-
Local origin of the visco-elasticity of a millimetric elementary foam
Authors:
Adrien Bussonnière,
Isabelle Cantat
Abstract:
Liquid foam exhibits surprisingly high viscosity, higher than each of its phases. This dissipation enhancement has been rationalized by invoking either a geometrical confinement of the shear in the liquid phase, or the influence of the interface viscosity. However, a precise localization of the dissipation, and its mechanism, at the bubble scale is still lacking. To this aim, we simultaneously mon…
▽ More
Liquid foam exhibits surprisingly high viscosity, higher than each of its phases. This dissipation enhancement has been rationalized by invoking either a geometrical confinement of the shear in the liquid phase, or the influence of the interface viscosity. However, a precise localization of the dissipation, and its mechanism, at the bubble scale is still lacking. To this aim, we simultaneously monitored the evolution of the local flow velocity, film thickness and surface tension of a five films assembly, induced by different controlled deformations. These measurements allow us to build local constitutive relations for this foam elementary brick. We first show that, for our millimetric foam films, the main part of the film has a purely elastic, reversible behavior, thus ruling out the interface viscosity to explain the observed dissipation. We then highlight a generic frustration at the menisci, controlling the interface transfer between neighbor films and resulting in the localization of a bulk shear flow close to the menisci. A model accounting for surfactant transport in these small sheared regions is developed. It is in good agreement with the experiment, and demonstrate that most of the dissipation is localized in these domains. The length of these sheared regions, determined by the physico-chemical properties of the solution, sets a transition between a large bubble regime in which the films are mainly stretched and compressed, and a small bubble regime in which they are sheared. Finally, we discuss the parameter range where a model of foam viscosity could be built on the basis of these local results.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Cavitation nuclei regeneration in water-particle suspension
Authors:
Adrien Bussonnière,
Qingxia Liu,
Peichun Amy Tsai
Abstract:
Bubble nucleation in water induced by boiling, gas supersaturation or cavitation usually originates from pre-existing gas cavities trapped into solid defects. Even though the destabilization of such gas pockets, called nuclei, has been extensively studied, little is known on the nuclei dynamic. Here, nuclei of water-particle suspensions are excited by acoustic cavitation, and their dynamic is inve…
▽ More
Bubble nucleation in water induced by boiling, gas supersaturation or cavitation usually originates from pre-existing gas cavities trapped into solid defects. Even though the destabilization of such gas pockets, called nuclei, has been extensively studied, little is known on the nuclei dynamic. Here, nuclei of water-particle suspensions are excited by acoustic cavitation, and their dynamic is investigated by monitoring the cavitation probability over several thousand pulses. A stable and reproducible cavitation probability emerges after a few thousand pulses and depends on particle concentration, hydrophobicity, and dissolved gas content. Our observations indicate that a stable nuclei distribution is reached at a later-time, different from previously reported nuclei depletion in early-time. This apparent paradox is elucidated by varying the excitation rate, where the cavitation activity increases with the repetition period, indicating that the nuclei depletion is balanced by spontaneous nucleation or growth of nuclei. A model of this self-supporting generation of nuclei suggests an origin from dissolved gas adsorption on surfaces. The method developed can be utilized to further understand the spontaneous formation and distribution of nano-sized bubbles on heterogeneous surfaces.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Dynamical coupling between connected foam films by interface transfer across the menisci
Authors:
Adrien Bussonnière,
Evgenia Shabalina,
Xavier Ah-Thon,
Mickaël Le Fur,
Isabelle Cantat
Abstract:
The highly confined flow of the liquid phase, trapped between the gas bubbles, is at the origin of the large effective viscosity of the liquid foams. Despite the industrial relevance of this complex fluid, the foam viscosity remains difficult to predict, because of the lack of flow characterization at the bubble scale. Using an original deformable frame, we provide the first experimental evidence…
▽ More
The highly confined flow of the liquid phase, trapped between the gas bubbles, is at the origin of the large effective viscosity of the liquid foams. Despite the industrial relevance of this complex fluid, the foam viscosity remains difficult to predict, because of the lack of flow characterization at the bubble scale. Using an original deformable frame, we provide the first experimental evidence of the interface transfer between a compressed film (resp. a stretched film) and its first neighbour, across their common meniscus. We measure this transfer velocity, which is a key boundary condition for local flows in foams. We also show the dramatic film thickness variation induced by this interface transfer, which may play an important role in the film thickness distribution of a 3D foam sample.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
Sound of Interfacial Flows: Unraveling the Forces Shaping Fast Capillary Flows using their Acoustic Signature
Authors:
Adrien Bussonnière,
Arnaud Antkowiak,
François Ollivier,
Michaël Baudoin,
Régis Wunenburger
Abstract:
Many familiar events feature a distinctive sound: paper crumpling or tearing, squeaking doors, drumming rain or boiling water. Such characteristic sounds actually carry a profusion of informations about the fleeting physical processes at the root of acoustic emission, which appears appealing especially in situations precluding direct or in-situ measurements, such as e.g. the rupture of micron-thic…
▽ More
Many familiar events feature a distinctive sound: paper crumpling or tearing, squeaking doors, drumming rain or boiling water. Such characteristic sounds actually carry a profusion of informations about the fleeting physical processes at the root of acoustic emission, which appears appealing especially in situations precluding direct or in-situ measurements, such as e.g. the rupture of micron-thick liquid sheet. Here we report on such a link between fast interfacial hydrodynamics and sound. The acoustic emission of a bursting soap bubble is captured by means of antennae and deciphered with the conceptual framework of aeroacoustics. This reveals that capillary forces, thin-film hydrodynamics, but also out-of-equilibrium surfactants dynamics all shape the capillary burst sound. Whereas ultra-fast imagery only captures the shapes of flows, the acoustic signature radiated by hydrodynamical forces offers a timely complement for it allows a direct experimental access to these dynamical quantities.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Synthesis of anisotropic swirling surface acoustic waves by inverse filter, towards integrated generators of acoustical vortices
Authors:
Antoine Riaud,
Jean-Louis Thomas,
Eric Charron,
Adrien Bussonnière,
Olivier Bou Matar,
Michaël Baudoin
Abstract:
From radio-electronics signal analysis to biological samples actuation, surface acoustic waves (SAW) are involved in a multitude of modern devices. Despite this versatility, SAW transducers developed up to date only authorize the synthesis of the most simple standing or progressive waves such as plane and focused waves. In particular, acoustical integrated sources able to generate acoustical vorti…
▽ More
From radio-electronics signal analysis to biological samples actuation, surface acoustic waves (SAW) are involved in a multitude of modern devices. Despite this versatility, SAW transducers developed up to date only authorize the synthesis of the most simple standing or progressive waves such as plane and focused waves. In particular, acoustical integrated sources able to generate acoustical vortices (the analogue of optical vortices) are missing. In this work, we propose a flexible tool based on inverse filter technique and arrays of SAW transducers enabling the synthesis of prescribed complex wave patterns at the surface of anisotropic media. The potential of this setup is illustrated by the synthesis of a 2D analog of 3D acoustical vortices, namely "swirling surface acoustic waves". Similarly to their 3D counterpart, they appear as concentric structures of bright rings with a phase singularity in their center resulting in a central dark spot. Swirling SAW can be useful in fragile sensors whose neighborhood needs vigorous actuation, and may also serve as integrated transducers for acoustical vortices. Since these waves are essential to fine acoustical tweezing, swirling SAW may become the cornerstone of future micrometric devices for contactless manipulation.
△ Less
Submitted 28 April, 2015; v1 submitted 26 April, 2015;
originally announced April 2015.
-
Cell detachment and label-free cell sorting using modulated surface acoustic waves (SAW) in droplet-based microfluidics
Authors:
Adrien Bussonnière,
Yannick Miron,
Michael Baudoin,
Olivier Bou-Matar,
Michel Grandbois,
Paul Charette,
Alan Renaudin
Abstract:
We present a droplet-based surface acoustic wave (SAW) system designed to viably detach biological cells from a surface and sort cell types based on differences in adhesion strength (adhesion contrast), without the need to label cells with molecular markers. The system uses modulated SAW to generate pulsatile flows in the droplets and efficiently detach the cells, thereby minimizing SAW excitation…
▽ More
We present a droplet-based surface acoustic wave (SAW) system designed to viably detach biological cells from a surface and sort cell types based on differences in adhesion strength (adhesion contrast), without the need to label cells with molecular markers. The system uses modulated SAW to generate pulsatile flows in the droplets and efficiently detach the cells, thereby minimizing SAW excitation power and exposure time. As a proof-of-principle, the system is shown to efficiently sort HEK 293 from A7r5 cells based on adhesion contrast. Results are obtained in minutes with sorting purity and efficiency reaching 97 % and 95 %, respectively.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.