaxies that have star formation… ▽ More We present a new method for measuring the mean age of old/intermediate stellar populations in resolved, metal-poor ($\rm \langle[Fe/H]\rangle \lesssim -1.5$) galaxies using only the morphology of the horizontal branch (HB) and an estimate of the average metallicity. We calculate the ratio of blue-to-red HB stars and the mass-weighted mean ages of 27 M31 satellite galaxies that have star formation histories (SFHs) measured from Hubble Space Telescope-based color-magnitude diagrams (CMDs) that include the oldest Main Sequence Turn-off (MSTO) ages. We find a strong correlation between mean age, metallicity, and HB morphology, for stellar populations older than $\sim6$~Gyr. The correlation allows us to predict a galaxy's mean age from its HB morphology to a precision of $\lesssim 1$~Gyr. We validate our method by recovering the correct ages of Local Group galaxies that have robust MSTO-based ages and are not in our calibration sample. We also use our technique to measure the mean ages of isolated field galaxies KKR25 ($11.21^{+0.70}_{-0.65}$~Gyr) and VV124 ($11.03^{+0.73}_{-0.68}$~Gyr), which indicate that their main star formation episodes may have lasted several Gyr and support the picture that they achieved their early-type characteristics (e.g., low gas content, low star formation activity) in isolation and not through environment. Because the HB is $\sim80\times$ brighter than the oldest MSTO, our method can provide precise characteristic ages of predominantly old galaxies at distances $\sim 9$ times farther. We provide our calibrations in commonly used HST/ACS filters. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 21 pages, 13 figures, 5 tables, submitted to ApJ

The History and Risks of Reinforcement Learning and Human Feedback

Authors: Nathan Lambert, Thomas Krendl Gilbert, Tom Zick

Abstract: Reinforcement learning from human feedback (RLHF) has emerged as a powerful technique to make large language models (LLMs) easier to use and more effective. A core piece of the RLHF process is the training and utilization of a model of human preferences that acts as a reward function for optimization. This approach, which operates at the intersection of many stakeholders and academic disciplines,… ▽ More Reinforcement learning from human feedback (RLHF) has emerged as a powerful technique to make large language models (LLMs) easier to use and more effective. A core piece of the RLHF process is the training and utilization of a model of human preferences that acts as a reward function for optimization. This approach, which operates at the intersection of many stakeholders and academic disciplines, remains poorly understood. RLHF reward models are often cited as being central to achieving performance, yet very few descriptors of capabilities, evaluations, training methods, or open-source models exist. Given this lack of information, further study and transparency is needed for learned RLHF reward models. In this paper, we illustrate the complex history of optimizing preferences, and articulate lines of inquiry to understand the sociotechnical context of reward models. In particular, we highlight the ontological differences between costs, rewards, and preferences at stake in RLHF's foundations, related methodological tensions, and possible research directions to improve general understanding of how reward models function. △ Less

Submitted 28 November, 2023; v1 submitted 20 October, 2023; originally announced October 2023.

Comments: 14 pages, 3 figures

TREX: Kinematic Characterisation of a High-Dispersion Intermediate-Age Stellar Component in M33

Authors: L. R. Cullinane, Karoline M. Gilbert, Puragra Guhathakurta, A. C. N. Quirk, Ivanna Escala, Adam Smercina, Benjamin F. Williams, Erik Tollerud, Jessamine Qu, Kaela McConnell

Abstract: The dwarf galaxy Triangulum (M33) presents an interesting testbed for studying stellar halo formation: it is sufficiently massive so as to have likely accreted smaller satellites, but also lies within the regime where feedback and other "in-situ" formation mechanisms are expected to play a role. In this work, we analyse the line-of-sight kinematics of stars across M33 from the TREX survey with a v… ▽ More The dwarf galaxy Triangulum (M33) presents an interesting testbed for studying stellar halo formation: it is sufficiently massive so as to have likely accreted smaller satellites, but also lies within the regime where feedback and other "in-situ" formation mechanisms are expected to play a role. In this work, we analyse the line-of-sight kinematics of stars across M33 from the TREX survey with a view to understanding the origin of its halo. We split our sample into two broad populations of varying age, comprising 2032 "old" red giant branch (RGB) stars, and 671 "intermediate-age" asymptotic giant branch (AGB) and carbon stars. We find decisive evidence for two distinct kinematic components in both old and intermediate-age populations: a low-dispersion (~22 km/s) disk-like component co-rotating with M33's HI gas, and a significantly higher-dispersion component (~50-60 km/s) which does not rotate in the same plane as the gas and is thus interpreted as M33's stellar halo. While kinematically similar, the fraction of stars associated with the halo component differs significantly between the two populations: this is consistently ~10% for the intermediate age population, but decreases from ~34% to ~10% as a function of radius for the old population. We additionally find evidence that the intermediate-age halo population is systematically offset from the systemic velocity of M33 by ~25 km/s, with a preferred central LOS velocity of ~-155 km/s. This is the first detection and characterisation of an intermediate-age halo in M33, and suggests in-situ formation mechanisms, as well as potentially tidal interactions, have helped shaped it. △ Less

Submitted 8 October, 2023; originally announced October 2023.

Comments: 27 pages, 8 figures. Accepted by ApJ

The Panchromatic Hubble Andromeda Treasury: Triangulum Extended Region (PHATTER). V. The Structure of M33 in Resolved Stellar Populations

Authors: Adam Smercina, Julianne J. Dalcanton, Benjamin F. Williams, Meredith J. Durbin, Margaret Lazzarini, Eric F. Bell, Yumi Choi, Andrew Dolphin, Karoline Gilbert, Puragra Guhathakurta, Eric W. Koch, Hans-Walter Rix, Erik Rosolowsky, Anil Seth, Evan D. Skillman, Daniel R. Weisz

Abstract: We present a detailed analysis of the the structure of the Local Group flocculent spiral galaxy M33, as measured using the Panchromatic Hubble Andromeda Treasury Triangulum Extended Region (PHATTER) survey. Leveraging the multiwavelength coverage of PHATTER, we find that the oldest populations are dominated by a smooth exponential disk with two distinct spiral arms and a classical central bar $-$… ▽ More We present a detailed analysis of the the structure of the Local Group flocculent spiral galaxy M33, as measured using the Panchromatic Hubble Andromeda Treasury Triangulum Extended Region (PHATTER) survey. Leveraging the multiwavelength coverage of PHATTER, we find that the oldest populations are dominated by a smooth exponential disk with two distinct spiral arms and a classical central bar $-$ completely distinct from what is seen in broadband optical imaging, and the first-ever confirmation of a bar in M33. We estimate a bar extent of $\sim$1 kpc. The two spiral arms are asymmetric in orientation and strength, and likely represent the innermost impact of the recent tidal interaction responsible for M33's warp at larger scales. The flocculent multi-armed morphology for which M33 is known is only visible in the young upper main sequence population, which closely tracks the morphology of the ISM. We investigate the stability of M33's disk, finding $Q{\sim}1$ over the majority of the disk. We fit multiple components to the old stellar density distribution and find that, when considering recent stellar kinematics, M33's bulk structure favors the inclusion of an accreted halo component, modeled as a broken power-law. The best-fit halo model has an outer power-law index of $-$3 and accurately describes observational evidence of M33's stellar halo from both resolved stellar spectroscopy in the disk and its stellar populations at large radius. Integrating this profile yields a total halo stellar mass of ${\sim}5{\times}10^8\ M_{\odot}$, giving a total stellar halo mass fraction of 16%, most of which resides in the innermost 2.5 kpc. △ Less

Submitted 22 August, 2023; originally announced August 2023.

Comments: 31 pages, 17 figures, 5 tables, Accepted for publication in ApJ

AI and the EU Digital Markets Act: Addressing the Risks of Bigness in Generative AI

Authors: Ayse Gizem Yasar, Andrew Chong, Evan Dong, Thomas Krendl Gilbert, Sarah Hladikova, Roland Maio, Carlos Mougan, Xudong Shen, Shubham Singh, Ana-Andreea Stoica, Savannah Thais, Miri Zilka

Abstract: As AI technology advances rapidly, concerns over the risks of bigness in digital markets are also growing. The EU's Digital Markets Act (DMA) aims to address these risks. Still, the current framework may not adequately cover generative AI systems that could become gateways for AI-based services. This paper argues for integrating certain AI software as core platform services and classifying certain… ▽ More As AI technology advances rapidly, concerns over the risks of bigness in digital markets are also growing. The EU's Digital Markets Act (DMA) aims to address these risks. Still, the current framework may not adequately cover generative AI systems that could become gateways for AI-based services. This paper argues for integrating certain AI software as core platform services and classifying certain developers as gatekeepers under the DMA. We also propose an assessment of gatekeeper obligations to ensure they cover generative AI services. As the EU considers generative AI-specific rules and possible DMA amendments, this paper provides insights towards diversity and openness in generative AI services. △ Less

Submitted 7 July, 2023; originally announced August 2023.

Comments: ICML'23 Workshop Generative AI + Law (GenLaw)

Open Problems and Fundamental Limitations of Reinforcement Learning from Human Feedback

Authors: Stephen Casper, Xander Davies, Claudia Shi, Thomas Krendl Gilbert, Jérémy Scheurer, Javier Rando, Rachel Freedman, Tomasz Korbak, David Lindner, Pedro Freire, Tony Wang, Samuel Marks, Charbel-Raphaël Segerie, Micah Carroll, Andi Peng, Phillip Christoffersen, Mehul Damani, Stewart Slocum, Usman Anwar, Anand Siththaranjan, Max Nadeau, Eric J. Michaud, Jacob Pfau, Dmitrii Krasheninnikov, Xin Chen , et al. (7 additional authors not shown)

Abstract: Reinforcement learning from human feedback (RLHF) is a technique for training AI systems to align with human goals. RLHF has emerged as the central method used to finetune state-of-the-art large language models (LLMs). Despite this popularity, there has been relatively little public work systematizing its flaws. In this paper, we (1) survey open problems and fundamental limitations of RLHF and rel… ▽ More Reinforcement learning from human feedback (RLHF) is a technique for training AI systems to align with human goals. RLHF has emerged as the central method used to finetune state-of-the-art large language models (LLMs). Despite this popularity, there has been relatively little public work systematizing its flaws. In this paper, we (1) survey open problems and fundamental limitations of RLHF and related methods; (2) overview techniques to understand, improve, and complement RLHF in practice; and (3) propose auditing and disclosure standards to improve societal oversight of RLHF systems. Our work emphasizes the limitations of RLHF and highlights the importance of a multi-faceted approach to the development of safer AI systems. △ Less

Submitted 11 September, 2023; v1 submitted 27 July, 2023; originally announced July 2023.

The Panchromatic Hubble Andromeda Treasury XXI. The Legacy Resolved Stellar Photometry Catalog

Authors: Benjamin F. Williams, Meredith Durbin, Dustin Lang, Julianne J. Dalcanton, Andrew E. Dolphin, Adam Smercina, Petia Yanchulova Merica-Jones, Daniel R. Weisz, Eric F. Bell, Karoline M. Gilbert, Leo Girardi, Karl Gordon, Puragra Guhathakurta, L. Clifton Johnson, Tod R. Lauer, Anil Seth, Evan Skillman

Abstract: We present the final legacy version of stellar photometry for the Panchromatic Hubble Andromeda Treasury (PHAT) survey. We have reprocessed all of the Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) and Advanced Camera for Surveys (ACS) near ultraviolet (F275W, F336W), optical (F475W, F814W), and near infrared (F110W, F160W) imaging from the PHAT survey using an improved method that optimi… ▽ More We present the final legacy version of stellar photometry for the Panchromatic Hubble Andromeda Treasury (PHAT) survey. We have reprocessed all of the Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) and Advanced Camera for Surveys (ACS) near ultraviolet (F275W, F336W), optical (F475W, F814W), and near infrared (F110W, F160W) imaging from the PHAT survey using an improved method that optimized the survey depth and chip gap coverage by including all overlapping exposures in all bands in the photometry. An additional improvement was gained through the use of charge transfer efficiency (CTE) corrected input images, which provide more complete star finding as well as more reliable photometry for the NUV bands, which had no CTE correction in the previous version of the PHAT photometry. While this method requires significantly more computing resources and time than earlier versions where the photometry was performed on individual pointings, it results in smaller systematic instrumental completeness variations as demonstrated by cleaner maps in stellar density, and it results in optimal constraints on stellar fluxes in all bands from the survey data. Our resulting catalog has 138 million stars, 18% more than the previous catalog, with lower density regions gaining as much as 40% more stars. The new catalog produces nearly seamless population maps which show relatively well-mixed distributions for populations associated with ages older than 1-2 Gyr, and highly structured distributions for the younger populations. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 28 pages, 4 tables, 18 figures, accepted for publication in The Astrophysical Journal Supplement Series

Accountability Infrastructure: How to implement limits on platform optimization to protect population health

Authors: Nathaniel Lubin, Thomas Krendl Gilbert

Abstract: Attention capitalism has generated design processes and product development decisions that prioritize platform growth over all other considerations. To the extent limits have been placed on these incentives, interventions have primarily taken the form of content moderation. While moderation is important for what we call "acute harms," societal-scale harms -- such as negative effects on mental heal… ▽ More Attention capitalism has generated design processes and product development decisions that prioritize platform growth over all other considerations. To the extent limits have been placed on these incentives, interventions have primarily taken the form of content moderation. While moderation is important for what we call "acute harms," societal-scale harms -- such as negative effects on mental health and social trust -- require new forms of institutional transparency and scientific investigation, which we group under the term accountability infrastructure. This is not a new problem. In fact, there are many conceptual lessons and implementation approaches for accountability infrastructure within the history of public health. After reviewing these insights, we reinterpret the societal harms generated by technology platforms through reference to public health. To that end, we present a novel mechanism design framework and practical measurement methods for that framework. The proposed approach is iterative and built into the product design process, and is applicable for both internally-motivated (i.e. self regulation by companies) and externally-motivated (i.e. government regulation) interventions for a range of societal problems, including mental health. We aim to help shape a research agenda of principles for the design of mechanisms around problem areas on which there is broad consensus and a firm base of support. We offer constructive examples and discussion of potential implementation methods related to these topics, as well as several new data illustrations for potential effects of exposure to online content. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 63 pages, 5 tables and 6 figures

The Prevalence of the $α$-bimodality: First JWST $α$-abundance Results in M31

Authors: David L. Nidever, Karoline Gilbert, Erik Tollerud, Charles Siders, Ivanna Escala, Carlos Allende Prieto, Verne Smith, Katia Cunha, Victor P. Debattista, Yuan-Sen Ting, Evan N. Kirby

Abstract: We present initial results from our JWST NIRSpec program to study the $α$-abundances in the M31 disk. The Milky Way has two chemically-defined disks, the low-$α$ and high-$α$ disks, which are closely related to the thin and thick disks, respectively. The origin of the two populations and the $α$-bimodality between them is not entirely clear, although there are now several models that can reproduce… ▽ More We present initial results from our JWST NIRSpec program to study the $α$-abundances in the M31 disk. The Milky Way has two chemically-defined disks, the low-$α$ and high-$α$ disks, which are closely related to the thin and thick disks, respectively. The origin of the two populations and the $α$-bimodality between them is not entirely clear, although there are now several models that can reproduce the observed features. To help constrain the models and discern the origin, we have undertaken a study of the chemical abundances of the M31 disk using JWST NIRSpec, in order to determine whether stars in M31's disk also show an $α$-abundance bimodality. Approximately 100 stars were observed in our single NIRSpec field at a projected distance of 18 kpc from the M31 center. The 1-D extracted spectra have an average signal-to-noise ratio of 85 leading to statistical metallicity precision of 0.016 dex, $α$-abundance precision of 0.012 dex, and a radial velocity precision 8 km/s. The initial results indicate that, in contrast to the Milky Way, there is no $α$-bimodality in the M31 disk, and no low-$α$ sequence. The entire stellar population falls along a single chemical sequence very similar to the MW's high-alpha component which had a high star formation rate. While this is somewhat unexpected, the result is not that surprising based on other studies that found the M31 disk has a larger velocity dispersion than the MW and is dominated by a thick component. M31 has had a more active accretion and merger history than the MW which might explain the chemical differences. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Comments: 8 pages, 4 figures, IAU Symposium 377, Early Disk-Galaxy Formation: From JWST to the Milky Way

Optimization's Neglected Normative Commitments

Authors: Benjamin Laufer, Thomas Krendl Gilbert, Helen Nissenbaum

Abstract: Optimization is offered as an objective approach to resolving complex, real-world decisions involving uncertainty and conflicting interests. It drives business strategies as well as public policies and, increasingly, lies at the heart of sophisticated machine learning systems. A paradigm used to approach potentially high-stakes decisions, optimization relies on abstracting the real world to a set… ▽ More Optimization is offered as an objective approach to resolving complex, real-world decisions involving uncertainty and conflicting interests. It drives business strategies as well as public policies and, increasingly, lies at the heart of sophisticated machine learning systems. A paradigm used to approach potentially high-stakes decisions, optimization relies on abstracting the real world to a set of decision(s), objective(s) and constraint(s). Drawing from the modeling process and a range of actual cases, this paper describes the normative choices and assumptions that are necessarily part of using optimization. It then identifies six emergent problems that may be neglected: 1) Misspecified values can yield optimizations that omit certain imperatives altogether or incorporate them incorrectly as a constraint or as part of the objective, 2) Problematic decision boundaries can lead to faulty modularity assumptions and feedback loops, 3) Failing to account for multiple agents' divergent goals and decisions can lead to policies that serve only certain narrow interests, 4) Mislabeling and mismeasurement can introduce bias and imprecision, 5) Faulty use of relaxation and approximation methods, unaccompanied by formal characterizations and guarantees, can severely impede applicability, and 6) Treating optimization as a justification for action, without specifying the necessary contextual information, can lead to ethically dubious or faulty decisions. Suggestions are given to further understand and curb the harms that can arise when optimization is used wrongfully. △ Less

Submitted 28 July, 2023; v1 submitted 27 May, 2023; originally announced May 2023.

Comments: 14 pages, 1 figure, presentation at FAccT23

The Hubble Space Telescope Survey of M31 Satellite Galaxies II. The Star Formation Histories of Ultra-Faint Dwarf Galaxies

Authors: A. Savino, D. R. Weisz, E. D. Skillman, A. Dolphin, A. A. Cole, N. Kallivayalil, A. Wetzel, J. Anderson, G. Besla, M. Boylan-Kolchin, T. M. Brown, J. S. Bullock, M. L. M. Collins, M. C. Cooper, A. J. Deason, A. L. Dotter, M. Fardal, A. M. N. Ferguson, T. K. Fritz, M. C. Geha, K. M. Gilbert, P. Guhathakurta, R. Ibata, M. J. Irwin, M. Jeon , et al. (12 additional authors not shown)

Abstract: We present the lifetime star formation histories (SFHs) for six ultra-faint dwarf (UFD; $M_V>-7.0$, $ 4.9<\log_{10}({M_*(z=0)}/{M_{\odot}})<5.5$) satellite galaxies of M31 based on deep color-magnitude diagrams constructed from \textit{Hubble Space Telescope} imaging. These are the first SFHs obtained from the oldest main sequence turn-off of UFDs outside the halo of the Milky Way (MW). We find th… ▽ More We present the lifetime star formation histories (SFHs) for six ultra-faint dwarf (UFD; $M_V>-7.0$, $ 4.9<\log_{10}({M_*(z=0)}/{M_{\odot}})<5.5$) satellite galaxies of M31 based on deep color-magnitude diagrams constructed from \textit{Hubble Space Telescope} imaging. These are the first SFHs obtained from the oldest main sequence turn-off of UFDs outside the halo of the Milky Way (MW). We find that five UFDs formed at least 50\% of their stellar mass by $z=5$ (12.6~Gyr ago), similar to known UFDs around the MW, but that 10-40\% of their stellar mass formed at later times. We uncover one remarkable UFD, \A{XIII}, which formed only 10\% of its stellar mass by $z=5$, and 75\% in a rapid burst at $z\sim2-3$, a result that is robust to choices of underlying stellar model and is consistent with its predominantly red horizontal branch. This "young" UFD is the first of its kind and indicates that not all UFDs are necessarily quenched by reionization, which is consistent with predictions from several cosmological simulations of faint dwarf galaxies. SFHs of the combined MW and M31 samples suggest reionization did not homogeneously quench UFDs. We find that the least massive MW UFDs ($M_*(z=5) \lesssim 5\times10^4 M_{\odot}$) are likely quenched by reionization, whereas more massive M31 UFDs ($M_*(z=5) \gtrsim 10^5 M_{\odot}$) may only have their star formation suppressed by reionization and quench at a later time. We discuss these findings in the context of the evolution and quenching of UFDs. △ Less

Submitted 13 September, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Comments: 18 pages, 14 figures, 5 appendices, accepted for publication in ApJ

Capacitor Optimization in Power Distribution Networks Using Numerical Computation Techniques

Authors: Jordan R. Keuseman, Chad M. Smutzer, Clifton R Haider, Barry K. Gilbert

Abstract: This paper presents a power distribution network (PDN) decoupling capacitor optimization application with three primary goals: reduction of solution times for large networks, development of flexible network scoring routines, and a concentration strictly on achieving the best network performance. Example optimizations are performed using broadband models of a printed circuit board (PCB), a chip-pac… ▽ More This paper presents a power distribution network (PDN) decoupling capacitor optimization application with three primary goals: reduction of solution times for large networks, development of flexible network scoring routines, and a concentration strictly on achieving the best network performance. Example optimizations are performed using broadband models of a printed circuit board (PCB), a chip-package, on-die networks, and candidate capacitors. A novel worst-case time-domain optimization technique is presented as an alternative to the traditional frequency-domain approach. The trade-offs and criteria for scoring the computed network are presented. The output is a recommended set of capacitors which can then be applied to the product design. △ Less

Submitted 17 January, 2023; originally announced May 2023.

Comments: 24 pages, 13 figures, DesignCon 2021

Efficient Circuit-Level Implementation of Knuth-Based Balanced and Nearly-Balanced Codes

Authors: Pamela A. Riggs, Barry K. Gilbert, Erik S. Daniel

Abstract: Coding schemes are often used in high-speed processor-processor or processor-memory busses in digital systems. In particular, we have introduced (in a 2012 DesignCon paper) a zero sum (ZS) signaling method which uses balanced or nearly-balanced coding to reduce simultaneous switching noise (SSN) in a single-ended bus to a level comparable to that of differential signaling. While several balanced c… ▽ More Coding schemes are often used in high-speed processor-processor or processor-memory busses in digital systems. In particular, we have introduced (in a 2012 DesignCon paper) a zero sum (ZS) signaling method which uses balanced or nearly-balanced coding to reduce simultaneous switching noise (SSN) in a single-ended bus to a level comparable to that of differential signaling. While several balanced coding schemes are known, few papers exist that describe the necessary digital hardware implementations of (known) balanced coding schemes, and no algorithms had previously been developed for nearly-balanced coding. In this work, we extend a known balanced coding scheme to accommodate nearly-balanced coding and demonstrate a range of coding and decoding circuits through synthesis in 65 nm CMOS. These hardware implementations have minimal impact on the energy efficiency and area when compared to current serializer/deserializers (SerDes) at clock rates which would support SerDes integration. △ Less

Submitted 17 January, 2023; originally announced April 2023.

Comments: 23 pages, 12 figures, DesignCon 2014

The James Webb Space Telescope Mission

Authors: Jonathan P. Gardner, John C. Mather, Randy Abbott, James S. Abell, Mark Abernathy, Faith E. Abney, John G. Abraham, Roberto Abraham, Yasin M. Abul-Huda, Scott Acton, Cynthia K. Adams, Evan Adams, David S. Adler, Maarten Adriaensen, Jonathan Albert Aguilar, Mansoor Ahmed, Nasif S. Ahmed, Tanjira Ahmed, Rüdeger Albat, Loïc Albert, Stacey Alberts, David Aldridge, Mary Marsha Allen, Shaune S. Allen, Martin Altenburg , et al. (983 additional authors not shown)

Abstract: Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono… ▽ More Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

Plated-Through-Hole Via Design Specifications for 112G Serial Links

Authors: Michael J. Degerstrom, Chad M. Smutzer, Richard B. Ericson, Clifton R Haider, Barry K. Gilbert

Abstract: An earlier study of a high layer-count test board using plated-through-hole (PTH) vias and a limited quantity of laser vias was shown to be capable of supporting 112 Gb/s PAM-4 links (or equivalent signaling having 28 GHz (Nyquist) bandwidth). This original board design was then rebuilt using a different fabricator, and the test results revealed a significant decrease in the bandwidth of the vias.… ▽ More An earlier study of a high layer-count test board using plated-through-hole (PTH) vias and a limited quantity of laser vias was shown to be capable of supporting 112 Gb/s PAM-4 links (or equivalent signaling having 28 GHz (Nyquist) bandwidth). This original board design was then rebuilt using a different fabricator, and the test results revealed a significant decrease in the bandwidth of the vias. These results led to the development of a set of design specifications that PCB vendors can easily validate, which will ensure that the use of high layer-count boards with PTH technology are viable for emerging 112 Gb/s PAM-4 links. △ Less

Submitted 17 January, 2023; originally announced April 2023.

Comments: 20 pages, 16 figures, DesignCon 2017

Inverting the SerDes Link Design Flow Process

Authors: Michael J. Degerstrom, Chad M. Smutzer, Patrick J. Zabinski, Barry K. Gilbert

Abstract: The traditional SerDes link simulation process begins with the extraction of printed circuit board (PCB) physical stripline and via models, followed by channel modeling and link simulation. We invert this simulation flow by first creating link performance curves across an array of hypothetical channels defined with specially-developed, high level, equation-based models; limited physical extraction… ▽ More The traditional SerDes link simulation process begins with the extraction of printed circuit board (PCB) physical stripline and via models, followed by channel modeling and link simulation. We invert this simulation flow by first creating link performance curves across an array of hypothetical channels defined with specially-developed, high level, equation-based models; limited physical extraction is later undertaken to relate PCB channel implementation to these performance curves. These curves allow us to determine the system-level SerDes channel requirements and to become better informed in choosing PCB technologies for lower cost and easier manufacturability. The inverted modeling process is very efficient, allowing for the rapid identification and avoidance of problematic channel topologies and the study of other potentially useful channel designs. △ Less

Submitted 17 January, 2023; originally announced April 2023.

Comments: 24 pages, 18 figures, DesignCon 2017

56 Gbps PCB Design Strategies for Clean, Low-Skew Channels

Authors: Michael J. Degerstrom, Chad M. Smutzer, Barry K. Gilbert, Erik S. Daniel

Abstract: Although next generation (>28 Gbps) SerDes standards have been contemplated for several years, it has not been clear whether PCB structures supporting 56 Gbps NRZ will be feasible and practical. In this paper, we assess a number of specific PCB design strategies (related to pin-field breakouts, via stubs, and fiber weave skew) both through simulation and through measurement of a wide range of stru… ▽ More Although next generation (>28 Gbps) SerDes standards have been contemplated for several years, it has not been clear whether PCB structures supporting 56 Gbps NRZ will be feasible and practical. In this paper, we assess a number of specific PCB design strategies (related to pin-field breakouts, via stubs, and fiber weave skew) both through simulation and through measurement of a wide range of structures on a PCB test vehicle. We demonstrate that conventional approaches in many cases will not be sufficient, but that modest (manufacturable) design changes can enable low-skew 56 Gbps NRZ channels having acceptable insertion and return loss. △ Less

Submitted 17 January, 2023; originally announced April 2023.

Comments: 25 pages, 19 figures, DesignCon 2016

Dynamic Documentation for AI Systems

Authors: Soham Mehta, Anderson Rogers, Thomas Krendl Gilbert

Abstract: AI documentation is a rapidly-growing channel for coordinating the design of AI technologies with policies for transparency and accessibility. Calls to standardize and enact documentation of algorithmic harms and impacts are now commonplace. However, documentation standards for AI remain inchoate, and fail to match the capabilities and social effects of increasingly impactful architectures such as… ▽ More AI documentation is a rapidly-growing channel for coordinating the design of AI technologies with policies for transparency and accessibility. Calls to standardize and enact documentation of algorithmic harms and impacts are now commonplace. However, documentation standards for AI remain inchoate, and fail to match the capabilities and social effects of increasingly impactful architectures such as Large Language Models (LLMs). In this paper, we show the limits of present documentation protocols, and argue for dynamic documentation as a new paradigm for understanding and evaluating AI systems. We first review canonical approaches to system documentation outside the context of AI, focusing on the complex history of Environmental Impact Statements (EISs). We next compare critical elements of the EIS framework to present challenges with algorithmic documentation, which have inherited the limitations of EISs without incorporating their strengths. These challenges are specifically illustrated through the growing popularity of Model Cards and two case studies of algorithmic impact assessment in China and Canada. Finally, we evaluate more recent proposals, including Reward Reports, as potential components of fully dynamic AI documentation protocols. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Beyond Bias and Compliance: Towards Individual Agency and Plurality of Ethics in AI

Authors: Thomas Krendl Gilbert, Megan Welle Brozek, Andrew Brozek

Abstract: AI ethics is an emerging field with multiple, competing narratives about how to best solve the problem of building human values into machines. Two major approaches are focused on bias and compliance, respectively. But neither of these ideas fully encompasses ethics: using moral principles to decide how to act in a particular situation. Our method posits that the way data is labeled plays an essent… ▽ More AI ethics is an emerging field with multiple, competing narratives about how to best solve the problem of building human values into machines. Two major approaches are focused on bias and compliance, respectively. But neither of these ideas fully encompasses ethics: using moral principles to decide how to act in a particular situation. Our method posits that the way data is labeled plays an essential role in the way AI behaves, and therefore in the ethics of machines themselves. The argument combines a fundamental insight from ethics (i.e. that ethics is about values) with our practical experience building and scaling machine learning systems. We want to build AI that is actually ethical by first addressing foundational concerns: how to build good systems, how to define what is good in relation to system architecture, and who should provide that definition. Building ethical AI creates a foundation of trust between a company and the users of that platform. But this trust is unjustified unless users experience the direct value of ethical AI. Until users have real control over how algorithms behave, something is missing in current AI solutions. This causes massive distrust in AI, and apathy towards AI ethics solutions. The scope of this paper is to propose an alternative path that allows for the plurality of values and the freedom of individual expression. Both are essential for realizing true moral character. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Comments: 29 pages total, 1 table, 9 figures

A Zero Sum Signaling Method for High Speed, Dense Parallel Bus Communications

Authors: Chad M. Smutzer, Robert W. Techentin, Michael J. Degerstrom, Barry K. Gilbert, Erik S. Daniel

Abstract: Complex digital systems such as high performance computers (HPCs) make extensive use of high-speed electrical interconnects, in routing signals among processing elements, or between processing elements and memory. Despite increases in serializer/deserializer (SerDes) and memory interface speeds, there is demand for higher bandwidth busses in constrained physical spaces which still mitigate simulta… ▽ More Complex digital systems such as high performance computers (HPCs) make extensive use of high-speed electrical interconnects, in routing signals among processing elements, or between processing elements and memory. Despite increases in serializer/deserializer (SerDes) and memory interface speeds, there is demand for higher bandwidth busses in constrained physical spaces which still mitigate simultaneous switching noise (SSN). The concept of zero sum signaling utilizes coding across a data bus to allow the use of single-ended buffers while still mitigating SSN, thereby reducing the number of physical channels (e.g. circuit board traces) by nearly a factor of two when compared with traditional differential signaling. Through simulation and analysis of practical (non-ideal) data bus and power delivery network architectures, we demonstrate the feasibility of zero sum signaling and compare performance with that of traditional (single-ended and differential) methods. △ Less

Submitted 17 January, 2023; originally announced February 2023.

Comments: 24 pages, 11 figures, DesignCon 2012

Introduction to Non-Invasive Current Estimation (NICE)

Authors: Jonathan L. Fasig, Christopher K. White, Barry K. Gilbert, Clifton R. Haider

Abstract: It is notoriously difficult to measure instantaneous supply current to a device such as an ASIC, FPGA, or CPU without also affecting the instantaneous supply voltage and compromising the operation of the device [21]. For decades designers have relied on rough estimates of dynamic load currents that stimulate a designed Power Delivery Network (PDN). The consequences of inaccurate load-current chara… ▽ More It is notoriously difficult to measure instantaneous supply current to a device such as an ASIC, FPGA, or CPU without also affecting the instantaneous supply voltage and compromising the operation of the device [21]. For decades designers have relied on rough estimates of dynamic load currents that stimulate a designed Power Delivery Network (PDN). The consequences of inaccurate load-current characterization can range from excessive PDN cost and lengthened development schedules to poor performance or functional failure. This paper will introduce and describe a method to precisely determine timedomain current waveforms from a pair of measured timedomain voltage waveforms. This NonInvasive Current Estimation (NICE) method is based on established twoport network theory along with component and board modeling techniques that have been validated through measurements on demonstrative circuits. This paper will show that the NICE method works for any transient event that can be captured on a digital oscilloscope. Limitations of the method and underlying measurements are noted where appropriate. The method is applied to a simple PDN with an arbitrary load, and the NICE-derived current waveform is verified against an independent measurement by sense resistor. With careful component and board modeling, it is possible to calculate current waveforms with a root mean square error of less than five percent compared to the reference measurement. Current transients that were previously difficult or impossible to characterize by any means can now be calculated and displayed within seconds of an oscilloscope-trigger event by using NICE. ASIC and FPGA manufacturers can now compute the startup current for their device and publish the actual waveform, or provide a piecewiselinear SPICE model (PWL source) to facilitate design and testing of the regulator and PDN required to support their device. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 26 pages, 28 figures, DesignCon 2018

PWB Manufacturing Variability Effects on High Speed SerDes Links: Statistical Insights from Thousands of 4-Port SParameter Measurements

Authors: Bart O. McCoy, Robert W. Techentin, Benjamin R. Buhrow, Kevin Buchs, How Lin, Barry K. Gilbert, Erik S. Daniel

Abstract: Variability analysis is important in successfully deploying multi-gigabit backplane printed wiring boards (PWBs) with growing numbers of high-speed SerDes links. We discuss the need for large sample sizes to obtain accurate variability estimates of SI metrics (eye height, phase skew, etc). Using a dataset of 11,961 S-parameters, we demonstrate statistical techniques to extract accurate estimates… ▽ More Variability analysis is important in successfully deploying multi-gigabit backplane printed wiring boards (PWBs) with growing numbers of high-speed SerDes links. We discuss the need for large sample sizes to obtain accurate variability estimates of SI metrics (eye height, phase skew, etc). Using a dataset of 11,961 S-parameters, we demonstrate statistical techniques to extract accurate estimates of PWB SI performance variations. We cite numerical examples illustrating how these variations may contribute to underestimated or overestimated design criteria, causing unnecessary design expense. Tabular summaries of performance variation and key findings of broad interest to the general SI community are highlighted. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 25 pages, 1 figures, DesignCon 2010

High Speed Parallel Signal Crosstalk Cancellation Concept

Authors: Chad M. Smutzer, Michael J. Degerstrom, Barry K. Gilbert, Erik S. Daniel

Abstract: High performance computing (HPC) systems make extensive use of high speed electrical interconnects, in routing signals among processing elements, or between processing elements and memory. Increasing bandwidth demands result in high density, parallel I/O exposed to crosstalk due to tightly coupled transmission lines. The crosstalk cancellation signaling concept discussed in this paper utilizes the… ▽ More High performance computing (HPC) systems make extensive use of high speed electrical interconnects, in routing signals among processing elements, or between processing elements and memory. Increasing bandwidth demands result in high density, parallel I/O exposed to crosstalk due to tightly coupled transmission lines. The crosstalk cancellation signaling concept discussed in this paper utilizes the known, predictable theory of coupled transmission lines to cancel crosstalk from neighboring traces with carefully chosen resistive cross-terminations between them. Through simulation and analysis of practical bus architectures, we explore the merits of crosstalk cancellation which could be used in dense interconnect HPC (or other) applications. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 25 pages, 12 figures, DesignCon 2011

Comparison of Optical and Electrical Links for Highly-Interconnected Systems

Authors: James Kruchowski, Vladimir Sokolov, Nathan E. Harff, Mark A. Nelson, KY Liou, Graham Cameron, Barry K. Gilbert, Erik S. Daniel

Abstract: As data rates for multi-gigabit serial interfaces within multi-node compute systems approach and exceed 10 Gigabits per second (Gbps), board-to-board and chip-to-chip optical signaling solutions become more attractive, particularly for longer (e.g. 50-100 cm) links. The transition to optical signaling will potentially allow new high performance compute (HPC) system architectures that benefit from… ▽ More As data rates for multi-gigabit serial interfaces within multi-node compute systems approach and exceed 10 Gigabits per second (Gbps), board-to-board and chip-to-chip optical signaling solutions become more attractive, particularly for longer (e.g. 50-100 cm) links. The transition to optical signaling will potentially allow new high performance compute (HPC) system architectures that benefit from characteristics unique to optical links. To examine these characteristics, we built and tested several optical demonstration vehicles; one based on dense wavelength division multiplexing (DWDM), and others based on multiple point-to-point links carried across multimode fibers. All test vehicles were constructed to evaluate applicability to a multi-node compute system. Test results, combined with data from recent research efforts are summarized and compared to equivalent electrical links and the advantages and design characteristics unique to optical signaling are identified. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 25 pages, 18 figures, DesignCon 2011

Applications of Optimization Routines in Signal Integrity Analysis

Authors: Pat J. Zabinski, Ben R. Buhrow, Barry K. Gilbert, Erik S. Daniel

Abstract: Signal integrity analysis often involves the development of design guidelines through manual manipulation of circuit parameters and judicious interpretation of results. Such an approach can result in significant effort and sub-optimal conclusions. Optimization routines have been well proven to aid analysis across a variety of common tasks. In addition, there are several non-traditional application… ▽ More Signal integrity analysis often involves the development of design guidelines through manual manipulation of circuit parameters and judicious interpretation of results. Such an approach can result in significant effort and sub-optimal conclusions. Optimization routines have been well proven to aid analysis across a variety of common tasks. In addition, there are several non-traditional applications where optimization can be useful. This paper begins by describing the basics of optimization followed by two specific case studies where non-traditional optimization provides significant improvements in both analysis efficiency and channel performance. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 24 pages, 14 figures, DesignCon 2007

Correction of high-order phase variation effects in dynamic field monitoring

Authors: Paul I. Dubovan, Kyle M. Gilbert, Corey A. Baron

Abstract: Purpose: Field monitoring measures field perturbations, which can be accounted for during image reconstructions. In certain field monitoring environments, significant phase deviations can arise far from isocenter due to the finite extent of the gradient and/or main magnet. This can degrade the accuracy of field dynamics when field probes are placed near or outside the diameter spherical volume of… ▽ More Purpose: Field monitoring measures field perturbations, which can be accounted for during image reconstructions. In certain field monitoring environments, significant phase deviations can arise far from isocenter due to the finite extent of the gradient and/or main magnet. This can degrade the accuracy of field dynamics when field probes are placed near or outside the diameter spherical volume of the gradient coils and/or main magnet, leading to corrupted image quality. The objective of this work was to develop a correction algorithm that reduces errors from highly nonlinear phase variations at distant field probes in field dynamic fits. Methods: The algorithm is split into three components. Component one fits phase coefficients one spatial order at a time, while the second implements a weighted least squares solution based on probe distance. After initial fitting, component three calculates phase residuals and removes the phase for distant probes before re-fitting. Two healthy volunteers were scanned on a head-only 7T MRI using diffusion-weighted single-shot spiral and EPI sequences and field monitoring was performed. Images were reconstructed with and without phase coefficient correction and compared qualitatively. Results: The algorithm was able to correct corrupted field dynamics, resulting in image quality improvements. Significant artefact reduction was observed when correcting higher order fits, especially for diffusion weighted images. Stepwise fitting provided the most correction benefit, which was marginally improved when adding weighted least squares and phase residual corrections. Conclusion: The proposed algorithm can mitigate effects of phase errors in field monitoring, providing improved reliability of field dynamic characterization. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Comments: 34 pages, 8 figures, 3 supplementary figures, 3 videos (not included)

Power Supply Compensation for Capacitive Loads

Authors: Jonathan L. Fasig, Barry K. Gilbert, Erik S. Daniel

Abstract: As ASIC supply voltages approach one volt, the source-impedance goals for power distribution networks are driven ever lower as well. One approach to achieving these goals is to add decoupling capacitors of various values until the desired impedance profile is obtained. An unintended consequence of this approach can be reduced power supply stability and even oscillation. In this paper, we present a… ▽ More As ASIC supply voltages approach one volt, the source-impedance goals for power distribution networks are driven ever lower as well. One approach to achieving these goals is to add decoupling capacitors of various values until the desired impedance profile is obtained. An unintended consequence of this approach can be reduced power supply stability and even oscillation. In this paper, we present a case study of a system design which encountered these problems and we describe how these problems were resolved. Time-domain and frequency-domain analysis techniques are discussed and measured data is presented. △ Less

Submitted 17 January, 2023; originally announced January 2023.

Comments: 14 pages, 9 figures, DesignCon 2007

Time Domain Verification of Differential Transmission Line Modeling Methods

Authors: Jonathan D. Coker, Erik S. Daniel, Barry K. Gilbert

Abstract: The advantages and limitations of time-domain pseudo-random binary sequence (PRBS) excitation methods for system identification of individual modes within a multi-conductor transmission system are discussed. We develop the modifications necessary to standard frequency-domain transmission-line models to match time-domain experimental data from several types of transmission systems. We show a variet… ▽ More The advantages and limitations of time-domain pseudo-random binary sequence (PRBS) excitation methods for system identification of individual modes within a multi-conductor transmission system are discussed. We develop the modifications necessary to standard frequency-domain transmission-line models to match time-domain experimental data from several types of transmission systems. We show a variety of experimental results showing very good to excellent agreement with our model's predictions, up to approximately 10 GHz. △ Less

Submitted 12 January, 2023; originally announced January 2023.

Comments: 25 pages, 10 figures, DesignCon 2006

The JWST Resolved Stellar Populations Early Release Science Program II. Survey Overview

Authors: Daniel R. Weisz, Kristen B. W. McQuinn, Alessandro Savino, Nitya Kallivayalil, Jay Anderson, Martha L. Boyer, Matteo Correnti, Marla C. Geha, Andrew E. Dolphin, Karin M. Sandstrom, Andrew A. Cole, Benjamin F. Williams, Evan D. Skillman, Roger E. Cohen, Max J. B. Newman, Rachael Beaton, Alessandro Bressan, Alberto Bolatto, Michael Boylan-Kolchin, Alyson M. Brooks, James S. Bullock, Charlie Conroy, M. C. Cooper, Julianne J. Dalcanton, Aaron L. Dotter , et al. (17 additional authors not shown)

Abstract: We present the JWST Resolved Stellar Populations Early Release Science (ERS) science program. We obtained 27.5 hours of NIRCam and NIRISS imaging of three targets in the Local Group (Milky Way globular cluster M92, ultra-faint dwarf galaxy Draco II, star-forming dwarf galaxy WLM), which span factors of $\sim10^5$ in luminosity, $\sim10^4$ in distance, and $\sim10^5$ in surface brightness. We descr… ▽ More We present the JWST Resolved Stellar Populations Early Release Science (ERS) science program. We obtained 27.5 hours of NIRCam and NIRISS imaging of three targets in the Local Group (Milky Way globular cluster M92, ultra-faint dwarf galaxy Draco II, star-forming dwarf galaxy WLM), which span factors of $\sim10^5$ in luminosity, $\sim10^4$ in distance, and $\sim10^5$ in surface brightness. We describe the survey strategy, scientific and technical goals, implementation details, present select NIRCam color-magnitude diagrams (CMDs), and validate the NIRCam exposure time calculator (ETC). Our CMDs are among the deepest in existence for each class of target. They touch the theoretical hydrogen burning limit in M92 ($<0.08$ $M_{\odot}$; SNR $\sim5$ at $m_{F090W}\sim28.2$; $M_{F090W}\sim+13.6$), include the lowest-mass stars observed outside the Milky Way in Draco II (0.09 $M_{\odot}$; SNR $=10$ at $m_{F090W}\sim29$; $M_{F090W}\sim+12.1$), and reach $\sim1.5$ magnitudes below the oldest main sequence turnoff in WLM (SNR $=10$ at $m_{F090W}\sim29.5$; $M_{F090W}\sim+4.6$). The PARSEC stellar models provide a good qualitative match to the NIRCam CMDs, though are $\sim0.05$ mag too blue compared to M92 F090W$-$F150W data. The NIRCam ETC (v2.0) matches the SNRs based on photon noise from DOLPHOT stellar photometry in uncrowded fields, but the ETC may not be accurate in more crowded fields, similar to what is known for HST. We release beta versions of DOLPHOT NIRCam and NIRISS modules to the community. Results from this ERS program will establish JWST as the premier instrument for resolved stellar populations studies for decades to come. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 23 pages, 7 Figures, 3 Tables. Submitted to AAS Journals. Comments welcome

Measuring Physical and Electrical Parameters in Free-Living Subjects: Motivating an Instrument to Characterize Analytes of Clinical Importance in Blood Samples

Authors: Barry K. Gilbert, Clifton R. Haider, Daniel J. Schwab, Gary S. Delp

Abstract: Significance: A path is described to increase the sensitivity and accuracy of body-worn devices used to monitor patient health. This path supports improved health management. A wavelength-choice algorithm developed at Mayo demonstrates that critical biochemical analytes can be assessed using accurate optical absorption curves over a wide range of wavelengths. Aim: Combine the requirements for moni… ▽ More Significance: A path is described to increase the sensitivity and accuracy of body-worn devices used to monitor patient health. This path supports improved health management. A wavelength-choice algorithm developed at Mayo demonstrates that critical biochemical analytes can be assessed using accurate optical absorption curves over a wide range of wavelengths. Aim: Combine the requirements for monitoring cardio/electrical, movement, activity, gait, tremor, and critical biochemical analytes including hemoglobin makeup in the context of body-worn sensors. Use the data needed to characterize clinically important analytes in blood samples to drive instrument requirements. Approach: Using data and knowledge gained over previously separate research threads, some providing currently usable results from more than eighty years back, determine analyte characteristics needed to design sensitive and accurate multiuse measurement and recording units. Results: Strategies for wavelength selection are detailed. Fine-grained, broad-spectrum measurement of multiple analytes transmission, absorption, and anisotropic scattering are needed. Post-Beer-Lambert, using the propagation of error from small variations, and utility functions that include costs and systemic error sources, improved measurements can be performed. Conclusions: The Mayo Double-Integrating Sphere Spectrophotometer (referred hereafter as MDISS), as described in the companion report arXiv:2212.08763, produces the data necessary for optimal component choice. These data can provide for robust enhancement of the sensitivity, cost, and accuracy of body-worn medical sensors. Keywords: Bio-Analyte, Spectrophotometry, Body-worn monitor, Propagation of error, Double-Integrating Sphere, Mt. Everest medical measurements, O2SAT Please see also arXiv:2212.08763 △ Less

Submitted 6 January, 2023; v1 submitted 2 January, 2023; originally announced January 2023.

Comments: 18 pages 7 figures, Mayo Clinic SPPDG Technical Report: Posted in conjunction with DJ Schwab, CR Haider, GS Delp, SK Grebe, and BK Gilbert, "An Experimental Double-Integrating Sphere Spectrophotometer for in Vitro Optical Analysis of Blood and Tissue Samples, Including Examples of Analyte Measurement Results," arXiv:2212.08763

Report number: Mayo-SPPDG-R22-15-V02

An Experimental Double-Integrating Sphere Spectrophotometer for In Vitro Optical Analysis of Blood and Tissue Samples, Including Examples of Analyte Measurement Results

Authors: Daniel J. Schwab, Clifton R. Haider, Gary S. Delp, Stefan K. Grebe, Barry K. Gilbert

Abstract: Data-driven science requires data to drive it. Being able to make accurate and precise measurement of biomaterials in the body means that medical assessments can be more accurate. There are differences between how blood absorbs and how it reflects light. The Mayo Clinic's Double-Integrating Sphere Spectrophotometer (MDISS) is an automated measurement device that detects both scattered and direct e… ▽ More Data-driven science requires data to drive it. Being able to make accurate and precise measurement of biomaterials in the body means that medical assessments can be more accurate. There are differences between how blood absorbs and how it reflects light. The Mayo Clinic's Double-Integrating Sphere Spectrophotometer (MDISS) is an automated measurement device that detects both scattered and direct energy as it passes through a sample in a holder. It can make over 1,200 evenly spaced color measurements from the very deep purple (300-nm) through the visible light spectrum into the near infrared (2800-nm). The MDISS samples measured have been also measured by commercial laboratory equipment. The MDISS measurements are as accurate and more precise than those devices now in use. With so many measurements to be made during the time that the sample remains undegraded, mechanical and data collection automation was required. The MDISS sample holders include different thicknesses, versions that can operate at high pressure (such as divers may experience), and versions that can pump and rotate the measured material to maintain consistency of measurement. Although the data obtained are preliminary, they have potential to guide the design of new devices for more accurate assessments. There is an extensive "lessons learned" section. Please also see the companion report arXiv:2301.00938 △ Less

Submitted 4 January, 2023; v1 submitted 16 December, 2022; originally announced December 2022.

Comments: 31 pages, 20 figures authors 1, 2, 3, 5: Mayo Clinic, Special Purpose Processor Development Group, Rochester MN 55905 author 4: Mayo Clinic, Division of Laboratory Medicine and Pathology, Rochester MN 55905 This paper is released with its companion Mayo-SPPDG-R22-15-V01 arXiv:2301.00938

Report number: Report number: Mayo-SPPDG-R-22-16-R2

Elemental abundances in M31: Individual and Coadded Spectroscopic [Fe/H] and [α/Fe] throughout the M31 Halo with SPLASH

Authors: J. Leigh Wojno, Karoline M. Gilbert, Evan N. Kirby, Ivanna Escala, Puragra Guhathakurta, Rachael L. Beaton, Jason Kalirai, Masashi Chiba, Steven R. Majewski

Abstract: We present spectroscopic chemical abundances of red giant branch (RGB) stars in Andromeda (M31), using medium resolution ($R\sim6000$) spectra obtained via the Spectroscopic and Photometric Landscape of Andromeda's Stellar Halo (SPLASH) survey. In addition to individual chemical abundances, we coadd low signal-to-noise ratio (S/N) spectra of stars to obtain a high enough to measure average [Fe/H]… ▽ More We present spectroscopic chemical abundances of red giant branch (RGB) stars in Andromeda (M31), using medium resolution ($R\sim6000$) spectra obtained via the Spectroscopic and Photometric Landscape of Andromeda's Stellar Halo (SPLASH) survey. In addition to individual chemical abundances, we coadd low signal-to-noise ratio (S/N) spectra of stars to obtain a high enough to measure average [Fe/H] and [$α$/Fe] abundances. We obtain individual and coadded measurements for [Fe/H] and [$α$/Fe] for M31 halo stars, covering a range of 9--180 kpc in projected radius from the center of M31. With these measurements, we greatly increase the number of outer halo ($R_{\mathrm{proj}} > 50$ kpc) M31 stars with spectroscopic [Fe/H] and [$α$/Fe], adding abundance measurements for 45 individual stars and 33 coadds from a pool of an additional 174 stars. We measure the spectroscopic metallicity ([Fe/H]) gradient, finding a negative radial gradient of $-0.0050\pm0.0003$ for all stars in the halo, consistent with gradient measurements obtained using photometric metallicities. Using the first measurements of [$α$/Fe] for M31 halo stars covering a large range of projected radii, we find a positive gradient ($+0.0026\pm0.0004$) in [$α$/Fe] as a function of projected radius. We also explore the distribution in [Fe/H]--[$α$/Fe] space as a function of projected radius for both individual and coadded measurements in the smooth halo, and compare these measurements to those stars potentially associated with substructure. These spectroscopic abundance distributions highlight the substantial evidence that M31 has had an appreciably different formation and merger history compared to our own Galaxy. △ Less

Submitted 28 November, 2022; originally announced November 2022.

Comments: Submitted to ApJ

A Panchromatic Study of Massive Stars in the Extremely Metal-Poor Local Group Dwarf Galaxy Leo A

Authors: Maude Gull, Daniel R. Weisz, Peter Senchyna, Nathan R. Sandford, Yumi Choi, Anna F. McLeod, Kareem El-Badry, Ylva Götberg, Karoline M. Gilbert, Martha Boyer, Julianne J. Dalcanton, Puragra GuhaThakurta, Steven Goldman, Paola Marigo, Kristen B. W. McQuinn, Giada Pastorelli, Daniel P. Stark, Evan Skillman, Yuan-sen Ting, Benjamin F. Williams

Abstract: We characterize massive stars (M>8 M_sun) in the nearby (D~0.8 Mpc) extremely metal-poor (Z~5% Z_sun) galaxy Leo A using Hubble Space Telescope ultra-violet (UV), optical, and near-infrared (NIR) imaging along with Keck/LRIS and MMT/Binospec optical spectroscopy for 18 main sequence OB stars. We find that: (a) 12 of our 18 stars show emission lines, despite not being associated with an H II region… ▽ More We characterize massive stars (M>8 M_sun) in the nearby (D~0.8 Mpc) extremely metal-poor (Z~5% Z_sun) galaxy Leo A using Hubble Space Telescope ultra-violet (UV), optical, and near-infrared (NIR) imaging along with Keck/LRIS and MMT/Binospec optical spectroscopy for 18 main sequence OB stars. We find that: (a) 12 of our 18 stars show emission lines, despite not being associated with an H II region, suggestive of stellar activity (e.g., mass loss, accretion, binary star interaction), which is consistent with previous predictions of enhanced activity at low metallicity; (b) 6 are Be stars, which are the first to be spectroscopically studied at such low metallicity -- these Be stars have unusual panchromatic SEDs; (c) for stars well-fit by the TLUSTY non-local thermodynamic equilibrium (non-LTE) models, the photometric and spectroscopic values of T_eff and log(g) agree to within ~0.01 dex and ~0.18 dex, respectively, indicating that NUV/optical/NIR imaging can be used to reliably characterize massive (M ~ 8-30 M_sun) main sequence star properties relative to optical spectroscopy; (d) the properties of the most massive stars in H II regions are consistent with constraints from previous nebular emission line studies; and (e) 13 stars with M>8 M_sun are >40 pc from a known star cluster or H II region. Our sample comprises ~50% of all known massive stars at Z < 10% Z_sun with derived stellar parameters, high-quality optical spectra, and panchromatic photometry. △ Less

Submitted 28 December, 2022; v1 submitted 25 November, 2022; originally announced November 2022.

Comments: 35 pages, 18 figures

High-resolution single-shot spiral diffusion-weighted imaging at 7T using expanded encoding with compressed sensing

Authors: Gabriel Varela-Mattatall, Paul I. Dubovan, Tales Santini, Kyle M. Gilbert, Ravi S. Menon, Corey A. Baron

Abstract: Purpose: The expanded encoding model incorporates spatially- and time-varying field perturbations for correction during reconstruction. So far, these reconstructions have used the conjugate gradient method with early stopping used as implicit regularization. However, this approach is likely suboptimal for low-SNR cases like diffusion or high-resolution MRI. Here, we investigate the extent that l1-… ▽ More Purpose: The expanded encoding model incorporates spatially- and time-varying field perturbations for correction during reconstruction. So far, these reconstructions have used the conjugate gradient method with early stopping used as implicit regularization. However, this approach is likely suboptimal for low-SNR cases like diffusion or high-resolution MRI. Here, we investigate the extent that l1-wavelet regularization, or equivalently compressed sensing (CS), combined with expanded encoding improves trade-offs between spatial resolution, readout time and SNR for single-shot spiral diffusion-weighted imaging at 7T. The reconstructions were performed using our open-source GPU-enabled reconstruction toolbox, MatMRI, that allows inclusion of the different components of the expanded encoding model, with or without CS. Methods: In vivo accelerated single-shot spirals were acquired with five acceleration factors (2-6) and three in-plane spatial resolutions (1.5, 1.3, and 1.1 mm). From the in vivo reconstructions, we estimated diffusion tensors and computed fractional anisotropy maps. Then, simulations were used to quantitatively investigate and validate the impact of CS-based regularization on image quality when compared to a known ground truth. Results: In vivo reconstructions revealed improved image quality with retainment of small features when CS was used. Simulations showed that the joint use of the expanded encoding model and CS improves accuracy of image reconstructions (reduced mean-squared error) over the range of acceleration factors investigated. Conclusion: The expanded encoding model and CS regularization are complementary tools for single-shot spiral diffusion MRI, which enables both higher spatial resolutions and higher acceleration factors. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 23 pages, 10 figures, GVM and PD are co-first authors

A detailed star formation history for the extremely diffuse Andromeda XIX dwarf galaxy

Authors: Michelle L. M. Collins, Benjamin F. Williams, Erik J. Tollerud, Eduardo Balbinot, Karoline M. Gilbert, Andrew Dolphin

Abstract: We present deep imaging of the ultra-diffuse Andromeda XIX dwarf galaxy from the Advance Camera for Surveys on the Hubble Space Telescope which resolves its stellar populations to below the oldest main sequence turn-off. We derive a full star formation history for the galaxy using MATCH, and find no evidence of star formation in the past 8 Gyr. We calculate a quenching time of $τ_{90}=9.7\pm0.2$~G… ▽ More We present deep imaging of the ultra-diffuse Andromeda XIX dwarf galaxy from the Advance Camera for Surveys on the Hubble Space Telescope which resolves its stellar populations to below the oldest main sequence turn-off. We derive a full star formation history for the galaxy using MATCH, and find no evidence of star formation in the past 8 Gyr. We calculate a quenching time of $τ_{90}=9.7\pm0.2$~Gyr, suggesting Andromeda~XIX ceased forming stars very early on. This early quenching, combined with its extremely large half-light radius, low density dark matter halo and lower than expected metallicity make it a unique galaxy within the Local Group and raises questions about how it formed. The early quenching time allows us to rule out feedback from bursty star formation as a means to explain its diffuse stellar population and low density dark matter halo. We find that the extended stellar population, low density halo and star formation could be explained by either tidal interactions (such as tidal shocking) or by late dry mergers, with the latter also explaining its low metallicity. Proper motions and detailed abundances would allow us to distinguish between these two scenarios. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: 8 pages, 4 figures, accepted for publication in MNRAS, Published by Oxford University Press on behalf of the Royal Astronomical Society

Resolved SPLASH Chemodynamics in Andromeda's PHAT Stellar Halo and Disk: On the Nature of the Inner Halo Along the Major Axis

Authors: Ivanna Escala, Amanda C. N. Quirk, Puragra Guhathakurta, Karoline M. Gilbert, J. Leigh Wojno, Lara Cullinane, Benjamin F. Williams, Julianne Dalcanton

Abstract: Stellar kinematics and metallicity are key to exploring formation scenarios for galactic disks and halos. In this work, we characterized the relationship between kinematics and photometric metallicity along the line-of-sight to M31's disk. We combined optical HST/ACS photometry from the Panchromatic Hubble Andromeda Treasury (PHAT) survey with Keck/DEIMOS spectra from the Spectroscopic and Photome… ▽ More Stellar kinematics and metallicity are key to exploring formation scenarios for galactic disks and halos. In this work, we characterized the relationship between kinematics and photometric metallicity along the line-of-sight to M31's disk. We combined optical HST/ACS photometry from the Panchromatic Hubble Andromeda Treasury (PHAT) survey with Keck/DEIMOS spectra from the Spectroscopic and Photometric Landscape of Andromeda's Stellar Halo (SPLASH) survey. The resulting sample of 3512 individual red giant branch stars spans 4-19 projected kpc, making it a useful probe of both the disk and inner halo. We separated these stars into disk and halo populations by modeling the line-of-sight velocity distributions as a function of position across the disk region, where $\sim$73% stars have a high likelihood of belonging to the disk and $\sim$14% to the halo. Although stellar halos are typically thought to be metal-poor, the kinematically identified halo contains a significant population of stars ($\sim$29%) with disk-like metallicity ([Fe/H]$_{\rm phot}$ $\sim$ $-0.10$). This metal-rich halo population lags the gaseous disk to a similar extent as the rest of the halo, indicating that it does not correspond to a canonical thick disk. Its properties are inconsistent with those of tidal debris originating from the Giant Stellar Stream merger event. Moreover, the halo is chemically distinct from the phase-mixed component previously identified along the minor axis (i.e., away from the disk), implying contributions from different formation channels. These metal-rich halo stars provide direct chemodynamical evidence in favor of the previously suggested "kicked-up" disk population in M31's inner stellar halo. △ Less

Submitted 12 December, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Comments: Accepted by AJ. Conclusions on page 21. 19 figures, 2 tables, 5 appendices

The Panchromatic Hubble Andromeda Treasury: Triangulum Extended Region (PHATTER) II. The Spatially Resolved Recent Star Formation History of M33

Authors: Margaret Lazzarini, Benjamin F. Williams, Meredith J. Durbin, Julianne J. Dalcanton, Adam Smercina, Eric F. Bell, Yumi Choi, Andrew Dolphin, Karoline Gilbert, Puragra Guhathakurta, Erik Rosolowsky, Evan Skillman, O. Grace Telford, Daniel Weisz

Abstract: We measure the spatially resolved recent star formation history (SFH) of M33 using optical images taken with the Hubble Space Telescope as part of the Panchromatic Hubble Andromeda Treasury: Triangulum Extended Region (PHATTER) survey. The area covered by the observations used in this analysis covers a de-projected area of $\sim$38 kpc$^{2}$ and extends to $\sim$3.5 and $\sim$2 kpc from the center… ▽ More We measure the spatially resolved recent star formation history (SFH) of M33 using optical images taken with the Hubble Space Telescope as part of the Panchromatic Hubble Andromeda Treasury: Triangulum Extended Region (PHATTER) survey. The area covered by the observations used in this analysis covers a de-projected area of $\sim$38 kpc$^{2}$ and extends to $\sim$3.5 and $\sim$2 kpc from the center of M33 along the major and semi-major axes, respectively. We divide the PHATTER optical survey into 2005 regions that measure 24 arcsec, $\sim$100 pc, on a side and fit color magnitude diagrams for each region individually to measure the spatially resolved SFH of M33 within the PHATTER footprint. There are significant fluctuations in the SFH on small spatial scales and also galaxy-wide scales that we measure back to about 630 Myr ago. We observe a more flocculent spiral structure in stellar populations younger than about 80 Myr, while the structure of the older stellar populations is dominated by two spiral arms. We also observe a bar in the center of M33, which dominates at ages older than about 80 Myr. Finally, we find that the mean star formation rate (SFR) over the last 100 Myr within the PHATTER footprint is 0.32$\pm$0.02 M$_{\odot}$ yr$^{-1}$. We measure a current SFR (over the last 10 Myr) of 0.20$\pm$0.03 M$_{\odot}$ yr$^{-1}$. This SFR is slightly higher than previous measurements from broadband estimates, when scaled to account for the fraction of the D25 area covered by the PHATTER survey footprint. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: accepted for publication in ApJ, 37 pages, 18 figures, 6 tables

How to Assess Trustworthy AI in Practice

Authors: Roberto V. Zicari, Julia Amann, Frédérick Bruneault, Megan Coffee, Boris Düdder, Eleanore Hickman, Alessio Gallucci, Thomas Krendl Gilbert, Thilo Hagendorff, Irmhild van Halem, Elisabeth Hildt, Sune Holm, Georgios Kararigas, Pedro Kringen, Vince I. Madai, Emilie Wiinblad Mathez, Jesmin Jahan Tithi, Dennis Vetter, Magnus Westerlund, Renee Wurth

Abstract: This report is a methodological reflection on Z-Inspection$^{\small{\circledR}}$. Z-Inspection$^{\small{\circledR}}$ is a holistic process used to evaluate the trustworthiness of AI-based technologies at different stages of the AI lifecycle. It focuses, in particular, on the identification and discussion of ethical issues and tensions through the elaboration of socio-technical scenarios. It uses t… ▽ More This report is a methodological reflection on Z-Inspection$^{\small{\circledR}}$. Z-Inspection$^{\small{\circledR}}$ is a holistic process used to evaluate the trustworthiness of AI-based technologies at different stages of the AI lifecycle. It focuses, in particular, on the identification and discussion of ethical issues and tensions through the elaboration of socio-technical scenarios. It uses the general European Union's High-Level Expert Group's (EU HLEG) guidelines for trustworthy AI. This report illustrates for both AI researchers and AI practitioners how the EU HLEG guidelines for trustworthy AI can be applied in practice. We share the lessons learned from conducting a series of independent assessments to evaluate the trustworthiness of AI systems in healthcare. We also share key recommendations and practical suggestions on how to ensure a rigorous trustworthy AI assessment throughout the life-cycle of an AI system. △ Less

Submitted 28 June, 2022; v1 submitted 20 June, 2022; originally announced June 2022.

Comments: On behalf of the Z-Inspection$^{\small{\circledR}}$ initiative (2022)

The Hubble Space Telescope Survey of M31 Satellite Galaxies I. RR Lyrae-based Distances and Refined 3D Geometric Structure

Authors: Alessandro Savino, Daniel R. Weisz, Evan D. Skillman, Andrew Dolphin, Nitya Kallivayalil, Andrew Wetzel, Jay Anderson, Gurtina Besla, Michael Boylan-Kolchin, James S. Bullock, Andrew A. Cole, Michelle L. M. Collins, M. C. Cooper, Alis J. Deason, Aaron L. Dotter, Mark Fardal, Annette M. N. Ferguson, Tobias K. Fritz, Marla C. Geha, Karoline M. Gilbert, Puragra Guhathakurta, Rodrigo Ibata, Michael J. Irwin, Myoungwon Jeon, Evan Kirby , et al. (11 additional authors not shown)

Abstract: We measure homogeneous distances to M31 and 38 associated stellar systems ($-$16.8$\le M_V \le$ $-$6.0), using time-series observations of RR Lyrae stars taken as part of the Hubble Space Telescope Treasury Survey of M31 Satellites. From $>700$ orbits of new/archival ACS imaging, we identify $>4700$ RR Lyrae stars and determine their periods and mean magnitudes to a typical precision of 0.01 days… ▽ More We measure homogeneous distances to M31 and 38 associated stellar systems ($-$16.8$\le M_V \le$ $-$6.0), using time-series observations of RR Lyrae stars taken as part of the Hubble Space Telescope Treasury Survey of M31 Satellites. From $>700$ orbits of new/archival ACS imaging, we identify $>4700$ RR Lyrae stars and determine their periods and mean magnitudes to a typical precision of 0.01 days and 0.04 mag. Based on Period-Wesenheit-Metallicity relationships consistent with the Gaia eDR3 distance scale, we uniformly measure heliocentric and M31-centric distances to a typical precision of $\sim20$ kpc (3%) and $\sim10$ kpc (8%), respectively. We revise the 3D structure of the M31 galactic ecosystem and: (i) confirm a highly anisotropic spatial distribution such that $\sim80$% of M31's satellites reside on the near side of M31; this feature is not easily explained by observational effects; (ii) affirm the thin (rms $7-23$ kpc) planar "arc" of satellites that comprises roughly half (15) of the galaxies within 300 kpc from M31; (iii) reassess physical proximity of notable associations such as the NGC 147/185 pair and M33/AND XXII; and (iv) illustrate challenges in tip-of-the-red-giant branch distances for galaxies with $M_V > -9.5$, which can be biased by up to 35%. We emphasize the importance of RR Lyrae for accurate distances to faint galaxies that should be discovered by upcoming facilities (e.g., Rubin Observatory). We provide updated luminosities and sizes for our sample. Our distances will serve as the basis for future investigation of the star formation and orbital histories of the entire known M31 satellite system. △ Less

Submitted 12 September, 2022; v1 submitted 6 June, 2022; originally announced June 2022.

Comments: 32 pages, 15 figures, accepted for publication on ApJ

Sociotechnical Specification for the Broader Impacts of Autonomous Vehicles

Authors: Thomas Krendl Gilbert, Aaron J. Snoswell, Michael Dennis, Rowan McAllister, Cathy Wu

Abstract: Autonomous Vehicles (AVs) will have a transformative impact on society. Beyond the local safety and efficiency of individual vehicles, these effects will also change how people interact with the entire transportation system. This will generate a diverse range of large and foreseeable effects on social outcomes, as well as how those outcomes are distributed. However, the ability to control both the… ▽ More Autonomous Vehicles (AVs) will have a transformative impact on society. Beyond the local safety and efficiency of individual vehicles, these effects will also change how people interact with the entire transportation system. This will generate a diverse range of large and foreseeable effects on social outcomes, as well as how those outcomes are distributed. However, the ability to control both the individual behavior of AVs and the overall flow of traffic also provides new affordances that permit AVs to control these effects. This comprises a problem of sociotechnical specification: the need to distinguish which essential features of the transportation system are in or out of scope for AV development. We present this problem space in terms of technical, sociotechnical, and social problems, and illustrate examples of each for the transport system components of social mobility, public infrastructure, and environmental impacts. The resulting research methodology sketches a path for developers to incorporate and evaluate more transportation system features within AV system components over time. △ Less

Submitted 15 May, 2022; originally announced May 2022.

Comments: Paper accepted for presentation at ICRA 2022 workshop "Fresh Perspectives on the Future of Autonomous Driving"

Reward Reports for Reinforcement Learning

Authors: Thomas Krendl Gilbert, Nathan Lambert, Sarah Dean, Tom Zick, Aaron Snoswell

Abstract: Building systems that are good for society in the face of complex societal effects requires a dynamic approach. Recent approaches to machine learning (ML) documentation have demonstrated the promise of discursive frameworks for deliberation about these complexities. However, these developments have been grounded in a static ML paradigm, leaving the role of feedback and post-deployment performance… ▽ More Building systems that are good for society in the face of complex societal effects requires a dynamic approach. Recent approaches to machine learning (ML) documentation have demonstrated the promise of discursive frameworks for deliberation about these complexities. However, these developments have been grounded in a static ML paradigm, leaving the role of feedback and post-deployment performance unexamined. Meanwhile, recent work in reinforcement learning has shown that the effects of feedback and optimization objectives on system behavior can be wide-ranging and unpredictable. In this paper we sketch a framework for documenting deployed and iteratively updated learning systems, which we call Reward Reports. Taking inspiration from various contributions to the technical literature on reinforcement learning, we outline Reward Reports as living documents that track updates to design choices and assumptions behind what a particular automated system is optimizing for. They are intended to track dynamic phenomena arising from system deployment, rather than merely static properties of models or data. After presenting the elements of a Reward Report, we discuss a concrete example: Meta's BlenderBot 3 chatbot. Several others for game-playing (DeepMind's MuZero), content recommendation (MovieLens), and traffic control (Project Flow) are included in the appendix. △ Less

Submitted 19 March, 2023; v1 submitted 22 April, 2022; originally announced April 2022.

Kinematics and Metallicity of Red Giant Branch Stars in the Northeast Shelf of M31

Authors: Ivanna Escala, Karoline M. Gilbert, Mark Fardal, Puragra Guhathakurta, Robyn E. Sanderson, Jason S. Kalirai, Bahram Mobasher

Abstract: We obtained Keck/DEIMOS spectra of 556 individual red giant branch stars in 4 spectroscopic fields spanning $13-31$ projected kpc along the Northeast (NE) shelf of M31. We present the first detection of a complete wedge pattern in the space of projected M31-centric radial distance versus line-of-sight velocity for this feature, which includes the returning stream component of the shelf. This wedge… ▽ More We obtained Keck/DEIMOS spectra of 556 individual red giant branch stars in 4 spectroscopic fields spanning $13-31$ projected kpc along the Northeast (NE) shelf of M31. We present the first detection of a complete wedge pattern in the space of projected M31-centric radial distance versus line-of-sight velocity for this feature, which includes the returning stream component of the shelf. This wedge pattern agrees with expectations of a tidal shell formed in a radial merger and provides strong evidence in favor of predictions of Giant Stellar Stream (GSS) formation models in which the NE shelf originates from the second orbital wrap of the tidal debris. The observed concentric wedge patterns of the NE, West (W), and Southeast (SE) shelves corroborate this interpretation independently of the models. We do not detect a kinematical signature in the NE shelf region corresponding to an intact progenitor core, favoring GSS formation models in which the progenitor is completely disrupted. The shelf's photometric metallicity distribution implies that it is dominated by tidal material, as opposed to the phase-mixed stellar halo or the disk. The metallicity distribution ([Fe/H]$_{\rm phot}$ = $-0.42$ $\pm$ $0.01$) also matches the GSS, and consequently the W and SE shelves, further supporting a direct physical association between the tidal features. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: 21 pages main text, 15 figures, 5 tables (including Appendix). Submitted to AJ

Choices, Risks, and Reward Reports: Charting Public Policy for Reinforcement Learning Systems

Authors: Thomas Krendl Gilbert, Sarah Dean, Tom Zick, Nathan Lambert

Abstract: In the long term, reinforcement learning (RL) is considered by many AI theorists to be the most promising path to artificial general intelligence. This places RL practitioners in a position to design systems that have never existed before and lack prior documentation in law and policy. Public agencies could intervene on complex dynamics that were previously too opaque to deliberate about, and long… ▽ More In the long term, reinforcement learning (RL) is considered by many AI theorists to be the most promising path to artificial general intelligence. This places RL practitioners in a position to design systems that have never existed before and lack prior documentation in law and policy. Public agencies could intervene on complex dynamics that were previously too opaque to deliberate about, and long-held policy ambitions would finally be made tractable. In this whitepaper we illustrate this potential and how it might be technically enacted in the domains of energy infrastructure, social media recommender systems, and transportation. Alongside these unprecedented interventions come new forms of risk that exacerbate the harms already generated by standard machine learning tools. We correspondingly present a new typology of risks arising from RL design choices, falling under four categories: scoping the horizon, defining rewards, pruning information, and training multiple agents. Rather than allowing RL systems to unilaterally reshape human domains, policymakers need new mechanisms for the rule of reason, foreseeability, and interoperability that match the risks these systems pose. We argue that criteria for these choices may be drawn from emerging subfields within antitrust, tort, and administrative law. It will then be possible for courts, federal and state agencies, and non-governmental organizations to play more active roles in RL specification and evaluation. Building on the "model cards" and "datasheets" frameworks proposed by Mitchell et al. and Gebru et al., we argue the need for Reward Reports for AI systems. Reward Reports are living documents for proposed RL deployments that demarcate design choices. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Comments: 60 pages

Journal ref: Center for Long Term Cybersecurity Whitepaper Series Feb. 2022; see release https://cltc.berkeley.edu/2022/02/08/reward-reports/

The Triangulum Extended (TREX) Survey: The Stellar Disk Dynamics of M33 as a Function of Stellar Age

Authors: A. C. N. Quirk, P. Guhathakurta, K. Gilbert, L. Chemin, J. Dalcanton, B. Williams, A. Seth, E. Patel, J. Fung, P. Tangirala, I. Yusufali

Abstract: Triangulum, M33, is a low mass, relatively undisturbed spiral galaxy that offers a new regime in which to test models of dynamical heating. In spite of its proximity, the dynamical heating history of M33 has not yet been well constrained. In this work, we present the TREX Survey, the largest stellar spectroscopic survey across the disk of M33. We present the stellar disk kinematics as a function o… ▽ More Triangulum, M33, is a low mass, relatively undisturbed spiral galaxy that offers a new regime in which to test models of dynamical heating. In spite of its proximity, the dynamical heating history of M33 has not yet been well constrained. In this work, we present the TREX Survey, the largest stellar spectroscopic survey across the disk of M33. We present the stellar disk kinematics as a function of age to study the past and ongoing dynamical heating of M33. We measure line of sight velocities for ~4,500 disk stars. Using a subset, we divide the stars into broad age bins using Hubble Space Telescope and Canada-France-Hawaii-Telescope photometric catalogs: massive main sequence stars and helium burning stars (~80 Myr), intermediate mass asymptotic branch stars (~1 Gyr), and low mass red giant branch stars (~4 Gyr). We compare the stellar disk dynamics to that of the gas using existing HI, CO, and Halpha kinematics. We find that the disk of M33 has relatively low velocity dispersion (~16 km/s), and unlike in the Milky Way and Andromeda galaxies, there is no strong trend in velocity dispersion as a function of stellar age. The youngest disk stars are as dynamically hot as the oldest disk stars and are dynamically hotter than predicted by most M33 like low mass simulated analogs in Illustris. The velocity dispersion of the young stars is highly structured, with the large velocity dispersion fairly localized. The cause of this high velocity dispersion is not evident from the observations and simulated analogs presented here. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 27 pages, 15 figures, 6 tables

The TREX Survey: Kinematical Complexity Throughout M33's Stellar Disk and Evidence for a Stellar Halo

Authors: Karoline M. Gilbert, Amanda C. N. Quirk, Puragra Guhathakurta, Erik Tollerud, Jennifer Wojno, Julianne J. Dalcanton, Meredith J. Durbin, Anil Seth, Benjamin F. Williams, Justin T. Fung, Pujita Tangirala, Ibrahim Yusufali

Abstract: We present initial results from a large spectroscopic survey of stars throughout M33's stellar disk. We analyze a sample of 1667 red giant branch (RGB) stars extending to projected distances of $\sim 11$ kpc from M33's center ($\sim 18$ kpc, or $\sim 10$ scale lengths, in the plane of the disk). The line-of-sight velocities of RGB stars show the presence of two kinematical components. One componen… ▽ More We present initial results from a large spectroscopic survey of stars throughout M33's stellar disk. We analyze a sample of 1667 red giant branch (RGB) stars extending to projected distances of $\sim 11$ kpc from M33's center ($\sim 18$ kpc, or $\sim 10$ scale lengths, in the plane of the disk). The line-of-sight velocities of RGB stars show the presence of two kinematical components. One component is consistent with rotation in the plane of M33's HI disk and has a velocity dispersion ($\sim 19$ km s$^{-1}$) consistent with that observed in a comparison sample of younger stars, while the second component has a significantly higher velocity dispersion. A two-component fit to the RGB velocity distribution finds that the high dispersion component has a velocity dispersion of $59.3^{+2.6}_{-2.5}$ km s$^{-1}$ and rotates very slowly in the plane of the disk (consistent with no rotation at the $<1.5σ$ level), which favors interpreting it as a stellar halo rather than a thick disk population. A spatial analysis indicates that the fraction of RGB stars in the high-velocity-dispersion component decreases with increasing radius over the range covered by the spectroscopic sample. Our spectroscopic sample establishes that a significant high-velocity-dispersion component is present in M33's RGB population from near M33's center to at least the radius where M33's HI disk begins to warp at 30$'$ ($\sim 7.5$ kpc) in the plane of the disk. This is the first detection and spatial characterization of a kinematically hot stellar component throughout M33's inner regions. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: 33 pages, 19 figures. Accepted for publication in ApJ