-
First joint oscillation analysis of Super-Kamiokande atmospheric and T2K accelerator neutrino data
Authors:
Super-Kamiokande,
T2K collaborations,
:,
S. Abe,
K. Abe,
N. Akhlaq,
R. Akutsu,
H. Alarakia-Charles,
A. Ali,
Y. I. Alj Hakim,
S. Alonso Monsalve,
S. Amanai,
C. Andreopoulos,
L. H. V. Anthony,
M. Antonova,
S. Aoki,
K. A. Apte,
T. Arai,
T. Arihara,
S. Arimoto,
Y. Asada,
R. Asaka,
Y. Ashida,
E. T. Atkin,
N. Babu
, et al. (524 additional authors not shown)
Abstract:
The Super-Kamiokande and T2K collaborations present a joint measurement of neutrino oscillation parameters from their atmospheric and beam neutrino data. It uses a common interaction model for events overlapping in neutrino energy and correlated detector systematic uncertainties between the two datasets, which are found to be compatible. Using 3244.4 days of atmospheric data and a beam exposure of…
▽ More
The Super-Kamiokande and T2K collaborations present a joint measurement of neutrino oscillation parameters from their atmospheric and beam neutrino data. It uses a common interaction model for events overlapping in neutrino energy and correlated detector systematic uncertainties between the two datasets, which are found to be compatible. Using 3244.4 days of atmospheric data and a beam exposure of $19.7(16.3) \times 10^{20}$ protons on target in (anti)neutrino mode, the analysis finds a 1.9$σ$ exclusion of CP-conservation (defined as $J_{CP}=0$) and a preference for the normal mass ordering.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Multi-cell Coordinated Joint Sensing and Communications
Authors:
Nithin Babu,
Christos Masouros
Abstract:
This paper proposes block-level precoder (BLP) designs for a multi-input single-output (MISO) system that performs joint sensing and communication across multiple cells and users. The Cramer-Rao-Bound for estimating a target's azimuth angle is determined for coordinated beamforming (CBF) and coordinated multi-point (CoMP) scenarios while considering inter-cell communication and sensing links. The…
▽ More
This paper proposes block-level precoder (BLP) designs for a multi-input single-output (MISO) system that performs joint sensing and communication across multiple cells and users. The Cramer-Rao-Bound for estimating a target's azimuth angle is determined for coordinated beamforming (CBF) and coordinated multi-point (CoMP) scenarios while considering inter-cell communication and sensing links. The formulated optimization problems to minimize the CRB and maximize the minimum-signal-to-interference-plus-noise-ratio (SINR) are non-convex and are represented in the semidefinite relaxed (SDR) form to solve using an alternate optimization algorithm. The proposed solutions show improved performance compared to the baseline scenario that neglects the signal component from neighboring cells.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Precoding for Multi-Cell ISAC: from Coordinated Beamforming to Coordinated Multipoint and Bi-Static Sensing
Authors:
Nithin Babu,
Christos Masouros,
Constantinos B. Papadias,
Yonina C. Eldar
Abstract:
This paper proposes a framework for designing robust precoders for a multi-input single-output (MISO) system that performs integrated sensing and communication (ISAC) across multiple cells and users. We use Cramer-Rao-Bound (CRB) to measure the sensing performance and derive its expressions for two multi-cell scenarios, namely coordinated beamforming (CBF) and coordinated multi-point (CoMP). In th…
▽ More
This paper proposes a framework for designing robust precoders for a multi-input single-output (MISO) system that performs integrated sensing and communication (ISAC) across multiple cells and users. We use Cramer-Rao-Bound (CRB) to measure the sensing performance and derive its expressions for two multi-cell scenarios, namely coordinated beamforming (CBF) and coordinated multi-point (CoMP). In the CBF scheme, a BS shares channel state information (CSI) and estimates target parameters using monostatic sensing. In contrast, a BS in the CoMP scheme shares the CSI and data, allowing bistatic sensing through inter-cell reflection. We consider both block-level (BL) and symbol-level (SL) precoding schemes for both the multi-cell scenarios that are robust to channel state estimation errors. The formulated optimization problems to minimize the CRB in estimating the parameters of a target and maximize the minimum communication signal-to-interference-plus-noise-ratio (SINR) while satisfying a given total transmit power budget are non-convex. We tackle the non-convexity using a combination of semidefinite relaxation (SDR) and alternating optimization (AO) techniques. Simulations suggest that neglecting the inter-cell reflection and communication links degrades the performance of an ISAC system. The CoMP scenario employing SL precoding performs the best, whereas the BL precoding applied in the CBF scenario produces relatively high estimation error for a given minimum SINR value.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Density density correlation functions of chiral Luttinger liquids with a point contact impurity
Authors:
Nikhil Danny Babu,
Girish S. Setlur
Abstract:
The density density correlation function (most singular parts) of chiral Luttinger liquids forming the fractional quantum Hall effect (FQHE) edge is systematically derived in presence of a point-contact junction acting as a localised scalar impurity and is shown to be expressible as compact analytical functions with second order poles and involving the bare scale-independent reflection and transmi…
▽ More
The density density correlation function (most singular parts) of chiral Luttinger liquids forming the fractional quantum Hall effect (FQHE) edge is systematically derived in presence of a point-contact junction acting as a localised scalar impurity and is shown to be expressible as compact analytical functions with second order poles and involving the bare scale-independent reflection and transmission coefficients. The results are validated on comparison with standard fermionic perturbation theory. The linear response Hall conductance in the absence of a point-contact is recovered from the obtained density density correlation functions (DDCF). The system under consideration is inhomogeneous with broken translational invariance and for such systems in one dimension, the connected moments of the density fluctuation operator beyond second order need not be included in order to retreive the most singular parts of the correlations. The reason being that all odd moments of the density are zero and all higher order even moments are less singular than the quadratic moment. The implications of these results when used in conjunction with bosonization methods in presence of impurity backscattering is briefly discussed.
△ Less
Submitted 13 March, 2024; v1 submitted 16 December, 2023;
originally announced December 2023.
-
Tunneling density of states of fractional quantum Hall edges: an unconventional bosonization approach
Authors:
Nikhil Danny Babu,
Girish S. Setlur
Abstract:
An unconventional bosonization approach that employs a modified Fermi-Bose correspondence is used to obtain the tunneling density of states (TDOS) of fractional quantum Hall (FQHE) edges in the vicinity of a point contact. The chiral Luttinger liquid model is generally used to describe FQHE edge excitations. We introduce a bosonization procedure to study edge state transport in Laughlin states at…
▽ More
An unconventional bosonization approach that employs a modified Fermi-Bose correspondence is used to obtain the tunneling density of states (TDOS) of fractional quantum Hall (FQHE) edges in the vicinity of a point contact. The chiral Luttinger liquid model is generally used to describe FQHE edge excitations. We introduce a bosonization procedure to study edge state transport in Laughlin states at filling $ν= 1/m$ with $m$ odd (single edge mode) in the presence of a point contact constriction that brings the top and bottom edges of the sample into close proximity. The unconventional bosonization involves modifying the Fermi-Bose correspondence to incorporate backscattering at the point contact, leaving the action of the theory purely quadratic even in presence of the inhomogeneity. We have shown convincingly in earlier works that this procedure correctly reproduces the most singular parts of the Green functions of the system even when mutual forward scattering between fermions are included. The most singular part of the density-density correlation function (DDCF) relevant to TDOS calculation is computed using a generating functional approach. The TDOS for both the electron tunneling as well as the Laughlin quasiparticle tunneling cases is obtained and is found to agree with previous results in the literature. For electron tunneling the well-known universal power laws for TDOS viz. $ \sim \mbox{ }ω^{ m-1 }$ and for quasi-particle tunneling the power law $ \sim \mbox{ } ω^{ \frac{1}{m}-1 } $ are both correctly recovered using our unconventional bosonization scheme. This demonstrates convincingly the utility of the present method which unlike conventional approaches, does not treat the point-contact as an afterthought and yet remains solvable so long as only the most singular parts of the correlation functions are desired.
△ Less
Submitted 27 November, 2023; v1 submitted 16 October, 2023;
originally announced October 2023.
-
Evaluation of Deep Neural Operator Models toward Ocean Forecasting
Authors:
Ellery Rajagopal,
Anantha N. S. Babu,
Tony Ryu,
Patrick J. Haley Jr.,
Chris Mirabito,
Pierre F. J. Lermusiaux
Abstract:
Data-driven, deep-learning modeling frameworks have been recently developed for forecasting time series data. Such machine learning models may be useful in multiple domains including the atmospheric and oceanic ones, and in general, the larger fluids community. The present work investigates the possible effectiveness of such deep neural operator models for reproducing and predicting classic fluid…
▽ More
Data-driven, deep-learning modeling frameworks have been recently developed for forecasting time series data. Such machine learning models may be useful in multiple domains including the atmospheric and oceanic ones, and in general, the larger fluids community. The present work investigates the possible effectiveness of such deep neural operator models for reproducing and predicting classic fluid flows and simulations of realistic ocean dynamics. We first briefly evaluate the capabilities of such deep neural operator models when trained on a simulated two-dimensional fluid flow past a cylinder. We then investigate their application to forecasting ocean surface circulation in the Middle Atlantic Bight and Massachusetts Bay, learning from high-resolution data-assimilative simulations employed for real sea experiments. We confirm that trained deep neural operator models are capable of predicting idealized periodic eddy shedding. For realistic ocean surface flows and our preliminary study, they can predict several of the features and show some skill, providing potential for future research and applications.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Sustainable Wireless Services with UAV Swarms Tailored to Renewable Energy Sources
Authors:
Igor Donevski,
Marco Virgili,
Nithin Babu,
Jimmy Jessen Nielsen,
Andrew J. Forsyth,
Constantinos B. Papadias,
Petar Popovski
Abstract:
Unmanned Aerial Vehicle (UAV) swarms are often required in off-grid scenarios, such as disaster-struck, war-torn or rural areas, where the UAVs have no access to the power grid and instead rely on renewable energy. Considering a main battery fed from two renewable sources, wind and solar, we scale such a system based on the financial budget, environmental characteristics, and seasonal variations.…
▽ More
Unmanned Aerial Vehicle (UAV) swarms are often required in off-grid scenarios, such as disaster-struck, war-torn or rural areas, where the UAVs have no access to the power grid and instead rely on renewable energy. Considering a main battery fed from two renewable sources, wind and solar, we scale such a system based on the financial budget, environmental characteristics, and seasonal variations. Interestingly, the source of energy is correlated with the energy expenditure of the UAVs, since strong winds cause UAV hovering to become increasingly energy-hungry. The aim is to maximize the cost efficiency of coverage at a particular location, which is a combinatorial optimization problem for dimensioning of the multivariate energy generation system under non-convex criteria. We have devised a customized algorithm by lowering the processing complexity and reducing the solution space through sampling. Evaluation is done with condensed real-world data on wind, solar energy, and traffic load per unit area, driven by vendor-provided prices. The implementation was tested in four locations, with varying wind or solar intensity. The best results were achieved in locations with mild wind presence and strong solar irradiation, while locations with strong winds and low solar intensity require higher Capital Expenditure (CAPEX) allocation.
△ Less
Submitted 23 November, 2022; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Energy-Efficient Trajectory Design of a Multi-IRS Assisted Portable Access Point
Authors:
Nithin Babu,
Marco Virgili,
Mohammad Al-jarrah,
Xiaoye Jing,
Emad Alsusa,
Petar Popovski,
Andrew Forsyth,
Christos Masouros,
Constantinos B. Papadias
Abstract:
In this work, we propose a framework for energy-efficient trajectory design of an unmanned aerial vehicle (UAV)-based portable access point (PAP) deployed to serve a set of ground nodes (GNs). In addition to the PAP and GNs, the system consists of a set of intelligent reflecting surfaces (IRSs) mounted on man-made structures to increase the number of bits transmitted per Joule of energy consumed m…
▽ More
In this work, we propose a framework for energy-efficient trajectory design of an unmanned aerial vehicle (UAV)-based portable access point (PAP) deployed to serve a set of ground nodes (GNs). In addition to the PAP and GNs, the system consists of a set of intelligent reflecting surfaces (IRSs) mounted on man-made structures to increase the number of bits transmitted per Joule of energy consumed measured as the global energy efficiency (GEE). The GEE trajectory for the PAP is designed by considering the UAV propulsion energy consumption and the Peukert effect of the PAP battery, which represents an accurate battery discharge profile as a non-linear function of the UAV power consumption profile. The GEE trajectory design problem is solved in two phases: in the first, a path for the PAP and feasible positions for the IRS modules are found using a multi-tier circle packing method, and the required IRS phase shift values are calculated using an alternate optimization method that considers the interdependence between the amplitude and phase responses of an IRS element; in the second phase, the PAP flying velocity and user scheduling are calculated using a novel multilap trajectory design algorithm. Numerical evaluations show that: neglecting the Peukert effect overestimates the available flight time of the PAP; after a certain threshold, increasing the battery size reduces the available flight time of the PAP; the presence of IRS modules improves the GEE of the system compared to other baseline scenarios; the multi-lap trajectory saves more energy compared to a single-lap trajectory developed using a combination of sequential convex programming and Dinkelbach algorithm.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Cost-Efficient Deployment of a Reliable Multi-UAV Unmanned Aerial System
Authors:
Nithin Babu,
Petar Popovski,
Constantinos B. Papadias
Abstract:
In this work, we study the trade-off between the reliability and the investment cost of an unmanned aerial system (UAS) consisting of a set of unmanned aerial vehicles (UAVs) carrying radio access nodes, called portable access points (PAPs)), deployed to serve a set of ground nodes (GNs). Using the proposed algorithm, a given geographical region is equivalently represented as a set of circular reg…
▽ More
In this work, we study the trade-off between the reliability and the investment cost of an unmanned aerial system (UAS) consisting of a set of unmanned aerial vehicles (UAVs) carrying radio access nodes, called portable access points (PAPs)), deployed to serve a set of ground nodes (GNs). Using the proposed algorithm, a given geographical region is equivalently represented as a set of circular regions, where each circle represents the coverage region of a PAP. Then, the steady-state availability of the UAS is analytically derived by modelling it as a continuous time birth-death Markov decision process (MDP). Numerical evaluations show that the investment cost to guarantee a given steady-state availability to a set of GNs can be reduced by considering the traffic demand and distribution of GNs.
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
Fairness Based Energy-Efficient 3D Path Planning of a Portable Access Point: A Deep Reinforcement Learning Approach
Authors:
Nithin Babu,
Igor Donevski,
Alvaro Valcarce,
Petar Popovski,
Jimmy Jessen Nielsen,
Constantinos B. Papadias
Abstract:
In this work, we optimize the 3D trajectory of an unmanned aerial vehicle (UAV)-based portable access point (PAP) that provides wireless services to a set of ground nodes (GNs). Moreover, as per the Peukert effect, we consider pragmatic non-linear battery discharge for the battery of the UAV. Thus, we formulate the problem in a novel manner that represents the maximization of a fairness-based ener…
▽ More
In this work, we optimize the 3D trajectory of an unmanned aerial vehicle (UAV)-based portable access point (PAP) that provides wireless services to a set of ground nodes (GNs). Moreover, as per the Peukert effect, we consider pragmatic non-linear battery discharge for the battery of the UAV. Thus, we formulate the problem in a novel manner that represents the maximization of a fairness-based energy efficiency metric and is named fair energy efficiency (FEE). The FEE metric defines a system that lays importance on both the per-user service fairness and the energy efficiency of the PAP. The formulated problem takes the form of a non-convex problem with non-tractable constraints. To obtain a solution, we represent the problem as a Markov Decision Process (MDP) with continuous state and action spaces. Considering the complexity of the solution space, we use the twin delayed deep deterministic policy gradient (TD3) actor-critic deep reinforcement learning (DRL) framework to learn a policy that maximizes the FEE of the system. We perform two types of RL training to exhibit the effectiveness of our approach: the first (offline) approach keeps the positions of the GNs the same throughout the training phase; the second approach generalizes the learned policy to any arrangement of GNs by changing the positions of GNs after each training episode. Numerical evaluations show that neglecting the Peukert effect overestimates the air-time of the PAP and can be addressed by optimally selecting the PAP's flying speed. Moreover, the user fairness, energy efficiency, and hence the FEE value of the system can be improved by efficiently moving the PAP above the GNs. As such, we notice massive FEE improvements over baseline scenarios of up to 88.31%, 272.34%, and 318.13% for suburban, urban, and dense urban environments, respectively.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Unconventional bosonization of chiral quantum wires coupled through a point-contact driven out of equilibrium
Authors:
Nikhil Danny Babu,
Girish S. Setlur
Abstract:
Non-chiral bosonization technique adapted to study chiral quantum wires with non-interacting fermions coupled through a point-contact with a constant bias between the wires is introduced and is shown to reproduce the exact Green functions of this system which was previously derived by the present authors analytically using standard methods. The tunneling I-V characteristics are obtained using the…
▽ More
Non-chiral bosonization technique adapted to study chiral quantum wires with non-interacting fermions coupled through a point-contact with a constant bias between the wires is introduced and is shown to reproduce the exact Green functions of this system which was previously derived by the present authors analytically using standard methods. The tunneling I-V characteristics are obtained using the bosonized Green functions. The proposed unconventional bosonization scheme is also shown to be internally consistent as the four-point functions evaluated using NCBT are shown to be related to the two-point functions through Wick's theorem as it should be. In equilibrium, the equal space-time NCBT Green functions for an interacting Luttinger liquid with impurities obtained in a previous work shows universal scaling behaviour in accordance with Bethe ansatz and functional renormalization group predictions. We expect to obtain a similar scaling form of the tunneling properties out of equilibrium in presence of interparticle interactions.
△ Less
Submitted 3 January, 2023; v1 submitted 28 April, 2022;
originally announced April 2022.
-
Non-Markovian transients in transport across chiral quantum wires using space-time non-equilibrium Green functions
Authors:
Nikhil Danny Babu,
Girish S. Setlur
Abstract:
We study a system of two non-interacting quantum wires with fermions of opposite chirality with a point contact junction at the origin across which tunneling can take place when an arbitrary time-dependent bias between the wires is applied. We obtain the exact dynamical non-equilibrium Green function by solving Dyson's equation analytically. Both the space-time dependent two and four-point functio…
▽ More
We study a system of two non-interacting quantum wires with fermions of opposite chirality with a point contact junction at the origin across which tunneling can take place when an arbitrary time-dependent bias between the wires is applied. We obtain the exact dynamical non-equilibrium Green function by solving Dyson's equation analytically. Both the space-time dependent two and four-point functions are written down in a closed form in terms of simple functions of position and time. This allows us to obtain, among other things, the I-V characteristics for an arbitrary time-dependent bias. Our method is a superior alternative to competing approaches to non-equilibrium as we are able to account for transient phenomena as well as the steady state. We study the approach to steady state by computing the time evolution of the equal-time one-particle Green function. Our method can be easily applied to the problem of a double barrier contact whose internal properties can be adjusted to induce resonant tunneling leading to a conductance maximum. We then consider the case of a finite bandwidth in the point contact and calculate the non-equilibrium transport properties which exhibit non-Markovian behaviour. When a subsequently constant bias is suddenly switched on, the current shows a transient build up before approaching its steady state value in contrast to the infinite bandwidth case. This transient property is consistent with numerical simulations of lattice systems using time-dependent DMRG (tDMRG) suggesting thereby that this transient build up is merely due to the presence of a short distance cutoff in the problem description and not on the other details.
△ Less
Submitted 18 January, 2022; v1 submitted 11 July, 2021;
originally announced July 2021.
-
Energy-Efficient 3D Deployment of Aerial Access Points in a UAV Communication System
Authors:
Nithin Babu,
Constantinos B. Papadias,
Petar Popovski
Abstract:
In this letter, we propose an energy-efficient 3-dimensional placement of multiple aerial access points (AAPs), in the desired area, acting as flying base stations for uplink communication from a set of ground user equipment (UE). The globally optimal energy-efficient vertical position of AAPs is derived analytically by considering the inter-cell interference and AAP energy consumption. The horizo…
▽ More
In this letter, we propose an energy-efficient 3-dimensional placement of multiple aerial access points (AAPs), in the desired area, acting as flying base stations for uplink communication from a set of ground user equipment (UE). The globally optimal energy-efficient vertical position of AAPs is derived analytically by considering the inter-cell interference and AAP energy consumption. The horizontal position of AAPs which maximize the packing density of the AAP coverage area are determined using a novel regular polygon-based AAP placement algorithm. We also determine the maximum number of non-interfering AAPs that can be placed in the desired area. The effect of the AAP energy consumption on the optimal placement and the analytic findings are verified via numerical simulations.
△ Less
Submitted 27 March, 2021;
originally announced April 2021.
-
Energy Efficient Altitude Optimization of an Aerial Access Point
Authors:
Nithin Babu,
Konstantinos Ntougias,
Constantinos B Papadias,
Petar Popovski
Abstract:
In this paper, we propose an energy-efficient optimal altitude for an aerial access point (AAP), which acts as a flying base station to serve a set of ground user equipment (UE). Since the ratio of total energy consumed by the aerial vehicle to the communication energy is very large, we include the aerial vehicle's energy consumption in the problem formulation. After considering the energy consump…
▽ More
In this paper, we propose an energy-efficient optimal altitude for an aerial access point (AAP), which acts as a flying base station to serve a set of ground user equipment (UE). Since the ratio of total energy consumed by the aerial vehicle to the communication energy is very large, we include the aerial vehicle's energy consumption in the problem formulation. After considering the energy consumption model of the aerial vehicle, our objective is translated into a non-convex optimization problem of maximizing the global energy efficiency (GEE) of the aerial communication system, subject to altitude and minimum individual data rate constraints. At first, the non-convex fractional objective function is solved by using sequential convex programming (SCP) optimization technique. To compare the result of SCP with the global optimum of the problem, we reformulate the initial problem as a monotonic fractional optimization problem (MFP) and solve it using the polyblock outer approximation (PA) algorithm. Numerical results show that the candidate solution obtained from SCP is the same as the global optimum found using the monotonic fractional programming technique. Furthermore, the impact of the aerial vehicle's energy consumption on the optimal altitude determination is also studied.
△ Less
Submitted 27 March, 2021;
originally announced March 2021.
-
The studies on phonons and magnons in (Ni80Fe20/Au/Co/Au) multilayers of different number of repetitions
Authors:
M. Zdunek,
A. Trzaskowska,
J. W. Kłos,
N. K. P. Babu,
S. Mielcarek
Abstract:
In Ni80Fe20/Au/Co/Au deposited on silicon substrate the interaction between spin waves and surface acoustic waves is observed by Brillion light scattering spectroscopy. We show that by changing the number of receptions in the multilayer we can tune the dispersion of surface acoustic waves (SAWs) not affecting significantly fundamentals spin wave (SW) mode. As a result, we can control (activate or…
▽ More
In Ni80Fe20/Au/Co/Au deposited on silicon substrate the interaction between spin waves and surface acoustic waves is observed by Brillion light scattering spectroscopy. We show that by changing the number of receptions in the multilayer we can tune the dispersion of surface acoustic waves (SAWs) not affecting significantly fundamentals spin wave (SW) mode. As a result, we can control (activate or deactivate) the magnetoelastic interaction between fundamental SW mode and SAWs by the thickness of the magnetostrictive multilayer.
△ Less
Submitted 25 March, 2024; v1 submitted 3 March, 2021;
originally announced March 2021.
-
Early Work on Efficient Patching for Coordinating Edge Applications
Authors:
Naveen T. R. Babu,
Christopher Stewart
Abstract:
Multiple applications running on Edge computers can be orchestrated to achieve the desired goal. Orchestration of applications is prominent when working with Internet of Things based applications, Autonomous driving and Autonomous Aerial vehicles. As the applications receive modified classifiers/code, there will be multiple applications that need to be updated. If all the classifiers are synchrono…
▽ More
Multiple applications running on Edge computers can be orchestrated to achieve the desired goal. Orchestration of applications is prominent when working with Internet of Things based applications, Autonomous driving and Autonomous Aerial vehicles. As the applications receive modified classifiers/code, there will be multiple applications that need to be updated. If all the classifiers are synchronously updated there would be increased throughput and bandwidth degradation. On the other hand, delaying updates of applications which need immediate update hinders performance and delays progress towards end goal. The updates of applications should be prioritized and updates should happen according to this priority. This paper explores the setup and benchmarks to understand the impact of updates when multiple applications working to achieve same objective are orchestrated with prioritized updates. We discuss methods to build a distributed, reliable and scalable system called "DSOC"(Docker Swarm Orchestration Component).
△ Less
Submitted 2 January, 2021;
originally announced January 2021.
-
Density-density Correlation Function of Strongly Inhomogeneous Luttinger Liquids
Authors:
Nikhil Danny Babu,
Joy Prakash Das,
Girish S. Setlur
Abstract:
In this work, we show in pedagogical detail that the most singular contributions to the slow part of the asymptotic density-density correlation function of Luttinger liquids with fermions interacting mutually with only short-range forward scattering and also with localised scalar static impurities (where backward scattering takes place) has a compact analytical expression in terms of simple functi…
▽ More
In this work, we show in pedagogical detail that the most singular contributions to the slow part of the asymptotic density-density correlation function of Luttinger liquids with fermions interacting mutually with only short-range forward scattering and also with localised scalar static impurities (where backward scattering takes place) has a compact analytical expression in terms of simple functions that have second order poles and involve only the scale-independent bare transmission and reflection coefficients. This proof uses conventional fermionic perturbation theory resummed to all orders, together with the idea that for such systems, the (connected) moments of the density operator all vanish beyond the second order - the odd ones vanish identically and the higher order even moments are less singular than the second order moment which is the only one included. This important result is the crucial input to the recently introduced "Non-Chiral Bosonization Technique" (NCBT) to study such systems. The results of NCBT cannot be easily compared with the results obtained using conventional bosonization as the former only extracts the most singular parts of the correlation functions albeit for arbitrary impurity strengths and mutual interactions. The latter, ambitiously attempts to study all the parts of the asymptotic correlation functions and is thereby unable to find simple analytical expressions and is forced to operate in the vicinity of the homogeneous system or the half line (the opposite extreme). For a fully homogeneous system or its antithesis viz. the half-line, all the higher order connected moments of the density vanish identically which means the results of chiral bosonization and NCBT ought to be the same and indeed they are.
△ Less
Submitted 7 October, 2020; v1 submitted 18 January, 2020;
originally announced January 2020.
-
Understanding the Mechanisms of Deep Transfer Learning for Medical Images
Authors:
Hariharan Ravishankar,
Prasad Sudhakar,
Rahul Venkataramani,
Sheshadri Thiruvenkadam,
Pavan Annangi,
Narayanan Babu,
Vivek Vaidya
Abstract:
The ability to automatically learn task specific feature representations has led to a huge success of deep learning methods. When large training data is scarce, such as in medical imaging problems, transfer learning has been very effective. In this paper, we systematically investigate the process of transferring a Convolutional Neural Network, trained on ImageNet images to perform image classifica…
▽ More
The ability to automatically learn task specific feature representations has led to a huge success of deep learning methods. When large training data is scarce, such as in medical imaging problems, transfer learning has been very effective. In this paper, we systematically investigate the process of transferring a Convolutional Neural Network, trained on ImageNet images to perform image classification, to kidney detection problem in ultrasound images. We study how the detection performance depends on the extent of transfer. We show that a transferred and tuned CNN can outperform a state-of-the-art feature engineered pipeline and a hybridization of these two techniques achieves 20\% higher performance. We also investigate how the evolution of intermediate response images from our network. Finally, we compare these responses to state-of-the-art image processing filters in order to gain greater insight into how transfer learning is able to effectively manage widely varying imaging regimes.
△ Less
Submitted 20 April, 2017;
originally announced April 2017.
-
Two-Level Spatial Multiplexing using Hybrid Beamforming Antenna Arrays for mmWave Communications
Authors:
Xiaohang Song,
Nithin Babu,
Wolfgang Rave,
Sudhan Majhi,
Gerhard Fettweis
Abstract:
In this work, we consider a two-level hierarchical MIMO antenna array system, where each antenna of the upper level is made up of a subarray on the lower one. The concept of spatial multiplexing is applied twice in this situation: Firstly, the spatial multiplexing of a Line-of-Sight (LoS) MIMO system is exploited. It is based on appropriate (sub-)array distances and achieves multiplexing gain due…
▽ More
In this work, we consider a two-level hierarchical MIMO antenna array system, where each antenna of the upper level is made up of a subarray on the lower one. The concept of spatial multiplexing is applied twice in this situation: Firstly, the spatial multiplexing of a Line-of-Sight (LoS) MIMO system is exploited. It is based on appropriate (sub-)array distances and achieves multiplexing gain due to phase differences among the signals at the receive (sub-)arrays. Secondly, one or more additional reflected paths of different angles (separated from the LoS path by different spatial beams at the subarrays) are used to exploit spatial multiplexing between paths.
By exploiting the above two multiplexing kinds simultaneously, a high dimensional system with maximum spatial multiplexing is proposed by jointly using 'phase differences' within paths and 'angular differences' between paths. The system includes an advanced hybrid beamforming architecture with large subarray separation, which could occur in millimeter wave backhaul scenarios. The possible gains of the system w.r.t. a pure LOS MIMO system are illustrated by evaluating the capacities with total transmit power constraints.
△ Less
Submitted 29 July, 2016;
originally announced July 2016.
-
A Trapped Field of >3T in Bulk MgB2 Fabricated by Uniaxial Hot Pressing
Authors:
J. H. Durrell,
C. E. J. Dancer,
A. Dennis,
Y. Shi,
Z. Xu,
A. M. Campbell,
N. H. Babu,
R. I. Todd,
C. R. M. Grovenor,
D. A. Cardwell
Abstract:
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data…
▽ More
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data using the Biot-Savart law is consistent with the measured local critical current density. From this we conclude that critical current density, and therefore trapped field performance, is limited by the flux pinning available in MgB2, rather than by lack of connectivity. This suggests strongly that both increasing sample size and enhancing pinning through doping will allow further increases in trapped field performance of bulk MgB2.
△ Less
Submitted 28 September, 2012; v1 submitted 30 July, 2012;
originally announced July 2012.
-
The spin anisotropy of the magnetic excitations in the normal and superconducting states of optimally doped YBa2Cu3O6.9 studied by polarized neutron spectroscopy
Authors:
N. S. Headings,
S. M. Hayden,
J. Kulda,
N. Hari Babu,
D. A. Cardwell
Abstract:
We use inelastic neutron scattering with spin polarization analysis to study the magnetic excitations in the normal and superconducting states of YBa2Cu3O6.9. Polarization analysis allows us to determine the spin polarization of the magnetic excitations and to separate them from phonon scattering. In the normal state, we find unambiguous evidence of magnetic excitations over the 10-60meV range of…
▽ More
We use inelastic neutron scattering with spin polarization analysis to study the magnetic excitations in the normal and superconducting states of YBa2Cu3O6.9. Polarization analysis allows us to determine the spin polarization of the magnetic excitations and to separate them from phonon scattering. In the normal state, we find unambiguous evidence of magnetic excitations over the 10-60meV range of the experiment with little polarization dependence to the excitations. In the superconducting state, the magnetic response is enhanced near the "resonance energy" and above. At lower energies, 10<E<30meV, the local susceptibility becomes anisotropic, with the excitations polarized along the c-axis being suppressed. We find evidence for a new diffuse anisotropic response polarized perpendicular to the c-axis which may carry significant spectral weight.
△ Less
Submitted 4 June, 2011; v1 submitted 31 January, 2011;
originally announced January 2011.
-
Magneto-thermal phenomena in bulk high temperature superconductors subjected to applied AC magnetic fields
Authors:
P Vanderbemden,
P Laurent,
J-F Fagnard,
M Ausloos,
N Hari Babu,
D A Cardwell
Abstract:
In the present work we study, both theoretically and experimentally, the temperature increase in a bulk high-temperature superconductor subjected to applied AC magnetic fields of large amplitude. We calculate analytically the equilibrium temperatures of the bulk sample as a function of the experimental parameters using a simple critical-state model for an infinitely long type-II superconducting sl…
▽ More
In the present work we study, both theoretically and experimentally, the temperature increase in a bulk high-temperature superconductor subjected to applied AC magnetic fields of large amplitude. We calculate analytically the equilibrium temperatures of the bulk sample as a function of the experimental parameters using a simple critical-state model for an infinitely long type-II superconducting slab or cylinder. The results show the existence of a limit heat transfer coefficient (AUlim) separating two thermal regimes with different characteristics. The theoretical analysis predicts a "forbidden" temperature window within which the temperature of the superconductor can never stabilize when the heat transfer coefficient is small. In addition, we determine an analytical expression of two threshold fields Htr1 and Htr2 characterizing the importance of magneto-thermal effects and show that a thermal runaway always occurs when the field amplitude is larger than Htr2. The theoretical predictions of the temperature evolution of the bulk sample during a self-heating process agree well with the experimental data. The simple analytical study presented in this paper enables order of magnitude thermal effects to be estimated for simple superconductor geometries under applied AC magnetic fields and can be used to predict the influence of experimental parameters on the self-heating characteristics of bulk type-II superconductors.
△ Less
Submitted 8 May, 2010;
originally announced May 2010.
-
Rank Distance Bicodes and their Generalization
Authors:
W. B. Vasantha Kandasamy,
Florentin Smarandache,
N. Suresh Babu,
R. S. Selvaraj
Abstract:
This book has four chapters. In chapter one we just recall the notion of RD codes, MRD codes, circulant rank codes and constant rank codes and describe their properties. In chapter two we introduce few new classes of codes and study some of their properties. In this chapter we introduce the notion of fuzzy RD codes and fuzzy RD bicodes. Rank distance m-codes are introduced in chapter three and the…
▽ More
This book has four chapters. In chapter one we just recall the notion of RD codes, MRD codes, circulant rank codes and constant rank codes and describe their properties. In chapter two we introduce few new classes of codes and study some of their properties. In this chapter we introduce the notion of fuzzy RD codes and fuzzy RD bicodes. Rank distance m-codes are introduced in chapter three and the property of m-covering radius is analysed. Chapter four indicates some applications of these new classes of codes.
△ Less
Submitted 16 April, 2010;
originally announced April 2010.
-
An AC susceptometer for the characterization of large, bulk superconducting samples
Authors:
P Laurent,
J F Fagnard,
B Vanderheyden,
N Hari Babu,
D A Cardwell,
M Ausloos,
P Vanderbemden
Abstract:
The main purpose of this work was to design, develop and construct a simple, low-cost AC susceptometer to measure large, bulk superconducting samples (up to 32 mm in diameter) in the temperature range 78-120 K. The design incorporates a double heating system that enables a high heating rate (25 K/hour) while maintaining a small temperature gradient (< 0.2 K) across the sample. The apparatus can…
▽ More
The main purpose of this work was to design, develop and construct a simple, low-cost AC susceptometer to measure large, bulk superconducting samples (up to 32 mm in diameter) in the temperature range 78-120 K. The design incorporates a double heating system that enables a high heating rate (25 K/hour) while maintaining a small temperature gradient (< 0.2 K) across the sample. The apparatus can be calibrated precisely using a copper coil connected in series with the primary coil. The system has been used successfully to measure the temperature dependence of the AC magnetic properties of entire RE-Ba-Cu-O [(RE)BCO] bulk superconducting domains. A typical AC susceptibility measurement run from 78 K to 95 K takes about 2 hours, with excellent temperature resolution (temperature step ~ 4 mK) around the critical temperature, in particular.
△ Less
Submitted 9 May, 2008;
originally announced May 2008.
-
Remagnetization of bulk high-temperature superconductors subjected to crossed and rotating magnetic fields
Authors:
P Vanderbemden,
Z Hong,
T A Coombs,
M Ausloos,
N Hari Babu,
D A Cardwell,
A M Campbell
Abstract:
Bulk melt-processed Y-Ba-Cu-O (YBCO) has significant potential for a variety of high field permanent magnet-like applications, such as the rotor of a brushless motor. When used in rotating devices of this kind, however, the YBCO can be subjected to both transient and alternating magnetic fields that are not parallel to the direction of magnetization and which have a detrimental effect on the tra…
▽ More
Bulk melt-processed Y-Ba-Cu-O (YBCO) has significant potential for a variety of high field permanent magnet-like applications, such as the rotor of a brushless motor. When used in rotating devices of this kind, however, the YBCO can be subjected to both transient and alternating magnetic fields that are not parallel to the direction of magnetization and which have a detrimental effect on the trapped field. These effects may lead to a long-term decay of the magnetization of the bulk sample. In the present work, we analyze both experimentally and numerically the remagnetization process of a melt-processed YBCO single domain that has been partially demagnetized by a magnetic field applied orthogonal to the initial direction of trapped flux. Magnetic torque measurements are used as a tool to probe changes in the remanent magnetization during various sequences of applied field. The application of a small magnetic field between the transverse cycles parallel to the direction of original magnetization results in partial remagnetization of the sample. Rotating the applied field, however, is found to be much more efficient at remagnetizing the bulk material than applying a magnetizing field pulse of the same amplitude. The principal features of the experimental data can be reproduced qualitatively using a two-dimensional finite-element numerical model based on an E-J power law. Finally, the remagnetization process is shown to result from the complex modification of current distribution within the cross-section of the bulk sample.
△ Less
Submitted 14 March, 2007;
originally announced March 2007.
-
Behavior of bulk high-temperature superconductors of finite thickness subjected to crossed magnetic fields
Authors:
Ph. Vanderbemden,
Z. Hong,
T. A. Coombs,
S. Denis,
M. Ausloos,
J. Schwartz,
I. B. Rutel,
N. Hari Babu,
D. A. Cardwell,
A. M. Campbell
Abstract:
Crossed magnetic field effects on bulk high-temperature superconductors have been studied both experimentally and numerically. The sample geometry investigated involves finite-size effects along both (crossed) magnetic field directions. The experiments were carried out on bulk melt-processed Y-Ba-Cu-O (YBCO) single domains that had been pre-magnetized with the applied field parallel to their sho…
▽ More
Crossed magnetic field effects on bulk high-temperature superconductors have been studied both experimentally and numerically. The sample geometry investigated involves finite-size effects along both (crossed) magnetic field directions. The experiments were carried out on bulk melt-processed Y-Ba-Cu-O (YBCO) single domains that had been pre-magnetized with the applied field parallel to their shortest direction (i.e. the c-axis) and then subjected to several cycles of the application of a transverse magnetic field parallel to the sample ab plane. The magnetic properties were measured using orthogonal pick-up coils, a Hall probe placed against the sample surface and Magneto-Optical Imaging (MOI). We show that all principal features of the experimental data can be reproduced qualitatively using a two-dimensional finite-element numerical model based on an E-J power law and in which the current density flows perpendicularly to the plane within which the two components of magnetic field are varied. The results of this study suggest that the suppression of the magnetic moment under the action of a transverse field can be predicted successfully by ignoring the existence of flux-free configurations or flux-cutting effects. These investigations show that the observed decay in magnetization results from the intricate modification of current distribution within the sample cross-section. It is also shown that the model does not predict any saturation of the magnetic induction, even after a large number (~ 100) of transverse field cycles. These features are shown to be consistent with the experimental data.
△ Less
Submitted 10 May, 2007; v1 submitted 13 March, 2007;
originally announced March 2007.
-
Neutron Irradiation of MgB2 Bulk Superconductors
Authors:
M. Eisterer,
M. Zehetmayer,
S. Toenies,
H. W. Weber,
M. Kambara,
N. Hari Babu,
D. A. Cardwell,
L. R. Greenwood
Abstract:
Sintered samples of MgB2 were irradiated in a fission reactor. Defects in the bulk microstructure are produced during this process mainly by the 10B(n,a)7Li reaction while collisions of fast neutrons with the lattice atoms induce much less damage. Self-shielding effects turn out to be very important and lead to a highly inhomogeneous defect distribution in the irradiated samples. The resulting d…
▽ More
Sintered samples of MgB2 were irradiated in a fission reactor. Defects in the bulk microstructure are produced during this process mainly by the 10B(n,a)7Li reaction while collisions of fast neutrons with the lattice atoms induce much less damage. Self-shielding effects turn out to be very important and lead to a highly inhomogeneous defect distribution in the irradiated samples. The resulting disorder enhances the normal state resistivity and the upper critical field. The irreversibility line shifts to higher fields at low temperatures and the measured critical current densities increase following irradiation.
△ Less
Submitted 7 December, 2001;
originally announced December 2001.
-
Growth of Strongly Biaxially Aligned MgB2 Thin Films on Sapphire by Post-annealing of Amorphous Precursors
Authors:
A. Berenov,
Z. Lockman,
X. Qi,
Y. Bugoslavsky,
L. F. Cohen,
M. -H. Jo,
N. A. Stelmashenko,
V. N. Tsaneva,
M. Kambara,
N. Hari Babu,
D. A. Cardwell,
M. G. Blamire,
J. L. MacManus-Driscoll
Abstract:
MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in the range 30 kA/cm2 to 300 kA/cm2, and irreversibility fields at 20 K of 4 T to 6.2 T. An inverse correlation was found between Tc and irreversibility field. T…
▽ More
MgB2 thin films were cold-grown on sapphire substrates by pulsed laser deposition (PLD), followed by post-annealing in mixed, reducing gas, Mg-rich, Zr gettered, environments. The films had Tcs in the range 29 K to 34 K, Jcs (20K, H=0) in the range 30 kA/cm2 to 300 kA/cm2, and irreversibility fields at 20 K of 4 T to 6.2 T. An inverse correlation was found between Tc and irreversibility field. The films had grain sizes of 0.1-1 micron and a strong biaxial alignment was observed in the 950C annealed film.
△ Less
Submitted 14 June, 2001;
originally announced June 2001.
-
Evidence for high inter-granular current flow in single-phase polycrystalline MgB2 superconductor
Authors:
K. Kawano,
J. S. Abell,
M. Kambara,
N Hari Babu,
D. A. Cardwell
Abstract:
The distribution of magnetic field in single-phase polycrystalline bulk MgB2 has been measured using a Magneto-Optical (MO) technique for an external magnetic field applied perpendicular to the sample surface. The MO studies indicate that an inter-granular current network is readily established in this material and the current is not limited by weak-linked grain boundaries. The grain boundaries…
▽ More
The distribution of magnetic field in single-phase polycrystalline bulk MgB2 has been measured using a Magneto-Optical (MO) technique for an external magnetic field applied perpendicular to the sample surface. The MO studies indicate that an inter-granular current network is readily established in this material and the current is not limited by weak-linked grain boundaries. The grain boundaries are observed to resist preferential magnetic field penetration, with the inter-grain mechanism dominating the current flow in the sample at temperatures up to 30K. The results provide clear evidence that the intra-granular current flow is isotropic. A critical current density of ~10^4 Acm-2 was estimated at 30K in a field of 150mT from the MO measurements. These results provide further evidence of the considerable potential for MgB2 for engineering applications.
△ Less
Submitted 6 April, 2001;
originally announced April 2001.