Showing 51–80 of 80 results for author: Galitzki, N

Submillimeter Polarization Spectrum of the Carina Nebula

Authors: Jamil A. Shariff, Peter A. R. Ade, Francesco E. Angilè, Peter Ashton, Steven J. Benton, Mark J. Devlin, Bradley Dober, Laura M. Fissel, Yasuo Fukui, Nicholas Galitzki, Natalie N. Gandilo, Jeffrey Klein, Andrei L. Korotkov, Zhi-Yun Li, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura, Calvin B. Netterfield, Giles Novak, Enzo Pascale, Frédérick Poidevin, Fabio P. Santos, Giorgio Savini, Douglas Scott , et al. (5 additional authors not shown)

Abstract: Linear polarization maps of the Carina Nebula were obtained at 250, 350, and 500 $μ$m during the 2012 flight of the BLASTPol balloon-borne telescope. These measurements are combined with Planck 850 $μ$m data in order to produce a submillimeter spectrum of the polarization fraction of the dust emission, averaged over the cloud. This spectrum is flat to within $\pm$15% (relative to the 350 $μ$m pola… ▽ More Linear polarization maps of the Carina Nebula were obtained at 250, 350, and 500 $μ$m during the 2012 flight of the BLASTPol balloon-borne telescope. These measurements are combined with Planck 850 $μ$m data in order to produce a submillimeter spectrum of the polarization fraction of the dust emission, averaged over the cloud. This spectrum is flat to within $\pm$15% (relative to the 350 $μ$m polarization fraction). In particular, there is no evidence for a pronounced minimum of the spectrum near 350 $μ$m, as suggested by previous ground-based measurements of other molecular clouds. This result of a flat polarization spectrum in Carina is consistent with recently-published BLASTPol measurements of the Vela C molecular cloud, and also agrees with a published model for an externally-illuminated, dense molecular cloud by Bethell and collaborators. The shape of the spectrum in Carina does not show any dependence on the radiative environment of the dust, as quantified by the Planck-derived dust temperature or dust optical depth at 353 GHz. △ Less

Submitted 17 September, 2018; originally announced September 2018.

Comments: 13 pages, 12 figures, submitted to ApJ

Design and characterization of a ground-based absolute polarization calibrator for use with polarization sensitive CMB experiments

Authors: M. F. Navaroli, G. P. Teply, K. D. Crowley, J. P. Kaufman, N. B. Galitzki, K. S. Arnold, B. G. Keating

Abstract: We present the design and characterization of a ground-based absolute polarization angle calibrator accurate to better than 0.1 degrees for use with polarization sensitive cosmic microwave background (CMB) experiments. The calibrator's accuracy requirement is driven by the need to reduce upper limits on cosmic polarization rotation, which is expected to be zero in a large class of cosmological mod… ▽ More We present the design and characterization of a ground-based absolute polarization angle calibrator accurate to better than 0.1 degrees for use with polarization sensitive cosmic microwave background (CMB) experiments. The calibrator's accuracy requirement is driven by the need to reduce upper limits on cosmic polarization rotation, which is expected to be zero in a large class of cosmological models. Cosmic polarization effects such as cosmic birefringence and primordial magnetic fields can generate spurious B-modes that result in non-zero CMB TB and EB correlations that are degenerate with a misalignment of detector orientation. Common polarized astrophysical sources used for absolute polarization angle calibration have not been characterized to better than 0.5 degrees. Higher accuracy can be achieved through self-calibration methods, however these are subject to astrophysical foreground contamination and inherently assume the absence of effects like cosmic polarization rotation. The deficiencies in these two calibration methods highlight the need for a well characterized polarized source. The calibrator we present utilizes a 76 GHz Gunn oscillator coupled to a frequency doubler, pyramidal horn antenna, and co-rotating wire-grid polarizer. We use an accurate bubble level in combination with four precision-grade aluminum planes located within the enclosure to calibrate the source's linear polarization plane with respect to the local gravity vector to better than the 0.1 degree goal. In 2017 the calibrator was deployed for an engineering test run on the POLARBEAR CMB experiment located in Chile's Atacama Desert and is being upgraded for calibration of the POLARBEAR-2b receiver in 2018. In the following work we present a detailed overview of the calibrator design, systematic control, characterization, deployment, and plans for future CMB experiment absolute polarization calibration. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Comments: 15 pages, 7 figures, 2 tables, SPIE conference Austin 2018

Journal ref: Proceedings Volume 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX; 107082A (2018)

Simons Observatory Large Aperture Telescope Receiver Design Overview

Authors: Ningfeng Zhu, John L. Orlowski-Scherer, Zhilei Xu, Aamir Ali, Kam S. Arnold, Peter C. Ashton, Gabriele Coppi, Mark J. Devlin, Simon Dicker, Nicholas Galitzki, Patricio A. Gallardo, Shawn W. Henderson, Shuay-Pwu Patty Ho, Johannes Hubmayr, Brian Keating, Adrian T. Lee, Michele Limon, Marius Lungu, Philip D. Mauskopf, Andrew J. May, Jeff McMahon, Michael D. Niemack, Lucio Piccirillo, Giuseppe Puglisi, Mayuri Sathyanarayana Rao , et al. (9 additional authors not shown)

Abstract: The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees and sample frequencies between 27 and 270 GHz. Here we present the current design of the large aperture telescope receiver (LATR), a 2.4 m diameter cryostat that will… ▽ More The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees and sample frequencies between 27 and 270 GHz. Here we present the current design of the large aperture telescope receiver (LATR), a 2.4 m diameter cryostat that will be mounted on the SO 6 m telescope and will be the largest CMB receiver to date. The cryostat size was chosen to take advantage of the large focal plane area having high Strehl ratios, which is inherent to the Cross-Dragone telescope design. The LATR will be able to accommodate thirteen optics tubes, each having a 36 cm diameter aperture and illuminating several thousand transition-edge sensor (TES) bolometers. This set of equipment will provide an opportunity to make measurements with unparalleled sensitivity. However, the size and complexity of the LATR also pose numerous technical challenges. In the following paper, we present the design of the LATR and include how we address these challenges. The solutions we develop in the process of designing the LATR will be informative for the general CMB community, and for future CMB experiments like CMB-S4. △ Less

Submitted 29 August, 2018; originally announced August 2018.

Design and Characterization of a Balloon-Borne Diffraction-Limited Submillimeter Telescope Platform for BLAST-TNG

Authors: Nathan P. Lourie, Francisco E. Angile, Peter C. Ashton, Brian Catanzaro, Mark J. Devlin, Simon Dicker, Joy Didier, Bradley Dober, Laura M. Fissel, Nicholas Galitzki, Samuel Gordon, Jeffrey Klein, Ian Lowe, Philip Mauskopf, Federico Nati, Giles Novak, L. Javier Romualdez, Juan D. Soler, Paul A. Williams

Abstract: The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first pol… ▽ More The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first polarimeter with the sensitivity and resolution to probe the $\sim$0.1 parsec-scale features that are critical to understanding the origin of structures in the interstellar medium. With three detector arrays operating at 250, 350, and 500 $μ$m (1200, 857, and 600 GHz), BLAST-TNG will obtain diffraction-limited resolution at each waveband of 30, 41, and 59 arcseconds respectively. To achieve the submillimeter resolution necessary for its science goals, the BLAST-TNG telescope features a 2.5 m aperture carbon fiber composite primary mirror, one of the largest mirrors flown on a balloon platform. Successful performance of such a large telescope on a balloon-borne platform requires stiff, lightweight optical components and mounting structures. Through a combination of optical metrology and finite element modeling of thermal and mechanical stresses on both the telescope optics and mounting structures, we expect diffraction-limited resolution at all our wavebands. We expect pointing errors due to deformation of the telescope mount to be negligible. We have developed a detailed thermal model of the sun shielding, gondola, and optical components to optimize our observing strategy and increase the stability of the telescope over the flight. We present preflight characterization of the telescope and its platform. △ Less

Submitted 26 August, 2018; originally announced August 2018.

Comments: 19 pages, 11 figures, 2018 SPIE Astronomical Telescopes & Instrumentation Conference

Journal ref: SPIE Proceedings Volume 10700, Ground-based and Airborne Telescopes VII; 1070022 (2018)

Preflight Characterization of the BLAST-TNG Receiver and Detector Arrays

Authors: Nathan P. Lourie, Peter A. R. Ade, Francisco E. Angile, Peter C. Ashton, Jason E. Austermann, Mark J. Devlin, Bradley Dober, Nicholas Galitzki, Jiansong Gao, Sam Gordon, Christopher E. Groppi, Jeffrey Klein, Gene C. Hilton, Johannes Hubmayr, Dale Li, Ian Lowe, Hamdi Mani, Philip Mauskopf, Christopher M. McKenney, Federico Nati, Giles Novak, Enzo Pascale, Giampaolo Pisano, Adrian Sinclair, Juan D. Soler , et al. (4 additional authors not shown)

Abstract: The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first pol… ▽ More The Next Generation Balloon-borne Large Aperture Submillimeter Telescope (BLAST-TNG) is a submillimeter mapping experiment planned for a 28 day long-duration balloon (LDB) flight from McMurdo Station, Antarctica during the 2018-2019 season. BLAST-TNG will detect submillimeter polarized interstellar dust emission, tracing magnetic fields in galactic molecular clouds. BLAST-TNG will be the first polarimeter with the sensitivity and resolution to probe the $\sim$0.1 parsec-scale features that are critical to understanding the origin of structures in the interstellar medium. BLAST-TNG features three detector arrays operating at wavelengths of 250, 350, and 500 $μ$m (1200, 857, and 600 GHz) comprised of 918, 469, and 272 dual-polarization pixels, respectively. Each pixel is made up of two crossed microwave kinetic inductance detectors (MKIDs). These arrays are cooled to 275 mK in a cryogenic receiver. Each MKID has a different resonant frequency, allowing hundreds of resonators to be read out on a single transmission line. This inherent ability to be frequency-domain multiplexed simplifies the cryogenic readout hardware, but requires careful optical testing to map out the physical location of each resonator on the focal plane. Receiver-level optical testing was carried out using both a cryogenic source mounted to a movable xy-stage with a shutter, and a beam-filling, heated blackbody source able to provide a 10-50 $^\circ$C temperature chop. The focal plane array noise properties, responsivity, polarization efficiency, instrumental polarization were measured. We present the preflight characterization of the BLAST-TNG cryogenic system and array-level optical testing of the MKID detector arrays in the flight receiver. △ Less

Submitted 25 August, 2018; originally announced August 2018.

Comments: 15 pages, 7 figures, SPIE Astronomical Telescopes and Instrumentation Conference

Journal ref: Proceedings Volume 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX; 107080L (2018)

Cooldown Strategies and Transient Thermal Simulations for the Simons Observatory

Authors: Gabriele Coppi, Zhilei Xu, Aamir Ali, Mark J. Devlin, Simon Dicker, Nicholas Galitzki, Patricio A. Gallardo, Brian Keating, Michele Limon, Marius Longu, Andrew J. May, Jeff McMahon, Michael D. Niemack, Jack L. Orlowski-Scherer, Lucio Piccirillo, Giuseppe Puglisi, Maria Salatino, Sara M. Simon, Grant Teply, Robert Thornton, Eve M. Vavagiakis, Ningfeng Zhu

Abstract: The Simons Observatory (SO) will provide precision polarimetry of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales from arc-minutes to tens of degrees, contain over 60,000 detectors, and observe in frequency bands between 27 GHz and 270 GHz. SO will consist of a six-meter-aperture telescope initially coupled to ~35,000 detectors along with an array… ▽ More The Simons Observatory (SO) will provide precision polarimetry of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales from arc-minutes to tens of degrees, contain over 60,000 detectors, and observe in frequency bands between 27 GHz and 270 GHz. SO will consist of a six-meter-aperture telescope initially coupled to ~35,000 detectors along with an array of 0.5m aperture refractive cameras, coupled to an additional 30,000+ detectors. The large aperture telescope receiver (LATR) is coupled to a six-meter crossed Dragone telescope and will be 2.4m in diameter, weigh over 3 tons, and have five cryogenic stages (80 K, 40 K, 4 K, 1 K and 100 mK). The LATR is coupled to the telescope via 13 independent optics tubes containing cryogenic optical elements and detectors. The cryostat will be cooled by by two Cryomech PT90 (80 K) and three Cryomech PT420 (40 K and 4 K) pulse tube cryocoolers, with cooling of the 1 K and 100 mK stages by a commercial dilution refrigerator system. The second component, the small aperture telescope (SAT), is a single optics tube refractive cameras of 42cm diameter. Cooling of the SAT stages will be provided by two Cryomech PT420, one of which is dedicated to the dilution refrigeration system which will cool the focal plane to 100 mK. SO will deploy a total of three SATs. In order to estimate the cool down time of the camera systems given their size and complexity, a finite difference code based on an implicit solver has been written to simulate the transient thermal behavior of both cryostats. The result from the simulations presented here predict a 35 day cool down for the LATR. The simulations suggest additional heat switches between stages would be effective in distribution cool down power and reducing the time it takes for the LATR to cool. The SAT is predicted to cool down in one week, which meets the SO design goals. △ Less

Submitted 23 August, 2018; originally announced August 2018.

Journal ref: Proc.SPIE, vol. 10708, pag. 10708 - 10708 - 13, year 2018

The Simons Observatory: Science goals and forecasts

Authors: The Simons Observatory Collaboration, Peter Ade, James Aguirre, Zeeshan Ahmed, Simone Aiola, Aamir Ali, David Alonso, Marcelo A. Alvarez, Kam Arnold, Peter Ashton, Jason Austermann, Humna Awan, Carlo Baccigalupi, Taylor Baildon, Darcy Barron, Nick Battaglia, Richard Battye, Eric Baxter, Andrew Bazarko, James A. Beall, Rachel Bean, Dominic Beck, Shawn Beckman, Benjamin Beringue, Federico Bianchini , et al. (225 additional authors not shown)

Abstract: The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225… ▽ More The Simons Observatory (SO) is a new cosmic microwave background experiment being built on Cerro Toco in Chile, due to begin observations in the early 2020s. We describe the scientific goals of the experiment, motivate the design, and forecast its performance. SO will measure the temperature and polarization anisotropy of the cosmic microwave background in six frequency bands: 27, 39, 93, 145, 225 and 280 GHz. The initial configuration of SO will have three small-aperture 0.5-m telescopes (SATs) and one large-aperture 6-m telescope (LAT), with a total of 60,000 cryogenic bolometers. Our key science goals are to characterize the primordial perturbations, measure the number of relativistic species and the mass of neutrinos, test for deviations from a cosmological constant, improve our understanding of galaxy evolution, and constrain the duration of reionization. The SATs will target the largest angular scales observable from Chile, mapping ~10% of the sky to a white noise level of 2 $μ$K-arcmin in combined 93 and 145 GHz bands, to measure the primordial tensor-to-scalar ratio, $r$, at a target level of $σ(r)=0.003$. The LAT will map ~40% of the sky at arcminute angular resolution to an expected white noise level of 6 $μ$K-arcmin in combined 93 and 145 GHz bands, overlapping with the majority of the LSST sky region and partially with DESI. With up to an order of magnitude lower polarization noise than maps from the Planck satellite, the high-resolution sky maps will constrain cosmological parameters derived from the damping tail, gravitational lensing of the microwave background, the primordial bispectrum, and the thermal and kinematic Sunyaev-Zel'dovich effects, and will aid in delensing the large-angle polarization signal to measure the tensor-to-scalar ratio. The survey will also provide a legacy catalog of 16,000 galaxy clusters and more than 20,000 extragalactic sources. △ Less

Submitted 1 March, 2019; v1 submitted 22 August, 2018; originally announced August 2018.

Comments: This paper presents an overview of the Simons Observatory science goals, details about the instrument will be presented in a companion paper. The author contribution to this paper is available at https://simonsobservatory.org/publications.php (Abstract abridged) -- matching version published in JCAP

Journal ref: JCAP 1902 (2019) 056

Studies of Systematic Uncertainties for Simons Observatory: Polarization Modulator Related Effects

Authors: Maria Salatino, Jacob Lashner, Martina Gerbino, Sara M. Simon, Joy Didier, Aamir Ali, Peter C. Ashton, Sean Bryan, Yuji Chinone, Kevin Coughlin, Kevin T. Crowley, Giulio Fabbian, Nicholas Galitzki, Neil Goeckner-Wald, Joseph E. Golec, Jon E. Gudmundsson, Charles A. Hill, Brian Keating, Akito Kusaka, Adrian T. Lee, Jeffrey McMahon, Amber D. Miller, Giuseppe Puglisi, Christian L. Reichardt, Grant Teply , et al. (2 additional authors not shown)

Abstract: The Simons Observatory (SO) will observe the temperature and polarization anisotropies of the cosmic microwave background (CMB) over a wide range of frequencies (27 to 270 GHz) and angular scales by using both small (0.5 m) and large (6 m) aperture telescopes. The SO small aperture telescopes will target degree angular scales where the primordial B-mode polarization signal is expected to peak. The… ▽ More The Simons Observatory (SO) will observe the temperature and polarization anisotropies of the cosmic microwave background (CMB) over a wide range of frequencies (27 to 270 GHz) and angular scales by using both small (0.5 m) and large (6 m) aperture telescopes. The SO small aperture telescopes will target degree angular scales where the primordial B-mode polarization signal is expected to peak. The incoming polarization signal of the small aperture telescopes will be modulated by a cryogenic, continuously-rotating half-wave plate (CRHWP) to mitigate systematic effects arising from slowly varying noise and detector pair-differencing. In this paper, we present an assessment of some systematic effects arising from using a CRHWP in the SO small aperture systems. We focus on systematic effects associated with structural properties of the HWP and effects arising when operating a HWP, including the amplitude of the HWP synchronous signal (HWPSS), and I -> P (intensity to polarization) leakage that arises from detector non-linearity in the presence of a large HWPSS. We demonstrate our ability to simulate the impact of the aforementioned systematic effects in the time domain. This important step will inform mitigation strategies and design decisions to ensure that SO will meet its science goals. △ Less

Submitted 22 August, 2018; originally announced August 2018.

Comments: 22 pages, 10 figures. Submitted to the Proceedings of SPIE: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX

Simons Observatory large aperture receiver simulation overview

Authors: John L. Orlowski-Scherer, Ningfeng Zhu, Zhilei Xu, Aamir Ali, Kam S. Arnold, Peter C. Ashton, Gabriele Coppi, Mark Devlin, Simon Dicker, Nicholas Galitzki, Patricio A. Gallardo, Brian Keating, Adrian T. Lee, Michele Limon, Marius Lungu, Andrew May, Jeff McMahon, Michael D. Niemack, Lucio Piccirillo, Giuseppe Puglisi, Maria Salatino, Max Silva-Feaver, Sara M. Simon, Robert Thornton, Eve M. Vavagiakis

Abstract: The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees, contain over 60,000 detectors, and sample frequencies between 27 and 270 GHz. SO will consist of a six-meter-aperture telescope coupled to over 30,000 detectors alon… ▽ More The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic microwave background (CMB) using a series of telescopes which will cover angular scales between one arcminute and tens of degrees, contain over 60,000 detectors, and sample frequencies between 27 and 270 GHz. SO will consist of a six-meter-aperture telescope coupled to over 30,000 detectors along with an array of half-meter aperture refractive cameras, which together couple to an additional 30,000+ detectors. SO will measure fundamental cosmological parameters of our universe, find high redshift clusters via the Sunyaev-Zeldovich effect, constrain properties of neutrinos, and seek signatures of dark matter through gravitational lensing. In this paper we will present results of the simulations of the SO large aperture telescope receiver (LATR). We will show details of simulations performed to ensure the structural integrity and thermal performance of our receiver, as well as will present the results of finite element analyses (FEA) of designs for the structural support system. Additionally, a full thermal model for the LATR will be described. The model will be used to ensure we meet our design requirements. Finally, we will present the results of FEA used to identify the primary vibrational modes, and planned methods for suppressing these modes. Design solutions to each of these problems that have been informed by simulation will be presented. △ Less

Submitted 20 August, 2018; originally announced August 2018.

Comments: 14 pages, 10 figures, Proceedings of SPIE

Journal ref: Proceedings of SPIE, Volume 10708, 2018, pages 10708 - 10708 - 132

Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations

Authors: Patricio A. Gallardo, Jon Gudmundsson, Brian J. Koopman, Frederick T. Matsuda, Sara M. Simon, Aamir Ali, Sean Bryan, Yuji Chinone, Gabriele Coppi, Nicholas Cothard, Mark J. Devlin, Simon Dicker, Giulio Fabbian, Nicholas Galitzki, Charles A. Hill, Brian Keating, Akito Kusaka, Jacob Lashner, Adrian T. Lee, Michele Limon, Philip D. Mauskopf, Jeff McMahon, Federico Nati, Michael D. Niemack, John L. Orlowski-Scherer , et al. (10 additional authors not shown)

Abstract: The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i… ▽ More The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup. △ Less

Submitted 15 August, 2018; originally announced August 2018.

Comments: Poster presented at SPIE Astronomical Telescopes and Instrumentation 2018

Cold optical design for the Large Aperture Simons Observatory telescope

Authors: S. R. Dicker, P. A. Gallardo, J. E Gudmundsson, P. D. Mauskopf, A. Ali, P. C. Ashton, G. Coppi, M. J. Devlin, N. Galitzki, S. P. Ho, C. A. Hill, J. Hubmayr, B. Keating, A. T. Lee, M. Limon, F. Matsuda, J. McMahon, M. D. Niemack, J. L. Orlowski-Scherer, L. Piccirillo, M. Salatino, S. M. Simon, S. T. Staggs, R. Thornton, J. N. Ullom , et al. (4 additional authors not shown)

Abstract: The Simons Observatory will consist of a single large (6 m diameter) telescope and a number of smaller (0.5 m diameter) refracting telescopes designed to measure the polarization of the Cosmic Microwave Background to unprecedented accuracy. The large aperture telescope is the same design as the CCAT-prime telescope, a modified Crossed Dragone design with a field-of-view of over 7.8 degrees diamete… ▽ More The Simons Observatory will consist of a single large (6 m diameter) telescope and a number of smaller (0.5 m diameter) refracting telescopes designed to measure the polarization of the Cosmic Microwave Background to unprecedented accuracy. The large aperture telescope is the same design as the CCAT-prime telescope, a modified Crossed Dragone design with a field-of-view of over 7.8 degrees diameter at 90 GHz. This paper presents an overview of the cold reimaging optics for this telescope and what drove our choice of 350-400 mm diameter silicon lenses in a 2.4 m cryostat over other possibilities. We will also consider the future expandability of this design to CMB Stage-4 and beyond. △ Less

Submitted 13 December, 2019; v1 submitted 15 August, 2018; originally announced August 2018.

The Simons Observatory: Instrument Overview

Authors: Nicholas Galitzki, Aamir Ali, Kam S. Arnold, Peter C. Ashton, Jason E. Austermann, Carlo Baccigalupi, Taylor Baildon, Darcy Barron, James A. Beall, Shawn Beckman, Sarah Marie M. Bruno, Sean Bryan, Paolo G. Calisse, Grace E. Chesmore, Yuji Chinone, Steve K. Choi, Gabriele Coppi, Kevin D. Crowley, Kevin T. Crowley, Ari Cukierman, Mark J. Devlin, Simon Dicker, Bradley Dober, Shannon M. Duff, Jo Dunkley , et al. (53 additional authors not shown)

Abstract: The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor… ▽ More The Simons Observatory (SO) will make precise temperature and polarization measurements of the cosmic microwave background (CMB) using a set of telescopes which will cover angular scales between 1 arcminute and tens of degrees, contain over 60,000 detectors, and observe at frequencies between 27 and 270 GHz. SO will consist of a 6 m aperture telescope coupled to over 30,000 transition-edge sensor bolometers along with three 42 cm aperture refractive telescopes, coupled to an additional 30,000+ detectors, all of which will be located in the Atacama Desert at an altitude of 5190 m. The powerful combination of large and small apertures in a CMB observatory will allow us to sample a wide range of angular scales over a common survey area. SO will measure fundamental cosmological parameters of our universe, constrain primordial fluctuations, find high redshift clusters via the Sunyaev-Zel`dovich effect, constrain properties of neutrinos, and trace the density and velocity of the matter in the universe over cosmic time. The complex set of technical and science requirements for this experiment has led to innovative instrumentation solutions which we will discuss. The large aperture telescope will couple to a cryogenic receiver that is 2.4 m in diameter and nearly 3 m long, creating a number of technical challenges. Concurrently, we are designing the array of cryogenic receivers housing the 42 cm aperture telescopes. We will discuss the sensor technology SO will use and we will give an overview of the drivers for and designs of the SO telescopes and receivers, with their cold optical components and detector arrays. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Journal ref: Proceedings of SPIE, Volume 10708, 2018, pages 10708 - 10708 - 13

Prime-Cam: A first-light instrument for the CCAT-prime telescope

Authors: Eve M. Vavagiakis, Zeeshan Ahmed, Aamir Ali, Kaustuv Basu, Nicholas Battaglia, Frank Bertoldi, Richard Bond, Ricardo Bustos, Scott C. Chapman, Dongwoo Chung, Gabriele Coppi, Nicholas F. Cothard, Simon Dicker, Cody J. Duell, Shannon M. Duff, Jens Erler, Michel Fich, Nicholas Galitzki, Patricio A. Gallardo, Shawn W. Henderson, Terry L. Herter, Gene Hilton, Johannes Hubmayr, Kent D. Irwin, Brian J. Koopman , et al. (21 additional authors not shown)

Abstract: CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high throughput, wide field of view capable of illuminating much larger arrays of sub-mm and mm detectors than can existing telescopes. We present an overview of the moti… ▽ More CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high throughput, wide field of view capable of illuminating much larger arrays of sub-mm and mm detectors than can existing telescopes. We present an overview of the motivation and design of Prime-Cam, a first-light instrument for CCAT-prime. Prime-Cam will house seven instrument modules in a 1.8 meter diameter cryostat, cooled by a dilution refrigerator. The optical elements will consist of silicon lenses, and the instrument modules can be individually optimized for particular science goals. The current design enables both broadband, dual-polarization measurements and narrow-band, Fabry-Perot spectroscopic imaging using multichroic transition-edge sensor (TES) bolometers operating between 190 and 450 GHz. It also includes broadband kinetic induction detectors (KIDs) operating at 860 GHz. This wide range of frequencies will allow excellent characterization and removal of galactic foregrounds, which will enable precision measurements of the sub-mm and mm sky. Prime-Cam will be used to constrain cosmology via the Sunyaev-Zeldovich effects, map the intensity of [CII] 158 $μ$m emission from the Epoch of Reionization, measure Cosmic Microwave Background polarization and foregrounds, and characterize the star formation history over a wide range of redshifts. More information about CCAT-prime can be found at www.ccatobservatory.org. △ Less

Submitted 29 June, 2018; originally announced July 2018.

Comments: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, June 15th, 2018

BoloCalc: a sensitivity calculator for the design of Simons Observatory

Authors: Charles A. Hill, Sarah Marie M. Bruno, Sara M. Simon, Aamir Ali, Kam S. Arnold, Peter C. Ashton, Darcy Barron, Sean Bryan, Yuji Chinone, Gabriele Coppi, Kevin T. Crowley, Ari Cukierman, Simon Dicker, Jo Dunkley, Giulio Fabbian, Nicholas Galitzki, Patricio A. Gallardo, Jon E. Gudmundsson, Johannes Hubmayr, Brian Keating, Akito Kusaka, Adrian T. Lee, Frederick Matsuda, Philip D. Mauskopf, Jeffrey McMahon , et al. (12 additional authors not shown)

Abstract: The Simons Observatory (SO) is an upcoming experiment that will study temperature and polarization fluctuations in the cosmic microwave background (CMB) from the Atacama Desert in Chile. SO will field both a large aperture telescope (LAT) and an array of small aperture telescopes (SATs) that will observe in six bands with center frequencies spanning from 27 to 270~GHz. Key considerations during th… ▽ More The Simons Observatory (SO) is an upcoming experiment that will study temperature and polarization fluctuations in the cosmic microwave background (CMB) from the Atacama Desert in Chile. SO will field both a large aperture telescope (LAT) and an array of small aperture telescopes (SATs) that will observe in six bands with center frequencies spanning from 27 to 270~GHz. Key considerations during the SO design phase are vast, including the number of cameras per telescope, focal plane magnification and pixel density, in-band optical power and camera throughput, detector parameter tolerances, and scan strategy optimization. To inform the SO design in a rapid, organized, and traceable manner, we have created a Python-based sensitivity calculator with several state-of-the-art features, including detector-to-detector optical white-noise correlations, a handling of simulated and measured bandpasses, and propagation of low-level parameter uncertainties to uncertainty in on-sky noise performance. We discuss the mathematics of the sensitivity calculation, the calculator's object-oriented structure and key features, how it has informed the design of SO, and how it can enhance instrument design in the broader CMB community, particularly for CMB-S4. △ Less

Submitted 15 August, 2021; v1 submitted 11 June, 2018; originally announced June 2018.

Comments: Submitted to the Proceedings of SPIE: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX

Journal ref: Proc. SPIE 10708, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX, 1070842 (9 July 2018)

Relative Alignment Between the Magnetic Field and Molecular Gas Structure in the Vela C Giant Molecular Cloud using Low and High Density Tracers

Authors: Laura M. Fissel, Peter A. R. Ade, Francesco E. Angilè, Peter Ashton, Steven J. Benton, Che-Yu Chen, Maria Cunningham, Mark J. Devlin, Bradley Dober, Rachel Friesen, Yasuo Fukui, Nicholas Galitzki, Natalie N. Gandilo, Alyssa Goodman, Claire-Elise Green, Paul Jones, Jeffrey Klein, Patrick King, Andrei L. Korotkov, Zhi-Yun Li, Vicki Lowe, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura , et al. (15 additional authors not shown)

Abstract: We compare the magnetic field orientation for the young giant molecular cloud Vela C inferred from 500-$μ$m polarization maps made with the BLASTPol balloon-borne polarimeter to the orientation of structures in the integrated line emission maps from Mopra observations. Averaging over the entire cloud we find that elongated structures in integrated line-intensity, or zeroth-moment maps, for low den… ▽ More We compare the magnetic field orientation for the young giant molecular cloud Vela C inferred from 500-$μ$m polarization maps made with the BLASTPol balloon-borne polarimeter to the orientation of structures in the integrated line emission maps from Mopra observations. Averaging over the entire cloud we find that elongated structures in integrated line-intensity, or zeroth-moment maps, for low density tracers such as $^{12}$CO and $^{13}$CO $J$ $\rightarrow$ 1 - 0 are statistically more likely to align parallel to the magnetic field, while intermediate or high density tracers show (on average) a tendency for alignment perpendicular to the magnetic field. This observation agrees with previous studies of the change in relative orientation with column density in Vela C, and supports a model where the magnetic field is strong enough to have influenced the formation of dense gas structures within Vela C. The transition from parallel to no preferred/perpendicular orientation appears to happen between the densities traced by $^{13}$CO and by C$^{18}$O $J$ $\rightarrow$ 1 - 0. Using RADEX radiative transfer models to estimate the characteristic number density traced by each molecular line we find that the transition occurs at a molecular hydrogen number density of approximately $10^3$ cm$^{-3}$. We also see that the Centre-Ridge (the highest column density and most active star-forming region within Vela C) appears to have a transition at a lower number density, suggesting that this may depend on the evolutionary state of the cloud. △ Less

Submitted 2 April, 2019; v1 submitted 24 April, 2018; originally announced April 2018.

Comments: 27 pages, 15 figures, accepted for publication in ApJ

First Observation of the Submillimeter Polarization Spectrum in a Translucent Molecular Cloud

Authors: Peter C. Ashton, Peter A. R. Ade, Francesco E. Angilè, Steven J. Benton, Mark J. Devlin, Bradley Dober, Laura M. Fissel, Yasuo Fukui, Nicholas Galitzki, Natalie N. Gandilo, Jeffrey Klein, Andrei K. Korotkov, Zhi-Yun Li, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura, Calvin B. Netterfield, Giles Novak, Enzo Pascale, Frédéric Poidevin, Fabio P. Santos, Giorgio Savini, Douglas Scott, Jamil A. Shariff , et al. (5 additional authors not shown)

Abstract: Polarized emission from aligned dust is a crucial tool for studies of magnetism in the ISM and a troublesome contaminant for studies of CMB polarization. In each case, an understanding of the significance of the polarization signal requires well-calibrated physical models of dust grains. Despite decades of progress in theory and observation, polarized dust models remain largely underconstrained. D… ▽ More Polarized emission from aligned dust is a crucial tool for studies of magnetism in the ISM and a troublesome contaminant for studies of CMB polarization. In each case, an understanding of the significance of the polarization signal requires well-calibrated physical models of dust grains. Despite decades of progress in theory and observation, polarized dust models remain largely underconstrained. During its 2012 flight, the balloon-borne telescope BLASTPol obtained simultaneous broad-band polarimetric maps of a translucent molecular cloud at 250, 350, and 500 microns. Combining these data with polarimetry from the Planck 850 micron band, we have produced a submillimeter polarization spectrum for a cloud of this type for the first time. We find the polarization degree to be largely constant across the four bands. This result introduces a new observable with the potential to place strong empirical constraints on ISM dust polarization models in a previously inaccessible density regime. Comparing with models by Draine and Fraisse (2009), our result disfavors two of their models for which all polarization arises due only to aligned silicate grains. By creating simple models for polarized emission in a translucent cloud, we verify that extinction within the cloud should have only a small effect on the polarization spectrum shape compared to the diffuse ISM. Thus we expect the measured polarization spectrum to be a valid check on diffuse ISM dust models. The general flatness of the observed polarization spectrum suggests a challenge to models where temperature and alignment degree are strongly correlated across major dust components. △ Less

Submitted 10 July, 2017; originally announced July 2017.

Comments: 17 pages, 10 figures. Submitted to ApJ

A Measurement of the Cosmic Microwave Background $B$-Mode Polarization Power Spectrum at Sub-Degree Scales from 2 years of POLARBEAR Data

Authors: The POLARBEAR Collaboration, P. A. R. Ade, M. Aguilar, Y. Akiba, K. Arnold, C. Baccigalupi, D. Barron, D. Beck, F. Bianchini, D. Boettger, J. Borrill, S. Chapman, Y. Chinone, K. Crowley, A. Cukierman, M. Dobbs, A. Ducout, R. Dünner, T. Elleflot, J. Errard, G. Fabbian, S. M. Feeney, C. Feng, T. Fujino, N. Galitzki , et al. (57 additional authors not shown)

Abstract: We report an improved measurement of the cosmic microwave background (CMB) $B$-mode polarization power spectrum with the POLARBEAR experiment at 150 GHz. By adding new data collected during the second season of observations (2013-2014) to re-analyzed data from the first season (2012-2013), we have reduced twofold the band-power uncertainties. The band powers are reported over angular multipoles… ▽ More We report an improved measurement of the cosmic microwave background (CMB) $B$-mode polarization power spectrum with the POLARBEAR experiment at 150 GHz. By adding new data collected during the second season of observations (2013-2014) to re-analyzed data from the first season (2012-2013), we have reduced twofold the band-power uncertainties. The band powers are reported over angular multipoles $500 \leq \ell \leq 2100$, where the dominant $B$-mode signal is expected to be due to the gravitational lensing of $E$-modes. We reject the null hypothesis of no $B$-mode polarization at a confidence of 3.1$σ$ including both statistical and systematic uncertainties. We test the consistency of the measured $B$-modes with the $Λ$ Cold Dark Matter ($Λ$CDM) framework by fitting for a single lensing amplitude parameter $A_L$ relative to the Planck best-fit model prediction. We obtain $A_L = 0.60 ^{+0.26} _{-0.24} ({\rm stat}) ^{+0.00} _{-0.04}({\rm inst}) \pm 0.14 ({\rm foreground}) \pm 0.04 ({\rm multi})$, where $A_{L}=1$ is the fiducial $Λ$CDM value, and the details of the reported uncertainties are explained later in the manuscript. △ Less

Submitted 27 October, 2017; v1 submitted 8 May, 2017; originally announced May 2017.

Comments: 16 pages, 10 figures. Minor changes to match the published version. For data and figures, see http://bolo.berkeley.edu/polarbear/data/polarbear_BB_2017/

Journal ref: The Astrophysical Journal, 848:141, 2017

Performance of a continuously rotating half-wave plate on the POLARBEAR telescope

Authors: Satoru Takakura, Mario Aguilar, Yoshiki Akiba, Kam Arnold, Carlo Baccigalupi, Darcy Barron, Shawn Beckman, David Boettger, Julian Borrill, Scott Chapman, Yuji Chinone, Ari Cukierman, Anne Ducout, Tucker Elleflot, Josquin Errard, Giulio Fabbian, Takuro Fujino, Nicholas Galitzki, Neil Goeckner-Wald, Nils W. Halverson, Masaya Hasegawa, Kaori Hattori, Masashi Hazumi, Charles Hill, Logan Howe , et al. (28 additional authors not shown)

Abstract: A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector… ▽ More A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, $I$, $Q$ and $U$, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector pairs. We focus on the implementation of CRHWPs in large aperture telescopes (i.e. the primary mirror is larger than the current maximum half-wave plate diameter of $\sim$0.5 m), where the CRHWP can be placed between the primary mirror and focal plane. In this configuration, one needs to address the intensity to polarization ($I{\rightarrow}P$) leakage of the optics, which becomes a source of 1/f noise and also causes differential gain systematics that arise from CMB temperature fluctuations. In this paper, we present the performance of a CRHWP installed in the POLARBEAR experiment, which employs a Gregorian telescope with a 2.5 m primary illumination pattern. The CRHWP is placed near the prime focus between the primary and secondary mirrors. We find that the $I{\rightarrow}P$ leakage is larger than the expectation from the physical properties of our primary mirror, resulting in a 1/f knee of 100 mHz. The excess leakage could be due to imperfections in the detector system, i.e. detector non-linearity in the responsivity and time-constant. We demonstrate, however, that by subtracting the leakage correlated with the intensity signal, the 1/f noise knee frequency is reduced to 32 mHz ($\ell \sim$39 for our scan strategy), which is very promising to probe the primordial B-mode signal. We also discuss methods for further noise subtraction in future projects where the precise temperature control of instrumental components and the leakage reduction will play a key role. △ Less

Submitted 27 May, 2017; v1 submitted 23 February, 2017; originally announced February 2017.

Comments: 27 pages, 5 figures, 3 tables, published version in JCAP. Includes some minor corrections

Journal ref: JCAP 05 (2017) 008

On the relation between the column density structures and the magnetic field orientation in the Vela C molecular complex

Authors: J. D. Soler, P. A. R. Ade, F. E. Angilè, P. Ashton, S. J. Benton, M. J. Devlin, B. Dober, L. M. Fissel, Y. Fukui, N. Galitzki, N. N. Gandilo, P. Hennebelle, J. Klein, Z. -Y. Li, A. L. Korotkov, P. G. Martin, T. G. Matthews, L. Moncelsi, C. B. Netterfield, G. Novak, E. Pascale, F. Poidevin, F. P. Santos, G. Savini, D. Scott , et al. (5 additional authors not shown)

Abstract: We statistically evaluate the relative orientation between gas column density structures, inferred from Herschel submillimetre observations, and the magnetic field projected on the plane of sky, inferred from polarized thermal emission of Galactic dust observed by BLASTPol at 250, 350, and 500 micron, towards the Vela C molecular complex. First, we find very good agreement between the polarization… ▽ More We statistically evaluate the relative orientation between gas column density structures, inferred from Herschel submillimetre observations, and the magnetic field projected on the plane of sky, inferred from polarized thermal emission of Galactic dust observed by BLASTPol at 250, 350, and 500 micron, towards the Vela C molecular complex. First, we find very good agreement between the polarization orientations in the three wavelength-bands, suggesting that, at the considered common angular resolution of 3.0 arcminutes that corresponds to a physical scale of approximately 0.61 pc, the inferred magnetic field orientation is not significantly affected by temperature or dust grain alignment effects. Second, we find that the relative orientation between gas column density structures and the magnetic field changes progressively with increasing gas column density, from mostly parallel or having no preferred orientation at low column densities to mostly perpendicular at the highest column densities. This observation is in agreement with previous studies by the Planck collaboration towards more nearby molecular clouds. Finally, we find a correspondence between the trends in relative orientation and the shape of the column density probability distribution functions. In the sub-regions of Vela C dominated by one clear filamentary structure, or "ridges", we find a sharp transition from preferentially parallel or having no preferred relative orientation at low column densities to preferentially perpendicular at highest column densities. In the sub-regions of Vela C dominated by several filamentary structures with multiple orientations, or "nests", such a transition is also present, but it is clearly less sharp than in the ridge-like sub-regions. Both of these results suggest that the magnetic field is dynamically important for the formation of density structures in this region. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Comments: 16 pages, 17 figures. Submitted to A&A

Report number: aa30608-17

Journal ref: A&A 603, A64 (2017)

Instrumental performance and results from testing of the BLAST-TNG receiver, submillimeter optics, and MKID arrays

Authors: Nicholas Galitzki, Peter Ade, Francesco E. Angile, Peter Ashton, Jason Austermann, Tashalee Billings, George Che, Hsiao-Mei Cho, Kristina Davis, Mark Devlin, Simon Dicker, Bradley J. Dober, Laura M. Fissel, Yasuo Fukui, Jiansong Gao, Samuel Gordon, Christopher E. Groppi, Seth Hillbrand, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Jeffrey Klein, Dale Li, Zhi-Yun Li, Nathan P. Lourie , et al. (17 additional authors not shown)

Abstract: Polarized thermal emission from interstellar dust grains can be used to map magnetic fields in star forming molecular clouds and the diffuse interstellar medium (ISM). The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) flew from Antarctica in 2010 and 2012 and produced degree-scale polarization maps of several nearby molecular clouds with arcminute resolution. The… ▽ More Polarized thermal emission from interstellar dust grains can be used to map magnetic fields in star forming molecular clouds and the diffuse interstellar medium (ISM). The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) flew from Antarctica in 2010 and 2012 and produced degree-scale polarization maps of several nearby molecular clouds with arcminute resolution. The success of BLASTPol has motivated a next-generation instrument, BLAST-TNG, which will use more than 3000 linear polarization sensitive microwave kinetic inductance detectors (MKIDs) combined with a 2.5m diameter carbon fiber primary mirror to make diffraction-limited observations at 250, 350, and 500 $μ$m. With 16 times the mapping speed of BLASTPol, sub-arcminute resolution, and a longer flight time, BLAST-TNG will be able to examine nearby molecular clouds and the diffuse galactic dust polarization spectrum in unprecedented detail. The 250 $μ$m detector array has been integrated into the new cryogenic receiver, and is undergoing testing to establish the optical and polarization characteristics of the instrument. BLAST-TNG will demonstrate the effectiveness of kilo-pixel MKID arrays for applications in submillimeter astronomy. BLAST-TNG is scheduled to fly from Antarctica in December 2017 for 28 days and will be the first balloon-borne telescope to offer a quarter of the flight for "shared risk" observing by the community. △ Less

Submitted 18 August, 2016; originally announced August 2016.

Comments: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, June 29th, 2016

Journal ref: Proc. SPIE 9914, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, 99140J (July 19, 2016)

Comparing submillimeter polarized emission with near-infrared polarization of background stars for the Vela C molecular cloud

Authors: Fabio P. Santos, Peter A. R. Ade, Francesco E. Angile, Peter Ashton, Steven J. Benton, Mark J. Devlin, Bradley Dober, Laura M. Fissel, Yasuo Fukui, Nicholas Galitzki, Natalie N. Gandilo, Jeffrey Klein, Andrei L. Korotkov, Zhi-Yun Li, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura, Calvin B. Netterfield, Giles Novak, Enzo Pascale, Frederick Poidevin, Giorgio Savini, Douglas Scott, Jamil A. Shariff , et al. (5 additional authors not shown)

Abstract: We present a large-scale combination of near-infrared (near-IR) interstellar polarization data from background starlight with polarized emission data at submillimeter (sub-mm) wavelengths for the Vela C molecular cloud. The near-IR data consist of more than 6700 detections probing a range of visual extinctions between $2$ and $20\,$mag in and around the cloud. The sub-mm data was collected in Anta… ▽ More We present a large-scale combination of near-infrared (near-IR) interstellar polarization data from background starlight with polarized emission data at submillimeter (sub-mm) wavelengths for the Vela C molecular cloud. The near-IR data consist of more than 6700 detections probing a range of visual extinctions between $2$ and $20\,$mag in and around the cloud. The sub-mm data was collected in Antartica by the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol). This is the first direct combination of near-IR and sub-mm polarization data for a molecular cloud aimed at measuring the "polarization efficiency ratio" ($R_{\mathrm{eff}}$), a quantity that is expected to depend only on grain intrinsic physical properties. It is defined as $p_{500}/(p_{I}/τ_{V})$, where $p_{500}$ and $p_{I}$ are polarization fractions at $500\,μ$m and $I$-band, respectively, and $τ_{V}$ is the optical depth. To ensure that the same column density of material is producing both polarization from emission and from extinction, we conducted a careful selection of near-background stars using 2MASS, $Herschel$ and $Planck$ data. This selection excludes objects contaminated by the Galactic diffuse background material as well as objects located in the foreground. Accounting for statistical and systematic uncertainties, we estimate an average $R_{\mathrm{eff}}$ value of $2.4\pm0.8$, which can be used to test the predictions of dust grain models designed for molecular clouds when such predictions become available. $R_{\mathrm{eff}}$ appears to be relatively flat as a function of the cloud depth for the range of visual extinctions probed. △ Less

Submitted 24 February, 2017; v1 submitted 27 May, 2016; originally announced May 2016.

Comments: 23 pages, accepted by the Astrophysical Journal

Optical Demonstration of THz, Dual-Polarization Sensitive Microwave Kinetic Inductance Detectors

Authors: B. Dober, J. A. Austermann, J. A. Beall, D. Becker, G. Che, H. M. Cho, M. Devlin, S. M. Duff, N. Galitzki, J. Gao, C. Groppi, G. C. Hilton, J. Hubmayr, K. D. Irwin, C. M. McKenney, D. Li, N. Lourie, P. Mauskopf, M. R. Vissers, Y. Wang

Abstract: The next generation BLAST experiment (BLAST-TNG) is a suborbital balloon payload that seeks to map polarized dust emission in the 250 $μ$m, 350 $μ$m and 500 $μ$m wavebands. The instrument utilizes a stepped half-wave plate to reduce systematics. The general requirement of the detectors is that they are photon-noise-limited and dual-polarization sensitive. To achieve this goal, we are developing th… ▽ More The next generation BLAST experiment (BLAST-TNG) is a suborbital balloon payload that seeks to map polarized dust emission in the 250 $μ$m, 350 $μ$m and 500 $μ$m wavebands. The instrument utilizes a stepped half-wave plate to reduce systematics. The general requirement of the detectors is that they are photon-noise-limited and dual-polarization sensitive. To achieve this goal, we are developing three monolithic arrays of cryogenic sensors, one for each waveband. Each array is feedhorn-coupled and each spatial pixel consists of two orthogonally spaced polarization-sensitive microwave kinetic inductance detectors (MKIDs) fabricated from a Ti/TiN multilayer film. In previous work, we demonstrated photon-noise-limited sensitivity in 250 $μ$m waveband single polarization devices. In this work, we present the first results of dual-polarization sensitive MKIDs at 250 $μ$m. △ Less

Submitted 9 March, 2016; originally announced March 2016.

Comments: 7 pages, 4 figures, published by JLTP

Journal ref: Journal of Low Temperature Physics (2015): 1-7

Submillimeter Polarization Spectrum in the Vela C Molecular Cloud

Authors: Natalie N. Gandilo, Peter A. R. Ade, Francesco E. Angilè, Peter Ashton, Steven J. Benton, Mark J. Devlin, Bradley Dober, Laura M. Fissel, Yasuo Fukui, Nicholas Galitzki, Jeffrey Klein, Andrei L. Korotkov, Zhi-Yun Li, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura, Calvin B. Netterfield, Giles Novak, Enzo Pascale, Frédérick Poidevin, Fabio P. Santos, Giorgio Savini, Douglas Scott, Jamil A. Shariff , et al. (5 additional authors not shown)

Abstract: Polarization maps of the Vela C molecular cloud were obtained at 250, 350, and 500um during the 2012 flight of the balloon-borne telescope BLASTPol. These measurements are used in conjunction with 850um data from Planck to study the submillimeter spectrum of the polarization fraction for this cloud. The spectrum is relatively flat and does not exhibit a pronounced minimum at λ~350um as suggested b… ▽ More Polarization maps of the Vela C molecular cloud were obtained at 250, 350, and 500um during the 2012 flight of the balloon-borne telescope BLASTPol. These measurements are used in conjunction with 850um data from Planck to study the submillimeter spectrum of the polarization fraction for this cloud. The spectrum is relatively flat and does not exhibit a pronounced minimum at λ~350um as suggested by previous measurements of other molecular clouds. The shape of the spectrum does not depend strongly on the radiative environment of the dust, as quantified by the column density or the dust temperature obtained from Herschel data. The polarization ratios observed in Vela C are consistent with a model of a porous clumpy molecular cloud being uniformly heated by the interstellar radiation field. △ Less

Submitted 17 June, 2016; v1 submitted 21 December, 2015; originally announced December 2015.

Comments: 9 pages, 11 figures

Journal ref: The Astrophysical Journal, Volume 824, Number 2, p.84 (2016)

Balloon-Borne Submillimeter Polarimetry of the Vela C Molecular Cloud: Systematic Dependence of Polarization Fraction on Column Density and Local Polarization-Angle Dispersion

Authors: Laura M. Fissel, Peter A. R. Ade, Francesco E. Angilè, Peter Ashton, Steven Benton, Mark J. Devlin, Bradley Dober, Yasuo Fukui, Nicholas Galitzki, Natalie N. Gandilo, J. R. Klein, Zhi-Yun Li, Andrei L. Korotkov, Peter G. Martin, Tristan G. Matthews, Lorenzo Moncelsi, Fumitaka Nakamura, C. Barth Netterfield, Giles Novak, Enzo Pascale, Frédérick Poidevin, Fabio P. Santos, Giorgio Savini, Douglas Scott, Jamil A. Shariff , et al. (5 additional authors not shown)

Abstract: We present results for Vela C obtained during the 2012 flight of the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol). We mapped polarized intensity across almost the entire extent of this giant molecular cloud, in bands centered at 250, 350, and 500 μm. In this initial paper, we show our 500 μm data smoothed to a resolution of 2.5 arcminutes (approximately 0.5 pc).… ▽ More We present results for Vela C obtained during the 2012 flight of the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol). We mapped polarized intensity across almost the entire extent of this giant molecular cloud, in bands centered at 250, 350, and 500 μm. In this initial paper, we show our 500 μm data smoothed to a resolution of 2.5 arcminutes (approximately 0.5 pc). We show that the mean level of the fractional polarization p and most of its spatial variations can be accounted for using an empirical three-parameter power-law fit, p = p_0 N^(-0.4) S^(-0.6), where N is the hydrogen column density and S is the polarization-angle dispersion on 0.5 pc scales. The decrease of p with increasing S is expected because changes in the magnetic field direction within the cloud volume sampled by each measurement will lead to cancellation of polarization signals. The decrease of p with increasing N might be caused by the same effect, if magnetic field disorder increases for high column density sightlines. Alternatively, the intrinsic polarization efficiency of the dust grain population might be lower for material along higher density sightlines. We find no significant correlation between N and S. Comparison of observed submillimeter polarization maps with synthetic polarization maps derived from numerical simulations provides a promising method for testing star formation theories. Realistic simulations should allow for the possibility of variable intrinsic polarization efficiency. The measured levels of correlation among p, N, and S provide points of comparison between observations and simulations. △ Less

Submitted 29 April, 2016; v1 submitted 17 September, 2015; originally announced September 2015.

Comments: 24 pages, 20 figures, and 2 tables. Accepted for publication in ApJ. Updated from originally submitted version

The Next Generation BLAST Experiment

Authors: Nicholas Galitzki, Peter A. R. Ade, Francesco E. Angilè, Peter Ashton, James A. Beall, Dan Becker, Kristi J. Bradford, George Che, Hsiao-Mei Cho, Mark J. Devlin, Bradley J. Dober, Laura M. Fissel, Yasuo Fukui, Jiansong Gao, Christopher E. Groppi, Seth Hillbrand, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Jeffrey Klein, Jeff Van Lanen, Dale Li, Zhi-Yun Li, Nathan P. Lourie, Hamdi Mani , et al. (16 additional authors not shown)

Abstract: The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) was a suborbital experiment designed to map magnetic fields in order to study their role in star formation processes. BLASTPol made detailed polarization maps of a number of molecular clouds during its successful flights from Antarctica in 2010 and 2012. We present the next-generation BLASTPol instrument (BLAST-TNG… ▽ More The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) was a suborbital experiment designed to map magnetic fields in order to study their role in star formation processes. BLASTPol made detailed polarization maps of a number of molecular clouds during its successful flights from Antarctica in 2010 and 2012. We present the next-generation BLASTPol instrument (BLAST-TNG) that will build off the success of the previous experiment and continue its role as a unique instrument and a test bed for new technologies. With a 16-fold increase in mapping speed, BLAST-TNG will make larger and deeper maps. Major improvements include a 2.5 m carbon fiber mirror that is 40% wider than the BLASTPol mirror and ~3000 polarization sensitive detectors. BLAST-TNG will observe in three bands at 250, 350, and 500 microns. The telescope will serve as a pathfinder project for microwave kinetic inductance detector (MKID) technology, as applied to feedhorn coupled submillimeter detector arrays. The liquid helium cooled cryostat will have a 28-day hold time and will utilize a closed-cycle $^3$He refrigerator to cool the detector arrays to 270 mK. This will enable a detailed mapping of more targets with higher polarization resolution than any other submillimeter experiment to date. BLAST-TNG will also be the first balloon-borne telescope to offer shared risk observing time to the community. This paper outlines the motivation for the project and the instrumental design. △ Less

Submitted 12 November, 2014; v1 submitted 24 September, 2014; originally announced September 2014.

Journal ref: Journal of Astronomical Instrumentation, Vol. 3, No. 2 (2014) 1440001 (16 pages)

The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry-BLASTPol: Performance and results from the 2012 Antarctic flight

Authors: N. Galitzki, P. A. R. Ade, F. E. Angilé, S. J. Benton, M. J. Devlin, B. Dober, L. M. Fissel, Y. Fukui, N. N. Gandilo, J. Klein, A. L. Korotkov, T. G. Matthews, L. Moncelsi, C. B. Netterfield, G. Novak, D. Nutter, E. Pascale, F. Poidevin, G. Savini, D. Scott, J. A. Shariff, J. D. Soler, C. E. Tucker, G. S. Tucker, D. Ward-Thompson

Abstract: The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment, designed to study the role played by magnetic fields in the star formation process. BLASTPol observes polarized light using a total power instrument, photolithographic polarizing grids, and an achromatic half-wave plate to modulate the polarization signal. During its second fligh… ▽ More The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment, designed to study the role played by magnetic fields in the star formation process. BLASTPol observes polarized light using a total power instrument, photolithographic polarizing grids, and an achromatic half-wave plate to modulate the polarization signal. During its second flight from Antarctica in December 2012, BLASTPol made degree scale maps of linearly polarized dust emission from molecular clouds in three wavebands, centered at 250, 350, and 500 microns. The instrumental performance was an improvement over the 2010 BLASTPol flight, with decreased systematics resulting in a higher number of confirmed polarization vectors. The resultant dataset allows BLASTPol to trace magnetic fields in star-forming regions at scales ranging from cores to entire molecular cloud complexes. △ Less

Submitted 14 July, 2014; originally announced July 2014.

Comments: Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014

The next-generation BLASTPol experiment

Authors: Bradley Dober, Peter A. R. Ade, Peter Ashton, Francesco E. Angilè, James A. Beall, Dan Becker, Kristi J. Bradford, George Che, Hsiao-Mei Cho, Mark J. Devlin, Laura M. Fissel, Yasuo Fukui, Nicholas Galitzki, Jiansong Gao, Christopher E. Groppi, Seth Hillbrand, Gene C. Hilton, Johannes Hubmayr, Kent D. Irwin, Jeffrey Klein, Jeff Van Lanen, Dale Li, Zhi-Yun Li, Nathan P. Lourie, Hamdi Mani , et al. (14 additional authors not shown)

Abstract: The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment designed to study the role magnetic fields play in star formation. BLASTPol has had two science flights from McMurdo Station, Antarctica in 2010 and 2012. These flights have produced thousands of polarization vectors at 250, 350 and 500 microns in several molecular cloud targets.… ▽ More The Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol) is a suborbital mapping experiment designed to study the role magnetic fields play in star formation. BLASTPol has had two science flights from McMurdo Station, Antarctica in 2010 and 2012. These flights have produced thousands of polarization vectors at 250, 350 and 500 microns in several molecular cloud targets. We present the design, specifications, and progress towards the next-generation BLASTPol experiment (BLAST-TNG). BLAST-TNG will fly a 40% larger diameter primary mirror, with almost 8 times the number of polarization-sensitive detectors resulting in a factor of 16 increase in mapping speed. With a spatial resolution of 22 arcseconds and four times the field of view of BLASTPol, BLAST-TNG will bridge the angular scales between Planck's low resolution all-sky maps and ALMA's ultra-high resolution narrow fields. The new receiver has a larger cryogenics volume, allowing for a 28 day hold time. BLAST-TNG employs three arrays of Microwave Kinetic Inductance Detectors (MKIDs) with 30% fractional bandwidth at 250, 350 and 500 microns. In this paper, we will present the new BLAST-TNG instrument and science objectives. △ Less

Submitted 14 July, 2014; originally announced July 2014.

Comments: 12 pages, 6 figures. Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145

Thermal design and performance of the balloon-borne large aperture submillimeter telescope for polarimetry BLASTPol

Authors: J. D. Soler, P. A. R. Ade, F. E. Angilè, S. J. Benton, M. J. Devlin, B. Dober, L. M. Fissel, Y. Fukui, N. Galitzki, N. N. Gandilo, J. Klein, A. L. Korotkov, T. G. Matthews, L. Moncelsi, A. Mroczkowski, C. B. Netterfield, G. Novak, D. Nutter, E. Pascale, F. Poidevin, G. Savini, D. Scott, J. A. Shariff, N. E. Thomas, M. D. Truch , et al. (3 additional authors not shown)

Abstract: We present the thermal model of the Balloon-borne Large-Aperture Submillimeter Telescope for Polarimetry (BLASTPol). This instrument was successfully flown in two circumpolar flights from McMurdo, Antarctica in 2010 and 2012. During these two flights, BLASTPol obtained unprecedented information about the magnetic field in molecular clouds through the measurement of the polarized thermal emission o… ▽ More We present the thermal model of the Balloon-borne Large-Aperture Submillimeter Telescope for Polarimetry (BLASTPol). This instrument was successfully flown in two circumpolar flights from McMurdo, Antarctica in 2010 and 2012. During these two flights, BLASTPol obtained unprecedented information about the magnetic field in molecular clouds through the measurement of the polarized thermal emission of interstellar dust grains. The thermal design of the experiment addresses the stability and control of the payload necessary for this kind of measurement. We describe the thermal modeling of the payload including the sun-shielding strategy. We present the in-flight thermal performance of the instrument and compare the predictions of the model with the temperatures registered during the flight. We describe the difficulties of modeling the thermal behavior of the balloon-borne platform and establish landmarks that can be used in the design of future balloon-borne instruments. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: 18 pages, 11 figures. Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145

Attitude determination for balloon-borne experiments

Authors: N. N. Gandilo, P. A. R. Ade, M. Amiri, F. E. Angile, S. J. Benton, J. J. Bock, J. R. Bond, S. A. Bryan, H. C. Chiang, C. R. Contaldi, B. P. Crill, M. J. Devlin, B. Dober, O. P. Dore, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, Y. Fukui, N. Galitzki, A. E. Gambrel, S. Golwala, J. E. Gudmundsson, M. Halpern, M. Hasselfield , et al. (42 additional authors not shown)

Abstract: An attitude determination system for balloon-borne experiments is presented. The system provides pointing information in azimuth and elevation for instruments flying on stratospheric balloons over Antarctica. In-flight attitude is given by the real-time combination of readings from star cameras, a magnetometer, sun sensors, GPS, gyroscopes, tilt sensors and an elevation encoder. Post-flight attitu… ▽ More An attitude determination system for balloon-borne experiments is presented. The system provides pointing information in azimuth and elevation for instruments flying on stratospheric balloons over Antarctica. In-flight attitude is given by the real-time combination of readings from star cameras, a magnetometer, sun sensors, GPS, gyroscopes, tilt sensors and an elevation encoder. Post-flight attitude reconstruction is determined from star camera solutions, interpolated by the gyroscopes using an extended Kalman Filter. The multi-sensor system was employed by the Balloon-borne Large Aperture Submillimeter Telescope for Polarimetry (BLASTPol), an experiment that measures polarized thermal emission from interstellar dust clouds. A similar system was designed for the upcoming flight of SPIDER, a Cosmic Microwave Background polarization experiment. The pointing requirements for these experiments are discussed, as well as the challenges in designing attitude reconstruction systems for high altitude balloon flights. In the 2010 and 2012 BLASTPol flights from McMurdo Station, Antarctica, the system demonstrated an accuracy of <5' rms in-flight, and <5" rms post-flight. △ Less

Submitted 15 July, 2014; v1 submitted 7 July, 2014; originally announced July 2014.

Comments: 16 pages, 10 figures, Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145

BLASTbus electronics: general-purpose readout and control for balloon-borne experiments

Authors: S. J. Benton, P. A. Ade, M. Amiri, F. E. Angilè, J. J. Bock, J. R. Bond, S. A. Bryan, H. C. Chiang, C. R. Contaldi, B. P. Crill, M. J. Devlin, B. Dober, O. P. Doré, C. D. Dowell, M. Farhang, J. P. Filippini, L. M. Fissel, A. A. Fraisse, Y. Fukui, N. Galitzki, A. E. Gambrel, N. N. Gandilo, S. R. Golwala, J. E. Gudmundsson, M. Halpern , et al. (44 additional authors not shown)

Abstract: We present the second generation BLASTbus electronics. The primary purposes of this system are detector readout, attitude control, and cryogenic housekeeping, for balloon-borne telescopes. Readout of neutron transmutation doped germanium (NTD-Ge) bolometers requires low noise and parallel acquisition of hundreds of analog signals. Controlling a telescope's attitude requires the capability to inter… ▽ More We present the second generation BLASTbus electronics. The primary purposes of this system are detector readout, attitude control, and cryogenic housekeeping, for balloon-borne telescopes. Readout of neutron transmutation doped germanium (NTD-Ge) bolometers requires low noise and parallel acquisition of hundreds of analog signals. Controlling a telescope's attitude requires the capability to interface to a wide variety of sensors and motors, and to use them together in a fast, closed loop. To achieve these different goals, the BLASTbus system employs a flexible motherboard-daughterboard architecture. The programmable motherboard features a digital signal processor (DSP) and field-programmable gate array (FPGA), as well as slots for three daughterboards. The daughterboards provide the interface to the outside world, with versions for analog to digital conversion, and optoisolated digital input/output. With the versatility afforded by this design, the BLASTbus also finds uses in cryogenic, thermometry, and power systems. For accurate timing control to tie everything together, the system operates in a fully synchronous manner. BLASTbus electronics have been successfully deployed to the South Pole, and flown on stratospheric balloons. △ Less

Submitted 7 July, 2014; originally announced July 2014.

Comments: Presented at SPIE Ground-based and Airborne Telescopes V, June 23, 2014. To be published in Proceedings of SPIE Volume 9145