-
Approaches to lowering the cost of large space telescopes
Authors:
Ewan S Douglas,
Greg Aldering,
Greg W. Allan,
Ramya Anche,
Roger Angel,
Cameron C. Ard,
Supriya Chakrabarti,
Laird M. Close,
Kevin Derby,
Jerry Edelstein,
John Ford,
Jessica Gersh-Range,
Sebastiaan Y. Haffert,
Patrick J. Ingraham,
Hyukmo Kang,
Douglas M. Kelly,
Daewook Kim,
Michael Lesser,
Jarron M. Leisenring,
Yu-Chia Lin,
Jared R. Males,
Buddy Martin,
Bianca Alondra Payan,
Sai Krishanth P. M.,
David Rubin
, et al. (4 additional authors not shown)
Abstract:
New development approaches, including launch vehicles and advances in sensors, computing, and software, have lowered the cost of entry into space, and have enabled a revolution in low-cost, high-risk Small Satellite (SmallSat) missions. To bring about a similar transformation in larger space telescopes, it is necessary to reconsider the full paradigm of space observatories. Here we will review the…
▽ More
New development approaches, including launch vehicles and advances in sensors, computing, and software, have lowered the cost of entry into space, and have enabled a revolution in low-cost, high-risk Small Satellite (SmallSat) missions. To bring about a similar transformation in larger space telescopes, it is necessary to reconsider the full paradigm of space observatories. Here we will review the history of space telescope development and cost drivers, and describe an example conceptual design for a low cost 6.5 m optical telescope to enable new science when operated in space at room temperature. It uses a monolithic primary mirror of borosilicate glass, drawing on lessons and tools from decades of experience with ground-based observatories and instruments, as well as flagship space missions. It takes advantage, as do large launch vehicles, of increased computing power and space-worthy commercial electronics in low-cost active predictive control systems to maintain stability. We will describe an approach that incorporates science and trade study results that address driving requirements such as integration and testing costs, reliability, spacecraft jitter, and wavefront stability in this new risk-tolerant "LargeSat" context.
△ Less
Submitted 19 October, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
The Potential of Sufficiency Measures to Achieve a Fully Renewable Energy System -- A case study for Germany
Authors:
Elmar Zozmann,
Mirjam Helena Eerma,
Dylan Manning,
Gro Lill Økland,
Citlali Rodriguez del Angel,
Paul E. Seifert,
Johanna Winkler,
Alfredo Zamora Blaumann,
Seyedsaeed Hosseinioun,
Leonard Göke,
Mario Kendziorski,
Christian von Hirschhausen
Abstract:
The paper provides energy system-wide estimates of the effects sufficiency measures in different sectors can have on energy supply and system costs. In distinction to energy efficiency, we define sufficiency as behavioral changes to reduce useful energy without significantly reducing utility, for example by adjusting thermostats. By reducing demand, sufficiency measures are a potentially decisive…
▽ More
The paper provides energy system-wide estimates of the effects sufficiency measures in different sectors can have on energy supply and system costs. In distinction to energy efficiency, we define sufficiency as behavioral changes to reduce useful energy without significantly reducing utility, for example by adjusting thermostats. By reducing demand, sufficiency measures are a potentially decisive but seldomly considered factor to support the transformation towards a decarbonized energy system. Therefore, this paper addresses the following question: What is the potential of sufficiency measures and what is their impacts on the supply side of a 100% renewable energy system? For this purpose, an extensive literature review is conducted to obtain estimates for the effects of different sufficiency measures on final energy demand in Germany. Afterwards, the impact of these measures on the supply side and system costs is quantified using a bottom-up planning model of a renewable energy system. Results indicate that final energy could be reduced by up to 20.5% and as a result cost reduction between 11.3% to 25.6% are conceivable. The greatest potential for sufficiency measures was identified in the heating sector.
△ Less
Submitted 8 September, 2021; v1 submitted 1 September, 2021;
originally announced September 2021.
-
ARGOS at the LBT. Binocular laser guided ground layer adaptive optics
Authors:
S. Rabien,
R. Angel,
L. Barl,
U. Beckmann,
L. Busoni,
S. Belli,
M. Bonaglia,
J. Borelli,
J. Brynnel,
P. Buschkamp,
A. Cardwel,
A. Contursi,
C. Connot,
R. Davies,
M. Deysenroth,
O. Durney,
F. Eisenhauer,
M. Elberich,
S. Esposito,
B. Frye,
W. Gaessler,
V. Gasho,
H. Gemperlein,
R. Genzel,
I. Y. Georgiev
, et al. (26 additional authors not shown)
Abstract:
Having completed its commissioning phase, the Advanced Rayleigh guided Ground-layer adaptive Optics System (ARGOS) facility is coming online for scientific observations at the Large Binocular Telescope (LBT). With six Rayleigh laser guide stars in two constellations and the corresponding wavefront sensing, ARGOS corrects the ground-layer distortions for both LBT 8.4m eyes with their adaptive secon…
▽ More
Having completed its commissioning phase, the Advanced Rayleigh guided Ground-layer adaptive Optics System (ARGOS) facility is coming online for scientific observations at the Large Binocular Telescope (LBT). With six Rayleigh laser guide stars in two constellations and the corresponding wavefront sensing, ARGOS corrects the ground-layer distortions for both LBT 8.4m eyes with their adaptive secondary mirrors. Under regular observing conditions, this set-up delivers a point spread function (PSF) size reduction by a factor of ~2--3 compared to a seeing-limited operation. With the two LUCI infrared imaging and multi-object spectroscopy instruments receiving the corrected images, observations in the near-infrared can be performed at high spatial and spectral resolution. We discuss the final ARGOS technical set-up and the adaptive optics performance. We show that imaging cases with ground-layer adaptive optics (GLAO) are enhancing several scientific programmes, from cluster colour magnitude diagrams and Milky Way embedded star formation, to nuclei of nearby galaxies or extragalactic lensing fields. In the unique combination of ARGOS with the multi-object near-infrared spectroscopy available in LUCI over a 4x4 arcmin field of view, the first scientific observations have been performed on local and high-z objects. Those high spatial and spectral resolution observations demonstrate the capabilities now at hand with ARGOS at the LBT.
△ Less
Submitted 7 January, 2019; v1 submitted 26 June, 2018;
originally announced June 2018.
-
Simultaneous Exoplanet Characterization and deep wide-field imaging with a diffractive pupil telescope
Authors:
Olivier Guyon,
Josh A. Eisner,
Roger Angel,
Neville J. Woolf,
Eduardo A. Bendek,
Thomas D. Milster,
Stephen M. Ammons,
Michael Shao,
Stuart Shaklan,
Marie Levine,
Bijan Nemati,
Frantz Martinache,
Joe Pitman,
Robert A. Woodruff,
Ruslan Belikov
Abstract:
High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by…
▽ More
High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
High precision astrometry with a diffractive pupil telescope
Authors:
Olivier Guyon,
Eduardo A. Bendek,
Thomas D. Milster,
Josh A. Eisner,
Roger Angel,
Neville J. Woolf,
Stephen M. Ammons,
Michael Shao,
Stuart Shaklan,
Marie Levine,
Bijan Nemati,
Joe Pitman,
Robert A. Woodruff,
Ruslan Belikov
Abstract:
Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction…
▽ More
Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction spikes using a two-dimensional grid of regularly spaced small dark spots added to the surface of the primary mirror (PM). Accurate astrometric motion of the host star is obtained by comparing the position of the spikes to the background field stars. The spikes do not contribute to scattered light in the central part of the field and therefore allow unperturbed coronagraphic observation of the star's immediate surrounding. Because the diffraction spikes are created on the PM and imaged on the same focal plane detector as the background stars, astrometric distortions affect equally the diffraction spikes and the background stars, and are therefore calibrated. We describe the technique, detail how the data collected by the wide-field camera are used to derive astrometric motion, and identify the main sources of astrometric error using numerical simulations and analytical derivations. We find that the 1.4 m diameter telescope, 0.3 sq.deg field we adopt as a baseline design achieves 0.2 microarcsec single measurement astrometric accuracy. The diffractive pupil concept thus enables sub-microarcsec astrometry without relying on the accurate pointing, external metrology or high stability hardware required with previously proposed high precision astrometry concepts.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
LSST Science Book, Version 2.0
Authors:
LSST Science Collaboration,
Paul A. Abell,
Julius Allison,
Scott F. Anderson,
John R. Andrew,
J. Roger P. Angel,
Lee Armus,
David Arnett,
S. J. Asztalos,
Tim S. Axelrod,
Stephen Bailey,
D. R. Ballantyne,
Justin R. Bankert,
Wayne A. Barkhouse,
Jeffrey D. Barr,
L. Felipe Barrientos,
Aaron J. Barth,
James G. Bartlett,
Andrew C. Becker,
Jacek Becla,
Timothy C. Beers,
Joseph P. Bernstein,
Rahul Biswas,
Michael R. Blanton,
Joshua S. Bloom
, et al. (223 additional authors not shown)
Abstract:
A survey that can cover the sky in optical bands over wide fields to faint magnitudes with a fast cadence will enable many of the exciting science opportunities of the next decade. The Large Synoptic Survey Telescope (LSST) will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 deg^2, and will be devoted to a ten-year imaging survey over 20,000 deg^2 south…
▽ More
A survey that can cover the sky in optical bands over wide fields to faint magnitudes with a fast cadence will enable many of the exciting science opportunities of the next decade. The Large Synoptic Survey Telescope (LSST) will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 deg^2, and will be devoted to a ten-year imaging survey over 20,000 deg^2 south of +15 deg. Each pointing will be imaged 2000 times with fifteen second exposures in six broad bands from 0.35 to 1.1 microns, to a total point-source depth of r~27.5. The LSST Science Book describes the basic parameters of the LSST hardware, software, and observing plans. The book discusses educational and outreach opportunities, then goes on to describe a broad range of science that LSST will revolutionize: mapping the inner and outer Solar System, stellar populations in the Milky Way and nearby galaxies, the structure of the Milky Way disk and halo and other objects in the Local Volume, transient and variable objects both at low and high redshift, and the properties of normal and active galaxies at low and high redshift. It then turns to far-field cosmological topics, exploring properties of supernovae to z~1, strong and weak lensing, the large-scale distribution of galaxies and baryon oscillations, and how these different probes may be combined to constrain cosmological models and the physics of dark energy.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.
-
Terrestrial Planet Finder Coronagraph (TPF-C) Flight Baseline Concept
Authors:
Marie Levine,
D. Lisman,
S. Shaklan,
J. Kasting,
W. Traub,
J. Alexander,
R. Angel,
C. Blaurock,
M. Brown,
R. Brown,
C. Burrows,
M. Clampin,
E. Cohen,
D. Content,
L. Dewell,
P. Dumont,
R. Egerman,
H. Ferguson,
V. Ford,
J. Greene,
O. Guyon,
H. Hammel,
S. Heap,
T. Ho,
S. Horner
, et al. (30 additional authors not shown)
Abstract:
The Terrestrial Planet Finder Coronagraph (TPF-C) mission presented here is an existence proof for a flagship-class internal coronagraph space mission capable of detecting and characterizing Earth-like planets and planetary systems at visible wavelengths around nearby stars, using an existing launch vehicle. TPF-C will use spectroscopy to measure key properties of exoplanets including the presen…
▽ More
The Terrestrial Planet Finder Coronagraph (TPF-C) mission presented here is an existence proof for a flagship-class internal coronagraph space mission capable of detecting and characterizing Earth-like planets and planetary systems at visible wavelengths around nearby stars, using an existing launch vehicle. TPF-C will use spectroscopy to measure key properties of exoplanets including the presence of atmospheric water or oxygen, powerful signatures in the search for habitable worlds.
△ Less
Submitted 16 November, 2009;
originally announced November 2009.
-
Coronagraphic Low Order Wavefront Sensor: Principle and Application to a Phase-Induced Amplitude Coronagraph
Authors:
Olivier Guyon,
Taro Matsuo,
Roger Angel
Abstract:
High contrast coronagraphic imaging of the immediate surrounding of stars requires exquisite control of low-order wavefront aberrations, such as tip-tilt (pointing) and focus. We propose an accurate, efficient and easy to implement technique to measure such aberrations in coronagraphs which use a focal plane mask to block starlight. The Coronagraphic Low Order Wavefront Sensor (CLOWFS) produces…
▽ More
High contrast coronagraphic imaging of the immediate surrounding of stars requires exquisite control of low-order wavefront aberrations, such as tip-tilt (pointing) and focus. We propose an accurate, efficient and easy to implement technique to measure such aberrations in coronagraphs which use a focal plane mask to block starlight. The Coronagraphic Low Order Wavefront Sensor (CLOWFS) produces a defocused image of a reflective focal plane ring to measure low order aberrations. Even for small levels of wavefront aberration, the proposed scheme produces large intensity signals which can be easily measured, and therefore does not require highly accurate calibration of either the detector or optical elements. The CLOWFS achieves nearly optimal sensitivity and is immune from non-common path errors. This technique is especially well suited for high performance low inner working angle (IWA) coronagraphs. On phase-induced amplitude apodization (PIAA) type coronagraphs, it can unambiguously recover aberrations which originate from either side of the beam shaping introduced by the PIAA optics. We show that the proposed CLOWFS can measure sub-milliarcsecond telescope pointing errors several orders of magnitude faster than would be possible in the coronagraphic science focal plane alone, and can also accurately calibrate residual coronagraphic leaks due to residual low order aberrations. We have demonstrated 1e-3 lambda/D pointing stability in a laboratory demonstration of the CLOWFS on a PIAA type coronagraph.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
Seeing another Earth: Detecting and Characterizing Rocky Planets with Extremely Large Telescopes
Authors:
Philip M. Hinz,
Scott Kenyon,
Michael R. Meyer,
Alan Boss,
Roger Angel
Abstract:
The detection of lower mass planets now being reported via radial velocity and microlensing surveys suggests that they may be ubiquitous. If missions such as Kepler are able to confirm this, the detection and study of rocky planets via direct imaging with ground-based telescopes of apertures > 20 m is feasible in the thermal infrared. We discuss two cases for detecting rocky planets, the first v…
▽ More
The detection of lower mass planets now being reported via radial velocity and microlensing surveys suggests that they may be ubiquitous. If missions such as Kepler are able to confirm this, the detection and study of rocky planets via direct imaging with ground-based telescopes of apertures > 20 m is feasible in the thermal infrared. We discuss two cases for detecting rocky planets, the first via detection of molten Earths formed though an Earth-Moon like impact event, and the second via detection of planets around very nearby stars. These observations have the potential to give us a first look at a rocky planet similar to the Earth.
△ Less
Submitted 23 February, 2009;
originally announced February 2009.
-
A cryogenic liquid-mirror telescope on the moon to study the early universe
Authors:
Roger Angel,
Simon P. Worden,
Ermanno F. Borra,
Daniel J. Eisenstein,
Bernard Foing,
Paul Hickson,
Jean-Luc Josset,
Ki Bui Ma,
Omar Seddiki,
Suresh Sivanandam,
Simon Thibault,
Paul van Susante
Abstract:
We have studied the feasibility and scientific potential of zenith observing liquid mirror telescopes having 20 to 100 m diameters located on the moon. They would carry out deep infrared surveys to study the distant universe and follow up discoveries made with the 6 m James Webb Space Telescope (JWST), with more detailed images and spectroscopic studies. They could detect objects 100 times faint…
▽ More
We have studied the feasibility and scientific potential of zenith observing liquid mirror telescopes having 20 to 100 m diameters located on the moon. They would carry out deep infrared surveys to study the distant universe and follow up discoveries made with the 6 m James Webb Space Telescope (JWST), with more detailed images and spectroscopic studies. They could detect objects 100 times fainter than JWST, observing the first, high-red shift stars in the early universe and their assembly into galaxies. We explored the scientific opportunities, key technologies and optimum location of such telescopes. We have demonstrated critical technologies. For example, the primary mirror would necessitate a high-reflectivity liquid that does not evaporate in the lunar vacuum and remains liquid at less than 100K: We have made a crucial demonstration by successfully coating an ionic liquid that has negligible vapor pressure. We also successfully experimented with a liquid mirror spinning on a superconducting bearing, as will be needed for the cryogenic, vacuum environment of the telescope. We have investigated issues related to lunar locations, concluding that locations within a few km of a pole are ideal for deep sky cover and long integration times. We have located ridges and crater rims within 0.5 degrees of the North Pole that are illuminated for at least some sun angles during lunar winter, providing power and temperature control. We also have identified potential problems, like lunar dust. Issues raised by our preliminary study demand additional in-depth analyses. These issues must be fully examined as part of a scientific debate we hope to start with the present article.
△ Less
Submitted 13 June, 2008;
originally announced June 2008.
-
LSST: from Science Drivers to Reference Design and Anticipated Data Products
Authors:
Željko Ivezić,
Steven M. Kahn,
J. Anthony Tyson,
Bob Abel,
Emily Acosta,
Robyn Allsman,
David Alonso,
Yusra AlSayyad,
Scott F. Anderson,
John Andrew,
James Roger P. Angel,
George Z. Angeli,
Reza Ansari,
Pierre Antilogus,
Constanza Araujo,
Robert Armstrong,
Kirk T. Arndt,
Pierre Astier,
Éric Aubourg,
Nicole Auza,
Tim S. Axelrod,
Deborah J. Bard,
Jeff D. Barr,
Aurelian Barrau,
James G. Bartlett
, et al. (288 additional authors not shown)
Abstract:
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the…
▽ More
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.
△ Less
Submitted 23 May, 2018; v1 submitted 15 May, 2008;
originally announced May 2008.
-
First On-Sky High Contrast Imaging with an Apodizing Phase Plate
Authors:
Matthew A. Kenworthy,
Johanan L. Codona,
Philip M. Hinz,
J. Roger P. Angel,
Ari Heinze,
Suresh Sivanandam
Abstract:
We present the first astronomical observations obtained with an Apodizing Phase Plate (APP). The plate is designed to suppress the stellar diffraction pattern by 5 magnitudes from 2-9 lambda/D over a 180 degree region. Stellar images were obtained in the M' band (4.85 microns) at the MMTO 6.5m telescope, with adaptive wavefront correction made with a deformable secondary mirror designed for low…
▽ More
We present the first astronomical observations obtained with an Apodizing Phase Plate (APP). The plate is designed to suppress the stellar diffraction pattern by 5 magnitudes from 2-9 lambda/D over a 180 degree region. Stellar images were obtained in the M' band (4.85 microns) at the MMTO 6.5m telescope, with adaptive wavefront correction made with a deformable secondary mirror designed for low thermal background observations. The measured PSF shows a halo intensity of 0.1% of the stellar peak at 2 lambda/D (0.36 arcsec), tapering off as r^{-5/3} out to radius 9 lambda/D. Such a profile is consistent with residual errors predicted for servo lag in the AO system.
We project a 5 sigma contrast limit, set by residual atmospheric fluctuations, of 10.2 magnitudes at 0.36 arcsec separation for a one hour exposure. This can be realised if static and quasi-static aberrations are removed by differential imaging, and is close to the sensitivity level set by thermal background photon noise for target stars with M'>3. The advantage of using the phase plate is the removal of speckle noise caused by the residuals in the diffraction pattern that remain after PSF subtraction. The APP gives higher sensitivity over the range 2-5 lambda/D compared to direct imaging techniques.
△ Less
Submitted 12 February, 2007;
originally announced February 2007.
-
Telescope to Observe Planetary Systems (TOPS): a high throughput 1.2-m visible telescope with a small inner working angle
Authors:
Olivier Guyon,
James R. P. Angel,
Charles Bowers,
James Burge,
Adam Burrows,
Johanan Codona,
Thomas Greene,
Masanori Iye,
James Kasting,
Hubert Martin,
Donald W. McCarthy, Jr.,
Victoria Meadows,
Michael Meyer,
Eugene A. Pluzhnik,
Norman Sleep,
Tony Spears,
Motohide Tamura,
Domenick Tenerelli,
Robert Vanderbei,
Bruce Woodgate,
Robert A. Woodruff,
Neville J. Woolf,
/
Abstract:
The Telescope to Observe Planetary Systems (TOPS) is a proposed space mission to image in the visible (0.4-0.9 micron) planetary systems of nearby stars simultaneously in 16 spectral bands (resolution R~20). For the ~10 most favorable stars, it will have the sensitivity to discover 2 R_E rocky planets within habitable zones and characterize their surfaces or atmospheres through spectrophotometry…
▽ More
The Telescope to Observe Planetary Systems (TOPS) is a proposed space mission to image in the visible (0.4-0.9 micron) planetary systems of nearby stars simultaneously in 16 spectral bands (resolution R~20). For the ~10 most favorable stars, it will have the sensitivity to discover 2 R_E rocky planets within habitable zones and characterize their surfaces or atmospheres through spectrophotometry. Many more massive planets and debris discs will be imaged and characterized for the first time. With a 1.2m visible telescope, the proposed mission achieves its power by exploiting the most efficient and robust coronagraphic and wavefront control techniques. The Phase-Induced Amplitude Apodization (PIAA) coronagraph used by TOPS allows planet detection at 2 lambda/d with nearly 100% throughput and preserves the telescope angular resolution. An efficient focal plane wavefront sensing scheme accurately measures wavefront aberrations which are fed back to the telescope active primary mirror. Fine wavefront control is also performed independently in each of 4 spectral channels, resulting in a system that is robust to wavefront chromaticity.
△ Less
Submitted 15 June, 2006;
originally announced June 2006.
-
Thermal Infrared Constraint to a Planetary Companion of Vega with the MMT Adaptive Optics System
Authors:
Philip M. Hinz,
A. N. Heinze,
Suresh Sivanandam,
Douglas L. Miller,
Matthew A. Kenworthy,
Guido Brusa,
Melanie Freed,
J. R. P. Angel
Abstract:
Vega may have a massive companion in a wide orbit, as evidenced by structure in its cold dust debris. We have tested this hypothesis by direct imaging with adaptive optics in the M band. The observations were made with a newly commissioned thermal infrared camera, Clio, on the 6.5 MMT AO system with low-background deformable secondary. The observations constrain a planet to be less than 7 M$_J$…
▽ More
Vega may have a massive companion in a wide orbit, as evidenced by structure in its cold dust debris. We have tested this hypothesis by direct imaging with adaptive optics in the M band. The observations were made with a newly commissioned thermal infrared camera, Clio, on the 6.5 MMT AO system with low-background deformable secondary. The observations constrain a planet to be less than 7 M$_J$ at the approximate position angle expected from the dust structure and at a radius $>$ 20AU (2.5 arcsec) . This result is more stringent than similar previous near-infrared observations of Vega, that achieve limits of 20 and 10 M$_J$ at separations of 7 arcsec. The higher sensitivity is due both to the more favorable contrast of gas giant planets at M band and to the higher Strehl and more stable point spread function at longer wavelengths. Future L' or M band observations could provide a powerful approach for wide separation planet detection, especially for cooler, and thus older or less massive planets. The natural best targets are nearby stars where planets in the range of 5-15 M$_J$ and as old as several Gyr are expected to be detectable with this technique.
△ Less
Submitted 6 June, 2006;
originally announced June 2006.
-
First tests of wavefront sensing with a constellation of laser guide beacons
Authors:
M. Lloyd-Hart,
C. Baranec,
N. M. Milton,
T. Stalcup,
M. Snyder,
N. Putnam,
J. R. P. Angel
Abstract:
Adaptive optics to correct current telescopes over wide fields, or future very large telescopes over even narrow fields, will require real-time wavefront measurements made with a constellation of laser beacons. Here we report the first such measurements, made at the 6.5 m MMT with five Rayleigh beacons in a 2 arcmin pentagon. Each beacon is made with a pulsed beam at 532 nm, of 4 W at the exit p…
▽ More
Adaptive optics to correct current telescopes over wide fields, or future very large telescopes over even narrow fields, will require real-time wavefront measurements made with a constellation of laser beacons. Here we report the first such measurements, made at the 6.5 m MMT with five Rayleigh beacons in a 2 arcmin pentagon. Each beacon is made with a pulsed beam at 532 nm, of 4 W at the exit pupil of the projector. The return is range-gated from 20-29 km and recorded at 53 Hz by a 36-element Shack-Hartmann sensor. Wavefronts derived from the beacons are compared with simultaneous wavefronts obtained for individual natural stars within or near the constellation. Observations were made in seeing averaging 1.0 arcsec with 2/3 of the aberration measured to be from a ground layer of mean height 380 m. Under these conditions, subtraction of the simple instantaneous average of the five beacon wavefronts from the stellar wavefronts yielded a 40% rms reduction in the measured modes of the distortion over a 2 arcmin field. We discuss the use of multiple Rayleigh beacons as an alternative to single sodium beacons on 8 m telescopes, and the impact of the new work on the design of a multi-sodium beacon system for the 25 m Giant Magellan Telescope.
△ Less
Submitted 19 August, 2005; v1 submitted 19 August, 2005;
originally announced August 2005.
-
Adaptive Optics Nulling Interferometric Constraints on the Mid-Infrared Exozodiacal Dust Emission around Vega
Authors:
W. M. Liu,
P. M. Hinz,
W. F. Hoffmann,
G. Brusa,
F. Wildi,
D. Miller,
M. Lloyd-Hart,
M. A. Kenworthy,
P. C. McGuire,
J. R. P. Angel
Abstract:
We present the results of mid-infrared nulling interferometric observations of the main-sequence star alpha Lyr (Vega) using the 6.5 m MMT with its adaptive secondary mirror. From the observations at 10.6 microns, we find that there is no resolved emission from the circumstellar environment (at separations greater than 0.8 AU) above 2.1% (3 sigma limit) of the level of the stellar photospheric e…
▽ More
We present the results of mid-infrared nulling interferometric observations of the main-sequence star alpha Lyr (Vega) using the 6.5 m MMT with its adaptive secondary mirror. From the observations at 10.6 microns, we find that there is no resolved emission from the circumstellar environment (at separations greater than 0.8 AU) above 2.1% (3 sigma limit) of the level of the stellar photospheric emission. Thus, we are able to place an upper limit on the density of dust in the inner system of 650 times that of our own solar system's zodiacal cloud. This limit is roughly 2.8 times better than those determined with photometric excess observations such as those by IRAS. Comparison with far-infrared observations by IRAS shows that the density of warm dust in the inner system (< 30 AU) is significantly lower than cold dust at larger separations. We consider two scenarios for grain removal, the sublimation of ice grains and the presence of a planetary mass "sweeper." We find that if sublimation of ice grains is the only removal process, a large fraction (> 80%) of the material in the outer system is ice.
△ Less
Submitted 25 June, 2004;
originally announced June 2004.
-
Imaging extrasolar planets by stellar halo suppression in separately-corrected color bands
Authors:
Johanan L. Codona,
Roger Angel
Abstract:
Extra-solar planets have not been imaged directly with existing ground or space telescopes because they are too faint to be seen against the halo of the nearby bright star. Most techniques being explored to suppress the halo are achromatic, with separate correction of diffraction and wavefront errors. Residual speckle structure may be subtracted by differencing images taken through narrowband fi…
▽ More
Extra-solar planets have not been imaged directly with existing ground or space telescopes because they are too faint to be seen against the halo of the nearby bright star. Most techniques being explored to suppress the halo are achromatic, with separate correction of diffraction and wavefront errors. Residual speckle structure may be subtracted by differencing images taken through narrowband filters, but photon noise remains and ultimately limits sensitivity. Here we describe two ways to take advantage of narrow bands to reduce speckle photon flux and to obtain better control of systematic errors. Multiple images are formed in separate color bands of 5-10% bandwidth, and recorded by coronagraphic interferometers equipped with active control of wavefront phase and/or amplitude. In one method, a single deformable pupil mirror is used to actively correct both diffraction and wavefront components of the halo. This yields good diffraction suppression for complex pupil obscuration, with high throughput over half the focal plane. In a second method, the coronagraphic interferometer is used as a second stage after conventional apodization. The halo from uncontrollable residual errors in the pupil mask or wavefront is removed by destructive interference made directly at the detector focal plane with an "anti-halo", synthesized by spatial light modulators in the reference arm of the interferometer. In this way very deep suppression may be achieved by control elements with greatly relaxed, and thus achievable, tolerances. In both examples, systematic errors are minimized because the planet imaging cameras themselves also provide the error sensing data.
△ Less
Submitted 17 February, 2004;
originally announced February 2004.
-
Mid-Infrared Imaging of the Post-AGB Star AC Herculis with the MMT Adaptive Optics System
Authors:
Laird M. Close,
Beth Biller,
William F. Hoffmann,
Phil M. Hinz,
John H. Bieging,
Francois Wildi,
Michael Lloyd-Hart,
Guido Brusa,
Don Fisher,
Doug Miller,
Roger Angel
Abstract:
We utilized the MMT's unique deformable secondary adaptive optics system to produce high-resolution (FWHM=0.3"), very high Strehl mid-infrared (9.8, 11.7 & 18 micron) images of the post-AGB star AC Her. The very high (98+/-2%) Strehls achieved with Mid-IR AO led naturally to an ultra-stable PSF independent of airmass, seeing, or location on the sky. We find no significant difference between AC H…
▽ More
We utilized the MMT's unique deformable secondary adaptive optics system to produce high-resolution (FWHM=0.3"), very high Strehl mid-infrared (9.8, 11.7 & 18 micron) images of the post-AGB star AC Her. The very high (98+/-2%) Strehls achieved with Mid-IR AO led naturally to an ultra-stable PSF independent of airmass, seeing, or location on the sky. We find no significant difference between AC Her's morphology and our unresolved PSF calibration stars (mu UMa & alpha Her) at 9.8, 11.7, & 18 microns. Our current observations do not confirm any extended Mid-IR structure around AC Her. These observations are in conflict with previously reported Keck (seeing-limited) 11.7 and 18 micron images which suggested the presence of a resolved ~0.6" edge-on circumbinary disk. We conclude that AC Her has no extended Mid-IR structure on scales greater than 0.2" (R<75 AU). These first results of Mid-IR AO science are very encouraging for future high accuracy Mid-IR imaging with this technique.
△ Less
Submitted 20 October, 2003;
originally announced October 2003.
-
High Resolution Images of Orbital Motion in the Trapezium Cluster: First Scientific Results from the MMT Deformable Secondary Mirror Adaptive Optics System
Authors:
Laird M. Close,
Francois Wildi,
Michael Lloyd-Hart,
Guido Brusa,
Don Fisher,
Doug Miller,
Armando Riccardi,
Piero Salinari,
Donald W. McCarthy,
Roger Angel,
Rich Allen,
H. M. Martin,
Richard G. Sosa,
Manny Montoya,
Matt Rademacher,
Mario Rascon,
Dylan Curley,
Nick Siegler,
Wolfgang J. Duschl
Abstract:
We present the first scientific images obtained with a deformable secondary mirror adaptive optics system. We utilized the 6.5m MMT AO system to produce high-resolution (FWHM=0.07'') near infrared (1.6 um) images of the young (~1 Myr) Orion Trapezium theta 1 Ori cluster members. A combination of high spatial resolution and high signal to noise allowed the positions of these stars to be measured…
▽ More
We present the first scientific images obtained with a deformable secondary mirror adaptive optics system. We utilized the 6.5m MMT AO system to produce high-resolution (FWHM=0.07'') near infrared (1.6 um) images of the young (~1 Myr) Orion Trapezium theta 1 Ori cluster members. A combination of high spatial resolution and high signal to noise allowed the positions of these stars to be measured to within ~0.003'' accuracies. Including previous speckle data (Weigelt et al. 1999), we analyze a six year baseline of high-resolution observations of this cluster. Over this baseline we are sensitive to relative proper motions of only ~0.002''/yr (4.2 km/s at 450 pc). At such sensitivities we detect orbital motion in the very tight theta 1 Ori B2B3 (52 AU separation) and theta 1 Ori A1A2 (94 AU separation) systems. Such motions are consistent with those independently observed by Schertl et al. (2003) with speckle interferometry, giving us confidence that these very small (~0.002''/yr) orbital motions are real. All five members of the theta 1 Ori B system appear likely gravitationally bound. The very lowest mass member of the theta 1 Ori B system (B4) has K' ~11.66 and an estimated mass of ~0.2 Msun. There was very little motion (4+/-15 km/s) detected of B4 w.r.t B1 or B2, hence B4 is possibly part of the theta 1 Ori B group. We suspect that if this very low mass member is physically associated it most likely is in an unstable (non-hierarchical) orbital position and will soon be ejected from the group. The theta 1 Ori B system appears to be a good example of a star formation ``mini-cluster'' which may eject the lowest mass members of the cluster in the near future. This ``ejection'' process could play a major role in the formation of low mass stars and brown dwarfs.
△ Less
Submitted 29 August, 2003;
originally announced September 2003.
-
An Optical Ultra-High-Resolution Cross-dispersed Echelle Spectrograph with Adaptive Optics
Authors:
Jian Ge,
J. R. P. Angel,
B. Jacobsen,
N. Woolf,
R. Q. Fugate,
J. H. Black
Abstract:
A prototype cross-dispersed optical echelle spectrograph of very high resolution has been designed and built at Steward Observatory and tested at the Starfire Optical Range (SOR) 1.5 m telescope. It is the first spectrograph to take advantage of diffraction-limited images provided by adaptive optics in order to achieve a potential resolving power of $R \sim 600,000$. The wavelength coverage in a…
▽ More
A prototype cross-dispersed optical echelle spectrograph of very high resolution has been designed and built at Steward Observatory and tested at the Starfire Optical Range (SOR) 1.5 m telescope. It is the first spectrograph to take advantage of diffraction-limited images provided by adaptive optics in order to achieve a potential resolving power of $R \sim 600,000$. The wavelength coverage in a single exposure is about 300 Å, which is approximately 100 times that of conventional spectrographs operating at comparable resolution. This was achieved by recording 60 cross-dispersed orders across the $18\times 18$ mm$^2$ area of the CCD detector. The total efficiency of the system, including the sky and telescope transmission, spectrograph and CCD detector, is measured to be 1.3% at peak, much higher than that of other ultra-high-resolution spectrographs. Sample stellar spectra with $R \sim 250,000$ are presented.
△ Less
Submitted 26 April, 2002;
originally announced April 2002.
-
Gliese 569B: A young multiple brown dwarf system?
Authors:
M. A. Kenworthy,
K-H. Hofmann,
L. Close,
P. Hinz,
E. Mamajek,
D. Schertl,
G. Weigelt,
R. Angel,
Y. Y. Balega,
J. Hinz,
G. Rieke
Abstract:
The nearby late M star Gliese 569B was recently found by adaptive optics imaging to be a double with separation ~1 AU. To explore the orbital motion and masses, we have undertaken a high resolution (~0.05 arcsec) astrometric study. Images were obtained over 1.5 years with bispectrum speckle interferometry at the 6.5m MMT and 6m SAO telescopes. Our data show motion corresponding to more than half…
▽ More
The nearby late M star Gliese 569B was recently found by adaptive optics imaging to be a double with separation ~1 AU. To explore the orbital motion and masses, we have undertaken a high resolution (~0.05 arcsec) astrometric study. Images were obtained over 1.5 years with bispectrum speckle interferometry at the 6.5m MMT and 6m SAO telescopes. Our data show motion corresponding to more than half the orbital period, and constrain the total mass to be > 0.115 M_solar, with a most probable value of 0.145 M_solar. Higher masses cannot be excluded without more extended observations, but from statistical analysis we find an 80% probability that the total mass is less than 0.21 M_solar.
An infrared spectrum of the blended B double obtained with the MMT has been modeled as a blend of two different spectral types, chosen to be consistent with the measured J and K band brightness difference of a factor ~2. The blended fit is not nearly as good as that to a pure M8.5+ template. Therefore we hypothesize that the brighter component likely has two unresolved components with near equal masses, each the same as the fainter component.
If Gl 569B is a triple our dynamical limits suggest each component has a mass of 50 (+23/-4) M_jupiter. We infer an age for the system of 300 Myr, from its kinematic motion which places its as a member of the Ursa Major moving group. All the above parameters are consistent with the latest DUSTY evolutiuon models for brown dwarfs.
△ Less
Submitted 9 May, 2001;
originally announced May 2001.
-
The Dark Matter Telescope
Authors:
J. A. Tyson,
David Wittman,
J. R. P. Angel
Abstract:
Weak gravitational lensing enables direct reconstruction of dark matter maps over cosmologically significant volumes. This research is currently telescope-limited. The Dark Matter Telescope (DMT) is a proposed 8.4 m telescope with a 3 degree field of view, with an etendue of 260 $(m. degree)^2$, ten times greater than any other current or planned telescope. With its large etendue and dedicated o…
▽ More
Weak gravitational lensing enables direct reconstruction of dark matter maps over cosmologically significant volumes. This research is currently telescope-limited. The Dark Matter Telescope (DMT) is a proposed 8.4 m telescope with a 3 degree field of view, with an etendue of 260 $(m. degree)^2$, ten times greater than any other current or planned telescope. With its large etendue and dedicated observational mode, the DMT fills a nearly unexplored region of parameter space and enables projects that would take decades on current facilities. The DMT will be able to reach 10-sigma limiting magnitudes of 27-28 magnitude in the wavelength range .3 - 1 um over a 7 square degree field in 3 nights of dark time. Here we review its unique weak lensing cosmology capabilities and the design that enables those capabilities.
△ Less
Submitted 25 July, 2000; v1 submitted 18 May, 2000;
originally announced May 2000.
-
Verifying Mirror Technology for NGST with a Space-Qualified, Cryogenic 3.5 M Mirror
Authors:
Roger Angel,
Jim Burge
Abstract:
The lightweighting and surface accuracy targeted for NGST's 8 m primary mirror has been demonstrated in a 0.5 m prototype. Now a second, 2 m prototype weighing 40 kg in total is being fabricated at the University of Arizona under the NGST NMSD program. It will be tested in cryogenic operation in spring 1999. A third, advanced mirror system demonstrator (AMSD) is needed, the full size of an NGST…
▽ More
The lightweighting and surface accuracy targeted for NGST's 8 m primary mirror has been demonstrated in a 0.5 m prototype. Now a second, 2 m prototype weighing 40 kg in total is being fabricated at the University of Arizona under the NGST NMSD program. It will be tested in cryogenic operation in spring 1999. A third, advanced mirror system demonstrator (AMSD) is needed, the full size of an NGST segment, for flight qualification, including launch survival and extremely high reliability. The 3.5 m mirror, 1/6 the weight of HST's primary, would be made with a 2 mm thick glass face-sheet attached by adjustable screws to a carbon composite support. It would be figured as a fast telescope primary, and fully tested cryogenically to verify closed loop figure stability with simulated infrared starlight. If started in early 1999, this could be completed in 2001. Construction of the NGST mirror panels could then be undertaken on the basis of proven technology, and in time for a 2007 launch.
With a diameter of 3.5 m and a weight of only 140 kg, the mirror could be incorporated into a telescope and launched to a high orbit by the Shuttle or number of other vehicles. Such a space mission would complement those already planned for scaled down tests of the unfolding of the NGST mirror segments (NEXUS) and the sunshade (ISIS). Much would be learned by running the mirror at cryogenic temperature, with a new infrared array to make preliminary observations in the 2 - 4 microns dark sky window, and a CCD to check optical image quality. This mission would be independent of the NGST, but would lay the scientific groundwork for the much more powerful telescope, as well as giving practical experience of mirror operation.
△ Less
Submitted 11 August, 1998;
originally announced August 1998.
-
The range of masses and periods explored by radial velocity searches for planetary companions
Authors:
A. F. Nelson,
J. R. P. Angel
Abstract:
In this paper we develop an analytical expression relating the sensitivity to a periodic signal to the duration and accuracy of a given set of data. The effects of windowing are explored, and also the sensitivity to periods longer than the total length of observations. As specific examples, we outline the performance of our technique on large amplitude and large eccentricity radial velocity sign…
▽ More
In this paper we develop an analytical expression relating the sensitivity to a periodic signal to the duration and accuracy of a given set of data. The effects of windowing are explored, and also the sensitivity to periods longer than the total length of observations. As specific examples, we outline the performance of our technique on large amplitude and large eccentricity radial velocity signals recently discussed in the literature and we delineate the region explored by the measurements of 14 single stars made over a twelve year period by Walker et al. (1995). Had any of these stars shown motion like that caused by the exo-planets recently detected, it would have been easily detected. Finally, we suggest an observing strategy for future large radial velocity surveys which, if implemented, will allow coverage of the largest range of parameter space with the smallest amount of observing time per star. We suggest that about 10-15 measurements be made of each star in the first two years of the survey, then 2--3 measurements per year thereafter, provided no (or slow) variation is observed. More frequent observations would of course be indicated if such variations were present.
△ Less
Submitted 13 February, 1998;
originally announced February 1998.
-
Mesosphere Sodium Column Density and the Sodium Laser Guide Star Brightness
Authors:
Jian Ge,
J. R. P. Angel,
B. D. Jacobsen,
T. Roberts,
T. Martinez,
W. Livingston,
B. McLeod,
M. Lloyd-Hart,
P. McGuire,
R. Noyes
Abstract:
The first time simultaneous measurements of sodium column density and the absolute flux from a sodium laser guide star, created by a monochromatic 3 W cw laser, tuned to the peak of the sodium D2 hyperfine structure, were conducted at the MMT and CFA 60 inch telescope in 1997. The results show that linearly and circularly polarized laser returns are proportional to the simultaneous sodium column…
▽ More
The first time simultaneous measurements of sodium column density and the absolute flux from a sodium laser guide star, created by a monochromatic 3 W cw laser, tuned to the peak of the sodium D2 hyperfine structure, were conducted at the MMT and CFA 60 inch telescope in 1997. The results show that linearly and circularly polarized laser returns are proportional to the simultaneous sodium column density. Moreover, circularly polarized laser provides about 30% increase in fluorescent return over linearly polarized laser. A laser guide star with R = 10.3 mag. or absolute flux of 8.4x10^5 photons/s/m^2, could be formed from a 1 watt projected circularly polarized sodium laser beam when sodium layer abundance N(Na) = 3.7x10^9 /cm^2. Together with the distributed column density measurements (e.g. seasonal and diurnal variations), we can project laser power requirements for any specified guide star brightness.
The mesosphere sodium column density variation was measured above Tucson sky throughout the year, through sodium absorption line measurements in stellar and solar spectra. Previous measurements, e.g. Papen et al, 1996, have not been made at this latitude (32 degrees). Further, our absorption method is more direct and may be more accurate than the lidar methods normally used. The seasonal variation amplitude is smaller than that at higher latitudes. While the annual mean sodium column density tends to be lower than at higher latitudes. Diurnal sodium column density tends to vary by as much as a factor of two within an hour.
△ Less
Submitted 29 August, 1997;
originally announced August 1997.
-
Adaptive Optics Spectroscopy: Preliminary Theoretical Results
Authors:
Jian Ge,
Roger Angel,
David Sandler,
Chris Shelton,
Don McCarthy,
Jim Burge
Abstract:
We have done theoretical calculations and simulations for infrared spectroscopy at the MMT 6.5 m with laser guide star AO, which provides almost full sky coverage. The results show we can expect 40-60% of the photons from a unresolved source within 0.2 arcsec diameter circle for J, H, K, L and M bands under typical atmospheric seeing condition at 2.2 micron. Therefore, the spectrograph entrance…
▽ More
We have done theoretical calculations and simulations for infrared spectroscopy at the MMT 6.5 m with laser guide star AO, which provides almost full sky coverage. The results show we can expect 40-60% of the photons from a unresolved source within 0.2 arcsec diameter circle for J, H, K, L and M bands under typical atmospheric seeing condition at 2.2 micron. Therefore, the spectrograph entrance slit size should match the 0.2 arcsec image to obtain high throughput. Higher resolution can be achieved by narrowing down the slit size to match the diffraction-limited image core size of about 0.1 arcsec in the infrared. However, the throughput will be correspondingly reduced by a factor of two. Due to the limited atmospheric isoplanatic angle in the J, H and K bands, the encircled photon percentage within 0.2 arcsec diameter drops from 40-60% when the object is at the laser pointing direction to 20-40% when the object is about 30 arcsec away from the laser direction. Therefore, the useful field of view for AO multiple object spectroscopy is about 60 arcsec. Further studies of IR background (sky and thermal) and IR detector performance show that spectral resolution of R = 2,000 can take full advantage of AO images without much penalty due to the dark current of the IR detector and IR OH sky emission lines.
We have also studied natural guide star AO spectroscopy. More details are in the paper.
△ Less
Submitted 12 August, 1997;
originally announced August 1997.
-
An Optical Ultrahigh Resolution Spectrograph for Use with Adaptive Optics
Authors:
J. Ge,
B. Jacobsen,
J. R. P. Angel,
N. Woolf,
J. H. Black,
M. Lloyd-Hart,
P. Gray,
R. Q. Fugate
Abstract:
A prototype ultrahigh resolution spectrograph has been built with an adaptive optics telescope. It provides $250,000$ resolving power, 300 Å wavelength coverage and 0.8\% efficiency.
A prototype ultrahigh resolution spectrograph has been built with an adaptive optics telescope. It provides $250,000$ resolving power, 300 Å wavelength coverage and 0.8\% efficiency.
△ Less
Submitted 29 July, 1996;
originally announced July 1996.