-
Experimental end-to-end demonstration of intersatellite absolute ranging for LISA
Authors:
Kohei Yamamoto,
Iouri Bykov,
Jan Niklas Reinhardt,
Christoph Bode,
Pascal Grafe,
Martin Staab,
Narjiss Messied,
Myles Clark,
Germán Fernández Barranco,
Thomas S. Schwarze,
Olaf Hartwig,
Juan José Esteban Delgado,
Gerhard Heinzel
Abstract:
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on…
▽ More
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on-ground observatories, optical sideband-sideband beatnotes, pseudo-random noise ranging (PRNR), and time-delay interferometric ranging (TDIR). This article reports on the experimental end-to-end demonstration of a hexagonal optical testbed used to extract absolute ranges via the optical sidebands, PRNR, and TDIR. These were applied for clock synchronization of optical beatnote signals sampled at independent phasemeters. We set up two possible PRNR processing schemes: Scheme 1 extracts pseudoranges from PRNR via a calibration relying on TDIR; Scheme 2 synchronizes all beatnote signals without TDIR calibration. The schemes rely on newly implemented monitors of local PRNR biases. After the necessary PRNR treatments (unwrapping, ambiguity resolution, bias correction, in-band jitter reduction, and/or calibration), Scheme 1 and 2 achieved ranging accuracies of 2.0 cm to 8.1 cm and 5.8 cm to 41.1 cm, respectively, below the classical 1 m mark with margins.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Single-Element Dual-Interferometer for Precision Inertial Sensing: Sub-picometer Structural Stability and Performance as a Reference for Laser Frequency Stabilization
Authors:
Victor Huarcaya,
Miguel Dovale Álvarez,
Kohei Yamamoto,
Yichao Yang,
Stefano Gozzo,
Pablo Martínez Cano,
Moritz Mehmet,
Juan José Esteban Delgado,
Jianjun Jia,
Gerhard Heinzel
Abstract:
To reach sub-picometer sensitivity in the millihertz range, displacement sensors based on laser interferometry require suppression of laser-frequency noise by several orders of magnitude. Many optical frequency stabilization methods exist with varying levels of complexity, size, and performance. In this paper, we describe the performance of a compact Mach-Zehnder interferometer based on a monolith…
▽ More
To reach sub-picometer sensitivity in the millihertz range, displacement sensors based on laser interferometry require suppression of laser-frequency noise by several orders of magnitude. Many optical frequency stabilization methods exist with varying levels of complexity, size, and performance. In this paper, we describe the performance of a compact Mach-Zehnder interferometer based on a monolithic optic. The setup consists of a commercial fiber injector, a custom-designed pentaprism used to split and recombine the laser beam, and two photoreceivers placed at the complementary output ports of the interferometer. The structural stability of the prism is transferred to the laser frequency via amplification, integration, and feedback of the balanced-detection signal, achieving a fractional frequency instability better than 6 parts in $10^{13}$, corresponding to an interferometer pathlength stability better than $10^{-12}$ m$/\sqrt{\mathrm{Hz}}$.
△ Less
Submitted 1 December, 2023; v1 submitted 2 October, 2023;
originally announced October 2023.
-
$2\cdot 10^{-13}$ fractional laser frequency stability with a 7-cm unequal-arm Mach-Zehnder interferometer
Authors:
Victor Huarcaya,
Miguel Dovale Álvarez,
Daniel Penkert,
Stefano Gozzo,
Pablo Martínez Cano,
Kohei Yamamoto,
Juan José Esteban Delgado,
Moritz Mehmet,
Karsten Danzmann,
Gerhard Heinzel
Abstract:
To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabiliza…
▽ More
To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabilization technique based on an unequal-arm Mach-Zehnder interferometer that is sub-nanometer stable at $10\,μ$Hz, sub-picometer at $0.5\,$mHz, and reaches a noise floor of $7\,\mathrm{fm}/\!\sqrt{\mathrm{Hz}}$ at 1 Hz. The interferometer is used in conjunction with a DC servo to stabilize the frequency of a laser down to a fractional instability below $4 \times 10^{-13}$ at averaging times from 0.1 to 100 seconds. The technique offers a wide operating range, does not rely on complex lock acquisition procedures, and can be readily integrated as part of the optical bench in future gravity missions.
△ Less
Submitted 29 August, 2023; v1 submitted 22 August, 2023;
originally announced August 2023.
-
On-axis Optical Bench for Laser Ranging Instruments in future gravity missions
Authors:
Yichao Yang,
Kohei Yamamoto,
Miguel Dovale Álvarez,
Daikang Wei,
Juan Jose Esteban Delgado,
Vitali Müller,
Jianjun Jia,
Gerhard Heinzel
Abstract:
The Laser Ranging Interferometer onboard the Gravity Recovery and Climate Experiment Follow-On mission proved the feasibility of an interferometric sensor for inter-satellite length tracking with sub-nanometer precision, establishing an important milestone for space laser interferometry and the general expectation that future gravity missions will employ heterodyne laser interferometry for satelli…
▽ More
The Laser Ranging Interferometer onboard the Gravity Recovery and Climate Experiment Follow-On mission proved the feasibility of an interferometric sensor for inter-satellite length tracking with sub-nanometer precision, establishing an important milestone for space laser interferometry and the general expectation that future gravity missions will employ heterodyne laser interferometry for satellite-to-satellite ranging. In this paper we present the design of an on-axis optical bench for next-generation laser ranging which enhances the received optical power and the transmit beam divergence, enabling longer interferometer arms and relaxing the optical power requirement of the laser assembly. All design functionalities and requirements are verified by means of computer simulations. A thermal analysis is carried out to investigate the robustness of the proposed optical bench to the temperature fluctuations found in orbit.
△ Less
Submitted 4 March, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Single-element dual-interferometer for precision inertial sensing
Authors:
Yichao Yang,
Kohei Yamamoto,
Victor Huarcaya,
Christoph Vorndamme,
Daniel Penkert,
Germán Fernández Barranco,
Thomas S Schwarze,
Juan Jose Esteban Delgado,
Moritz Mehmet,
Jianjun Jia,
Gerhard Heinzel,
Miguel Dovale Álvarez
Abstract:
Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical…
▽ More
Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical setup, a key limitation of multi-channel interferometry. By shifting the complexity of the setup to the signal processing stage, these methods enable devices with a size and weight not feasible using conventional techniques. In this paper we present the design of a novel sensor topology based on deep frequency modulation interferometry: the self-referenced single-element dual-interferometer (SEDI) inertial sensor, which takes simplification one step further by accommodating two interferometers in one optic. Using a combination of computer models and analytical methods we show that an inertial sensor with sub-picometer precision for frequencies above 10 mHz, in a package of a few cubic inches, seems feasible with our approach. Moreover we show that by combining two of these devices it is possible to reach sub-picometer precision down to 2 mHz. In combination with the given compactness, this makes the SEDI sensor a promising approach for applications in high precision inertial sensing for both next-generation space-based gravity missions employing drag-free control, and ground-based experiments employing inertial isolation systems with optical readout.
△ Less
Submitted 31 August, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Tracking length and differential wavefront sensing signals from quadrant photodiodes in heterodyne interferometers with digital phase-locked loop readout
Authors:
Gerhard Heinzel,
Miguel Dovale Álvarez,
Alvise Pizzella,
Nils Brause,
Juan José Esteban Delgado
Abstract:
We propose a method to track signals from quadrant photodiodes (QPD) in heterodyne laser interferometers that employ digital phase-locked loops for phase readout. Instead of separately tracking the four segments from the QPD and then combining the results into length and Differential Wavefront Sensing (DWS) signals, this method employs a set of coupled tracking loops that operate directly on the c…
▽ More
We propose a method to track signals from quadrant photodiodes (QPD) in heterodyne laser interferometers that employ digital phase-locked loops for phase readout. Instead of separately tracking the four segments from the QPD and then combining the results into length and Differential Wavefront Sensing (DWS) signals, this method employs a set of coupled tracking loops that operate directly on the combined length and angular signals. Benefits are increased signal-to-noise ratio in the loops and the possibility to adapt the loop bandwidths to the different dynamical behavior of the signals being tracked, which now correspond to physically meaningful observables. We demonstrate an improvement of up to 6 dB over single-segment tracking, which makes this scheme an attractive solution for applications in precision inter-satellite laser interferometry in ultra-low-light conditions.
△ Less
Submitted 14 November, 2020; v1 submitted 30 April, 2020;
originally announced May 2020.
-
Optical suppression of tilt-to-length coupling in the LISA long-arm interferometer
Authors:
M Chwalla,
K Danzmann,
M Dovale Álvarez,
J J Esteban Delgado,
G Fernández Barranco,
E Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Lieser,
M Perreur-Lloyd,
D I Robertson,
J M Rohr,
S Schuster,
T S Schwarze,
M Tröbs,
G Wanner,
H Ward
Abstract:
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultr…
▽ More
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultra-stable interferometer testbed has been developed in order to investigate this issue and validate mitigation strategies in a setup representative of LISA, and in this paper it is operated in the long-arm interferometer configuration. The testbed is fitted with a flat-top beam generator to simulate the beam received by a LISA spacecraft. We demonstrate a reduction of TTL coupling between this flat-top beam and a Gaussian reference beam via introducing two- and four-lens imaging systems. TTL coupling factors below $\pm 25\,μ$m/rad for beam tilts within $\pm 300\,μ$rad are obtained by careful optimization of the system. Moreover we show that the additional TTL coupling due to lateral alignment errors of elements of the imaging system can be compensated by introducing lateral shifts of the detector, and vice versa. These findings help validate the suitability of this noise-reduction technique for the LISA long-arm interferometer.
△ Less
Submitted 5 June, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision
Authors:
Oliver Gerberding,
Christian Diekmann,
Joachim Kullmann,
Michael Tröbs,
Ioury Bykov,
Simon Barke,
Nils Christopher Brause,
Juan José Esteban Delgado,
Thomas S. Schwarze,
Jens Reiche,
Karsten Danzmann,
Torben Rasmussen,
Torben Vendt Hansen,
Anders Engaard,
Søren Møller Pedersen,
Oliver Jennrich,
Martin Suess,
Zoran Sodnik,
Gerhard Heinzel
Abstract:
Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $μ\textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between…
▽ More
Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $μ\textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between $0.1\,\textrm{mHz}$ and $1\,\textrm{Hz}$. In this paper, we present phase readout systems, so-called phasemeters, that are able to achieve such precisions and we discuss various means that have been employed to reduce noise in the analogue circuit domain and during digitisation. We also discuss the influence of some non-linear noise sources in the analogue domain of such phasemeters. And finally, we present the performance that was achieved during testing of the elegant breadboard model of the LISA phasemeter, that was developed in the scope of an ESA technology development activity.
△ Less
Submitted 30 April, 2015;
originally announced April 2015.
-
The Gravitational Wave Observatory Designer: Sensitivity Limits of Spaceborne Detectors
Authors:
Simon Barke,
Yan Wang,
Juan Jose Esteban Delgado,
Michael Tröbs,
Gerhard Heinzel,
Karsten Danzmann
Abstract:
The most promising concept for low frequency gravitational wave observatories are laser interferometric detectors in space. It is usually assumed that the noise floor for such a detector is dominated by optical shot noise in the signal readout. For this to be true, a careful balance of mission parameters is crucial to keep all other parasitic disturbances below shot noise. We developed a web appli…
▽ More
The most promising concept for low frequency gravitational wave observatories are laser interferometric detectors in space. It is usually assumed that the noise floor for such a detector is dominated by optical shot noise in the signal readout. For this to be true, a careful balance of mission parameters is crucial to keep all other parasitic disturbances below shot noise. We developed a web application that uses over 30 input parameters and considers many important technical noise sources and noise suppression techniques. It optimizes free parameters automatically and generates a detailed report on all individual noise contributions. Thus you can easily explore the entire parameter space and design a realistic gravitational wave observatory.
In this document we describe the different parameters, present all underlying calculations, and compare the final observatory's sensitivity with astrophysical sources of gravitational waves. We use as an example parameters currently assumed to be likely applied to a space mission to be launched in 2034 by the European Space Agency. The web application itself is publicly available on the Internet at http://spacegravity.org/designer.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Phasemeter core for intersatellite laser heterodyne interferometry: modelling, simulations and experiments
Authors:
Oliver Gerberding,
Benjamin Sheard,
Iouri Bykov,
Joachim Kullmann,
Juan Jose Esteban Delgado,
Karsten Danzmann,
Gerhard Heinzel
Abstract:
Inter satellite laser interferometry is a central component of future space-borne gravity instruments like LISA, eLISA, NGO and future geodesy missions. The inherently small laser wavelength allows to measure distance variations with extremely high precision by interfering a reference beam with a measurement beam. The readout of such interferometers is often based on tracking phasemeters, able to…
▽ More
Inter satellite laser interferometry is a central component of future space-borne gravity instruments like LISA, eLISA, NGO and future geodesy missions. The inherently small laser wavelength allows to measure distance variations with extremely high precision by interfering a reference beam with a measurement beam. The readout of such interferometers is often based on tracking phasemeters, able to measure the phase of an incoming beatnote with high precision over a wide range of frequencies. The implementation of such phasemeters is based on all digital phase-locked loops, hosted in FPGAs. Here we present a precise model of an all digital phase locked loop that allows to design such a readout algorithm and we support our analysis by numerical performance measurements and experiments with analog signals.
△ Less
Submitted 9 October, 2013;
originally announced October 2013.