Showing 1–50 of 87 results for author: Ferretti, A

Experience gained about Resistive Plate Chambers ageing from the ALICE Muon TRigger/IDentifier detector

Authors: Alessandro Ferretti

Abstract: The ALICE Muon IDentifier is composed of 72 single-gap bakelite Resistive Plate Chambers, which have been operational since 2009 in maxi-avalanche mode (discrimination threshold:7 mV without amplification) with a Tetrafluoroethane/Isobutane/Sulfur Hexafluoride gas mixture, undergoing counting rates of the order of tens of Hz/cm^2. In this talk, the long-term performance and stability of the RPC sy… ▽ More The ALICE Muon IDentifier is composed of 72 single-gap bakelite Resistive Plate Chambers, which have been operational since 2009 in maxi-avalanche mode (discrimination threshold:7 mV without amplification) with a Tetrafluoroethane/Isobutane/Sulfur Hexafluoride gas mixture, undergoing counting rates of the order of tens of Hz/cm^2. In this talk, the long-term performance and stability of the RPC system will be discussed, in terms of efficiency, dark current and dark rate. An assessment of potential signs of ageing observed on the detectors will be presented, together with a summary of the most common hardware problems experienced. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 5 pages, 8 figures. Proceedings of the 3rd International Conference on Detector Stability and Aging Phenomena in Gaseous Detectors, 6-10 November 2023, CERN

In-beam performance of a Resistive Plate Chamber operated with eco-friendly gas mixtures

Authors: L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi , et al. (32 additional authors not shown)

Abstract: ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identifi… ▽ More ALICE (A Large Ion Collider Experiment) studies the Quark-Gluon Plasma (QGP): a deconfined state of matter obtained in ultra-relativistic heavy-ion collisions. One of the probes for QGP study are quarkonia and open heavy flavour, of which ALICE exploits the muonic decay. A set of Resistive Plate Chambers (RPCs), placed in the forward rapidity region of the ALICE detector, is used for muon identification purposes. The correct operation of these detectors is ensured by the choice of the proper gas mixture. Currently they are operated with a mixture of C$_{2}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ but, starting from 2017, new EU regulations have enforced a progressive phase-out of C$_{2}$H$_{2}$F$_{4}$ because of its large Global Warming Potential (GWP), making it difficult and costly to purchase. CERN asked LHC experiments to reduce greenhouse gases emissions, to which RPC operation contributes significantly. A possible candidate for C$_{2}$H$_{2}$F$_{4}$ replacement is the C$_{3}$H$_{2}$F$_{4}$ (diluted with other gases, such as CO$_{2}$), which has been extensively tested using cosmic rays. Promising gas mixtures have been devised; the next crucial steps are the detailed in-beam characterization of such mixtures as well as the study of their performance under increasing irradiation levels. This contribution will describe the methodology and results of beam tests carried out at the CERN GIF++ (equipped with a high activity $^{137}$Cs source and muon beam) with an ALICE-like RPC prototype, operated with several mixtures with varying proportions of CO$_{2}$, C$_{3}$H$_{2}$F$_{4}$, i-C$_{4}$H$_{10}$ and SF$_{6}$ . Absorbed currents, efficiencies, prompt charges, cluster sizes, time resolutions and rate capabilities will be presented, both from digitized (for detailed shape and charge analysis) and discriminated (using the same front-end electronics as employed in ALICE) signals. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging

Authors: The RPC ECOGas@GIF++ collaboration, :, L. Quaglia, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti , et al. (35 additional authors not shown)

Abstract: Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, invo… ▽ More Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), commonly known as R-134a, which has a global warming potential (GWP) of 1430. To comply with European regulations and explore environmentally friendly alternatives, the RPC EcoGas@GIF++ collaboration, involving ALICE, ATLAS, CMS, LHCb/SHiP, and EP-DT communities, has undertaken intensive R\&D efforts to explore new gas mixtures for RPC technology. A leading alternative under investigation is HFO1234ze, boasting a low GWP of 6 and demonstrating reasonable performance compared to R-134a. Over the past few years, RPC detectors with slightly different characteristics and electronics have been studied using HFO and CO$_{2}$-based gas mixtures at the CERN Gamma Irradiation Facility. An aging test campaign was launched in August 2022, and during the latest test beam in July 2023, all detector systems underwent evaluation. This contribution will report the results of the aging studies and the performance evaluations of the detectors with and without irradiation. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility

Authors: L. Quaglia, D. Ramos, M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, D. Boscherini, F. Bordon, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciacco, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati , et al. (33 additional authors not shown)

Abstract: Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in a… ▽ More Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs with diverse electronics, gas gap thicknesses and detector layouts at the CERN Gamma Irradiation Facility (GIF++). The studies aim at assessing the performance of RPCs when filled with new eco-friendly gas mixtures in avalanche mode and in view of evaluating possible ageing effects after long high background irradiation periods, e.g. High-Luminosity LHC phase. This challenging research is also part of a task of the European AidaInnova project. A promising eco-friendly gas identified for RPC operation is the tetrafluoruropropene (C$_{3}$H$_{2}$F$_{4}$, commercially known as HFO-1234ze) that has been studied at the CERN GIF++ in combination with different percentages of CO$_2$. Between the end of 2021 and 2022 several beam tests have been carried out to establish the performance of RPCs operated with such mixtures before starting the irradiation campaign for the ageing study. Results of these tests for different RPCs layouts and different gas mixtures, under increasing background rates are presented here, together with the preliminary outcome of the detector ageing tests. △ Less

Submitted 29 November, 2023; originally announced November 2023.

High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures

Authors: M. Abbrescia, G. Aielli, R. Aly, M. C. Arena, M. Barroso, L. Benussi, S. Bianco, F. Bordon, D. Boscherini, A. Bruni, S. Buontempo, M. Busato, P. Camarri, R. Cardarelli, L. Congedo, D. De Jesus Damiao, M. De Serio, A. Di Ciaccio, L. Di Stante, P. Dupieux, J. Eysermans, A. Ferretti, G. Galati, M. Gagliardi, R. Guida , et al. (30 additional authors not shown)

Abstract: Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider exp… ▽ More Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide, are shown and discussed in this paper. Tests aimed to assess the performance of this kind of detectors in high-irradiation conditions, analogous to the ones foreseen for the coming years at the Large Hadron Collider experiments, were performed, and demonstrate a performance basically similar to the one obtained with the gas mixtures currently in use, based on Tetrafluoroethane, which is being progressively phased out for its possible contribution to the greenhouse effect. Long term aging tests are also being carried out, with the goal to demonstrate the possibility of using these eco-friendly gas mixtures during the whole High Luminosity phase of the Large Hadron Collider. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: Submitted to European Physical Journal C on October 24, 2023, 15 pages, 14 figures

On Green's function embedding using sum-over-pole representations

Authors: Andrea Ferretti, Tommaso Chiarotti, Nicola Marzari

Abstract: In Green's function theory, the total energy of an interacting many-electron system can be expressed in a variational form using the Klein or Luttinger-Ward functionals. Green's function theory also naturally addresses the case where the interacting system is embedded into a bath. This latter can then act as a dynamical (i.e., frequency-dependent) potential, providing a more general framework than… ▽ More In Green's function theory, the total energy of an interacting many-electron system can be expressed in a variational form using the Klein or Luttinger-Ward functionals. Green's function theory also naturally addresses the case where the interacting system is embedded into a bath. This latter can then act as a dynamical (i.e., frequency-dependent) potential, providing a more general framework than that of conventional static external potentials. Notably, the Klein functional includes a term of the form $\text{Tr}_ω\text{Ln}\left\{G_0^{-1}G\right\}$, where $\text{Tr}_ω$ is the frequency integration of the trace operator. Here, we show that using a sum-over-pole representation for the Green's functions and the algorithmic-inversion method one can obtain in full generality an explicit analytical expression for $\text{Tr}_ω\text{Ln}\left\{G_0^{-1}G\right\}$. This allows one, e.g., to derive a variational expression for the Klein functional in the presence of an embedding bath, or to provide an explicit expression of the RPA correlation energy in the framework of the optimized effective potential. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Comments: 11 pages, 3 figures

Efficient GW calculations via the interpolation of the screened interaction in momentum and frequency space: The case of graphene

Authors: Alberto Guandalini, Dario A. Leon, Pino D'Amico, Claudia Cardoso, Andrea Ferretti, Massimo Rontani, Daniele Varsano

Abstract: The GW self-energy may become computationally challenging to evaluate because of frequency and momentum convolutions. These difficulties were recently addressed by the development of the multipole approximation (MPA) and the W-av methods: MPA accurately approximates full-frequency response functions using a small number of poles, while W-av improves the convergence with respect to the k-point samp… ▽ More The GW self-energy may become computationally challenging to evaluate because of frequency and momentum convolutions. These difficulties were recently addressed by the development of the multipole approximation (MPA) and the W-av methods: MPA accurately approximates full-frequency response functions using a small number of poles, while W-av improves the convergence with respect to the k-point sampling in 2D materials. In this work we (i) present a theoretical scheme to combine them, and (ii) apply the newly developed approach to the paradigmatic case of graphene. Our findings show an excellent agreement of the calculated QP band structure with angle resolved photoemission spectroscopy (ARPES) data. Furthermore, the computational efficiency of MPA and W-av allows us to explore the logarithmic renormalization of the Dirac cone. To this aim, we develop an analytical model, derived from a Dirac Hamiltonian, that we parameterize using ab-initio data. The comparison of the models obtained with PPA and MPA results highlights an important role of the dynamical screening in the cone renormalization. △ Less

Submitted 9 October, 2023; v1 submitted 21 April, 2023; originally announced April 2023.

Comments: A. Guandalini and D. A. Leon contributed equally to this work

Energies and spectra of solids from the algorithmic inversion of dynamical Hubbard functionals

Authors: Tommaso Chiarotti, Andrea Ferretti, Nicola Marzari

Abstract: Energy functionals of the Green's function can simultaneously provide spectral and thermodynamic properties of interacting electrons' systems. Though powerful in principle, these formulations need to deal with dynamical (frequency-dependent) quantities, increasing the algorithmic and numerical complexity and limiting applications. We first show that, when representing all frequency-dependent propa… ▽ More Energy functionals of the Green's function can simultaneously provide spectral and thermodynamic properties of interacting electrons' systems. Though powerful in principle, these formulations need to deal with dynamical (frequency-dependent) quantities, increasing the algorithmic and numerical complexity and limiting applications. We first show that, when representing all frequency-dependent propagators as sums over poles, the typical operations of dynamical formulations become closed (i.e., all quantities are expressed as sums over poles) and analytical. Importantly, we map the Dyson equation into a nonlinear eigenvalue problem that can be solved exactly; this is achieved by introducing a fictitious non-interacting system with additional degrees of freedom which shares, upon projection, the same Green's function of the real system. Last, we introduce an approximation to the exchange-correlation part of the Klein functional adopting a localized $GW$ approach; this is a generalization of the static Hubbard extension of density-functional theory with a dynamical screened potential $U(ω)$. We showcase the algorithmic efficiency of the methods, and the physical accuracy of the functional, by computing the spectral, thermodynamic, and vibrational properties of SrVO$_3$, finding results in close agreement with experiments and state-of-the-art methods, at highly reduced computational costs and with a transparent physical interpretation. △ Less

Submitted 26 May, 2024; v1 submitted 23 February, 2023; originally announced February 2023.

Quenching of low-energy optical absorption in bilayer C$_3$N polytypes

Authors: Matteo Zanfrognini, Miki Bonacci, Fulvio Paleari, Elisa Molinari, Alice Ruini, Andrea Ferretti, Marilia J. Caldas, Daniele Varsano

Abstract: In this work we provide a first principles description of the electronic and optical properties of bilayers C$_3$N, with different stacking motifs AB, AB$'$ and AA$'$. Starting from quasi-particle electronic band-structures, we solve the Bethe Salpeter Equation (BSE) to access the excitonic properties of these bilayers. For all stacking sequences, we see strong optical absorption at energies lower… ▽ More In this work we provide a first principles description of the electronic and optical properties of bilayers C$_3$N, with different stacking motifs AB, AB$'$ and AA$'$. Starting from quasi-particle electronic band-structures, we solve the Bethe Salpeter Equation (BSE) to access the excitonic properties of these bilayers. For all stacking sequences, we see strong optical absorption at energies lower than but close to that of the monolayer. Most relevant, we predict a strong quenching of the low-energy optical absorption, with negligible oscillator strength of low-lying bound excitons. This is a unique phenomenology that does not arise in the monolayer case, nor in other common homo-bilayers. We explain these findings in terms of the small interband dipole matrix elements associated to the valence-conduction transitions involved in these excitons, and discuss them in view of the different stacking motifs. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Comments: 13 pages, 8 figures

koopmans: an open-source package for accurately and efficiently predicting spectral properties with Koopmans functionals

Authors: Edward Linscott, Nicola Colonna, Riccardo De Gennaro, Ngoc Linh Nguyen, Giovanni Borghi, Andrea Ferretti, Ismaila Dabo, Nicola Marzari

Abstract: Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in con… ▽ More Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in contrast to semi-local DFT, where a mismatch between the two lies at the heart of the band gap problem and, more generally, the unreliability of Kohn-Sham orbital energies). This strategy has proven to be very powerful, yielding molecular orbital energies and solid-state band structures with comparable accuracy to many-body perturbation theory but at greatly reduced computational cost while preserving a functional formulation. This paper reviews the theory of Koopmans functionals, discusses the algorithms necessary for their implementation, and introduces koopmans, an open-source package that contains all of the code and workflows needed to perform Koopmans functional calculations and obtain reliable spectral properties of molecules and materials. △ Less

Submitted 7 August, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Comments: 73 pages, 4 figures, 3 tables. Document includes supporting information

Excitonic effects in energy loss spectra of freestanding graphene

Authors: Alberto Guandalini, Ryosuke Senga, Yung-Chang Lin, Kazu Suenaga, Andrea Ferretti, Daniele Varsano, Andrea Recchia, Paolo Barone, Francesco Mauri, Thomas Pichler, Christian Kramberger

Abstract: In this work we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS with ab initio calculations… ▽ More In this work we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS with ab initio calculations at increasing levels of theory. Quasi-particle corrections and excitonic effects are addressed within the GW approximation and Bethe-Salpeter equation, respectively. Both effects are essential in the description of the EEL spectra to obtain a quantitative agreement with experiments, with the position, dispersion, and shape of both the excitation gap and the $π$ plasmon being significantly affected by excitonic effects. △ Less

Submitted 10 October, 2023; v1 submitted 13 February, 2023; originally announced February 2023.

Towards high-throughput many-body perturbation theory: efficient algorithms and automated workflows

Authors: Miki Bonacci, Junfeng Qiao, Nicola Spallanzani, Antimo Marrazzo, Giovanni Pizzi, Elisa Molinari, Daniele Varsano, Andrea Ferretti, Deborah Prezzi

Abstract: The automation of ab initio simulations is essential in view of performing high-throughput (HT) computational screenings oriented to the discovery of novel materials with desired physical properties. In this work, we propose algorithms and implementations that are relevant to extend this approach beyond density functional theory (DFT), in order to automate many-body perturbation theory (MBPT) calc… ▽ More The automation of ab initio simulations is essential in view of performing high-throughput (HT) computational screenings oriented to the discovery of novel materials with desired physical properties. In this work, we propose algorithms and implementations that are relevant to extend this approach beyond density functional theory (DFT), in order to automate many-body perturbation theory (MBPT) calculations. Notably, a novel algorithm pursuing the goal of an efficient and robust convergence procedure for GW and BSE simulations is provided, together with its implementation in a fully automated framework. This is accompanied by an automatic GW band interpolation scheme based on maximally-localized Wannier functions, aiming at a reduction of the computational burden of quasiparticle band structures while preserving high accuracy. The proposed developments are validated on a set of representative semiconductor and metallic systems. △ Less

Submitted 18 January, 2023; v1 submitted 16 January, 2023; originally announced January 2023.

Comments: 14 pages, 6 figures

Journal ref: npj Computational Materials volume 9, Article number: 74 (2023)

Efficient full frequency GW for metals using a multipole approach for the dielectric screening

Authors: Dario A. Leon, Andrea Ferretti, Daniele Varsano, Elisa Molinari, Claudia Cardoso

Abstract: The properties of metallic systems with important and structured excitations at low energies, such as Cu, are challenging to describe with simple models like the plasmon pole approximation (PPA), and more accurate and sometimes prohibitive full frequency approaches are usually required. In this paper we propose a numerical approach to $GW$ calculations on metals that takes into account the frequen… ▽ More The properties of metallic systems with important and structured excitations at low energies, such as Cu, are challenging to describe with simple models like the plasmon pole approximation (PPA), and more accurate and sometimes prohibitive full frequency approaches are usually required. In this paper we propose a numerical approach to $GW$ calculations on metals that takes into account the frequency dependence of the screening via the multipole approximation (MPA), an accurate and efficient alternative to current full-frequency methods that was recently developed and validated for semiconductors and overcomes several limitations of PPA. We now demonstrate that MPA can be successfully extended to metallic systems by optimizing the frequency sampling for this class of materials and introducing a simple method to include the $\mathbf{q}\to 0$ limit of the intra-band contributions. The good agreement between MPA and full frequency results for the calculations of quasi-particle energies, polarizability, self-energy and spectral functions in different metallic systems confirms the accuracy and computational efficiency of the method. Finally, we discuss the physical interpretation of the MPA poles through a comparison with experimental electron energy loss spectra for Cu. △ Less

Submitted 5 January, 2023; originally announced January 2023.

Comments: 21 pages

Letter of Intent: the NA60+ experiment

Authors: C. Ahdida, G. Alocco, F. Antinori, M. Arba, M. Aresti, R. Arnaldi, A. Baratto Roldan, S. Beole, A. Beraudo, J. Bernhard, L. Bianchi, M. Borysova, S. Bressler, S. Bufalino, E. Casula, C. Cicalo, S. Coli, P. Cortese, A. Dainese, H. Danielsson, A. De Falco, K. Dehmelt, A. Drees, A. Ferretti, F. Fionda , et al. (37 additional authors not shown)

Abstract: We propose a new fixed-target experiment for the study of electromagnetic and hard probes of the Quark-Gluon Plasma (QGP) in heavy-ion collisions at the CERN SPS. The experiment aims at performing measurements of the dimuon spectrum from threshold up to the charmonium region, and of hadronic decays of charm and strange hadrons. It is based on a muon spectrometer, which includes a toroidal magnet a… ▽ More We propose a new fixed-target experiment for the study of electromagnetic and hard probes of the Quark-Gluon Plasma (QGP) in heavy-ion collisions at the CERN SPS. The experiment aims at performing measurements of the dimuon spectrum from threshold up to the charmonium region, and of hadronic decays of charm and strange hadrons. It is based on a muon spectrometer, which includes a toroidal magnet and six planes of tracking detectors, coupled to a vertex spectrometer, equipped with Si MAPS immersed in a dipole field. High luminosity is an essential requirement for the experiment, with the goal of taking data with 10$^6$ incident ions/s, at collision energies ranging from $\sqrt{s_{\rm NN}} = 6.3$ GeV ($E_{\rm lab}= 20$ A GeV) to top SPS energy ($\sqrt{s_{\rm NN}} = 17.3$ GeV, $E_{\rm lab}= 158$ A GeV). This document presents the physics motivation, the foreseen experimental set-up including integration and radioprotection studies, the current detector choices together with the status of the corresponding R&D, and the outcome of physics performance studies. A preliminary cost evaluation is also carried out. △ Less

Submitted 29 December, 2022; originally announced December 2022.

Comments: Letter of Intent submitted to the CERN SPSC

Report number: CERN-SPSC-2022-036 / SPSC-I-259

ALICE upgrades for Run 4 and Run 5

Authors: A. Ferretti

Abstract: In view of Run 4 at the LHC, presently scheduled from 2029 onwards, ALICE is pursuing several upgrades to further extend its physics reach. In order to improve heavy-flavor hadron and dielectron measurements which rely on secondary vertexing, a reduction of the material budget of the innermost layers of the Inner Tracking System is needed. This can be achieved with bent pixel sensors, arranged in… ▽ More In view of Run 4 at the LHC, presently scheduled from 2029 onwards, ALICE is pursuing several upgrades to further extend its physics reach. In order to improve heavy-flavor hadron and dielectron measurements which rely on secondary vertexing, a reduction of the material budget of the innermost layers of the Inner Tracking System is needed. This can be achieved with bent pixel sensors, arranged in half-cylinder shapes with integrated power lines and data buses, allowing to get rid of most of the supporting structure and of the water cooling. Moreover, a new Forward Calorimeter (FoCal), covering pseudorapidities of $3.2<η<5.8$, has been proposed to measure small-x (down to $10^{-6}$) gluon distributions via prompt photon production. The FoCal will be composed of a highly granular Si+W electromagnetic calorimeter combined with a conventional sampling hadronic calorimeter, and will significantly enhance the scope of ALICE for inclusive and correlation measurements with mesons, photons, and jets. For Run 5 and beyond, the ALICE 3 project has been proposed. It consists of a novel compact detector based on monolithic silicon sensors, with ultra-thin layers near the vertex, high readout rate capabilities, superb pointing resolution, excellent tracking and particle identification over a large acceptance. Such a detector enables a rich physics program, ranging from electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector. For particle identification, a sequence of detector systems is foreseen: a combination of a Time-Of-Flight system, a Ring-Imaging Cherenkov detector, an electromagnetic calorimeter, a muon identifier, and a dedicated forward detector for ultra-soft photons. In these proceedings, the upgrade plans will be shown together with the status of R\&D on ITS3 and FoCal and with the concepts and requirements of ALICE 3. △ Less

Submitted 28 October, 2022; originally announced October 2022.

Comments: 4 pages, 3 figures. Proceedings of QCD22: 25th High-Energy Physics International Conference in Quantum ChromoDynamics, Montpellier (France), July 4-7, 2022

ExoClock Project III: 450 new exoplanet ephemerides from ground and space observations

Authors: A. Kokori, A. Tsiaras, B. Edwards, A. Jones, G. Pantelidou, G. Tinetti, L. Bewersdorff, A. Iliadou, Y. Jongen, G. Lekkas, A. Nastasi, E. Poultourtzidis, C. Sidiropoulos, F. Walter, A. Wünsche, R. Abraham, V. K. Agnihotri, R. Albanesi, E. Arce-Mansego, D. Arnot, M. Audejean, C. Aumasson, M. Bachschmidt, G. Baj, P. R. Barroy , et al. (192 additional authors not shown)

Abstract: The ExoClock project has been created with the aim of increasing the efficiency of the Ariel mission. It will achieve this by continuously monitoring and updating the ephemerides of Ariel candidates over an extended period, in order to produce a consistent catalogue of reliable and precise ephemerides. This work presents a homogenous catalogue of updated ephemerides for 450 planets, generated by t… ▽ More The ExoClock project has been created with the aim of increasing the efficiency of the Ariel mission. It will achieve this by continuously monitoring and updating the ephemerides of Ariel candidates over an extended period, in order to produce a consistent catalogue of reliable and precise ephemerides. This work presents a homogenous catalogue of updated ephemerides for 450 planets, generated by the integration of $\sim$18000 data points from multiple sources. These sources include observations from ground-based telescopes (ExoClock network and ETD), mid-time values from the literature and light-curves from space telescopes (Kepler/K2 and TESS). With all the above, we manage to collect observations for half of the post-discovery years (median), with data that have a median uncertainty less than one minute. In comparison with literature, the ephemerides generated by the project are more precise and less biased. More than 40\% of the initial literature ephemerides had to be updated to reach the goals of the project, as they were either of low precision or drifting. Moreover, the integrated approach of the project enables both the monitoring of the majority of the Ariel candidates (95\%), and also the identification of missing data. The dedicated ExoClock network effectively supports this task by contributing additional observations when a gap in the data is identified. These results highlight the need for continuous monitoring to increase the observing coverage of the candidate planets. Finally, the extended observing coverage of planets allows us to detect trends (TTVs - Transit Timing Variations) for a sample of 19 planets. All products, data, and codes used in this work are open and accessible to the wider scientific community. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: Recommended for publication to ApJS (reviewer's comments implemented). Main body: 13 pages, total: 77 pages, 7 figures, 7 tables. Data available at http://doi.org/10.17605/OSF.IO/P298N

Searching for an eco-friendly gas mixture for the ALICE Resistive Plate Chambers

Authors: Luca Quaglia, R. Cardarelli, B. Liberti, E. Pastori, G. Proto, G. Aielli, P. Camarri, A. Di Ciacco, L. Di Stante, R. Santonico, G. Alberghi, D. Boscherini, A. Bruni, L. Massa, A. Polini, M. Romano, L. Benussi, S. Bianco, L. Passamonti, D. Piccolo, D. Pierluigi, A. Russo M. Ferrini, G. Saviano, M. Abbrescia, L. Congedo , et al. (25 additional authors not shown)

Abstract: The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2… ▽ More The ALICE RPCs are operated with a mixture of 89.7% $C_{2}H_{2}F_{4}$, 10% i-$C_{4}H_{10}$ and 0.3% $SF_{6}$. $C_{2}H_{2}F_{4}$ and $SF_{6}$ are fluorinated greenhouse gases with a high Global Warming Potential (GWP). New European Union regulations have imposed a progressive phase-down of the production and usage of F-gases, aiming to cut down their emission by two thirds in 2030 with respect to 2014. Even though research activities are excluded from these regulations, the phase-down will inevitably increase their price and CERN is also aiming to cut down on its emissions. For these reasons it is crucial to find a more eco-friendly gas mixture for RPCs by the time of the LHC long shutdown 3, foreseen in 2026. Since $C_{2}H_{2}F_{4}$ is the main contributor to the mixture GWP, an extensive R&D process has started to replace it with tetrafluoropropene ($C_{3}H_{2}F_{4}$), due to its chemical similarity with $C_{2}H_{2}F_{4}$ and its low GWP (around 7). Preliminary tests with cosmic rays have shown promising results in terms of detector performance. The next step is to study the long-term behavior of RPCs operated with these new gas mixtures (aging studies). Since this is a subject of interest for all (and not only) the LHC experiments, a collaboration, ECOgas@GIF++, was setup to carry out joint studies. Among others, a small ALICE-like RPC was installed at the Gamma Irradiation Facility at CERN, where they are exposed to a strong radiation field, coming from a 12.5 TBq $^{137}$Cs source, which allows one to simulate many years of operation in a relatively short time. The facility also provides a muon beam at specific times of the year, which can be used to study the detector performance (e.g. efficiency and cluster size) during and after irradiation. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: Proceedings of the LHCp 2022 conference

Graphene decoupling through oxygen intercalation on Gr/Co and Gr/Co/Ir interfaces

Authors: Dario A. Leon, Andrea Ferretti, Daniele Varsano, Elisa Molinari, Claudia Cardoso

Abstract: We perform a density functional theory study of the effects of oxygen adsorption on the structural and electronic properties of Gr/Co(0001) and Gr/Co/Ir(111) interfaces. In both interfaces, the graphene-Co distance increases with increasing O concentration. The oxygen intercalation effectively decreases the electronic interaction, preventing the hybridization of graphene states with Co $d$-orbital… ▽ More We perform a density functional theory study of the effects of oxygen adsorption on the structural and electronic properties of Gr/Co(0001) and Gr/Co/Ir(111) interfaces. In both interfaces, the graphene-Co distance increases with increasing O concentration. The oxygen intercalation effectively decreases the electronic interaction, preventing the hybridization of graphene states with Co $d$-orbitals, hence (partly) restoring the typical Dirac cone of pristine graphene. In the case of graphene/Co 1ML/Ir(111), which presents a moiré pattern, the interplay between the O distribution and the continuous change of the graphene-Co registry can be used to tune graphene corrugation and electronic properties. The computed electronic properties are in very good agreement with previously reported angle resolved photoemission spectroscopy and photoemission electron microscopy measurements for Gr/Co(0001). △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 15 pages, 15 figures

Journal ref: Phys. Rev. Materials 6, 064004 (2022)

Efficient GW calculations in two dimensional materials through a stochastic integration of the screened potential

Authors: Alberto Guandalini, Pino D'Amico, Andrea Ferretti, Daniele Varsano

Abstract: Many-body perturbation theory methods, such as the $G_0W_0$ approximation, are able to accurately predict quasiparticle (QP) properties of several classes of materials. However, the calculation of the QP band structure of two-dimensional (2D) semiconductors is known to require a very dense BZ sampling, due to the sharp $q$-dependence of the dielectric matrix in the long-wavelength limit (… ▽ More Many-body perturbation theory methods, such as the $G_0W_0$ approximation, are able to accurately predict quasiparticle (QP) properties of several classes of materials. However, the calculation of the QP band structure of two-dimensional (2D) semiconductors is known to require a very dense BZ sampling, due to the sharp $q$-dependence of the dielectric matrix in the long-wavelength limit ($\mathbf{q} \to 0$). In this work, we show how the convergence of the QP corrections of 2D semiconductors with respect to the BZ sampling can be drastically improved, by combining a Monte Carlo integration with an interpolation scheme able to represent the screened potential between the calculated grid points. The method has been validated by computing the band gap of three different prototype monolayer materials: a transition metal dichalcogenide (MoS$_2$), a wide band gap insulator (hBN) and an anisotropic semiconductor (phosphorene). The proposed scheme shows that the convergence of the gap for these three materials up to 50meV is achieved by using $\k$-point grids comparable to those needed by DFT calculations, while keeping the grid uniform. △ Less

Submitted 22 June, 2022; v1 submitted 24 May, 2022; originally announced May 2022.

Excitonic effects in graphene-like C$_3$N

Authors: Miki Bonacci, Matteo Zanfrognini, Elisa Molinari, Alice Ruini, Marilia J. Caldas, Andrea Ferretti, Daniele Varsano

Abstract: Monolayer C$_3$N is an emerging two-dimensional indirect band gap semiconductor with interesting mechanical, thermal, and electronic properties. In this work we present a description of C$_3$N electronic and dielectric properties, focusing on the so-called momentum-resolved exciton band structure. Excitation energies and oscillator strengths are computed in order to characterize bright and dark st… ▽ More Monolayer C$_3$N is an emerging two-dimensional indirect band gap semiconductor with interesting mechanical, thermal, and electronic properties. In this work we present a description of C$_3$N electronic and dielectric properties, focusing on the so-called momentum-resolved exciton band structure. Excitation energies and oscillator strengths are computed in order to characterize bright and dark states, and discussed also with respect to the crystal symmetry. Activation of excitonic states is observed for finite transferred momenta: Indeed, we find an active indirect exciton at $\sim$ 0.9 eV, significantly lower than the direct optical gap of 1.96 eV, with excitonic binding energies in the range 0.6-0.9 eV for the lowest states. As for other 2D materials, we find a quasi-linear excitonic dispersion close to $Γ$, which however shows a downward convexity related to the indirect band gap of C$_3$N as well as to the dark nature of the involved excitons. △ Less

Submitted 23 April, 2022; originally announced April 2022.

Comments: 8 pages; 7 figures

Journal ref: Phys. Rev. Materials, 6, 3, 034009 (2022)

The ALICE Experiment Upgrades

Authors: A. Ferretti

Abstract: The ALICE experiment profited of the Long Shutdown during 2019-2021 in order to expand its physics capabilities and fully profit from the increased LHC luminosity in Run 3. The Inner Tracking System has been replaced with a new silicon tracker based on MAPS technology, and a new tracking device has been added in front of the Muon Spectrometer to improve its vertexing capabilities. The wire chamber… ▽ More The ALICE experiment profited of the Long Shutdown during 2019-2021 in order to expand its physics capabilities and fully profit from the increased LHC luminosity in Run 3. The Inner Tracking System has been replaced with a new silicon tracker based on MAPS technology, and a new tracking device has been added in front of the Muon Spectrometer to improve its vertexing capabilities. The wire chambers for TPC readout have been replaced with new GEM detectors which will minimize ion backflow and allow for continuous data taking: moreover, a new detector array dedicated to fast triggering has been installed. On the software side, a new first pass reconstruction was added in order to handle and reduce the data flow and storage. These upgrades will be presented together with an outlook of the future ALICE upgrades in view of the LHC Run 4, which will include the replacement of the ITS inner tracking layers with upgraded silicon devices and a high-granularity electromagnetic and hadronic calorimeter in the forward direction (FOCAL) △ Less

Submitted 21 January, 2022; originally announced January 2022.

Comments: 4 pages, 1 Figure. Proceedings of 32nd Rencontres de Blois conference, October 17-22, 2021

Studies on tetrafluoropropene-CO2 based gas mixtures for the Resistive Plate Chambers of the ALICE Muon IDentifier

Authors: Alessandro Ferretti

Abstract: Due to their simplicity and comparatively low cost Resistive Plate Chambers are gaseous detectors widely used in high-energy and cosmic rays physics when large detection areas are needed. However, the best gaseous mixtures are currently based on tetrafluoroethane, which has the undesirable characteristic of a large Global Warming Potential (GWP) of about 1400 and because of this, it is currently b… ▽ More Due to their simplicity and comparatively low cost Resistive Plate Chambers are gaseous detectors widely used in high-energy and cosmic rays physics when large detection areas are needed. However, the best gaseous mixtures are currently based on tetrafluoroethane, which has the undesirable characteristic of a large Global Warming Potential (GWP) of about 1400 and because of this, it is currently being phased out from industrial use. As a possible replacement, tetrafluoropropene (which has a GWP close to 1) has been taken into account. Since tetrafluoropropene is more electronegative than tetrafluoroethane, it has to be diluted with gases with a lower attachment coefficient in order to maintain the operating voltage close to 10 kV. One of the main candidates for this role is carbon dioxide. In order to ascertain the feasibility and the performance of tetrafluoropropene-CO2 based mixtures, an R&D program is being carried out in the ALICE collaboration, which employs an array of 72 Bakelite RPCs (Muon Identifier, MID) to identify muons. Different proportions of tetrafluoropropene and CO2, with the addition of small quantities of isobutane and sulphur hexafluoride, have been tested with 50x50 cm2 RPC prototypes with 2 mm wide gas gap and 2 mm thick Bakelite electrodes. In the presentation, results from tests with cosmic rays will be presented, together with data concerning the current drawn by a RPC exposed to the gamma-ray flux of the Gamma Irradiation Facility (GIF) at CERN. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Comments: 4 pages, 3 figures, proceeding of the 12th International Conference on Position Sensitive Detectors

Towards a Governance Framework for Brain Data

Authors: Marcello Ienca, Joseph J. Fins, Ralf J. Jox, Fabrice Jotterand, Silja Voeneky, Roberto Andorno, Tonio Ball, Claude Castelluccia, Ricardo Chavarriaga, Hervé Chneiweiss, Agata Ferretti, Orsolya Friedrich, Samia Hurst, Grischa Merkel, Fruzsina Molnar-Gabor, Jean-Marc Rickli, James Scheibner, Effy Vayena, Rafael Yuste, Philipp Kellmeyer

Abstract: The increasing availability of brain data within and outside the biomedical field, combined with the application of artificial intelligence (AI) to brain data analysis, poses a challenge for ethics and governance. We identify distinctive ethical implications of brain data acquisition and processing, and outline a multi-level governance framework. This framework is aimed at maximizing the benefits… ▽ More The increasing availability of brain data within and outside the biomedical field, combined with the application of artificial intelligence (AI) to brain data analysis, poses a challenge for ethics and governance. We identify distinctive ethical implications of brain data acquisition and processing, and outline a multi-level governance framework. This framework is aimed at maximizing the benefits of facilitated brain data collection and further processing for science and medicine whilst minimizing risks and preventing harmful use. The framework consists of four primary areas of regulatory intervention: binding regulation, ethics and soft law, responsible innovation, and human rights. △ Less

Submitted 28 September, 2021; v1 submitted 24 September, 2021; originally announced September 2021.

A unified Green's function approach for spectral and thermodynamic properties from algorithmic inversion of dynamical potentials

Authors: Tommaso Chiarotti, Nicola Marzari, Andrea Ferretti

Abstract: Dynamical potentials appear in many advanced electronic-structure methods, including self-energies from many-body perturbation theory, dynamical mean-field theory, electronic-transport formulations, and many embedding approaches. Here, we propose a novel treatment for the frequency dependence, introducing an algorithmic inversion method that can be applied to dynamical potentials expanded as sum o… ▽ More Dynamical potentials appear in many advanced electronic-structure methods, including self-energies from many-body perturbation theory, dynamical mean-field theory, electronic-transport formulations, and many embedding approaches. Here, we propose a novel treatment for the frequency dependence, introducing an algorithmic inversion method that can be applied to dynamical potentials expanded as sum over poles. This approach allows for an exact solution of Dyson-like equations at all frequencies via a mapping to a matrix diagonalization, and provides simultaneously frequency-dependent (spectral) and frequency-integrated (thermodynamic) properties of the Dyson-inverted propagators. The transformation to a sum over poles is performed introducing $n$-th order generalized Lorentzians as an improved basis set to represent the spectral function of a propagator, and using analytic expressions to recover the sum-over-poles form. Numerical results for the homogeneous electron gas at the $G_0W_0$ level are provided to argue for the accuracy and efficiency of such unified approach. △ Less

Submitted 16 September, 2021; originally announced September 2021.

Comments: Main: 16 pages, 11 figures. Supplemental Material: 4 pages, 10 figures

Frequency dependence in GW made simple using a multi-pole approximation

Authors: Dario A. Leon, Claudia Cardoso, Tommaso Chiarotti, Daniele Varsano, Elisa Molinari, Andrea Ferretti

Abstract: In the $GW$ approximation, the screened interaction $W$ is a non-local and dynamical potential that usually has a complex frequency dependence. A full description of such dependence is possible but often computationally demanding. For this reason, it is still common practice to approximate $W(ω)$ using a plasmon pole (PP) model. Such approach, however, may deliver an accuracy limited by its simpli… ▽ More In the $GW$ approximation, the screened interaction $W$ is a non-local and dynamical potential that usually has a complex frequency dependence. A full description of such dependence is possible but often computationally demanding. For this reason, it is still common practice to approximate $W(ω)$ using a plasmon pole (PP) model. Such approach, however, may deliver an accuracy limited by its simplistic description of the frequency dependence of the polarizability, i.e. of $W$. In this work we explore a multi-pole approach (MPA) and develop an effective representation of the frequency dependence of $W$. We show that an appropriate sampling of the polarizability in the frequency complex plane and a multi-pole interpolation can lead to a level of accuracy comparable with full-frequency methods at much lower computational cost. Moreover, both accuracy and cost are controllable by the number of poles used in MPA. Eventually we validate the MPA approach in selected prototype systems, showing that full-frequency quality results can be obtained with a limited number of poles. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: 7 figures, 18 pages + 2 supplementary pages

Journal ref: Phys. Rev. B 104, 115157 (2021)

School reopening should be guided by solid evidence and mitigation measures against Covid-19

Authors: R. Battiston, F. Carinci, A. Ferretti, R. Iuppa, G. Lattanzi, D. Menasce, S. Merler, M. Mezzetto, R. Potestio, G. Salina, C. Spinella, S. Tonini, L. Tubiana, Y. Velegrakis, R. De Vogli

Abstract: The debate on the role of school closures as a mitigation strategy against the spread of Covid-19 is gaining relevance due to emerging variants in Europe. According to WHO, decisions on schools "should be guided by a risk-based approach". However, risk evaluation requires sound methods, transparent data and careful consideration of the context at the local level. We review a recent study by Gandin… ▽ More The debate on the role of school closures as a mitigation strategy against the spread of Covid-19 is gaining relevance due to emerging variants in Europe. According to WHO, decisions on schools "should be guided by a risk-based approach". However, risk evaluation requires sound methods, transparent data and careful consideration of the context at the local level. We review a recent study by Gandini et al., on the role of school opening as a driver of the second COVID-19 wave in Italy, which concluded that there was no connection between school openings/closures and SARS-CoV-2 incidence. infections. This analysis has been widely commented in Italian media as conclusive proof that "schools are safe". However the study presents severe oversights and careless interpretation of data. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Comments: 2 pages, 3 figures

Quantum ESPRESSO toward the exascale

Authors: Paolo Giannozzi, Oscar Baseggio, Pietro Bonfà, Davide Brunato, Roberto Car, Ivan Carnimeo, Carlo Cavazzoni, Stefano de Gironcoli, Pietro Delugas, Fabrizio Ferrari Ruffino, Andrea Ferretti, Nicola Marzari, Iurii Timrov, Andrea Urru, Stefano Baroni

Abstract: Quantum ESPRESSO is an open-source distribution of computer codes for quantum-mechanical materials modeling, based on density-functional theory, pseudopotentials, and plane waves, and renowned for its performance on a wide range of hardware architectures, from laptops to massively parallel computers, as well as for the breadth of its applications. In this paper we present a motivation and brief re… ▽ More Quantum ESPRESSO is an open-source distribution of computer codes for quantum-mechanical materials modeling, based on density-functional theory, pseudopotentials, and plane waves, and renowned for its performance on a wide range of hardware architectures, from laptops to massively parallel computers, as well as for the breadth of its applications. In this paper we present a motivation and brief review of the ongoing effort to port Quantum ESPRESSO onto heterogeneous architectures based on hardware accelerators, which will overcome the energy constraints that are currently hindering the way towards exascale computing. △ Less

Submitted 22 April, 2021; v1 submitted 21 April, 2021; originally announced April 2021.

Journal ref: J. Chem. Phys. 152, 154105 (2020)

Narrowing of d bands of FeCo layers intercalated under graphene

Authors: Daniela Pacilè, Claudia Cardoso, Giulia Avvisati, Ivana Vobornik, Carlo Mariani, Dario A. Leon, Pietro Bonfà, Daniele Varsano, Andrea Ferretti, Maria Grazia Betti

Abstract: We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphe… ▽ More We report on the electronic properties of an artificial system obtained by the intercalation of equiatomic FeCo layers under graphene grown on Ir(111). Upon intercalation, the FeCo film grows epitaxially on Ir(111), resulting in a lattice-mismatched system. By performing Density Functional Theory calculations, we show that the intercalated FeCo layer leads to a pronounced corrugation of the graphene film. At the same time, the FeCo intercalated layers induce a clear transition from a nearly undisturbed to a strongly hybridized graphene π-band, as measured by angle-resolved photoemission spectroscopy. A comparison of experimental results with the computed band structure and the projected density of states unveils a spin-selective hybridization between the π band of graphene and FeCo-3d states. Our results demonstrate that the reduced dimensionality, as well as the hybridization within the FeCo layers, induce a narrowing and a clear splitting of Fe 3d-up and Fe 3d-down spin bands of the confined FeCo layers with respect to bulk Fe and Co. △ Less

Submitted 29 March, 2021; originally announced March 2021.

Comments: 5 pages, 4 figures

Journal ref: Appl. Phys. Lett. 118, 121602, 2021

Electron Collision Cross Sections in Tetrafluoropropene HFO1234ze(E) for Gas Mixtures in Resistive Plate Chambers

Authors: Antonio Bianchi, Alessandro Ferretti, Martino Gagliardi, Ermanno Vercellin

Abstract: In recent years, there has been growing interest in tetrafluoropropene HFO1234ze(E) (C$_{3}$H$_{2}$F$_{4}$) for Resistive Plate Chambers (RPCs). This novel gas is considered a promising alternative to the standard mixtures currently used in RPCs, thanks to its low global warming potential. The knowledge of electron collision cross sections in C$_{3}$H$_{2}$F$_{4}$ enables reliable predictions of e… ▽ More In recent years, there has been growing interest in tetrafluoropropene HFO1234ze(E) (C$_{3}$H$_{2}$F$_{4}$) for Resistive Plate Chambers (RPCs). This novel gas is considered a promising alternative to the standard mixtures currently used in RPCs, thanks to its low global warming potential. The knowledge of electron collision cross sections in C$_{3}$H$_{2}$F$_{4}$ enables reliable predictions of electron transport coefficients and reaction rates in C$_{3}$H$_{2}$F$_{4}$-based gas mixtures. This allows for optimizing the C$_{3}$H$_{2}$F$_{4}$-based gas mixtures to achieve the desired performance in RPCs. From measurements of electron transport coefficients and reaction rates, a complete set of scattering cross sections for electrons in C$_{3}$H$_{2}$F$_{4}$ has been derived. Validation of the electron collision cross sections is achieved through systematic comparisons of electron swarm parameters with experimental data in both pure C$_{3}$H$_{2}$F$_{4}$ and C$_{3}$H$_{2}$F$_{4}$/CO$_{2}$ gas mixtures. Given the influence of electron attachment in C$_{3}$H$_{2}$F$_{4}$ by the gas density, this work also includes precise calculations of the critical electric field strength in such mixtures. This set of cross sections has been further utilized to compute the effective ionization Townsend coefficient in gas mixtures containing C$_{3}$H$_{2}$F$_{4}$, potentially applicable for RPCs. △ Less

Submitted 9 March, 2024; v1 submitted 15 March, 2021; originally announced March 2021.

Comments: Added section "Tetrafluoropropene-based Gas Mixtures for Resistive Plate Chambers"

Magnetic response and electronic states of well defined Graphene/Fe/Ir(111) heterostructure

Authors: Claudia Cardoso, Giulia Avvisati, Pierluigi Gargiani, Marco Sbroscia, Madan S. Jagadeesh, Carlo Mariani, Dario A. Leon, Daniele Varsano, Andrea Ferretti, Maria Grazia Betti

Abstract: We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr ban… ▽ More We investigate a well defined heterostructure constituted by magnetic Fe layers sandwiched between graphene (Gr) and Ir(111). The challenging task to avoid Fe-C solubility and Fe-Ir intermixing has been achieved with atomic controlled Fe intercalation at moderate temperature below 500 K. Upon intercalation of a single ordered Fe layer in registry with the Ir substrate, an intermixing of the Gr bands and Fe d states breaks the symmetry of the Dirac cone, with a downshift in energy of the apex by about 3 eV, and well-localized Fe intermixed states induced in the energy region just below the Fermi level. First principles electronic structure calculations show a large spin splitting of the Fe states, resulting in a majority spin channel almost fully occupied and strongly hybridized with Gr π states. X-ray magnetic circular dichroism on the Gr/Fe/Ir heterostructure reveals an ordered spin configuration with a ferromagnetic response of Fe layer(s), with enhanced spin and orbital configurations with respect to the bcc-Fe bulk values. The magnetization switches from a perpendicular easy magnetization axis when the Fe single layer is lattice matched with the Ir(111) surface to a parallel one when the Fe thin film is almost commensurate with graphene. △ Less

Submitted 14 January, 2021; originally announced January 2021.

Journal ref: Physical Review Materials 5, 014405 (2021)

Nuclear dependence of light neutral meson production in p-A collisions at 400 GeV with NA60

Authors: R. Arnaldi, K. Banicz, K. Borer, J. Castor, B. Chaurand, W. Chen, C. Cicalò, A. Colla, P. Cortese, S. Damjanovic, A. David, A. De Falco, A. Devaux, L. Ducroux, H. En'yo, J. Fargeix, A. Ferretti, M. Floris, A. Förster, P. Force, N. Guettet, A. Guichard, H. Gulkanian, J. M. Heuser, P. Jarron , et al. (29 additional authors not shown)

Abstract: The NA60 experiment has studied low-mass muon pair production in proton-nucleus collisions with a system of Be, Cu, In, W, Pb and U targets, using a 400 GeV proton beam at the CERN SPS. The transverse momentum spectra of the $ρ/ω$ and $φ$ mesons are measured in the full $p_\mathrm{T}$ range accessible, from $p_\mathrm{T} = 0$ up to 2 GeV/$c$. The nuclear dependence of the production cross sections… ▽ More The NA60 experiment has studied low-mass muon pair production in proton-nucleus collisions with a system of Be, Cu, In, W, Pb and U targets, using a 400 GeV proton beam at the CERN SPS. The transverse momentum spectra of the $ρ/ω$ and $φ$ mesons are measured in the full $p_\mathrm{T}$ range accessible, from $p_\mathrm{T} = 0$ up to 2 GeV/$c$. The nuclear dependence of the production cross sections of the $η$, $ω$ and $φ$ mesons has been found to be consistent with the power law $σ_\mathrm{pA} \propto \mathrm{A}^α$, with the $α$ parameter increasing as a function of $p_\mathrm{T}$ for all the particles, and an approximate hierarchy $α_η\approx α_φ> α_ω$. The cross section ratios $σ_η/σ_ω$, $σ_ρ/σ_ω$ and $σ_φ/σ_ω$ have been studied as a function of the size A of the production target, and an increase of the $η$ and $φ$ yields relative to the $ω$ is observed from p-Be to p-U collisions. △ Less

Submitted 28 December, 2020; originally announced December 2020.

Journal ref: Eur.Phys.J.C 79 (2019) 5, 443

Detection & imaging with Leak Microstructures

Authors: M. Lombardi, G. Balbinot, A. Battistella, P. Colautti, V. Conte, L. De Nardo, G. Galeazzi, G. Prete, A. Ferretti

Abstract: Results obtained with a new very compact detector for imaging with a matrix of Leak Microstructures (LM)are reported. Spatial linearity and spatial resolution obtained by scanning as well as the detection of alpha particles with 100% efficiency, when compared with a silicon detector, are stressed. Preliminary results recently obtained in detecting single electrons emitted by heated filament (Ec <… ▽ More Results obtained with a new very compact detector for imaging with a matrix of Leak Microstructures (LM)are reported. Spatial linearity and spatial resolution obtained by scanning as well as the detection of alpha particles with 100% efficiency, when compared with a silicon detector, are stressed. Preliminary results recently obtained in detecting single electrons emitted by heated filament (Ec < 1 eV) at 1-3 mbar of propane are reported. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Comments: 5 pages, 11 figures

Environment-friendly gas mixtures for Resistive Plate Chambers: an experimental and simulation study

Authors: A. Bianchi, S. Delsanto, P. Dupieux, A. Ferretti, M. Gagliardi, B. Joly, S. P. Manen, M. Marchisone, L. Micheletti, L. Quaglia, A. Rosano, L. Terlizzi, E. Vercellin

Abstract: Resistive Plate Chambers (RPC) have shown stable operation at the Large Hadron Collider and satisfactory efficiency for the entire Run 1 (2010-2013) and Run 2 (2015-2018) with C$_{2}$H$_{2}$F$_{4}$-based gas mixtures and the addition of SF$_{6}$ and i-C$_{4}$H$_{10}$. Since its global warming potential (GWP) is high, C$_{2}$H$_{2}$F$_{4}$ is phasing out of production due to recent European Union r… ▽ More Resistive Plate Chambers (RPC) have shown stable operation at the Large Hadron Collider and satisfactory efficiency for the entire Run 1 (2010-2013) and Run 2 (2015-2018) with C$_{2}$H$_{2}$F$_{4}$-based gas mixtures and the addition of SF$_{6}$ and i-C$_{4}$H$_{10}$. Since its global warming potential (GWP) is high, C$_{2}$H$_{2}$F$_{4}$ is phasing out of production due to recent European Union regulations and as a result its cost is progressively increasing. Therefore, finding a new RPC gas mixture with a low GWP has become extremely important. This contribution describes the simulation of the RPC efficiency with tetrafluoropropene C$_{3}$H$_{2}$F$_{4}$ (HFO1234ze), a hydrofluoroolefin with very low GWP. Simulation results are systematically compared with measurements of RPC efficiency in C$_{3}$H$_{2}$F$_{4}$-based gas mixtures with the addition of different combinations of Ar, He, CO$_{2}$, O$_{2}$ and i-C$_{4}$H$_{10}$ in various concentrations. This simulation allows the study of the interplay between C$_{3}$H$_{2}$F$_{4}$ and the other gas components in the mixture as well as may allow the identification of the most promising environment-friendly gas mixtures with C$_{3}$H$_{2}$F$_{4}$ for RPCs. △ Less

Submitted 4 May, 2020; originally announced May 2020.

Comments: 15th Workshop on Resistive Plate Chambers and Related Detectors (RPC 2020)

Performance and aging studies for the ALICE muon RPCs

Authors: Luca Quaglia, Antonio Bianchi, Alessandro Ferretti, Martino Gagliardi, Diego Stocco, Roberto Guida, Beatrice Mandelli, Laura Alvigini

Abstract: The ALICE muon trigger (MTR) system consists of 72 Resistive Plate Chamber (RPC) detectors arranged in two stations, each composed of two planes with 18 RPCs per plane. The detectors are operated in maxi-avalanche mode using a mixture of 89.7% C$_2$H$_2$F$_4$, 10% i-C$_4$H$_{10}$ and 0.3% SF$_6$. A number of detector performance indicators, such as efficiency and dark current, have been monitored… ▽ More The ALICE muon trigger (MTR) system consists of 72 Resistive Plate Chamber (RPC) detectors arranged in two stations, each composed of two planes with 18 RPCs per plane. The detectors are operated in maxi-avalanche mode using a mixture of 89.7% C$_2$H$_2$F$_4$, 10% i-C$_4$H$_{10}$ and 0.3% SF$_6$. A number of detector performance indicators, such as efficiency and dark current, have been monitored over time throughout the LHC Run2 (2015-18). While the efficiency showed very good stability, a steady increase in the absorbed dark current was observed. Since the end of 2018, the LHC has entered a phase of long shutdown, during which the ALICE experiment will be upgraded to cope with the next phase of data taking, expected in 2021. The MTR is undergoing a major upgrade of the front-end and readout electronics, and will change its functionalities, becoming a Muon Identifier. Only the replacement of the most irradiated RPCs is planned during the upgrade. It is therefore important to perform dedicated studies to gain further insights into the status of the detector. In particular, two RPCs were flushed with pure Ar gas for a prolonged period of time and a plasma was created by fully ionizing the gas. The output gas was analyzed using a Gas Chromatograph combined with a Mass Spectrometer and the possible presence of fluorinated compounds originating from the interaction of the plasma with the inner surfaces of the detector has been assessed using an Ion-Selective Electrode station. This contribution will include a detailed review of the ALICE muon RPC performance at the LHC. The procedure and results of the argon plasma test, described above, are also discussed. △ Less

Submitted 28 January, 2021; v1 submitted 1 May, 2020; originally announced May 2020.

Comments: Proceedings of the 15th Workshop on Resistive Plate Chambers and Related Detectors (RPC2020), 10-14 February 2020, University of Roma Tor Vergata, Italy

Studies on tetrafluoropropene-based gas mixtures with low environmental impact for Resistive Plate Chambers

Authors: A. Bianchi, S. Delsanto, P. Dupieux, A. Ferretti, M. Gagliardi, B. Joly, S. P. Manen, M. Marchisone, L. Micheletti, A. Rosano, E. Vercellin

Abstract: Gaseous detectors are widely used in high-energy physics experiments, and in particular at the CERN Large Hadron Collider (LHC), to provide tracking and triggering over large volumes. It has been recently estimated that Resistive Plate Chambers (RPC), used for muon detection, have the highest contribution on the overall greenhouse gas (GHG) emissions at the LHC experiments. Gas mixtures for RPCs… ▽ More Gaseous detectors are widely used in high-energy physics experiments, and in particular at the CERN Large Hadron Collider (LHC), to provide tracking and triggering over large volumes. It has been recently estimated that Resistive Plate Chambers (RPC), used for muon detection, have the highest contribution on the overall greenhouse gas (GHG) emissions at the LHC experiments. Gas mixtures for RPCs are mainly made of C$_{2}$H$_{2}$F$_{4}$, which is a greenhouse gas with a high environmental impact in the atmosphere. C$_{2}$H$_{2}$F$_{4}$ is already phasing out of production, due to recent European Union (EU) regulations, and its cost is expected to increase in the near future. Therefore, finding alternative gas mixtures made of gas components with a low Global Warming Potential (GWP) has become extremely important for limiting the GHG emissions as well as for economic reasons. The novel hydrofluoroolefins are likely appropriate candidates to replace C$_{2}$H$_{2}$F$_{4}$ due to their similar chemical structures. This study is focused on the characterization of innovative gas mixtures with tetrafluoropropene HFO1234ze(E) (C$_{3}$H$_{2}$F$_{4}$) that is one of the most eco-friendly hydrofluoroolefins, thanks to its very low GWP. HFO1234ze(E)-based gas mixtures with the addition of Ar, N$_{2}$, O$_{2}$ and CO$_{2}$ are extensively discussed in this paper as well as the role of i-C$_{4}$H$_{10}$ and SF$_{6}$ in such mixtures. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 15th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD19)

Intrinsic edge excitons in two-dimensional MoS$_2$

Authors: Pino D'Amico, Marco Gibertini, Deborah Prezzi, Daniele Varsano, Andrea Ferretti, Nicola Marzari, Elisa Molinari

Abstract: Using accurate first-principles calculations based on many-body perturbation theory we predict that two-dimensional MoS$_2$ hosts edge excitons with universal character, intrinsic to the existence of edges and lying well below the onset of bulk features. These excitons are largely insensitive to edge terminations or orientation, persisting even in the presence of metallic screening at zigzag edges… ▽ More Using accurate first-principles calculations based on many-body perturbation theory we predict that two-dimensional MoS$_2$ hosts edge excitons with universal character, intrinsic to the existence of edges and lying well below the onset of bulk features. These excitons are largely insensitive to edge terminations or orientation, persisting even in the presence of metallic screening at zigzag edges, with large binding energies of $\sim$0.4 eV. Additional excitons can also emerge in ultranarrow ribbons, or as a function of the chemical nature of the termination. The chemical, structural, and electronic similarities with Se- or W-based transition-metal dichalcogenides suggest that these optical features could be common in this class of materials. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Comments: 7 pages main text, 5 pages supplemental material, 12 figures

Journal ref: Phys. Rev. B 101, 161410 (2020)

Characterization of tetrafluoropropene-based gas mixtures for the Resistive Plate Chambers of the ALICE muon spectrometer

Authors: A. Bianchi, S. Delsanto, P. Dupieux, A. Ferretti, M. Gagliardi, B. Joly, S. P. Manen, M. Marchisone, L. Micheletti, A. Rosano, E. Vercellin

Abstract: The muon identification system of the ALICE experiment at the CERN LHC is based on Resistive Plate Chamber (RPC) detectors. These RPCs are operated in the so-called maxi-avalanche mode with a gas mixture made of tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), sulfur hexafluoride (SF$_{6}$) and isobutane (i-C$_{4}$H$_{10}$). All of these components are greenhouse gases: in particular, the first two gase… ▽ More The muon identification system of the ALICE experiment at the CERN LHC is based on Resistive Plate Chamber (RPC) detectors. These RPCs are operated in the so-called maxi-avalanche mode with a gas mixture made of tetrafluoroethane (C$_{2}$H$_{2}$F$_{4}$), sulfur hexafluoride (SF$_{6}$) and isobutane (i-C$_{4}$H$_{10}$). All of these components are greenhouse gases: in particular, the first two gases are already phasing out of production, due to recent European Union regulations, and their cost is progressively increasing. Therefore, finding a new eco-friendly gas mixture has become extremely important in order to reduce the impact of the RPC operation on the environment, and for economic reasons. Due to the similar chemical structure, hydrofluoroolefins appear appropriate candidates to replace C$_{2}$H$_{2}$F$_{4}$ thanks to their very low GWPs, especially tetrafluoropropene (C$_{3}$H$_{2}$F$_{4}$) with the trade name HFO1234ze. In order to identify an eco-friendly gas mixture fulfilling the requirements for operation in the ALICE environment in the coming years, a dedicated experimental set-up has been built to carry out R&D studies on promising gas mixtures. Measurements have been performed with a small-size RPC equipped with the front-end electronics, providing signal amplification, developed for ALICE operation at high luminosity after the LHC Long Shutdown 2. HFO1234ze-based mixtures with the addition of CO$_{2}$ are discussed in this paper as well as the role of i-C$_{4}$H$_{10}$ and SF$_{6}$ as quenchers in such mixtures. △ Less

Submitted 7 July, 2019; originally announced July 2019.

Reproducibility in $G_0W_0$ Calculations for Solids

Authors: Tonatiuh Rangel, Mauro Del Ben, Daniele Varsano, Gabriel Antonius, Fabien Bruneval, Felipe H. da Jornada, Michiel J. van Setten, Okan K. Orhan, David D. O'Regan, Andrew Canning, Andrea Ferretti, Andrea Marini, Gian-Marco Rignanese, Jack Deslippe, Steven G. Louie, Jeffrey B. Neaton

Abstract: Ab initio many-body perturbation theory within the $GW$ approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn-Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange correlation functional ``starting point'', are used to construct $G$ a… ▽ More Ab initio many-body perturbation theory within the $GW$ approximation is a Green's function formalism widely used in the calculation of quasiparticle excitation energies of solids. In what has become an increasingly standard approach, Kohn-Sham eigenenergies, generated from a DFT calculation with a strategically-chosen exchange correlation functional ``starting point'', are used to construct $G$ and $W$, and then perturbatively corrected by the resultant $GW$ self-energy. In practice, there are several ways to construct the $GW$ self-energy, and these can lead to variations in predicted quasiparticle energies. For example, for ZnO and TiO$_2$, reported $GW$ fundamental gaps can vary by more than 1 eV. In this work, we address the convergence and key approximations in contemporary $G_0W_0$ calculations, including frequency-integration schemes and the treatment of the Coulomb divergence in the exact-exchange term. We study several systems,and compare three different $GW$ codes: BerkeleyGW, Abinit and Yambo. We demonstrate, for the first time, that the same quasiparticle energies for systems in the condensed phase can be obtained with different codes, and we provide a comprehensive assessment of implementations of the $GW$ approximation. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Journal ref: Comput. Phys. Commun. 255, 107242 (2020)

Many-body perturbation theory calculations using the yambo code

Authors: D. Sangalli, A. Ferretti, H. Miranda, C. Attaccalite, I. Marri, E. Cannuccia, P. Melo, M. Marsili, F. Paleari, A. Marrazzo, G. Prandini, P. Bonfà, M. O. Atambo, F. Affinito, M. Palummo, A. Molina-Sánchez, C. Hogan, M. Grüning, D. Varsano, A. Marini

Abstract: yambo is an open source project aimed at studying excited state properties of condensed matter systems from first principles using many-body methods. As input, yambo requires ground state electronic structure data as computed by density functional theory codes such as quantum-espresso and abinit. yambo's capabilities include the calculation of linear response quantities (both independent-particle… ▽ More yambo is an open source project aimed at studying excited state properties of condensed matter systems from first principles using many-body methods. As input, yambo requires ground state electronic structure data as computed by density functional theory codes such as quantum-espresso and abinit. yambo's capabilities include the calculation of linear response quantities (both independent-particle and including electron-hole interactions), quasi-particle corrections based on the GW formalism, optical absorption, and other spectroscopic quantities. Here we describe recent developments ranging from the inclusion of important but oft-neglected physical effects such as electron-phonon interactions to the implementation of a real-time propagation scheme for simulating linear and non-linear optical properties. Improvements to numerical algorithms and the user interface are outlined. Particular emphasis is given to the new and efficient parallel structure that makes it possible to exploit modern high performance computing architectures. Finally, we demonstrate the possibility to automate workflows by interfacing with the yambopy and AiiDA software tools. △ Less

Submitted 7 June, 2019; v1 submitted 11 February, 2019; originally announced February 2019.

Journal ref: Journal of Physics: Condensed Matter, Volume 31, Number 32 (2019)

Study of hard and electromagnetic processes at CERN-SPS energies: an investigation of the high-$μ_{\mathbf{B}}$ region of the QCD phase diagram with NA60+

Authors: M. Agnello, F. Antinori, H. Appelshäuser, R. Arnaldi, R. Bailhache, L. Barioglio, S. Beole, A. Beraudo, A. Bianchi, L. Bianchi, E. Bruna, S. Bufalino, E. Casula, F. Catalano, S. Chattopadhyay, A. Chauvin, C. Cicalo, M. Concas, P. Cortese, T. Dahms, A. Dainese, A. Das, D. Das, D. Das, I. Das , et al. (47 additional authors not shown)

Abstract: The exploration of the phase diagram of Quantum ChromoDynamics (QCD) is carried out by studying ultrarelativistic heavy-ion collisions. The energy range covered by the CERN SPS ($\sqrt{s_{\rm \scriptscriptstyle{NN}}} \sim$ 6-17 GeV) is ideal for the investigation of the region of the phase diagram corresponding to finite baryochemical potential ($μ_{\rm B}$), and has been little explored up to now… ▽ More The exploration of the phase diagram of Quantum ChromoDynamics (QCD) is carried out by studying ultrarelativistic heavy-ion collisions. The energy range covered by the CERN SPS ($\sqrt{s_{\rm \scriptscriptstyle{NN}}} \sim$ 6-17 GeV) is ideal for the investigation of the region of the phase diagram corresponding to finite baryochemical potential ($μ_{\rm B}$), and has been little explored up to now. We propose in this document a new experiment, NA60+, that would address several observables which are fundamental for the understanding of the phase transition from hadronic matter towards a Quark-Gluon Plasma (QGP) at SPS energies. In particular, we propose to study, as a function of the collision energy, the production of thermal dimuons from the created system, from which one would obtain a caloric curve of the QCD phase diagram that is sensitive to the order of the phase transition. In addition, the measurement of a $ρ$-a$_1$ mixing contribution would provide conclusive insights into the restoration of the chiral symmetry of QCD. In parallel, studies of heavy quark and quarkonium production would also be carried out, addressing the measurement of transport properties of the QGP and the investigation of the onset of the deconfinement transition. The document also defines an experimental set-up which couples a vertex telescope based on monolithic active pixel sensors (MAPS) to a muon spectrometer with tracking (GEM) and triggering (RPC) detectors within a large acceptance toroidal magnet. Results of physics performance studies for most observables accessible to NA60+ are discussed, showing that the results of the experiment would lead to a significant advance of our understanding of strong interaction physics. The document has been submitted as an input to the European Particle Physics Strategy Update 2018-2020 (http://europeanstrategyupdate.web.cern.ch/). △ Less

Submitted 19 December, 2018; originally announced December 2018.

Comments: 14 pages, 9 figures, submitted as an input to the European Particle Physics Strategy Update 2018-2020

Electronic and optical properties of doped TiO2 by many-body perturbation theory

Authors: Michael O. Atambo, Daniele Varsano, Andrea Ferretti, S. Samaneh Ataei, Marilia J. Caldas, Elisa Molinari, Annabella Selloni

Abstract: Doping is one of the most common strategies for improving the photocatalytic and solar energy conversion properties of TiO$_2$, hence an accurate theoretical description of the electronic and optical properties of doped TiO$_2$ is of both scientific and practical interest. In this work we use many-body perturbation theory techniques to investigate two typical n-type dopants, Niobium and Hydrogen,… ▽ More Doping is one of the most common strategies for improving the photocatalytic and solar energy conversion properties of TiO$_2$, hence an accurate theoretical description of the electronic and optical properties of doped TiO$_2$ is of both scientific and practical interest. In this work we use many-body perturbation theory techniques to investigate two typical n-type dopants, Niobium and Hydrogen, in TiO$_2$ rutile. Using the GW approximation to determine band edges and defect energy levels, and the Bethe Salpeter equation for the calculation of the absorption spectra, we find that the defect energy levels form non-dispersive bands %associated with localized states lying $\simeq 2.2 eV$ above the top of the corresponding valence bands ($\simeq 0.9 eV$ below the conduction bands of the {\it pristine} material). The defect states are also responsible for the appearance of low energy absorption peaks that enhance the solar spectrum absorption of rutile. The spatial distributions of the excitonic wavefunctions associated with these low energy excitations are very different for the two dopants, suggesting a larger mobility of photoexcited electrons in Nb-TiO$_2$. △ Less

Submitted 16 October, 2019; v1 submitted 10 November, 2018; originally announced November 2018.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. Materials 3, 045401 (2019)

Ferromagnetic and Antiferromagnetic Coupling of Spin Molecular Interfaces with High Thermal Stability

Authors: Giulia Avvisati, Claudia Cardoso, Daniele Varsano, Andrea Ferretti, Pierluigi Gargiani, Maria Grazia Betti

Abstract: We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferrom… ▽ More We report an advanced organic spin-interface architecture with magnetic remanence at room temperature, constituted by metal phthalocyanine molecules magnetically coupled with Co layer(s), mediated by graphene. Fe- and Cu-phthalocyanines assembled on graphene/Co have identical structural configurations, but FePc couples antiferromagnetically with Co up to room temperature, while CuPc couples ferromagnetically with weaker coupling and thermal stability, as deduced by element-selective X-ray magnetic circular dichroic signals. The robust antiferromagnetic coupling is stabilized by a superexchange interaction, driven by the out-of-plane molecular orbitals responsible of the magnetic ground state and electronically decoupled from the underlying metal via the graphene layer, as confirmed by ab initio theoretical predictions. These archetypal spin interfaces can be prototypes to demonstrate how antiferromagnetic and/or ferromagnetic coupling can be optimized by selecting the molecular orbital symmetry. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Nano. Lett. copyright American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.nanolett.7b04836

Journal ref: Nano Lett., 2018, 18 (4), pp 2268

Koopmans-compliant functionals and potentials and their application to the GW100 test-set

Authors: Nicola Colonna, Ngoch Linh Nguyen, Andrea Ferretti, Nicola Marzari

Abstract: Koopmans-compliant (KC) functionals have been shown to provide accurate spectral properties through a generalized condition of piece-wise linearity of the total energy as a function of the fractional addition/removal of an electron to/from any orbital. We analyze the performance of different KC functionals on the GW100 test-set, comparing the ionization potentials (as opposite of the energy of the… ▽ More Koopmans-compliant (KC) functionals have been shown to provide accurate spectral properties through a generalized condition of piece-wise linearity of the total energy as a function of the fractional addition/removal of an electron to/from any orbital. We analyze the performance of different KC functionals on the GW100 test-set, comparing the ionization potentials (as opposite of the energy of the highest occupied orbital) of these 100 molecules to those obtained from CCSD(T) total energy differences, and experimental results, finding excellent agreement with a mean absolute error of 0.20 eV for the KIPZ functional, that is state-of-the-art for both DFT-based calculations and many-body perturbation theory. We highlight similarities and differences between KC functionals and other electronic-structure approaches, such as dielectric-dependent hybrid functionals and G$_0$W$_0$, both from a theoretical and from a practical point of view, arguing that Koopmans-compliant potentials can be considered as a local and orbital-dependent counterpart to the electronic GW self-energy, albeit already including approximate vertex corrections. △ Less

Submitted 4 October, 2018; originally announced October 2018.

Journal ref: J. Chem. Theory Comput. 15 (3) , 1905-1914 (2019)

Probing optical excitations in chevron-like armchair graphene nanoribbons

Authors: Richard Denk, Alberto Lodi-Rizzini, Shudong Wang, Michael Hohage, Peter Zeppenfeld, Jinming Cai, Roman Fasel, Pascal Ruffieux, Reinhard Berger, Z. Chen, Akimitsu Narita, Xiliang Feng, Klaus Muellen, Roberto Biagi, Valentina De Renzi, Deborah Prezzi, Alice Ruini, Andrea Ferretti

Abstract: The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-init… ▽ More The bottom-up fabrication graphene nanoribbons (GNRs) has opened new opportunities to specifically control their electronic and optical properties by precisely controlling their atomic structure. Here, we address excitations in GNRs with periodic structural wiggles, so-called Chevron GNRs. Based on reflectance difference and high-resolution electron energy loss spectroscopies together with ab-initio simulations, we demonstrate that their excited-state properties are dominated by strongly bound excitons. The spectral fingerprints corresponding to different reaction stages in their bottom-up fabrication are also unequivocally identified, allowing us to follow the exciton build-up from the starting monomer precursor to the final ribbon structure. △ Less

Submitted 6 September, 2018; originally announced September 2018.

Journal ref: Nanoscale 9, 18326-18333 (2017)

Effects of spin-orbit coupling on the optical response of a material

Authors: Tae Yun Kim, Andrea Ferretti, Cheol-Hwan Park

Abstract: We investigate the effects of spin-orbit coupling on the optical response of materials. In particular, we study the effects of the commutator between the spin-orbit coupling part of the potential and the position operator on the optical matrix elements. Using a formalism that separates a fullyrelativistic Kleinman-Bylander pseudopotential into the scalar-relativistic and spin-orbit-coupling parts,… ▽ More We investigate the effects of spin-orbit coupling on the optical response of materials. In particular, we study the effects of the commutator between the spin-orbit coupling part of the potential and the position operator on the optical matrix elements. Using a formalism that separates a fullyrelativistic Kleinman-Bylander pseudopotential into the scalar-relativistic and spin-orbit-coupling parts, we calculate the contribution of the commutator arising from spin-orbit coupling to the squared optical matrix elements of isolated atoms, monolayer transition metal dichalcogenides, and topological insulators. In the case of isolated atoms from H ($Z = 1$) to Bi ($Z = 83$), the contribution of spin-orbit coupling to the squared matrix elements can be as large as 14 %. On the other hand, in the cases of monolayer transition metal dichalcogenides and topological insulators, we find that this contribution is less than 1 % and that it is sufficient to calculate the optical matrix elements and subsequent physical quantities without considering the commutator arising from spin-orbit coupling. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Comments: 13 pages, 14 figures

Journal ref: Phys. Rev. B 98, 245410 (2018)

The upgrade of the RPC-based ALICE Muon Trigger

Authors: A. Ferretti

Abstract: The ALICE Muon Trigger is currently yielded by a detector currently composed of 72 Bakelite single-gap Resistive Plate Chambers operated in maxi-avalanche mode, arranged in four 5.5x6.5 m2 detection planes. In order to meet the requirements posed by the forthcoming LHC high luminosity runs starting from 2021 onwards, in which ALICE will be read out in continuous mode, the Muon Trigger will become… ▽ More The ALICE Muon Trigger is currently yielded by a detector currently composed of 72 Bakelite single-gap Resistive Plate Chambers operated in maxi-avalanche mode, arranged in four 5.5x6.5 m2 detection planes. In order to meet the requirements posed by the forthcoming LHC high luminosity runs starting from 2021 onwards, in which ALICE will be read out in continuous mode, the Muon Trigger will become a Muon Identifier and will undergo a major upgrade. In the current setup, signals from about 21k strips are discriminated by 2400 non-amplified Front End (FEE) cards, whose thresholds are provided by external analog voltages (one for each chamber side). All these cards will be replaced with discriminators equipped with a pre-amplification stage which will allow a reduction in the operating high voltage of the detectors, thus prolonging their lifetime. Furthermore, their reference thresholds will be passed via wireless (and I2C chained per chamber side) allowing the tuning of the values at the single card level. Moreover, the 24 most exposed chambers will be replaced with new ones, equipped with high-quality (i.e. smoother surface) Bakelite laminates. The tests performed on the new FEE cards, used both in a test bench and on detectors, and on the new RPC chambers (with cosmic rays) are reported. △ Less

Submitted 15 June, 2018; originally announced June 2018.

Comments: Proceeding of the 14th Workshop on Resistive Plate Chambers and Related Detectors 19-23 February 2018 Puerto Vallarta, Jalisco State, Mexico

FePc Adsorption on the Moiré Superstructure of Graphene Intercalated with a Co Layer

Authors: Giulia Avvisati, Simone Lisi, Pierluigi Gargiani, Ada Della Pia, Oreste De Luca, Daniela Pacilé, Claudia Cardoso, Daniele Varsano, Deborah Prezzi, Andrea Ferretti, Maria Grazia Betti

Abstract: The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an ac… ▽ More The moiré superstructure of graphene grown on metals can drive the assembly of molecular architectures, as iron-phthalocyanine (FePc) molecules, allowing for the production of artificial molecular configurations. A detailed analysis of the Gr/Co interaction upon intercalation (including a modelling of the resulting moiré pattern) is performed here by density functional theory, which provides an accurate description of the template as a function of the corrugation parameters. The theoretical results are a preliminary step to describe the interaction process of the FePc molecules adsorption on the Gr/Co system. Core level photoemission and absorption spectroscopies have been employed to control the preferential adsorption regions of the FePc on the graphene moiré superstructure and the interaction of the central Fe ion with the underlying Co. Our results show that upon molecular adsorption the distance of C atoms from the Co template mainly drives the strength of the molecules-substrate interaction, thereby allowing for locally different electronic properties within the corrugated interface. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in J. Phys. Chem. C , copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.jpcc.6b09875

Journal ref: J. Phys. Chem. C, 2017, 121, 1639

Bright electroluminescence from single graphene nanoribbon junctions

Authors: Michael C. Chong, Nasima Afshar-Imani, Fabrice Scheurer, Claudia Cardoso, Andrea Ferretti, Deborah Prezzi, Guillaume Schull

Abstract: Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to… ▽ More Thanks to their highly tunable band gaps, graphene nanoribbons (GNRs) with atomically precise edges are emerging as mechanically and chemically robust candidates for nanoscale light emitting devices of modulable emission color. While their optical properties have been addressed theoretically in depth, only few experimental studies exist, limited to ensemble measurements and without any attempt to integrate them in an electronic-like circuit. Here we report on the electroluminescence of individual GNRs suspended between the tip of a scanning tunneling microscope (STM) and a Au(111) substrate, constituting thus a realistic opto-electronic circuit. Emission spectra of such GNR junctions reveal a bright and narrow band emission of red light, whose energy can be tuned with the bias voltage applied to the junction, but always lying below the gap of infinite GNRs. Comparison with {\it ab initio} calculations indicate that the emission involves electronic states localized at the GNR termini. Our results shed light on unpredicted optical transitions in GNRs and provide a promising route for the realization of bright, robust and controllable graphene-based light emitting devices. △ Less

Submitted 28 February, 2018; originally announced February 2018.

Comments: Supporting Information avail on the ACS website at DOI: 10.1021/acs.nanolett.7b03797

Journal ref: Nano Lett. 2018, 18, 175-181

Screening in orbital-density-dependent functionals

Authors: Nicola Colonna, Ngoc Linh Nguyen, Andrea Ferretti, Nicola Marzari

Abstract: Electronic-structure functionals that include screening effects, such as Hubbard or Koopmans' functionals, require to describe the response of a system to the fractional addition or removal of an electron from an orbital or a manifold. Here, we present a general method to incorporate screening based on linear-response theory, and we apply it to the case of the orbital-by-orbital screening of Koopm… ▽ More Electronic-structure functionals that include screening effects, such as Hubbard or Koopmans' functionals, require to describe the response of a system to the fractional addition or removal of an electron from an orbital or a manifold. Here, we present a general method to incorporate screening based on linear-response theory, and we apply it to the case of the orbital-by-orbital screening of Koopmans' functionals. We illustrate the importance of such generalization when dealing with challenging systems containing orbitals with very different chemical character, also highlighting the simple dependence of the screening on the localization of the orbitals. We choose a set of 46 transition-metal complexes for which experimental data and accurate many-body perturbation theory calculations are available. When compared to experiment, results for ionization potentials show a very good performance with a mean absolute error of $~0.2$ eV, comparable to the most accurate many-body perturbation theory approaches. These results reiterate the role of Koopmans' compliant functionals as simple and accurate quasiparticle approximations to the exact spectral functional, bypassing diagrammatic expansions and relying only on the physics of the local density or generalized-gradient approximation. △ Less

Submitted 13 November, 2017; originally announced November 2017.

Journal ref: J. Chem. Theory Comput. 14 (5), 2549 (2018)

Advanced capabilities for materials modelling with Quantum ESPRESSO

Authors: P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. Buongiorno Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. Dal Corso, S. de Gironcoli, P. Delugas, R. A. DiStasio Jr., A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia , et al. (25 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wi… ▽ More Quantum ESPRESSO is an integrated suite of open-source computer codes for quantum simulations of materials using state-of-the art electronic-structure techniques, based on density-functional theory, density-functional perturbation theory, and many-body perturbation theory, within the plane-wave pseudo-potential and projector-augmented-wave approaches. Quantum ESPRESSO owes its popularity to the wide variety of properties and processes it allows to simulate, to its performance on an increasingly broad array of hardware architectures, and to a community of researchers that rely on its capabilities as a core open-source development platform to implement theirs ideas. In this paper we describe recent extensions and improvements, covering new methodologies and property calculators, improved parallelization, code modularization, and extended interoperability both within the distribution and with external software. △ Less

Submitted 28 September, 2017; originally announced September 2017.

Comments: Psi-k highlight September 2017: psi-k.net/dowlnload/highlights/Highlight_137.pdf; J. Phys.: Condens. Matter, accepted

Journal ref: J. Phys.: Condens. Matter 29, 465901 (2017)