-
Euclid preparation. XLII. A unified catalogue-level reanalysis of weak lensing by galaxy clusters in five imaging surveys
Authors:
Euclid Collaboration,
M. Sereno,
S. Farrens,
L. Ingoglia,
G. F. Lesci,
L. Baumont,
G. Covone,
C. Giocoli,
F. Marulli,
S. Miranda La Hera,
M. Vannier,
A. Biviano,
S. Maurogordato,
L. Moscardini,
N. Aghanim,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
F. Bellagamba,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
J. Brinchmann
, et al. (199 additional authors not shown)
Abstract:
Precise and accurate mass calibration is required to exploit galaxy clusters as astrophysical and cosmological probes in the Euclid era. Systematic errors in lensing signals by galaxy clusters can be empirically estimated by comparing different surveys with independent and uncorrelated systematics. To assess the robustness of the lensing results to systematic errors, we carried out end-to-end test…
▽ More
Precise and accurate mass calibration is required to exploit galaxy clusters as astrophysical and cosmological probes in the Euclid era. Systematic errors in lensing signals by galaxy clusters can be empirically estimated by comparing different surveys with independent and uncorrelated systematics. To assess the robustness of the lensing results to systematic errors, we carried out end-to-end tests across different data sets. We performed a unified analysis at the catalogue level by leveraging the Euclid combined cluster and weak-lensing pipeline (COMB-CL). COMB-CL will measure weak lensing cluster masses for the Euclid Survey. Heterogeneous data sets from five independent, recent, lensing surveys (CHFTLenS, DES~SV1, HSC-SSP~S16a, KiDS~DR4, and RCSLenS), which exploited different shear and photometric redshift estimation algorithms, were analysed with a consistent pipeline under the same model assumptions. We performed a comparison of the amplitude of the reduced excess surface density and of the mass estimates using lenses from the Planck PSZ2 and SDSS redMaPPer cluster samples. Mass estimates agree with literature results collected in the LC2 catalogues. Mass accuracy was further investigated considering the AMICO detected clusters in the HSC-SSP XXL North field. The consistency of the data sets was tested using our unified analysis framework. We found agreement between independent surveys, at the level of systematic noise in Stage-III surveys or precursors. This indicates successful control over systematics. If such control continues in Stage-IV, Euclid will be able to measure the weak lensing masses of around 13000 (considering shot noise only) or 3000 (noise from shape and large-scale-structure) massive clusters with a signal-to-noise ratio greater than 3.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Euclid preparation: TBD. The pre-launch Science Ground Segment simulation framework
Authors:
Euclid Collaboration,
S. Serrano,
P. Hudelot,
G. Seidel,
J. E. Pollack,
E. Jullo,
F. Torradeflot,
D. Benielli,
R. Fahed,
T. Auphan,
J. Carretero,
H. Aussel,
P. Casenove,
F. J. Castander,
J. E. Davies,
N. Fourmanoit,
S. Huot,
A. Kara,
E. Keihanen,
S. Kermiche,
K. Okumura,
J. Zoubian,
A. Ealet,
A. Boucaud,
H. Bretonniere
, et al. (251 additional authors not shown)
Abstract:
The European Space Agency's Euclid mission is one of the upcoming generation of large-scale cosmology surveys, which will map the large-scale structure in the Universe with unprecedented precision. The development and validation of the SGS pipeline requires state-of-the-art simulations with a high level of complexity and accuracy that include subtle instrumental features not accounted for previous…
▽ More
The European Space Agency's Euclid mission is one of the upcoming generation of large-scale cosmology surveys, which will map the large-scale structure in the Universe with unprecedented precision. The development and validation of the SGS pipeline requires state-of-the-art simulations with a high level of complexity and accuracy that include subtle instrumental features not accounted for previously as well as faster algorithms for the large-scale production of the expected Euclid data products. In this paper, we present the Euclid SGS simulation framework as applied in a large-scale end-to-end simulation exercise named Science Challenge 8. Our simulation pipeline enables the swift production of detailed image simulations for the construction and validation of the Euclid mission during its qualification phase and will serve as a reference throughout operations. Our end-to-end simulation framework starts with the production of a large cosmological N-body & mock galaxy catalogue simulation. We perform a selection of galaxies down to I_E=26 and 28 mag, respectively, for a Euclid Wide Survey spanning 165 deg^2 and a 1 deg^2 Euclid Deep Survey. We build realistic stellar density catalogues containing Milky Way-like stars down to H<26. Using the latest instrumental models for both the Euclid instruments and spacecraft as well as Euclid-like observing sequences, we emulate with high fidelity Euclid satellite imaging throughout the mission's lifetime. We present the SC8 data set consisting of overlapping visible and near-infrared Euclid Wide Survey and Euclid Deep Survey imaging and low-resolution spectroscopy along with ground-based. This extensive data set enables end-to-end testing of the entire ground segment data reduction and science analysis pipeline as well as the Euclid mission infrastructure, paving the way to future scientific and technical developments and enhancements.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
Euclid preparation. XXXIV. The effect of linear redshift-space distortions in photometric galaxy clustering and its cross-correlation with cosmic shear
Authors:
Euclid Collaboration,
K. Tanidis,
V. F. Cardone,
M. Martinelli,
I. Tutusaus,
S. Camera,
N. Aghanim,
A. Amara,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
E. Branchini,
M. Brescia,
J. Brinchmann,
V. Capobianco,
C. Carbone,
J. Carretero,
S. Casas,
M. Castellano,
S. Cavuoti,
A. Cimatti,
R. Cledassou,
G. Congedo,
L. Conversi
, et al. (185 additional authors not shown)
Abstract:
The cosmological surveys that are planned for the current decade will provide us with unparalleled observations of the distribution of galaxies on cosmic scales, by means of which we can probe the underlying large-scale structure (LSS) of the Universe. This will allow us to test the concordance cosmological model and its extensions. However, precision pushes us to high levels of accuracy in the th…
▽ More
The cosmological surveys that are planned for the current decade will provide us with unparalleled observations of the distribution of galaxies on cosmic scales, by means of which we can probe the underlying large-scale structure (LSS) of the Universe. This will allow us to test the concordance cosmological model and its extensions. However, precision pushes us to high levels of accuracy in the theoretical modelling of the LSS observables, so that no biases are introduced into the estimation of the cosmological parameters. In particular, effects such as redshift-space distortions (RSD) can become relevant in the computation of harmonic-space power spectra even for the clustering of the photometrically selected galaxies, as has previously been shown in literature. In this work, we investigate the contribution of linear RSD, as formulated in the Limber approximation by a previous work, in forecast cosmological analyses with the photometric galaxy sample of the Euclid survey. We aim to assess their impact and to quantify the bias on the measurement of cosmological parameters that would be caused if this effect were neglected. We performed this task by producing mock power spectra for photometric galaxy clustering and weak lensing, as is expected to be obtained from the Euclid survey. We then used a Markov chain Monte Carlo approach to obtain the posterior distributions of cosmological parameters from these simulated observations. When the linear RSD is neglected, significant biases are caused when galaxy correlations are used alone and when they are combined with cosmic shear in the so-called 3$\times$2pt approach. These biases can be equivalent to as much as $5\,σ$ when an underlying $Λ$CDM cosmology is assumed. When the cosmological model is extended to include the equation-of-state parameters of dark energy, the extension parameters can be shifted by more than $1\,σ$.
△ Less
Submitted 22 April, 2024; v1 submitted 31 August, 2023;
originally announced September 2023.
-
Systematic characterisation of the Herschel SPIRE Fourier Transform Spectrometer
Authors:
R. Hopwood,
E. T. Polehampton,
I. Valtchanov,
B. M. Swinyard,
T. Fulton,
N. Lu,
N. Marchili,
M. H. D. van der Wiel,
D. Benielli,
P. Imhof,
J. -P. Baluteau,
C. Pearson,
D. L. Clements,
M. J. Griffin,
T. L. Lim,
G. Makiwa,
D. A. Naylor,
G. Noble,
E. Puga,
L. D. Spencer
Abstract:
A systematic programme of calibration observations was carried out to monitor the performance of the SPIRE FTS instrument on board the Herschel Space Observatory. Observations of planets (including the prime point-source calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration sources were made in order to monitor repeatability and sensitivity, and to improve FTS calibration.…
▽ More
A systematic programme of calibration observations was carried out to monitor the performance of the SPIRE FTS instrument on board the Herschel Space Observatory. Observations of planets (including the prime point-source calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration sources were made in order to monitor repeatability and sensitivity, and to improve FTS calibration. We present a complete analysis of the full set of calibration observations and use them to assess the performance of the FTS. Particular care is taken to understand and separate out the effect of pointing uncertainties, including the position of the internal beam steering mirror for sparse observations in the early part of the mission. The repeatability of spectral line centre positions is <5km/s, for lines with signal-to-noise ratios >40, corresponding to <0.5-2.0% of a resolution element. For spectral line flux, the repeatability is better than 6%, which improves to 1-2% for spectra corrected for pointing offsets. The continuum repeatability is 4.4% for the SLW band and 13.6% for the SSW band, which reduces to ~1% once the data have been corrected for pointing offsets. Observations of dark sky were used to assess the sensitivity and the systematic offset in the continuum, both of which were found to be consistent across the FTS detector arrays. The average point-source calibrated sensitivity for the centre detectors is 0.20 and 0.21 Jy [1 sigma; 1 hour], for SLW and SSW. The average continuum offset is 0.40 Jy for the SLW band and 0.28 Jy for the SSW band.
△ Less
Submitted 19 February, 2015;
originally announced February 2015.
-
Calibration of the Herschel SPIRE Fourier Transform Spectrometer
Authors:
B. M. Swinyard,
E. T. Polehampton,
R. Hopwood,
I. Valtchanov,
N. Lu,
T. Fulton,
D. Benielli,
P. Imhof,
N. Marchili,
J. -P. Baluteau,
G. J. Bendo,
M. Ferlet,
M. J. Griffin,
T. L. Lim,
G. Makiwa,
D. A. Naylor,
G. S. Orton,
A. Papageorgiou,
C. P. Pearson,
B. Schulz,
S. D. Sidher,
L. D. Spencer,
M. H. D. van der Wiel,
R. Wu
Abstract:
The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standa…
▽ More
The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standard astronomical sources. The calibration scheme assumes a spatially extended source and uses the Herschel telescope as primary calibrator. Conversion from extended to point-source calibration is carried out using observations of the planet Uranus. The model of the telescope emission is shown to be accurate to within 6% and repeatable to better than 0.06% and, by comparison with models of Mars and Neptune, the Uranus model is shown to be accurate to within 3%. Multiple observations of a number of point-like sources show that the repeatability of the calibration is better than 1%, if the effects of the satellite absolute pointing error (APE) are corrected. The satellite APE leads to a decrement in the derived flux, which can be up to ~10% (1 sigma) at the high-frequency end of the SPIRE range in the first part of the mission, and ~4% after Herschel operational day 1011. The lower frequency range of the SPIRE band is unaffected by this pointing error due to the larger beam size. Overall, for well-pointed, point-like sources, the absolute flux calibration is better than 6%, and for extended sources where mapping is required it is better than 7%.
△ Less
Submitted 5 March, 2014;
originally announced March 2014.
-
Herschel SPIRE FTS Relative Spectral Response Calibration
Authors:
Trevor Fulton,
Rosalind Hopwood,
Jean-Paul Baluteau,
Dominique Benielli,
Peter Imhof,
Tanya Lim,
Nanyao Lu,
Nicola Marchili,
David Naylor,
Edward Polehampton,
Bruce Swinyard,
Ivan Valtchanov
Abstract:
Herschel/SPIRE Fourier transform spectrometer (FTS) observations contain emission from both the Herschel Telescope and the SPIRE Instrument itself, both of which are typically orders of magnitude greater than the emission from the astronomical source, and must be removed in order to recover the source spectrum. The effects of the Herschel Telescope and the SPIRE Instrument are removed during data…
▽ More
Herschel/SPIRE Fourier transform spectrometer (FTS) observations contain emission from both the Herschel Telescope and the SPIRE Instrument itself, both of which are typically orders of magnitude greater than the emission from the astronomical source, and must be removed in order to recover the source spectrum. The effects of the Herschel Telescope and the SPIRE Instrument are removed during data reduction using relative spectral response calibration curves and emission models. We present the evolution of the methods used to derive the relative spectral response calibration curves for the SPIRE FTS. The relationship between the calibration curves and the ultimate sensitivity of calibrated SPIRE FTS data is discussed and the results from the derivation methods are compared. These comparisons show that the latest derivation methods result in calibration curves that impart a factor of between 2 and 100 less noise to the overall error budget, which results in calibrated spectra for individual observations whose noise is reduced by a factor of 2-3, with a gain in the overall spectral sensitivity of 23% and 21% for the two detector bands, respectively.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Herschel SPIRE FTS telescope model correction
Authors:
Rosalind Hopwood,
Trevor Fulton,
Edward T. Polehampton,
Ivan Valtchanov,
Dominique Benielli,
Peter Imhof,
Tanya Lim,
Nanyao Lu,
Nicola Marchili,
Chris P. Pearson,
Bruce M. Swinyard
Abstract:
Emission from the Herschel telescope is the dominant source of radiation for the majority of SPIRE Fourier transform spectrometer (FTS) observations, despite the exceptionally low emissivity of the primary and secondary mirrors. Accurate modelling and removal of the telescope contribution is, therefore, an important and challenging aspect of FTS calibration and data reduction pipeline. A dust-cont…
▽ More
Emission from the Herschel telescope is the dominant source of radiation for the majority of SPIRE Fourier transform spectrometer (FTS) observations, despite the exceptionally low emissivity of the primary and secondary mirrors. Accurate modelling and removal of the telescope contribution is, therefore, an important and challenging aspect of FTS calibration and data reduction pipeline. A dust-contaminated telescope model with time invariant mirror emissivity was adopted before the Herschel launch. However, measured FTS spectra show a clear evolution of the telescope contribution over the mission and strong need for a correction to the standard telescope model in order to reduce residual background (of up to 7 Jy) in the final data products. Systematic changes in observations of dark sky, taken over the course of the mission, provide a measure of the evolution between observed telescope emission and the telescope model. These dark sky observations have been used to derive a time dependent correction to the telescope emissivity that reduces the systematic error in the continuum of the final FTS spectra to ~0.35 Jy.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Herschel SPIRE Fourier Transform Spectrometer: Calibration of its Bright-source Mode
Authors:
Nanyao Lu,
Edward T. Polehampton,
Bruce M. Swinyard,
Dominique Benielli,
Trevor Fulton,
Rosalind Hopwood,
Peter Imhof,
Tanya Lim,
Nicola Marchili,
David A. Naylor,
Bernhard Schulz,
Sunil Sidher,
Ivan Valtchanov
Abstract:
The Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board the ESA Herschel Space Observatory has two detector setting modes: (a) a nominal mode, which is optimized for observing moderately bright to faint astronomical targets, and (b) a bright-source mode recommended for sources significantly brighter than 500 Jy, within the SPIRE FTS bandwidth of 4…
▽ More
The Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board the ESA Herschel Space Observatory has two detector setting modes: (a) a nominal mode, which is optimized for observing moderately bright to faint astronomical targets, and (b) a bright-source mode recommended for sources significantly brighter than 500 Jy, within the SPIRE FTS bandwidth of 446.7-1544 GHz (or 194-671 microns in wavelength), which employs a reduced detector responsivity and out-of-phase analog signal amplifier/demodulator. We address in detail the calibration issues unique to the bright-source mode, describe the integration of the bright-mode data processing into the existing pipeline for the nominal mode, and show that the flux calibration accuracy of the bright-source mode is generally within 2% of that of the nominal mode, and that the bright-source mode is 3 to 4 times less sensitive than the nominal mode.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Relative pointing offset analysis of calibration targets with repeated observations with Herschel-SPIRE Fourier-Transform Spectrometer
Authors:
Ivan Valtchanov,
Rosalind Hopwood,
Edward Polehampton,
Dominique Benielli,
Trevor Fulton,
Peter Imhof,
Tomasz Konopczynski,
Tanya Lim,
Nanyao Lu,
Nicola Marchili,
David Naylor,
Bruce Swinyard
Abstract:
We present a method to derive the relative pointing offsets for SPIRE Fourier-Transform Spectrometer (FTS) solar system object (SSO) calibration targets, which were observed regularly throughout the Herschel mission. We construct ratios of the spectra for all observations of a given source with respect to a reference. The reference observation is selected iteratively to be the one with the highest…
▽ More
We present a method to derive the relative pointing offsets for SPIRE Fourier-Transform Spectrometer (FTS) solar system object (SSO) calibration targets, which were observed regularly throughout the Herschel mission. We construct ratios of the spectra for all observations of a given source with respect to a reference. The reference observation is selected iteratively to be the one with the highest observed continuum. Assuming that any pointing offset leads to an overall shift of the continuum level, then these ratios represent the relative flux loss due to mispointing. The mispointing effects are more pronounced for a smaller beam, so we consider only the FTS short wavelength array (SSW, 958-1546 GHz) to derive a pointing correction. We obtain the relative pointing offset by comparing the ratio to a grid of expected losses for a model source at different distances from the centre of the beam, under the assumption that the SSW FTS beam can be well approximated by a Gaussian. In order to avoid dependency on the point source flux conversion, which uses a particular observation of Uranus, we use extended source flux calibrated spectra to construct the ratios for the SSOs. In order to account for continuum variability, due to the changing distance from the Herschel telescope, the SSO ratios are normalised by the expected model ratios for the corresponding observing epoch. We confirm the accuracy of the derived pointing offset by comparing the results with a number of control observations, where the actual pointing of Herschel is known with good precision. Using the method we derived pointing offsets for repeated observations of Uranus (including observations centred on off-axis detectors), Neptune, Ceres and NGC7027. The results are used to validate and improve the point-source flux calibration of the FTS.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Herschel SPIRE FTS Spectral Mapping Calibration
Authors:
Dominique Benielli,
Edward Polehampton,
Rosalind Hopwood,
Ana Belén Griñón Marín,
Trevor Fulton,
Peter Imhof,
Tanya Lim,
Nanyao Lu,
Gibion Makiwa,
Nicola Marchili,
David Naylor,
Locke Spencer,
Bruce Swinyard,
Ivan Valtchanov,
Matthijs van der Wiel
Abstract:
The Herschel SPIRE Fourier transform spectrometer (FTS) performs spectral imaging in the 447-1546 GHz band. It can observe in three spatial sampling modes: sparse mode, with a single pointing on sky, or intermediate or full modes with 1 and 1/2 beam spacing, respectively. In this paper, we investigate the uncertainty and repeatability for fully sampled FTS mapping observations. The repeatability i…
▽ More
The Herschel SPIRE Fourier transform spectrometer (FTS) performs spectral imaging in the 447-1546 GHz band. It can observe in three spatial sampling modes: sparse mode, with a single pointing on sky, or intermediate or full modes with 1 and 1/2 beam spacing, respectively. In this paper, we investigate the uncertainty and repeatability for fully sampled FTS mapping observations. The repeatability is characterised using nine observations of the Orion Bar. Metrics are derived based on the ratio of the measured intensity in each observation compared to that in the combined spectral cube from all observations. The mean relative deviation is determined to be within 2%, and the pixel-by-pixel scatter is ~7%. The scatter increases towards the edges of the maps. The uncertainty in the frequency scale is also studied, and the spread in the line centre velocity across the maps is found to be ~15 km/s. Other causes of uncertainty are also discussed including the effect of pointing and the additive uncertainty in the continuum.
△ Less
Submitted 9 January, 2014;
originally announced January 2014.
-
Observing Extended Sources with the \Herschel SPIRE Fourier Transform Spectrometer
Authors:
Ronin Wu,
Edward T. Polehampton,
Mireya Etxaluze,
Gibion Makiwa,
David A. Naylor,
Carl Salji,
Bruce M. Swinyard,
Marc Ferlet,
Matthijs H. D. van der Wiel,
Anthony J. Smith,
Trevor Fulton,
Matt J. Griffin,
Jean-Paul Baluteau,
Dominique Benielli,
Jason Glenn,
Rosalind Hopwood,
Peter Imhof,
Tanya Lim,
Nanyao Lu,
Pasquale Panuzzo,
Chris Pearson,
Sunil Sidher,
Ivan Valtchanov
Abstract:
The Spectral and Photometric Imaging Receiver (SPIRE) on the European Space Agency's Herschel Space Observatory utilizes a pioneering design for its imaging spectrometer in the form of a Fourier Transform Spectrometer (FTS). The standard FTS data reduction and calibration schemes are aimed at objects with either a spatial extent much larger than the beam size or a source that can be approximated a…
▽ More
The Spectral and Photometric Imaging Receiver (SPIRE) on the European Space Agency's Herschel Space Observatory utilizes a pioneering design for its imaging spectrometer in the form of a Fourier Transform Spectrometer (FTS). The standard FTS data reduction and calibration schemes are aimed at objects with either a spatial extent much larger than the beam size or a source that can be approximated as a point source within the beam. However, when sources are of intermediate spatial extent, neither of these calibrations schemes is appropriate and both the spatial response of the instrument and the source's light profile must be taken into account and the coupling between them explicitly derived. To that end, we derive the necessary corrections using an observed spectrum of a fully extended source with the beam profile and the source's light profile taken into account. We apply the derived correction to several observations of planets and compare the corrected spectra with their spectral models to study the beam coupling efficiency of the instrument in the case of partially extended sources. We find that we can apply these correction factors for sources with angular sizes up to θ_{D} ~ 17". We demonstrate how the angular size of an extended source can be estimated using the difference between the sub-spectra observed at the overlap bandwidth of the two frequency channels in the spectrometer, at 959<ν<989 GHz. Using this technique on an observation of Saturn, we estimate a size of 17.2", which is 3% larger than its true size on the day of observation. Finally, we show the results of the correction applied on observations of a nearby galaxy, M82, and the compact core of a Galactic molecular cloud, Sgr B2.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
The Herschel-SPIRE instrument and its in-flight performance
Authors:
M. J. Griffin,
A. Abergel,
A. Abreu,
P. A. R. Ade,
P. André,
J. -L. Augueres,
T. Babbedge,
Y. Bae,
T. Baillie,
J. -P. Baluteau,
M. J. Barlow,
G. Bendo,
D. Benielli,
J. J. Bock,
P. Bonhomme,
D. Brisbin,
C. Brockley-Blatt,
M. Caldwell,
C. Cara,
N. Castro-Rodriguez,
R. Cerulli,
P. Chanial,
S. Chen,
E. Clark,
D. L. Clements
, et al. (154 additional authors not shown)
Abstract:
The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-c…
▽ More
The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a field of view of 4' x 8', observed simultaneously in the three spectral bands. Its main operating mode is scan-mapping, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired. The spectrometer has an approximately circular field of view with a diameter of 2.6'. The spectral resolution can be adjusted between 1.2 and 25 GHz by changing the stroke length of the FTS scan mirror. Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data. For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view. The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling. Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products. The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 1.5-2.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.
-
In-flight calibration of the Herschel-SPIRE instrument
Authors:
B. M. Swinyard,
P. Ade,
J-P. Baluteau,
H. Aussel,
M. J. Barlow,
G. J. Bendo,
D. Benielli,
J. Bock,
D. Brisbin,
A. Conley,
L. Conversi,
A. Dowell,
D. Dowell,
M. Ferlet,
T. Fulton,
J. Glenn,
A. Glauser,
D. Griffin,
M. Griffin,
S. Guest,
P. Imhof,
K. Isaak,
S. Jones,
K. King,
S. Leeks
, et al. (33 additional authors not shown)
Abstract:
SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument…
▽ More
SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument using a combination of the emission from the Herschel telescope itself and the modelled continuum emission from solar system objects and other astronomical targets. We present the photometric, spectroscopic and spatial accuracy that is obtainable in data processed through the "standard" pipelines. The overall photometric accuracy at this stage of the mission is estimated as 15% for the photometer and between 15 and 50% for the spectrometer. However, there remain issues with the photometric accuracy of the spectra of low flux sources in the longest wavelength part of the SPIRE spectrometer band. The spectrometer wavelength accuracy is determined to be better than 1/10th of the line FWHM. The astrometric accuracy in SPIRE maps is found to be 2 arcsec when the latest calibration data are used. The photometric calibration of the SPIRE instrument is currently determined by a combination of uncertainties in the model spectra of the astronomical standards and the data processing methods employed for map and spectrum calibration. Improvements in processing techniques and a better understanding of the instrument performance will lead to the final calibration accuracy of SPIRE being determined only by uncertainties in the models of astronomical standards.
△ Less
Submitted 27 May, 2010;
originally announced May 2010.
