-
Exploring the photometric variability of ultra-cool dwarfs with TESS
Authors:
Romina P. Petrucci,
Yilen Gómez Maqueo Chew,
Emiliano Jofré,
Antígona Segura,
Leticia V. Ferrero
Abstract:
We present a photometric characterization of 208 ultra-cool dwarfs (UCDs) with spectral types between M4 and L4, from 20-second and 2-minute cadence TESS light curves. We determine rotation periods for 87 objects (42 percent) and identify 778 flare events in 103 UCDs (49.5 percent). For 777 flaring events (corresponding to 102 objects), we derive bolometric energies between 2.1e30 and 1.1e34 erg ,…
▽ More
We present a photometric characterization of 208 ultra-cool dwarfs (UCDs) with spectral types between M4 and L4, from 20-second and 2-minute cadence TESS light curves. We determine rotation periods for 87 objects (42 percent) and identify 778 flare events in 103 UCDs (49.5 percent). For 777 flaring events (corresponding to 102 objects), we derive bolometric energies between 2.1e30 and 1.1e34 erg , with 56 superflare events. No transiting planets or eclipsing binaries were identified. We find that the fraction of UCDs with rotation and flaring activity is, at least, 20 percent higher in M4-M6 spectral types than in later UCDs (M7-L4). For spectral types between M4 and L0, we measure the slope of the flare bolometric energy-duration correlation to be gamma = 0.497 +/- 0.058, which agrees with that found in previous studies for solar-type and M dwarfs. Moreover, we determine the slope of the flare frequency distribution to be alpha = -1.75 +/- 0.04 for M4-M5 dwarfs, alpha = -1.69 +/- 0.04 and alpha = -1.72 +/- 0.1 for M6-M7 and M8-L0 dwarfs, respectively, which are consistent with previous works that exclusively analysed UCDs. These results support the idea that independently of the physical mechanisms that produce magnetic activity, the characteristics of the rotational modulation and flares are similar for both fully-convective UCDs and partially-convective solar-type and early-M stars. Based on the measured UCD flare distributions, we find that UV radiation emitted from flares does not have the potential to start prebiotic chemistry.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Analysis methods for in-beam PET images in proton therapy treatment verification: a comparison based on Monte Carlo simulations
Authors:
M. Moglioni,
A. C. Kraan,
A. Berti,
P. Carra,
P. Cerello,
M. Ciocca,
V. Ferrero,
E. Fiorina,
E. Mazzoni,
M. Morrocchi,
F. Pennazio,
A. Retico,
V. Rosso,
G. Sportelli,
V. Vitolo,
G. Bisogni
Abstract:
Background and purpose: In-beam Positron Emission Tomography (PET) is one of the modalities that can be used for in-vivo non-invasive treatment monitoring in proton therapy. PET distributions obtained during various treatment sessions can be compared in order to identify regions that have anatomical changes. The purpose of this work is to test and compare different analysis methods in the context…
▽ More
Background and purpose: In-beam Positron Emission Tomography (PET) is one of the modalities that can be used for in-vivo non-invasive treatment monitoring in proton therapy. PET distributions obtained during various treatment sessions can be compared in order to identify regions that have anatomical changes. The purpose of this work is to test and compare different analysis methods in the context of inter-fractional PET image comparison for proton treatment verification.
Methods: For our study we used the FLUKA Monte Carlo code and artificially generated CT scans to simulate in-beam PET distributions at different stages during proton therapy treatment. We compared the Beam-Eye-View method, the Most-Likely-Shift method, the Voxel-Based-Morphology method and the gamma evaluation method to compare PET images at the start of treatment, and after a few weeks of treatment. The results were compared to the CT scan.
Results and conclusions: Three-dimensional methods like VBM and gamma are preferred above two-dimensional methods like MLS and BEV if much statistics is available, since the these methods allow to identify the regions with anomalous activity. The VBM approach has as disadvantage that a larger number of MC simulations is needed. The gamma analysis has the disadvantage that no clinical indication exist on tolerance criteria. In terms of calculation time, the BEV and MLS method are preferred. We recommend to use the four methods together, in order to best identify the location and cause of the activity changes.
△ Less
Submitted 1 December, 2022; v1 submitted 10 October, 2022;
originally announced October 2022.
-
High-resolution images of two wiggling stellar jets, MHO 1502 and MHO 2147, obtained with GSAOI+GeMS
Authors:
L. V. Ferrero,
G. Günthardt,
L. García,
M. Gómez,
V. M. Kalari,
H. P. Saldaño
Abstract:
We investigated the possible cause-effect relation between the wiggling shape of two stellar jets, MHO 1502 and MHO 2147, and the potential binarity of the respective driving stars.
We present high-angular-resolution H$_2$ (2.122 $μ$m) and K-band images obtained with the Gemini South Adaptive Optics Imager (GSAOI) and the Gemini Multi-conjugate Adaptive Optics System (GeMS). The profiles of the…
▽ More
We investigated the possible cause-effect relation between the wiggling shape of two stellar jets, MHO 1502 and MHO 2147, and the potential binarity of the respective driving stars.
We present high-angular-resolution H$_2$ (2.122 $μ$m) and K-band images obtained with the Gemini South Adaptive Optics Imager (GSAOI) and the Gemini Multi-conjugate Adaptive Optics System (GeMS). The profiles of the jets are depicted in detail by the H$_2$ images. We used K-band data to search for potential close companions to the previously suggested exciting sources, and used archive data to investigate these sources and the environments in which the jets are located. We also applied a model to reproduce the wiggling profiles of the jets.
MHO~1502 is composed of a chain of knots delineating the wiggling jet, suggesting that the driving source emitted them in an intermittent manner. Our K-band image of the previously proposed exciting star, IRAC 18064, shows two sources separated by $\sim240$ AU, hinting at its binarity. However, as IRAC 18064 is located off the jet axis at $\sim2064$ AU, it is questionable as to whether this source is the true exciting star. Moreover, the orbital model centred on IRAC 18064 suggests a binary companion at a much greater distance ($\sim2200$ AU) than the nearby star (at $\sim$240 AU). On the other hand, the orbital model centred on the axis provides the best fits. Nevertheless, the precession model centred on the axis cannot be discarded, despite having larger residuals and $χ^2$. MHO 2147 displays an S-shaped gentle continuous emission in H$_2$. We identify two other jets in the field of MHO 2147: a previously reported quasi-perpendicular jet, MHO 2148, and a third jet adjacent to MHO 2147. The model that best fits the morphology of the MHO 2147 jet and that of its adjacent jet is precession. The exciting source of MHO 2147 may be a triple system.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Classifying Component Function in Product Assemblies with Graph Neural Networks
Authors:
Vincenzo Ferrero,
Kaveh Hassani,
Daniele Grandi,
Bryony DuPont
Abstract:
Function is defined as the ensemble of tasks that enable the product to complete the designed purpose. Functional tools, such as functional modeling, offer decision guidance in the early phase of product design, where explicit design decisions are yet to be made. Function-based design data is often sparse and grounded in individual interpretation. As such, function-based design tools can benefit f…
▽ More
Function is defined as the ensemble of tasks that enable the product to complete the designed purpose. Functional tools, such as functional modeling, offer decision guidance in the early phase of product design, where explicit design decisions are yet to be made. Function-based design data is often sparse and grounded in individual interpretation. As such, function-based design tools can benefit from automatic function classification to increase data fidelity and provide function representation models that enable function-based intelligent design agents. Function-based design data is commonly stored in manually generated design repositories. These design repositories are a collection of expert knowledge and interpretations of function in product design bounded by function-flow and component taxonomies. In this work, we represent a structured taxonomy-based design repository as assembly-flow graphs, then leverage a graph neural network (GNN) model to perform automatic function classification. We support automated function classification by learning from repository data to establish the ground truth of component function assignment. Experimental results show that our GNN model achieves a micro-average F${_1}$-score of 0.832 for tier 1 (broad), 0.756 for tier 2, and 0.783 for tier 3 (specific) functions. Given the imbalance of data features, the results are encouraging. Our efforts in this paper can be a starting point for more sophisticated applications in knowledge-based CAD systems and Design-for-X consideration in function-based design.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
A Deep Learning Approach for Characterizing Major Galaxy Mergers
Authors:
Skanda Koppula,
Victor Bapst,
Marc Huertas-Company,
Sam Blackwell,
Agnieszka Grabska-Barwinska,
Sander Dieleman,
Andrea Huber,
Natasha Antropova,
Mikolaj Binkowski,
Hannah Openshaw,
Adria Recasens,
Fernando Caro,
Avishai Deke,
Yohan Dubois,
Jesus Vega Ferrero,
David C. Koo,
Joel R. Primack,
Trevor Back
Abstract:
Fine-grained estimation of galaxy merger stages from observations is a key problem useful for validation of our current theoretical understanding of galaxy formation. To this end, we demonstrate a CNN-based regression model that is able to predict, for the first time, using a single image, the merger stage relative to the first perigee passage with a median error of 38.3 million years (Myrs) over…
▽ More
Fine-grained estimation of galaxy merger stages from observations is a key problem useful for validation of our current theoretical understanding of galaxy formation. To this end, we demonstrate a CNN-based regression model that is able to predict, for the first time, using a single image, the merger stage relative to the first perigee passage with a median error of 38.3 million years (Myrs) over a period of 400 Myrs. This model uses no specific dynamical modeling and learns only from simulated merger events. We show that our model provides reasonable estimates on real observations, approximately matching prior estimates provided by detailed dynamical modeling. We provide a preliminary interpretability analysis of our models, and demonstrate first steps toward calibrated uncertainty estimation.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
The FragmentatiOn Of Target Experiment (FOOT) and its DAQ system
Authors:
Silvia Biondi,
Andrey Alexandrov,
Behcet Alpat,
Giovanni Ambrosi,
Stefano Argirò,
Rau Arteche Diaz,
Nazarm Bartosik,
Giuseppe Battistoni,
Nicola Belcari,
Elettra Bellinzona,
Maria Giuseppina Bisogni,
Graziano Bruni,
Pietro Carra,
Piergiorgio Cerello,
Esther Ciarrocchi,
Alberto Clozza,
Sofia Colombi,
Giovanni De Lellis,
Alberto Del Guerra,
Micol De Simoni,
Antonia Di Crescenzo,
Benedetto Di Ruzza,
Marco Donetti,
Yunsheng Dong,
Marco Durante
, et al. (70 additional authors not shown)
Abstract:
The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experim…
▽ More
The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experiment has been developed in such a way that the experimental setup is easily movable and fits the space limitations of the experimental and treatment rooms available in hadrontherapy treatment centers, where most of the data takings are carried out. The Trigger and Data Acquisition system needs to follow the same criteria and it should work in different laboratories and in different conditions. It has been designed to acquire the largest sample size with high accuracy in a controlled and online-monitored environment. The data collected are processed in real-time for quality assessment and are available to the DAQ crew and detector experts during data taking.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Multifrequency study of HH 137 and HH 138: Discovering new knots and molecular outflows with Gemini and APEX
Authors:
Leticia V. Ferrero,
Cristina E. Cappa,
Hugo P. Saldaño,
Mercedes Gómez,
Mónica Rubio,
Guillermo Güthardt
Abstract:
We present a multi-wavelength study of two HH objects (137 and 138) that may be associated. We use Gemini H$_2$ (2.12 $μ$m) and K (2.2 $μ$m) images, as well as APEX molecular line observations and Spitzer image archives. Several H$_2$ knots, linked to the optical chain of knots of HH 137, are identified in the Gemini and Spitzer 4.5 $μ$m images. New shock excited regions related to the optical kno…
▽ More
We present a multi-wavelength study of two HH objects (137 and 138) that may be associated. We use Gemini H$_2$ (2.12 $μ$m) and K (2.2 $μ$m) images, as well as APEX molecular line observations and Spitzer image archives. Several H$_2$ knots, linked to the optical chain of knots of HH 137, are identified in the Gemini and Spitzer 4.5 $μ$m images. New shock excited regions related to the optical knots delineating HH 138 are also reported. In addition, a bright 4.5 $μ$m 0.09 pc-long arc-shaped structure, roughly located mid-way between HH 137 and HH 138, is found to be associated with two Spitzer Class I/II objects, which are likely to be the exciting stars. These sources are almost coincident with a high-density molecular clump detected in $^{12}$CO(3-2), $^{13}$CO(3-2), C$^{18}$O(3-2), HCO$^{+}$(3-2) and HCN(3-2) molecular lines with an LTE mass of 36 M$_{\odot}$. The $^{12}$CO(3-2) emission distribution over the observed region reveals molecular material underlying three molecular outflows. Two of them (outflows 1 and 2) are linked to all optical knots of HH 137 and HH 138 and to the H$_2$ and 4.5 $μ$m shock emission knots. In fact, the outflow 2 shows an elongated $^{12}$CO blue lobe that coincides with all the H$_2$ knots of HH 137 which end at a terminal H$_2$ bow shock. We propose a simple scenario that connects the outflows to the dust clumps detected in the region. A third possible outflow is located to the north-east projected towards a secondary weak and cold dust clump.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
On the reconstruction accuracy of multi-coil MRI with orthogonal projections
Authors:
Anna Breger,
Gabriel Ramos Llorden,
Gonzalo Vegas Sanchez - Ferrero,
W. Scott Hoge,
Martin Ehler,
Carl-Fredrik Westin
Abstract:
MRI signal acquisition with multiple coils in a phased array is nowadays commonplace. The use of multiple receiver coils increases the signal-to-noise ratio (SNR) and enables accelerated parallel imaging methods. Some of these methods, like GRAPPA or SPIRiT, yield individual coil images in the k-space domain which need to be combined to form a final image. Coil combination is often the last step o…
▽ More
MRI signal acquisition with multiple coils in a phased array is nowadays commonplace. The use of multiple receiver coils increases the signal-to-noise ratio (SNR) and enables accelerated parallel imaging methods. Some of these methods, like GRAPPA or SPIRiT, yield individual coil images in the k-space domain which need to be combined to form a final image. Coil combination is often the last step of the image reconstruction, where the root sum of squares (rSOS) is frequently used. This straightforward method works well for coil images with high SNR, but can yield problems in images with artifacts or low SNR in all individual coils. We aim to analyze the final coil combination step in the framework of linear compression, including principal component analysis (PCA). With two data sets, a simulated and an in-vivo, we use random projections as a representation of the whole space of orthogonal projections. This allows us to study the impact of linear compression in the image space with diverse measures of reconstruction accuracy. In particular, the $L_2$ error, variance, SNR, and visual results serve as performance measures to describe the final image quality. We study their relationships and observe that the $L_2$ error and variance strongly correlate, but as expected minimal $L_2$ error does not necessarily correspond to the best visual results. In terms of visual evaluation and SNR, the compression with PCA outperforms all other methods, including rSOS on the uncompressed image space data.
△ Less
Submitted 27 November, 2019; v1 submitted 29 October, 2019;
originally announced October 2019.
-
Impact of the Overall Electrical Filter Shaping in Next-Generation 25G and 50G PON
Authors:
Pablo Torres-Ferrera,
Valter Ferrero,
Maurizio Valvo,
Roberto Gaudino
Abstract:
Next-generation high-speed passive optical network (HS-PON) transceivers supporting 25, 50 and 100 Gb/s are under the early stage of their standardization process. One key aspect of this process is the choice of the best modulation format. To this end, performance comparisons among several modulation formats against different physical constraints have been presented in literature and are still bei…
▽ More
Next-generation high-speed passive optical network (HS-PON) transceivers supporting 25, 50 and 100 Gb/s are under the early stage of their standardization process. One key aspect of this process is the choice of the best modulation format. To this end, performance comparisons among several modulation formats against different physical constraints have been presented in literature and are still being carried out. In our contribution, we performed an exhaustive analysis on the impact of transceivers electrical frequency response shape on the performance of 2-levels pulse amplitude modulation (PAM-2), 4-levels PAM (PAM-4), electrical and optical duobinary modulation formats with adaptive equalizer at the receiver side. We show by means of numerical simulations that the specification of the typically used -3dB bandwidth is not sufficient, since also out-of-band electrical frequency response specifications (such as the -20dB bandwidth) has a huge impact on the performance of the analyzed modulation formats. The normalized graphs given at the end of the paper in terms of -3dB and -20 dB bandwidths can thus be useful for the design of the next generation of HS-PON transceivers.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
A search for transit timing variations and orbital decay in WASP-46b
Authors:
R. Petrucci,
E. Jofré,
L. V. Ferrero,
V. Cúneo,
L. Saker,
F. Lovos,
M. Gómez,
P. Mauas
Abstract:
We present 12 new transit observations of the exoplanet WASP-46b obtained with the 1.54-m telescope at Estación Astrofísica de Bosque Alegre (EABA, Argentina) and the 0.40-m Horacio Ghielmetti and 2.15-m Jorge Sahade telescopes at Complejo Astronómico El Leoncito (CASLEO, Argentina). We analyse them together with 37 light curves from the literature to re-determine the physical parameters and searc…
▽ More
We present 12 new transit observations of the exoplanet WASP-46b obtained with the 1.54-m telescope at Estación Astrofísica de Bosque Alegre (EABA, Argentina) and the 0.40-m Horacio Ghielmetti and 2.15-m Jorge Sahade telescopes at Complejo Astronómico El Leoncito (CASLEO, Argentina). We analyse them together with 37 light curves from the literature to re-determine the physical parameters and search for additional planets via transit timing variations (TTVs). We consider the 31 transits with uncertainties in their mid-transit times ($e_\mathrm{T_{0}}$) $<$ 1 minute, to perform the first homogeneous study of TTVs for the system, finding a dispersion of $σ= 1.66$ minutes over a 6 year baseline. Since no periodic variations are found, our interpretation for this relatively high value of $σ$ is that the stellar activity could be affecting the measured mid-transit times. This value of dispersion allows us to rule out the presence of additional bodies with masses larger than 2.3, 4.6, 7, and 9.3 $M_{\mathrm{\bigoplus}}$ at the first-order mean-motion resonances 2:1, 3:2, 4:3, and 5:4 with the transiting planet, respectively. Despite the 6 year baseline and a typical light curve precision of $2 \times 10^{-3}$, we find that we cannot significantly demonstrate a slow decrease of the orbital period of WASP-46b. We place a lower limit of Q$_{\star}$ > $7 \times 10^{3}$ on the tidal quality factor and determine that an additional 6 year baseline is required to rule out Q$_{\star}$ < $10^{5}$.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
