Showing 1–28 of 28 results for author: Basu, C

Fabrication of $^{108}$Cd target for the astrophysical p-process studies

Authors: Sukhendu Saha, Mousri Paul, Lalit Kumar Sahoo, Dipali Basak, Tanmoy Bar, Jagannath Datta, Sandipan Dasgupta, G. L. N. Reddy, Chinmay Basu

Abstract: The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adju… ▽ More The detailed process of preparing enriched $^{108}$Cd targets on mylar and copper backing using the vacuum evaporation technique is described. These targets were employed in an experiment to measure the proton capture cross-section at energies significantly below the Coulomb barrier, for the astrophysical p-process studies. Due to the low melting point and high vapor pressure of cadmium, some adjustments were implemented in the Telemark multipocket e-beam setup. The target thickness was determined through the measurement of alpha particle energy loss from a triple alpha source and also by RBS measurements. The thickness of the $^{108}$Cd films varies between 290 to 660 $μ$g/cm$^2$, with a non-uniformity of approximately 10$\%$. X-ray Photoelectron Spectroscopy (XPS) and X-ray Fluorescence (XRF) analyses were conducted to examine the presence of impurities and to assess surface morphology, phase, and chemical composition. △ Less

Submitted 19 January, 2024; originally announced February 2024.

Can Large Language Models Detect Misinformation in Scientific News Reporting?

Authors: Yupeng Cao, Aishwarya Muralidharan Nair, Elyon Eyimife, Nastaran Jamalipour Soofi, K. P. Subbalakshmi, John R. Wullert II, Chumki Basu, David Shallcross

Abstract: Scientific facts are often spun in the popular press with the intent to influence public opinion and action, as was evidenced during the COVID-19 pandemic. Automatic detection of misinformation in the scientific domain is challenging because of the distinct styles of writing in these two media types and is still in its nascence. Most research on the validity of scientific reporting treats this pro… ▽ More Scientific facts are often spun in the popular press with the intent to influence public opinion and action, as was evidenced during the COVID-19 pandemic. Automatic detection of misinformation in the scientific domain is challenging because of the distinct styles of writing in these two media types and is still in its nascence. Most research on the validity of scientific reporting treats this problem as a claim verification challenge. In doing so, significant expert human effort is required to generate appropriate claims. Our solution bypasses this step and addresses a more real-world scenario where such explicit, labeled claims may not be available. The central research question of this paper is whether it is possible to use large language models (LLMs) to detect misinformation in scientific reporting. To this end, we first present a new labeled dataset SciNews, containing 2.4k scientific news stories drawn from trusted and untrustworthy sources, paired with related abstracts from the CORD-19 database. Our dataset includes both human-written and LLM-generated news articles, making it more comprehensive in terms of capturing the growing trend of using LLMs to generate popular press articles. Then, we identify dimensions of scientific validity in science news articles and explore how this can be integrated into the automated detection of scientific misinformation. We propose several baseline architectures using LLMs to automatically detect false representations of scientific findings in the popular press. For each of these architectures, we use several prompt engineering strategies including zero-shot, few-shot, and chain-of-thought prompting. We also test these architectures and prompting strategies on GPT-3.5, GPT-4, and Llama2-7B, Llama2-13B. △ Less

Submitted 21 February, 2024; originally announced February 2024.

First (calibration) experiment using proton beam from FRENA at SINP

Authors: C. Basu, K. Banerjee, T. K. Ghosh, G. Mukherjee, C. Bhattacharya, Shraddha S Desai, R. Shil, A. K. Saha, J. K. Meena, T. Bar, D. Basak, L. K. Sahoo, S. Saha, C. Marick, D. Das, D. Das, D. Das, M. Kujur, S. Roy, S. S. Basu, U. Gond, A. Saha, A. Das, M. Samanta, P. Saha , et al. (1 additional authors not shown)

Abstract: This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. △ Less

Submitted 24 January, 2024; originally announced February 2024.

Study of $^{113}$In($α,α$) elastic scattering to determine $α$-optical potential relevant for astrophysical $γ$-process

Authors: Dipali Basak, Tanmoy Bar, Lalit Kumar Sahoo, Sukhendu Saha, T. K. Rana, S. Manna, C. Bhattacharya, Samir Kundu, J. K. Sahoo, J. K. Meena, A. K. Saha, Ashok Kumar Mondal, Chinmay Basu

Abstract: The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~(… ▽ More The $α$-optical potential is one of the key input parameters used to measure the reaction rate of the ($γ,α$)-process using the Hauser-Feshbach(HF) statistical model and the principle of detailed balance. $α$-elastic scattering experiment on $^{113}$In $p$-nucleus was carried out in the energy range E$_{lab}$=26$-$32 MeV. The vacuum evaporation technique was used to prepare the $^{113}$In target~($\sim$86 $μ$g/cm$^2$). An energy-dependent local optical potential parameters set was obtained by analysing the experimental elastic scattering angular distribution data. The local potential parameters are extrapolated for lower energies and are used to measure the $^{113}$In($α,γ$) reaction cross-section. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Experimental study of $α$-induced reactions on $^{113}$In for astrophysical $p$-process

Authors: Dipali Basak, Tanmoy Bar, Abhijit Roy, Lalit Kumar Sahoo, Sukhendu Saha, Jagannath Datta, Sandipan Dasgupta, Chinmay Basu

Abstract: Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employin… ▽ More Neutron deficient nuclei from $^{74}$Se$-^{196}$Hg are thought to be produced by $γ$-induced reactions ($γ$,n), ($γ$,p) and ($γ,α$) processes. The relatively high abundance of $^{113}$In odd A $p$-nuclei has inspired to study its production processes. As reaction with $γ$-beam is difficult to perform in the laboratory, $γ$-induced reaction rate is calculated from the inverse reaction data employing reciprocity theorem. Stacked foil activation method was used to measure the $^{113}$In($α,γ$) and $^{113}$In($α$, n) reactions cross-section near the astrophysical energies. Theoretical statistical model calculations were performed with different nuclear input parameters and compared with the experimental results. An appropriate $α$-optical potential has been identified from the ($α,γ$) and ($α$, n) fitting, which provides the major source of uncertainty in the statistical model calculations. The other nuclear input parameters like level density, and $γ$-ray strength function were also constrained for theoretical calculations. $^{113}$In($α,γ$)$^{117}$Sb and $^{117}$Sb($α,γ$)$^{113}$In reaction rates were calculated using best-fitted input parameters. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Measurement of $^{144}$Sm(p,$γ$) cross-section at Gamow energies

Authors: Tanmoy Bar, Dipali Basak, Lalit Kumar Sahoo, Sukhendu Saha, Jagannath Datta, Sandipan Dasgupta, Chinmay Basu

Abstract: The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly h… ▽ More The cross-section measurement of $^{144}$Sm(p, $γ$)$^{145}$Eu (T$_{1/2}=$5.93(4) days) reaction has been performed at proton energies around 2.6, 3.1, 3.7, 4.1, 4.2, 4.7, 5.1, 5.5, 5.9, 6.4, 6.8 MeV using the activation technique. These energies correspond to the Gamow window for 3, 4 GK and a partial portion for 2 GK. $^{144}$Sm has been chosen for the present study because of its significantly higher abundance compared to the other neighboring $p$-nuclides (Z $>$ 50). The astrophysical $S-$factor of this reaction has been measured for the first time at E$^{cm}_p=$ 2.57$\pm$0.13 MeV, $S-$ factor$=$2.542$\pm$1.152($\times$10$^{10}$) MeV-b. Cross-section data were compared with the previously measured experimental data from literature and the theoretical predictions obtained using Hauser-Feshbach statistical model codes TALYS 1.96 and NON-SMOKER. A satisfactory agreement between experimental data and theoretical results was observed. Molecular deposition technique was used to prepare the $^{144}$Sm targets having thickness between 100$-$350 $μ$g/cm$^2$ on Al backing. Obtained results were utilized to predict the reaction rates for $^{144}$Sm (p, $γ$) and $^{145}$Eu ($γ$, p) reactions using TALYS 1.96 and the reciprocity theorem. △ Less

Submitted 7 January, 2024; originally announced January 2024.

Using Weak Supervision and Data Augmentation in Question Answering

Authors: Chumki Basu, Himanshu Garg, Allen McIntosh, Sezai Sablak, John R. Wullert II

Abstract: The onset of the COVID-19 pandemic accentuated the need for access to biomedical literature to answer timely and disease-specific questions. During the early days of the pandemic, one of the biggest challenges we faced was the lack of peer-reviewed biomedical articles on COVID-19 that could be used to train machine learning models for question answering (QA). In this paper, we explore the roles we… ▽ More The onset of the COVID-19 pandemic accentuated the need for access to biomedical literature to answer timely and disease-specific questions. During the early days of the pandemic, one of the biggest challenges we faced was the lack of peer-reviewed biomedical articles on COVID-19 that could be used to train machine learning models for question answering (QA). In this paper, we explore the roles weak supervision and data augmentation play in training deep neural network QA models. First, we investigate whether labels generated automatically from the structured abstracts of scholarly papers using an information retrieval algorithm, BM25, provide a weak supervision signal to train an extractive QA model. We also curate new QA pairs using information retrieval techniques, guided by the clinicaltrials.gov schema and the structured abstracts of articles, in the absence of annotated data from biomedical domain experts. Furthermore, we explore augmenting the training data of a deep neural network model with linguistic features from external sources such as lexical databases to account for variations in word morphology and meaning. To better utilize our training data, we apply curriculum learning to domain adaptation, fine-tuning our QA model in stages based on characteristics of the QA pairs. We evaluate our methods in the context of QA models at the core of a system to answer questions about COVID-19. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Med-EASi: Finely Annotated Dataset and Models for Controllable Simplification of Medical Texts

Authors: Chandrayee Basu, Rosni Vasu, Michihiro Yasunaga, Qian Yang

Abstract: Automatic medical text simplification can assist providers with patient-friendly communication and make medical texts more accessible, thereby improving health literacy. But curating a quality corpus for this task requires the supervision of medical experts. In this work, we present $\textbf{Med-EASi}$ ($\underline{\textbf{Med}}$ical dataset for $\underline{\textbf{E}}$laborative and… ▽ More Automatic medical text simplification can assist providers with patient-friendly communication and make medical texts more accessible, thereby improving health literacy. But curating a quality corpus for this task requires the supervision of medical experts. In this work, we present $\textbf{Med-EASi}$ ($\underline{\textbf{Med}}$ical dataset for $\underline{\textbf{E}}$laborative and $\underline{\textbf{A}}$bstractive $\underline{\textbf{Si}}$mplification), a uniquely crowdsourced and finely annotated dataset for supervised simplification of short medical texts. Its $\textit{expert-layman-AI collaborative}$ annotations facilitate $\textit{controllability}$ over text simplification by marking four kinds of textual transformations: elaboration, replacement, deletion, and insertion. To learn medical text simplification, we fine-tune T5-large with four different styles of input-output combinations, leading to two control-free and two controllable versions of the model. We add two types of $\textit{controllability}$ into text simplification, by using a multi-angle training approach: $\textit{position-aware}$, which uses in-place annotated inputs and outputs, and $\textit{position-agnostic}$, where the model only knows the contents to be edited, but not their positions. Our results show that our fine-grained annotations improve learning compared to the unannotated baseline. Furthermore, $\textit{position-aware}$ control generates better simplification than the $\textit{position-agnostic}$ one. The data and code are available at https://github.com/Chandrayee/CTRL-SIMP. △ Less

Submitted 17 February, 2023; originally announced February 2023.

Lithium fluoride (LiF) target preparation for nuclear physics experiment

Authors: Lalit Kumar Sahoo, Ashok Kumar Mondal, Dipali Basak, Chinmay Basu, Suraj Kumar Karan

Abstract: The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis co… ▽ More The LiF target preparation on self-supporting Ag backing (LiF/Ag) is discussed in a detailed manner using vacuum evaporation process. The target thickness is measured using the energy loss of three line alpha source. 183.74 μg/cm 2 thickness of LiF is achieved through the evaporation process. Good uniformity of targets is observed. Non-uniformity in targets is found within 6 %. The XPS analysis confirms the presence of both the F and Li atoms on sample surface. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Journal ref: Vacuum 212 (2023) 112055

Investigation of long lived activity produced due to neutron emitting reactions

Authors: Tanmoy Bar, Dipali Basak, Sukhendu Saha, Lalit Kumar Sahoo, Chinmay Basu

Abstract: In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvatur… ▽ More In this article, a detailed investigation has been done for the long lived gamma activity due to neutron emitting experiments. These calculations mainly focused on the experiments used for energy calibration purposes. Calibrated energy is one of the most essential features of any accelerator facility. Several experiments have been used for this purpose. Generally, experiments having sharp curvature change in cross section of yield are used. Neutron emitting experiments are one of such. Around the globe reactions like $^7Li(p,n)$, $^{13}C(p,n)$, $^{19}F(p,n)$, $^{27}Al(p,n)$ etc. are used to calibrate energy of the beam with accelerator terminal voltage. Neutrons coming from these experiments can interact with surrounding elements. These interactions with neutrons can create long lived gamma activity which may interfere with future measurements. The present study has been done keeping in mind the new Facility for Research in Experimental Nuclear Astrophysics (FRENA) at Saha Institute of Nuclear Physics. It is a 3MV tandetron low energy high current machine. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Determination of $α$-optical potential for reactions with p-nuclei from the study of ($α$,n) reactions in the astrophysically relevant energy region

Authors: Dipali Basak, Chinmay Basu

Abstract: Optical potential parameters in nuclear model calculations are determined by fitting elastic scattering angular distribution data. Due to the dominance of Coulomb part, elastic scattering is performed at much higher energies. A different approach using ($α$,n) reaction is suggested to determine the alpha optical potentials suitable for astrophysically relevant low energy regions. Reaction on p-nuc… ▽ More Optical potential parameters in nuclear model calculations are determined by fitting elastic scattering angular distribution data. Due to the dominance of Coulomb part, elastic scattering is performed at much higher energies. A different approach using ($α$,n) reaction is suggested to determine the alpha optical potentials suitable for astrophysically relevant low energy regions. Reaction on p-nuclei in the mass region A $\approx$ 92-168 have been chosen and a modified McFadden-Satchler $α$-optical potential is obtained from fitting the ($α$,n) reaction data. The effect of level density and $γ$-ray strength function is also studied using this new potential by analyzing ($α,γ$) cross-sections. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Direct reaction contribution in the very low energy $^{19}$F(p,$α_0$) reaction

Authors: Lalit Kumar Sahoo, Chinmay Basu

Abstract: The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F. The direct reaction component of the $^{19}$F(p,$α_{0}$) reaction at E$_{cm}$=180-600 keV is studied for the data that has become very recently available. This component has been found to be significant in the present work using the direct pickup model in framework of the DWBA formalism and indicate the strong cluster structure of $^{19}$F. △ Less

Submitted 8 October, 2020; originally announced October 2020.

A simple method to prepare deuterated targets for experiments relevant to nuclear astrophysics

Authors: Tanmoy Bar, Chinmay Basu

Abstract: In this work, a simple and efficient thin ($50- 350μg/cm^2$) deuterated polyethylene target preparation method is described. The method of easy removal of thin targets from casting surface without using any cryogenic freezing has been described. The difference in thermal expansion properties is used to separate films from glass slides. 3-$α$ radioactive source is used to measure the target thickne… ▽ More In this work, a simple and efficient thin ($50- 350μg/cm^2$) deuterated polyethylene target preparation method is described. The method of easy removal of thin targets from casting surface without using any cryogenic freezing has been described. The difference in thermal expansion properties is used to separate films from glass slides. 3-$α$ radioactive source is used to measure the target thickness. The material property of the prepared targets is verified by Attenuated total reflection (ATR) method. △ Less

Submitted 19 August, 2020; v1 submitted 12 April, 2020; originally announced April 2020.

Wood-Saxon alpha potential for p-nuclei $^{106}$Cd and $^{113}$In

Authors: Dipali Basak, Chinmay Basu

Abstract: Alpha elastic scattering of p-nuclei were studied for calculating optical potentials. Choice of the $α$-optical potentials are important to measure the reaction rates of p-process. $^{106}$Cd$(α,α)^{106}$Cd and $^{113}$In$(α,α)^{113}$In elastic scattering cross-section data were used to determine the potential parameter sets at E$_{lab}$= 16.1-27 MeV for $^{106}$Cd and E$_{lab}$=16.14, 19.4 MeV fo… ▽ More Alpha elastic scattering of p-nuclei were studied for calculating optical potentials. Choice of the $α$-optical potentials are important to measure the reaction rates of p-process. $^{106}$Cd$(α,α)^{106}$Cd and $^{113}$In$(α,α)^{113}$In elastic scattering cross-section data were used to determine the potential parameter sets at E$_{lab}$= 16.1-27 MeV for $^{106}$Cd and E$_{lab}$=16.14, 19.4 MeV for $^{113}$In system. A Wood-Saxon potential form factor is used for both real and imaginary part. The potential parameters extracted in the present study exhibit a satisfactory result with respect to existing global potential parameters. △ Less

Submitted 26 February, 2020; originally announced February 2020.

Simulation of heat transfer and dissipation in targets used in nuclear astrophysics experiments

Authors: Tanmoy Bar, Chinmay Basu, Mithun Das, Apurba Kumar Santra, Swarnendu Sen

Abstract: This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside… ▽ More This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside target is relatively low and a fair amount of high current (few $μ$A)can be used without any melting issue. But in case of thick targets ($^{27}Al(p,γ),^{12}C(p,γ)$) cooling became essential for the survival of reaction target. △ Less

Submitted 24 February, 2020; originally announced February 2020.

The determination of α-spectroscopic factors and ANC of 16O states using 12C(20Ne,16O)16O reaction at Elab=150 MeV incident energy

Authors: Ashok Kumar Mondal, C. Basu, S. Adhikari, C. Bhattacharya, T. K. Rana, S. Kundu, S. Manna, R. Pandey, P. Roy, A. Sen, J. K. Meena, A. K. Saha, J. K. Sahoo, Dipali Basak, Tanmay Bar, Haridas Pai, A. Bisoi, A. K. Mitra, Piyasi Biswas

Abstract: The 12C(20Ne,16O)16O α-transfer reaction at Elab=150 MeV is first time used to determine the ANC of the 6.92 MeV and 7.12 MeV states of 16O. The 20Ne+ 12C potential parameters are also obtained from elastic scattering. The direct reaction code FRESCO is used to determine the α-spectroscopy factor (Sα ) of the three states of 16O (6.92 MeV, 7.12 MeV and 11.52 MeV) and ANC of the two states (6.92 Me… ▽ More The 12C(20Ne,16O)16O α-transfer reaction at Elab=150 MeV is first time used to determine the ANC of the 6.92 MeV and 7.12 MeV states of 16O. The 20Ne+ 12C potential parameters are also obtained from elastic scattering. The direct reaction code FRESCO is used to determine the α-spectroscopy factor (Sα ) of the three states of 16O (6.92 MeV, 7.12 MeV and 11.52 MeV) and ANC of the two states (6.92 MeV and 7.12 MeV) of 16O. The extracted ANC and Sα are compareable to previous measurements. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 8 pages and 18 figures

Report number: 2001.02873

Do You Want Your Autonomous Car To Drive Like You?

Authors: Chandrayee Basu, Qian Yang, David Hungerman, Mukesh Singhal, Anca D. Dragan

Abstract: With progress in enabling autonomous cars to drive safely on the road, it is time to start asking how they should be driving. A common answer is that they should be adopting their users' driving style. This makes the assumption that users want their autonomous cars to drive like they drive - aggressive drivers want aggressive cars, defensive drivers want defensive cars. In this paper, we put that… ▽ More With progress in enabling autonomous cars to drive safely on the road, it is time to start asking how they should be driving. A common answer is that they should be adopting their users' driving style. This makes the assumption that users want their autonomous cars to drive like they drive - aggressive drivers want aggressive cars, defensive drivers want defensive cars. In this paper, we put that assumption to the test. We find that users tend to prefer a significantly more defensive driving style than their own. Interestingly, they prefer the style they think is their own, even though their actual driving style tends to be more aggressive. We also find that preferences do depend on the specific driving scenario, opening the door for new ways of learning driving style preference. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: 8 pages, 7 figures, HRI 2017

Learning from Richer Human Guidance: Augmenting Comparison-Based Learning with Feature Queries

Authors: Chandrayee Basu, Mukesh Singhal, Anca D. Dragan

Abstract: We focus on learning the desired objective function for a robot. Although trajectory demonstrations can be very informative of the desired objective, they can also be difficult for users to provide. Answers to comparison queries, asking which of two trajectories is preferable, are much easier for users, and have emerged as an effective alternative. Unfortunately, comparisons are far less informati… ▽ More We focus on learning the desired objective function for a robot. Although trajectory demonstrations can be very informative of the desired objective, they can also be difficult for users to provide. Answers to comparison queries, asking which of two trajectories is preferable, are much easier for users, and have emerged as an effective alternative. Unfortunately, comparisons are far less informative. We propose that there is much richer information that users can easily provide and that robots ought to leverage. We focus on augmenting comparisons with feature queries, and introduce a unified formalism for treating all answers as observations about the true desired reward. We derive an active query selection algorithm, and test these queries in simulation and on real users. We find that richer, feature-augmented queries can extract more information faster, leading to robots that better match user preferences in their behavior. △ Less

Submitted 5 February, 2018; originally announced February 2018.

Comments: 8 pages, 8 figures, HRI 2018

Tracking Motion and Proxemics using Thermal-sensor Array

Authors: Chandrayee Basu, Anthony Rowe

Abstract: Indoor tracking has all-pervasive applications beyond mere surveillance, for example in education, health monitoring, marketing, energy management and so on. Image and video based tracking systems are intrusive. Thermal array sensors on the other hand can provide coarse-grained tracking while preserving privacy of the subjects. The goal of the project is to facilitate motion detection and group pr… ▽ More Indoor tracking has all-pervasive applications beyond mere surveillance, for example in education, health monitoring, marketing, energy management and so on. Image and video based tracking systems are intrusive. Thermal array sensors on the other hand can provide coarse-grained tracking while preserving privacy of the subjects. The goal of the project is to facilitate motion detection and group proxemics modeling using an 8 x 8 infrared sensor array. Each of the 8 x 8 pixels is a temperature reading in Fahrenheit. We refer to each 8 x 8 matrix as a scene. We collected approximately 902 scenes with different configurations of human groups and different walking directions. We infer direction of motion of a subject across a set of scenes as left-to-right, right-to-left, up-to-down and down-to-up using cross-correlation analysis. We used features from connected component analysis of each background subtracted scene and performed Support Vector Machine classification to estimate number of instances of human subjects in the scene. △ Less

Submitted 25 November, 2015; originally announced November 2015.

Comments: 6 pages, 6 figures, Machine Learning for Signal Processing Class project

LEDs for Energy Efficient Greenhouse Lighting

Authors: Devesh Singh, Chandrajit Basu, Merve Meinhardt-Wollweber, Bernhard Roth

Abstract: Light energy is an important factor for plant growth. In regions where the natural light source, i.e. solar radiation, is not sufficient for growth optimization, additional light sources are being used. Traditional light sources such as high pressure sodium lamps and other metal halide lamps are not very efficient and generate high radiant heat. Therefore, new sustainable solutions should be devel… ▽ More Light energy is an important factor for plant growth. In regions where the natural light source, i.e. solar radiation, is not sufficient for growth optimization, additional light sources are being used. Traditional light sources such as high pressure sodium lamps and other metal halide lamps are not very efficient and generate high radiant heat. Therefore, new sustainable solutions should be developed for energy efficient greenhouse lighting. Recent developments in the field of light source technologies have opened up new perspectives for sustainable and highly efficient light sources in the form of light-emitting diodes, i.e. LEDs, for greenhouse lighting. This review focuses on the potential of LEDs to replace traditional light sources in the greenhouse. In a comparative economic analysis of traditional vs. LED lighting, we show that the introduction of LEDs allows reduction of the production cost of vegetables in the long-run of several years, due to the high energy efficiency, low maintenance cost and longevity of LEDs. In order to evaluate LEDs as a true alternative to current lighting sources, species specific plant response to different wavelengths is discussed in a comparative study. However, more detailed scientific studies are necessary to understand the effect of different LED spectra on plants physiology. Technical innovations are required to design and realize an energy efficient light source with a spectrum tailored for optimal plant growth in specific plant species. △ Less

Submitted 11 June, 2014; originally announced June 2014.

Comments: 22 pages, 7 figures

Report number: DS_CB_June2014

A Novel Light Source Design for Spectral Tuning in Biomedical Imaging

Authors: Chandrajit Basu, Sebastian Schlangen, Merve Meinhardt-Wollweber, Bernhard Roth

Abstract: We propose a novel architecture with a remote phosphor based modular and compact light source in a non-contact dermoscope prototype for skin cancer screening. The spectrum and color temperature of the output light can easily and significantly be changed depending on spectral absorption characteristics of the tissues being imaged. The new system has several advantages compared to state-of-the-art p… ▽ More We propose a novel architecture with a remote phosphor based modular and compact light source in a non-contact dermoscope prototype for skin cancer screening. The spectrum and color temperature of the output light can easily and significantly be changed depending on spectral absorption characteristics of the tissues being imaged. The new system has several advantages compared to state-of-the-art phosphor converted ultra-bright white LEDs, used in a wide range of medical imaging devices, which have a fixed spectrum and color temperature at a given operating point. In particular, the system can more easily be adapted to the requirements originating from different tissues in the human body which have wavelength dependent absorption and reflectivity. This leads to improved contrast for different kinds of imaged tissue components. The concept of such a lighting architecture can be vastly utilized in many other medical imaging devices including endoscopic systems. △ Less

Submitted 4 June, 2014; originally announced June 2014.

Comments: 10 pages, 8 figures

Report number: Basu_June_2014

Technical Paper Recommendation: A Study in Combining Multiple Information Sources

Authors: C. Basu, W. W. Cohen, H. Hirsh, C. Nevill-Manning

Abstract: The growing need to manage and exploit the proliferation of online data sources is opening up new opportunities for bringing people closer to the resources they need. For instance, consider a recommendation service through which researchers can receive daily pointers to journal papers in their fields of interest. We survey some of the known approaches to the problem of technical pa… ▽ More The growing need to manage and exploit the proliferation of online data sources is opening up new opportunities for bringing people closer to the resources they need. For instance, consider a recommendation service through which researchers can receive daily pointers to journal papers in their fields of interest. We survey some of the known approaches to the problem of technical paper recommendation and ask how they can be extended to deal with multiple information sources. More specifically, we focus on a variant of this problem - recommending conference paper submissions to reviewing committee members - which offers us a testbed to try different approaches. Using WHIRL - an information integration system - we are able to implement different recommendation algorithms derived from information retrieval principles. We also use a novel autonomous procedure for gathering reviewer interest information from the Web. We evaluate our approach and compare it to other methods using preference data provided by members of the AAAI-98 conference reviewing committee along with data about the actual submissions. △ Less

Submitted 1 June, 2011; originally announced June 2011.

Journal ref: Journal Of Artificial Intelligence Research, Volume 14, pages 231-252, 2001

Performance of An Axial Gas Ionization Detector

Authors: S. Adhikari, C. Basu, C. Samanta, S. S. Brahmachari, B. P. Das, P. Basu

Abstract: An axial gas ionization chamber has been fabricated for use as a $ΔE$ detector in heavy ion induced nuclear reactions. Different operating parameters such as gas type, pressure, anode voltage and anode structures have been optimized. The transparency of the anode structure is observed to play an important role in improving the energy resolution of the detector. An axial gas ionization chamber has been fabricated for use as a $ΔE$ detector in heavy ion induced nuclear reactions. Different operating parameters such as gas type, pressure, anode voltage and anode structures have been optimized. The transparency of the anode structure is observed to play an important role in improving the energy resolution of the detector. △ Less

Submitted 11 October, 2006; originally announced October 2006.

Comments: 19 pages, 7 figures

Journal ref: IEEETrans.Nucl.Sci.53:2270,2006

Magic Numbers from New Systematics

Authors: Chinmay Basu

Abstract: A new systematics from the separation energy of deuteron is used to examine the magicity of stable as well as nuclei towards dripline. A new systematics from the separation energy of deuteron is used to examine the magicity of stable as well as nuclei towards dripline. △ Less

Submitted 8 February, 2006; originally announced February 2006.

Comments: 11 pages, 4 figures, accepted for publication in IJMPE

Journal ref: Int.J.Mod.Phys. E15 (2006) 747-754

Entrance channel dependence in compound nuclear reactions with loosely bound nuclei

Authors: S. Adhikari, C. Samanta, C. Basu, S. Ray, A. Chattaerjee, S. Kailas

Abstract: The measurement of light charged particles evaporated from the reaction 6,7Li+6Li has been carried out at extreme backward angle in the energy range 14 - 20 MeV. Calculations from the code ALICE91 show that the symmetry of the target-projectile combination and the choice of level density parameter play important roles in explaining the evaporation spectra for these light particle systems. In abo… ▽ More The measurement of light charged particles evaporated from the reaction 6,7Li+6Li has been carried out at extreme backward angle in the energy range 14 - 20 MeV. Calculations from the code ALICE91 show that the symmetry of the target-projectile combination and the choice of level density parameter play important roles in explaining the evaporation spectra for these light particle systems. In above barrier energy region the fusion cross-section is not suppressed for these loosely bound nuclei. △ Less

Submitted 13 May, 2005; originally announced May 2005.

Comments: 2 pages, 1 figure

Journal ref: Eur.Phys.J. A25S1 (2005) 299-301

Level Curvature Distribution and the Structure of Eigenfunctions in Disordered Systems

Authors: C. Basu, C. M. Canali, V. E. Kravtsov, I. V. Yurkevich

Abstract: The level curvature distribution function is studied both analytically and numerically for the case of T-breaking perturbations over the orthogonal ensemble. The leading correction to the shape of the curvature distribution beyond the random matrix theory is calculated using the nonlinear supersymmetric sigma-model and compared to numerical simulations on the Anderson model. It is predicted anal… ▽ More The level curvature distribution function is studied both analytically and numerically for the case of T-breaking perturbations over the orthogonal ensemble. The leading correction to the shape of the curvature distribution beyond the random matrix theory is calculated using the nonlinear supersymmetric sigma-model and compared to numerical simulations on the Anderson model. It is predicted analytically and confirmed numerically that the sign of the correction is different for T-breaking perturbations caused by a constant vector-potential equivalent to a phase twist in the boundary conditions, and those caused by a random magnetic field. In the former case it is shown using a nonperturbative approach that quasi-localized states in weakly disordered systems can cause the curvature distribution to be nonanalytic. In $2d$ systems the distribution function $P(K)$ has a branching point at K=0 that is related to the multifractality of the wave functions and thus should be a generic feature of all critical eigenstates. A relationship between the branching power and the multifractality exponent $d_{2}$ is suggested. Evidence of the branch-cut singularity is found in numerical simulations in $2d$ systems and at the Anderson transition point in $3d$ systems. △ Less

Submitted 15 December, 1997; originally announced December 1997.

Comments: 34 pages (RevTeX), 8 figures (postscript)

Report number: APR 97-86

Distribution of level curvatures for the Anderson model at the localization-delocalization transition

Authors: C. M. Canali, Chaitali Basu, W. Stephan, V. E. Kravtsov

Abstract: We compute the distribution function of single-level curvatures, $P(k)$, for a tight binding model with site disorder, on a cubic lattice. In metals $P(k)$ is very close to the predictions of the random-matrix theory (RMT). In insulators $P(k)$ has a logarithmically-normal form. At the Anderson localization-delocalization transition $P(k)$ fits very well the proposed novel distribution… ▽ More We compute the distribution function of single-level curvatures, $P(k)$, for a tight binding model with site disorder, on a cubic lattice. In metals $P(k)$ is very close to the predictions of the random-matrix theory (RMT). In insulators $P(k)$ has a logarithmically-normal form. At the Anderson localization-delocalization transition $P(k)$ fits very well the proposed novel distribution $P(k)\propto (1+k^μ)^{3/μ}$ with $μ\approx 1.58$, which approaches the RMT result for large $k$ and is non-analytical at small $k$. We ascribe such a non-analiticity to the spatial multifractality of the critical wave functions. △ Less

Submitted 5 February, 1996; originally announced February 1996.

Comments: 4 ReVTeX pages and 4(.epsi)figures included in one uuencoded package

Report number: ICTP/95

The Origin of Non-chaotic Behavior in Identically Driven Systems

Authors: P. M. Gade, Chaitali Basu

Abstract: Recently it has been found that different physical systems driven by identical random noise behave exactly identical after a long time. It is also suggested that this is an outcome of finite precision in numerical experiments. Here we show that the origin of the non-chaotic behavior lies in the structural instability of the attractor of these systems which changes to a stable fixed point for str… ▽ More Recently it has been found that different physical systems driven by identical random noise behave exactly identical after a long time. It is also suggested that this is an outcome of finite precision in numerical experiments. Here we show that the origin of the non-chaotic behavior lies in the structural instability of the attractor of these systems which changes to a stable fixed point for strong enough drive. We see this to be true in all the systems studied in literature. Thus we affirm that in chaotic systems, synchronization can not occur only by addition of noise unless the noise destroys the strange attractor and the system is no longer chaotic. △ Less

Submitted 12 May, 1995; originally announced May 1995.

Comments: Figures could be obtained from gade@ictp.trieste.it. The document below is a latex file