-
Line tension in a thick soap film
Authors:
Théo Lenavetier,
Gaëlle Audéoud,
Marion Berry,
Anaïs Gauthier,
Raphael Poryles,
C. Tregouet,
Isabelle Cantat
Abstract:
The thickness of freshly made soap films is usually in the micron range, and interference colors make thickness fluctuations easily visible. Circular patterns of constant thickness are commonly observed, either a thin film disc in a thicker film or the reverse. In this Letter, we evidence the line tension at the origin of these circular patterns. Using a well controlled soap film preparation, we…
▽ More
The thickness of freshly made soap films is usually in the micron range, and interference colors make thickness fluctuations easily visible. Circular patterns of constant thickness are commonly observed, either a thin film disc in a thicker film or the reverse. In this Letter, we evidence the line tension at the origin of these circular patterns. Using a well controlled soap film preparation, we produce a piece of thin film surrounded by a thicker film. The thickness profile, measured with a spectral camera, leads to a line tension of the order of 0.1 nN which drives the relaxation of the thin film shape, initially very elongated, toward a circular shape.A balance between line tension and air friction leads to a quantitative prediction of the relaxation process. Such a line tension is expected to play a role in the production of marginal regeneration patches, involved in soap film drainage and stability.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Thickness profiles of giant soap films
Authors:
Marina Pasquet,
Frédéric Restagno,
Isabelle Cantat,
Emmanuelle Rio
Abstract:
Production, drainage and stability of foams films, i.e. films in contact with their menisci, are fascinating problems that remain still unsolved. In this article, we propose to explore the regime of large velocities and large film sizes. This one is not accessible in experiments classically conducted in the literature, and allows us to study the regime of large extension and large extension rates.…
▽ More
Production, drainage and stability of foams films, i.e. films in contact with their menisci, are fascinating problems that remain still unsolved. In this article, we propose to explore the regime of large velocities and large film sizes. This one is not accessible in experiments classically conducted in the literature, and allows us to study the regime of large extension and large extension rates. With our setup, we make soap films up to two meters high by pulling a horizontal fishing line driven by belts out of a soapy solution at velocities ranging from 20~cm/s to 250~cm/s. We characterize the thickness profile of the central part of the film that behaves like a rubber band under tension. We show that its thickness profile is well described by a static model in which a homogeneous elastic film is stretched by its own weight. This leads to an exponential thickness profile with a characteristic length given by a competition between gravity and surface elasticity. The prefactor is fixed by the shape and area of the film, governed by the fishing line motion but also by a continuous extraction of foam film from the lateral menisci, thicker than the central part, and that progressively invades the film from its lateral boundaries. The model we propose captures the subtle interplay between gravity, film elasticity and film extraction and leads to predictions in good agreement with our experimental data.
△ Less
Submitted 21 April, 2023; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Local origin of the visco-elasticity of a millimetric elementary foam
Authors:
Adrien Bussonnière,
Isabelle Cantat
Abstract:
Liquid foam exhibits surprisingly high viscosity, higher than each of its phases. This dissipation enhancement has been rationalized by invoking either a geometrical confinement of the shear in the liquid phase, or the influence of the interface viscosity. However, a precise localization of the dissipation, and its mechanism, at the bubble scale is still lacking. To this aim, we simultaneously mon…
▽ More
Liquid foam exhibits surprisingly high viscosity, higher than each of its phases. This dissipation enhancement has been rationalized by invoking either a geometrical confinement of the shear in the liquid phase, or the influence of the interface viscosity. However, a precise localization of the dissipation, and its mechanism, at the bubble scale is still lacking. To this aim, we simultaneously monitored the evolution of the local flow velocity, film thickness and surface tension of a five films assembly, induced by different controlled deformations. These measurements allow us to build local constitutive relations for this foam elementary brick. We first show that, for our millimetric foam films, the main part of the film has a purely elastic, reversible behavior, thus ruling out the interface viscosity to explain the observed dissipation. We then highlight a generic frustration at the menisci, controlling the interface transfer between neighbor films and resulting in the localization of a bulk shear flow close to the menisci. A model accounting for surfactant transport in these small sheared regions is developed. It is in good agreement with the experiment, and demonstrate that most of the dissipation is localized in these domains. The length of these sheared regions, determined by the physico-chemical properties of the solution, sets a transition between a large bubble regime in which the films are mainly stretched and compressed, and a small bubble regime in which they are sheared. Finally, we discuss the parameter range where a model of foam viscosity could be built on the basis of these local results.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Dynamical coupling between connected foam films by interface transfer across the menisci
Authors:
Adrien Bussonnière,
Evgenia Shabalina,
Xavier Ah-Thon,
Mickaël Le Fur,
Isabelle Cantat
Abstract:
The highly confined flow of the liquid phase, trapped between the gas bubbles, is at the origin of the large effective viscosity of the liquid foams. Despite the industrial relevance of this complex fluid, the foam viscosity remains difficult to predict, because of the lack of flow characterization at the bubble scale. Using an original deformable frame, we provide the first experimental evidence…
▽ More
The highly confined flow of the liquid phase, trapped between the gas bubbles, is at the origin of the large effective viscosity of the liquid foams. Despite the industrial relevance of this complex fluid, the foam viscosity remains difficult to predict, because of the lack of flow characterization at the bubble scale. Using an original deformable frame, we provide the first experimental evidence of the interface transfer between a compressed film (resp. a stretched film) and its first neighbour, across their common meniscus. We measure this transfer velocity, which is a key boundary condition for local flows in foams. We also show the dramatic film thickness variation induced by this interface transfer, which may play an important role in the film thickness distribution of a 3D foam sample.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
The Marangoni flow of soluble amphiphiles
Authors:
Matthieu Roché,
Zhenzhen Li,
Ian M. Griffiths,
Sébastien Le Roux,
Isabelle Cantat,
Arnaud Saint-Jalmes,
Howard A. Stone
Abstract:
Surfactant distribution heterogeneities at a fluid/fluid interface trigger the Marangoni effect, i.e. a bulk flow due to a surface tension gradient. The influence of surfactant solubility in the bulk on these flows remains incompletely characterized. Here we study Marangoni flows sustained by injection of hydrosoluble surfactants at the air/water interface. We show that the flow extent increases w…
▽ More
Surfactant distribution heterogeneities at a fluid/fluid interface trigger the Marangoni effect, i.e. a bulk flow due to a surface tension gradient. The influence of surfactant solubility in the bulk on these flows remains incompletely characterized. Here we study Marangoni flows sustained by injection of hydrosoluble surfactants at the air/water interface. We show that the flow extent increases with a decrease of the critical micelle concentration, i.e. the concentration at which these surfactants self-assemble in water. We document the universality of the surface velocity field and predict scaling laws based on hydrodynamics and surfactant physicochemistry that capture the flow features.
△ Less
Submitted 13 December, 2013;
originally announced December 2013.
-
Extension of a suspended soap film: A homogeneous dilatation followed by new film extraction
Authors:
Jacopo Seiwert,
Martin Monloubou,
Benjamin Dollet,
Isabelle Cantat
Abstract:
Liquid foams are widely used in industry for their high effective viscosity, whose local origin is still unclear. This Letter presents new results on the extension of a suspended soap film, in a configuration mimicking the elementary deformation occurring during foam shearing. We evidence a surprising two-step evolution: the film first extends homogeneously, then its extension stops, and a new thi…
▽ More
Liquid foams are widely used in industry for their high effective viscosity, whose local origin is still unclear. This Letter presents new results on the extension of a suspended soap film, in a configuration mimicking the elementary deformation occurring during foam shearing. We evidence a surprising two-step evolution: the film first extends homogeneously, then its extension stops, and a new thicker film is extracted from the meniscus. The second step is independent of the nature of the surfactant solution, whereas the initial extension is only observed for surfactant solutions with negligible dilatational moduli. We predict this complex behavior using a model based on Frankel's theory and on interface rigidification induced by confinement.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Structure-dependent mobility of a dry aqueous foam flowing along two parallel channels
Authors:
Sian A. Jones,
Benjamin Dollet,
Yves Méheust,
Simon J. Cox,
Isabelle Cantat
Abstract:
The velocity of a two-dimensional aqueous foam has been measured as it flows through two parallel channels, at a constant overall volumetric flow rate. The flux distribution between the two channels is studied as a function of the ratio of their widths. A peculiar dependence of the velocity ratio on the width ratio is observed when the foam structure in the narrower channel is either single stairc…
▽ More
The velocity of a two-dimensional aqueous foam has been measured as it flows through two parallel channels, at a constant overall volumetric flow rate. The flux distribution between the two channels is studied as a function of the ratio of their widths. A peculiar dependence of the velocity ratio on the width ratio is observed when the foam structure in the narrower channel is either single staircase or bamboo. In particular, discontinuities in the velocity ratios are observed at the transitions between double and single staircase and between single staircase and bamboo. A theoretical model accounting for the viscous dissipation at the solid wall and the capillary pressure across a film pinned at the channel outlet predicts the observed non-monotonic evolution of the velocity ratio as a function of the width ratio. It also predicts quantitatively the intermittent temporal evolution of the velocity in the narrower channel when it is so narrow that film pinning at its outlet repeatedly brings the flow to a near stop.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Liquid meniscus friction on a wet plate: Bubbles, lamellae and foams
Authors:
Isabelle Cantat
Abstract:
Many microfluidics devices, coating processes or diphasic flows involve the motion of a liquid meniscus on a wet wall. This motion induces a specific viscous force, that exhibits a non-linear dependency in the meniscus velocity. We propose a review of the theoretical and experimental work made on this viscous force, for simple interfacial properties. The interface is indeed assumed either perfectl…
▽ More
Many microfluidics devices, coating processes or diphasic flows involve the motion of a liquid meniscus on a wet wall. This motion induces a specific viscous force, that exhibits a non-linear dependency in the meniscus velocity. We propose a review of the theoretical and experimental work made on this viscous force, for simple interfacial properties. The interface is indeed assumed either perfectly compressible (mobile interface) or perfectly incompressible (rigid interface). We show that, in the second case, the viscous force exerted by the wall on the meniscus is a combination of two power laws, scaling like $Ca^{1/3}$ and $Ca^{2/3}$, with $Ca$ the capillary number. We provide a prediction for the stress exerted on a foam sliding on a wet solid and compare it with experimental data, for the incompressible case.
△ Less
Submitted 2 May, 2013;
originally announced May 2013.
-
Liquid films with high surface modulus moving in tubes: dynamic wetting film and jumpy motion
Authors:
Isabelle Cantat,
Benjamin Dollet
Abstract:
We investigate the motion through a wet tube of transverse soap films, or lamellae, of high surface dilatationnal modulus. Combining local thickness and velocity measurements in the wetting film, we reveal a zone of several centimeters in length, the dynamic wetting film, which is significantly influenced by a moving lamella. The dependence of this influence length on lamella velocity and wetting…
▽ More
We investigate the motion through a wet tube of transverse soap films, or lamellae, of high surface dilatationnal modulus. Combining local thickness and velocity measurements in the wetting film, we reveal a zone of several centimeters in length, the dynamic wetting film, which is significantly influenced by a moving lamella. The dependence of this influence length on lamella velocity and wetting film thickness provides a discrimination among several possible surfactant minimal models. A spectacular jumpy mode of unsteady motion of a lamella is also evidenced.
△ Less
Submitted 15 November, 2011;
originally announced November 2011.
-
Lateral migration of a 2D vesicle in unbounded Poiseuille flow
Authors:
B. Kaoui,
G. H. Ristow,
I. Cantat,
C. Misbah,
W. Zimmermann
Abstract:
The migration of a suspended vesicle in an unbounded Poiseuille flow is investigated numerically in the low Reynolds number limit. We consider the situation without viscosity contrast between the interior of the vesicle and the exterior. Using the boundary integral method we solve the corresponding hydrodynamic flow equations and track explicitly the vesicle dynamics in two dimensions. We find t…
▽ More
The migration of a suspended vesicle in an unbounded Poiseuille flow is investigated numerically in the low Reynolds number limit. We consider the situation without viscosity contrast between the interior of the vesicle and the exterior. Using the boundary integral method we solve the corresponding hydrodynamic flow equations and track explicitly the vesicle dynamics in two dimensions. We find that the interplay between the nonlinear character of the Poiseuille flow and the vesicle deformation causes a cross-streamline migration of vesicles towards the center of the Poiseuille flow. This is in a marked contrast with a result [L.G. Leal, Ann. Rev. Fluid Mech. 12, 435(1980)]according to which the droplet moves away from the center (provided there is no viscosity contrast between the internal and the external fluids). The migration velocity is found to increase with the local capillary number (defined by the time scale of the vesicle relaxation towards its equilibrium shape times the local shear rate), but reaches a plateau above a certain value of the capillary number. This plateau value increases with the curvature of the parabolic flow profile. We present scaling laws for the migration velocity.
△ Less
Submitted 17 October, 2007;
originally announced October 2007.
-
Experimental growth law for bubbles in a "wet" 3D liquid foam
Authors:
Jérôme Lambert,
Rajmund Mokso,
Isabelle Cantat,
Peter Cloetens,
Renaud Delannay,
James A. Glazier,
François Graner
Abstract:
We used X-ray tomography to characterize the geometry of all bubbles in a liquid foam of average liquid fraction $φ_l\approx 17 %$ and to follow their evolution, measuring the normalized growth rate $\mathcal{G}=V^{-{1/3}}\frac{dV} {dt}$ for 7000 bubbles. While $\mathcal{G}$ does not depend only on the number of faces of a bubble, its average over $f-$faced bubbles scales as $G_f\sim f-f_0$ for…
▽ More
We used X-ray tomography to characterize the geometry of all bubbles in a liquid foam of average liquid fraction $φ_l\approx 17 %$ and to follow their evolution, measuring the normalized growth rate $\mathcal{G}=V^{-{1/3}}\frac{dV} {dt}$ for 7000 bubbles. While $\mathcal{G}$ does not depend only on the number of faces of a bubble, its average over $f-$faced bubbles scales as $G_f\sim f-f_0$ for large $f$s at all times. We discuss the dispersion of $\mathcal{G}$ and the influence of $V$ on $\mathcal{G}$.
△ Less
Submitted 28 February, 2007;
originally announced February 2007.
-
Mechanical probing of liquid foam aging
Authors:
Isabelle Cantat,
Olivier Pitois
Abstract:
We present experimental results on the Stokes experiment performed in a 3D dry liquid foam. The system is used as a rheometric tool : from the force exerted on a 1cm glass bead, plunged at controlled velocity in the foam in a quasi static regime, local foam properties are probed around the sphere. With this original and simple technique, we show the possibility of measuring the foam shear modulu…
▽ More
We present experimental results on the Stokes experiment performed in a 3D dry liquid foam. The system is used as a rheometric tool : from the force exerted on a 1cm glass bead, plunged at controlled velocity in the foam in a quasi static regime, local foam properties are probed around the sphere. With this original and simple technique, we show the possibility of measuring the foam shear modulus, the gravity drainage rate and the evolution of the bubble size during coarsening.
△ Less
Submitted 19 September, 2006;
originally announced September 2006.
-
Viscous force exerted on a foam at a solid boundary : influence of the liquid fraction and of the bubble size
Authors:
Emmanuel Terriac,
Janine Etrillard,
Isabelle Cantat
Abstract:
We study experimentally the pressure drop needed to push a bubble train in a millimetric channel, as a function of the velocity. For dry liquid foams, the influence of the amount of liquid and of the bubble size is pointed out and we predict theoretically that this influence is closely related to the power law obtained for the force/velocity relation. This model is in fair agreement with our exp…
▽ More
We study experimentally the pressure drop needed to push a bubble train in a millimetric channel, as a function of the velocity. For dry liquid foams, the influence of the amount of liquid and of the bubble size is pointed out and we predict theoretically that this influence is closely related to the power law obtained for the force/velocity relation. This model is in fair agreement with our experimental data and provides a new interpretation of previous results.
△ Less
Submitted 19 September, 2006;
originally announced September 2006.
-
Stokes experiment in a liquid foam
Authors:
Isabelle Cantat,
Olivier Pitois
Abstract:
The paper reports on the quasi-static steady flow of a dry liquid foam around a fixed spherical bead, few times larger than the typical bubble size. The force exerted on the bead is recorded with a precision and a time resolution large enough to show the succession of elastic loading of the foam, separated by sudden force drops. The foam structure is observed by direct light transmission, synchr…
▽ More
The paper reports on the quasi-static steady flow of a dry liquid foam around a fixed spherical bead, few times larger than the typical bubble size. The force exerted on the bead is recorded with a precision and a time resolution large enough to show the succession of elastic loading of the foam, separated by sudden force drops. The foam structure is observed by direct light transmission, synchronized with the force measurement, thus allowing to correlate the plastic events with the force variations. Scaling laws for the force signal as a function of the bubble size are detailed and interpreted with a simple elasto-plastic model. The spatial distribution of the plasticity is strongly localized in the first bubbles layers around the bead and the average size of bubble rearrangements increases with the corresponding force jump amplitude.
△ Less
Submitted 19 September, 2006;
originally announced September 2006.
-
Experimental evidence of flow destabilization in a 2D bidisperse foam
Authors:
Isabelle Cantat,
Celine Poloni,
Renaud Delannay
Abstract:
Liquid foam flows in a Hele-Shaw cell were investigated. The plug flow obtained for a monodisperse foam is strongly perturbed in the presence of bubbles whose size is larger than the average bubble size by an order of magnitude at least. The large bubbles migrate faster than the mean flow above a velocity threshold which depends on its size. We evidence experimentally this new instability and, i…
▽ More
Liquid foam flows in a Hele-Shaw cell were investigated. The plug flow obtained for a monodisperse foam is strongly perturbed in the presence of bubbles whose size is larger than the average bubble size by an order of magnitude at least. The large bubbles migrate faster than the mean flow above a velocity threshold which depends on its size. We evidence experimentally this new instability and, in case of a single large bubble, we compare the large bubble velocity with the prediction deduced from scaling arguments. In case of a bidisperse foam, an attractive interaction between large bubbles induces segregation and the large bubbles organize themselves in columns oriented along the flow. These results allow to identify the main ingredients governing 2D polydisperse foam flows.
△ Less
Submitted 7 April, 2006;
originally announced April 2006.
-
Dissipative flows of 2D foams
Authors:
Isabelle Cantat,
Renaud Delannay
Abstract:
We analyze the flow of a liquid foam between two plates separated by a gap of the order of the bubble size (2D foam). We concentrate on the salient features of the flow that are induced by the presence, in an otherwise monodisperse foam, of a single large bubble whose size is one order of magnitude larger than the average size. We describe a model suited for numerical simulations of flows of 2D…
▽ More
We analyze the flow of a liquid foam between two plates separated by a gap of the order of the bubble size (2D foam). We concentrate on the salient features of the flow that are induced by the presence, in an otherwise monodisperse foam, of a single large bubble whose size is one order of magnitude larger than the average size. We describe a model suited for numerical simulations of flows of 2D foams made up of a large number of bubbles. The numerical results are successfully compared to analytical predictions based on scaling arguments and on continuum medium approximations. When the foam is pushed inside the cell at a controlled rate, two basically different regimes occur: a plug flow is observed at low flux whereas, above a threshold, the large bubble migrates faster than the mean flow. The detailed characterization of the relative velocity of the large bubble is the essential aim of the present paper. The relative velocity values, predicted both from numerical and from analytical calculations that are discussed here in great detail, are found to be in fair agreement with experimental results.
△ Less
Submitted 21 July, 2005;
originally announced July 2005.
-
Dynamics and Topological Aspects of a Reconstructed Two-Dimensional Foam Time Series Using Potts Model on a Pinned Lattice
Authors:
Igor F. Vasconcelos,
Isabelle Cantat,
James A. Glazier
Abstract:
We discuss a method to reconstruct an approximate two-dimensional foam structure from an incomplete image using the extended Potts mode with a pinned lattice we introduced in a previous paper. The initial information consists of the positions of the vertices only. We locate the centers of the bubbles using the Euclidean distance-map construction and assign at each vertex position a continuous pi…
▽ More
We discuss a method to reconstruct an approximate two-dimensional foam structure from an incomplete image using the extended Potts mode with a pinned lattice we introduced in a previous paper. The initial information consists of the positions of the vertices only. We locate the centers of the bubbles using the Euclidean distance-map construction and assign at each vertex position a continuous pinning field with a potential falling off as $1/r$. We nucleate a bubble at each center using the extended Potts model and let the structure evolve under the constraint of scaled target areas until the bubbles contact each other. The target area constraint and pinning centers prevent further coarsening. We then turn the area constraint off and let the edges relax to a minimum energy configuration. The result is a reconstructed structure very close to the simulation. We repeated this procedure for various stages of the coarsening of the same simulated foam and investigated the simulation and reconstruction dynamics, topology and area distribution, finding that they agree to good accuracy.
△ Less
Submitted 30 June, 2003; v1 submitted 15 March, 2003;
originally announced March 2003.
-
Vesicle propulsion in haptotaxis : a local model
Authors:
Isabelle Cantat,
Chaouqi Misbah,
Yukio Saito
Abstract:
We study theoretically vesicle locomotion due to haptotaxis.
Haptotaxis is referred to motion induced by an adhesion gradient on a substrate. The problem is solved within a local approximation where a Rayleigh-type dissipation is adopted. The dynamical model is akin to the Rousse model for polymers. A powerful gauge-field invariant formulation is used to solve a dynamical model which includes…
▽ More
We study theoretically vesicle locomotion due to haptotaxis.
Haptotaxis is referred to motion induced by an adhesion gradient on a substrate. The problem is solved within a local approximation where a Rayleigh-type dissipation is adopted. The dynamical model is akin to the Rousse model for polymers. A powerful gauge-field invariant formulation is used to solve a dynamical model which includes a kind of dissipation due to bond breaking/restoring with the substrate. For a stationary situation where the vesicle acquires a constant drift velocity, we formulate the propulsion problem in terms of a nonlinear eigenvalue (the a priori unknown drift velocity) one of Barenblat-Zeldovitch type. A counting argument shows that the velocity belongs to a discrete set. For a relatively tense vesicle, we provide an analytical expression for the drift velocity as a function of relevant parameters. We find good agreement with the full numerical solution. Despite the oversimplification of the model it allows the identification of a relevant quantity, namely the adhesion length, which turns out to be crucial also in the nonlocal model in the presence of hydrodynamics, a situation on which we have recently reported [I. Cantat, and C. Misbah, Phys. Rev. Lett. {\bf 83}, 235 (1999)] and which constitutes the subject of a forthcoming extensive study.
△ Less
Submitted 11 February, 2000;
originally announced February 2000.