-
Measurement of Proton-Induced Reactions on Lanthanum from 55--200 MeV by Stacked-Foil Activation
Authors:
Jonathan T. Morrell,
Ellen M. O'Brien,
Michael Skulski,
Andrew S. Voyles,
Dmitri G. Medvedev,
Veronika Mocko,
Lee A. Bernstein,
C. Etienne Vermeulen
Abstract:
Cerium-134 is an isotope desired for applications as a chemical analogue to the promising therapeutic radionuclide $^{225}$Ac, for use in bio-distribution assays as an in vivo generator of the short-lived positron-emitting isotope $^{134}$La. In the 50-100 MeV energy range relevant to the production of $^{134}$Ce by means of high-energy proton bombardment of lanthanum, existing cross section data…
▽ More
Cerium-134 is an isotope desired for applications as a chemical analogue to the promising therapeutic radionuclide $^{225}$Ac, for use in bio-distribution assays as an in vivo generator of the short-lived positron-emitting isotope $^{134}$La. In the 50-100 MeV energy range relevant to the production of $^{134}$Ce by means of high-energy proton bombardment of lanthanum, existing cross section data are discrepant and have gaps at important energies. To address these deficiencies, a series of 17 $^{139}$La foils (99.919% natural abundance) were irradiated in two stacked-target experiments: one at the LANL's Isotope Production Facility with an incident proton energy of 100 MeV, and a second at BNL's Brookhaven Linac Isotope Producer with an incident proton energy of 200 MeV - a complete energy range spanning approximately 55-200 MeV. Cross sections are reported for 30 products of $^{139}$La(p,x) reactions (representing up to 55% of the total non-elastic cross section), in addition to 24 residual products measured in the $^{nat}$Cu and $^{nat}$Ti foils that were used as proton flux monitors. The measured production cross sections for $^{139}$La reactions were compared to literature data as well as default calculations from the nuclear reaction modeling codes TALYS, EMPIRE and ALICE, as well as the TENDL-2023 library. The default calculations typically exhibited poor predictive capability, due to the complexity of multiple interacting physics models in this energy range, and deficiencies in preequilibrium reaction modeling. Building upon previous efforts to evaluate proton-induced reactions in this energy range, a parameter adjustment procedure was performed upon the optical model and the two-component exciton model using the TALYS-2.0 code. This resulted in an improvement in $^{139}$La(p,x) cross sections for applications including isotope production, over default predictions.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
FPGA Technology Mapping Using Sketch-Guided Program Synthesis
Authors:
Gus Henry Smith,
Ben Kushigian,
Vishal Canumalla,
Andrew Cheung,
Steven Lyubomirsky,
Sorawee Porncharoenwase,
René Just,
Gilbert Louis Bernstein,
Zachary Tatlock
Abstract:
FPGA technology mapping is the process of implementing a hardware design expressed in high-level HDL (hardware design language) code using the low-level, architecture-specific primitives of the target FPGA. As FPGAs become increasingly heterogeneous, achieving high performance requires hardware synthesis tools that better support mapping to complex, highly configurable primitives like digital sign…
▽ More
FPGA technology mapping is the process of implementing a hardware design expressed in high-level HDL (hardware design language) code using the low-level, architecture-specific primitives of the target FPGA. As FPGAs become increasingly heterogeneous, achieving high performance requires hardware synthesis tools that better support mapping to complex, highly configurable primitives like digital signal processors (DSPs). Current tools support DSP mapping via handwritten special-case mapping rules, which are laborious to write, error-prone, and often overlook mapping opportunities. We introduce Lakeroad, a principled approach to technology mapping via sketch-guided program synthesis. Lakeroad leverages two techniques -- architecture-independent sketch templates and semantics extraction from HDL -- to provide extensible technology mapping with stronger correctness guarantees and higher coverage of mapping opportunities than state-of-the-art tools. Across representative microbenchmarks, Lakeroad produces 2--3.5$\times$ the number of optimal mappings compared to proprietary state-of-the-art tools and 6--44$\times$ the number of optimal mappings compared to popular open-source tools, while also providing correctness guarantees not given by any other tool.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Global Characterization of a Laser-Generated Neutron Source
Authors:
D. P. Higginson,
R. Lelièvre,
L. Vassura,
M. M. Gugiu,
M. Borghesi,
L. A. Bernstein,
D. L. Bleuel,
B. L. Goldblum,
A. Green,
F. Hannachi,
S. Kar,
S. Kisyov,
L. Quentin,
M. Schroer,
M. Tarisien,
O. Willi,
P. Antici,
F. Negoita,
A. Allaoua,
J. Fuchs
Abstract:
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons…
▽ More
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons produced using the Titan laser at the Jupiter Laser Facility (Livermore, USA), where protons were accelerated from 23 $μm$ thick plastic targets and directed onto a LiF converter to produce neutrons. For this purpose, several diagnostics were used to measure these neutron emissions, such as CR-39, activation foils, Time-of-Flight detectors and direct measurement of $^{7}$Be residual activity in the LiF converters. The use of these different, independently operating diagnostics enables comparison of the various measurements performed to provide a robust characterization. These measurements led to a neutron yield of $2.10^{9}$ neutrons per shot with a modest angular dependence, close to that simulated.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Analysis of the 3.2-3.3 $μ$m Interstellar Absorption Feature on Three Milky Way Sightlines
Authors:
L. S. Bernstein,
T. R. Geballe
Abstract:
We report new analyses of spectra of the $3.2-3.3~μ$m absorption feature observed in the diffuse interstellar medium toward three Milky Way sources: 2MASS $J17470898-2829561$ (2M1747) and the Quintuplet Cluster, both located in the Galactic center, and Cygnus OB2-12. The $3.2-3.3~μ$m interval coincides with the CH-stretching region for compact polycyclic aromatic hydrocarbons (PAHs). We focus on t…
▽ More
We report new analyses of spectra of the $3.2-3.3~μ$m absorption feature observed in the diffuse interstellar medium toward three Milky Way sources: 2MASS $J17470898-2829561$ (2M1747) and the Quintuplet Cluster, both located in the Galactic center, and Cygnus OB2-12. The $3.2-3.3~μ$m interval coincides with the CH-stretching region for compact polycyclic aromatic hydrocarbons (PAHs). We focus on the 2M1747 spectrum. Its published optical depth spectrum contains residual telluric transmission features, which arise from the 0.06 difference in mean airmasses between the observations of the source and its telluric standard star. We corrected the published spectrum by adding the airmass residual optical depth spectrum. The corrected spectrum is well fit by a superposition of four Gaussians. The absorption spectra of the other two sources were also fit by four Gaussians, with similar central wavelengths, widths, and relative peak opacities. We associate the three longer wavelength Gaussians covering the $3.23-3.31~μ$m interval with compact PAHs in positive, neutral, and negative charge states. We identify the shortest wavelength Gaussian, near 3.21 $μ$m, with irregularly-shaped PAHs. Constraints imposed by spectral smoothness on the corrected 2M1747 spectrum, augmented by a PAH cluster formation model for post-asymptotic giant branch stars, suggests that $> 99$\%\ of the PAHs in the diffuse interstellar medium reside in small clusters. This study supports the PAH hypothesis, and suggests that a family of primarily compact PAHs with a C$_{66}$H$_{20}$ (circumvalene) parent is consistent with the observed mid-infrared and ultraviolet interstellar absorption spectrum.
△ Less
Submitted 15 February, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Secondary Neutron Production from Thick Target Deuteron Breakup
Authors:
Jonathan T. Morrell,
Andrew S. Voyles,
Jon C. Batchelder,
Joshua A. Brown,
Lee A. Bernstein
Abstract:
Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have bee…
▽ More
Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have been measured on a thick beryllium target at $ε_d=33$ and 40 MeV, using both time-of-flight and activation techniques. We have also introduced a simple hybrid model for the double-differential deuteron breakup cross section, applicable in the $ε_d=10$--$100$ MeV energy range on light ($Z\leq 6$) targets. This model features four empirical parameters that have been fit to reproduce experimental breakup measurements on beryllium targets, using the method of least-squares. It was shown that these parameters extrapolate well to higher energies, and to other low-Z target materials. We also include optimization of the parameters that modify the Kalbach systematics for compound and pre-equilibrium reactions, in order to better reproduce the experimental data for beryllium targets at large angles.
△ Less
Submitted 30 November, 2022;
originally announced December 2022.
-
Formal Semantics for the Halide Language
Authors:
Alex Reinking,
Gilbert Louis Bernstein,
Jonathan Ragan-Kelley
Abstract:
We present the first formalization and metatheory of language soundness for a user-schedulable language, the widely used array processing language Halide. User-schedulable languages strike a balance between abstraction and control in high-performance computing by separating the specification of what a program should compute from a schedule for how to compute it. In the process, they make a novel l…
▽ More
We present the first formalization and metatheory of language soundness for a user-schedulable language, the widely used array processing language Halide. User-schedulable languages strike a balance between abstraction and control in high-performance computing by separating the specification of what a program should compute from a schedule for how to compute it. In the process, they make a novel language soundness claim: the result of a program should always be the same, regardless of how it is scheduled. This soundness guarantee is tricky to provide in the presence of schedules that introduce redundant recomputation and computation on uninitialized data, rather than simply reordering statements. In addition, Halide ensures memory safety through a compile-time bounds inference engine that determines safe sizes for every buffer and loop in the generated code, presenting a novel challenge: formalizing and analyzing a language specification that depends on the results of unreliable program synthesis algorithms. Our formalization has revealed flaws and led to improvements in the practical Halide system, and we believe it provides a foundation for the design of new languages and tools that apply programmer-controlled scheduling to other domains.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Deep Learning with Coherent VCSEL Neural Networks
Authors:
Zaijun Chen,
Alexander Sludds,
Ronald Davis,
Ian Christen,
Liane Bernstein,
Tobias Heuser,
Niels Heermeier,
James A. Lott,
Stephan Reitzenstein,
Ryan Hamerly,
Dirk Englund
Abstract:
Deep neural networks (DNNs) are reshaping the field of information processing. With their exponential growth challenging existing electronic hardware, optical neural networks (ONNs) are emerging to process DNN tasks in the optical domain with high clock rates, parallelism and low-loss data transmission. However, to explore the potential of ONNs, it is necessary to investigate the full-system perfo…
▽ More
Deep neural networks (DNNs) are reshaping the field of information processing. With their exponential growth challenging existing electronic hardware, optical neural networks (ONNs) are emerging to process DNN tasks in the optical domain with high clock rates, parallelism and low-loss data transmission. However, to explore the potential of ONNs, it is necessary to investigate the full-system performance incorporating the major DNN elements, including matrix algebra and nonlinear activation. Existing challenges to ONNs are high energy consumption due to low electro-optic (EO) conversion efficiency, low compute density due to large device footprint and channel crosstalk, and long latency due to the lack of inline nonlinearity. Here we experimentally demonstrate an ONN system that simultaneously overcomes all these challenges. We exploit neuron encoding with volume-manufactured micron-scale vertical-cavity surface-emitting laser (VCSEL) transmitter arrays that exhibit high EO conversion (<5 attojoule/symbol with $V_π$=4 mV), high operation bandwidth (up to 25 GS/s), and compact footprint (<0.01 mm$^2$ per device). Photoelectric multiplication allows low-energy matrix operations at the shot-noise quantum limit. Homodyne detection-based nonlinearity enables nonlinear activation with instantaneous response. The full-system energy efficiency and compute density reach 7 femtojoules per operation (fJ/OP) and 25 TeraOP/(mm$^2\cdot$ s), both representing a >100-fold improvement over state-of-the-art digital computers, with substantially several more orders of magnitude for future improvement. Beyond neural network inference, its feature of rapid weight updating is crucial for training deep learning models. Our technique opens an avenue to large-scale optoelectronic processors to accelerate machine learning tasks from data centers to decentralized edge devices.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Netcast: Low-Power Edge Computing with WDM-defined Optical Neural Networks
Authors:
Ryan Hamerly,
Alexander Sludds,
Saumil Bandyopadhyay,
Zaijun Chen,
Zhizhen Zhong,
Liane Bernstein,
Dirk Englund
Abstract:
This paper analyzes the performance and energy efficiency of Netcast, a recently proposed optical neural-network architecture designed for edge computing. Netcast performs deep neural network inference by dividing the computational task into two steps, which are split between the server and (edge) client: (1) the server employs a wavelength-multiplexed modulator array to encode the network's weigh…
▽ More
This paper analyzes the performance and energy efficiency of Netcast, a recently proposed optical neural-network architecture designed for edge computing. Netcast performs deep neural network inference by dividing the computational task into two steps, which are split between the server and (edge) client: (1) the server employs a wavelength-multiplexed modulator array to encode the network's weights onto an optical signal in an analog time-frequency basis, and (2) the client obtains the desired matrix-vector product through modulation and time-integrated detection. The simultaneous use of wavelength multiplexing, broadband modulation, and integration detection allows large neural networks to be run at the client by effectively pushing the energy and memory requirements back to the server. The performance and energy efficiency are fundamentally limited by crosstalk and detector noise, respectively. We derive analytic expressions for these limits and perform numerical simulations to verify these bounds.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Single-Shot Optical Neural Network
Authors:
Liane Bernstein,
Alexander Sludds,
Christopher Panuski,
Sivan Trajtenberg-Mills,
Ryan Hamerly,
Dirk Englund
Abstract:
As deep neural networks (DNNs) grow to solve increasingly complex problems, they are becoming limited by the latency and power consumption of existing digital processors. For improved speed and energy efficiency, specialized analog optical and electronic hardware has been proposed, however, with limited scalability (input vector length $K$ of hundreds of elements). Here, we present a scalable, sin…
▽ More
As deep neural networks (DNNs) grow to solve increasingly complex problems, they are becoming limited by the latency and power consumption of existing digital processors. For improved speed and energy efficiency, specialized analog optical and electronic hardware has been proposed, however, with limited scalability (input vector length $K$ of hundreds of elements). Here, we present a scalable, single-shot-per-layer analog optical processor that uses free-space optics to reconfigurably distribute an input vector and integrated optoelectronics for static, updatable weighting and the nonlinearity -- with $K \approx 1,000$ and beyond. We experimentally test classification accuracy of the MNIST handwritten digit dataset, achieving 94.7% (ground truth 96.3%) without data preprocessing or retraining on the hardware. We also determine the fundamental upper bound on throughput ($\sim$0.9 exaMAC/s), set by the maximum optical bandwidth before significant increase in error. Our combination of wide spectral and spatial bandwidths in a CMOS-compatible system enables highly efficient computing for next-generation DNNs.
△ Less
Submitted 22 June, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Delocalized Photonic Deep Learning on the Internet's Edge
Authors:
Alexander Sludds,
Saumil Bandyopadhyay,
Zaijun Chen,
Zhizhen Zhong,
Jared Cochrane,
Liane Bernstein,
Darius Bunandar,
P. Ben Dixon,
Scott A. Hamilton,
Matthew Streshinsky,
Ari Novack,
Tom Baehr-Jones,
Michael Hochberg,
Manya Ghobadi,
Ryan Hamerly,
Dirk Englund
Abstract:
Advances in deep neural networks (DNNs) are transforming science and technology. However, the increasing computational demands of the most powerful DNNs limit deployment on low-power devices, such as smartphones and sensors -- and this trend is accelerated by the simultaneous move towards Internet-of-Things (IoT) devices. Numerous efforts are underway to lower power consumption, but a fundamental…
▽ More
Advances in deep neural networks (DNNs) are transforming science and technology. However, the increasing computational demands of the most powerful DNNs limit deployment on low-power devices, such as smartphones and sensors -- and this trend is accelerated by the simultaneous move towards Internet-of-Things (IoT) devices. Numerous efforts are underway to lower power consumption, but a fundamental bottleneck remains due to energy consumption in matrix algebra, even for analog approaches including neuromorphic, analog memory and photonic meshes. Here we introduce and demonstrate a new approach that sharply reduces energy required for matrix algebra by doing away with weight memory access on edge devices, enabling orders of magnitude energy and latency reduction. At the core of our approach is a new concept that decentralizes the DNN for delocalized, optically accelerated matrix algebra on edge devices. Using a silicon photonic smart transceiver, we demonstrate experimentally that this scheme, termed Netcast, dramatically reduces energy consumption. We demonstrate operation in a photon-starved environment with 40 aJ/multiply of optical energy for 98.8% accurate image recognition and <1 photon/multiply using single photon detectors. Furthermore, we show realistic deployment of our system, classifying images with 3 THz of bandwidth over 86 km of deployed optical fiber in a Boston-area fiber network. Our approach enables computing on a new generation of edge devices with speeds comparable to modern digital electronics and power consumption that is orders of magnitude lower.
△ Less
Submitted 1 April, 2022; v1 submitted 10 March, 2022;
originally announced March 2022.
-
The 3.3 $μ$m Infrared Emission Feature: Observational and Laboratory Constraints on Its Carrier
Authors:
Alan T. Tokunaga,
Lawrence S. Bernstein
Abstract:
We examine the self-consistency of laboratory and observational data for potential carriers of the 3.3 $μ$m infrared emission feature (IEF), a member of the ubiquitous family of strong interstellar IEFs at 3.3, 3.4, 6.2, 7.7, 8.6, 11.2, and 12.7 $μ$m. Previous studies have shown that most Galactic sources (reflection nebulae, HII regions, and planetary nebulae) show 3.3 $μ$m IEFs displaying simila…
▽ More
We examine the self-consistency of laboratory and observational data for potential carriers of the 3.3 $μ$m infrared emission feature (IEF), a member of the ubiquitous family of strong interstellar IEFs at 3.3, 3.4, 6.2, 7.7, 8.6, 11.2, and 12.7 $μ$m. Previous studies have shown that most Galactic sources (reflection nebulae, HII regions, and planetary nebulae) show 3.3 $μ$m IEFs displaying similar central wavelengths, full widths at half maximum, and profiles. Our study is focused on the band profile designated as Class A, the most prevalent of four classes of observed band profiles. In contrast to the observations, laboratory spectra for gas phase polycyclic aromatic hydrocarbons (PAHs), the widely assumed carriers of the IEFs, display central wavelength shifts, widths, and profiles that vary with temperature and PAH size. We present an extrapolation of the laboratory band shifts and widths for smaller PAHs ($\le$32 carbon atoms) to the larger PAHs ($>$50 carbon atoms) that are thought to be the IEF carriers. The extrapolation leads to tight constraints on the sizes of the putative PAH carriers. Reconciling the observations with the implications of the laboratory spectra pose a significant challenge to the PAH and other IEF carrier hypotheses.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Preparation and Characterization of Thin Arsenic Targets for Stacked-Target Experiments
Authors:
Andrew S. Voyles,
Morgan B. Fox,
Jonathan T. Morrell,
Michael P. Zach,
Evan K. Still,
Lee A. Bernstein,
Wesley D. Frey,
Burton J. Mehciz
Abstract:
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m).…
▽ More
Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m). Examination of electrodeposit surface morphology by scanning electron microscopy and microanalysis was performed to investigate the uniformity of produced targets. Brief studies of plating growth dynamics and structural properties through cyclic voltammetry were also undertaken. Alternative target fabrication approaches by vapor deposition and electrodeposition from a deep eutectic solvent were additionally conducted. We further introduce a non-destructive characterization method for thin targets by neutron activation, which is independent of neutron flux shape, environmental factors, and source geometry, while correcting for any potential scatter or absorption effects.
△ Less
Submitted 15 February, 2024; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Measurement and Modeling of Proton-Induced Reactions on Arsenic from 35 to 200 MeV
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Arjan J. Koning,
Amanda M. Lewis,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}…
▽ More
$^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}$Se have insufficient nuclear data for efficient production using regional 100-200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the $^{72}$Se/$^{72}$As PET generator system via $^{75}$As(p,x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for $^{75}$As(p,4n)$^{72}$Se starting from threshold. Additional focus was given to report the first measurements of $^{75}$As(p,x)$^{68}$Ge and bolster an already robust production capability for the highly valuable $^{68}$Ge/$^{68}$Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from $^{75}$As, Cu, and Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the TALYS code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and pre-equilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power.
△ Less
Submitted 11 June, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model
Authors:
Morgan B. Fox,
Andrew S. Voyles,
Jonathan T. Morrell,
Lee A. Bernstein,
Amanda M. Lewis,
Arjan J. Koning,
Jon C. Batchelder,
Eva R. Birnbaum,
Cathy S. Cutler,
Dmitri G. Medvedev,
Francois M. Nortier,
Ellen M. O'Brien,
Christiaan Vermeulen
Abstract:
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction m…
▽ More
A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed among the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer (E$_p$=200 MeV) and the Los Alamos Isotope Production Facility (E$_p$=100 MeV) to measure $^{93}$Nb(p,x) cross sections between 50 and 200 MeV. The measured cross-section results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. We developed a standardized procedure that determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. The primary focus of the procedure was to determine the best parametrization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend toward a relative decrease for internal transition rates at intermediate proton energies (E$_p$=20-60 MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production.
△ Less
Submitted 5 April, 2021; v1 submitted 24 October, 2020;
originally announced October 2020.
-
Neutron Spectroscopy for Pulsed Beams with Frame Overlap using a Double Time-of-Flight Technique
Authors:
K. P. Harrig,
B. L. Goldblum,
J. A. Brown,
D. L. Bleuel,
L. A. Bernstein,
J. Bevins,
M. Harasty,
T. A. Laplace,
E. F. Matthews
Abstract:
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV…
▽ More
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV deuterons on a beryllium target in the cyclotron vault. The breakup spectral shape was deduced from a dTOF measurement using an array of EJ-309 organic liquid scintillators. Simulation of the neutron detection efficiency of the scintillator array was performed using both GEANT4 and MCNP6. The efficiency-corrected spectral shape was normalized using a foil activation technique to obtain the energy-dependent flux of the neutron beam at zero degrees with respect to the incoming deuteron beam. The dTOF neutron spectrum was compared to spectra obtained using HEPROW and GRAVEL pulse height spectrum unfolding techniques. While the unfolding and dTOF results exhibit some discrepancies in shape, the integrated flux values agree within two standard deviations. This method obviates neutron time-of-flight spectroscopy challenges posed by pulsed beams with frame overlap and opens new opportunities for pulsed white neutron source facilities.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
FIER: Software for analytical modeling of delayed gamma-ray spectra
Authors:
E. F. Matthews,
B. L. Goldblum,
L. A. Bernstein,
B. J. Quiter,
J. A. Brown,
W. Younes,
J. T. Burke,
S. W. Padgett,
J. J. Ressler,
A. P. Tonchev
Abstract:
A new software package, the Fission Induced Electromagnetic Response (FIER) code, has been developed to analytically predict delayed $γ$-ray spectra following fission. FIER uses evaluated nuclear data and solutions to the Bateman equations to calculate the time-dependent populations of fission products and their decay daughters resulting from irradiation of a fissionable isotope. These populations…
▽ More
A new software package, the Fission Induced Electromagnetic Response (FIER) code, has been developed to analytically predict delayed $γ$-ray spectra following fission. FIER uses evaluated nuclear data and solutions to the Bateman equations to calculate the time-dependent populations of fission products and their decay daughters resulting from irradiation of a fissionable isotope. These populations are then used in the calculation of $γ$-ray emission rates to obtain the corresponding delayed $γ$-ray spectra. FIER output was compared to experimental data obtained by irradiation of a $^{235}$U sample in the Godiva critical assembly. This investigation illuminated discrepancies in the input nuclear data libraries, showcasing the usefulness of FIER as a tool to address nuclear data deficiencies through comparison with experimental data. FIER provides traceability between $γ$-ray emissions and their contributing nuclear species, decay chains, and parent fission fragments, yielding a new capability for the nuclear science community.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Proton Light Yield in Organic Scintillators using a Double Time-of-Flight Technique
Authors:
J. A. Brown,
B. L. Goldblum,
T. A. Laplace,
K. P. Harrig,
L. A. Bernstein,
D. L. Bleuel,
W. Younes,
D. Reyna,
E. Brubaker,
P. Marleau
Abstract:
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad…
▽ More
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad energy range. Using a deuteron breakup neutron source at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory and an array of organic scintillators, the proton light yield of EJ-301 and EJ-309, commercially available organic liquid scintillators from Eljen Technology, were measured via a double time-of-flight technique. The light yield was determined using a kinematically over-constrained system in the proton energy range of 1-20 MeV. The effect of pulse integration length on the magnitude and shape of the proton light yield relation was also explored. This work enables accurate simulation of the performance of advanced neutron detectors and supports the development of next-generation neutron imaging systems.
△ Less
Submitted 4 October, 2020;
originally announced October 2020.
-
Freely scalable and reconfigurable optical hardware for deep learning
Authors:
Liane Bernstein,
Alexander Sludds,
Ryan Hamerly,
Vivienne Sze,
Joel Emer,
Dirk Englund
Abstract:
As deep neural network (DNN) models grow ever-larger, they can achieve higher accuracy and solve more complex problems. This trend has been enabled by an increase in available compute power; however, efforts to continue to scale electronic processors are impeded by the costs of communication, thermal management, power delivery and clocking. To improve scalability, we propose a digital optical neur…
▽ More
As deep neural network (DNN) models grow ever-larger, they can achieve higher accuracy and solve more complex problems. This trend has been enabled by an increase in available compute power; however, efforts to continue to scale electronic processors are impeded by the costs of communication, thermal management, power delivery and clocking. To improve scalability, we propose a digital optical neural network (DONN) with intralayer optical interconnects and reconfigurable input values. The near path-length-independence of optical energy consumption enables information locality between a transmitter and arbitrarily arranged receivers, which allows greater flexibility in architecture design to circumvent scaling limitations. In a proof-of-concept experiment, we demonstrate optical multicast in the classification of 500 MNIST images with a 3-layer, fully-connected network. We also analyze the energy consumption of the DONN and find that optical data transfer is beneficial over electronics when the spacing of computational units is on the order of >10 micrometers.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
An Integral Experiment on Polyethylene Using Radiative Capture in Indium Foils in a High Flux D-D Neutron Generator
Authors:
Nnaemeka Nnamani,
Karl van Bibber,
Lee A Bernstein,
Jasmina L Vujic,
Jonathan T. Morrell
Abstract:
The Department of Nuclear Engineering, University of California Berkeley built a D-D neutron generator called the High Flux Neutron Generator (HFNG). It operates in the range of 100-125 keV of accelerating voltage. The generator produces neutron current of about 10^8 per second. These neutrons have energies between 2.2-2.8 MeV. We report here the results of a measurement of the scattered vs unscat…
▽ More
The Department of Nuclear Engineering, University of California Berkeley built a D-D neutron generator called the High Flux Neutron Generator (HFNG). It operates in the range of 100-125 keV of accelerating voltage. The generator produces neutron current of about 10^8 per second. These neutrons have energies between 2.2-2.8 MeV. We report here the results of a measurement of the scattered vs unscattered neutron fluence on polyethylene determined via neutron activation of multiple natural indium foils from a D-D neutron generator. Both the angle-integrated spectrum and the angle differential results are consistent with the predictions of the Monte Carlo N-Particle Transport (MCNP) code, using the ENDF/B-VII.1. This supports shielding calculations in the fast energy region with high density polyethylene (HDPE). To the best of our knowledge no integral benchmark experiment has been performed on polyethylene using D(D,n)alpha neutron spectrum.
△ Less
Submitted 11 February, 2020;
originally announced February 2020.
-
The Baghdad Atlas: A relational database of inelastic neutron-scattering $(n,n'γ)$ data
Authors:
A. M. Hurst,
L. A. Bernstein,
T. Kawano,
A. M. Lewis,
K. Song
Abstract:
A relational database has been developed based on the original ($n,n'γ$) work carried out by A. M. Demidov $et$ $al$., at the Nuclear Research Institute in Baghdad, Iraq [$"Atlas$ $of$ $Gamma$-$Ray$ $Spectra$ $from$ $the$ $Inelastic$ $Scattering$ $of$ $Reactor$ $Fast$ $Neutrons"$, Nuclear Research Institute, Baghdad, Iraq (Moscow, Atomizdat 1978)] for 105 independent measurements comprising 76 ele…
▽ More
A relational database has been developed based on the original ($n,n'γ$) work carried out by A. M. Demidov $et$ $al$., at the Nuclear Research Institute in Baghdad, Iraq [$"Atlas$ $of$ $Gamma$-$Ray$ $Spectra$ $from$ $the$ $Inelastic$ $Scattering$ $of$ $Reactor$ $Fast$ $Neutrons"$, Nuclear Research Institute, Baghdad, Iraq (Moscow, Atomizdat 1978)] for 105 independent measurements comprising 76 elemental samples of natural composition and 29 isotopically-enriched samples. The information from this Atlas includes: $γ$-ray energies and relative intensities; nuclide and level data corresponding to the residual nucleus and meta data associated with the target sample that allows for the extraction of the flux-weighted ($n,n'γ$) cross sections for a given transition relative to a defined value. The optimized angular-distribution-corrected fast-neutron flux-weighted partial $γ$-ray cross section for the production of the 846.8-keV $2^{+}_{1} \rightarrow 0^{+}_{\rm gs}$ $γ$-ray transition in $^{56}$Fe, determined to be $\langle σ_γ \rangle = 143(29)$ mb, is used for this purpose. However, different values for the adopted cross section can be readily implemented to accommodate user preference based on revised determinations of this quantity. The Atlas ($n,n'γ$) data has been compiled into a series of CSV-style ASCII data sets and a suite of Python scripts have been developed to build and install the database locally. The database can then be accessed directly through the SQLite engine, or using alternative methods such as the Jupyter Notebook Python-browser interface. Several examples exploiting different interaction methodologies are distributed with the complete software package.
△ Less
Submitted 15 January, 2021; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Proton-induced reactions on Fe, Cu, & Ti from threshold to 55 MeV
Authors:
Andrew S. Voyles,
Amanda M. Lewis,
Jonathan T. Morrell,
M. Shamsuzzoha Basunia,
Lee A. Bernstein,
Jonathan W. Engle,
Stephen A. Graves,
Eric F. Matthews
Abstract:
Theoretical models often differ significantly from measured data in their predictions of the magnitude of nuclear reactions that produce radionuclides for medical, research, and national security applications. In this paper, we compare a priori predictions from several state-of-the-art reaction modeling packages (CoH, EMPIRE, TALYS, and ALICE) to cross sections measured using the stacked-target ac…
▽ More
Theoretical models often differ significantly from measured data in their predictions of the magnitude of nuclear reactions that produce radionuclides for medical, research, and national security applications. In this paper, we compare a priori predictions from several state-of-the-art reaction modeling packages (CoH, EMPIRE, TALYS, and ALICE) to cross sections measured using the stacked-target activation method. The experiment was performed using the LBNL 88-Inch Cyclotron with beams of 25 and 55 MeV protons on a stack of iron, copper, and titanium foils. 34 excitation functions were measured for 4 < Ep < 55 MeV, including the first measurement of the independent cross sections for natFe(p,x) 49,51Cr, 51,52m,52g,56Mn, and 58m,58gCo. All of the models failed to reproduce the isomer-to-ground state ratio for reaction channels at compound and pre-compound energies, suggesting issues in modeling the deposition or distribution of angular momentum in these residual nuclei.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Measurement of $^{139}$La(p,x) Cross Sections from 35-60 MeV by Stacked-Target Activation
Authors:
Jonathan T. Morrell,
Andrew S. Voyles,
M. S. Basunia,
Jon C. Batchelder,
Eric F. Matthews,
Lee A. Bernstein
Abstract:
A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide…
▽ More
A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide $^{225}$Ac, $^{134}$Ce is desirable for in vivo applications of bio-distribution assays for this emerging radio-pharmaceutical. The results of this measurement were compared to the nuclear model codes TALYS, EMPIRE and ALICE (using default parameters), which showed significant deviation from the measured values.
△ Less
Submitted 1 August, 2019; v1 submitted 9 July, 2019;
originally announced July 2019.
-
Restricted spin-range correction in the Oslo Method: The example of nuclear level density and $γ$-ray strength function from $^{239}\mathrm{Pu}(\mathrm{d,p}γ)^{240}\mathrm{Pu}$
Authors:
F. Zeiser,
G. M. Tveten,
G. Potel,
A. C. Larsen,
M. Guttormsen,
T. A. Laplace,
S. Siem,
D. L. Bleuel,
B. L. Goldblum,
L. A. Bernstein,
F. L. Bello Garrote,
L. Crespo Campo,
T. K. Eriksen,
A. Görgen,
K. Hadynska-Klek,
V. W. Ingeberg,
J. E. Midtbø,
E. Sahin,
T. Tornyi,
A. Voinov,
M. Wiedeking,
J. Wilson
Abstract:
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and in…
▽ More
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and intrinsic levels. This is a challenge for the Oslo Method as it can have a significant impact on the extracted NLD and $γ$SF. We have developed an iterative approach to ensure consistent results even for cases with a large spin-parity mismatch, in which we couple Green's Function Transfer calculations of the spin-parity dependent population cross-section to the nuclear decay code RAINIER. The resulting $γ$SF shows a pronounced enhancement between 2-4 MeV that is consistent with the location of the low-energy orbital $M1$ scissors mode.
△ Less
Submitted 25 July, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Impact of restricted spin-ranges in the Oslo Method: The example of (d,p)$^{240}\mathrm{Pu}$
Authors:
F. Zeiser,
G. Potel,
G. M. Tveten,
A. C. Larsen,
M. Guttormsen,
T. A. Laplace,
S. Siem,
D. L. Bleuel,
B. L. Goldblum,
L. A. Bernstein,
F. L. Bello Garrote,
L. Crespo Campo,
T. K. Eriksen,
A. Görgen,
K. Hadynska-Klek,
J. E. Midtbø,
T. Renstrøm,
E. Sahin,
T. Tornyi,
A. Voinov,
M. Wiedeking
Abstract:
In this paper we present the first systematic analysis of the impact of the populated vs. intrinsic spin distribution on the nuclear level density and $γ$-ray strength function retrieved through the Oslo Method. We illustrate the effect of the spin distribution on the recently performed $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ experiment using a 12 MeV deuteron beam performed at the Oslo Cyc…
▽ More
In this paper we present the first systematic analysis of the impact of the populated vs. intrinsic spin distribution on the nuclear level density and $γ$-ray strength function retrieved through the Oslo Method. We illustrate the effect of the spin distribution on the recently performed $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ experiment using a 12 MeV deuteron beam performed at the Oslo Cyclotron Lab. In the analysis we couple state-of-the-art calculations for the populated spin-distributions with the Monte-Carlo nuclear decay code RAINIER to compare Oslo Method results to the known input. We find that good knowledge of the populated spin distribution is crucial and show that the populated distribution has a significant impact on the extracted nuclear level density and $γ$-ray strength function for the $^{239}\mathrm{Pu}$(d,p$γ$)$^{240}\mathrm{Pu}$ case.
△ Less
Submitted 11 February, 2019; v1 submitted 8 February, 2019;
originally announced February 2019.
-
Large-Scale Optical Neural Networks based on Photoelectric Multiplication
Authors:
Ryan Hamerly,
Liane Bernstein,
Alexander Sludds,
Marin Soljačić,
Dirk Englund
Abstract:
Recent success in deep neural networks has generated strong interest in hardware accelerators to improve speed and energy consumption. This paper presents a new type of photonic accelerator based on coherent detection that is scalable to large ($N \gtrsim 10^6$) networks and can be operated at high (GHz) speeds and very low (sub-aJ) energies per multiply-and-accumulate (MAC), using the massive spa…
▽ More
Recent success in deep neural networks has generated strong interest in hardware accelerators to improve speed and energy consumption. This paper presents a new type of photonic accelerator based on coherent detection that is scalable to large ($N \gtrsim 10^6$) networks and can be operated at high (GHz) speeds and very low (sub-aJ) energies per multiply-and-accumulate (MAC), using the massive spatial multiplexing enabled by standard free-space optical components. In contrast to previous approaches, both weights and inputs are optically encoded so that the network can be reprogrammed and trained on the fly. Simulations of the network using models for digit- and image-classification reveal a "standard quantum limit" for optical neural networks, set by photodetector shot noise. This bound, which can be as low as 50 zJ/MAC, suggests performance below the thermodynamic (Landauer) limit for digital irreversible computation is theoretically possible in this device. The proposed accelerator can implement both fully-connected and convolutional networks. We also present a scheme for back-propagation and training that can be performed in the same hardware. This architecture will enable a new class of ultra-low-energy processors for deep learning.
△ Less
Submitted 18 May, 2019; v1 submitted 12 November, 2018;
originally announced December 2018.
-
Radiative-capture cross sections for the $^{139}$La($n,γ$) reactionusing thermal neutrons and structural properties of $^{140}$La
Authors:
A. M. Hurst,
A. Sweet,
B. L. Goldblum,
R. B. Firestone,
M. S. Basunia,
L. A. Bernstein,
Zs. Revay,
L. Szentmiklosi,
T. Belgya,
J. E. Escher,
I. Harsanyi,
M. Krticka,
B. W. Sleaford,
J. Vujic
Abstract:
A set of prompt partial $γ$-ray production cross sections from thermal neutron-capture were measured for the $^{139}$La($n,γ$) reaction using a guided beam of subthermal (thermal and cold) neutrons incident upon a $^{\rm nat}$La$_{2}$O$_{3}$ target at the Prompt Gamma Activation Analysis facility of the Budapest Research Reactor. Absolute $^{140}$La cross sections were determined relative to the w…
▽ More
A set of prompt partial $γ$-ray production cross sections from thermal neutron-capture were measured for the $^{139}$La($n,γ$) reaction using a guided beam of subthermal (thermal and cold) neutrons incident upon a $^{\rm nat}$La$_{2}$O$_{3}$ target at the Prompt Gamma Activation Analysis facility of the Budapest Research Reactor. Absolute $^{140}$La cross sections were determined relative to the well-known comparator $^{35}$Cl($n,γ$) cross sections from the irradiation of a stoichiometric $^{\rm nat}$LaCl$_{3}$ sample. The total cross section for radiative thermal neutron-capture on $^{139}$La from the sum of experimentally measured cross sections observed to directly feed the $^{140}$La ground state was determined to be $σ_{0}^{\rm expt} = 8.58(50)$ b. To assess completeness of the decay scheme and as a consistency check, the measured cross sections for transitions feeding the ground state from levels below a critical energy of $E_{c} = 285$ keV were combined with a modeled contribution accounting for ground-state feeding from the quasicontinuum to arrive at a total cross section of $σ_{0} = 9.36(74)$ b. In addition, a neutron-separation energy of $S_{n} = 5161.005(21)$ keV was determined from a least-squares fit of the measured primary $γ$-ray energies to the low-lying levels of the $^{140}$La decay scheme. Furthermore, several nuclear structure improvements are proposed for the decay scheme. The measured cross-section and separation-energy results are comparable to earlier measurements of these quantities.
△ Less
Submitted 26 October, 2018;
originally announced October 2018.
-
Parameter Optimization and Uncertainty Analysis of FREYA for Spontaneous Fission
Authors:
Jackson Van Dyke,
Lee Bernstein,
Ramona Vogt
Abstract:
Background: The complete event fission simulation code FREYA is used to study correlations in fission. To make the best possible simulations, FREYA one must find the optimized values of the five physics-based parameters which characterize the events produced by FREYA. So far this has been done only empirically or by brute force computational techniques. Purpose: We seek to develop a method of para…
▽ More
Background: The complete event fission simulation code FREYA is used to study correlations in fission. To make the best possible simulations, FREYA one must find the optimized values of the five physics-based parameters which characterize the events produced by FREYA. So far this has been done only empirically or by brute force computational techniques. Purpose: We seek to develop a method of parameter optimization for FREYA that would include uncertainty quantification and an analysis of the correlations between the parameters. Methods: We focus on spontaneous fission as a simpler test case of the method. We first check the results of previous optimizations for $^{252}$Cf(sf) and then go on to develop a simulated annealing approach to optimize the parameters. Although $^{252}$Cf(sf) has the most measured observables, we are able to apply the technique to all spontaneously fissioning isotopes in the current version of FREYA. Results: We find optimal values of the five FREYA parameters, with uncertainties, for all isotopes studied. Our results are compared with available data. The parameter values are physically reasonable and in accord with intuition, even in cases where the data for optimization are sparse to non-existent. Conclusions: The simulated annealing method provides a way to determine the best parameters for the phenomenologically-successful fission model FREYA. We have developed an algorithm that can be updated to include additional isotopes or more data sets for the current isotopes as they become available.
△ Less
Submitted 8 January, 2019; v1 submitted 14 September, 2018;
originally announced September 2018.
-
Excitation functions for (p,x) reactions of niobium in the energy range of E$_{\text{p}}$ = 40-90 MeV
Authors:
Andrew S. Voyles,
Lee A. Bernstein,
Eva R. Birnbaum,
Jonathan W. Engle,
Stephen A. Graves,
Toshihiko Kawano,
Amanda M. Lewis,
Francois M. Nortier
Abstract:
A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) rea…
▽ More
A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions between 40-90 MeV, as well as 5 independent measurements of isomer branching ratios, are reported. These are useful in medical and basic science radionuclide productions at intermediate energies. The $^{\text{nat}}$Cu(p,x)$^{56}$Co, $^{\text{nat}}$Cu(p,x)$^{62}$Zn, and $^{\text{nat}}$Cu(p,x)$^{65}$Zn reactions were used to determine proton fluence, and all activities were quantified using HPGe spectrometry. Variance minimization techniques were employed to reduce systematic uncertainties in proton energy and fluence, improving the reliability of these measurements. The measured cross sections are shown to be in excellent agreement with literature values, and have been measured with improved precision compared with previous measurements. This work also reports the first measurement of the $^{\text{nat}}$Nb(p,x)$^{82\text{m}}$Rb reaction, and of the independent cross sections for $^{\text{nat}}$Cu(p,x)$^{52\text{g}}$Mn and $^{\text{nat}}$Nb(p,x)$^{85\text{g}}$Y in the 40-90 MeV region. The effects of $^{\text{nat}}$Si(p,x)$^{22,24}$Na contamination, arising from silicone adhesive in the Kapton tape used to encapsulate the aluminum monitor foils, is also discussed as a cautionary note to future stacked-target cross section measurements. \emph{A priori} predictions of the reaction modeling codes CoH, EMPIRE, and TALYS are compared with experimentally measured values and used to explore the differences between codes for the $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions.
△ Less
Submitted 21 June, 2018; v1 submitted 18 April, 2018;
originally announced April 2018.
-
Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology
Authors:
Mauricio Ayllon,
Parker A. Adams,
Joseph D. Bauer,
Jon C. Batchelder,
Tim A. Becker,
Lee A. Bernstein,
Su-Ann Chong,
Jay James,
Leo E. Kirsch,
Ka-Ngo Leung,
Eric F. Matthews,
Jonathan T. Morrell,
Paul R. Renne,
Andrew M. Rogers,
Daniel Rutte,
Andrew S. Voyles,
Karl Van Bibber,
Cory S. Waltz
Abstract:
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near futu…
▽ More
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm2/s). The generator's maximum neutron flux at this irradiation position is 2.58e7 n/cm2/s +/- 5% (approximately 3e8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG.
△ Less
Submitted 9 April, 2018; v1 submitted 9 March, 2018;
originally announced March 2018.
-
The State-of-Play of Anomalous Microwave Emission (AME) Research
Authors:
Clive Dickinson,
Y. Ali-Haïmoud,
A. Barr,
E. S. Battistelli,
A. Bell,
L. Bernstein,
S. Casassus,
K. Cleary,
B. T. Draine,
R. Génova-Santos,
S. E. Harper,
B. Hensley,
J. Hill-Valler,
Thiem Hoang,
F. P. Israel,
L. Jew,
A. Lazarian,
J. P. Leahy,
J. Leech,
C. H. López-Caraballo,
I. McDonald,
E. J. Murphy,
T. Onaka,
R. Paladini,
M. W. Peel
, et al. (8 additional authors not shown)
Abstract:
Anomalous Microwave Emission (AME) is a component of diffuse Galactic radiation observed at frequencies in the range $\approx 10$-60 GHz. AME was first detected in 1996 and recognised as an additional component of emission in 1997. Since then, AME has been observed by a range of experiments and in a variety of environments. AME is spatially correlated with far-IR thermal dust emission but cannot b…
▽ More
Anomalous Microwave Emission (AME) is a component of diffuse Galactic radiation observed at frequencies in the range $\approx 10$-60 GHz. AME was first detected in 1996 and recognised as an additional component of emission in 1997. Since then, AME has been observed by a range of experiments and in a variety of environments. AME is spatially correlated with far-IR thermal dust emission but cannot be explained by synchrotron or free-free emission mechanisms, and is far in excess of the emission contributed by thermal dust emission with the power-law opacity consistent with the observed emission at sub-mm wavelengths. Polarization observations have shown that AME is very weakly polarized ($\lesssim 1$%). The most natural explanation for AME is rotational emission from ultra-small dust grains ("spinning dust"), first postulated in 1957. Magnetic dipole radiation from thermal fluctuations in the magnetization of magnetic grain materials may also be contributing to the AME, particularly at higher frequencies ($\gtrsim 50$ GHz). AME is also an important foreground for Cosmic Microwave Background analyses. This paper presents a review and the current state-of-play in AME research, which was discussed in an AME workshop held at ESTEC, The Netherlands, June 2016.
△ Less
Submitted 26 February, 2018; v1 submitted 22 February, 2018;
originally announced February 2018.
-
Understanding the Low-Energy Enhancement of the $γ$-ray Strength Function of $^{56}$Fe
Authors:
M. D. Jones,
A. O. Macchiavelli,
M. Wiedeking,
L. A. Bernstein,
H. L. Crawford,
C. M. Campbell,
R. M. Clark,
M. Cromaz,
P. Fallon,
I. Y. Lee,
M. Salathe,
A. Wiens,
A. D. Ayangeakaa,
D. L. Bleuel,
S. Bottoni,
M. P. Carpenter,
H. M. Davids,
J. Elson,
A. Görgen,
M. Guttormsen,
R. V. F. Janssens,
J. E. Kinnison,
L. Kirsch,
A. C. Larsen,
T. Lauritsen
, et al. (5 additional authors not shown)
Abstract:
A model-independent technique was used to determine the $γ$-ray Strength Function ($γ$SF) of $^{56}$Fe down to $γ$-ray energies less than 1 MeV for the first time with GRETINA using the $(p,p')$ reaction at 16 MeV. No difference was observed in the energy dependence of the $γ$SF built on $2^{+}$ and $4^{+}$ final states, supporting the Brink hypothesis. In addition, angular distribution and polari…
▽ More
A model-independent technique was used to determine the $γ$-ray Strength Function ($γ$SF) of $^{56}$Fe down to $γ$-ray energies less than 1 MeV for the first time with GRETINA using the $(p,p')$ reaction at 16 MeV. No difference was observed in the energy dependence of the $γ$SF built on $2^{+}$ and $4^{+}$ final states, supporting the Brink hypothesis. In addition, angular distribution and polarization measurements were performed. The angular distributions are consistent with dipole radiation. The polarization results show a small bias towards magnetic character in the region of the enhancement.
△ Less
Submitted 29 January, 2018;
originally announced January 2018.
-
RAINIER: A Simulation Tool for Distributions of Excited Nuclear States and Cascade Fluctuations
Authors:
L. E. Kirsch,
L. A. Bernstein
Abstract:
A new code has been developed named RAINIER that simulates the $γ$-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted to $γ$-ray…
▽ More
A new code has been developed named RAINIER that simulates the $γ$-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted to $γ$-ray decay from no more than two initial states such as de-excitation following thermal neutron capture. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to $γ$-ray decay, but do not go beyond the use of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution $γ$-ray spectra from reactions that populate a wide range of initial states.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Energy dependence of the prompt $γ$-ray emission from the $(d,p)$-induced fission of $^{234}\mathrm{U}^{*}$ and $^{240}\mathrm{Pu}^{*}$
Authors:
S. J. Rose,
F. Zeiser,
J. N. Wilson,
A. Oberstedt,
S. Oberstedt,
S. Siem,
G. M. Tveten,
L. A. Bernstein,
D. L. Bleuel,
J. A. Brown,
L. Crespo Campo,
F. Giacoppo,
A. Görgen,
M. Guttormsen,
K. Hadyńska,
A. Hafreager,
T. W. Hagen,
M. Klintefjord,
T. A. Laplace,
A. C. Larsen,
T. Renstrøm,
E. Sahin,
C. Schmitt,
T. G. Tornyi,
M. Wiedeking
Abstract:
Prompt fission $γ$-rays are responsible for approximately 5\% of the total energy released in fission, and therefore important to understand when modelling nuclear reactors. In this work we present prompt $γ$-ray emission characteristics in fission, for the first time as a function of the nuclear excitation energy of the fissioning system. Emitted $γ$-ray spectra were measured, and $γ$-ray multipl…
▽ More
Prompt fission $γ$-rays are responsible for approximately 5\% of the total energy released in fission, and therefore important to understand when modelling nuclear reactors. In this work we present prompt $γ$-ray emission characteristics in fission, for the first time as a function of the nuclear excitation energy of the fissioning system. Emitted $γ$-ray spectra were measured, and $γ$-ray multiplicities and average and total $γ$ energies per fission were determined for the $^{233}$U(d,pf) reaction for excitation energies between 4.8 and 10 MeV, and for the $^{239}$Pu(d,pf) reaction between 4.5 and 9 MeV. The spectral characteristics show no significant change as a function of excitation energy above the fission barrier, despite the fact that an extra $\sim$5 MeV of energy is potentially available in the excited fragments for $γ$-decay. The measured results are compared to model calculations made for prompt $γ$-ray emission with the fission model code GEF. Further comparison with previously obtained results from thermal neutron induced fission is made to characterize possible differences arising from using the surrogate (d,p) reaction.
△ Less
Submitted 6 July, 2017;
originally announced July 2017.
-
Measurement of the $^{64}$Zn,$^{47}$Ti(n,p) Cross Sections using a DD Neutron Generator for Medical Isotope Studies
Authors:
Andrew Voyles,
M. S. Basunia,
Jon Batchelder,
Joseph Bauer,
Tim Becker,
Lee Bernstein,
Eric Matthews,
Paul Renne,
Daniel Rutte,
Mauricio Unzueta,
Karl van Bibber
Abstract:
Cross sections for the $^{47}$Ti(n,p)$^{47}$Sc and $^{64}$Zn(n,p)$^{64}$Cu reactions have been measured for quasi-monoenergetic DD neutrons produced by the UC Berkeley High Flux Neutron Generator (HFNG). The HFNG is a compact neutron generator designed as a "flux-trap" that maximizes the probability that a neutron will interact with a sample loaded into a specific, central location. The study was…
▽ More
Cross sections for the $^{47}$Ti(n,p)$^{47}$Sc and $^{64}$Zn(n,p)$^{64}$Cu reactions have been measured for quasi-monoenergetic DD neutrons produced by the UC Berkeley High Flux Neutron Generator (HFNG). The HFNG is a compact neutron generator designed as a "flux-trap" that maximizes the probability that a neutron will interact with a sample loaded into a specific, central location. The study was motivated by interest in the production of $^{47}$Sc and $^{64}$Cu as emerging medical isotopes. The cross sections were measured in ratio to the $^{113}$In(n,n')$^{113m}$In and $^{115}$In(n,n')$^{115m}$In inelastic scattering reactions on co-irradiated indium samples. Post-irradiation counting using an HPGe and LEPS detectors allowed for cross section determination to within 5% uncertainty. The $^{64}$Zn(n,p)$^{64}$Cu cross section for 2.76$^{+0.01}_{-0.02}$ MeV neutrons is reported as 49.3 $\pm$ 2.6 mb (relative to $^{113}$In) or 46.4 $\pm$ 1.7 mb (relative to $^{115}$In), and the $^{47}$Ti(n,p)$^{47}$Sc cross section is reported as 26.26 $\pm$ 0.82 mb. The measured cross sections are found to be in good agreement with existing measured values but with lower uncertainty (< 5%), and also in agreement with theoretical values. This work highlights the utility of compact, flux-trap DD-based neutron sources for nuclear data measurements and potentially the production of radionuclides for medical applications.
△ Less
Submitted 7 August, 2017; v1 submitted 27 April, 2017;
originally announced April 2017.
-
A Small Fullerene (C24) may be the Carrier of the 11.2 micron Unidentified Infrared Band
Authors:
L. S. Bernstein,
R. M. Shroll,
D. K. Lynch,
F. O. Clark
Abstract:
We analyze the 11.2 μm unidentified infrared band (UIR) spectrum from NGC 7027 and identify a small fullerene (C24) as a plausible carrier. The blurring effects of lifetime and vibrational anharmonicity broadening obscure the narrower, intrinsic spectral profiles of the UIR band carriers. We use a spectral deconvolution algorithm to remove the blurring, in order to retrieve the intrinsic profile o…
▽ More
We analyze the 11.2 μm unidentified infrared band (UIR) spectrum from NGC 7027 and identify a small fullerene (C24) as a plausible carrier. The blurring effects of lifetime and vibrational anharmonicity broadening obscure the narrower, intrinsic spectral profiles of the UIR band carriers. We use a spectral deconvolution algorithm to remove the blurring, in order to retrieve the intrinsic profile of the UIR band. The shape of the intrinsic profile, a sharp blue peak and an extended red tail, suggests that the UIR band originates from a molecular vibration-rotation band with a blue band head. The fractional area of the band-head feature indicates a spheroidal molecule, implying a non-polar molecule and precluding rotational emission. Its rotational temperature should be well approximated by that measured for non-polar molecular hydrogen, ~825 K for NGC 7027. Using this temperature, and the inferred spherical symmetry, we perform a spectral fit to the intrinsic profile that results in a rotational constant implying C24 as the carrier. We show that the spectroscopic parameters derived for NGC 7027 are consistent with the 11.2 μm UIR bands observed for other objects. We present density functional theory (DFT) calculations for the frequencies and infrared intensities of C24. The DFT results are used to predict a spectral energy distribution (SED) originating from absorption of a 5 eV photon, and characterized by an effective vibrational temperature of 930 K. The C24 SED is consistent with the entire UIR spectrum and is the dominant contributor to the 11.2 and 12.7 μm bands.
△ Less
Submitted 29 January, 2017; v1 submitted 26 January, 2017;
originally announced January 2017.
-
$^{137,138,139}$La($n$, $γ$) cross sections constrained with statistical decay properties of $^{138,139,140}$La nuclei
Authors:
Bonginkosi Vincent Kheswa,
Mathis Wiedeking,
Josh Brown,
Ann-Cecilie Larsen,
Stephane Goriely,
Magne Guttormsen,
Frank L Bello Garrote,
Lee A Bernstein,
Darren L. Bleuel,
Tomas K Eriksen,
Francesca Giacoppo,
Andreas Görgen,
Bethany L Goldblum,
Trine Hagen,
Paul E Koehler,
Malin Klintefjord,
Kgashane L Malatji,
Jørgen E Midtbø,
Hilde-Therese Nyhus,
Paul Papka,
Therese Renstrøm,
Sunniva J Rose,
Eda Sahin,
Sunniva Siem,
Tamás Tornyi
Abstract:
The nuclear level densities and $γ$-ray strength functions of $^{138,139,140}$La were measured using the $^{139}$La($^{3}$He, $α$), $^{139}$La($^{3}$He, $^{3}$He$^\prime$) and $^{139}$La(d, p) reactions. The particle-$γ$ coincidences were recorded with the silicon particle telescope (SiRi) and NaI(Tl) (CACTUS) arrays. In the context of these experimental results, the low-energy enhancement in the…
▽ More
The nuclear level densities and $γ$-ray strength functions of $^{138,139,140}$La were measured using the $^{139}$La($^{3}$He, $α$), $^{139}$La($^{3}$He, $^{3}$He$^\prime$) and $^{139}$La(d, p) reactions. The particle-$γ$ coincidences were recorded with the silicon particle telescope (SiRi) and NaI(Tl) (CACTUS) arrays. In the context of these experimental results, the low-energy enhancement in the A$\sim$140 region is discussed. The $^{137,138,139}$La($n, γ)$ cross sections were calculated at $s$- and $p$-process temperatures using the experimentally measured nuclear level densities and $γ$-ray strength functions. Good agreement is found between $^{139}$La($n, γ)$ calculated cross sections and previous measurements.
△ Less
Submitted 13 January, 2017;
originally announced January 2017.
-
Beam-induced Back-streaming Electron Suppression Analysis for Accelerator Type Neutron Generators
Authors:
Cory Waltz,
Mauricio Ayllon,
Tim Becker,
Lee Bernstein,
Ka-Ngo Leung,
Leo Kirsch,
Paul Renne,
Karl Van Bibber
Abstract:
A facility based on a next-generation, high-flux D-D neutron generator has been commissioned and it is now operational at the University of California, Berkeley. The current generator design produces near monoenergetic 2.45 MeV neutrons at outputs of 10^8 n/s. Calculations provided show that future conditioning at higher currents and voltages will allow for a production rate over 10^10 n/s. A sign…
▽ More
A facility based on a next-generation, high-flux D-D neutron generator has been commissioned and it is now operational at the University of California, Berkeley. The current generator design produces near monoenergetic 2.45 MeV neutrons at outputs of 10^8 n/s. Calculations provided show that future conditioning at higher currents and voltages will allow for a production rate over 10^10 n/s. A significant problem encountered was beam-induced electron backstreaming, that needed to be resolved to achieve meaningful beam currents. Two methods of suppressing secondary electrons resulting from the deuterium beam striking the target were tested: the application of static electric and magnetic fields. Computational simulations of both techniques were done using a finite element analysis in COMSOL Multiphysics. Experimental tests verified these simulation results. The most reliable suppression was achieved via the implementation of an electrostatic shroud with a voltage offset of -800 V relative to the target.
△ Less
Submitted 1 January, 2017;
originally announced January 2017.
-
Nature of low-lying electric dipole resonance excitations in 74Ge
Authors:
D. Negi,
M. Wiedeking,
E. G. Lanza,
E. Litvinova,
A. Vitturi,
R. A. Bark,
L. A. Bernstein,
D. L. Bleuel,
S. Bvumbi,
T. D. Bucher,
B. H. Daub,
T. S. Dinoko,
J. L. Easton,
A. Gorgen,
M. Guttormsen,
P. Jones,
B. V. Kheswa,
N. A. Khumalo,
A. C. Larsen,
E. A. Lawrie,
J. J. Lawrie,
S. N. T. Majola,
L. P. Masiteng,
M. R. Nchodu,
J. Ndayishimye
, et al. (10 additional authors not shown)
Abstract:
Isospin properties of dipole excitations in 74 Ge are investigated using the (α,α'γ) reaction and compared to (γ,γ) data. The results indicate that the dipole excitations in the energy region of 6 to 9 MeV adhere to the scenario of the recently found splitting of the region of dipole excitations into two separated parts: one at low energy, being populated by both isoscalar and isovector probes, an…
▽ More
Isospin properties of dipole excitations in 74 Ge are investigated using the (α,α'γ) reaction and compared to (γ,γ) data. The results indicate that the dipole excitations in the energy region of 6 to 9 MeV adhere to the scenario of the recently found splitting of the region of dipole excitations into two separated parts: one at low energy, being populated by both isoscalar and isovector probes, and the other at high energy, excited only by the electromagnetic probe. Relativistic quasiparticle time blocking approximation (RQTBA) calculations show a reduction in the isoscalar E1 strength with an increase in excitation energy, which is consistent with the measurement.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Completing the nuclear reaction puzzle of the nucleosynthesis of 92Mo
Authors:
G. M. Tveten,
A. Spyrou,
R. Schwengner,
F. Naqvi,
A. C. Larsen,
T. K. Eriksen,
F. L. Bello Garrote,
L. A. Bernstein,
D. L. Bleuel,
L. Crespo Campo,
M. Guttormsen,
F. Giacoppo,
A. Görgen,
T. W. Hagen,
K. Hadynska-Klek,
M. Klintefjord,
B. S. Meyer,
H. T. Nyhus,
T. Renstrøm,
S. J. Rose,
E. Sahin,
S. Siem,
T. G. Tornyi
Abstract:
One of the greatest questions for modern physics to address is how elements heavier than iron are created in extreme, astrophysical environments. A particularly challenging part of that question is the creation of the so-called p-nuclei, which are believed to be mainly produced in some types of supernovae. The lack of needed nuclear data presents an obstacle in nailing down the precise site and as…
▽ More
One of the greatest questions for modern physics to address is how elements heavier than iron are created in extreme, astrophysical environments. A particularly challenging part of that question is the creation of the so-called p-nuclei, which are believed to be mainly produced in some types of supernovae. The lack of needed nuclear data presents an obstacle in nailing down the precise site and astrophysical conditions. In this work, we present for the first time measurements on the nuclear level density and average strength function of $^{92}$Mo. State-of-the-art p-process calculations systematically underestimate the observed solar abundance of this isotope. Our data provide stringent constraints on the $^{91}$Nb$(p,γ)^{92}$Mo reaction rate, which is the last unmeasured reaction in the nucleosynthesis puzzle of $^{92}$Mo. Based on our results, we conclude that the $^{92}$Mo abundance anomaly is not due to the nuclear physics input to astrophysical model calculations.
△ Less
Submitted 21 July, 2016; v1 submitted 23 May, 2016;
originally announced May 2016.
-
Nuclear Data Needs and Capabilities for Applications
Authors:
Lee Bernstein,
David Brown,
Aaron Hurst,
John Kelly,
Filip Kondev,
Elizabeth McCutchan,
Caroline Nesaraja,
Rachel Slaybaugh,
Alejandro Sonzogni
Abstract:
The Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA) was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goals of NDNCA were compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for required measurements. This docum…
▽ More
The Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA) was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goals of NDNCA were compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for required measurements. This document represents the results of the workshop and a compilation of other recent documents assessing nuclear data needs for the above-mentioned applications.
△ Less
Submitted 20 October, 2015;
originally announced November 2015.
-
Statistical properties of $^{243}$Pu, and $^{242}$Pu(n,$γ$) cross section calculation
Authors:
T. A. Laplace,
F. Zeiser,
M. Guttormsen,
A. C. Larsen,
D. L. Bleuel,
L. A. Bernstein,
B. L. Goldblum,
S. Siem,
F. L. Bello Garotte,
J. A. Brown,
L. Crespo Campo,
T. K. Eriksen,
F. Giacoppo,
A. Görgen,
K. Hadyńska-Klȩk,
R. A. Henderson,
M. Klintefjord,
M. Lebois,
T. Renstrøm,
S. J. Rose,
E. Sahin,
T. G. Tornyi,
G. M. Tveten,
A. Voinov,
M. Wiedeking
, et al. (2 additional authors not shown)
Abstract:
The level density and gamma-ray strength function (gammaSF) of 243Pu have been measured in the quasi-continuum using the Oslo method. Excited states in 243Pu were populated using the 242Pu(d,p) reaction. The level density closely follows the constant-temperature level density formula for excitation energies above the pairing gap. The gammaSF displays a double-humped resonance at low energy as also…
▽ More
The level density and gamma-ray strength function (gammaSF) of 243Pu have been measured in the quasi-continuum using the Oslo method. Excited states in 243Pu were populated using the 242Pu(d,p) reaction. The level density closely follows the constant-temperature level density formula for excitation energies above the pairing gap. The gammaSF displays a double-humped resonance at low energy as also seen in previous investigations of actinide isotopes. The structure is interpreted as the scissors resonance and has a centroid of omega_{SR}=2.42(5)MeV and a total strength of B_{SR}=10.1(15)mu_N^2, which is in excellent agreement with sum-rule estimates. The measured level density and gammaSF were used to calculate the 242Pu(n,gamma) cross section in a neutron energy range for which there were previously no measured data.
△ Less
Submitted 1 February, 2016; v1 submitted 5 November, 2015;
originally announced November 2015.
-
Low-energy enhancement in the γ-ray strength functions of $^{73,74}$Ge
Authors:
T. Renstrøm,
H. -T. Nyhus,
H. Utsumoniya,
R. Schwengner,
S. Goriely,
A. C. Larsen,
D. M. Filipescu,
I. Gheorghe,
L. A. Bernstein,
D. L. Bleuel,
T. Glodariu,
A. Görgen,
M. Guttormsen,
T. W. Hagen,
B. V. Kheswa,
Y. -W . Lui,
D. Negi,
I. E. Ruud,
T. Shima,
S. Siem,
K. Takahisa,
O. Tesileanu,
T. G. Tornyi,
G. M. Tveten,
M. Wiedeking
Abstract:
The $γ$-ray strength functions and level densities of $^{73,74}$Ge have been extracted up to the neutron separation energy S$_n$ from particle-$γ$ coincidence data using the Oslo method. Moreover, the $γ$-ray strength function of $^{74}$Ge above S$_n$ has been determined from photo-neutron measurements, hence these two experiments cover the range of E$_γ\approx$ 1-13 MeV for $^{74}$Ge. The obtaine…
▽ More
The $γ$-ray strength functions and level densities of $^{73,74}$Ge have been extracted up to the neutron separation energy S$_n$ from particle-$γ$ coincidence data using the Oslo method. Moreover, the $γ$-ray strength function of $^{74}$Ge above S$_n$ has been determined from photo-neutron measurements, hence these two experiments cover the range of E$_γ\approx$ 1-13 MeV for $^{74}$Ge. The obtained data show that both $^{73,74}$Ge display an increase in strength at low $γ$ energies. The experimental $γ$-ray strength functions are compared with $M1$ strength functions deduced from average $B(M1)$ values calculated within the shell model for a large number of transitions. The observed low-energy enhancements in $^{73,74}$Ge are adopted in the calculations of the $^{72,73}$Ge(n,$γ$) cross sections, where there are no direct experimental data. Calculated reaction rates for more neutron-rich germanium isotopes are shown to be strongly dependent on the presence of the low-energy enhancement.
△ Less
Submitted 18 October, 2015;
originally announced October 2015.
-
Ebb: A DSL for Physical Simulation on CPUs and GPUs
Authors:
Gilbert Louis Bernstein,
Chinmayee Shah,
Crystal Lemire,
Zachary DeVito,
Matthew Fisher,
Philip Levis,
Pat Hanrahan
Abstract:
Designing programming environments for physical simulation is challenging because simulations rely on diverse algorithms and geometric domains. These challenges are compounded when we try to run efficiently on heterogeneous parallel architectures. We present Ebb, a domain-specific language (DSL) for simulation, that runs efficiently on both CPUs and GPUs. Unlike previous DSLs, Ebb uses a three-lay…
▽ More
Designing programming environments for physical simulation is challenging because simulations rely on diverse algorithms and geometric domains. These challenges are compounded when we try to run efficiently on heterogeneous parallel architectures. We present Ebb, a domain-specific language (DSL) for simulation, that runs efficiently on both CPUs and GPUs. Unlike previous DSLs, Ebb uses a three-layer architecture to separate (1) simulation code, (2) definition of data structures for geometric domains, and (3) runtimes supporting parallel architectures. Different geometric domains are implemented as libraries that use a common, unified, relational data model. By structuring the simulation framework in this way, programmers implementing simulations can focus on the physics and algorithms for each simulation without worrying about their implementation on parallel computers. Because the geometric domain libraries are all implemented using a common runtime based on relations, new geometric domains can be added as needed, without specifying the details of memory management, mapping to different parallel architectures, or having to expand the runtime's interface.
We evaluate Ebb by comparing it to several widely used simulations, demonstrating comparable performance to hand-written GPU code where available, and surpassing existing CPU performance optimizations by up to 9$\times$ when no GPU code exists.
△ Less
Submitted 24 February, 2016; v1 submitted 24 June, 2015;
originally announced June 2015.
-
Experimental level densities of atomic nuclei
Authors:
M. Guttormsen,
M. Aiche,
F. L. Bello Garrote,
L. A. Bernstein,
D. L. Bleuel,
Y. Byun,
Q. Ducasse,
T. K. Eriksen,
F. Giacoppo,
A. Görgen,
F. Gunsing,
T. W. Hagen,
B. Jurado,
M. Klintefjord,
A. C. Larsen,
L. Lebois,
B. Leniau,
H. T. Nyhus,
T. Renstrøm,
S. J. Rose,
E. Sahin,
S. Siem,
T. G. Tornyi,
G. M. Tveten,
A. Voinov
, et al. (2 additional authors not shown)
Abstract:
It is almost 80 years since Hans Bethe described the level density as a non-interacting gas of protons and neutrons. In all these years, experimental data were interpreted within this picture of a fermionic gas. However, the renewed interest of measuring level density using various techniques calls for a revision of this description. In particular, the wealth of nuclear level densities measured wi…
▽ More
It is almost 80 years since Hans Bethe described the level density as a non-interacting gas of protons and neutrons. In all these years, experimental data were interpreted within this picture of a fermionic gas. However, the renewed interest of measuring level density using various techniques calls for a revision of this description. In particular, the wealth of nuclear level densities measured with the Oslo method favors the constant-temperature level density over the Fermi-gas picture. From the basis of experimental data, we demonstrate that nuclei exhibit a constant-temperature level density behavior for all mass regions and at least up to the neutron threshold.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Level densities and thermodynamical properties of Pt and Au isotopes
Authors:
F. Giacoppo,
F. L. Bello Garrote,
L. A. Bernstein,
D. L. Bleuel,
T. K. Eriksen,
R. B. Firestone,
A. Görgen,
M. Guttormsen,
T. W. Hagen,
B. V. Kheswa,
M. Klintefjord,
P. E. Koehler,
A. C. Larsen,
H. T. Nyhus,
T. Renstrøm,
E. Sahin,
S. Siem,
T. Tornyi
Abstract:
The nuclear level densities of $^{194-196}$Pt and $^{197,198}$Au below the neutron separation energy have been measured using transfer and scattering reactions. All the level density distributions follow the constant-temperature description. Each group of isotopes is characterized by the same temperature above the energy threshold corresponding to the breaking of the first Cooper pair. A constant…
▽ More
The nuclear level densities of $^{194-196}$Pt and $^{197,198}$Au below the neutron separation energy have been measured using transfer and scattering reactions. All the level density distributions follow the constant-temperature description. Each group of isotopes is characterized by the same temperature above the energy threshold corresponding to the breaking of the first Cooper pair. A constant entropy excess $ΔS=1.9$ and $1.1$ $k_B$ is observed in $^{195}$Pt and $^{198}$Au with respect to $^{196}$Pt and $^{197}$Au, respectively, giving information on the available single-particle level space for the last unpaired valence neutron. The breaking of nucleon Cooper pairs is revealed by sequential peaks in the microcanonical caloric curve.
△ Less
Submitted 28 November, 2014; v1 submitted 26 August, 2014;
originally announced August 2014.
-
Genome-wide scan of 29,141 African Americans finds no evidence of selection since admixture
Authors:
Gaurav Bhatia,
Arti Tandon,
Melinda C. Aldrich,
Christine B. Ambrosone,
Christopher Amos,
Elisa V. Bandera,
Sonja I. Berndt,
Leslie Bernstein,
William J. Blot,
Cathryn H. Bock,
Neil Caporaso,
Graham Casey,
Sandra L. Deming,
W. Ryan Diver,
Susan M. Gapstur,
Elizabeth M. Gillanders,
Curtis C. Harris,
Brian E. Henderson,
Sue A. Ingles,
William Isaacs,
Esther M. John,
Rick A. Kittles,
Emma Larkin,
Lorna H. McNeill,
Robert C. Millikan
, et al. (22 additional authors not shown)
Abstract:
We scanned through the genomes of 29,141 African Americans, searching for loci where the average proportion of African ancestry deviates significantly from the genome-wide average. We failed to find any genome-wide significant deviations, and conclude that any selection in African Americans since admixture is sufficiently weak that it falls below the threshold of our power to detect it using a lar…
▽ More
We scanned through the genomes of 29,141 African Americans, searching for loci where the average proportion of African ancestry deviates significantly from the genome-wide average. We failed to find any genome-wide significant deviations, and conclude that any selection in African Americans since admixture is sufficiently weak that it falls below the threshold of our power to detect it using a large sample size. These results stand in contrast to the findings of a recent study of selection in African Americans. That study, which had 15 times fewer samples, reported six loci with significant deviations. We show that the discrepancy is likely due to insufficient correction for multiple hypothesis testing in the previous study. The same study reported 14 loci that showed greater population differentiation between African Americans and Nigerian Yoruba than would be expected in the absence of natural selection. Four such loci were previously shown to be genome-wide significant and likely to be affected by selection, but we show that most of the 10 additional loci are likely to be false positives. Additionally, the most parsimonious explanation for the loci that have significant evidence of unusual differentiation in frequency between Nigerians and Africans Americans is selection in Africa prior to their forced migration to the Americas.
△ Less
Submitted 10 December, 2013;
originally announced December 2013.
-
Scissors resonance in the quasi-continuum of Th, Pa and U isotopes
Authors:
M. Guttormsen,
L. A. Bernstein,
A. Görgen,
B. Jurado,
S. Siem,
M. Aiche,
Q. Ducasse,
F. Giacoppo,
F. Gunsing,
T. W. Hagen,
A. C. Larsen,
M. Lebois,
B. Leniau,
T. Renstrøm,
S. J. Rose,
T. G. Tornyi,
G. M. Tveten,
M. Wiedeking,
J. N. Wilson
Abstract:
The gamma-ray strength function in the quasi-continuum has been measured for 231-233Th, 232,233Pa and 237-239U using the Oslo method. All eight nuclei show a pronounced increase in gamma strength at omega_SR approx 2.4 MeV, which is interpreted as the low-energy M1 scissors resonance (SR). The total strength is found to be B_SR = 9-11 mu_N^2 when integrated over the 1 - 4 MeV gamma-energy region.…
▽ More
The gamma-ray strength function in the quasi-continuum has been measured for 231-233Th, 232,233Pa and 237-239U using the Oslo method. All eight nuclei show a pronounced increase in gamma strength at omega_SR approx 2.4 MeV, which is interpreted as the low-energy M1 scissors resonance (SR). The total strength is found to be B_SR = 9-11 mu_N^2 when integrated over the 1 - 4 MeV gamma-energy region. The SR displays a double-hump structure that is theoretically not understood. Our results are compared with data from (gamma, gamma') experiments and theoretical sum-rule estimates for a nuclear rigid-body moment of inertia.
△ Less
Submitted 26 October, 2013;
originally announced October 2013.
-
Constant-temperature level densities in the quasi-continuum of Th and U isotopes
Authors:
M. Guttormsen,
B. Jurado,
J. N. Wilson,
M. Aiche,
L. A. Bernstein,
Q. Ducasse,
F. Giacoppo,
A. Goergen,
F. Gunsing,
T. W. Hagen,
A. C. Larsen,
M. Lebois,
B. Leniau,
T. Renstroem,
S. J. Rose,
S. Siem,
T. Tornyi,
G. M. Tveten,
M. Wiedeking
Abstract:
Particle-gamma coincidences have been measured to obtain gamma-ray spectra as a function of excitation energy for 231-233Th and 237-239U. The level densities, which were extracted using the Oslo method, show a constant temperature behavior. The isotopes display very similar temperatures in the quasi-continuum, however, the even-odd isotopes reveal a constant entropy increase Delta S compared to th…
▽ More
Particle-gamma coincidences have been measured to obtain gamma-ray spectra as a function of excitation energy for 231-233Th and 237-239U. The level densities, which were extracted using the Oslo method, show a constant temperature behavior. The isotopes display very similar temperatures in the quasi-continuum, however, the even-odd isotopes reveal a constant entropy increase Delta S compared to their even-even neighbors. The entropy excess depends on available orbitals for the last unpaired valence neutron of the heated nuclear system. Also, experimental microcanonical temperature and heat capacity have been extracted. Several poles in the heat capacity curve support the idea that an almost continuous melting of Cooper pairs is responsible for the constant-temperature behavior.
△ Less
Submitted 25 June, 2013;
originally announced June 2013.
-
Observation of large scissors resonance strength in actinides
Authors:
M. Guttormsen,
L. A. Bernstein,
A. Bürger,
A. Görgen,
F. Gunsing,
T. W. Hagen,
A. C. Larsen,
T. Renstrøm,
S. Siem,
M. Wiedeking,
J. N. Wilson
Abstract:
The orbital M1-scissors resonance (SR) has been measured for the first time in the quasi-continuum of actinides. Particle-gamma coincidences are recorded with deuteron and 3He induced reactions on 232Th. The residual nuclei 231,232,233Th and 232,233Pa show an unexpectedly strong integrated strength of $B_{M1} = 11-15 μ_{n}^{2}$ in the Egamma=1.0 - 3.5 MeV region. The increased gamma-decay probabil…
▽ More
The orbital M1-scissors resonance (SR) has been measured for the first time in the quasi-continuum of actinides. Particle-gamma coincidences are recorded with deuteron and 3He induced reactions on 232Th. The residual nuclei 231,232,233Th and 232,233Pa show an unexpectedly strong integrated strength of $B_{M1} = 11-15 μ_{n}^{2}$ in the Egamma=1.0 - 3.5 MeV region. The increased gamma-decay probability in actinides due to the SR is important for cross-section calculations for future fuel cycles of fast nuclear reactors and may also have impact on stellar nucleosynthesis.
△ Less
Submitted 15 June, 2012;
originally announced June 2012.
-
Current assessment of the Red Rectangle band problem
Authors:
R. J. Glinski,
P. D. Michaels,
C. M. Anderson,
T. W. Schmidt,
R. G. Sharp,
M. L. Sitko,
L. S. Bernstein,
H. Van Winckel
Abstract:
In this paper we discuss our insights into several key problems in the identification of the Red Rectangle Bands (RRBs). We have combined three independent sets of observations in order to try to define the constraints guiding the bands. We provide a summary of the general behavior of the bands and review the evidence for a molecular origin of the bands. The extent, composition, and possible absor…
▽ More
In this paper we discuss our insights into several key problems in the identification of the Red Rectangle Bands (RRBs). We have combined three independent sets of observations in order to try to define the constraints guiding the bands. We provide a summary of the general behavior of the bands and review the evidence for a molecular origin of the bands. The extent, composition, and possible absorption effects of the bands are discussed. Comparison spectra of the strongest band obtained at three different spectral resolutions suggests that an intrinsic line width of individual rotational lines can be deduced. Spectroscopic models of several relatively simple molecules were examined in order to investigate where the current data are weak. Suggestions are made for future studies to enhance our understanding of these enigmatic bands.
△ Less
Submitted 28 February, 2011;
originally announced February 2011.