Showing 1–47 of 47 results for author: Arumugam, S

IQMDose3D: a software tool for reconstructing the dose in patient using patient planning CT images and the signals measured by IQM detector

Authors: Aitang Xing, Gary Goozee, Alison Gray, Vaughan Moutrie, Sankar Arumugam, Shrikant Deshpande, Anthony Espinoza, Vasilis Kondilis, Marjorie McDonald, Philip Vial

Abstract: The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQ… ▽ More The integral quality monitor (IQM) system compares the signal measured with a large volume chamber mounted to the linear accelerator's head to the signal calculated using the patient DICOM RT plan for patient-specific quality assurance (PSQA). A method was developed to reconstruct the dose in patients using the signal measured by IQM chamber and patient planning CT images. A software tool named IQMDose3D was implemented to automate this procedure and integrated into the IQM-based PSQA workflow. IQMDose3D enables the physicists to evaluate PSQA by focusing on the clinical perspective by comparing the delivered plan to the approved clinical plan in terms of the clinical goals, dose-volume histogram (DVH) in addition to the three-dimensional (3D) gamma map and gamma pass rate. △ Less

Submitted 29 March, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: Accepted by ICCR 2024 conference

AutoMRISimQA: an automated system for daily quality control of a 3T MRI simulator

Authors: Aitang Xing, Gary Goozee, Gary Liney, Sankar Arumugam, Shrikant Deshpande, Anthony Espinoza, Alison Gray, Vasilis Kondilis, Doaa Elwadia, Robba Rai, Lois Holloway

Abstract: A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accurac… ▽ More A software system named AutoMRISimQA was developed to monitor the daily performance of a wide-bore 3T scanner(MRI) which was designed and dedicated to radiotherapy simulation. The system can monitor the performance of the MRI simulator not only by using image quality indices such as signal-to-noise ratio (SNR), uniformity, ghosting and contrast but also performing a quick check of geometry accuracy as well as the external lasers quantitatively. It was implemented into the daily clinically workflow in 2013 and has been used for more than 10 years. It was also seamlessly integrated with QAtrack, allowing continuous monitoring of the consistency of the MRI simulator's performance. △ Less

Submitted 29 March, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: Accepted by conference ICCR 2024

Sudoku Number of Corona of Graphs

Authors: Manju S Nair, Aparna Lakshmanan S, S Arumugam

Abstract: Let $G = (V,E)$ be a graph of order $n$ with chromatic number $χ(G) = k$, let $S \subset V$ and let $C_0$ be a $k$-coloring of the induced subgraph $G[S]$. The coloring $C_0$ is called an extendable coloring, if $C_0$ can be extended to a $k$-coloring of $G$ and it is a Sudoku coloring of $G$ if the extension is unique. The smallest order of such an induced subgraph $G[S]$ of $G$ which admits a Su… ▽ More Let $G = (V,E)$ be a graph of order $n$ with chromatic number $χ(G) = k$, let $S \subset V$ and let $C_0$ be a $k$-coloring of the induced subgraph $G[S]$. The coloring $C_0$ is called an extendable coloring, if $C_0$ can be extended to a $k$-coloring of $G$ and it is a Sudoku coloring of $G$ if the extension is unique. The smallest order of such an induced subgraph $G[S]$ of $G$ which admits a Sudoku coloring is called the Sudoku number of $G$ and is denoted by $sn(G)$. In this paper, we first introduce the notion of uniquely color extendable vertex and then we obtain the lower and upper bounds for the Sudoku number of $G \circ K_1$. Some families of graphs which attain these bounds are also obtained. The exact value of the Sudoku number of corona of $C_n$, $W_n$ and $K_n$ with $K_1$ and $C_n \circ P_m$ are also obtained. △ Less

Submitted 13 February, 2024; originally announced February 2024.

MSC Class: 05C15; 05C76

An improved upper bound for the domination number of a graph

Authors: Subramanian Arumugam, Suresh Manjanath Hegde, Shashanka Kulamarva

Abstract: Let $G$ be a graph of order $n$. A classical upper bound for the domination number of a graph $G$ having no isolated vertices is $\lfloor\frac{n}{2}\rfloor$. However, for several families of graphs, we have $γ(G) \le \lfloor\sqrt{n}\rfloor$ which gives a substantially improved upper bound. In this paper, we give a condition necessary for a graph $G$ to have $γ(G) \le \lfloor\sqrt{n}\rfloor$, and s… ▽ More Let $G$ be a graph of order $n$. A classical upper bound for the domination number of a graph $G$ having no isolated vertices is $\lfloor\frac{n}{2}\rfloor$. However, for several families of graphs, we have $γ(G) \le \lfloor\sqrt{n}\rfloor$ which gives a substantially improved upper bound. In this paper, we give a condition necessary for a graph $G$ to have $γ(G) \le \lfloor\sqrt{n}\rfloor$, and some conditions sufficient for a graph $G$ to have $γ(G) \le \lfloor\sqrt{n}\rfloor$. We also present a characterization of all connected graphs $G$ of order $n$ with $γ(G) = \lfloor\sqrt{n}\rfloor$. Further, we prove that for a graph $G$ not satisfying $rad(G)=diam(G)=rad(\overline{G})=diam(\overline{G})=2$, deciding whether $γ(G) \le \lfloor\sqrt{n}\rfloor$ or $γ(\overline{G}) \le \lfloor\sqrt{n}\rfloor$ can be done in polynomial time. We conjecture that this decision problem can be solved in polynomial time for any graph $G$. △ Less

Submitted 16 January, 2024; v1 submitted 5 January, 2024; originally announced January 2024.

MSC Class: 05C69

Low-frequency pulse-jitter measurement with the uGMRT I : PSR J0437$-$4715

Authors: Tomonosuke Kikunaga, Shinnosuke Hisano, Neelam Dhanda Batra, Shantanu Desai, Bhal Chandra Joshi, Manjari Bagchi, T. Prabu, Keitaro Takahashi, Swetha Arumugam, Adarsh Bathula, Subhajit Dandapat, Debabrata Deb, Churchil Dwivedi, Yashwant Gupta, Shebin Jose Jacob, Fazal Kareem, Nobleson K, Pragna Mamidipaka, Avinash Kumar Paladi, Arul Pandian B, Prerna Rana, Jaikhomba Singha, Aman Srivastava, Mayuresh Surnis, Pratik Tarafdar

Abstract: High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of… ▽ More High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of the Indian Pulsar Timing Array experiment. We were able to detect jitter in both the 300 - 500 MHz and 1260 - 1460 MHz observations of the upgraded Giant Metrewave Radio Telescope (uGMRT). The former is the first jitter measurement for this pulsar below 700 MHz, and the latter is in good agreement with results from previous studies. In addition, at 300 - 500 MHz, we investigated the frequency dependence of the jitter by calculating the jitter for each sub-banded arrival time of pulses. We found that the jitter amplitude increases with frequency. This trend is opposite as compared to previous studies, indicating that there is a turnover at intermediate frequencies. It will be possible to investigate this in more detail with uGMRT observations at 550 - 750 MHz and future high sensitive wideband observations from next generation telescopes, such as the Square Kilometre Array. We also explored the effect of jitter on the high precision dispersion measure (DM) measurements derived from short duration observations. We find that even though the DM precision will be better at lower frequencies due to the smaller amplitude of jitter noise, it will limit the DM precision for high signal-to-noise observations, which are of short durations. This limitation can be overcome by integrating for a long enough duration optimised for a given pulsar. △ Less

Submitted 18 April, 2024; v1 submitted 4 December, 2023; originally announced December 2023.

Comments: 13 pages, 12 figures, 3 tables, accepted for Publication of the Astronomical Society of Australia

Using low-frequency scatter-broadening measurements for precision estimates of dispersion measures

Authors: Jaikhomba Singha, Bhal Chandra Joshi, M. A. Krishnakumar, Fazal Kareem, Adarsh Bathula, Churchil Dwivedi, Shebin Jose Jacob, Shantanu Desai, Pratik Tarafdar, P. Arumugam, Swetha Arumugam, Manjari Bagchi, Neelam Dhanda Batra, Subhajit Dandapat, Debabrata Deb, Jyotijwal Debnath, A Gopakumar, Yashwant Gupta, Shinnosuke Hisano, Ryo Kato, Tomonosuke Kikunaga, Piyush Marmat, K. Nobleson, Avinash K. Paladi, Arul Pandian B. , et al. (6 additional authors not shown)

Abstract: A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method… ▽ More A pulsar's pulse profile gets broadened at low frequencies due to dispersion along the line of sight or due to multi-path propagation. The dynamic nature of the interstellar medium makes both of these effects time-dependent and introduces slowly varying time delays in the measured times-of-arrival similar to those introduced by passing gravitational waves. In this article, we present a new method to correct for such delays by obtaining unbiased dispersion measure (DM) measurements by using low-frequency estimates of the scattering parameters. We evaluate this method by comparing the obtained DM estimates with those, where scatter-broadening is ignored using simulated data. A bias is seen in the estimated DMs for simulated data with pulse-broadening with a larger variability for a data set with a variable frequency scaling index, $α$, as compared to that assuming a Kolmogorov turbulence. Application of the proposed method removes this bias robustly for data with band averaged signal-to-noise ratio larger than 100. We report, for the first time, the measurements of the scatter-broadening time and $α$ from analysis of PSR J1643$-$1224, observed with upgraded Giant Metrewave Radio Telescope as part of the Indian Pulsar Timing Array experiment. These scattering parameters were found to vary with epoch and $α$ was different from that expected for Kolmogorov turbulence. Finally, we present the DM time-series after application of the new technique to PSR J1643$-$1224. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Comments: 9 pages, 8 figures, Submitted to MNRAS

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

Authors: The International Pulsar Timing Array Collaboration, G. Agazie, J. Antoniadis, A. Anumarlapudi, A. M. Archibald, P. Arumugam, S. Arumugam, Z. Arzoumanian, J. Askew, S. Babak, M. Bagchi, M. Bailes, A. -S. Bak Nielsen, P. T. Baker, C. G. Bassa, A. Bathula, B. Bécsy, A. Berthereau, N. D. R. Bhat, L. Blecha, M. Bonetti, E. Bortolas, A. Brazier, P. R. Brook, M. Burgay , et al. (220 additional authors not shown)

Abstract: The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA… ▽ More The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA. △ Less

Submitted 1 September, 2023; originally announced September 2023.

Comments: 21 pages, 9 figures, submitted to ApJ

Emergent Spatiotemporal Organization in Stochastic Intracellular Transport Dynamics

Authors: Kunaal Joshi, Harrison York, Charles S. Wright, Rudro R. Biswas, Senthil Arumugam, Srividya Iyer-Biswas

Abstract: The interior of a living cell is an active, fluctuating, and crowded environment. Yet, it maintains a high level of coherent organization, which is readily apparent in the intracellular transport network. Membrane-bound compartments called endosomes play a key role in carrying cargo, in conjunction with myriad components including cargo adaptor proteins, membrane sculptors, motor proteins, and the… ▽ More The interior of a living cell is an active, fluctuating, and crowded environment. Yet, it maintains a high level of coherent organization, which is readily apparent in the intracellular transport network. Membrane-bound compartments called endosomes play a key role in carrying cargo, in conjunction with myriad components including cargo adaptor proteins, membrane sculptors, motor proteins, and the cytoskeleton. These components coordinate to effectively navigate the crowded cell interior and transport cargo to specific intracellular locations, even though the underlying protein interactions and enzymatic reactions exhibit stochastic behavior. A major challenge is to measure, analyze, and understand how, despite the inherent stochasticity of the constituent processes, the collective outcomes show an emergent spatiotemporal order that is precise and robust. This review focuses on this intriguing dichotomy, providing insights into the known mechanisms of noise suppression and noise utilization in intracellular transport processes, and also identifies opportunities for future inquiry. △ Less

Submitted 2 July, 2023; originally announced July 2023.

Comments: Review article

The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, P. Auclair, S. Babak, M. Bagchi, A. -S. Bak Nielsen, E. Barausse, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, C. Caprini, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, M. Crisostomi, S. Dandapat, D. Deb , et al. (89 additional authors not shown)

Abstract: The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling sup… ▽ More The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy. △ Less

Submitted 15 May, 2024; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 30 pages, 23 figures, replaced to match the version published in Astronomy & Astrophysics, note the change in the numbering order in the series (now paper IV)

The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (75 additional authors not shown)

Abstract: We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results o… ▽ More We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature. △ Less

Submitted 25 June, 2024; v1 submitted 28 June, 2023; originally announced June 2023.

Comments: 13 figures, 15 pages, accepted

The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (73 additional authors not shown)

Abstract: The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the su… ▽ More The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 20 pages, 6 figures, 9 tables

Journal ref: A&A 678, A49 (2023)

The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals

Authors: J. Antoniadis, P. Arumugam, S. Arumugam, S. Babak, M. Bagchi, A. -S. Bak Nielsen, C. G. Bassa, A. Bathula, A. Berthereau, M. Bonetti, E. Bortolas, P. R. Brook, M. Burgay, R. N. Caballero, A. Chalumeau, D. J. Champion, S. Chanlaridis, S. Chen, I. Cognard, S. Dandapat, D. Deb, S. Desai, G. Desvignes, N. Dhanda-Batra, C. Dwivedi , et al. (73 additional authors not shown)

Abstract: We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on… ▽ More We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3σ$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years. △ Less

Submitted 28 June, 2023; originally announced June 2023.

Comments: 21 pages, 14 figures, 4 appendix figures, accepted for publication in A&A

Journal ref: A&A 678, A50 (2023)

Multi-band Extension of the Wideband Timing Technique

Authors: Avinash Kumar Paladi, Churchil Dwivedi, Prerna Rana, Nobleson K, Abhimanyu Susobhanan, Bhal Chandra Joshi, Pratik Tarafdar, Debabrata Deb, Swetha Arumugam, A Gopakumar, M A Krishnakumar, Neelam Dhanda Batra, Jyotijwal Debnath, Fazal Kareem, Paramasivan Arumugam, Manjari Bagchi, Adarsh Bathula, Subhajit Dandapat, Shantanu Desai, Yashwant Gupta, Shinnosuke Hisano, Divyansh Kharbanda, Tomonosuke Kikunaga, Neel Kolhe, Yogesh Maan , et al. (5 additional authors not shown)

Abstract: The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency sp… ▽ More The wideband timing technique enables the high-precision simultaneous estimation of pulsar Times of Arrival (ToAs) and Dispersion Measures (DMs) while effectively modeling frequency-dependent profile evolution. We present two novel independent methods that extend the standard wideband technique to handle simultaneous multi-band pulsar data incorporating profile evolution over a larger frequency span to estimate DMs and ToAs with enhanced precision. We implement the wideband likelihood using the libstempo python interface to perform wideband timing in the tempo2 framework. We present the application of these techniques to the dataset of fourteen millisecond pulsars observed simultaneously in Band 3 (300 - 500 MHz) and Band 5 (1260 - 1460 MHz) of the upgraded Giant Metrewave Radio Telescope (uGMRT) with a large band gap of 760 MHz as a part of the Indian Pulsar Timing Array (InPTA) campaign. We achieve increased ToA and DM precision and sub-microsecond root mean square post-fit timing residuals by combining simultaneous multi-band pulsar observations done in non-contiguous bands for the first time using our novel techniques. △ Less

Submitted 8 November, 2023; v1 submitted 25 April, 2023; originally announced April 2023.

Comments: Published in MNRAS

Noise analysis of the Indian Pulsar Timing Array data release I

Authors: Aman Srivastava, Shantanu Desai, Neel Kolhe, Mayuresh Surnis, Bhal Chandra Joshi, Abhimanyu Susobhanan, Aurélien Chalumeau, Shinnosuke Hisano, Nobleson K., Swetha Arumugam, Divyansh Kharbanda, Jaikhomba Singha, Pratik Tarafdar, P Arumugam, Manjari Bagchi, Adarsh Bathula, Subhajit Dandapat, Lankeswar Dey, Churchil Dwivedi, Raghav Girgaonkar, A. Gopakumar, Yashwant Gupta, Tomonosuke Kikunaga, M. A. Krishnakumar, Kuo Liu , et al. (6 additional authors not shown)

Abstract: The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering vari… ▽ More The Indian Pulsar Timing Array (InPTA) collaboration has recently made its first official data release (DR1) for a sample of 14 pulsars using 3.5 years of uGMRT observations. We present the results of single-pulsar noise analysis for each of these 14 pulsars using the InPTA DR1. For this purpose, we consider white noise, achromatic red noise, dispersion measure (DM) variations, and scattering variations in our analysis. We apply Bayesian model selection to obtain the preferred noise models among these for each pulsar. For PSR J1600$-$3053, we find no evidence of DM and scattering variations, while for PSR J1909$-$3744, we find no significant scattering variations. Properties vary dramatically among pulsars. For example, we find a strong chromatic noise with chromatic index $\sim$ 2.9 for PSR J1939+2134, indicating the possibility of a scattering index that doesn't agree with that expected for a Kolmogorov scattering medium consistent with similar results for millisecond pulsars in past studies. Despite the relatively short time baseline, the noise models broadly agree with the other PTAs and provide, at the same time, well-constrained DM and scattering variations. △ Less

Submitted 16 June, 2023; v1 submitted 21 March, 2023; originally announced March 2023.

Comments: Accepted for publication in PRD, 30 pages, 17 figures, 4 tables

Waveguiding driven by the Pancharatnam-Berry phase

Authors: C. P. Jisha, S. V. Arumugam, L. Marrucci, S. Nolte, A. Alberucci

Abstract: We theoretically and numerically investigate the properties of waveguides based on the Pancharatnam-Berry phase, obtained by a longitudinally periodic rotation of the optic axis in a transversely-twisted birefringent medium. In this paper we study the case where the period of the longitudinal modulation is chosen so that a net accumulation of geometric phase in propagation occurs. First, the inter… ▽ More We theoretically and numerically investigate the properties of waveguides based on the Pancharatnam-Berry phase, obtained by a longitudinally periodic rotation of the optic axis in a transversely-twisted birefringent medium. In this paper we study the case where the period of the longitudinal modulation is chosen so that a net accumulation of geometric phase in propagation occurs. First, the interplay between different contributions to the optical potential is addressed. Second, a continuous evolution of the polarization structure of the quasi-modes is observed in the numerical simulations. We explain it by a combination of plane-wave-based models and gauge transformations. We discover that, beyond the longitudinal oscillations, the polarization of the quasi-mode also varies through its cross-section. The analogies with respect to charged particles moving in a magnetic field are outlined. △ Less

Submitted 5 September, 2022; originally announced September 2022.

Comments: 16 pages, 11 figures

Self-Sustained Non-Equilibrium Co-existence of Fluid and Solid States in a Strongly Coupled Complex Plasma System

Authors: M. G Hariprasad, P. Bandyopadhyay, V. S. Nikolaev, D. A. Kolotinskii, S. Arumugam, G. Arora, S. Singh, A. Sen, A. V. Timofeev

Abstract: A complex (dusty) plasma system is well known as a paradigmatic model for studying the kinetics of solid-liquid phase transitions in inactive condensed matter. At the same time, under certain conditions a complex plasma system can also display characteristics of an active medium with the micron-sized particles converting energy of the ambient environment into motility and thereby becoming active.… ▽ More A complex (dusty) plasma system is well known as a paradigmatic model for studying the kinetics of solid-liquid phase transitions in inactive condensed matter. At the same time, under certain conditions a complex plasma system can also display characteristics of an active medium with the micron-sized particles converting energy of the ambient environment into motility and thereby becoming active. We present a detailed analysis of the experimental complex plasmas system that shows evidence of a non-equilibrium stationary coexistence between a cold crystalline and a hot fluid state in the structure due to the conversion of plasma energy into the motion energy of microparticles in the central region of the system. The plasma mediated non-reciprocal interaction between the dust particles is the underlying mechanism for the enormous heating of the central subsystem, and it acts as a micro-scale energy source that keeps the central subsystem in the molten state. Accurate multiscale simulations of the system based on combined molecular dynamics and particle-in-cell approaches show that strong structural nonuniformity of the system under the action of electostatic trap makes development of instabilities a local process. We present both experimental tests conducted with a complex plasmas system in a DC glow discharge plasma and a detailed theoretical analysis. △ Less

Submitted 13 August, 2022; originally announced August 2022.

Comments: This paper contains 14 pages with eight figures

Sudoku Number of Graphs

Authors: Gee-Choon Lau, J. Maria Jeyaseeli, Wai-Chee Shiu, S. Arumugam

Abstract: We introduce a new concept in graph coloring motivated by the popular Sudoku puzzle. Let $G=(V,E)$ be a graph of order $n$ with chromatic number $χ(G)=k$ and let $S\subseteq V.$ Let $\mathscr C_0$ be a $k$-coloring of the induced subgraph $G[S].$ The coloring $\mathscr C_0$ is called an extendable coloring if $\mathscr C_0$ can be extended to a $k$-coloring of $G.$ We say that $\mathscr C_0$ is a… ▽ More We introduce a new concept in graph coloring motivated by the popular Sudoku puzzle. Let $G=(V,E)$ be a graph of order $n$ with chromatic number $χ(G)=k$ and let $S\subseteq V.$ Let $\mathscr C_0$ be a $k$-coloring of the induced subgraph $G[S].$ The coloring $\mathscr C_0$ is called an extendable coloring if $\mathscr C_0$ can be extended to a $k$-coloring of $G.$ We say that $\mathscr C_0$ is a Sudoku coloring of $G$ if $\mathscr C_0$ can be uniquely extended to a $k$-coloring of $G.$ The smallest order of such an induced subgraph $G[S]$ of $G$ which admits a Sudoku coloring is called the Sudoku number of $G$ and is denoted by $sn(G).$ In this paper we initiate a study of this parameter. We first show that this parameter is related to list coloring of graphs. In Section 2, basic properties of Sudoku coloring that are related to color dominating vertices, chromatic numbers and degree of vertices, are given. Particularly, we obtained necessary conditions for $\mathscr C_0$ being uniquely extendable, and for $\mathscr C_0$ being a Sudoku coloring. In Section 3, we determined the Sudoku number of various familes of graphs. Particularly, we showed that a connected graph $G$ has $sn(G)=1$ if and only if $G$ is bipartite. Consequently, every tree $T$ has $sn(T)=1$. Moreover, a graph $G$ with small chromatic number may have arbitrarily large Sudoku number. Extendable coloring and Sudoku coloring are nice tools for providing a $k$-coloring of $G$. △ Less

Submitted 16 June, 2022; originally announced June 2022.

MSC Class: 05C78; 05C69

Classification of Pulsar Glitch Amplitudes using Extreme Deconvolution

Authors: Swetha Arumugam, Shantanu Desai

Abstract: We carry out a classification of the glitch amplitudes of radio pulsars using Extreme Deconvolution technique based on the Gaussian Mixture Model, where the observed uncertainties in the glitch amplitudes $Δν/ν$ are taken into account. Our dataset consists of 699 glitches from 238 pulsars. We then use information theory criteria such as AIC and BIC to determine the optimum number of glitch classes… ▽ More We carry out a classification of the glitch amplitudes of radio pulsars using Extreme Deconvolution technique based on the Gaussian Mixture Model, where the observed uncertainties in the glitch amplitudes $Δν/ν$ are taken into account. Our dataset consists of 699 glitches from 238 pulsars. We then use information theory criteria such as AIC and BIC to determine the optimum number of glitch classes. We find that both AIC and BIC show that the pulsar glitch amplitudes can be optimally described using a bimodal distribution. The mean values of $Δν/ν$ for the two components are equal to $4.79 \times 10^{-9}$ and $1.28 \times 10^{-6}$, respectively with standard deviation given by 1.01 and 0.55 dex. We also applied this method to classify the pulsar inter-glitch time intervals, and we find that AIC prefers two components, whereas BIC prefers a single component. The unified data set and analyses codes used in this work have been made publicly available. △ Less

Submitted 14 December, 2022; v1 submitted 6 June, 2022; originally announced June 2022.

Comments: 8 pages, 5 figures. Accepted for publication in JHEAP

The Cell Physiome: What do we need in a computational physiology framework for predicting single cell biology?

Authors: Vijay Rajagopal, Senthil Arumugam, Peter Hunter, Afshin Khadangi, Joshua Chung, Michael Pan

Abstract: Modern biology and biomedicine are undergoing a big-data explosion needing advanced computational algorithms to extract mechanistic insights on the physiological state of living cells. We present the motivation for the Cell Physiome: a framework and approach for creating, sharing, and using biophysics-based computational models of single cell physiology. Using examples in calcium signaling, bioene… ▽ More Modern biology and biomedicine are undergoing a big-data explosion needing advanced computational algorithms to extract mechanistic insights on the physiological state of living cells. We present the motivation for the Cell Physiome: a framework and approach for creating, sharing, and using biophysics-based computational models of single cell physiology. Using examples in calcium signaling, bioenergetics, and endosomal trafficking, we highlight the need for spatially detailed, biophysics-based computational models to uncover new mechanisms underlying cell biology. We review progress and challenges to date towards creating cell physiome models. We then introduce bond graphs as an efficient way to create cell physiome models that integrate chemical, mechanical, electromagnetic, and thermal processes while maintaining mass and energy balance. Bond graphs enhance modularization and re-usability of computational models of cells at scale. We conclude with a look forward into steps that will help fully realize this exciting new field of mechanistic biomedical data science. △ Less

Submitted 5 March, 2022; v1 submitted 26 February, 2022; originally announced February 2022.

Comments: Minor text edits to fix minor grammatical errors and figure reference

Pressure-enhanced superconductivity in cage-type quasiskutterudite Sc5Rh6Sn18 single crystal

Authors: Govindaraj Lingannan, Boby Joseph, Muthukumaran Sundaramoorthy, Chia Nung Kuo, Chin Shan Lue, Sonachalam Arumugam

Abstract: Sc5Rh6Sn18 with a cage-type quasiskutterudite crystal lattice and type II superconductivity, with superconducting transition temperature Tc = 4.99 K, was investigated under hydrostatic high-pressure (HP) using electrical transport, synchrotron X-ray diffraction (XRD) and Raman spectroscopy. Our data show that HP enhance the metallic nature and Tc of the system. Tc is found to show a continuous inc… ▽ More Sc5Rh6Sn18 with a cage-type quasiskutterudite crystal lattice and type II superconductivity, with superconducting transition temperature Tc = 4.99 K, was investigated under hydrostatic high-pressure (HP) using electrical transport, synchrotron X-ray diffraction (XRD) and Raman spectroscopy. Our data show that HP enhance the metallic nature and Tc of the system. Tc is found to show a continuous increase reaching to 5.24 K at 2.5 GPa. Athough the system is metallic in nature, Raman spectroscopy investigations at ambient pressure revealed the presence of three weak modes at 165.97, 219.86 and 230.35 cm-1, mostly related to the rattling atom Sc. The HP-XRD data revealed that the cage structure was stable without any structural phase transition up to ~7 GPa. The lattice parameters and volume exhibited a smooth decrease without any anomalies as a function of pressure in this pressure range. In particular, a second order Birch-Murnaghan equation of state can describe the pressure dependence of the unit cell volume well, yielding a bulk modulus of ~ 97 GPa. HP Raman investigations revealed a linear shift of all the three Raman modes to higher wavenumbers with increasing pressure up to ~8 GPa. As the pressure enhances the bond overlap, thus inducing more electronic charges into the system, HP-XRD and Raman results may indciate the possibility of obtaining higher Tc with increasing pressures in this pressure range. △ Less

Submitted 29 March, 2022; v1 submitted 12 February, 2022; originally announced February 2022.

Journal ref: Journal of Physics: Condensed Matter (2022)

Tailoring Mie Resonances in Cupric Oxide Particles for Use as Nanoantennas

Authors: Sundaram Bhardwaj Ramakrishnan, Ravi Teja Addanki Tirumala, Farshid Mohammadparast, Swetha M. Arumugam, Marimuthu Andiappan

Abstract: The field of nano-optics has grown with plasmonic metals. Metals such as silver, gold, and copper nanoparticles, can concentrate electromagnetic (EM) fields at the nanoscale, due to the special property called localized surface plasmon resonance (LSPR). This laid the foundation for a wide range of applications, including nanoscale optics, solar energy harvesting, photocatalysis, and biosensing. Ho… ▽ More The field of nano-optics has grown with plasmonic metals. Metals such as silver, gold, and copper nanoparticles, can concentrate electromagnetic (EM) fields at the nanoscale, due to the special property called localized surface plasmon resonance (LSPR). This laid the foundation for a wide range of applications, including nanoscale optics, solar energy harvesting, photocatalysis, and biosensing. However, there are inherent problems associated with plasmonic metals, such as high heating losses, and their inability to be scaled-up like semiconductor fabrication processes. In addition, the field enhancement is restricted only to electric fields. All together these inhibit the broader use of PMNs in practical applications. In this work, we report submicron cupric oxide (CuO) particles with a medium refractive index that can exhibit strong electric and magnetic Mie resonances with strong extinction/scattering cross-sections comparable to or slightly exceeding those of their plasmonic counterparts. Through the development of particle synthesis techniques with strong shape and size control, optical spectroscopy, and finite-difference-time-domain simulations we show that the Mie resonance peak wavelengths are size- and shape-dependent. This gives tunability in the visible to near-infrared regions for harvesting a wider fraction of the solar spectrum. Therefore, submicron CuO particles exhibit strong potential in emerging as high-performance alternatives to PMNs. The strong electric and magnetic Mie-resonance-mediated nanoantenna effect attribute that CuO particles can be potentially used in a plethora of applications, including surface-enhance Raman spectroscopy, metamaterials, photocatalysis, and photovoltaics. △ Less

Submitted 17 January, 2022; originally announced January 2022.

Comments: Combined Main draft & SI - 25 pages

On local antimagic chromatic number of cycle-related join graphs II

Authors: Gee-Choon Lau, K. Premalatha, S. Arumugam, Wai-Chee Shiu

Abstract: An edge labeling of a graph $G = (V, E)$ is said to be local antimagic if it is a bijection $f:E \to\{1,\ldots ,|E|\}$ such that for any pair of adjacent vertices $x$ and $y$, $f^+(x)\not= f^+(y)$, where the induced vertex label of $x$ is $f^+(x)= \sum_{e\in E(x)} f(e)$ ($E(x)$ is the set of edges incident to $x$). The local antimagic chromatic number of $G$, denoted by $χ_{la}(G)$, is the minimum… ▽ More An edge labeling of a graph $G = (V, E)$ is said to be local antimagic if it is a bijection $f:E \to\{1,\ldots ,|E|\}$ such that for any pair of adjacent vertices $x$ and $y$, $f^+(x)\not= f^+(y)$, where the induced vertex label of $x$ is $f^+(x)= \sum_{e\in E(x)} f(e)$ ($E(x)$ is the set of edges incident to $x$). The local antimagic chromatic number of $G$, denoted by $χ_{la}(G)$, is the minimum number of distinct induced vertex labels over all local antimagic labelings of $G$. In this paper, several sufficient conditions to determine the local antimagic chromatic number of the join of graphs are obtained. We then determine the exact value of the local antimagic chromatic number of many join graphs. △ Less

Submitted 8 December, 2021; originally announced December 2021.

Comments: 14 pages, submitted for journal publication

MSC Class: 05C78; 05C69

Structure-Property-Performance Relationships of Dielectric Nanostructures for Mie Resonance-Enhanced Dye-Sensitization

Authors: Ravi Teja Addanki Tirumala, Sundaram Bhardwaj Ramakrishnan, Farshid Mohammadparast, Swetha M. Arumugam, Susheng Tan, Marimuthu Andiappan

Abstract: Dye-sensitized photocatalytic (DSP) approach is considered as one of the promising approaches for developing visible light- and near-infrared light-responsive photocatalysts. DSP systems are still affected by significant drawbacks, such as low light absorption efficiency. Recently, it has been demonstrated that the plasmonic metal nanostructures can be used to enhance the light absorption efficien… ▽ More Dye-sensitized photocatalytic (DSP) approach is considered as one of the promising approaches for developing visible light- and near-infrared light-responsive photocatalysts. DSP systems are still affected by significant drawbacks, such as low light absorption efficiency. Recently, it has been demonstrated that the plasmonic metal nanostructures can be used to enhance the light absorption efficiency and the overall dye-sensitization rate of DSP systems through the plasmonic Mie resonance-enhanced dye-sensitization approach. In this contribution, we report an alternate and novel approach, dielectric Mie resonance-enhanced dye sensitization. Specifically, we demonstrate that the dielectric Mie resonances in cuprous oxide (Cu2O) spherical and cubical nanostructures can be used to enhance the dye-sensitization rate of methylene blue dye. The Cu2O nanostructures exhibiting dielectric Mie resonances exhibit up to an order of magnitude higher dye-sensitization rate as compared to Cu2O nanostructures not exhibiting dielectric Mie resonances. Our model system developed from finite-difference time-domain simulation predicts a volcano-type relationship between the dye sensitization rate and the size of Cu2O nanostructures. The predicted structure-property-performance relationship is experimentally verified and the optimal size ranges of Cu2O nanospheres and nanocubes are identified. Although we demonstrate the dielectric Mie resonance-enhanced dye-sensitization approach using Cu2O nanostructures, the proposed approach can be used to design a wide range of DSP systems, including CeO2, α-Fe2O3, and TiO2 nanostructures-based DSP systems. △ Less

Submitted 17 January, 2022; v1 submitted 27 September, 2021; originally announced September 2021.

Comments: Combined Main Draft & SI. Total of 53 pages

DPEx-II: A New Dusty Plasma Device Capable of Producing Large Sized DC Coulomb Crystals

Authors: Saravanan Arumugam, Pintu Bandyopadhyay, Swarnima Singh, M. G. Hariprasad, Dinesh Rathod, Garima Arora, Abhijit Sen

Abstract: The creation of a spatially extended stable DC complex plasma crystal is a big experimental challenge and a topical area of research in the field of dusty plasmas. In this paper we describe a newly built and commissioned dusty plasma experimental device, DPEx-II, at the Institute for Plasma Research. The device can support the formation of large sized Coulomb crystals in a DC glow discharge plasma… ▽ More The creation of a spatially extended stable DC complex plasma crystal is a big experimental challenge and a topical area of research in the field of dusty plasmas. In this paper we describe a newly built and commissioned dusty plasma experimental device, DPEx-II, at the Institute for Plasma Research. The device can support the formation of large sized Coulomb crystals in a DC glow discharge plasma. The plasma in this L-shaped table-top glass chamber is produced between a circular anode and a long tray shaped cathode. It is characterized with the help of various electrostatic probes over a range of discharge conditions. The dust particles are introduced by a dust dispenser to form a strongly coupled Coulomb crystal in the cathode sheath region. The unique asymmetric electrode configuration minimizes the heating of dust particles and facilitates the formation of crystalline structures with a maximum achievable dimension of 40~cm X 15~cm using this device. A larger crystal has numerous advantages over smaller ones, such as higher structural homogeneity, fewer defects, lower statistical errors due to finite size effects etc.. A host of diagnostics tools are provided to characterize the Coulomb crystal. Results of a few initial experiments aimed at demonstrating the technical capabilities of the device and its potential for future dusty plasma research, are reported. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Comments: This paper contains 13 pages with 23 figures

Journal ref: Plasma Source Science and Technology, 2021

Wohlleben Effect and Emergent Pi junctions in superconducting Boron doped Diamond thin films

Authors: L. Govindaraj, S. Arumugam, R. Thiyagarajan, Dinesh Kumar, M. Kannan, Dhrubha Das, T. S. Suraj, V. Sankaranarayanan, K. Sethupathi, G. Baskaran, Raman Sankar, M. S. Ramachandra Rao

Abstract: Diamond is an excellent band insulator. However, boron (B) doping is known to induce superconductivity. We present two interesting effects in superconducting B doped diamond (BDD) thin films: i) Wohlleben effect (paramagnetic Meissner effect, PME) and ii) a low field spin glass like susceptibility anomaly. We have performed electrical and magnetic measurements (under pressure in one sample) at dop… ▽ More Diamond is an excellent band insulator. However, boron (B) doping is known to induce superconductivity. We present two interesting effects in superconducting B doped diamond (BDD) thin films: i) Wohlleben effect (paramagnetic Meissner effect, PME) and ii) a low field spin glass like susceptibility anomaly. We have performed electrical and magnetic measurements (under pressure in one sample) at dopings (1.4 , 2.6 and 3.6) X 1021 cm-3, in a temperature range 2 - 10 K. PME, a low field anomaly in inhomogeneous superconductors could arise from flux trapping, flux compression, or for non-trivial reason such as emergent Josephson Pi junctions. Joint occurrence of PME and spin glass type anomalies points to possible emergence of Pi junctions. BDD is a disordered s-wave superconductor; and Pi junctions could be produced by spin flip scattering of spin half moments when present at weak superconducting regions (Bulaevski et al. 1978). A frustrated network of 0 and Pi junctions will result (Kusmartsev et al. 1992) in a distribution of spontaneous equilibrium supercurrents, a phase glass state. Anderson localized spin half spinons embedded in a metallic fluid (two fluid model of Bhatt et al.) could create Pi junction by spin flip scattering. Our findings are consistent with presence of Pi junctions, invoked to explain their (Bhattacharyya et al.) observation of certain resistance anomaly in BDD. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Comments: 21 Pages, 7 Figures

Algorithmic Complexity of Secure Connected Domination in Graphs

Authors: Jakkepalli Pavan Kumar, P. Venkata Subba Reddy, S. Arumugam

Abstract: Let $G = (V,E)$ be a simple, undirected and connected graph. A connected (total) dominating set $S \subseteq V$ is a secure connected (total) dominating set of $G$, if for each $ u \in V \setminus S$, there exists $v \in S$ such that $uv \in E$ and $(S \setminus \lbrace v \rbrace) \cup \lbrace u \rbrace $ is a connected (total) dominating set of $G$. The minimum cardinality of a secure connected (… ▽ More Let $G = (V,E)$ be a simple, undirected and connected graph. A connected (total) dominating set $S \subseteq V$ is a secure connected (total) dominating set of $G$, if for each $ u \in V \setminus S$, there exists $v \in S$ such that $uv \in E$ and $(S \setminus \lbrace v \rbrace) \cup \lbrace u \rbrace $ is a connected (total) dominating set of $G$. The minimum cardinality of a secure connected (total) dominating set of $G$ denoted by $ γ_{sc} (G) (γ_{st}(G))$, is called the secure connected (total) domination number of $G$. In this paper, we show that the decision problems corresponding to secure connected domination number and secure total domination number are NP-complete even when restricted to split graphs or bipartite graphs. The NP-complete reductions also show that these problems are w[2]-hard. We also prove that the secure connected domination problem is linear time solvable in block graphs and threshold graphs. △ Less

Submitted 3 February, 2020; originally announced February 2020.

MSC Class: 05C69; 68Q25

Tapered ultra-high Numerical Aperture optical fiber tip for Nitrogen Vacancy ensembles based endoscope in a fluidic environment

Authors: Dewen Duan, Vinaya Kumar Kavatamane, Sri Ranjini Arumugam, Yan-Kai Tzeng, Huan-Cheng Chang, Gopalakrishnan Balasubramanian

Abstract: Fixing a diamond containing a high density of Nitrogen-Vacancy (NV) center ensembles on the apex of a multimode optical fiber (MMF) extends the applications of NV-based endoscope sensors. Replacing the normal MMF with a tapered MMF (MMF-taper) has enhanced the fluorescence (FL) collection efficiency from the diamond and achieved a high spatial resolution NV-based endoscope. The MMF-taper's high FL… ▽ More Fixing a diamond containing a high density of Nitrogen-Vacancy (NV) center ensembles on the apex of a multimode optical fiber (MMF) extends the applications of NV-based endoscope sensors. Replacing the normal MMF with a tapered MMF (MMF-taper) has enhanced the fluorescence (FL) collection efficiency from the diamond and achieved a high spatial resolution NV-based endoscope. The MMF-taper's high FL collection efficiency is the direct result of multiple internal reflections in the tapered region caused by silica, which has a higher refractive index (RI) than the surrounding air. However, for applications involving fluidic environments whose RI is close to or higher than that of the silica, the MMF-taper loses its FL collection significantly. Here, to overcome this challenge, we replaced the MMF-taper with an ultra-high numerical aperture (NA) microstructured optical fiber (MOF) which is tapered and sealed its air capillaries at the tapered end. Since the end-sealed air capillaries along the tapered MOF (MOF-taper) have isolated the MOF core from the surrounding medium, the core retains its high FL collection and NV excitation efficiency in liquids regardless of their RI values. Such a versatile NV-based endoscope could potentially find broad applications in fluidic environments where many biological processes and chemical reactions occur. △ Less

Submitted 24 December, 2019; originally announced December 2019.

Comments: 4 pages, 5 figures

Journal ref: Appl. Phys. Lett. 116, 113701 (2020)

Effect of hydrostatic pressure on ferromagnetism in two-dimensional CrI$_3$

Authors: Suchanda Mondal, Murugesan Kannan, Moumita Das, Linganan Govindaraj, Ratnadwip Singha, Biswarup Satpati, Sonachalam Arumugam, Prabhat Mandal

Abstract: We have investigated the magnetic properties of highly anisotropic layered ferromagnetic semiconductor CrI$_3$ in presence of hydrostatic pressure ($P$). At ambient pressure, magnetization exhibits a clear anomaly below 212 K along with a thermal hysteresis over a wide temperature range (212-180 K), where a first-order structural transition is observed. CrI$_3$ undergoes a second-order ferromagnet… ▽ More We have investigated the magnetic properties of highly anisotropic layered ferromagnetic semiconductor CrI$_3$ in presence of hydrostatic pressure ($P$). At ambient pressure, magnetization exhibits a clear anomaly below 212 K along with a thermal hysteresis over a wide temperature range (212-180 K), where a first-order structural transition is observed. CrI$_3$ undergoes a second-order ferromagnetic-paramagnetic phase transition with Curie temperature $T_C$=60.4 K. With application of pressure, the transition becomes sharper and $T_C$ is found to increase from 60.4 to 64.9 K as $P$ increases from 0 to 1.0 GPa. $T_C$ increases with $P$ in a sublinear fashion. The thermal hysteresis in magnetization and the increase of $T_C$ with pressure suggest that the spin and lattice degrees of freedom are coupled. The observed increase in $T_C$ has been explained on the basis of change in inter-layer coupling and Cr-I-Cr bond angle with pressure. △ Less

Submitted 10 June, 2019; v1 submitted 3 January, 2019; originally announced January 2019.

Journal ref: Phys. Rev. B 99, 180407 (2019)

Efficient nitrogen-vacancy centers' fluorescence excitation and collection from micrometer-sized diamond by a tapered optical fiber

Authors: Dewen Duan, Guanxiang Du, Vinaya Kumar Kavatamane, Sri Ranjini Arumugam, Yan-Kai Tzeng, Huan-Cheng Chang, Gopalakrishnan Balasubramanian

Abstract: Efficiently excite nitrogen-vacancy (NV) centers in diamond and collect their fluorescence significantly benefit the fiber-optic-based NV sensors. Here, using a tapered optical fiber (TOF) tip, we significantly improve the efficiency of the laser excitation and fluorescence collection of the NV, thus enhance the sensitivity of the fiber-optic based micron-sized diamond magnetic sensor. Numerical c… ▽ More Efficiently excite nitrogen-vacancy (NV) centers in diamond and collect their fluorescence significantly benefit the fiber-optic-based NV sensors. Here, using a tapered optical fiber (TOF) tip, we significantly improve the efficiency of the laser excitation and fluorescence collection of the NV, thus enhance the sensitivity of the fiber-optic based micron-sized diamond magnetic sensor. Numerical calculation shows that the TOF tip delivers a high numerical aperture (NA) and has a high fluorescence excitation and collection efficiency. Experiments demonstrate that using such TOF tip can obtain up to over 7-fold the fluorescence excitation efficiency and over15-fold the fluorescence collection efficiency of a flat-ended (non-TOF) fiber. Such fluorescence collection enhances the sensitivity of the optical fiber-based diamond NV magnetometer, thus extending its potential application region. △ Less

Submitted 9 October, 2018; v1 submitted 8 October, 2018; originally announced October 2018.

Comments: 11 pages, 13 figures

Embedding Covert Information in Broadcast Communications

Authors: Keerthi Suria Kumar Arumugam, Matthieu R. Bloch

Abstract: We analyze a two-receiver binary-input discrete memoryless broadcast channel, in which the transmitter communicates a common message simultaneously to both receivers and a covert message to only one of them. The unintended recipient of the covert message is treated as an adversary who attempts to detect the covert transmission. This model captures the problem of embedding covert messages in an inn… ▽ More We analyze a two-receiver binary-input discrete memoryless broadcast channel, in which the transmitter communicates a common message simultaneously to both receivers and a covert message to only one of them. The unintended recipient of the covert message is treated as an adversary who attempts to detect the covert transmission. This model captures the problem of embedding covert messages in an innocent codebook and generalizes previous covert communication models in which the innocent behavior corresponds to the absence of communication between legitimate users. We identify the exact asymptotic behavior of the number of covert bits that can be transmitted when the rate of the innocent codebook is close to the capacity of the channel to the adversary. Our results also identify the dependence of the number of covert bits on the channel parameters and the characteristics of the innocent codebook. △ Less

Submitted 28 August, 2018; originally announced August 2018.

On Local Antimagic Vertex Coloring for Corona Products of Graphs

Authors: S. Arumugam, Yi-Chun Lee, K. Premalatha, Tao-Ming Wang

Abstract: Let $G = (V, E)$ be a finite simple undirected graph without $K_2$ components. A bijection $f : E \rightarrow \{1, 2,\cdots, |E|\}$ is called a {\bf local antimagic labeling} if for any two adjacent vertices $u$ and $v$, they have different vertex sums, i.e. $w(u) \neq w(v)$, where the vertex sum $w(u) = \sum_{e \in E(u)} f(e)$, and $E(u)$ is the set of edges incident to $u$. Thus any local antima… ▽ More Let $G = (V, E)$ be a finite simple undirected graph without $K_2$ components. A bijection $f : E \rightarrow \{1, 2,\cdots, |E|\}$ is called a {\bf local antimagic labeling} if for any two adjacent vertices $u$ and $v$, they have different vertex sums, i.e. $w(u) \neq w(v)$, where the vertex sum $w(u) = \sum_{e \in E(u)} f(e)$, and $E(u)$ is the set of edges incident to $u$. Thus any local antimagic labeling induces a proper vertex coloring of $G$ where the vertex $v$ is assigned the color(vertex sum) $w(v)$. The {\bf local antimagic chromatic number} $χ_{la}(G)$ is the minimum number of colors taken over all colorings induced by local antimagic labelings of $G$. In this article among others we determine completely the local antimagic chromatic number $χ_{la}(G\circ \overline{K_m})$ for the corona product of a graph $G$ with the null graph $\overline{K_m}$ on $m\geq 1$ vertices, when $G$ is a path $P_n$, a cycle $C_n$, and a complete graph $K_n$. △ Less

Submitted 14 August, 2018; originally announced August 2018.

Comments: 29 pages, 16 figures

MSC Class: 05C15; 05C78

Novel Superconductivity in Endohedral Gallide Mo8Ga41

Authors: P. Neha, P. Sivaprakash, K. Ishigaki, G. Kalaiselvan, K. Manikandan, Y. Uwatoko, R. S. Dhaka, S. Arumugam, S. Patnaik

Abstract: We report on synthesis and characterization of gallide cluster based Mo8Ga41 superconductor. Transport and magnetization measurements confirm the superconducting transition temperature to be 9.8 K. The upper critical field, lower critical field, Ginzburg-Landau coherence length and penetration depth are estimated to be 11.8T, 150G, 5.2nm, 148nm respectively. The electronic band structure, density… ▽ More We report on synthesis and characterization of gallide cluster based Mo8Ga41 superconductor. Transport and magnetization measurements confirm the superconducting transition temperature to be 9.8 K. The upper critical field, lower critical field, Ginzburg-Landau coherence length and penetration depth are estimated to be 11.8T, 150G, 5.2nm, 148nm respectively. The electronic band structure, density of states and phonon dispersion curve calculations are obtained by using Density Functional Theory. The core level X-ray Photoelectron Spectroscopy (XPS) reveals the binding energy information of the constituting elements Mo and Ga in Mo8Ga41. The valence band spectra from XPS is in good agreement with calculated density of states (DOS). The zero field critical current density (Jc) at T = 2 K is ~ 3*10^5 A/cm^2 which is indicative of efficient flux pinning in the as grown compound. About two fold enhancement in critical current density with application of external pressure (1.1 GPa) is observed with marginal decrease in transition temperature. The fitting of current density to double exponential model confirms possibility of two gap superconductivity in Mo8Ga41. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Enhancing fluorescence excitation and collection from the nitrogen-vacancy center in diamond through a micro-concave mirror

Authors: Dewen Duan, Vinaya Kumar Kavatamane, Sri Ranjini Arumugam, Ganesh Rahane, Yan-Kai Tzeng, Huan-Cheng Chang, Hitoshi Sumiya, Shinobu Onoda, Junichi Isoya, Gopalakrishnan Balasubramanian

Abstract: We experimentally demonstrate a simple and robust optical fibers based method to achieve simultaneously efficient excitation and fluorescence collection from Nitrogen-Vacancy (NV) defects containing micro-crystalline diamond. We fabricate a suitable micro-concave (MC) mirror that focuses scattered excitation laser light into the diamond located at the focal point of the mirror. At the same instanc… ▽ More We experimentally demonstrate a simple and robust optical fibers based method to achieve simultaneously efficient excitation and fluorescence collection from Nitrogen-Vacancy (NV) defects containing micro-crystalline diamond. We fabricate a suitable micro-concave (MC) mirror that focuses scattered excitation laser light into the diamond located at the focal point of the mirror. At the same instance, the mirror also couples the fluorescence light exiting out of the diamond crystal in the opposite direction of the optical fiber back into the optical fiber within its light acceptance cone. This part of fluorescence would have been otherwise lost from reaching the detector. Our proof-of-principle demonstration achieves a 25 times improvement in fluorescence collection compared to the case of not using any mirrors. The increase in light collection favors getting high signal-to-noise ratio (SNR) optically detected magnetic resonance (ODMR) signals hence offers a practical advantage in fiber-based NV quantum sensors. Additionally, we compacted the NV sensor system by replacing some bulky optical elements in the optical path with a 1x2 fiber optical coupler in our optical system. This reduces the complexity of the system and provides portability and robustness needed for applications like magnetic endoscopy and remote-magnetic sensing. △ Less

Submitted 24 August, 2018; v1 submitted 12 April, 2018; originally announced April 2018.

Comments: 6 pages, 8 figures

Journal ref: Appl. Phys. Lett. 113, 041107 (2018)

Covert Communication over a K-User Multiple Access Channel

Authors: Keerthi Suria Kumar Arumugam, Matthieu R. Bloch

Abstract: We consider a scenario in which $K$ transmitters attempt to communicate covert messages reliably to a legitimate receiver over a discrete memoryless MAC while simultaneously escaping detection from an adversary who observes their communication through another discrete memoryless MAC. We assume that each transmitter may use a secret key that is shared only between itself and the legitimate receiver… ▽ More We consider a scenario in which $K$ transmitters attempt to communicate covert messages reliably to a legitimate receiver over a discrete memoryless MAC while simultaneously escaping detection from an adversary who observes their communication through another discrete memoryless MAC. We assume that each transmitter may use a secret key that is shared only between itself and the legitimate receiver. We show that each of the $K$ transmitters can transmit on the order of $\sqrt{n}$ reliable and covert bits per $n$ channel uses, exceeding which, the warden will be able to detect the communication. We identify the optimal pre-constants of the scaling, which leads to a complete characterization of the covert capacity region of the $K$-user binary-input MAC. We show that, asymptotically, all sum-rate constraints are inactive unlike the traditional MAC capacity region. We also characterize the channel conditions that have to be satisfied for the transmitters to operate without a secret key. △ Less

Submitted 7 June, 2019; v1 submitted 15 March, 2018; originally announced March 2018.

On $(k,d)$-Hooked Skolem Graceful Graphs

Authors: Jessica Pereira, Tarkeshwar Singh, S. Arumugam

Abstract: A graph $(p, q)$ graph $G = (V, E)$ is said to be $(k, d)$-hooked Skolem graceful if there exists a bijection $f:V (G)\rightarrow \{1, 2, \dots, p-1, p+1\}$ such that the induced edge labeling $g_f : E \rightarrow \{k, k+d, \dots, k+(n-1)d \}$ defined by $g_f (uv) = |f(u) - f(v)|$ $\forall uv \in E$ is also bijective, where $k$ and $d$ are positive integers. Such a labeling $f$ is called $(k, d)$-… ▽ More A graph $(p, q)$ graph $G = (V, E)$ is said to be $(k, d)$-hooked Skolem graceful if there exists a bijection $f:V (G)\rightarrow \{1, 2, \dots, p-1, p+1\}$ such that the induced edge labeling $g_f : E \rightarrow \{k, k+d, \dots, k+(n-1)d \}$ defined by $g_f (uv) = |f(u) - f(v)|$ $\forall uv \in E$ is also bijective, where $k$ and $d$ are positive integers. Such a labeling $f$ is called $(k, d)$-hooked Skolem graceful labeling of $G.$ Note that when $k = d = 1$, this notion coincides with that of Hooked Skolem (HS) graceful labeling of the graph G. In this paper, we present some preliminary results on $(k, d)$-hooked Skolem graceful graphs and prove that $nK_2$ is $(2, 1)$-hooked Skolem graceful if and only if $n \equiv 1~\mbox{or}~2(\bmod~ 4)$. △ Less

Submitted 18 May, 2017; originally announced May 2017.

Comments: Journal Paper consists of 9 pages

Journal ref: Journal of Combinatorics, Information and System Sciences 41 (2016) No. 1-2, 7-15

Evidence for conventional superconductivity in Sr0.1Bi2Se3 from high pressure studies

Authors: K. Manikandan, Shruti, P. Neha, V. Maurya, G. Kalai Selvan, B. Wang, Y. Uwatoko, K. Ishigaki, R. Jha, V. P. S. Awana, S. Arumugam, S. Patnaik

Abstract: SrxBi2Se3 is recently reported to be a superconductor derived from topological insulator Bi2Se3. It shows a maximum resistive Tc of 3.25 K at ambient pressure. We report magnetic (upto 1 GPa) and transport properties (upro 8 Gpa) under pressure for single crystalline Sr0.1Bi2Se3 superconductor. Magnetic measurements show that Tc decreases from ~2.6 K (0 GPa) to ~1.9 K (0.81 GPa). Similar behavior… ▽ More SrxBi2Se3 is recently reported to be a superconductor derived from topological insulator Bi2Se3. It shows a maximum resistive Tc of 3.25 K at ambient pressure. We report magnetic (upto 1 GPa) and transport properties (upro 8 Gpa) under pressure for single crystalline Sr0.1Bi2Se3 superconductor. Magnetic measurements show that Tc decreases from ~2.6 K (0 GPa) to ~1.9 K (0.81 GPa). Similar behavior is observed in transport properties as well without much change in the metallic characteristics in normal state resistivity. No reentrant superconducting phase (Physical Review B 93, 144514 (2016)) is observed at high pressure. Normal state resistivity near Tc is explained by Fermi liquid model. Above 100 K, a polaronic hopping conduction mechanism with two parallel channels for current flow is indicated. Band structure calculations indicate decreasing density of states at Fermi level with pressure. In consonance with transition temperature suppression in conventional BCS low Tc superconductors, the pressure effect in SrxBi2Se3 is well accounted by pressure induced band broadening. △ Less

Submitted 28 February, 2017; originally announced February 2017.

Superconductivity in Se-doped new materials EuSr2Bi2S4F4 and Eu2SrBi2S4F4

Authors: Zeba Haque, Gohil S. Thakur, Rainer Pöttgen, Ganesan Kalai Selvan, Rangasamy Parthasarathy, Sonachalam Arumugam, Laxmi Chand Gupta, Ashok Kumar Ganguli

Abstract: From our powder x ray diffraction pattern, electrical transport and magnetic studies we report the effect of isovalent Se substitution at S sites in the newly discovered systems EuSr2Bi2S4F4 and Eu2SrBi2S4F4. We have synthesized two new variants of 3244 type superconductor with Eu replaced by Sr which is reported elsewhere [Z. Haque et. al.]. We observe superconductivity at Tc 2.9 K (resistivity)… ▽ More From our powder x ray diffraction pattern, electrical transport and magnetic studies we report the effect of isovalent Se substitution at S sites in the newly discovered systems EuSr2Bi2S4F4 and Eu2SrBi2S4F4. We have synthesized two new variants of 3244 type superconductor with Eu replaced by Sr which is reported elsewhere [Z. Haque et. al.]. We observe superconductivity at Tc 2.9 K (resistivity) and 2.3 K (susceptibility) in EuSr2Bi2S4-xSexF4 series for x = 2. In the other series Eu2SrBi2S4-xSexF4, two materials (x= 1.5; Tc = 2.6 K and x = 2; Tc = 2.75 K) exhibit superconductivity. △ Less

Submitted 11 December, 2016; originally announced December 2016.

Comments: 4 pages, 9 figures

Unusual mixed valence of Eu in two new materials EuSr2Bi2S4F4 and Eu2SrBi2S4F4: Mössbauer and X-ray photoemission Spectroscopy investigations

Authors: Zeba Haque, Gohil Singh Thakur, Rangasamy Parthasarathy, Birgit Gerke, Theresa Block, Lukas Heletta, Rainer Pöttgen, Amish G. Joshi, Ganesan Kalai Selvan, Sonachalam Arumugam, Laxmi Chand Gupta, Ashok Kumar Ganguli

Abstract: We have synthesized two new Eu-based compounds, EuSr2Bi2S4F4 and Eu2SrBi2S4F4 which are derivatives of Eu3Bi2S4F4, an intrinsic superconductor with Tc = 1.5 K. They belong to a tetragonal structure (SG: I4/mmm, Z = 2), similar to the parent compound Eu3Bi2S4F4. Our structural and 151Eu Mössbauer spectroscopy studies show that in EuSr2Bi2S4F4, Eu-atoms exclusively occupy the crystallographic 2a-sit… ▽ More We have synthesized two new Eu-based compounds, EuSr2Bi2S4F4 and Eu2SrBi2S4F4 which are derivatives of Eu3Bi2S4F4, an intrinsic superconductor with Tc = 1.5 K. They belong to a tetragonal structure (SG: I4/mmm, Z = 2), similar to the parent compound Eu3Bi2S4F4. Our structural and 151Eu Mössbauer spectroscopy studies show that in EuSr2Bi2S4F4, Eu-atoms exclusively occupy the crystallographic 2a-sites. In Eu2SrBi2S4F4, 2a-sites are fully occupied by Eu-atoms and the other half of Eu-atoms and Sr-atoms together fully occupy 4e-sites in a statistical distribution. In both compounds Eu atoms occupying the crystallographic 2a-sites are in a homogeneous mixed valent state ~ 2.6 - 2.7. From our magnetization studies in an applied H = 9 Tesla, we infer that the valence of Eu-atoms in Eu2SrBi2S4F4 at the 2a-sites exhibits a shift towards 2+. Our XPS studies corroborate the occurrence of valence fluctuations of Eu and after Ar-ion sputtering show evidence of enhanced population of Eu2+-states. Resistivity measurements, down to 2 K suggest a semi-metallic nature for both compounds. △ Less

Submitted 2 December, 2016; originally announced December 2016.

Report number: ic-2016-01926s

Upper critical field, critical current density and activation energy of the new La1-xSmxOF0.5BiS2 (x = 0.2, 0.8) superconductor

Authors: G. Kalai Selvan, G. S. Thakur, K. Manikandan, Y. Uwatoko, Zeba Haque, L. C. Gupta, A. K. Ganguli, S. Arumugam

Abstract: Critical current density (Jc), thermal activation energy (U0), and upper critical field (Hc2) of La1-xSmxO0.5F0.5BiS2 (x = 0.2, 0.8) superconductors are investigated from magnetic field dependent \r{ho}(T) studies. The estimated upper critical field (Hc2) has low values of 1.04 T for x = 0.2 and 1.41 T for x = 0.8. These values are lower than Sm free LaO0.5F0.5BiS2 superconductor (1.9 T). The crit… ▽ More Critical current density (Jc), thermal activation energy (U0), and upper critical field (Hc2) of La1-xSmxO0.5F0.5BiS2 (x = 0.2, 0.8) superconductors are investigated from magnetic field dependent \r{ho}(T) studies. The estimated upper critical field (Hc2) has low values of 1.04 T for x = 0.2 and 1.41 T for x = 0.8. These values are lower than Sm free LaO0.5F0.5BiS2 superconductor (1.9 T). The critical current density (Jc) is estimated to be 1.35*105 A/cm2 and 5.07 *105 A/cm2 (2 K) for x = 0.2 and 0.8 respectively, using the Bean's model. The thermal activation energy (U0/kB) is 61 K for x = 0.2 and 140 K for x =0.8 as calculated from Arrhenius plots at low magnetic field (1 T) and indicates a strong flux pinning potential which might be co-existing with applied magnetic field. △ Less

Submitted 10 September, 2015; v1 submitted 22 July, 2015; originally announced July 2015.

Comments: 13 pages, 4 figures

Superconductivity in La1-xSmxO0.5F0.5BiS2 (x = 0.2, 0.8) under hydrostatic pressure

Authors: G. Kalai Selvan, Gohil Thakur, K. Manikandan, A. Banerjee, Zeba Haque, L. C. Gupta, Ashok Ganguli, S. Arumugam

Abstract: We have investigated the pressure effect on the newly discovered samarium doped La1-xSmxO0.5F0.5BiS2 superconductors. More than threefold increase in Tc (10.3 K) is observed with external pressure (at ~1.74 GPa at a rate of 4.08 K/GPa)) for x = 0.2 composition. There is a concomitant large improvement in the quality of the superconducting transition. Beyond this pressure Tc decreases monotonously… ▽ More We have investigated the pressure effect on the newly discovered samarium doped La1-xSmxO0.5F0.5BiS2 superconductors. More than threefold increase in Tc (10.3 K) is observed with external pressure (at ~1.74 GPa at a rate of 4.08 K/GPa)) for x = 0.2 composition. There is a concomitant large improvement in the quality of the superconducting transition. Beyond this pressure Tc decreases monotonously at the rate of -2.09 K/GPa. In the x = 0.8 sample, we do not observe any enhancement in Tc with application of pressure (up to 1.76 GPa). The semiconducting behavior observed in the normal state resistivity of both of the samples is significantly subdued with the application of pressure which, if interpreted invoking thermal activation process, implies that the activation energy gap of the carriers is significantly reduced with pressure. We believe these observations should generate further interest in the La1-xSmxO0.5F0.5BiS2 superconductors. △ Less

Submitted 16 March, 2016; v1 submitted 14 July, 2015; originally announced July 2015.

Comments: 17 pages, 5 figures

Synthesis and properties of SmO0.5F0.5BiS2 and enhancement in Tc in La1-ySmyO0.5F0.5BiS2

Authors: Gohil S. Thakur, G. Kalai Selvan, Zeba Haque, L. C. Gupta, S. L. Samal, S. Arumugam, Ashok K. Ganguli

Abstract: Crystal structure and properties of a new member of oxy-bismuth-sulfide SmO1-xFxBiS2 are reported here. The compounds SmO1-xFxBiS2 (x = 0.0 and 0.5) are found to be isostructural with LaOBiS2 and crystallize in the CeOBiS2 type structure (P4/nmm). Sm substitution in LaO0.5F0.5BiS2, (La1-ySmyO0.5F0.5BiS2), leads to a gradual decrease in a-lattice constant however the c-lattice constant does not sho… ▽ More Crystal structure and properties of a new member of oxy-bismuth-sulfide SmO1-xFxBiS2 are reported here. The compounds SmO1-xFxBiS2 (x = 0.0 and 0.5) are found to be isostructural with LaOBiS2 and crystallize in the CeOBiS2 type structure (P4/nmm). Sm substitution in LaO0.5F0.5BiS2, (La1-ySmyO0.5F0.5BiS2), leads to a gradual decrease in a-lattice constant however the c-lattice constant does not show such a gradual trend. Enhancement in Tc is achieved upon partially substituting La by smaller Sm ion. Maximum Tc ~ 4.6 K was observed for composition with y = 0.8. Disobeying this trend Tc disappears unexpectedly in composition SmO0.5F0.5BiS2 (y = 1.0). Both the undoped and F-doped (x = 0.0 and 0.5) compounds are paramagnetic exhibiting semiconducting behavior down to 2 K. △ Less

Submitted 12 January, 2015; v1 submitted 3 October, 2014; originally announced October 2014.

Comments: Accepted, Inorganic Chemistry (2015)

Journal ref: ACS Inorganic Chemistry, 2015, 54 (3), pp 1076

Hydrostatic pressures dependence of superconductivity in PrO0.5F0.5BiS2 superconductor

Authors: G. Kalai Selvan, M. Kanagaraj, Rajveer Jha, V. P. S. Awana, S. Arumugam

Abstract: In this communication, we report the temperature dependence (3 to 300K) of the electrical resistivity of BiS2 based layered PrO0.5F0.5BiS2 superconductor at ambient and hydrostatic pressure of up to 3GPa. It is observed that Tc increases with pressure at the rate of dTc/dP=0.45/GPa for PrO0.5F0.5BiS2 compound. It is envisaged that one may increase the Superconducting transition temperature (Tc) of… ▽ More In this communication, we report the temperature dependence (3 to 300K) of the electrical resistivity of BiS2 based layered PrO0.5F0.5BiS2 superconductor at ambient and hydrostatic pressure of up to 3GPa. It is observed that Tc increases with pressure at the rate of dTc/dP=0.45/GPa for PrO0.5F0.5BiS2 compound. It is envisaged that one may increase the Superconducting transition temperature (Tc) of recently discovered PrO0.5F0.5BiS2 superconductor by applying hydrostatic external or internal chemical pressure via suitable on site substitutions. △ Less

Submitted 18 July, 2013; originally announced July 2013.

Comments: 13 Pages text + Figs

Hydrostatic pressure effect on Tc of new BiS2 based Bi4O4S3 and NdO0.5F0.5BiS2 layered superconductors

Authors: G. Kalai Selvan, M. Kanagaraj, S. Esakki Muthu, Rajveer Jha, V. P. S. Awana, S. Arumugam

Abstract: We investigate the external hydrostatic pressure effect on the superconducting transition temperature (Tc) of new layered superconductors Bi4O4S3 and NdO0.5F0.5BiS2. Though the Tc is found to have moderate decrease from 4.8 K to 4.3 K (dTconset/dP = -0.28 K/GPa) for Bi4O4S3 superconductor, the same increases from 4.6 K to 5 K (dTconset/dP = 0.44 K/GPa) upto 1.31 GPa followed by a sudden decrease f… ▽ More We investigate the external hydrostatic pressure effect on the superconducting transition temperature (Tc) of new layered superconductors Bi4O4S3 and NdO0.5F0.5BiS2. Though the Tc is found to have moderate decrease from 4.8 K to 4.3 K (dTconset/dP = -0.28 K/GPa) for Bi4O4S3 superconductor, the same increases from 4.6 K to 5 K (dTconset/dP = 0.44 K/GPa) upto 1.31 GPa followed by a sudden decrease from 5 K to 4.7 K upto 1.75 GPa for NdO0.5F0.5BiS2 superconductor. The variation of Tc in these systems may be correlated to increase or decrease of the charge carriers in the density of states under externally applied pressure. △ Less

Submitted 17 July, 2013; v1 submitted 2 July, 2013; originally announced July 2013.

Comments: 3 pages text +Figs

Journal ref: Physica Status Solidi RRL 7,510(2013)

A spin ladder compound doubles its superconducting TC under a gentle uniaxial pressure

Authors: D. Mohan Radheep, R. Thiyagarjan, S. Esakkimuthu, Guochu Deng, E. Pomjakushina, C. L. Prajapat, G. Ravikumar, K. Conder, G. Baskaran, S. Arumugam

Abstract: Discovery of new high TC superconductors, with TC > 23 K, continues to be challenging. We have doubled the existing TC of single crystal Sr3Ca11Cu24O41, a spin ladder cuprate, from 12K to 24K, using a gentle uniaxial pressure ~ 0.06 GPa. In contrast, earlier works used a nearly 100 times larger hydrostatic pressure 5 GPa, only to reach a maximum TC ~ 12K. Our work exposes large and nearly equal, b… ▽ More Discovery of new high TC superconductors, with TC > 23 K, continues to be challenging. We have doubled the existing TC of single crystal Sr3Ca11Cu24O41, a spin ladder cuprate, from 12K to 24K, using a gentle uniaxial pressure ~ 0.06 GPa. In contrast, earlier works used a nearly 100 times larger hydrostatic pressure 5 GPa, only to reach a maximum TC ~ 12K. Our work exposes large and nearly equal, but opposing contributions to changes in TC, arising from compressions along and perpendicular to ladder planes, in hydrostatic pressure experiments. In our resistivity measurements, uniaxial pressure applied along ladder planes increase TC, while that perpendicular to ladder planes decrease TC. Our findings i) offers a new hope for further increase in TC in spin ladder compounds and ii) calls for a large shift in phase boundaries of the currently accepted pressure-temperature phase diagram. △ Less

Submitted 4 March, 2013; originally announced March 2013.

Comments: 5 figures and 24 pages

Threshold Based Indexing of Commercial Shoe Print to Create Reference and Recovery Images

Authors: S. Rathinavel, S. Arumugam

Abstract: One of the important evidence in a crime scene that is normally overlooked but very important evidence is shoe print as the criminal is normally unaware of the mask for this. In this paper we use image processing technique to process reference shoe images to make it index-able for a search from the database the shoe print impressions available in the commercial market. This is achieved first by… ▽ More One of the important evidence in a crime scene that is normally overlooked but very important evidence is shoe print as the criminal is normally unaware of the mask for this. In this paper we use image processing technique to process reference shoe images to make it index-able for a search from the database the shoe print impressions available in the commercial market. This is achieved first by converting the commercially available image through the process of converting them to gray scale then apply image enhancement and restoration techniques and finally do image segmentation to store the segmented parameter as index in the database storage. We use histogram method for image enhancement, inverse filtering for image restoration and threshold method for indexing. We use global threshold as index of the shoe print. The paper describes this method and simulation results are included to validate the method. △ Less

Submitted 29 January, 2010; originally announced January 2010.

Comments: 4 pages, 8 figures

Journal ref: InterJRI Computer Science and Networking, Volume 1, pp 49-52, 2009

Frequency dependence of dielectric anomaly around Neel temperature in bilayer manganite Pr(Sr0.1Ca0.9)2Mn2O7

Authors: Barnali Ghosh, Dipten Bhattacharya, A. K. Raychaudhuri, S. Arumugam

Abstract: A novel frequency dependence of anomaly in dielectric constant versus temperature plot, around the Neel temperature T_N (~150 K), has been observed in a single crystal of bilayer manganite Pr(Sr0.1Ca0.9)2Mn2O7. The anomaly in the permittivity (epsilon'||c) occurs at a temperature T_f which moves within a temperature window (delT_f) of ~40 K around T_N for a frequency range 50 kHz-5 MHz. The capa… ▽ More A novel frequency dependence of anomaly in dielectric constant versus temperature plot, around the Neel temperature T_N (~150 K), has been observed in a single crystal of bilayer manganite Pr(Sr0.1Ca0.9)2Mn2O7. The anomaly in the permittivity (epsilon'||c) occurs at a temperature T_f which moves within a temperature window (delT_f) of ~40 K around T_N for a frequency range 50 kHz-5 MHz. The capacitive component Cp of the dielectric response exhibits a clear yet broad feature around T_N which establishes the intrinsic capacitive nature of the anomaly. △ Less

Submitted 27 February, 2009; originally announced February 2009.

Comments: 15 pages with 4 figures; pdf only

Journal ref: J. Appl. Phys. 105, 123914 (2009)

Pressure-induced melting of the orbital polaron lattice in La1-xSrxMnO3

Authors: R. Klingeler, J. Geck, S. Arumugam, N. Tristan, P. Reutler, B. Buechner, L. Pinsard-Gaudart, A. Revcolevschi

Abstract: We report on the pressure effects on the orbital polaron lattice in the lightly doped manganites $\mathrm{La_{1-x}Sr_xMnO_{3}}$, with $x\sim 1/8$. The dependence of the orbital polaron lattice on $negative$ chemical pressure is studied by substituting Pr for La in $\mathrm{(La_{1-y}Pr_y)_{7/8}Sr_{1/8}MnO_{3}}$. In addition, we have studied its hydrostatic pressure dependence in… ▽ More We report on the pressure effects on the orbital polaron lattice in the lightly doped manganites $\mathrm{La_{1-x}Sr_xMnO_{3}}$, with $x\sim 1/8$. The dependence of the orbital polaron lattice on $negative$ chemical pressure is studied by substituting Pr for La in $\mathrm{(La_{1-y}Pr_y)_{7/8}Sr_{1/8}MnO_{3}}$. In addition, we have studied its hydrostatic pressure dependence in $\mathrm{(La_{0.9}Pr_{0.1})_{7/8}Sr_{1/8}MnO_{3}}$. Our results strongly indicate that the hopping $t$ significantly contributes to the stabilization of the orbital polaron lattice and that the orbital polarons are ferromagnetic objects which get stabilized by local double exchange processes. The analysis of short range orbital correlations and the verification of the Grueneisen scaling by hard x-ray, specific heat and thermal expansion data reinforces our conclusions. △ Less

Submitted 7 March, 2006; originally announced March 2006.

Comments: 7 figures

Journal ref: Phys. Rev. B 73, 214432 (2006)